* exceptions.cc (sig_handle_tty_stop): Make sure that incyg is cleared when
exiting if we have no parent process. Only wait for signal_arrived.
(sigpacket::process): Make continue_now a bool. Delay sending signal_arrived
until the end. Make code more defensive to avoid calling signal handler when
stopped. Only set signal_arrived when stopped.
* sigproc.cc (sig_hold): Rename from sigCONT. Make static.
(sig_send): Accommodate sigCONT -> sig_hold rename.
(wait_sig): Ditto.
* sigproc.h (sigCONT): Delete declaration.
* fhandler_console.cc (fhandler_console::write): Use new '%0c' facility to
print characters. Change to paranoid to avoid excessive strace output.
* fhandler_tty.cc (fhandler_pty_master::accept_input): Make frequent strace
printf "paranoid" to help cut down on strace output size.
* signal.cc (sigsuspend): Add standard syscall strace output.
(sigpause): Ditto.
(pause): Ditto.
* cygtls.h (_cygtls::reset_signal_arrived): New function.
* cygserver_ipc.h (ipc_set_proc_info): Use _cygtls::ipc_set_proc_info to set
per-thread signal arrived value.
* cygthread.cc (cygthread::detach): Use per-thread signal_arrived via
set_thread_waiting.
* fork.cc (_cygtls::fixup_after_fork): Clear signal_arrived.
(_cygtls::remove): Close any signal_arrived handle when thread exists.
(_cygtls::find_tls): Remove unneeded function.
* cygtls.h: Update copyright.
(class _cygtls): Reorganize to help avoid rebuilding newlib when structure
changes.
(_cygtls::event): Delete.
(_cygtls::threadkill): Ditto.
(_cygtls::signal_waiting): Declare new bool.
(_cygtls::find_tls): Delete declaration.
(_cygtls::set_threadkill): Ditto.
(_cygtls::reset_threadkill): Ditto.
(_cygtls::set_signal_arrived): Declare new function.
(class set_thread_waiting): Declare new class.
* cygwait.cc (cw_nowait_storage): Define.
(cygwait): Set per-thread signal_arrived via set_thread_waiting. Don't
special-case _main_tls.
* cygwait.h (cw_nowait): Define.
(cw_infinite): Ditto.
(cygwait): Redefine pathological wait-only case.
* dcrt0.cc (dll_crt0_0): Remove call to now-defunct events_init().
(dll_crt0_1): Remove call to now-defunct create_signal_arrived().
* exceptions.cc: Reflect set_signal_mask() argument reordering throughout.
Remove signal mask synchronization throughout.
(events_init): Delete definition.
(mask_sync): Delete now-unneeded mask synchronization.
(set_signal_mask): Reverse order of arguments to "standard" to, from layout.
Rename "newmask" argument to "setmask". Remove debugging.
(sig_handle_tty_stop): Use cancelable_wait rather than WFMO.
(_cygtls::interrupt_setup): Don't treat "threadkill" events specially.
Conditionally set signal_arrived depending on whether the thread has created it
or not.
(sigpacket::process): Reorganize to reflect thread-specific sending of signals
which is more in line with the way it was actually supposed to work.
* fhandler_socket.cc (get_inet_addr): Use cancelable_wait rather than
IsEventSignalled to avoid potential race.
(fhandler_socket::wait_for_events): Set signal_arrived event using
set_thread_waiting().
(fhandler_socket::close): Use cygwait for the case of just waiting 10 ms for a
signal.
* fhandler_tape.cc (fhandler_dev_tape::_lock): Use cancelable_wait rather than
WFMO. Redo switch/case tests accordingly.
* fhandler_termios.cc (fhandler_termios::bg_check): Use cygwait for case of
just waiting 0 ms for a potential signal.
* fhandler_tty.cc (fhandler_pty_master::process_slave_output): Use
cancelable_wait rather than WFSO.
* fhandler_windows.cc (fhandler_windows::read): Set per-thread signal_arrived
via set_thread_waiting().
* flock.cc (lf_setlock): Ditto.
* select.cc (pselect): Ditto. Set per-thread signal_arrived using
set_thread_waiting().
* gendef: Don't special case handling of _cygtls::sig for threads.
* gentls_offsets: Use #pragma once in tlsoffsets.h.
* ntdll.h: Use #pragma once.
* poll.cc: Reflect set_signal_mask() argument reordering.
* posix_ipc.cc (ipc_mutex_lock): Use cancelable_wait rather than WFMO.
(ipc_cond_timedwait): Set perl-thread signal arrived using
set_thread_waiting().
* security.h: Use #pragma once.
* signal.cc (abort): Reflect set_signal_mask() argument reordering.
(clock_nanosleep): Ditto. Change call to cancelable_wait to properly specify
handling of cancel and interrupt.
(sigwaitinfo): Remove handling of per-thread event in favor of per-thread
signal_arrived. Use cancelable_wait rather than WFSO.
* sigproc.cc (signal_arrived): Delete definition.
(create_signal_arrived): Ditto.
* sigproc.h (signal_arrived): Delete declaration.
(set_signal_mask): Avoid defining as a "C" function. Don't conditionally
declare.
(create_signal_arrived): Delete declaration.
* syscalls.cc (rename): Use cygwait() rather than WFSO.
* thread.h (fast_mutex::lock): Use cw_infinite rather than LARGE_NULL.
* wait.cc (wait4): Ditto.
* thread.cc (pthread_mutex::lock): Ditto.
(pthread::join): Ditto.
(semaphore::_wait): Ditto.
(pthread_kill): Remove set_threadkill() accommodation.
* tlsoffsets.h: Regenerate.
* sigproc.cc (proc_terminate): Don't set parent pid of child to 1 if we've
execed since the execed process is still considered the parent.
* child_info.h: Bump copyright.
* pipe.cc (fhandler_pipe::create): Don't indiscriminately add process id to
every pipe since some pipe names (fifo, tty) don't need it.
* sigproc.cc (sigproc_init): Pass PIPE_ADD_PID to fhandler_pipe::create to
ensure that pid is always part of sigwait pipe name.
* globals.cc (pipe_byte): Declare.
* pipe.cc (fhandler_pipe::create): Use current process id in pipe name rather
than pid for simple name collision avoidance. Do this only once to avoid extra
overhead when a busy pipe is found. Honor pipe_byte to create non-message
pipes if set.
* sigproc.cc (sigproc_init): Use a specific name for the signal pipe.
* fork.cc (frok::parent): Call postfork to do all of the manipulation required
prior to calling pinfo::remember.
* pinfo.h (pinfo::set_rd_proc_pipe): Just set pinfo's rd_proc_pipe. Don't
bother setting it to NULL.
* sigproc.cc (child_info_spawn::wait_for_myself): Call postfork to set up
myself for waiting.
* spawn.cc (child_info_spawn::worker): Avoid now-unnecessary global lock.
Consistently test mode rather than chtype when making wr_proc_pipe decisions.
Call postfork() to set up stuff prior to pinfo::remember.
(child_info_spawn::wait_for_myself): Move function to sigproc.cc.
* pinfo.cc (is_toplevel_proc): Delete unneeded variable.
* sigproc.cc (child_info_spawn::wait_for_myself): Move function from header to
here. Do all setup required to properly wait for top-level execed process to
exit.
* spawn.cc (child_info_spawn::worker): Attempt to properly handle _P_DETACH.
Set wr_proc_pipe if top-level process even when execing. Just call
wait_for_myself() to... wait for myself. Don't call cleanup twice.
(child_info::rd_proc_pipe): Declare new field.
(child_info::wr_proc_pipe): Ditto.
(child_info::prefork): Declare new function, derived from previous pinfo
version.
* dcrt0.cc (child_info_fork::handle_fork): Close previous wr_proc_pipe when
appropriate and assign new one from passed-in child_info block.
(child_info_spawn::handle_spawn): Assign our wr_proc_pipe handle from passed-in
child_info block.
* fork.cc (child_info::prefork): Define new function.
(frok::child): Clear rd_proc_pipe and wr_proc_pipe so they will not be closed
by the child_info destructor.
(frok::parent): Use child_info prefork handling, outside of retry loop. Set
rd_proc_pipe in child's pinfo after successful CreateProcess. Eliminate
postfork call.
* globals.cc (my_wr_proc_pipe): Define/declare new variable.
* pinfo.cc (pinfo::pending_rd_proc_pipe): Delete.
(pinfo::pending_wr_proc_pipe): Ditto.
(pinfo::prefork): Ditto.
(pinfo::postfork): Ditto.
(pinfo::postexec): Ditto.
(pinfo::wait): Assume that rd_proc_pipe is set up correctly prior to call.
(_pinfo::alert_parent): Replace "wr_proc_pipe" with "my_wr_proc_pipe".
* pinfo.h (_pinfo::_wr_proc_pipe): Delete declaration.
(_pinfo::set_rd_proc_pipe): Define new function.
(pinfo::pending_rd_proc_pipe): Delete declaration.
(pinfo::pending_wr_proc_pipe): Ditto.
(pinfo::prefork): Ditto.
(pinfo::postfork): Ditto.
(pinfo::postexec): Ditto.
(pinfo::wr_proc_pipe): Ditto.
* sigproc.cc (child_info::child_info): Clear rd_proc_pipe and wr_proc_pipe.
(child_info::cleanup): Close rd_proc_pipe and wr_proc_pipe if necessary.
(child_info_fork::child_info_fork): Set forker_finished to NULL by default.
(child_info_spawn::child_info_spawn): Use my_wr_proc_pipe rather than
myself->wr_proc_pipe.
(child_info::sync): Ditto.
(child_info_spawn::cleanup): Call child_info::cleanup.
* spawn.cc (child_info_spawn::worker): Remove call to myself.prefork(). Set
wr_proc_pipe when execing or set up new rd_proc_pipe/wr_proc_pipe via
child_info::prefork when spawning. Remove call to pinfo::postexec. Set
rd_proc_pipe in child pinfo when spawning. Use my_wr_proc_pipe rather than
myself->wr_proc_pipe. Remove call to postfork.
* exceptions.cc (stackdump): Rework to perform all operations needed for a
stackdump and to avoid recursion.
(exception::handle): Use simplified stackdump interface.
* sigproc.cc (signal::exit): Ditto. Delete now, uneeded declaration.
* fhandler.h: Use #pragma once rather than ifdef guards.
(fhandler_console::tc_getpgid): Return our pgid if we have never opened a
console.
* fork.cc: Rearrange includes to accommodate fhandler.h use of pinfo.h.
* sigproc.cc: Ditto.
* spawn.cc: Ditto.
(child_info_spawn::worker): Query myself->pgid rather than calling expensive
function.
* thread.h: Use #pragma once rather than ifdef guards.
* pinfo.h: Use #pragma once rather than ifdef guards.
(pinfo::remember): Don't define if sigproc.h has not been included.
(pinfo::reattach): Ditto.
* sigproc.h: Use #pragma once rather than ifdef guards. Use different test to
see if pinfo.h has been included.
_my_tls.remove along with a comment.
(sigpacket::process): Remove code which now causes a gdb deadlock.
* sigproc.cc (_cygtls::signal_exit): Signal debugger with signal number
earlier.
dynamically loaded since fork() doesn't work in that scenario anyway.
(dll_dllcrt0_1): Don't accommodate dynamically loaded dlls.
* exceptions.cc (ctrl_c_handler): Don't lock the process; there's too much risk
of deadlock.
* sigproc.cc (_cygtls::remove_wq): Don't try to remove anything from the waitq
if there is obviously nothing there.
* strace.cc (strace::activate): Allow stracing dynamically loaded cygwin1.dll.
(_cygtls::signal_exit): Close my_readsig via close_my_readsig(), avoiding
communication with the signal pipe.
(wait_sig): Close my_readsig via close_my_readsig().
never remember what it stands for.
(sig_handle_tty_stop): Remove obsolete call to sig_handle_tty_stop.
(_cygtls::call_signal_handler): Rework to grab signal information from
_main_tls if none is set for _my_tls. Try harder to keep thread locked.
(reset_signal_arrived): Delete.
* fhandler.cc (fhandler_base_overlapped::wait_overlapped): Use new cygWFMO call
to wait for an event + standard cygwin stuff. Modify debug output to
acccomodate new function.
* fhandler_console.cc (fhandler_console::read): Replace WaitForMultipleObjects
with cygWFMO.
* fhandler_socket.cc (get_inet_addr): Add comment.
* gendef (_sigdelayed): Remove call to reset_signal_arrived.
* sigproc.cc (_cygtls::signal_exit): Don't close my_readsig here unless we're
in the signal thread.
(create_signal_arrived): Create signal_arrived as auto-reset so that only one
thread is woken when a signal arrives.
* sigproc.h (cygWFMO): New function.
(reset_signal_arrived): Delete declaration.
Throughout, change syscalls to report on return values using new %R format
option.
* smallprint.cc (__small_vsprintf): Add parsing for %R to report on return
values and possible errno from syscalls.
* errno.cc (errmap): Add PRIVILEGE_NOT_HELD.
* fhandler_tty.cc (fhandler_pty_master::setup): When creating a thread use
shorter name to reduce debuggging output.
* select.cc (start_thread_pipe): Ditto.
(start_thread_serial): Ditto.
(start_thread_socket): Ditto.
(start_thread_mailslot): Ditto.
* sigproc.cc (talktome): Ditto.
(signal_exit): Move to sigproc.cc.
* sigproc.cc (signal_exit): Move here. Declare stackdump extern. Set
my_sendsig to indicate that signals are no longer available.
(my_readsig): Make Static again.
(sig_send): Interpret ERROR_BROKEN_PIPE as ESRCH. Remove special-case EACCESS
errno setting, just setting errno generally, even for "its_me" case.
(_cygtls::signal_exit): ...here. Close my_readsig and comment on why.
* pinfo.cc (pinfo::exit): Move sigproc_terminate earlier. Set exiting flag in
lock_process.
* sigproc.cc (my_readsig): Make global.
* sync.cc (muto::exiting_thread): Delete.
(muto::acquire): Delete #if 0'ed code.
* sync.h (muto::exiting_thread): Delete.
(set_exiting_thread): Ditto.
(lock_process::lock_process): Don't worry about setting the exiting thread
since it had no meaning.
process of setting up the DLL and no name is known.
* dcrt0.cc (initial_env): Remove CYGWIN_SLEEP stuff.
(get_cygwin_startup_info): Activate strace here as appropriate.
(dll_crt0_0): Move get_cygwin_startup_info as early as possible to avoid
missing strace output.
* fork.cc (frok::child): Move debugging statement to point where ppid will be
set.
* pinfo.cc (pinfo::thisproc): Remove obsolete call to strace.hello. Tweak
debug output slightly.
* select.cc (select_stuff::wait): Allow APCS to be triggered while waiting
since we use them now. Report when that happens.
* sigproc.cc (child_info::child_info): Use strace.active() rather than
strace.attached().
* spawn.cc (child_info_spawn::worker): Only write strace child pid when we know
it's a cygwin process. Accommodate change to write_child argument list.
* strace.cc (strace::hello): Delete. Move functionality...
(strace::activate): ...to here.
(mypid): Just use raw GetCurrentProcessId () if myself isn't set.
(strace::write_childpid): Don't wait for subproc_ready. Remove arg which was
required for it.
* include/sys/strace.h (strace::hello): Delete.
(strace::write_childpid): Delete first argument.
* dcrt0.cc (get_cygwin_startup_info): Signal readiness when stracing since
strace::write_child relies on it. Use strace.activate to notify strace
process, passing in arg indicating whether we're forked.
* sigproc.cc (wait_sig): Accommodate new strace::activate argument.
* spawn.cc (child_info_spawn::worker): Oops. Previous suspended test was
actually correct. Revert and document.
* strace.cc (strace::activate): Send additional flag indicating whether this is
an attempt to activate a forked process.
(strace::hello): Report on windows pid.
* include/sys/strace.h (strace::strace): Make a dummy.
(strace::activate): Modify declaration to accept an argument.
(strace::write_childpid): Set regparm.
* child_info.h (child_info): Reorganize some elements so that the ones which
are initialized in a constructor are all together.
* sigproc.cc (child_info::child_info): Initialize values via the constructor
rather than as C statements and make sure that flags is set to zero initially.
* spawn.cc (child_info_spawn::worker): Use iscygwin() test for determining when
to send strace info since it is more foolproof than checking the suspend state.
"create_selectable". Change return to DWORD.
(fhandler_pty_common::pipesize): New constant.
* fhandler_fifo.cc (fhandler_fifo::fhandler_fifo): Reflect create_selectable
name change.
* miscfuncs.cc (CreatePipeOverlapped): Ditto.
* pipe.cc (fhandler_pipe::create): Ditto.
(fhandler_pipe::create): Rename from the misnamed "create_selectable". Return
DWORD. Only set pipe size to default when it is passed in as zero.
* fhandler_tty.cc (fhandler_pty_master::setup): Ditto. Use
fhandler_pty_common::pipesize rather than a raw constant.
* tty.cc (tty::not_allocated): Ditto.
* sigproc.cc (sigproc_init): Use create_selectable to create the signal pipe to
get a more appropriate message based pipe.
have been terminated prior to setting flag.
* signal.cc (sigwaitinfo): Zero event before closing to signal other threads
that it is no longer available.
(cygheap_exec_info::nchildren): Move from child_info_spawn.
(cygheap_exec_info::cchildren): Ditto.
(cygheap_exec_info::record_children): Declare new function.
(cygheap_exec_info::reattach_children): Ditto.
(cygheap_exec_info::alloc): Ditto.
(child_info_spawn::nchildren): Move to cygheap_exec_info.
(child_info_spawn::cchildren): Ditto.
* sigproc.cc (cygheap_exec_info::alloc): Define new function.
(child_info_spawn::cleanup): Accommodate move of children info to
cygheap_exec_info.
(cygheap_exec_info::record_children): Define new function.
(cygheap_exec_info::reattach_children): Ditto.
(child_info_spawn::record_children): Use cygheap_exec_info function to
accomplish this task.
(child_info_spawn::reattach_children): Ditto.
* spawn.cc (child_info_spawn::worker): Allocate moreinfo using
cygheap_exec_info::alloc.
* dcrt0.cc (child_info_fork::alloc_stack_hard_way): Use abort for the error to
avoid a retry.
Throughout rename _PROC_* to _CH_*.
* child_info.h: Include "pinfo.h".
(child_info_types): Rename _PROC_* -> _CH_* to avoid confusion with similarly
named constants.
(_PROC_*): Delete unneeded aliases.
(PROC_*): Ditto.
(CURR_CHILD_INFO_MAGIC): Ditto.
(cchildren): Define using "pinfo_minimal".
(child_info::set_saw_ctrl_c): Move to
(child_info_spawn::set_saw_ctrl_c): Here.
(child_info_spawn::lock): New field.
(child_info_spawn::hExeced): Ditto.
(child_info_spawn::ev): Ditto.
(child_info_spawn::~child_info_spawn): Move to sigproc.cc.
(child_info_spawn::child_info_spawn): Ditto.
(child_info_spawn::cleanup): Declare new function.
(child_info_spawn::set_saw_ctrl_c): Move to this class. Set flag only when
execed and return true when we have set the flag.
(child_info_spawn::child_info_spawn::signal_myself_exited): New function.
(child_info_spawn::wait_for_myself): Ditto.
(child_info_spawn::has_execed_cygwin): Ditto.
(child_info_spawn::has_execed): Ditto. Replaces "hExeced" test.
(child_info_spawn::operator HANDLE&): New operator.
(child_info_spawn::worker): Define old "spawn_guts" as class member.
(ch_spawn): Declare.
(have_execed): Define.
(have_execed_cygwin): Ditto.
* cygheap.h: Update comment.
* dcrt0.cc (get_cygwin_startup_info): Use _CH_* enums.
(child_info_spawn::handle_spawn): Ditto.
(dll_crt0_0): Ditto.
(multiple_cygwin_problem): Ditto.
* exceptions.cc (chExeced): Delete obsolete declaration.
(ctrl_c_handler): Reference set_saw_ctrl_c via new ch_spawn global.
* globals.cc (hExeced): Delete.
* pinfo.cc (pinfo::thisproc): Refer to cygheap as ::cygheap for consistency in
handle naming when -DDEBUGGING.
(pinfo::init): Accommodate case where myself.h is known but h0 is passed in.
(pinfo::pinfo): New constructor for setting up a pinfo passed in by previous
exec'or.
(pinfo::proc_waiter): Don't handle subprocess if we're in the process of
exiting due to an exec of a cygwin process. Don't close rd_proc_pipe here.
Close it when we actually are finished with the process. Use new
ch_spawn.signal_myself_exited function to let exec stub know that subprocess
has exited.
(pinfo::wait): Clarify debugging output.
(pinfo::release): Use "close_h" to close all handles to avoid races.
(winpids::add): Assume that elements of the array do not need to be zeroed and
are properly initialized or suffer problems on pinfo::release. Don't close
hProcess since release does that now.
* pinfo.h: Update comment.
(pinfo_minimal): Move some elements from pinfo here so that child_info_spawn
can use them.
(pinfo): Inherit from pinfo_minimal.
(pinfo::pinfo): Modify to accommodate new pinfo_minimal.
(pinfo::allow_remove): New function.
* sigproc.cc (proc_subproc): Use boolean values for true/false. Implement
PROC_EXEC_CLEANUP.
(proc_terminate): Set ppid = 1 since the procs list will only be iterated when
the process has not execed. Don't do any cleanup here since it is now handled
in pinfo::release.
(sigproc_init): Initialize sync_proc_subproc earlier.
(child_info::child_info): Assume that all important fields are properly
initialized and avoid memset().
(child_info_spawn::child_info_spawn): Specifically test for execing and then
set up appropriate fields in the struct.
(child_info_spawn::cleanup): Define new function.
(child_info_spawn::record_children): Specifically test for being execed here.
Fill in pinfo_minimal part of children array.
(child_info_spawn::reattach_children): Use constructor to duplicate information
for previous exec'or. Add more debugging output.
(remove_proc): Force deletion of thread when exiting due to exec. Rely on
pinfo::cleanup in release.
* sigproc.h (PROC_EXEC_CLEANUP): New enum.
(PROC_DETACHED_CHILD): Delete.
* spawn.cc (chExeced): Delete.
(child_info_spawn::worker): Rename from spawn_guts. Use elements of
child_info_spawn throughout rather than ch.whatever. Use ::cygheap to refer to
global rather than element of child_info. Use wait_for_myself() rather than
waitpid(). Call child_info_spawn::cleanup on function return.
(spawnve): Reflect movement of spawn_guts functionality into
child_info_spawn::worker.
* syscalls.cc (popen): Ditto.
* winsup.h (spawn_guts): Delete declaration.
* fhandler.cc (fhandler_base::ptsname_r): Define.
* fhandler.h (fhandler_base::ptsname): Delete.
(fhandler_base::ptsname_r): Declare.
(fhandler_pty_master::ptsname_r): Declare.
* fhandler_tty.cc (fhandler_pty_master::ptsname): Delete.
(fhandler_pty_master::ptsname_r): New reentrant function derived from previous
ptsname.
* syscalls.cc (ptsname_r): Implement new function with functionality similar to
Linux.
(ptsname): Use ptsname_r () to fill out buf.
* include/cygwin/stdlib.h (ptsname_r): Declare.
* include/cygwin/version.h: Bump CYGWIN_VERSION_API_MINOR to 255 to reflect
export of ptsname_r.
* pinfo.cc (pinfo::wait): Return bool rather than int.
* pinfo.h (info::wait): Ditto.
(pinfo::reattach): Define !defined(_SIGPROC_H) case for consistency.
* sigproc.cc (child_info_spawn::reattach_children): Use correct dwProcessId
rather than pid when duplicating handle.
succeeds. Return true for success.
* sigproc.cc (child_info_spawn::reattach_children): Try harder to clean up on
error by detecting reattach failures too.
(child_info_spawn::nchildren): Rename from nprocs.
(child_info_spawn::children): Change type to cchildren for more bookkeeping
possibilities.
(child_info_spawn::child_info_spawn): Clear nchildren.
(child_info_spawn::record_children): Declare new function.
(child_info_spawn::reattach_children): Ditto.
* dcrt0.cc (child_info_spawn::handle_spawn): Call reattach_children to gather
list of processes we are potentially waiting for.
* pinfo.h (pinfo::pinfo): Make sure that rd_proc_pipe is always cleared.
(pinfo::reattach): New function.
* sigproc.cc: Move pinfo.h earlier so that it can be used in sigproc.h.
(get_proc_lock): Don't bother with a lock during DLL initialization.
(proc_subproc): Handle PROC_REATTACH_CHILD.
(proc_terminate): Orphan children only when we are not an execed process or
when the pid is about to be occupied by a non-cygwin process.
(child_info_spawn::record_children): Define new function.
(child_info_spawn::reattach_children): Ditto.
* sigproc.h (procstuff): Define PROC_REATTACH_CHILD and renumber other
elements.
* spawn.cc (spawn_guts): Record any to-be-waited-for subprocesses if about to
exec a cygwin process.
* sigproc.cc (sig_send): Fix harmless transposition of fifth and six arguments
to DuplicateHandle().
(child_info::child_info): Ditto.
* globals.cc (hExeced): Make NO_COPY.
(dtable::init_std_file_from_handle): Close console handle early, before
initialization. Build up openflags for passing to open_setup, just to be safe.
(last_tty_dev): New variable.
(fh_last_tty_dev): New macro.
(fh_alloc): Try again to keep track of previously opened tty, this time by just
saving the device and using that to potentially open an archetype. Avoid
setting the "/dev/tty" name if the creation of the fhandler failed.
(build_fh_pc): Remove unused second argument. Reorganize how and where the
name is set. Set last_tty_dev as appropriate. Avoid a NULL dereference in a
debug printf.
* dtable.h (build_fh_pc): Reflect removal of second parameter.
* fhandler.cc (fhandler_base::reset): Use new '<<' operator to copy pc since it
preserves any potentially previously set name.
(fhandler_base::set_name): Ditto.
* fhandler.h (fhandler_*::clone): Throughout use ccalloc to allocate new
fhandler, primarily to make sure that pc field is properly zeroed.
(fhandler_termios::last): Eliminate.
(fhandler_termios): Remove setting of last.
(fhandler_base::~fhandler_termios): Ditto.
* fhandler_console.cc (fhandler_console::open): Don't make decisions about
opening close-on-exec handles here since it makes no sense for archetypes.
(fhandler_console::init): Assume that input handle has already been opened.
* fhandler_termios.cc (fhandler_termios::last): Delete.
* path.h (path_conv::eq_worker): New function. Move bulk of operator = here.
(operator <<): New function.
(operator =): Use eq_worker to perform old functionality.
* devices.cc: Regenerate.
* dtable.cc: (fh_alloc): Preserve /dev/tty name when that's what we opened.
(build_fh_pc): Preserve any existing name.
* fhandler.cc (fhandler_base::open_with_arch): Ditto.
* fhandler_tty.cc (fhandler_pty_master::fhandler_pty_master): Force the name to
/dev/ptmx while preserving other pty master device information.
* path.h (cfree_maybe): New macro.
(path_conv::operator =): Free any allocated strings in target.
(path_conv::free_strings): Delete unused function.
* sigproc.cc (proc_terminate): Remove previous accommodation for execed
processes since it didn't have the desired effect. Change comment to a FIXME.
* spawn.cc (chExeced): Mark NO_COPY.
(exe_suffixes): Ditto.
pseudo signal to process group instead of just calling
init_console_handler.
* sigproc.cc (wait_sig): Call init_console_handler here on __SIGSETPGRP
signal.
* sigproc.h (__SIGSETPGRP): Define.
(ReadPipeOverlapped): Ditto.
(WritePipeOverlapped): Ditto.
* miscfuncs.h: Declare new functions.
* pinfo.cc (commune_process): Call WritePipeOverlapped instead of
WriteFile. Set timeout to 1 sec.
(_pinfo::commune_request): Call ReadPipeOverlapped instead of ReadFile.
Set timeout to 0.5 secs.
* sigproc.cc (sig_send): Create pipe using CreatePipeOverlapped.
Christopher Faylor
Corinna Vinschen