newlib-cygwin/libgloss/or1k/or1k_uart.c

83 lines
2.0 KiB
C

/* or1k_uart.c -- UART implementation for OpenRISC 1000.
*
*Copyright (c) 2014 Authors
*
* Contributor Stefan Wallentowitz <stefan.wallentowitz@tum.de>
*
* The authors hereby grant permission to use, copy, modify, distribute,
* and license this software and its documentation for any purpose, provided
* that existing copyright notices are retained in all copies and that this
* notice is included verbatim in any distributions. No written agreement,
* license, or royalty fee is required for any of the authorized uses.
* Modifications to this software may be copyrighted by their authors
* and need not follow the licensing terms described here, provided that
* the new terms are clearly indicated on the first page of each file where
* they apply.
*/
#include "include/or1k-support.h"
#include "or1k_uart.h"
#include <stdint.h>
void (*_or1k_uart_read_cb)(char c);
void _or1k_uart_interrupt_handler(uint32_t data)
{
_or1k_uart_read_cb(REG8(RB));
}
int _or1k_uart_init(void)
{
uint16_t divisor;
// Is uart present?
if (!_or1k_board_uart_base) {
return -1;
}
// Reset the callback function
_or1k_uart_read_cb = 0;
// Calculate and set divisor
divisor = _or1k_board_clk_freq / (_or1k_board_uart_baud * 16);
REG8(LCR) = LCR_DLA;
REG8(DLB1) = divisor & 0xff;
REG8(DLB2) = divisor >> 8;
// Set line control register:
// - 8 bits per character
// - 1 stop bit
// - No parity
// - Break disabled
// - Disallow access to divisor latch
REG8(LCR) = LCR_BPC_8;
// Reset FIFOs and set trigger level to 14 bytes
REG8(FCR) = FCR_CLRRECV | FCR_CLRTMIT | FCR_TRIG_14;
// Disable all interrupts
REG8(IER) = 0;
return 0;
}
void _or1k_uart_write(char c)
{
while (!REG8(LSR) & LSR_TFE) {}
REG8(THR) = c;
}
void or1k_uart_set_read_cb(void (*cb)(char c))
{
_or1k_uart_read_cb = cb;
// Enable interrupt
REG8(IER) = 1 << IER_RDAI;
or1k_interrupt_handler_add(_or1k_board_uart_IRQ,
_or1k_uart_interrupt_handler, 0);
or1k_interrupt_enable(_or1k_board_uart_IRQ);
}