newlib-cygwin/libgloss/cris/gensyscalls

#! /bin/sh
#  Copyright (C) 2005, 2018, 2023 Axis Communications.
#  All rights reserved.
#
#  Redistribution and use in source and binary forms, with or without
#  modification, are permitted provided that the following conditions
#  are met:
#
#  1. Redistributions of source code must retain the above copyright
#     notice, this list of conditions and the following disclaimer.
#
#  2. Neither the name of Axis Communications nor the names of its
#     contributors may be used to endorse or promote products derived
#     from this software without specific prior written permission.
#
#  THIS SOFTWARE IS PROVIDED BY AXIS COMMUNICATIONS AND ITS CONTRIBUTORS
#  ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
#  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
#  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL AXIS
#  COMMUNICATIONS OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
#  INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
#  (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
#  SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
#  HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
#  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
#  IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
#  POSSIBILITY OF SUCH DAMAGE.

# To avoid an abundance of copyright/license messages for boilerplate
# code, we instead generate them from this file.  Generating the
# function code could also be done automatically, but at the cost of
# slightly more intricate build machinery and/or scattered syscall
# information.  Beware that the cat-lines must match the sed regexp
# "^cat > \([^ ]*\).*".

lu='/* -*- buffer-read-only: t -*-
   THIS FILE IS AUTOMATICALLY GENERATED
   FROM "'$0'".  */
#include "linunistd.h"
#define R(x) return (x); }
'
lui="$lu int"
lul="$lu long int"
r=") { R (_Sys_"

cat > close.c <<EOF
$lui _close (int fd${r}close (fd))
EOF
cat > execve.c <<EOF
$lui _execve (const char *path, char * const *argv, char *const *env${r}execve (path, argv, env))
EOF
cat > exit.c <<EOF
$lu void _exit (int val) { _Sys_exit (val); /* Appease GCC: */ while (1) ; }
EOF
cat > fcntl.c <<EOF
$lui _fcntl (int fd, int cmd, long arg${r}fcntl (fd, cmd, arg))
EOF
cat > fork.c <<EOF
$lui _fork (void${r}fork ())
EOF
cat > fstat.c <<EOF
$lu#include <string.h>
#include <sys/stat.h>
#undef st_atime
#undef st_mtime
#undef st_ctime
int
_fstat (int fd, struct stat *buf)
{
  struct new_stat ks;
  int retval = _Sys_fstat (fd, &ks);

  /* Blank before filling it in.  */
  memset (buf, 0, sizeof (*buf));

  /* We have to translate from the linux struct new_stat.
     It seems we don't have to translate the contents, though.  */
  buf->st_dev = ks.st_dev;
  buf->st_ino = ks.st_ino;
  buf->st_mode = ks.st_mode;
  buf->st_nlink = ks.st_nlink;
  buf->st_uid = ks.st_uid;
  buf->st_gid = ks.st_gid;
  buf->st_rdev = ks.st_rdev;
  buf->st_size = ks.st_size;
  buf->st_blksize = ks.st_blksize;
  buf->st_blocks = ks.st_blocks;
  buf->st_atim.tv_sec = ks.st_atime;
  buf->st_mtim.tv_sec = ks.st_mtime;
  buf->st_ctim.tv_sec = ks.st_ctime;
  R (retval)
EOF
cat > getpid.c <<EOF
$lui _getpid (void${r}getpid ())
EOF
cat > gettod.c <<EOF
$lu#include <sys/time.h>
#include <sys/times.h>
int
_gettimeofday (struct timeval *tp, void *tzp)
{
  struct kernel_timeval kt;
  int retval = _Sys_gettimeofday(&kt, tzp);
  if (retval == 0)
  {
    tp->tv_sec = kt.tv_sec;
    tp->tv_usec = kt.tv_usec;
  }
  R (retval)
EOF
cat > isatty.c <<EOF
$lu
typedef unsigned int tcflag_t;
typedef unsigned char cc_t;
#define NCCS 19

struct termios {
	tcflag_t c_iflag;		/* input mode flags */
	tcflag_t c_oflag;		/* output mode flags */
	tcflag_t c_cflag;		/* control mode flags */
	tcflag_t c_lflag;		/* local mode flags */
	cc_t c_line;			/* line discipline */
	cc_t c_cc[NCCS];		/* control characters */
};

/* From asm-etrax100/ioctls.h: beware of updates.  */
#define TCGETS          0x5401

int
_isatty (int fd)
{
  struct termios dummy;
  int save_errno = errno;
  int ret = _Sys_ioctl (fd, TCGETS, (unsigned long) &dummy);
  errno = save_errno;
  R (ret == 0)
EOF
cat > kill.c <<EOF
$lui _kill (int pid, int sig${r}kill (pid, sig))
EOF
cat > link.c <<EOF
$lui _link (const char *old, const char *new${r}link (old, new))
EOF
cat > lseek.c <<EOF
$lul _lseek (int fd, long int offset, int whence${r}lseek (fd, offset, whence))
EOF
cat > open.c <<EOF
$lui _open (const char *fnam, int flags, int mode${r}open (fnam, flags, mode))
EOF
cat > read.c <<EOF
$lui _read (int fd, void *buf, unsigned long int nbytes${r}read (fd, buf, nbytes))
EOF
cat > rename.c <<EOF
$lui _rename (const char *old, const char *new${r}rename (old, new))
EOF
cat > sbrk.c <<EOF
$lu
/* From asm-etrax100/mman.h: beware of updates.  */
#define PROT_READ	0x1		/* page can be read */
#define PROT_WRITE	0x2		/* page can be written */
#define MAP_ANONYMOUS	0x20		/* don't use a file */
void *
_sbrk (long int d)
{
  static long last_alloc = 0;

  /* FIXME: Things are a whole lot different than elinux.  */
#ifdef __elinux__

  /* We can't promise linear memory from a predetermined location.
     We're NO_MM.  We're paria.  We have to rely on tweaks and unclean
     behavior.  We abuse the fact that the malloc function in newlib
     accepts nonlinear chunks in return to its sbrk calls (with a minor
     patch).  */

  /* We use an "old" type mmap, which takes a pointer to a vector of 6
     longs where the parameters are stored.  */
  long buffer[6];

  /* We can't return memory.  Well we could, but we would have to keep a
     list of previous allocations.  FIXME:  Seems reasonable to do that
     later.  */
  if (d < 0)
    return (char *) last_alloc;

  buffer[3] = MAP_ANONYMOUS;    /* Not associated with a file.  */
  buffer[4] = -1;               /* No file.  */
  buffer[0] = 0;                /* Address 0: let mmap pick one.  */
  buffer[1] = d;                /* Length.  */
  buffer[2] = (PROT_READ | PROT_WRITE); /* Protection flags.  */
  buffer[5] = 0;                /* Offset into file.  */

  last_alloc = _Sys_mmap (buffer);

  return (char *) last_alloc;

#else /* not __elinux__ */

  long prev_brk;

  if (last_alloc == 0)
  {
    last_alloc = _Sys_brk (0);

    if (last_alloc < 0)
      return (char *) -1;
  }

  prev_brk = last_alloc;

  if (_Sys_brk (last_alloc + d) < last_alloc + d)
    return (char *) -1;

  last_alloc += d;

  return (char *) prev_brk;
#endif
}
EOF
cat > stat.c <<EOF
$lu#include <string.h>
#include <sys/stat.h>
#undef st_atime
#undef st_mtime
#undef st_ctime
int
_stat (const char *path, struct stat *buf)
{
  struct new_stat ks;
  int retval = _Sys_stat (path, &ks);

  /* Blank before filling it in.  */
  memset (buf, 0, sizeof (*buf));

  /* We have to translate from the linux struct new_stat.
     It seems we don't have to translate the contents, though.  */
  buf->st_dev = ks.st_dev;
  buf->st_ino = ks.st_ino;
  buf->st_mode = ks.st_mode;
  buf->st_nlink = ks.st_nlink;
  buf->st_uid = ks.st_uid;
  buf->st_gid = ks.st_gid;
  buf->st_rdev = ks.st_rdev;
  buf->st_size = ks.st_size;
  buf->st_blksize = ks.st_blksize;
  buf->st_blocks = ks.st_blocks;
  buf->st_atim.tv_sec = ks.st_atime;
  buf->st_mtim.tv_sec = ks.st_mtime;
  buf->st_ctim.tv_sec = ks.st_ctime;
  R (retval)
EOF
cat > times.c <<EOF
$lu#include <sys/times.h>
clock_t
_times (struct tms * tp${r}times (tp))
EOF
cat > unlink.c <<EOF
$lui _unlink (const char *f${r}unlink (f))
EOF
cat > wait.c <<EOF
$lui _wait (int *status${r}wait4 (_getpid(), status, 0, 0))
EOF
cat > write.c <<EOF
$lui _write (int fd, const void *buf, unsigned long int nbytes${r}write (fd, buf, nbytes))
EOF
exit 0