* path.cc (iscygdrive): Disallow /cygdrive\x.
(normalize_posix_path): "Normalize" a windows path, if detected, rather than
converting to posix.
* fhandler_serial.cc (fhandler_serial::tcsetattr): Add support and capability
checking for B230400 bitrate.
(fhandler_serial::tcgetattr): Add support for B230400 bitrate.
* include/sys/termios.h: Add B230400 definition for Posix support of 230.4Kbps.
timeslice' wait.
(setup_handler): Revamp YA to attempt to deliver signal multiple times on
failure rather than punting to wait_sig.
* miscfuncs.cc (low_priority_sleep): Accept INFINITE sleep to mean "don't reset
the priority after setting it to idle". Return previous priority.
* winsup.h (SLEEP_0_STAY_LOW): Define.
(low_priority_sleep): Return an int.
* sigproc.h: Define WAIT_SIG_PRIORITY here.
* sigproc.cc: Remove WAIT_SIG_PRIORITY definition.
Initialize thread_sync event here which is used to Suspend using an event
rather than relying on SuspendThread/ResumeThread.
(cygthread::init): Save handle to runner thread for future termination.
(cygthread::cygthread): Only resume thread when it is actually suspended.
Otherwise signal thread completion event.
(cygthread::terminate): Forcibly terminate runner thread and any helper
threads. Call DisableThreadLibrary calls if execing.
* cygthread.h (cygthread::thread_sync): Declare.
* dcrt0.cc (do_exit): Eliminate calls to obsolete window_terminate and
shared_terminate.
* exceptions.cc (events_terminate): Don't bother closing title_mutex since it
is going away anyway.
* pinfo.cc (_pinfo::exit): Call cygthread::terminate to ensure that threads are
shut down before process exit or otherwise strange races seem to occur.
* shared.cc (shared_terminate): Eliminate.
* shared.h (shared_terminate): Eliminate declaration.
* winsup.h (window_terminate): Eliminate declaration.
* spawn.cc (spawn_guts): Call cygthread::terminate early in process if execing.
Call DisableThreadLibrary calls if execing.
* window.cc (Winmain): Call ExitThread to force exit.
(window_terminate): Eliminate.
* dcrt0.cc (do_exit): Track exit state more closely.
iov_len.
(check_iovec_for_write): Ditto.
* fhandler.h (fhandler_base::readv): New method.
(fhandler_base::writev): Ditto.
* fhandler.cc (fhandler_base::readv): New method.
(fhandler_base::writev): Ditto.
* syscalls.cc (_read): Delegate to readv(2).
(_write): Ditto, mutatis mutandi.
(readv): Rewrite, based on the old _read code, to use the new
fhandler_base::readv method. Improve access mode handling and ensure all calls
reach the final strace statement.
(writev): Ditto, mutatis mutandi.
* include/sys/uio.h (struct iovec): Change field types to match SUSv3.
* winsup.h (check_iovec_for_read): New function.
(check_iovec_for_write): Ditto.
* miscfuncs.cc (check_iovec_for_read): Ditto.
(check_iovec_for_write): Ditto.
st_atim, st_mtim, and st_ctim fields.
* fhandler_disk_file.cc (fhandler_disk_file::fstat_helper): Ditto.
* fhandler_process.cc (fhandler_process::fstat): Ditto.
* glob.c (stat32_to_STAT): Copy across the whole st_atim,
st_mtime, and st_ctim fields.
* syscalls.cc (stat64_to_stat32): Ditto.
* times.cc (to_timestruc_t): New function.
(time_as_timestruc_t): New function.
* winsup.h: Add to_timestruc_t and time_as_timestruc_t functions.
* include/cygwin/stat.h: Replace time_t with timestruc_t
throughout for all file times, removing the st_spare1, st_spare2,
and st_spare3 fields in the process. Add macros to access tv_sec
fields by old names.
* include/cygwin/types.h: Typedef timespec_t and timestruc_t as
struct timespec.
(path_conv): Add normalized_path field.
* path.cc (path_conv::~path_conv): New destructor.
(path_conv::check): Set normalized_path, where appropriate.
* dtable.cc (build_fhandler_from_name): Use normalized path from path_conv.
* syscalls.cc (chroot): Ditto.
* cygheap.h: Remove path_prefix_p declaration. Christopher Faylor
<cgf@redhat.com> (minor fixups)
* Makefile.in: Add fhandler_proc.o, fhandler_registry.o, fhandler_process.o and
fhandler_virtual.o.
* dtable.cc (dtable::build_fhandler): Add entries for FH_PROC, FH_REGISTRY and
FH_PROCESS. Set unix_name to the normalized posix path.
* fhandler.h: Add constants for FH_PROC, FH_REGISTRY and FH_PROCESS. Add class
declarations for fhandler_virtual, fhandler_proc, fhandler_registry and
fhandler_virtual. Update fhandler_union accordingly.
* fhandler_proc.cc: New file. Add implementation for fhandler_proc.
* fhandler_virtual.cc: New file. Add implementation for fhandler_virtual.
* fhandler_process.cc: New file. Add implementation for fhandler_process.
* fhandler_registry.cc: New file. Add implementation for fhandler_registry.
* path.cc: Add isproc and isvirtual_dev macros.
* path.cc (path_conv::check): Add check for virtual devices.
* path.cc (mount_info::conv_to_win32_path): Convert paths in /proc to empty
Win32 paths.
* path.cc (chdir): Replace check for FH_CYGDRIVE with more generic
isvirtual_dev macro. Force setting of posix path for virtual fhandlers.
* path.h: Add externally visible path_prefix_p and normalized_posix_path
prototypes.
* Merged cygwin_daemon into head minus the new shm and ipc exports.
2002-02-28 Robert Collins <rbtcollins@hotmail.com>
* fhandler_tty.cc (fhandler_tty_slave::open): More debugging.
(fhandler_tty_slave::read): Fix printf type for the handle.
* tty.cc (tty::common_init): Add a FIXME for security.
2002-01-29 Robert Collins <rbtcollins@hotmail.com>
* Makefile.in (OBJS): Remove duplicate localtime.o.
2002-01-17 Robert Collins <rbtcollins@hotmail.com>
* cygserver.cc (check_and_dup_handle): Consolidate the two variants for
simplicity.
Add Some basic debug output.
(client_request_attach_tty::serve): Use the new debug_printf for clarity.
Mark the duplicated handles as inheritable - fixup_after_fork() doesn't reopen
tty's.
2002-01-16 Robert Collins <rbtcollins@hotmail.com>
* cygserver.cc (transport): Correct scope.
(client_request_attach_tty::serve): Add more debug information.
Fix erroneous use of transport instead of conn.
* cygserver_transport_pipes.cc (transport_layer_pipes::close): More debug.
(transport_layer_pipes::read): Ditto.
(transport_layer_pipes::write): Ditto.
(transport_layer_pipes::impersonate_client): Ditto.
Mon Oct 8 7:41:00 2001 Robert Collins <rbtcollins@hotmail.com>
* cygserver.cc (server_request::process): Rename client_request_shm_get to
client_request_shm.
* cygserver_process.cc (process_cache::add): Rename to add_task.
Use process_cleanup instead of process_request.
(process_cache::remove_process): New method.
(process::process): Initialize new members.
(process::~process): New member.
(process::cleanup): New method.
(process::add_cleanup_routine): New method.
(process_request::process): Rename to process_cleanup.
Call the process object's cleanup method and then delete it.
(process_process_param::request_loop): Remove the signalling process.
* cygserver_shm.cc: Globally rename client_request_shm_get to client_request_shm.
(client_request_shm_get::serve): Handle attach request counting.
* cygserver_shm.h: Globally rename client_request_shm_get to client_request_shm.
(class shm_cleanup): New class.
* shm.cc: Globally rename client_request_shm_get to client_request_shm.
(client_request_shm::client_request_shm): New constructor for attach requests.
(shmat): Use it.
* include/cygwin/cygserver_process.h (class process_request): Rename to
process_cleanup.
(class cleanup_routine): New class.
(class process): New members and methods to allow calling back when the process
terminates.
Thu Oct 4 14:12:00 2001 Robert Collins <rbtcollins@hotmail.com>
* cygserver.cc (request_loop): Make static.
(main): Use new cache constructor syntax.
Start cache worker threads.
Cleanup the cache at shutdown.
* cygserver_process.cc: Run indent.
(process_cache::process_cache): Add a trigger to use when adding a process.
(process_cache::process): Move process_entry to process.
Insert at the end of the list.
Trigger the request loop when new process's inserted.
(process_cache::process_requests): Do it.
(process_cache::add): New method.
(process_cache::handle_snapshot): New method.
(process::process): Merge in the process_entry fields.
(process::handle): Make a stub function.
(process::exit_code): New method.
(process_request::process): New method.
(process_process_param::request_loop): New method.
* cygserver_shm.cc: New header dependency - threaded_queue.h.
* threaded_queue.cc (threaded_queue::cleanup): Clearer messages.
(queue_process_param::stop): Short spinlock on interruptible threads.
* threaded_queue.h (class threaded_queue): New constructor.
* include/cygwin/cygserver_process.h (process_request): New class.
(process_entry): Remove.
(process): Merge in process_entry.
(process_cache): Inherit from threaded_queue.
Tue Oct 2 23:24:00 2001 Robert Collins <rbtcollins@hotmail.com>
* cygserver.cc (class server_process_param): Use new constructor syntax.
* cygserver_process.cc (process_cache::~process_cache): New function.
* threaded_queue.cc: Define condition debug_printf.
Run indent.
(threaded_queue::cleanup): Move queue_process_param guts to a method.
(threaded_queue::process_requests): Ditto.
(queue_process_param::queue_process_param): New method.
(queue_process_param::~queue_process_param): Ditto.
(queue_process_param::start): Ditto.
(queue_process_param::stop): Ditto.
* threaded_queue.h (class queue_process_param): Add support for
interruptible request loops.
* cygwin/include/cygwin/cygserver_process.h (class process_cache): Add
destructor.
Tue Oct 2 23:24:00 2001 Robert Collins <rbtcollins@hotmail.com>
* cygserver_client.cc: New flag allow_daemon to disable the daemon completely.
(cygserver_request): Check it.
(cygserver_init): Ditto.
* environ.cc (parse_thing): Add (no)daemon option.
Tue Oct 2 23:00:00 2001 Robert Collins <rbtcollins@hotmail.com>
* shm.cc: Update to handle include changes from HEAD.
Tue Oct 2 16:06:00 2001 Robert Collins <rbtcollins@hotmail.com>
* Makefile.in: Remove cygserver_shm.o from cygwin1.dll.
Rename cygserver_shm_outside.o to cygserver_shm.o.
* cygserver.cc (server_request::process): Use the new client_request
constructor.
* cygserver_client.cc: Remove the #ifdef's stubs for the server method
within cygwin.
(client_request_attach_tty::client_request_attach_tty): Use the new
client_request constructor.
(client_request_shutdown::client_request_shutdown): Ditto.
(client_request::client_request): Ditto.
* cygserver_shm.cc (client_request_shm_get::serve): Remove the
#ifdef'd stub for in-cygwin builds.
(client_request_shm_get::client_request_shm_get): Use the new
client_request constructor, and remove the in-cygwin variants.
* cygserver_shm.h (class client_request_shm_get): #ifndef test the
serve method - it's only used in cygserver.
* shm.cc (client_request_shm_get::client_request_shm_get): New function.
* include/cygwin/cygserver.h (request_header): New constructor.
(class client_request): Use it.
New constructor accepting the header size.
#ifndef test the server method - it's only used within cygserver.
(client_request_get_version): #ifdef test the server method.
(client_request_shutdown): Ditto.
(client_request_attach_tty): Ditto.
Tue Oct 2 9:57:00 2001 Robert Collins <rbtcollins@hotmail.com>
* Makefile.in: add threaded_queue.o to cygserver.exe.
* cygserver.cc: Include threaded_queue.h
(class server_request): Inherit from queue_request.
(class server_process_param): Inherit from queue_process_param.
(class server_request_queue): Inherit from threaded_queue.
(request_loop): Adjust for new types.
(server_request_queue::process_requests): Remove guts to
threaded_queue::process_requests.
(server_request::server_request): Adjust for new types.
(worker_function): Delete.
(server_request_queue::create_workers): Delete.
(server_request_queue::cleanup): Delete.
(server_request_queue::add): Move guts to threaded_queue::add.
* threaded_queue.cc: New file.
* threaded_queue.h: New file.
Mon Oct 1 12:38:00 2001 Robert Collins <rbtcollins@hotmail.com>
* cygserver.cc (client_request::serve): New function.
* cygserver_process.cc: Inlude <pthread.h> for pthread_once.
(process_cache::process_cache): Initialise a crtiical section for write access.
(process_cache::process): Use the critical section. Also add missing entries to
the cache.
(do_process_init): New function to initalise class process static variables.
(process::process): Ensure that the process access critical section is
initialised.
(process::handle): Close the handle of old process's when they have terminated
and we are returning the handle for a process with the same pid.
* cygserver_shm.cc: Run indent.
Include cygserver_process.h to allow process cache functionality.
(client_request_shm_get::serve): New parameter for process cache support.
Use the process cache, not OpenProcess to get a handle to the originating process.
Fix a handle leak with token_handle.
* cygserver_shm.h (class client_request_shm_get): Update ::serve for process
cache support.
* cygserver_transport_pipes.cc: Redefine debug_printf to be conditional on DEBUG.
* include/cygwin/cygserver.h: Do not implement client_request::serve in the
header.
* include/cygwin/cygserver_process.h (class process_cache): Add a write access
critical section to prevent races when requests from a multithreaded
application arrive.
Sun Sep 30 23:41:00 2001 Robert Collins <rbtcollins@hotmail.com>
* Makefile.in: Add cygserver_process.o to cygserver.exe.
* cygserver.cc: Include signal.h and cygwin_version.h.
Define debug_printf as a macro.
Define DEBUG to a value.
(client_request_attach_tty::serve): Add beginning of process cache support.
Change from #ifdef DEBUG to work with new DEBUG style.
(client_request_get_version::serve): Add beginning of process cache support.
(class server_request): New prototype for support of process cache.
(class queue_process_param): New class to allow request loop threading.
(class server_request_queue): Add beginning of process cache support.
Allow request loop threading.
(request_loop): Thread function for request loops.
(server_request_queue::process_requests): Initiator for threaded request loops.
(client_request_shutdown::serve): Add beginning of process cache support.
(server_request::server_request): Ditto.
(server_request::process): Use debug_printf. Add beginning of process cache
support.
(server_request_queue::cleanup): Kill off any request loop threads.
(server_request_queue::add): Add beginning of process cache support.
(handle_signal): Trigger a shutdown.
(main): Print out some useful info at startup - version, date time.
Add process cache support.
Spawn a separate thread for the transport request loop, thus allowing concurrent
support for multiple transports.
* cygserver_client.cc (client_request_get_version::serve): Add process cache
support.
(client_request_attach_tty::serve): Add process cache support.
(client_request_shutdown::serve): Add process cache support.
* cygsserver_process.cc: New file with the process cache support.
* cygserver_shm.cc: Redefine debug_printf to allow conditional output.
* cygwin.din: Export shmdt().
* shm.cc: Run indent.
Update FIXME's.
(shmdt): New function.
* include/cygwin/cygserver.h (class client_request): Add process cache support.
(class client_request_get_version): Ditto.
(class client_request_shutdown): Ditto.
(class client_request_attach_tty): Ditto.
* include/cygwin/cygserver_process.h: New header for process cache support.
Sun Sep 30 8:52:00 2001 Robert Collins <rbtcollins@hotmail.com>
* include/cygwin/cygserver_transport.h: Add copyright header.
* include/cygwin/cygserver_transport_pipes.h: Ditto.
* include/cygwin/cygserver_transport_sockets.h: Ditto.
Sat Sep 29 20:40:00 2001 Robert Collins <rbtcollins@hotmail.com>
* Makefile.in: Add cygserver_transport_sockets.o to DLL_OFILES.
Add cygserver_transport_sockets_outside.o to cygserver.exe.
* cygserver.cc: Include new include files.
* cygserver_client.cc: Ditto.
* cygserver_shm.h: No need to include <sys/socket.h> now.
* cygerver_transport.cc: Include new include files.
(transport_layer_base::transport_layer_base): Strip back to a stub.
(transport_layer_base::listen): Ditto.
(transport_layer_base::accept): Ditto.
(transport_layer_base::close): Ditto.
(transport_layer_base::read): Ditto.
(transport_layer_base::write): Ditto.
(transport_layer_base::connect): Ditto.
* cygserver_transport_pipes.cc: Include new header
"cygwin/cygserver_transport_pipes.h".
* cygserver_transport_sockets.cc: New file.
* dcrt0.cc: No need to include <sys/socket.h> now.
* fhandler_tty.cc: Ditto.
* tty.cc: Ditto.
* include/cygwin/cygserver_transport.h: Strip the base class to a stub.
Remove the cygserver_transport_pipes class.
* include/cygwin/cygserver_transport_pipes.h: New file.
* include/cygwin/cygserver_transport_sockets.h: New file.
Tue Sep 25 16:22:00 2001 Robert Collins <rbtcollins@hotmail.com>
* autoload.cc: Add dynamic load statement for 'ImpersonateNamedPipeClient'.
* Makefile.in: Add new object files, and build instructions for cygserver.exe.
* cygwin.din: Export ftok, shmat, shmctl and shmget.
* dcrt0.cc: Additional includes for cygserver support.
(dll_crt0_1): Initialise the cygserver client.
* fhandler.h (fhandler_tty): New method cygserver_attach_tty.
* fhandler_tty.cc: Additional includes for cygserver support.
(fhandler_tty_slave::open): Attempt to use the cygserver when obtaining
handles from the parent process. On failure or 9x use the current method.
(fhandler_tty_slave::cygserver_attach_tty): New function.
* fork.cc (fork_child): Fixup shm memory mapped areas.
* pinfo.h: Declare fixup_shms_after_fork().
* security.h: Declare alloc_sd().
* tty.cc: Additonal includes to support cygserver.
(tty::common_init): Don't allow others to open us if the cygserver is running.
* winsup.h: Declare cygserver_running.
* cygserver.cc: New file.
* cygserver_client.cc: New file.
* cygserver_shm.cc: New file.
* cygserver_shm.h: New file.
* cygserver_transport.cc: New file.
* cygserver_transport_pipes.cc: New file.
* ipc.cc: New file.
* shm.cc: New file.
* include/cygwin/cygserver.h: New file.
* include/cygwin/cygserver_transport.h: New file.
* include/sys/ipc.h: New file.
* include/sys/shm.h: New file.
2002-02-28 Robert Collins <rbtcollins@hotmail.com>
* thread.cc (semaphore::TryWait): Set errno as required by posix 1003.1.
(__sem_wait): Ditto.
(__sem_trywait): Ditto.
* strace.cc (strace::microseconds): Use hires class for calculating times.
* sync.h (new_muto): Use NO_COPY explicitly in declaration.
* times.cc (gettimeofday): Reflect change in usecs argument.
(hires::usecs): Ditto. Changed name from utime.
* winsup.h (NO_COPY): Add nocommon attribute to force setting aside space for
variable.
* regcomp.c (REQUIRE): Add a void cast to bypass a warning.
(ctrl_c_handler): Attempt to work around potential signal duplication during
process startup.
(sig_handle): Ignore SIGINT when we're just an "exec stub".
* spawn.cc (spawn_guts): Store pid of spawned process in global for use by
ctrl_c_handler.
* dcrt0.cc (dll_crt0_1): Call renamed initialization function.
* winsup.h: Reflect function name change.
Force dependencies for files which depend on autogenerated headers to ensure
that they are always built.
* child_info.h (child_info): Add new fields to accommodate new magic number
header stuff.
* dcrt0.cc: Rely on "child_info_magic.h" to ensure that correct child_info
magic numbers are used.
(dll_crt0_1): Temporarily remove _cygwin_testing_magic test.
(_dll_crt0): Do more testing on magic numbers from fork_info structure. Call
"multiple_cygwin_problem" where appropriate.
(multiple_cygwin_problem): Rename from multiple_cygwin_die. Issue a warning or
die, as appropriate based on cygwin version/magic number mismatch.
* pinfo.cc (pinfo::exit): Don't attempt to dereference `this' if it doesn't
exist. This can happen when a fatal error occurs early in process
initialization.
* shared.cc: Rely on "shared_info_magic.h" to accommodate that new magic number
header stuff.
(shared_info::initialize): Use new magic number stuff, for shared region.
(memory_init): Ditto, for mount table.
* shared_info.h: Accomodate new magic number stuff for shared region and mount
table.
* sigproc.cc: Rely on "child_info_magic.h" to accommodate new magic number
header stuff.
(init_child_info): Initialize new fields in child_info) to accomodate magic
numbers.
* winsup.h: Rename multiple_cygwin_die to multiple_cygwin_problem.
* include/cygwin/version.h: Define macros for manipulating version magic.
* cygmagic: New shell script for generating magic numbers.
* exceptions.cc (try_to_debug): Spin only as long as we don't have a debugger
attached.
* fhandler.h (fhandler_base::set_nohandle): New method.
(fhandler_base::get_nohandle): New method.
* fhandler.cc (fhandler_base::dup): Avoid duplicating handle if there is no
handle.
* fhandler_disk_file.cc (fhandler_disk_file::opendir): Set nohandle flag on
dummy fd.
* Makefile.in: Make intermediate library for eventual inclusion in libcygwin.a
* fhandler.h (fhandler_pipe::fhandler_pipe): Remove default argument setting
since it is no longer used.
* miscfuncs.cc (check_null_str): New function.
(+check_null_str_errno): Ditto.
* net.cc: Add defensive buffer checking throughout.
(cygwin_sendto): Protect against invalid fd.
(cygwin_recvfrom): Ditto.
(cygwin_getpeername): Ditto.
(cygwin_recv): Ditto.
(cygwin_send): Ditto.
* winsup.h: Declare a new function.
* select.cc (set_bits): Fix conditional for setting fd in exceptfds.
* dtable.cc (dtable::build_fhandler): Create fhandler_pipe using correct device
type.
* path.cc (get_devn): Set correct pipe device type from device name.
* syscalls.c (_write): Validate that write buffer is accessible for reading,
not writing.
* winsup.h: Declare new function, increase regparmization of check_* functions.
winsock.
* fhandler.cc (fhandler_base::set_inheritance): Make debugging output more
verbose.
* fhandler_socket.cc (fhandler_socket::fixup_after_fork): Force loading of
winsock32 if winsock2 not available.
* net.cc (set_socket_inheritance): Use DuplicateHandle in all cases to set
inheritance correctly.
(fdsock): Use winsock2_active macro to determine when to set socket
inheritance. Remove fdtab resource locking since this function should already
be protected.
(cygwin_accept): Simplify logic. Ensure that fdtab unlock is not called
inappropriately.
(cygwin_rcmd): Use fdtab locking.
(cygwin_rresvport): Ditto.
(cygwin_rexec): Ditto.
* select.cc (peek_socket): Set errno appropriately if winsock select fails.
* winsup.h: Declare check_pty_fds.
* syscalls.cc (check_pty_fds): Rename from check_ttys_fds. Also check pty
master.
(setsid): Use check_pty_fds.
* dtable.cc (dtable::dec_console_fds): Add check on pty fds.
SNDCTL_DSP_GETBLKSIZE operation. Remove obsolete 'name' arg from fhandler_*
constructors throughout.
* winsup.h (winsock_active): New macro.
(winsock2_active): Ditto.
* autoload.cc (wsock_init): Use new macros to decide if winsock or winsock2 is
loaded.
(nonexist_wsock32): Dummy function to force winsock load.
(nonexist_ws2_32): Dummy function to force winsock2 load.
* fhandler.h (fhandler_socket::fstat): Declare new method. Currently unused.
* fhandler_socket.cc (fhandler_socket::fixup_before_fork_exec): Check that
winsock2 is active before trying WSADuplicateSocketA.
(fhandler_socket::fixup_after_fork): Add extra check for winsock2_active.
Otherwise use iffy procedures for Windows 95.
(fhandler_socket::fixup_after_exec): Add debugging.
(fhandler_socket::dup): Add debugging.
(fhandler_socket::fstat): New method.
(fhandler_socket::set_close_on_exec): Attempt to perform iffy stuff on Windows
95.
* errno.cc (_sys_nerr): Work around compiler strangeness.
* pinfo.cc (winpids::add): Add extra element at end of allocated array for
setting to NULL.
(winpids::enumNT): Ditto.
(winpids::init): Don't modify pidlist if it hasn't been allocated
(possibly due to malloc problem).
* child_info.h: Rename PROC_* to _PROC_*. Define PROC_* with additional
testing magic. Eliminate old PROC_FORK and rename PROC_FORK1 to PROC_FORK.
* dcrt0.cc (_cygwin_testing_magic): New variable. Added to magic number in
proc_info.
(alloc_stack): Eliminate old PROC_FORK test.
(dll_crt0_1): Ditto. Use _PROC_* enums for test. Subtract
_cygwin_testing_magic from child_proc_info->type so that normal cygwin programs
invoked by test suite programs do not consider themselves to be in a cygwin
environment.
(_dll_crt0): Ditto. Move environment checks to initial_env function to
conserve on stack space.
(initial_env): New function. Checks for testing and debugging environment
variables.
* init.cc (cygwin_hmodule): Move declaration.
* winsup.h: Declare variables used for cygwin testing.
passing information back to caller.
* winsup.h: Declare stat_worker.
* dir.cc (opendir): Use stat_worker rather than stat and pass path_conv
parameter to stat_worker for later inspection.
* syslog.cc (syslog): Teach syslog about syslog priorities other than LOG_ERR,
LOG_WARNING and LOG_INFO
* path.cc (path_conv::check): Don't perform file system or rootdir checks on
devices.
a change in /etc.
* cygheap.h (struct init_cygheap): Add member `etc_changed_h'
and method `etc_changed'.
* grp.cc (enum grp_state): Eliminate.
(class grp_check): Ditto.
(group_state): Define as `class pwdgrp_check'.
(parse_grp): Remeber path and modification time of /etc/group file.
* passwd.cc (enum_pwd_state): Eliminate.
(class pwd_check): Ditto.
(passwd_state): Define as `class pwdgrp_check'.
(read_etc_passwd): Remember path and modification time of /etc/passwd
file.
* pwdgrp.h: New file.
(enum pwdgrp_state): Substitutes `pwd_state' and `grp_state'.
(class pwdgrp_check): Substitutes `pwd_check' and `grp_check'.
* Makefile.in: Use linker script to control location of cygheap.
* cygheap.cc (buckets): Make static.
(init_cheap): Remove special iswinnt handling. Allocate cygheap at a fixed
location. Display more info when allocation fails.
(cygheap_fixup_in_child): Try harder to move cygheap to correct location.
Display more info when allocation fails.
* fhandler.h (fhandler_socket): Add macros for tracking socket shutdown state.
* net.cc (cygwin_shutdown): Set appropriate shutdown value for future use.
* select.cc (select_stuff::cleanup): New method.
(cygwin_select): Call cleanup explicitly to avoid a race.
(select_stuff:~select_stuff): Call cleanup chain via cleanup method.
(fhandler_socket::select_read): Set *_ready when shutdown has been called on
the socket.
(fhandler_socket::select_write): Ditto.
(fhandler_socket::select_except): Ditto.
* winsup.h: Move NO_COPY to "COMMON" section.
* autoload.cc (wsock_started): Avoid initializing NO_COPY value.
* sigproc.cc: Remove initialization from NO_COPY variables.
(sigproc_init): Initialize sig_loop_wait here, rather than via initialization.
(subproc_init): Initialize proc_loop_wait here, rather than via initialization.
* fhandler.h: Move definitions of O_NOSYMLINK, O_DIROPEN and
OLD_O_NDELAY from winsup.h to here. Add O_NONBLOCK_MASK define.
* fhandler_socket.cc (fhandler_socket::close): Add hack to allow
a graceful shutdown even if shutdown() hasn't been called by the
application. Add debug output.
(fhandler_socket::ioctl): Set fhandler's NONBLOCK flag according
to FIONBIO setting.
(fhandler_socket::fcntl): Use new O_NONBLOCK_MASK define. Actually
set `request' before using it.
* fhandler_tty.cc: Use new O_NONBLOCK_MASK define throughout.
(fhandler_tty_slave::ioctl): Set fhandler's NONBLOCK flag according
to FIONBIO setting.
(fhandler_pty_master::ioctl): Ditto.
* net.cc (wsock_event::prepare): Compare WSACreateEvent return code
with `WSA_INVALID_EVENT' according to MSDN.
* syscalls.cc (_read): Use new O_NONBLOCK_MASK define.
* fhandler.cc (fhandler_base::fcntl): Only set specific O_NDELAY style flag
passed in from application.
* fhandler_socket.cc (fhandler_socket::fcntl): Ditto.
* fhandler.h: Set constant for future use.
* winsup.h: Define OLD_O_NDELAY only for old programs.
* include/cygwin/version.h: Define CYGWIN_VERSION_CHECK_FOR_OLD_O_NONBLOCK.
* dcrt0.cc (set_os_type): Set 'iswinnt' appropriately.
* cygheap.cc (init_cheap): Revert to using VirtualAlloc for allocating cygheap.
(cygheap_setup_for_child_cleanup): New function. Standard function to call
after calling CreateProcess to cleanup cygheap info passed to child.
(cygheap_fixup_in_child): Copy cygheap from shared memory into allocated space
under Windows 9x or if can't relocate shared space under NT.
* cygheap.h: Declare new function.
* spawn.cc (spawn_guts): Use cygheap_fixup_in_child.
* fork.cc (fork_parent): Ditto.
* winsup.h: Declare iswinnt.
* path.cc (path_conv::check): Add signal protection here since retrieving info
about remote shares can take some time.
* path.h (check_null_empty_str_errno): Convert to a function prototype.
* path.cc (check_null_empty_str): Move to miscfuncs.cc.
* miscfuncs.cc (check_null_empty_str_errno): New function.
(__check_null_invalid_struct): Ditto.
(__check_null_invalid_struct_errno): Ditto.
(check_null_empty_str): Change from VirtualQuery to IsBadWritePtr.
* thread.cc (check_valid_pointer): Ditto.
* resource.cc (getrlimit): Use check_null_invalid_struct macro for checking
validity of pointer.
(setrlimit): Ditto.
of file APIs mode (OEM/ANSI) here.
(codepage_init): From here.
* winsup.h (set_file_api_mode): Declare it.
* fork.cc (fork_child): Set file APIs mode in forkee.
* pinfo.h: Correctly set __SIGOFFSET.
* path.cc (hash_path_name): Avoid calling library functions for simple copying
of characters.
* shortcut.c: Use WIN32_LEAN_AND_MEAN.
* smallprint.c: Ditto.
* environ.cc (getwinenv): Minor clarity fix.
* localtime.c: No need to include windows.h
* string.h: New file.
(read_etc_group): Substitute MAX_DOMAIN_NAME by
INTERNET_MAX_HOST_NAME_LENGTH.
* passwd.cc (parse_pwd): Don't force pw_name to be lower case.
* sec_helper.cc: Substitute MAX_USER_NAME by UNLEN,
MAX_COMPUTERNAME_LENGTH by INTERNET_MAX_HOST_NAME_LENGTH throughout.
(lookup_name): Slight cleanup.
* security.cc (alloc_sd): Substitute MAX_USER_NAME by UNLEN.
* security.h: Define DEFAULT_UID as DOMAIN_USER_RID_ADMIN and
DEFAULT_GID as DOMAIN_ALIAS_RID_ADMINS.
* shared.cc (memory_init): Substitute MAX_USER_NAME by UNLEN.
* thread.h: Ditto.
* uinfo.cc (internal_getlogin): Substitute MAX_USER_NAME by UNLEN.
Substitute MAX_COMPUTERNAME_LENGTH and MAX_HOST_NAME by
INTERNET_MAX_HOST_NAME_LENGTH.
* winsup.h: Include lmcons.h. Eliminate MAX_USER_NAME and
MAX_HOST_NAME. Move DEFAULT_UID and DEFAULT_GID to security.h.
(init_exceptions): Just use init_exception_handler.
(open_stackdumpfile): New function.
(stack_info::first_time): Eliminate.
(stack_info::init): Set up fields to avoid "first_time" consideration.
(stack_info::walk): Remove "first_time" consideration.
(stackdump): Change arguments to accept initial frame pointer and open stack
file flag.
(stack): Eliminate.
(cygwin_stackdump): Use stackdump() rather than stack().
(try_to_debug): Remove all synchronization logic. Just keep looping in
exception handler until debugger notices us. Return 1 if successfully started
debugger.
(handle_exceptions): Just return if we know that we're debugging. Reorganize
to avoid creating a stackdump file if we are starting a debugger. Return from
exception handler if debugger started successfully.
(sig_handle): Create a stackdump only if debugger wasn't started.
* winsup.h (try_to_debug): Add an argument.
* cygheap.cc: Include security.h.
* grp.cc (internal_getgrent): New function.
(getgroups): Rearranged using `internal_getgrent' and the new
`cygsid' class.
* passwd.cc (internal_getpwent): New function.
* sec_acl.cc: Use new `cygsid' class throughout.
(acl_access): Use `internal_getgrent' instead of `getgrent'.
* sec_helper.cc: Use new `cygsid' class throughout.
(get_id_from_sid): Use `internal_getgrent' instead of `getgrent'.
Use `internal_getpwent' instead of `getpwent'.
* security.cc: Use new `cygsid' class throughout.
* security.h: Move `MAX_SID_LEN' from winsup.h to here.
Add extern declarations for `internal_getgrent' and `internal_getpwent'.
(class cygsid): New class.
* shared.cc (sec_user): Use new `cygsid' class.
* syscalls.cc (seteuid): Try to set owner to user and primary group to
current group in impersonation token before performing impersonation.
(setegid): Try to set primary group in process token to the new group
if ntsec is on.
* uinfo.cc (internal_getlogin): Use new `cygsid' class.
Try to set owner to user and primary group to current group in process
token if the process has been started from a non cygwin process.
(uinfo_init): Set primary group only if the process has been started
from a non cygwin process.
* winsup.h: Move define for `MAX_SID_LEN' to security.h.
chrisiasci@aol.com).
* cygwin.din: Add a new, internally used export - _check_for_executable.
* dcrt0.cc (dll_crt0_1): Set _check_for_executable for older binaries. Pass
user_data to premain functions.
* fhandler.cc (fhandler_disk_file::open): Only check for executable if the
linked program is intereested in the executable bit.
(fhandler_disk_file::check_execable_p): Delete.
* fhandler.h (executable_states): New enumeration of various states of
executable bit caring.
(fhandler_base::set_execable_p): New method.
* fhandler_termios.cc (fhandler_termios::line_edit): Flag when a signal has
been sent to the tty. Return -1 when this is so.
* fhandler_console.cc (fhandler_console::read): Return -1 when signal sending
character encountered.
* path.cc (path_conv::check): Record when path refers to a disk device. Move
executable extension check here.
(check_sysfile): Accomodate new EXEC path states.
(has_suffix): Remove.
(next_suffix): Remove.
(class suffix_scan): New clas.
(suffix_scan::has): New method.
(suffix_scan:next): New method.
(symlink_info::check): Use suffix_scan method to control for scanning for
suffixes.
* path.h (path_conv::exec_state): New method.
* perprocess.h: Make "C" friendly.
* include/cygwin/version.h: Define CYGWIN_VERSION_CHECK_FOR_S_IEXEC. Bump
CYGWIN_VERSION_API_MINOR.
* include/sys/cygwin.h: Change premain declarations.
* winsup.h: Move __cplusplus test to after builtin defines.
* child_info.h (child_info): Move shared_h, console_h to cygheap. Add mount_h.
* cygheap.h (init_cygheap): Add shared_h, console_h.
* cygheap.cc (init_cheap): Initialize heap at a fixed location after the shared
memory regions. Initialize cygheap->user name here.
* dcrt0.cc (dll_crt0_1): Call getpagesize () to initialize constants. Remove
cygheap_init since it is done in shared_init now.
(_dll_crt0): Initialize mount_h, remove shared_h and console_h initialization.
* fhandler_console.cc (console_shared_h): Eliminate.
(get_tty_stuff): Use cygheap->console_h rather than console_shared_h.
* heap.cc (heap_init): Use page size constant calculated earlier in
initialization.
* shared.cc: Eliminate cygwin_shared_h. Add cygwin_mount_h.
(mount_table_init): New function for initializing a user mount table.
(open_shared_file_map): Use constant for shared memory region. Initialize
cygheap and mount table here.
(open_shared): Improve debugging output.
(shared_info::initialize): Eliminate call to mount.init.
(shared_terminate): Use cygheap->shared_h. Close cygwin_mount_h.
(open_shared_file_map): Eliminate.
* shared_info.h (mount_info): Add a version field.
(shared_align_past): New macro for calculating location for shared memory
regions.
* sigproc.cc (init_child_info): Eliminate shared_h, console_h.
* spawn.cc (spawn_guts): Pass on cygwin_mount_h iff not a different user.
* syscalls.cc (system_info): New global holding system memory defaults.
(getpagesize): Use system_info.
* uinfo.cc (internal_getlogin): Only fill in user name if nonexistent.
* winsup.h: Declare system_info.
* passwd.cc (read_etc_passwd): Use cygheap->user.name () rather than retrieving
the name again.
* environ.cc (codepage_init): To here.
* exceptoins.cc (SIG_NONMASKABLE): Remove SIGCONT from consideration since it
is supposed to be maskable.
* signal.cc (sigaction): Ditto.
* sigproc.cc (wait_sig): Ditto.
* winsup.h: Eliminate global declaration of codepage_init.
* dcrt0.cc (dll_crt0_1): Translate command line to OEM if current codepage is
OEM.
* environ.cc: Add new option 'codepage' to CYGWIN environment variable.
* fhandler_clipboard.cc (fhandler_clipboard::read): Read clipboard in OEM mode
if current codepage is OEM.
* fhandler_console.cc (fhandler_console::read): Only translate console input if
current codepage is ANSI.
* fhandler_console.cc (fhandler_console::write_normal): Translate output data
if current codepage is ANSI.
* pinfo.cc (codepage_init): New function. Setup current codepage from CYGWIN
environment variable and set codepage for file APIs.
* security.cc (read_sd): Translate file name to it if current codepage is OEM.
* winsup.h: (sys_wcstombs,sys_mbstowcs): Use current codepage for translations
between multibyte and widechar string and vice versa.
Always check for MAX_PATH overrun. Avoid adding one too many backslashes when
src path begins with a slash. From Corinna Vinschen.
* winsup.h: Force demangling for dll_crt0 for newer compilers.
active.
* syscalls.cc (_read): Don't clear errno.
* sigproc.cc (wait_sig): Don't scan the waiting process list after a SIGCHLD if
there are no zombies to reap.
* winsup.h: Use __builtin_strcmp.
* environ.cc (posify): Don't initialize len unless it is required
(from DJ Delorie <dj@redhat.com>).
* dcrt0.cc (dll_crt0_1): Call signal_fixup_after_exec where appropriate. Set
myself->uid from parent version. Just use ThreadItem Init method. Close or
store hexec_proc as appropriate.
(_dll_crt0): Store user_data->forkee here so that proper tests can be made
subsequently.
(do_exit): Remove hExeced stuff.
* environ.cc (environ_init): Accept environ count as well as environ pointer.
* environ.h: Reflect above change.
* pinfo.cc (pinfo_init): Ditto. Accept environ count.
(fixup_in_spawned_child): Remove.
* spawn.cc (spawn_guts): Move signal code to dll_crt0_1. Don't suspend execing
process since it is no longer necessary. Store envc.
* exceptions.cc (signal_fixup_after_exec): New function.
(call_handler): Remove hExeced test.
* child_info.h (cygheap_exec_info): Store envc as well as envp.
(child_info_spawn): Store hexec_proc so that it can be closed in child.
* path.cc (normalize_posix_path): Avoid intermediate use of temporary cwd buf.
(normalize_win32_path): Ditto.
(cwdstuff::get_initial): Always set lock.
* sigproc.h: Remove hExeced.
* strace.cc (strace::vsprntf): Modify to accomodate for lack of hExeced.
* thread.cc (MTinterface::Init): Merge Init1 and ClearReent into this method.
(MTinterface::Init1): Eliminate.
(MTinterface::ClearReent): Eliminate.
* thread.h: Reflect above changes.
* include/sys/strace.h (strace): Make microseconds() public. Make various
functions 'regparm', throughout.
* pinfo.h (_pinfo): Inline simple signal manipulation functions. Requires
inclusion of thread.h which was removed from .cc files, where appropriate.
throughout.
* pinfo.cc: Eliminate signal manipulation functions.
(_pinfo::exit): Calculate total rusage for exiting process here.
* cygheap.cc (size2bucket): Eliminate.
(init_buckets): Ditto.
(_cmalloc): Calculate size and bits in a loop rather than going through a
function call.
(_crealloc): Use stored array index to calculate allocated size.
* spawn.cc (spawn_guts): Use _pinfo exit method to exit, calculating cpu usage.
specific call when appropriate.
(__set_winsock_errno): Rename from set_winsock_errno. Accept function and line
as arguments.
* path.cc (path_conv::check): Continue the neverending battle to make cygwin
properly understand that path specs ending in a slash require that the path
refer to a directory. Windows does not do this by default.
(symlink_info::check): Remove ENOTDIR test. Move it to path_conv::check.
* path.h: Remove obsolete constant.
* winsup.h (set_winsock_errno): New macro.
throughout.
* shared.h: Remove.
* cygwin_version.h: New file.
* delqueue.h: New file.
* environ.h: New file.
* host_dependent.h: New file.
* perprocess.h: New file.
* registry.h: New file.
* security.h: New file.
* child_info.h: Add specific exec class.
* cygheap.h: New file. Contains declarations for cygwin heap.
* cygheap.cc: New file. Implements cygwin heap functions.
* dcrt0.cc (quoted): Simplify due to new method for passing arguments between
cygwin programs.
(alloc_stack_hard_way): Attempt to handle overlapped stack.
(dll_crt0_1): Move child_info processing here. Accomodate new method for
passing arguments between cygwin programs. Initialize cygwin heap. Establish
__argc and __argv variables.
(_dll_crt0): Move most of child_info processing to dll_crt0_1.
(cygwin_dll_init): Remove duplication.
* dtable.cc (dtable::extend): Allocate dtable using cygwin heap.
(dtable::build_fhandler): Ditto for fhandler type being constructed.
(dtable::dup_worker): Free new fhandler from cygwin heap on error.
(dtable::select_*): Don't assume that this == fdtab.
(dtable::linearize_fd_array): Delete.
(dtable::delinearize_fd_array): Delete.
(dtable::fixup_after_exec): New file.
(dtable::vfork_child_dup): Use cygwin heap.
(dtable::vfork_parent_restore): Ditto.
* dtable.h: Remove obsolete methods. Add new method.
* environ.cc (posify): Eliminate already_posix parameter and logic.
(envsize): New function.
(_addenv): Use envsize.
(environ_init): Accept an argument pointing to an existing environment list.
If supplied, allocate space for this in the the program's heap.
* fhandler.cc (fhandler_base::operator =): Move here from fhandler.h. Use
cygwin heap to allocate filenames.
(fhandler_base::set_name): Allocate/free names from cygwin heap.
(fhandler_base::linearize): Delete.
(fhandler_base::de_linearize): Delete.
(fhandler_base::operator delete): Free from cygwin heap.
(fhandler_base::~fhandler_base): Ditto.
* fhandler.h: Accomodate elimination of *linearize and other changes above.
* fhandler_console.cc (fhandler_console::fixup_after_exec): Rename from
de_linearize.
* heap.h: New file.
* fhandler_tty.cc (fhandler_tty_slave::fhandler_tty_slave): Use cygwin heap for
name. fhandler_tty::fixup_after_exec): Rename from de_linearize.
* fork.cc (fork): Call cygheap_fixup_in_child.
* heap.cc: Use declarations in heap.h.
* malloc.cc: Sprinkle assertions throughout to catch attempts to free/realloc
something from the cygwin heap.
* path.cc: Throughout, eliminate use of per-thread cache for cwd. Use cwd_*
functions rather than cwd_* variables to access cwd_win32 and cwd_posix.
(cwd_win32): New function.
(cwd_posix): New function.
(cwd_hash): New function.
(cwd_fixup_after_exec): New function.
* path.h: Accomodate path.cc changes.
* pinfo.cc (pinfo_init): Accept a pointer to an environment table. Pass this
to environ_init. Eliminate old 'title' tests.
* pinfo.h: Accomodate above change in argument.
* spawn.cc (struct av): New method for building argv list.
(av::unshift): New method.
(spawn_guts): Allocate everything that the child process needs in the cygwin
heap and pass a pointer to this to the child. Build argv list using new
method. Eliminate delinearize stuff.
* thread.h: Eliminate _cwd_win32 and _cwd_posix buffers.
* winsup.h: Eliminate obsolete functions. Add envsize() declaration.
the process. Use new second argument to set_myself.
(cygwin_dll_init): Initialize exception list and constructor stuff here.
(_dll_crt0): And here. Also, deal with inherited pinfo shared memory region
from parent.
* pinfo.cc (set_myself): Accept a second argument signifying the a shared
memory region, passed from an execing parent.
(pinfo_init): Ditto.
* pinfo.h: Ditto.
* shared.h (child_info): Add a handle field to pass to child.
* spawn.cc (spawn_guts): Create a shared handle to pass to an execed child.
* winsup.h: Remove extraneous declaration.
required.
* errno.cc: Use DWORD to hold Windows errors.
(geterrno_from_win_error): New function.
(seterrno_from_win_error): Use geterrno_from_win_error to convert supplied
windows error (suggested by Corinna Vinschen).
* path.cc (symlink_info): Add error element.
* path.cc (path_conv::check): Remove errno setting. Use new symlink_info errno
element to set path_conv error, where appropriate.
(symlink_info::check): Set error element rather than attempting to manipulate
errno. Add more checks for trailing / and /.. even though they are currently
useless. Avoid setting EINVAL.
* path.cc (normalize_posix_path): Correct check for trailing /.
recovery.
* spawn.cc (spawn_guts): Reorganize slightly to consolidate handling when there
is a CreateProcess error.
(_spawnve): Only longjmp back to vfork handling when a process has been
successfuly started.
* winsup.h (vfork_save): Extend to include frame info. Remove obsolete cpplus
conditionals.
* *.cc: put winsup.h before other headers (for __INSIDE_CYGWIN__);
use cur_environ() instead of just environ
* times.cc: remove import protections
* glob.c: add winsup.h
* localtime.c: ditto
* smallprint.c: ditto
* Makefile.in: don't __INSIDE_CYGWIN__ as it messes up profiling.
variable argument macros when possible.
* sigproc.cc: Throughout, use sigproc_printf rather than sip_printf.
* strace.cc (strace::prntf): Remove 'active' check, since callers are supposed
to ensure this.
(__system_printf): Remove. Subsumed by strace::prntf.
* winsup.h: Define "NEW_MACRO_VARARGS" to indicate when to use new macro
varargs capability.
the changes below. Redefine process structure to avoid a fixed size table.
Redefine pinfo/_pinfo classes. Use these throughout.
* dcrt0.cc (dll_crt0_1): Accomodate set_myself argument change.
(__api_fatal): Accomodate _pinfo::record_death argument change.
* exceptions.cc (really_exit): Ditto.
(sig_handle_tty_stop): Use pinfo constructor to access process info.
(events_init): Don't create pinfo_mutex since it is no longer required.
* external.cc (fillout_pinfo): Use winpids class to iterate over all system
pids.
(cygwin_internal): lock_pinfo_for_update and unlock_pinfo are now noops.
* fhandler_termios.cc (fhandler_termios::set_ctty): Use pinfo constructor to
access process info.
* fork.cc (fork): Reorganize to initialize child info after the child has
started since that is when we know the child's winpid, which is necessary to
allocate the pinfo shared memory.
* mmap.cc (recreate_mmaps_after_fork): Change arg type to _pinfo.
* pinfo.cc: Rename pinfo methods to _pinfo throughout. Eliminate pinfo_list
stuff.
(set_myself): Accept a pid argument now. Call pinfo initializer to initialize
myself. Detect when this is an "execed" process and create an "indirect" pid
block.
(pinfo_init): Accomodate set_myself arg change.
(procinfo): Remove.
(pinfo::lock_pinfo): Remove.
(pinfo::unlock_pinfo): Remove.
(pinfo::init): New method. Allocates shared memory space for process pinfo
structure.
(pinfo::record_death): Don't call locking functions.
(cygwin_winpid_to_pid): Simplify by using new pinfo constructor.
(EnumProcessesW95): New function for iterating over processes on Windows 95.
(winpids::winpids): New constructor for winpids class. Sets up a list of
process ids.
(enum_init): Initialize w95/wnt pid enumerators.
* shared.cc (shared-info::initialize): Remove pid initialization.
* shared.h: Move pinfo stuff into pinfo.h.
(class shared_info): Remove pinfo_list element.
* signal.cc (kill_worker): Use pinfo constructor to access process info.
(kill_pgrp): Ditto. Use winpids methods to access list of processes.
* sigproc.cc: Throughout, modify to use _pinfo where appropriate.
(proc_exists (pid_t)): New function. Determines if a process exists based on
the pid.
(proc_exists (_pinfo *p): Use new proc_exists function above.
(proc_subproc): Copy pinfo stuff around rather than _pinfo pointers. Try to be
careful about releasing shared memory when we don't need it anymore. Remove
pinfo locks.
(remove_zombies): Remove pinfo memory when zombie is going away.
* sigproc.h: Reflect _pinfo/pinfo changes in sigproc.cc.
* spawn.cc (spawn_guts): Eliminate pinfo *child argument. Reorganize to only
initialize child pinfo after process has been started and we know the windows
pid.
(_spawnve): Reflect spawn_guts changes.
* syscalls.cc (setpgid): Use pinfo constructor to access process info.
(getpgid): Ditto.
(internal_getlogin): Use _pinfo.
* winsup.h: Eliminate pinfo_mutex. Eliminate spawn_guts declaration since it
is static now. Reflect set_myself argument change.
* include/sys/cygwin.h: Add some PID_* enums to accomodate new pinfo stuff.
* include/cygwin/version.h: Update minor version for cygdrive changes below.
* winsup.h: Add new macros sys_wcstombs and sys_mbstowcs.
* syscalls.cc (_link): Replace calls to mbstowcs by call to
sys_mbstowcs.
* uinfo.cc (internal_getlogin): Replace calls to wcstombs and
mbstowcs by calls to sys_wcstombs and sys_mbstowcs. Replace
usage of constants by meaningful defines. Use result of
GetSystemDirectory for HOMEPATH and HOMEDRIVE as a last resort.
(environ_init): Explicitly initialize __cygwin_environ.
(cur_environ): New function. Detects when user has updated their environment.
* exec.cc: Use 'environ' define throughout rather than __cygwin_environ.
* spawn.cc: Ditto.
* winsup.h: Declare cur_environ, main_environ, environ.
detect when there are no fds to pass.
* dcrt0.cc (host_dependent_constants::init): Revert Sat Mar 18 01:32:04 2000
change.
(dll_crt0_1): Set "cygwin_finished_initializing" flag.
(dll_crt0): Don't perform memcpy if uptr is already set to internal structure.
(_dll_crt0): Remember location of programs envptr.
* dll_init.h (per_module, dll, dll_list): Revamp.
* dll_init.cc: Revamp. Use new classes.
* fork.cc (fork): Use new revamped dll, dll_list, and per_module stuff.
* environ.cc: Use __cygwin_environ throughout rather than the
user_data->envptr.
* exec.cc: Ditto.
* spawn.cc: Ditto.
* winsup.h: Declare update_envptrs, cygwin_finished_initializing.
* lib/_cygwin_crt0_common.cc (_cygwin_crt0_common): Revert previous change.
* lib/cygwin_attach_dll.cc (cygwin_attach_dll): Always pass in own per_process
structure or we end up overwriting information from the main program.
* fork.cc (fork): Use above defines instead of numerical constants.
* shared.cc (sec_user): Ditto.
* shared.h (class pinfo): Ditto.
* syscall.cc (seteuid): Ditto.
* spawn.cc (_spawnve): Ditto. Eliminate conditional.
(spawn_guts): Set child->uid = USHRT_MAX when user context will be
changed in child process.
* uinfo.cc (uinfo_init): Check for myself->uid instead of myself->psid
to avoid reloading of /etc/passwd on process startup if ntsec is off.
Use above defines instead of numerical constants.
* security.cc: Move define for MAX_SID_LEN to winsup.h.
appropriate.
(LIBCOS): Find additional stub library stuff in their own subdirectory.
* dcrt0.cc: Convert user_data pointer to static __cygwin_user_data area.
(do_global_ctors): Check magic_bisquit for initialization.
(dll_crt0_1): First group of premain functions prior to fd initialization. Run
second group before calling main.
(dll_crt0 ()): New function, called from new initialization code.
(dll_crt0 (per_process *uptr)): Call new dll_crt0 () function on
initialization.
* debug.cc (thread_stub): Initialize bottom of stack with per-thread info.
* environ.cc (parse_thing): Use binmode global to control CYGWIN=binmode
behavior.
* fhandler.cc (fhandler_base::open): Allow explicit setting of __fmode to
O_BINARY or O_TEXT to override disk mount settings.
* libcmain.cc: Move to lib subdirectory.
* libccrt0.cc: Ditto.
* dll_main.cc: Ditto.
* dll_entry.cc: Ditto.
* getopt.c: Ditto.
* thread.cc (thread_init_wrapper): Call ExitThread explicitly rather than
returning, as a preliminary step towards placing per thread info at the bottom
of the stack.
* winsup.h: Move per_process class to include/sys/cygwin.h. Declare new
dll_crt0().
* include/cygwin/version.h: Bump API minor version.
* binmode.c: New file.
* textmode.c: Ditto.
* lib/_cygwin_crt0_common.cc: Ditto.
* lib/crt0.h: Ditto.
* lib/cygwin_attach_dll.c: Ditto.
* lib/cygwin_crt0.c: Ditto.
* lib/dll_entry.cc: Ditto.
* lib/dll_main.cc: Ditto.
* lib/getopt.c: Ditto.
* lib/libcmain.c: Ditto.
* lib/premain0.c: Ditto.
* lib/premain1.c: Ditto.
* lib/premain2.c: Ditto.
* lib/premain3.c: Ditto.
Corinna Vinschen
Christopher Faylor
Conrad Scott
Robert Collins
Egor Duda
DJ Delorie