newlib-cygwin/winsup/doc/cygserver.xml

248 lines
8.5 KiB
XML

<?xml version="1.0" encoding='UTF-8'?>
<!DOCTYPE sect1 PUBLIC "-//OASIS//DTD DocBook V4.5//EN"
"http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd">
<sect1 id="using-cygserver"><title>Cygserver</title>
<sect2 id="what-is-cygserver"><title>What is Cygserver?</title>
<para>
Cygserver is a program which is designed to run as a background service.
It provides Cygwin applications with services which require security
arbitration or which need to persist while no other cygwin application
is running.
</para>
<para>
The implemented services so far are:
</para>
<itemizedlist mark="bullet">
<listitem><para>XSI IPC Message Queues.</para></listitem>
<listitem><para>XSI IPC Semaphores.</para></listitem>
<listitem><para>XSI IPC Shared Memory.</para></listitem>
<listitem><para>Allows non-privileged users to store obfuscated
passwords in the registry to be used by <command>setuid</command> and
<command>seteuid</command> calls to create user tokens with network
credentials. This service is used by <command><link
linkend="passwd">passwd</link> -R</command>. Using the stored
passwords in <command>set(e)uid</command> does not require running
Cygserver. For details, see <xref linkend="ntsec-setuid-overview"></xref>.
</para></listitem>
</itemizedlist>
</sect2>
<sect2 id="cygserver-command-line"><title>Cygserver command line options</title>
<para>
Options to Cygserver take the normal UNIX-style `-X' or `--longoption' form.
Nearly all options have a counterpart in the configuration file (see below)
so setting them on the command line isn't really necessary. Command line
options override settings from the Cygserver configuration file.
</para>
<para>
The one-character options are prepended by a single dash, the long variants
are prepended with two dashes. Arguments to options are marked in angle
brackets below. These are not part of the actual syntax but are used only to
denote the arguments. Note that all arguments are required. Cygserver
has no options with optional arguments.
</para>
<para>
The recognized options are:
</para>
<itemizedlist spacing="compact">
<listitem>
<screen>-f, --config-file &lt;file&gt;</screen>
<para>
Use &lt;file&gt; as configuration file instead of the default configuration
line. The default configuration file is /etc/cygserver.conf.
The --help and --version options will print the default configuration
pathname.
</para>
<para>
This option has no counterpart in the configuration file, for obvious
reasons.
</para>
</listitem>
<listitem>
<screen>-c, --cleanup-threads &lt;num&gt;</screen>
<para>
Number of threads started to perform cleanup tasks. Default is 2.
Configuration file option: kern.srv.cleanup_threads
</para>
</listitem>
<listitem>
<screen>-r, --request-threads &lt;num&gt;</screen>
<para>
Number of threads started to serve application requests. Default is 10.
The -c and -r options can be used to play with Cygserver's performance
under heavy load conditions or on slow machines.
Configuration file option: kern.srv.request_threads
</para>
</listitem>
<listitem>
<screen>-d, --debug</screen>
<para>
Log debug messages to stderr. These will clutter your stderr output with
a lot of information, typically only useful to developers.
</para>
</listitem>
<listitem>
<screen>-e, --stderr</screen>
<para>
Force logging to stderr. This is the default if stderr is connected to
a tty. Otherwise, the default is logging to the system log. By using
the -e, -E, -y, -Y options (or the appropriate settings in the
configuration file), you can explicitly set the logging output as you
like, even to both, stderr and syslog.
Configuration file option: kern.log.stderr
</para>
</listitem>
<listitem>
<screen>-E, --no-stderr</screen>
<para>
Don't log to stderr. Configuration file option: kern.log.stderr
</para>
</listitem>
<listitem>
<screen>-y, --syslog</screen>
<para>
Force logging to the system log. This is the default, if stderr is not
connected to a tty, e. g. redirected to a file.
Configuration file option: kern.log.syslog
</para>
</listitem>
<listitem>
<screen>-Y, --no-syslog</screen>
<para>
Don't log to syslog. Configuration file option: kern.log.syslog
</para>
</listitem>
<listitem>
<screen>-l, --log-level &lt;level&gt;</screen>
<para>
Set the verbosity level of the logging output. Valid values are between
1 and 7. The default level is 6, which is relatively chatty. If you set
it to 1, you will get only messages which are printed under severe conditions,
which will result in stopping Cygserver itself.
Configuration file option: kern.log.level
</para>
</listitem>
<listitem>
<screen>-m, --no-sharedmem</screen>
<para>
Don't start XSI IPC Shared Memory support. If you don't need XSI IPC
Shared Memory support, you can switch it off here.
Configuration file option: kern.srv.sharedmem
</para>
</listitem>
<listitem>
<screen>-q, --no-msgqueues</screen>
<para>
Don't start XSI IPC Message Queues.
Configuration file option: kern.srv.msgqueues
</para>
</listitem>
<listitem>
<screen>-s, --no-semaphores</screen>
<para>
Don't start XSI IPC Semaphores.
Configuration file option: kern.srv.semaphores
</para>
</listitem>
<listitem>
<screen>-S, --shutdown</screen>
<para>
Shutdown a running daemon and exit. Other methods are sending a SIGHUP
to the Cygserver PID or, if running as service, calling `net stop
cygserver' or `cygrunsrv -E cygserver'.
</para>
</listitem>
<listitem>
<screen>-h, --help</screen>
<para>
Output usage information and exit.
</para>
</listitem>
<listitem>
<screen>-V, --version</screen>
<para>
Output version information and exit.
</para>
</listitem>
</itemizedlist>
</sect2>
<sect2 id="install-cygserver"><title>How to install Cygserver</title>
<para>
Cygserver is part of the base <emphasis role='bold'>cygwin</emphasis> package.
Therefore, whenever Cygwin is installed, so is Cygserver.
</para>
<para>
You may want to install Cygserver as a service. See
<xref linkend="start-cygserver"></xref>.
</para>
</sect2>
<sect2 id="start-cygserver"><title>How to start Cygserver</title>
<para>
Before you run Cygserver for the first time, you should run the
/usr/bin/cygserver-config script once. It creates the default
configuration file and, upon request, installs Cygserver as service.
The script only performs a default install, with no further options
given to Cygserver when running as service. Due to the wide
configurability by changing the configuration file, that's typically
not necessary.
</para>
<para>
You should always run Cygserver as a service under LocalSystem account.
This is the way it is installed for you by the /usr/bin/cygserver-config
script.
</para>
</sect2>
<sect2 id="cygserver-config"><title>The Cygserver configuration file</title>
<para>
Cygserver has many options, which allow you to customize the server
to your needs. Customization is accomplished by editing the configuration
file, which is by default /etc/cygserver.conf. This file is only read
once, at startup of Cygserver. There's no option to re-read the file at
runtime by, say, sending a signal to Cygserver.
</para>
<para>
The configuration file determines how Cygserver operates. There are
options which set the number of threads running in parallel, options
for setting how and what to log and options to set various maximum
values for the IPC services.
</para>
<para>
The default configuration file delivered with Cygserver is installed
to /etc/defaults/etc. The /usr/bin/cygserver-config script copies it to
/etc, giving you the option to overwrite an already existing file or to
leave it alone. Therefore, the /etc file is safe to be changed by you,
since it will not be overwritten by a later update installation.
</para>
<para>
The default configuration file contains many comments which describe
everything needed to understand the settings. A comment at the start of the
file describes the syntax rules for the file. The default options are shown
in the file but are commented out.
</para>
<para>
It is generally a good idea to uncomment only options which you intend to
change from the default values. Since reading the options file on Cygserver
startup doesn't take much time, it's also considered good practice to keep
all other comments in the file. This keeps you from searching for clues
in other sources.
</para>
</sect2>
</sect1>