fhandler_fifo::take_ownership() is called from select.cc::peek_fifo
and fhandler_fifo::raw_read and could potentially block indefinitely
if something goes wrong. This is always undesirable in peek_fifo, and
it is undesirable in a nonblocking read. Fix this by adding a timeout
parameter to take_ownership.
Arbitrarily use a 1 ms timeout in peek_fifo and a 10 ms timeout in
raw_read. These numbers may have to be tweaked based on experience.
Replace the call to cygwait in take_ownership by a call to WFSO.
There's no need to allow interruption now that we have a timeout.
fhandler_fifo::take_ownership() tacitly assumes that the current
owner's fifo_reader_thread will be woken up from WFMO when
update_needed_evt is signaled. But it's possible that the the current
owner's fifo_reader_thread is at the beginning of its main loop rather
than in its WFMO call when that event is signaled.
In this case the owner will never see that the event has been
signaled, and it will never update the shared fifo_client_handlers.
The reader that wants to take ownership will then spin its wheels
forever.
Fix this by having the current owner call update_shared_handlers at
the beginning of its loop, if necessary.
microcode is unsigned long long, printed by _small_sprintf using %x;
Cygwin32 used last 4 bytes of microcode for next field MHz, printing 0;
use correct _small_sprintf format %X to print microcode, producing
correct MHz value under Cygwin32
CPUID 7:0 EDX[14] serialize added in linux-next 5.8 by Ricardo Neri-Calderon:
The Intel architecture defines a set of Serializing Instructions (a
detailed definition can be found in Vol.3 Section 8.3 of the Intel "main"
manual, SDM). However, these instructions do more than what is required,
have side effects and/or may be rather invasive. Furthermore, some of
these instructions are only available in kernel mode or may cause VMExits.
Thus, software using these instructions only to serialize execution (as
defined in the manual) must handle the undesired side effects.
As indicated in the name, SERIALIZE is a new Intel architecture
Serializing Instruction. Crucially, it does not have any of the mentioned
side effects. Also, it does not cause VMExit and can be used in user mode.
This new instruction is currently documented in the latest "extensions"
manual (ISE). It will appear in the "main" manual in the future.
https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/arch/x86/include/asm/cpufeatures.h?id=85b23fbc7d88f8c6e3951721802d7845bc39663d
C compilers may fold const values at compile time, so expressions
which try to elicit underflow/overflow by performing simple
arithemetic on suitable values will not generate the required
exceptions.
Work around this by replacing code which does these arithmetic
operations with calls to the existing __math_xflow functions that are
designed to do this correctly.
Signed-off-by: Keith Packard <keithp@keithp.com>
----
v2:
libm/math: Pass sign to __math_xflow instead of muliplying result
Compiling
#include <sys/select.h>
void f(int X)
{
fd_set set;
FD_ZERO(&set);
FD_SET(X,&set);
FD_CLR(X+1,&set);
(void)FD_ISSET(X+2,&set);
}
results in plenty of gcc warnings when compiled with
-Wconversion -Wsign-conversion:
fds.c:7:2: warning: conversion to ‘long unsigned int’ from ‘int’ may
FD_SET(X,&set);
^~~~~~
[...]
The unsigned NFDBITS macro combined with the signed 1L constant
are causing lots of implicit signed/unsigned type conversions.
Fix this by updating the FD_* macro code to the latest from FreeBSD
and adding an (int) cast to _NFDBITS.
As a side-effect, this fixes the visibility of NFDBITS and
fds_bits (only if __BSD_VISIBLE).
This also eliminates the old, outdated fd_set workaround.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Newlib's posix_spawn has been taken from FreeBSD. The code relies on
BSD-specific behaviour of vfork, namely the fact that vfork blocks
the parent until the child exits or calls execve as well as the fact
that the child shares parent memory in non-COW mode.
This behaviour can't be emulated by Cygwin. Cygwin's vfork is
equivalent to fork. This is POSIX-compliant, but it's lacking BSD's
vfork ingrained synchronization of the parent to wait for the child
calling execve, or the chance to just write a variable and the parent
will see the result.
So this requires a Cygwin-specific solution. The core function of
posix_spawn, called do_posix_spawn is now implemented twice, once using
the BSD method, and once for Cygwin using Windows synchronization under
the hood waiting for the child to call execve and signalling errors
upstream. The Windows specifics are hidden inside Cygwin, so newlib
only calls internal Cygwin functions.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Stop after we've written the dump in response to the initial breakpoint
EXCEPTION_DEBUG_EVENT we recieve for attaching to the process.
(rather than bogusly sitting there for 20 seconds waiting for more debug
events from a stopped process after we've already written the dump).
ld: libm.a(lib_a-fesetenv.o): in function `fesetenv':
newlib/libm/machine/arm/fesetenv.c:38: undefined reference to `vmsr_fpscr'
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Use the already existing stub files if possible. These files are
necessary to override the stub implementation with the machine-specific
implementation through the build system.
Reviewed-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Signed-off-by: Eshan dhawan <eshandhawan51@gmail.com>
The previous fenv support for ARM used the soft-float implementation of
FreeBSD. Newlib uses the one from libgcc by default. They are not
compatible. Having an GCC incompatible soft-float fenv support in
Newlib makes no sense. A long-term solution could be to provide a
libgcc compatible soft-float support. This likely requires changes in
the GCC configuration. For now, provide a stub implementation for
soft-float multilibs similar to RISC-V.
Move implementation to one file and delete now unused files. Hide
implementation details. Remove function parameter names from header
file to avoid name conflicts.
Provide VFP support if __SOFTFP__ is not defined like glibc.
Reviewed-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Signed-off-by: Eshan dhawan <eshandhawan51@gmail.com>
This patch fixes a bug in RISC-V's memcpy implementation where an
integer wraparound occurs when src + size < 8 * sizeof(long), causing
the word-sized copy loop to be incorrectly entered.
Signed-off-by: Chih-Mao Chen <cmchen@andestech.com>
It's working on 32 bit OSes only anyway. It even fails on WOW64.
Drop unsupported NtMapViewOfSection flags.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Use the (undocumented) MEMORY_WORKING_SET_EX_INFORMATION in dumper to
determine if a MEM_IMAGE region is unsharable, and hence has been
modified.
After this, we will end up dumping memory regions where:
- state is MEM_COMMIT (i.e. is not MEM_RESERVE or MEM_FREE), and
-- type is MEM_PRIVATE and protection allows reads (i.e. not a guardpage), or
-- type is MEM_IMAGE and attribute is non-sharable (i.e. it was WC, got
written to, and is now a RW copy)
After this, we will end up dumping memory regions where:
- state is MEM_COMMIT (i.e. is not MEM_RESERVE or MEM_FREE), and
-- type is MEM_PRIVATE and protection allows reads (i.e. not a guardpage), or
-- type is MEM_IMAGE and protection allows writes
Making this decision based on the current protection isn't 100% correct,
because it may have been changed using VirtualProtect(). But we don't
know how to determine if a region is shareable.
(As a practical matter, anything which gets us the stack (MEM_PRIVATE)
and .data/.bss (RW MEM_IMAGE) is going to be enough for 99% of cases)
Commit 605bdcd410 enabled mapping beyond
EOF in 64 bit environments. But the variable 'orig_len' did not get
rounded up to a multiple of 64K. This rounding was done on 32 bit
only. Fix this by rounding up orig_len on 64 bit, in the same place
where 'len' is rounded up.
Rounding up is needed to make sigbus_page_len a multiple of the
allocation granularity.
In addition, failing to round up could cause orig_len to be smaller
than len. Since these are both unsigned values, the statement
'orig_len -= len' could then cause orig_len to be huge, and mmap would
fail with errno EFBIG.
I observed this failure while debugging the problem reported in
https://sourceware.org/pipermail/cygwin/2020-July/245557.html.
The failure can be seen by running the test case in that report under
gdb or strace.
- After commit 0365031ce1, key input
becomes not working by following steps.
1) Start cmd.exe in mintty.
2) Open another mintty.
3) Execute "echo AAA > /dev/pty*" (pty* is the pty opened in 1.)
This patch fixes the issue.
Use cygwait in take_ownership to allow interruption while waiting to
become owner. Return the cygwait return value or a suitable value to
indicate an error.
raw_read now checks the return value and acts accordingly.
If update_my_handlers fails to duplicate one or more handles, just
mark the corresponding handlers as being in an error state.
But if update_my_handlers is unable to open the process of the
previous owner, it's likely that something serious has gone wrong, so
we continue to make that a fatal error.
When a reader takes ownership in fifo_reader_thread, it now goes
directly to the part of the main loop that listens for a connection.
Previously it went back to the beginning of the loop.
Also, if the reader has to delay taking ownership because the previous
owner has not finished updating the shared fifo_client handlers, it
now checks to see if cancel_evt has been set. Previously it might
have had to spin its wheels unnecessarily only to eventually find that
its thread had been canceled.
Add a bool member 'last_read' to the fifo_client_handler structure,
which is set to true on a successful read. This is used by raw_read
as follows.
When raw_read is called, it first locates the writer (if any) for
which last_read is true. raw_read tries to read from that writer and
returns if there is input available. Otherwise, it proceeds to poll
all the writers, as before.
The effect of this is that if a writer writes some data that is only
partially read, the next attempt to read will continue to read from
the same writer. This should reduce the interleaving of output from
different writers.
When a reader opens, it needs to block if there are no writers open
(unless is is opened with O_NONBLOCK). This is easy for the first
reader to test, since it can just wait for a writer to signal that it
is open (via the write_ready event). But when a second reader wants
to open, all writers might have closed.
To check this, use a new '_nwriters' member of struct fifo_shmem_t,
which keeps track of the number of open writers. This should be more
reliable than the previous method.
Add nwriters_lock to control access to shmem->_nwriters, and remove
reader_opening_lock, which is no longer needed.
Previously only readers had access to the shared memory, but now
writers access it too so that they can increment _nwriters during
open/dup/fork/exec and decrement it during close.
Add an optional 'only_open' argument to create_shmem for use by
writers, which only open the shared memory rather than first trying to
create it. Since writers don't need to access the shared memory until
they have successfully connected to a pipe instance, they can safely
assume that a reader has already created the shared memory.
For debugging purposes, change create_shmem to return 1 instead of 0
when a reader successfully opens the shared memory after finding that
it had already been created.
Remove check_write_ready_evt, write_ready_ok_evt, and
check_write_ready(), which are no longer needed.
When opening a writer and looping to try to get a connection, recheck
read_ready at the top of the loop since the number of readers might
have changed.
To slightly speed up the process of opening the first reader, take
ownership immediately rather than waiting for the fifo_reader_thread
to handle it.
When the owning reader closes and there are still readers open, the
owner needs to wait for a new owner to be found before closing its
fifo_client handlers. This involves a loop in which dec_nreaders is
called at the beginning and inc_nreaders is called at the end. Any
other reader that tries to access shmem->_nreaders during this loop
will therefore get an inaccurate answer.
Fix this by adding an nreaders method and using it instead of
dec_nreaders and inc_nreaders. Also add nreaders_lock to control
access to the shmem->_nreaders.
Make various other changes to improve the reliability of finding a new
owner.
If __HAVE_LOCALE_INFO__ is not defined, then the locale in the
locale-specific ctype functions is ignored. In the previous
implementation this resulted in compiler warnings. For example:
int main()
{
locale_t locale;
locale = duplocale(uselocale((locale_t)0));
isspace_l('x', locale);
return 0;
}
gcc -Wall main.c
main.c: In function 'main':
main.c:6:11: warning: variable 'locale' set but not used [-Wunused-but-set-variable]
6 | locale_t locale;
| ^~~~~~
Since FD_CONNECT is only given once, we manually need to set
FD_WRITE for connection failed sockets to have consistent
behaviour in programs calling poll/select multiple times.
Example test to non-listening port: curl -v 127.0.0.1:47
Ken Brown
Brian Inglis
Keith Packard
Corinna Vinschen
Jon Turney
Sebastian Huber
Eshan dhawan
PkmX via Newlib
Takashi Yano via Cygwin-patches
Aschref Ben Thabet
Marc Hoersken