/* memset for the Visium processor.

   Copyright (c) 2015 Rolls-Royce Controls and Data Services Limited.
   All rights reserved.

   Redistribution and use in source and binary forms, with or without
   modification, are permitted provided that the following conditions are met:

     * Redistributions of source code must retain the above copyright notice,
       this list of conditions and the following disclaimer.
     * Redistributions in binary form must reproduce the above copyright
       notice, this list of conditions and the following disclaimer in the
       documentation and/or other materials provided with the distribution.
     * Neither the name of Rolls-Royce Controls and Data Services Limited nor
       the names of its contributors may be used to endorse or promote products
       derived from this software without specific prior written permission.

   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
   ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
   LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
   CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
   SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
   INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
   CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
   THE POSSIBILITY OF SUCH DAMAGE.  */

/* This file must be kept in sync with libgcc/config/visium/memset.c  */

#include <stddef.h>
#include "memset.h"
#include "../../string/local.h"

#define SET_32_OBJECTS(out)	\
do {				\
  out [0] = m0;			\
  out [1] = m0;			\
  out [2] = m0;			\
  out [3] = m0;			\
  out [4] = m0;			\
  out [5] = m0;			\
  out [6] = m0;			\
  out [7] = m0;			\
  out [8] = m0;			\
  out [9] = m0;			\
  out [10] = m0;		\
  out [11] = m0;		\
  out [12] = m0;		\
  out [13] = m0;		\
  out [14] = m0;		\
  out [15] = m0;		\
  out [16] = m0;		\
  out [17] = m0;		\
  out [18] = m0;		\
  out [19] = m0;		\
  out [20] = m0;		\
  out [21] = m0;		\
  out [22] = m0;		\
  out [23] = m0;		\
  out [24] = m0;		\
  out [25] = m0;		\
  out [26] = m0;		\
  out [27] = m0;		\
  out [28] = m0;		\
  out [29] = m0;		\
  out [30] = m0;		\
  out [31] = m0;		\
  out += 32;			\
} while(0)

#define SET_16_OBJECTS(out)	\
do {				\
  out [0] = m0;			\
  out [1] = m0;			\
  out [2] = m0;			\
  out [3] = m0;			\
  out [4] = m0;			\
  out [5] = m0;			\
  out [6] = m0;			\
  out [7] = m0;			\
  out [8] = m0;			\
  out [9] = m0;			\
  out [10] = m0;		\
  out [11] = m0;		\
  out [12] = m0;		\
  out [13] = m0;		\
  out [14] = m0;		\
  out [15] = m0;		\
  out += 16;			\
} while(0)

#define SET_12_OBJECTS(out)	\
do {				\
  out [0] = m0;			\
  out [1] = m0;			\
  out [2] = m0;			\
  out [3] = m0;			\
  out [4] = m0;			\
  out [5] = m0;			\
  out [6] = m0;			\
  out [7] = m0;			\
  out [8] = m0;			\
  out [9] = m0;			\
  out [10] = m0;		\
  out [11] = m0;		\
  out += 12;			\
} while(0)

#define SET_11_OBJECTS(out)	\
do {				\
  out [0] = m0;			\
  out [1] = m0;			\
  out [2] = m0;			\
  out [3] = m0;			\
  out [4] = m0;			\
  out [5] = m0;			\
  out [6] = m0;			\
  out [7] = m0;			\
  out [8] = m0;			\
  out [9] = m0;			\
  out [10] = m0;		\
  out += 11;			\
} while(0)

#define SET_10_OBJECTS(out)	\
do {				\
  out [0] = m0;			\
  out [1] = m0;			\
  out [2] = m0;			\
  out [3] = m0;			\
  out [4] = m0;			\
  out [5] = m0;			\
  out [6] = m0;			\
  out [7] = m0;			\
  out [8] = m0;			\
  out [9] = m0;			\
  out += 10;			\
} while(0)

#define SET_9_OBJECTS(out)	\
do {				\
  out [0] = m0;			\
  out [1] = m0;			\
  out [2] = m0;			\
  out [3] = m0;			\
  out [4] = m0;			\
  out [5] = m0;			\
  out [6] = m0;			\
  out [7] = m0;			\
  out [8] = m0;			\
  out += 9;			\
} while(0)

#define SET_8_OBJECTS(out)	\
do {				\
  out [0] = m0;			\
  out [1] = m0;			\
  out [2] = m0;			\
  out [3] = m0;			\
  out [4] = m0;			\
  out [5] = m0;			\
  out [6] = m0;			\
  out [7] = m0;			\
  out += 8;			\
} while(0)

#define SET_7_OBJECTS(out)	\
do {				\
  out [0] = m0;			\
  out [1] = m0;			\
  out [2] = m0;			\
  out [3] = m0;			\
  out [4] = m0;			\
  out [5] = m0;			\
  out [6] = m0;			\
  out += 7;			\
} while(0)

#define SET_6_OBJECTS(out)	\
do {				\
  out [0] = m0;			\
  out [1] = m0;			\
  out [2] = m0;			\
  out [3] = m0;			\
  out [4] = m0;			\
  out [5] = m0;			\
  out += 6;			\
} while(0)

#define SET_5_OBJECTS(out)	\
do {				\
  out [0] = m0;			\
  out [1] = m0;			\
  out [2] = m0;			\
  out [3] = m0;			\
  out [4] = m0;			\
  out += 5;			\
} while(0)

#define SET_4_OBJECTS(out)	\
do {				\
  out [0] = m0;			\
  out [1] = m0;			\
  out [2] = m0;			\
  out [3] = m0;			\
  out += 4;			\
} while(0)

#define SET_3_OBJECTS(out)	\
do {				\
  out [0] = m0;			\
  out [1] = m0;			\
  out [2] = m0;			\
  out += 3;			\
} while(0)

#define SET_2_OBJECTS(out)	\
do {				\
  out [0] = m0;			\
  out [1] = m0;			\
  out += 2;			\
} while(0)

#define SET_1_OBJECT(out)	\
do {				\
  out [0] = m0;			\
  out += 1;			\
} while(0)

static inline void
__inhibit_loop_to_libcall
__int_memset (void *__restrict s1, int val, size_t n)
{
  int value = n;
  int loop_var;
  int *out = s1;
  int count;
  int m0 = val;

  /* This code currently give a stall for any value with a 1->2 in the low 5
     bits, i.e.  1,2, 33,34 ? not acceptable!  */
  switch (value & 0x1f)
    {
    case 0:
      break;
    case 1:
      SET_1_OBJECT (out);
      break;
    case 2:
      SET_2_OBJECTS (out);
      break;
    case 3:
      SET_3_OBJECTS (out);
      break;
    case 4:
      SET_4_OBJECTS (out);
      break;
    case 5:
      SET_5_OBJECTS (out);
      break;
    case 6:
      SET_6_OBJECTS (out);
      break;
    case 7:
      SET_7_OBJECTS (out);
      break;
    case 8:
      SET_8_OBJECTS (out);
      break;
    case 9:
      SET_9_OBJECTS (out);
      break;
    case 10:
      SET_10_OBJECTS (out);
      break;
    case 11:
      SET_11_OBJECTS (out);
      break;
    case 12:
      SET_12_OBJECTS (out);
      break;
    case 13:
      SET_9_OBJECTS (out);
      SET_4_OBJECTS (out);
      break;
    case 14:
      SET_12_OBJECTS (out);
      SET_2_OBJECTS (out);
      break;
    case 15:
      SET_11_OBJECTS (out);
      SET_4_OBJECTS (out);
      break;
    case 16:
      SET_16_OBJECTS (out);
      break;
    case 17:
      SET_11_OBJECTS (out);
      SET_6_OBJECTS (out);
      break;
    case 18:
      SET_9_OBJECTS (out);
      SET_9_OBJECTS (out);
      break;
    case 19:
      SET_16_OBJECTS (out);
      SET_3_OBJECTS (out);
      break;
    case 20:
      SET_16_OBJECTS (out);
      SET_4_OBJECTS (out);
      break;
    case 21:
      SET_16_OBJECTS (out);
      SET_5_OBJECTS (out);
      break;
    case 22:
      SET_16_OBJECTS (out);
      SET_6_OBJECTS (out);
      break;
    case 23:
      SET_16_OBJECTS (out);
      SET_7_OBJECTS (out);
      break;
    case 24:
      SET_16_OBJECTS (out);
      SET_8_OBJECTS (out);
      break;
    case 25:
      SET_16_OBJECTS (out);
      SET_9_OBJECTS (out);
      break;
    case 26:
      SET_16_OBJECTS (out);
      SET_10_OBJECTS (out);
      break;
    case 27:
      SET_16_OBJECTS (out);
      SET_11_OBJECTS (out);
      break;
    case 28:
      SET_16_OBJECTS (out);
      SET_8_OBJECTS (out);
      SET_4_OBJECTS (out);
      break;
    case 29:
      SET_16_OBJECTS (out);
      SET_9_OBJECTS (out);
      SET_4_OBJECTS (out);
      break;
    case 30:
      SET_16_OBJECTS (out);
      SET_12_OBJECTS (out);
      SET_2_OBJECTS (out);
      break;
    case 31:
      SET_16_OBJECTS (out);
      SET_11_OBJECTS (out);
      SET_4_OBJECTS (out);
      break;
    }

  /* This loop governs the asmptoptic behaviour of this algorithm, for long
     word copies.  */
  count = value >> 5;
  for (loop_var = 0; loop_var < count; loop_var++)
    SET_32_OBJECTS (out);
}

static inline void
__inhibit_loop_to_libcall
__short_int_memset (void *__restrict s1, int val, size_t n)
{
  int value = n;
  int loop_var;
  int short *out = s1;
  int count;
  int m0 = val;

  /* This code currently give a stall for any value with a 1->2 in the low 5
     bits, i.e.  1,2, 33,34 ? not acceptable!  */
  switch (value & 0x1f)
    {
    case 0:
      break;
    case 1:
      SET_1_OBJECT (out);
      break;
    case 2:
      SET_2_OBJECTS (out);
      break;
    case 3:
      SET_3_OBJECTS (out);
      break;
    case 4:
      SET_4_OBJECTS (out);
      break;
    case 5:
      SET_5_OBJECTS (out);
      break;
    case 6:
      SET_6_OBJECTS (out);
      break;
    case 7:
      SET_7_OBJECTS (out);
      break;
    case 8:
      SET_8_OBJECTS (out);
      break;
    case 9:
      SET_9_OBJECTS (out);
      break;
    case 10:
      SET_10_OBJECTS (out);
      break;
    case 11:
      SET_11_OBJECTS (out);
      break;
    case 12:
      SET_12_OBJECTS (out);
      break;
    case 13:
      SET_9_OBJECTS (out);
      SET_4_OBJECTS (out);
      break;
    case 14:
      SET_12_OBJECTS (out);
      SET_2_OBJECTS (out);
      break;
    case 15:
      SET_11_OBJECTS (out);
      SET_4_OBJECTS (out);
      break;
    case 16:
      SET_16_OBJECTS (out);
      break;
    case 17:
      SET_11_OBJECTS (out);
      SET_6_OBJECTS (out);
      break;
    case 18:
      SET_9_OBJECTS (out);
      SET_9_OBJECTS (out);
      break;
    case 19:
      SET_16_OBJECTS (out);
      SET_3_OBJECTS (out);
      break;
    case 20:
      SET_16_OBJECTS (out);
      SET_4_OBJECTS (out);
      break;
    case 21:
      SET_16_OBJECTS (out);
      SET_5_OBJECTS (out);
      break;
    case 22:
      SET_16_OBJECTS (out);
      SET_6_OBJECTS (out);
      break;
    case 23:
      SET_16_OBJECTS (out);
      SET_7_OBJECTS (out);
      break;
    case 24:
      SET_16_OBJECTS (out);
      SET_8_OBJECTS (out);
      break;
    case 25:
      SET_16_OBJECTS (out);
      SET_9_OBJECTS (out);
      break;
    case 26:
      SET_16_OBJECTS (out);
      SET_10_OBJECTS (out);
      break;
    case 27:
      SET_16_OBJECTS (out);
      SET_11_OBJECTS (out);
      break;
    case 28:
      SET_16_OBJECTS (out);
      SET_8_OBJECTS (out);
      SET_4_OBJECTS (out);
      break;
    case 29:
      SET_16_OBJECTS (out);
      SET_9_OBJECTS (out);
      SET_4_OBJECTS (out);
      break;
    case 30:
      SET_16_OBJECTS (out);
      SET_12_OBJECTS (out);
      SET_2_OBJECTS (out);
      break;
    case 31:
      SET_16_OBJECTS (out);
      SET_11_OBJECTS (out);
      SET_4_OBJECTS (out);
      break;
    }

  /* This loop governs the asmptoptic behaviour of this algorithm, for long
     word copies.  */
  count = value >> 5;
  for (loop_var = 0; loop_var < count; loop_var++)
    SET_32_OBJECTS (out);
}

static inline void
__inhibit_loop_to_libcall
__byte_memset (void *__restrict s1, int val, size_t n)
{
  int value = n;
  int loop_var;
  char *out = s1;
  int count;
  int m0 = val;

  /* This code currently give a stall for any value with a 1->2 in the low 5
     bits, i.e.  1,2, 33,34 ? not acceptable!  */
  switch (value & 0x1f)
    {
    case 0:
      break;
    case 1:
      SET_1_OBJECT (out);
      break;
    case 2:
      SET_2_OBJECTS (out);
      break;
    case 3:
      SET_3_OBJECTS (out);
      break;
    case 4:
      SET_4_OBJECTS (out);
      break;
    case 5:
      SET_5_OBJECTS (out);
      break;
    case 6:
      SET_6_OBJECTS (out);
      break;
    case 7:
      SET_7_OBJECTS (out);
      break;
    case 8:
      SET_8_OBJECTS (out);
      break;
    case 9:
      SET_9_OBJECTS (out);
      break;
    case 10:
      SET_10_OBJECTS (out);
      break;
    case 11:
      SET_11_OBJECTS (out);
      break;
    case 12:
      SET_12_OBJECTS (out);
      break;
    case 13:
      SET_9_OBJECTS (out);
      SET_4_OBJECTS (out);
      break;
    case 14:
      SET_12_OBJECTS (out);
      SET_2_OBJECTS (out);
      break;
    case 15:
      SET_11_OBJECTS (out);
      SET_4_OBJECTS (out);
      break;
    case 16:
      SET_16_OBJECTS (out);
      break;
    case 17:
      SET_11_OBJECTS (out);
      SET_6_OBJECTS (out);
      break;
    case 18:
      SET_9_OBJECTS (out);
      SET_9_OBJECTS (out);
      break;
    case 19:
      SET_16_OBJECTS (out);
      SET_3_OBJECTS (out);
      break;
    case 20:
      SET_16_OBJECTS (out);
      SET_4_OBJECTS (out);
      break;
    case 21:
      SET_16_OBJECTS (out);
      SET_5_OBJECTS (out);
      break;
    case 22:
      SET_16_OBJECTS (out);
      SET_6_OBJECTS (out);
      break;
    case 23:
      SET_16_OBJECTS (out);
      SET_7_OBJECTS (out);
      break;
    case 24:
      SET_16_OBJECTS (out);
      SET_8_OBJECTS (out);
      break;
    case 25:
      SET_16_OBJECTS (out);
      SET_9_OBJECTS (out);
      break;
    case 26:
      SET_16_OBJECTS (out);
      SET_10_OBJECTS (out);
      break;
    case 27:
      SET_16_OBJECTS (out);
      SET_11_OBJECTS (out);
      break;
    case 28:
      SET_16_OBJECTS (out);
      SET_8_OBJECTS (out);
      SET_4_OBJECTS (out);
      break;
    case 29:
      SET_16_OBJECTS (out);
      SET_9_OBJECTS (out);
      SET_4_OBJECTS (out);
      break;
    case 30:
      SET_16_OBJECTS (out);
      SET_12_OBJECTS (out);
      SET_2_OBJECTS (out);
      break;
    case 31:
      SET_16_OBJECTS (out);
      SET_11_OBJECTS (out);
      SET_4_OBJECTS (out);
      break;
    }

  /* This loop governs the asmptoptic behaviour of this algorithm, for long
     word copies.  */
  count = value >> 5;
  for (loop_var = 0; loop_var < count; loop_var++)
    SET_32_OBJECTS (out);
}


/* Exposed interface.  */

void *
__inhibit_loop_to_libcall
memset (void *s, int c, size_t n)
{
  void *result = s;

  /* None of the following handles setting zero bytes.  */
  if (n != 0)
    {
      unsigned test = (unsigned) s | (unsigned) n;

      if (test & 1)
	__byte_memset (s, c, n);
      else if (test & 2)
	{
	  short int sc = (short int) ((c << 8) + (char) c);
	  __short_int_memset (s, sc, n >> 1);
	}
      else
	{
	  int ic = (c << 24) + ((char) c << 16) + ((char) c << 8) + (char) c;
	  __int_memset (s, ic, n >> 2);
	}
    }

  return result;
}