signal_arrived and for sigCONT.
(sigpacket::process): Enforce sending of both signal_arrived and sigCONT, where
appropriate.
* gendef (sigreturn): Save tls pointer in ebx so that it can jump into
sigdelayed and use the same register.
initialization.
* dcrt0.cc (initial_env): Can it really be true that XP doesn't allow attaching
a debugger during DLL attach? Add temporary workaround.
(dll_crt0_0): Ensure that _impure_ptr stdio is initialized before any threads.
(dll_crt0_1): Move _impure_ptr initialization to dll_crt0_0.
* exceptions.cc (try_to_debug): Reinstate old method for looping while
debugging.
* syscalls.cc (_cygwin_istext_for_stdio): Regularize debugging output. Remove
hopefully extraneous check.
(setmode_helper): Add debugging output for improbable case. Use "binary"
rather "raw" for consistency.
access.
* fhandler.cc (fhandler_base::fhaccess): Return int. Use consistent variable
name for exit value. Exit at bottom, printing debugging information, like
other cygwin functions.
* fhandler.h (fhandler_base::has_acls): Make pass through for path_conv method.
(fhandler_base::isremote): Ditto.
(fhandler_base::is_fs_special): Ditto.
(fhandler_base::has_attribute): Ditto. Define new function.
(fhandler_base::fhaccess): Declare new function based on access_worker.
(fhandler_base::set_has_acls): Eliminate obsolete function.
(fhandler_base::set_isremote): Ditto.
* fhandler.cc (fhandler_base::fhaccess): Move from syscalls.cc and into
fhandler_base class. Use fhandler methods to access data rather than path_conv
stuff.
(fhandler_base::device_access_denied): Use fhaccess method.
* fhandler_disk_file.cc (fhandler_disk_file::opendir): Ditto.
(fhandler_base::open_fs): Remove calls to obsolete functions.
* fhandler_virtual.cc (fhandler_virtual::open): Ditto.
* winsup.h (access_worker): Remove obsolete access_worker declaration.
*syscalls.cc (access_worker): Move function to fhandler.cc.
(access): Use fhaccess method.
* pinfo.cc (_pinfo::set_ctty): Clarify debugging output.
* sigproc.cc (sig_dispatch_pending): Ditto.
* syscalls.cc (setsid): Perform minor rearrangement.
* exceptions.cc (setup_handler): Improve debugging output.
(call_signal_handler_now): Remove ill-advised debugger call.
* sigproc.cc (sigcomplete_main): Delete.
(sig_send): Honor FIXME and avoid using main thread's completion event for
everything or suffer races.
(pending_signals::add): Default stored mask to current process mask rather than
mask at time of signal send.
(wait_sig): Add debugging output.
* sigproc.h (sigpacket::mask_storage): Delete.
numbers to control special behavior for devices which take units.
* fhandler_raw.cc (fhandler_dev_raw::writebuf): Ditto.
(fhandler_dev_raw::fstat): Ditto.
(fhandler_dev_raw::open): Ditto.
(fhandler_dev_raw::ioctl): Ditto.
TIOCSWINSZ. It is not an error for ioctl_request_event to be missing.
* sigproc.cc (pending_signals::save): New function.
(pending_signals::restore): Ditto.
(sig_clear): Save/restore current queue pointer.
(wait_sig): Delete signals marked as such.
* sigproc.h (__SIGDELETE): New enum.
* cygmalloc.h: Make more concessions to attempts to get debugging malloc
working.
* debug.h: Ditto.
* dlmalloc.cc: Ditto.
* dlmalloc.h: Ditto.
* malloc_wrapper.cc: Ditto.
* perthread.h (perthread::create): Use calloc to ensure zeroed memory.
we're not closing what we think we're closing.
(sig_send): Improve debugging when exiting due to no_signals_available.
* wincap.h (wincaps::cant_debug_dll_entry): New element.
* wincap.cc: Implement above element throughout.
* dcrt0.cc (initial_env): Accommodate changes necessary to allow initial
debugging for systems which do not allow debugging in dll_entry.
(dll_crt0_0): Add initial_env call back here.
* Makefile.in (install-man): Use mandir as target for installation.
* include/cygwin/version.h: Bump DLL minor number to 7 (should have been done
earlier).
* cygwin.din: Make clock SIGFE. Add clock_gettime, sigwaitinfo, timer_create,
timer_delete, timer_settime.
* include/cygwin/version.h: Reflect above additions.
* fork.cc (fork_child): Call fixup_timers_after_fork.
* signal.cc (sigwait): Remove unused variable.
* timer.cc: New file.
(clock_gettime): Define new function.
(timer_tracker): Define new struct used by timer functions.
(timer_tracker::timer_tracker): New function.
(to_us): New function.
(timer_thread): New function.
(timer_tracker::settime): New function.
(timer_create): New function.
(timer_settime): New function.
(timer_delete): New function.
(fixup_timers_after_fork): New function.
* cygthread.cc: Bump thread count.
* signal.cc (sigwaitinfo): Define new function.
(sigwait): Redefine based on sigwaitinfo.
* include/cygwin/signal.h (sigwaitinfo): Declare.
(sigwait): Ditto.
* dtable.cc (dtable::vfork_parent_restore): Avoid double close of ctty when
ctty == ctty_on_hold.
* cygtls.h (_threadinfo::threadkill): New element.
(_threadinfo::set_threadkill): Declare new function.
(_threadinfo::reset_threadkill): Declare new function.
* dcrt0.cc (dcrt0_1): Call here so that it will be possible to attach to
running process with #(*& Windows Me/9x.
(initial_env): Try to initialize strace if uninitialized.
* gendef: Don't zero signal if threadkill is set since that will happen in the
called function.
* signal.cc (sigwait): Ensure cleanup in error conditions.
* sigproc.cc (sig_send): Clear packet mask storage.
(wait_subproc): Fill in child exit code in siginfo_t structure.
* thread.cc (pthread_kill): Set threadkill flag.
* tlsoffsets.h: Regenerate. Throughout, use siginfo_t to fill out all signal
information for "kernel" signals.
* cygtls.h (_threadinfo::set_siginfo): Declare new function.
* cygtls.cc (_threadinfo::set_siginfo): Define new function.
* dcrt0.cc (do_exit): Accommodate siginfo_t considerations.
* exceptions.cc (handle_exceptions): Ditto.
(sig_handle_tty_stop): Ditto.
(ctrl_c_handler): Use killsys() to send signal.
(sigpacket::process): Rename from sig_handle. Use siginfo_t field from
sigpacket for everything.
(tty_min::kill_pgrp): Accommodate siginfo_t considerations.
(fhandler_termios::bg_check): Ditto.
* fhandler_tty.cc (fhandler_tty_slave::ioctl): Use killsys() to send signal.
* signal.cc (kill_worker): Rewrite to use siginfo_t second argument.
(kill_pgrp): Ditto.
(kill0): Define new function pulled from kill().
(kill): Rewrite as frontend to kill0.
(killsys): Define new function.
* sigproc.cc (sigelem): Eliminate.
(sigpacket): Move to sigproc.h. Subsume sigelem.
(pending_signals): Use sigpacket rather than sigelem for everything.
(sig_clear): Ditto.
(wait_sig): Ditto.
(sig_send): Rewrite to use siginfo_t argument.
(sig_send): New function wratpper to sig_send with siginfo_t argument.
(wait_subproc): Accommodate siginfo_t considerations.
* thread.cc (pthread_kill): Ditto.
* sigproc.h (sigpacket): Move here.
(sigpacket::process): Declare "new" function.
(sig_handle): Eliminate declaration.
(sig_send): Declare with new paramaters.
(killsys): Declare new function.
(kill_pgrp): Declare.
* winsup.h: Move some signal-specific stuff to sigproc.h.
* include/cygwin/signal.h: Tweak some siginfo_t stuff.
* fhandler_console.cc (fhandler_console::close): Fix debugging output.
(fhandler_console::fixup_after_fork): Decrement open_fhs prior to call to
fhandler_console::open since this would cause incrementing too much
incrementing in child processes. (Probably needs to be handled more elegantly
someday)
(fhandler_console::fixup_after_exec): Ditto.
compiler bug.
* autoload.cc (TryEnterCriticalSection): Remove.
* dcrt0.cc (dll_crt0_0): Delete inappropriate setting of _my_tls.stackptr to
NULL since it has really bad consequences. Make 'si' an automatic variable.
* cygtls.cc (_threadinfo::init_thread): Correct thinko which caused thread list
to be allocated every time.
* cygtls.h (CYGTLS_PADSIZE): Define as const int.
* sync.h: Make multiple inclusion safe.
(muto::next): Eliminate.
(muto::exiting_thread): New variable.
(muto::set_exiting_thread): New function.
(new_muto): Change to use different section for mutos since c++ give
inexplicable warning in some cases otherwise.
(new_muto1): Ditto.
* dcrt0.cc (do_exit): Call muto::set_exiting_thread here.
* sync.cc (muto_start): Eliminate.
(muto::acquire): Always give exiting thread a lock. Never give thread a lock
if exiting.
(muto::release): Ditto for releasing.
* dtable.cc (dtable::init_lock): Unline function and define here.
* dtable.h (lock_cs): Define as a muto since critical sections seem to work
oddly on Windows Me.
(lock): Accommodate switch to muto.
(unlock): Ditto.
* exceptions.cc (setup_handler): Don't worry about acquiring mutos since that
hasn't mattered for a long time.
(signal_exit): Ditto: muto stuff will be handled automatically on exit now.
* Makefile.in (DLL_IMPORTS): Link advapi32 to ensure proper DLL initialization.
* autoload.cc (RegCloseKey): Arbitrarily choose this function as a "seed" to
pull the advapi32 link library in. So, comment out the autoloading.
* cygtls.cc (_threadinfo::init_thread): Just clear CYGTLS_PADSIZE.
(_threadinfo::remove): Add debugging.
(_threadinfo::find_tls): Ditto.
* cygtls.h (_threadinfo::padding): Make zero length (for now?).
* dcrt0.cc (dll_crt0_0): Move more initialization here from dll_crt0_1.
(dll_crt0_1): See above.
* dtable.h (dtable::lock): Remove commented out critical section locking.
* dtable.h (dtable::init_lock): Remove commented out critical section locking.
* dtable.h (dtable::unlock): Remove commented out critical section locking.
* exceptions.cc (interruptible): bool'ize.
* init.cc (threadfunc_fe): Revert to storing threadfunc at stack bottom.
(munge_threadfunc): Ditto. Avoid adding overhead to calibration_thread.
(prime_threads): Don't initialize tls stuff.
(dll_entry): Make minor change to initialization order.
* tlsoffsets.h: Regenerate.
* sigproc.cc (wait_sig): Add sanity check for end of process thread exit.
* select.h: Make minor formatting change.
* Makefile.in: Add still more -fomit-frame-pointer functions.
* dtable.h (dtable::lock): New function.
(dtable::unlock): New function.
(dtable::init_lock): New function.
* cygheap.h (HEAP_TLS): Declare new enum value.
(init_cygheap::threadlist): Declare new array.
(init_cygheap::sthreads): Declare new variable.
(cygheap_fdmanip::~cygheap_fdmanip): Use new dtable lock/unlock functions.
(cygheap_fdnew::cygheap_fdnew): Ditto.
(cygheap_fdget::cygheap_fdget): Ditto.
* dtable.cc (dtable_init): Initialize fdtab critical section.
(dtable::fixup_after_fork): Ditto.
(dtable::fixup_after_exec): Ditto.
(dtable::dup2): Use lock/unlock calls to protect access to fdtab.
(dtable::find_fifo): Ditto.
(dtable::fixup_before_fork): Ditto.
(dtable::fixup_before_exec): Ditto.
(dtable::set_file_pointers_for_exec): Ditto.
(dtable::vfork_child_dup): Ditto.
(dtable::vfork_parent_restore): Ditto.
* syscalls.cc (close_all_files): Ditto.
* sync.h (muto::acquired): Declare new function.
(new_muto1): Declare new macro used to specify name of muto storage.
* sync.cc (muto::acquired): Define new function.
* cygthread.cc (cygthread::stub): Remove signal chain removal call since it is
handled during initialization now.
* cygthread.cc (cygthread::simplestub): Remove signal chain removal call since
it is handled during initialization now.
* cygtls.cc (sentry): New class used for locking. Use throughout.
(_threadinfo::reset_exception): Don't pop stack.
(_threadinfo::find_tls): Move from exceptions.cc.
(_threadinfo::init_thread): Initialize array of threads rather than linked
list. Take second argument indicating thread function for this thread.
(_threadinfo::remove): Search thread array rather than linked list. Use sentry
to lock. Only unlock if we got the lock.
(_threadinfo::find_tls): Ditto for first two.
(handle_threadlist_exception): Handle exceptions when manipulating the thread
list in case of premature thread termination.
(_threadinfo::init_threadlist_exceptions): Ditto.
* cygtls.h (TLS_STACK_SIZE): Decrease size.
(_threadinfo::padding): Add element to avoid overwriting lower part of stack.
(_threadinfo::remove): Add a "wait" argument to control how long we wait for a
lock before removing.
* exceptions.cc (init_exception_handler): Make global. Take argument to
control exception handler being set.
(ctrl_c_handler): Wait forever when removing self from signal chain.
(_threadinfo::find_tls): Move to cygtls.cc.
(sig_handle): Reorganize detection for thread-specific signals.
* heap.cc (heap_init): Rework slightly. Make fatal error more verbose. Remove
malloc initialization since it can't happen during dll attach.
* init.cc (search_for): Move address to search for on stack here.
(threadfunc_ix): Ditto for stack offset. Make shared so that stack walk
potentially only has to be done once when cygwin processes are running.
(threadfunc_fe): Use standard tls to store thread function (may change back
later).
(calibration_thread): New function. Potentially called to find threadfunc_ix.
(munge_threadfunc): Search for "search_for" value on stack. Output warning
when thread func not found on stack. Use standard tls to store thread
function.
(prime_threads): New function. Called to prime thread front end.
(dll_entry): Call dll_crt0_0 here when DLL_PROCESS_ATTACH. Call prime_threads
here. Try to remove thread from signal list here.
* sigproc.cc (wait_sig): Initialize threadlist exception stuff here.
* thread.cc (pthread::exit): Pass argument to signal list remove function.
* thread.h: Remove obsolete *ResourceLock defines.
* tlsoffsets.h: Regenerate.
* winsup.h (spf): Define temporary debug macro to be deleted later.
* dcrt0.cc (dll_crt0_0): New function, called during DLL initialization.
Mainly consists of code pulled from dll_crt0_1.
(dll_crt0_1): See above.
(_dll_crt0): Wait for initial calibration thread to complete, if appropriate.
Move some stuff to dll_crt0_0.
(initialize_main_tls): Accommodate argument change to
_thread_info::init_thread.
* fork.cc (fork_child): Ditto.
(sync_with_child): Fix debug message.
* external.cc (cygwin_internal): Remove special considerations for
uninitialized dll since initialization happens during dll attach now.
* dlfcn.cc (dlopen): Remove obsolete *ResourceLock calls.
(dlclose): Ditto.
* cygheap.h (init_cygheap::close_ctty): Declare new function.
* cygheap.cc (init_cygheap::close_ctty): Define new function.
* syscalls.cc (close_all_files): Use close_ctty.
(setsid): Ditto.
* cygthread.cc (cygthread::stub): Remove exception initialization.
* cygthread.cc (cygthread::stub): Remove exception initialization.
(cygthread::simplestub): Ditto.
* thread.cc (pthread::thread_init_wrapper): Ditto.
* cygtls.cc (_last_thread): Make static.
(_threadinfo::call2): Initialize exception handler here.
(_threadinfo::find_tls): Move here.
* exceptions.cc (_threadinfo::find_tls): Move.
* dcrt0.cc (__api_fatal): Add prefix info to message here rather than including
it in every call to function.
* winsup.h (api_fatal): Accommodate above change.
* debug.cc (add_handle): Don't do anything if cygheap not around.
(mark_closed): Ditto.
* dll_init.cc (dll_list::detach): Fix debug output.
* fork.cc (sync_with_child): Ditto.
(vfork): Improve debug output.
* heap.cc (heap_init): Ditto.
* exceptions.cc (try_to_debug): Clarify message when debugger attaches.
and open_fhs_on_hold (back) here.
* dcrt0.cc (_dll_crt0): Just set impure_ptr_ptr here and let later
initialization deal with tls.
* dtable.cc (dtable::vfork_child_fixup): Move ctty considerations here.
(dtable:vfork_parent_restore): And here.
* fork.cc (vfork): Reflect change to ctty handling.
* perthread.h (vfork_save::fhctty): Eliminate.
* cygwin.din: Make more exports NOSIGFE that will never be interrupted by a
signal.
* init.cc (dll_entry): Set stackptr to NULL to catch problems earlier.
signal handlers. Reorganize to cause potential SEGV on stack overflow.
* sigproc.cc (no_signals_available): Check sendsig value rather than relying on
obsolete sig_loop_wait.
(sigproc_terminate): Ditto.
(proc_can_be_signalled): Check sendsig value even for myself.
* tlsoffsets.h: Regenerate.
this change throughout.
* dtable.cc (dtable::add_archetype): Use correct count when iterating through
*active* archetypes.
* dtable.cc (dtable::fixup_after_exec): Close handle if close_on_exec and
archetype exists since archetype currently does not set windows close-on-exec
flag (FIXME).
* fhandler_tty.cc (fhandler_tty_slave::open): Change debugging output slightly.
(fhandler_tty_slave::close): Ditto.
(fhandler_tty_slave::fixup_after_fork): Just report on inherited use counts
since since archetype currently does not set windows close-on-exec flag
(FIXME).
* pinfo.cc (_pinfo::set_ctty): Change debugging output slightly.
* cygheap.cc (cygheap_init): Remove open_fhs accommodation and use count
reporting.
* perthread.h (vfork_save::fhctty): New element.
* perthread.h (vfork_save::open_fhs): New element.
* fork.cc (vfork): Muck around with ctty and open_fhs stuff, both of which are
now saved in the vfork_save structure.
(report_tty_counts): New macro. Use throughout for reporting tty use counts.
* dtable.cc (dtable::vfork_child_dup): Add debugging output for usecount
increment. Increment open_fhs if appropriate.
(dtable::vfork_parent_restore): "Close" artificially bumped ctty.
(dtable::vfork_child_fixup): Close ctty since it was bumped prior to vfork.
Save open_fhs around close since the closing of these handles has no effect on
the console.
* fhandler_tty.cc (fhandler_tty_slave::open): Reorganize calls to allow for
easier tracking of usecount modification.
(fhandler_tty_slave::open): Ditto.
(fhandler_tty_master::fixup_after_exec): Ditto.
* fhandler_tty.cc (fhandler_tty_master::init): Fix so that children do not
inherit master tty handles.
(fhandler_tty_master::fixup_after_fork): Remove, since it was never used.
(fhandler_tty_master::fixup_after_exec): Ditto.
* pinfo.cc (_pinfo::set_ctty): Increment open_fhs when ctty is set.
* cygheap.cc (cygheap_init): Ditto.
* syscalls.cc (setsid): *Always* call close on opened ctty since the archetype
is associated with the ctty and it counts as an opened handle.
* tty.cc (tty::common_init): Don't protect input/output mutex since it confuses
subsequent fork/execs when CYGWIN=tty.
environment variable after error_start detected.
* fhandler_tty_slave.cc (fhandler_tty_slave::close): Clarify debug message.
* syscalls.cc (setsid): Don't increment usecount here, since it will be
automatically decremented on close.
(__cygwin_user_data::impure_ptr): Ditto.
(_dll_crt0): Reluctantly initialize _impure_ptr here.
(initialize_main_tls): Eliminate local_clib initialization since it now happens
in init_thread.
* init.cc (dll_entry): Reluctantly remove code which set _impure_ptr to the
main thread's local_clib.
* perthread.h (reent_data): Remove obsolete declaration.
* sigproc.cc (proc_subproc): Add more debugging output.
(get_proc_lock): Ditto.
*dcrt0.cc (dll_crt0_1): Allocate argv[0] via malloc since main thread could
exit.
calculated mask in debugging output.
* sigproc.h (set_signal_mask): Reflect above change in declaration.
* path.cc (mount_item::build_win32): Take path apart before feeding it to
fnmunge. Throughout, change use of _reent_winsup()-> to _my_tls.locals.
instead. Throughout, remove obsolete MT_SAFE/_CYG_THREAD_FAILSAFE
considerations. Througout, add cygtls.h include.
* Makefile.in (DLL_OFILES): Add cygtls.o. Add some more objects to the
-fomit-frame-pointer list.
* acconfig.h: Remove obsolete settings.
* config.h.in: Ditto.
* bsdlib.cc: Add cygtls.h include.
* configure.in: Remove --enable-extra-threadsafe-checking.
* configure: Regenerate.
* cygtls.h (_local_storage): New struct renamed from _winsup_t (sic).
(_threadinfo:local_clib): Add new field.
(_threadinfo::locals): Ditto.
(_threadinfo::init_thread): Accept second _reent * argument.
(_threadinfo::call): Define as regparm.
(CYGTLS_PADSIZE): Remove unnecessary slop.
(_getreent): Define as a macro.
* thread.h: Remove _CYG_THREAD_FAILSAFE and MT_SAFE stuff.
(_winsup_t): Move to cygtls.h.
(ResourceLocks::ResourceLocks): Eliminate empty constructor.
(MTinterface::reents): Eliminate.
(MTinterface::thread_self_key): Eliminate.
(MTinterface::MTinterface): Eliminate.
* dcrt0.cc: Include stdio.h for _impure_ptr initialization.
(do_global_ctors): Remove run_ctors_p (sic) considerations. Don't call atexit
here.
(__main): Initialize destructors for user here.
(dll_crt0_1): Accept a dummy argument. Don't call init_thread here. Don't set
_impure_ptr here. Call do_global_ctors after more things have been
initialized.
(_dll_crt0): Define zeros buffer as max of needed size of CYGTLS_PADSIZE so
that it can be used for two purposes while minimizing stack usage. Initialize
_impure_ptr specifically, for speed. Call dll_crt0_1 with buffer argument.
(cygwin_dll_init): Call dll_crt0_1 with dummy argument.
* dtable.cc (dtable::find_unused_handle): Remove call to AssertResourceOwner.
* exceptions.cc: Move _threadinfo stuff to new file.
* cygtls.cc: New file.
* gentls_offsets: Accommodate increasing complexity of cygtls.h.
* hires.h (hires_base::~hires_base): Remove.
* init.cc (dll_entry): Remove setting of reents.
* thread.cc: Remove syslog.h include.
(__getreent): Simplify to use _my_tls.
(_reent_winsup): Delete.
(AssertResourceOwner): Delete.
(MTinterface::Init): Remove setting of _clib and _winsup, with all that
entails.
(MTinterface::fixup_after_fork): Ditto.
(pthread::thread_init_wrapper): Ditto. Also remove call to
set_tls_self_pointer.
(pthread::set_tls_self_pointer): Eliminate.
(pthread::get_tls_self_pointer): Just return _my_tls.tid;
(__reent_t::init_clib): Eliminate.
* tlsoffsets.h: Regenerate.
getsigmask.
* fhandler.h (fhandler_base): Make friends with close_all_files.
* pinfo.cc (_pinfo::set_ctty): Add more debugging.
* sigproc.cc (proc_can_be_signalled): Detect state when signal handler thread
is gone in target process as an EPERM situation. Set errno to ESRCH if process
doesn't exist.
(sigproc_terminate): Set sendsig to illegal value when closed.
(sig_send): Rely on proc_can_be_signalled setting the proper errno.
* syscalls.cc (close_all_files): Detect when all ttys are closed prior to
calling close_all_files. The ctty needs to be closed explicitly in this case.
* syscalls.cc (access_worker): Accommodate extra fhandler_base argument. Use
it instead of stat_worker to determine stat information, when appropriate.
* fhandler.cc (fhandler_base::device_access_denied): Pass fhandler pointer to
access_worker so that it can use the proper method for determining stat
information.
* fhandler_disk_file.cc (fhandler_disk_file::opendir): Ditto.
cygthread::stub2. Just return from function now since ExitThread is guaranteed
by automatic _threadinfo wrapper. Define as per ThreadProc convention.
(cygthread::stub2): Remove.
(cygthread::simplestub): Perform similar operations to cygthread::stub.
(cygthread::simplestub2): Remove.
* cygthread.h (cygthread::stub): Declare as per ThreadProc convention.
(cygthread::stub2): Remove declaration.
(cygthread::simplestub): Declare as per ThreadProc convention.
(cygthread::simplestub2): Remove declaration.
* cygtls.h (_threadinfo::call): Define first argument as per ThreadProc
convention.
(_threadinfo::call2): Ditto.
(_tlsbase): Define as char * pointer.
(_tlstop): New definition.
(_main_tls): Define here.
* dcrt0.cc (alloc_stack): Revert previous change which called init_thread since
information would be overwritten by fork later anyway.
(dll_crt0_1): Use _tlsbase and _tlstop for setting stack bottom, top.
* exceptions.cc: Move _main_tls declaration to cygtls.h.
(_threadinfo::call): Define first argument as per ThreadProc convention.
(_threadinfo::call2): Call ExitThread with thread function return value.
(_threadinfo::init_thread): Don't initialize cygtls to zero if input arg is
NULL.
* fork.cc (fork_child): Reset _main_tls here. Reinitialize parts of _my_tls
after copying data from parent.
* init.cc (threadfunc_fe): New function. Front-end for all threads created in
cygwin processes.
(munge_threadfunc): New function.
(dll_entry): Call munge_threadfunc to force the call of a thread wrapper.
* thread.cc (pthread::thread_init_wrapper): Perform similar operations to
cygthread::stub.
(pthread::thread_init_wrapper2): Remove.
* thread.h (pthread::thread_init_wrapper): Declare as per ThreadProc
convention.
(pthread::thread_init_wrapper2): Remove declaration.
* window.cc (Winmain): Just return from function now since ExitThread is
guaranteed by automatic _threadinfo wrapper.
(dtable::release): Move archetype deletion here.
(dtable::vfork_child_dup): Increment ctty usecount to catch later
close_all_files case in parent/child.
(dtable::vfork_child_fixup): Avoid using cygheap->foo where this should really
be using local references. Call close on archetyped handles since the handles
haven't had the noninherit flag set.
* fhandler_tty.cc (fhandler_tty_slave::close): Remove archetype deletion code.
Add defensive error message when DEBUGGING.
(fhandler_tty_common::set_close_on_exec): Use more robust method for checking
whether to set handles into noninherit if there is an archetype associated with
the fhandler.
(init_cheap::ctty): Change to pointer.
* dtable.h (dtable::find_archetype): Declare new function.
(dtable::add_archetype): Declare new function.
(dtable::delete_archetype): Declare new function.
(dtable::narchetypes): Declare.
(dtable::farchetypes): Declare.
(dtable::initial_archetype_size): Declare.
(dtable::dtable): Initialize new fields.
(dtable::initial_archetype_size): Declare.
* dtable.cc (dtable::find_archetype): Define new function.
(dtable::add_archetype): Define new function.
(dtable::delete_archetype): Define new function.
(dtable::initial_archetype_size): Define.
* fhandler.h (fhandler_base::archetype): Declare.
(fhandler_base::usecount): Declare.
* fhandler.cc (fhandler_base::fhandler_base): Initialize new fields.
* fhandler_console.cc (fhandler_console::get_tty_stuff): Pass NULL to third
argument of set_ctty.
* fhandler_tty.cc (fhandler_tty_slave::open): Accommodate new archetype method
to create only one instance of a tty.
(fhandler_tty_slave::close): Don't close handles unless archetype usecount is
zero. When that happens, close archetype too.
(fhandler_tty_slave::dup): Just copy archetype. Set use count appropriately.
Set ctty, if appropriate.
(fhandler_tty_common::dup): Remove slave considerations.
(fhandler_tty_common::set_close_on_exec): Remove cygheap->ctty considerations.
* pinfo.cc (_pinfo::set_ctty): Accommodate new archetype methods.
* pinfo.h (_pinfo::set_ctty): Make third argument explicit.
* syscalls.cc (close_all_files): Decrement controlling tty use count before
closing all handles to allow controlling tty to be closed. Remove previous
controlling tty considerations.
if duping the current ctty.
(fhandler_tty_common::close): Move debugging statement earlier in function.
(fhandler_tty_slave::close): Return success when closing ctty.
* syscalls.cc (close_all_files): Avoid calling fhandler_tty_slave close method
so that open_fhs will not be decremented when closing cygheap ctty.
(setsid): Ditto.
* dcrt0.cc (do_exit): Reorganize to avoid leaving a critical section active
after vfork.
* fhandler.h (fhandler_tty_slave::get_unit): Remove regparm parameter since it
can't work in a virtualized function.
guaranteed to be accurate.
* fhandler_tty.cc (fhandler_tty_slave::open): Increment open_fhs appropriate
when copying ctty.
(fhandler_tty_slave::close): Remove special case handling for exit_state. Use
ctty < 0 check instead.
(fhandler_tty_common::close): Set io_handle to NULL after closing.
* syscalls.cc (close_all_files): Specifically close cygheap->ctty, if
appropriate.
throughout.
* tty.cc (tty::common_init): Remove call to SetKernelObjectSecurity and edit
some comments.
* cygheap.h (init_cygheap::ctty): Add new element.
* devices.in (device::parse): Remove special handling for /dev/tty.
* devices.cc: Regenerate.
* dtable.cc (build_fh_pc): Don't reset /dev/tty device. Let the device opener
do that.
* fhandler_termios.cc (tty_min::set_ctty): Redefine to _pinfo class.
* fhandler_tty.cc (fhandler_tty_common::set_close_on_exec): Avoid setting
noninherit flag for ctty.
* tty.h: Move BOOLs to bools.
(tty_min::set_ctty): Redeclare to _pinfo class.
* pinfo.cc (_pinfo::set_ctty): Define new function based on tty_min::set_ctty.
Change first argument from tty number to tty_min class.
* pinfo.h (_pinfo::set_ctty): Declare.
* fhandler_console.cc (fhandler_console::get_tty_stuff): Reflect move of
set_ctty to _pinfo class.
* fhandler_tty.cc (fhandler_tty_slave::open): Treat FH_TTY specially. Use
saved cygheap value if it exists. Otherwise convert to real device and save on
first time open.
(fhandler_tty_common::dup): Potentially set controlling tty if duping a slave
tty.
* syscalls.cc (setsid): Close controlling tty in cygheap.
* tty.cc: Change some BOOLs to bools.
(_threadinfo::init_thread): Rename from 'init'.
(_threadinfo::init): Declare new function.
(_threadinfo::protect_linked_list): Declare new critical section.
* dcrt0.cc (dll_crt0_1): Call init_thread to initialize thread stuff.
(_dll_crt0): Call _threadinfo::init prior to invoking dll_crt0_1.
* exceptions.cc (_threadinfo::init_thread): Rename from 'init'.
(_threadinfo::init): Define new function. Protect linked list manipulation
with new critical section.
(_threadinfo::call): Reflect function name change.
(_threadinfo::remove): Protect linked list manipulation with new critical
section
* gentls_offsets: Rework to allow multi-line "don't parse this" protection.
* init.cc (dll_entry): Don't remove threads info stuff here since the remove
function uses a critical section which can't be used during thread creation or
destruction.
* thread.cc (pthread::exit): Call _threadinfo remove function here.
monitored by signals since this thread will never call raise or sigwait.
(cygthread::simplestub2): Ditto. Set ev here.
(cygthread::cygthread): Don't set ev here for freerange thread.
List_insert call.
(pthread::prepare): Ensure race safeness when adding function
pointers to atfork lists by using List_insert.
* thread.h (List_insert): Use InterlockedCompareExchangePointer to
ensure race safeness without using a mutex.
(List_remove): Use InterlockedCompareExchangePointer to
ensure race safeness with List_insert.
(List::insert): Remove mx parameter for List_insert call.
(NEW_FUNCTIONS): Add fcntl64.
* cygwin.din: Export fcntl64. Make fcntl being SIGFE.
* fcntl.cc (fcntl_worker): New function.
(fcntl64): New function.
(_fcntl): Call fcntl_worker. Convert 32 bit flock structure into
64 bit flock structure and vice versa.
* fhandler.cc (fhandler_base::lock): Change 2nd parameter to
struct __flock64 *.
* fhandler_disk_file.cc (fhandler_disk_file::lock): Ditto. Rework
to be 64 bit aware.
* fhandler.h: Accomodate above method argument changes.
* include/cygwin/types.h: Add struct __flock32 and __flock64.
Define struct flock according to setting of __CYGWIN_USE_BIG_TYPES__.
* include/cygwin/version.h: Bump API minor number.
privilege when building the name string.
(open_shared): Remove the call to OpenFileMapping.
(shared_info::initialize): Move cygheap initialization to ...
(memory_init): ... here. Suppress now useless shared_h variable.
(user_shared_initialize): Make tu a cygpsid.
* cygwin.din: Export flock.
* flock.c: New file.
* include/sys/file.h: Include sys/cdefs.h.
Add function prototype for flock().
Add some comments from BSD's header for further clarity.
(L_SET, L_CURR, L_INCR, L_XTND): Redefine as the macros
SEEK_SET, SEEK_CUR, SEEK_CUR, & SEEK_END respectively.
(LOCK_SH,LOCK_EX,LOCK_NB,LOCK_UN): New macros for flock().
* include/cygwin/version.h: Bump API minor number.
* exceptions.cc: Ditto.
* fhandler_termios.cc: Ditto.
* signal.cc: Ditto.
* sigproc.cc: Ditto.
* Makefile.in: Revert previous change which made a cygwin.din newer than a
version.h a warning rather than an error.
* Makefile.in (DLL_OFILES): Add sigfe.o. Remove reliance on cygwin.def from
cygwin0.dll dependency since dependence on sigfe.o implies that. Generate def
file on the fly using 'gendef'.
* configure.in: Don't auto-generate cygwin.def.
* configure: Regenerate.
* cygwin.din: Add SIGFE stuff where appropriate.
* dcrt0.cc (dll_crt0_1): Initialize cygwin tls early in process startup. Set
_main_tls to address of the main thread's cygwin tls.
* debug.h: Remove now unneeded WFSO and WFMO declarations.
* exceptions.cc (_last_thread): Define.
(set_thread_state_for_signals): New function.
(reset_thread_exception_for_signals): Ditto.
(init_thread_for_signals): Ditto.
(delete_thread_for_signals): Ditto.
(capture_thread_for_signals): Ditto.
(handle_exceptions): Set return address explicitly for exceptions prior to
calling sig_send.
(interrupt_on_return): Eliminate.
(setup_handler): Add preliminary implementation for dealing with
thread-specific signals by querying _main_tls.
(signal_exit): Use cygthread::main_thread_id instead of mainthread.id.
(call_signal_handler_now): For now, just handle the main thread.
* fork.cc (vfork): Save and restore main _my_tls.
* gendef: New file. Generates def file and sigfe.s file.
* gentls_offsets: New file. Generates offsets for perl to use in sigfe.s.
* how-signals-work.txt: Mention that info is obsolete.
* init.cc (dll_entry): Initialize cygwin tls storage here.
* miscfuncs.cc (low_priority_sleep): Make a C function for easier calling from
asm.
* perthread.h (vfork_save::tls): New element.
* signal.cc (nanosleep): Replace previous use of
sigframe.call_signal_handler_now with straight call to call_signal_handler_now.
(abort): Ditto.
* syscalls.cc (readv): Ditto.
* termios.cc (tcsetattr): Ditto.
* wait.cc (wait4): Ditto.
* sigproc.cc (sig_dispatch_pending): Ditto.
(sig_send): Ditto.
* sigproc.h: Declare call_signal_handler_now.
* thread.cc (pthread::thread_init_wrapper): Initialize cygwin tls. Remove
obsolete and unworking signal stuff.
* thread.h (verifyable_object::sigs): Eliminate.
(verifyable_object::sigmask): Eliminate.
(verifyable_object::sigtodo): Eliminate.
(verifyable_object::exit): Make attribute noreturn.
(verifyable_object::thread_init_wrapper): Ditto.
(pthread_null::exit): Ditto.
* winbase.h (__stackbase): Always define.
* winsup.h (low_priority_sleep): Declare as a "C" function.
* include/cygwin/version.h: Bump API version to reflect sigwait export.
* include/sys/queue.h: Protect SLIST_ENTRY from previous declaration.
* signal.cc (sigwait): Implement.
* select.cc (fhandler_base::ready_for_read): Add debugging output.
* devices.h: Define more device pointers via their storage.
* devices.in: Don't parse things like /dev/inet/tcp, as they really have no
meaning.
* devices.cc: Regenerate.
* gendevices: Set proper protection for output file.
* cygtls.h: New file.
* gendef: New file.
* gentls_offsets: New file.
* tlsoffsets.h: New file. Autogenerated.
* config/i386/longjmp.c: Remove. File subsumed by gendef output.
* config/i386/makefrag: Remove obsolete file.
* fhandler.cc: Remove spurious access_worker declaration.
* spawn.cc (spawnve): Make debugging output more accurate.
* cygwin-gperf: Remove.
* devices.cc: Remove.
set_security_attribute appropriately.
* external.cc (cygwin_internal): Ditto.
* fhandler.cc (fhandler_base::open): Ditto.
* fhandler_socket.cc (fhandler_socket::bind): Ditto.
* path.cc (symlink_worker): Ditto.
* sec_acl.cc (setacl): Ditto. Call read_sd appropriately.
(getace): Ditto.
* sec_helper.cc (security_descriptor::malloc): New method.
(security_descriptor::realloc): New method.
(security_descriptor::free): New method.
* security.cc (read_sd): Get security_descriptor as parameter instead
of PSECURITY_DESCRIPTOR and a size. Drop unnecessary parameter check.
Allocate the security_descriptor buffer according to size returned by
a call to GetFileSecurity. Return buffer size on success.
(write_sd): Get security_descriptor as parameter instead of
PSECURITY_DESCRIPTOR and a size.
(get_nt_attribute): Use local security_descriptor.
(get_nt_object_attribute): Ditto in case of type == SE_REGISTRY_KEY.
Allocate security_descriptor buffer according to size returned by
a call to RegGetKeySecurity.
(alloc_sd): Make static. Get security_descriptor as parameter instead
of PSECURITY_DESCRIPTOR and a size. Drop unnecessary parameter check.
(set_security_attribute): Get security_descriptor as parameter instead
of PSECURITY_DESCRIPTOR and a size.
(set_nt_attribute): Use local security_descriptor.
(check_file_access): Ditto.
* security.h: Add class security_descriptor.
(read_sd): Change declaration to get security_descriptor as parameter
instead of PSECURITY_DESCRIPTOR and a size.
(write_sd): Ditto.
(set_security_attribute): Ditto.
(alloc_sd): Remove declaration.
* thread.cc (semaphore::semaphore): Use local security_descriptor. Call
set_security_attribute appropriately.
(sig_send): Improve debugging output. Wait for pipe to be created before
trying to send to it. Call call_signal_handler_now if sending a signal to
myself.
CYGSERVER_REQUEST_MSG and CYGSERVER_REQUEST_SEM.
(admininstrator_group_sid): Add extern declaration.
* cygserver_ipc.h: Rewrite.
* cygserver_msg.h: New file.
* cygserver_sem.h: New file.
* cygserver_shm.h: More or less rewrite.
* cygwin.din: Add msgctl, msgget, msgrcv, msgsnd, semctl, semget and
semop.
* msg.cc: Rewrite.
* safe_memory.h: Remove.
* sem.cc: Rewrite.
* shm.cc: Rewrite.
* include/cygwin/ipc.h: Use appropriate guard.
(struct ipc_perm): Add seq.
(IPCID_TO_IX): New define from BSD.
(IPCID_TO_SEQ): Ditto.
(IXSEQ_TO_IPCID): Ditto.
(IPC_R): Ditto.
(IPC_W): Ditto.
(IPC_M): Ditto.
* include/cygwin/msg.h: Use appropriate guard. #ifdef _KERNEL all stuff
not explicitely defined by SUSv3. Use signed types in structs to match
types used in BSD.
(msgqnum_t): Define unsigned.
(msglen_t): Ditto.
(struct msqid_ds): Add msg_first and msg_last.
(struct msginfo): Remove msgpool. Add msgssz and msgseg.
* include/cygwin/sem.h: Use appropriate guard. #ifdef _KERNEL all stuff
not explicitely defined by SUSv3. Use signed types in structs to match
types used in BSD.
(SEM_UNDO): Define appropriately.
(struct semid_ds): Add sem_base.
(struct seminfo): Add semmap and semusz.
(SEM_A): New define from BSD.
(SEM_R): Ditto.
(SEM_ALLOC): Ditto.
(union semun): Define.
* include/cygwin/shm.h: Use appropriate guard. #ifdef _KERNEL all stuff
not explicitely defined by SUSv3. Use signed types in structs to match
types used in BSD.
(SHMLBA): Define using cygwin_internal(CW_GET_SHMLBA) call.
(struct shmid_ds): Add shm_internal.
(struct shm_info): Rename shm_ids to used_ids as in BSD. Add define
for shm_ids.
* include/cygwin/sysproto.h: New file.
* include/cygwin/version.h: Bump API minor number.
* include/sys/ipc.h: New file.
* include/sys/msg.h: New file.
* include/sys/queue.h: New file from BSD.
* include/sys/sem.h: New file.
* include/sys/shm.h: New file.
* include/sys/sysproto.h: New file.
CW_GET_GID_FROM_SID handling.
* include/cygwin/version.h: Bump API minor number.
* include/sys/cygwin.h (cygwin_getinfo_types): Add
CW_GET_UID_FROM_SID and CW_GET_GID_FROM_SID.
h as h would be NULL at this point.
(cygthread::operator new): Issue debugging info when overflowing the thread
pool.
(cygthread::cygthread): Set ev from h here after h has been initialized.
* pthread.cc (+mangle_sem_name): New function.
(sem_open): Ditto.
(sem_close: Ditto.
(sem_timedwait): Ditto.
(sem_getvalue): Ditto.
* thread.cc (semaphore::semaphore): Rearrange member initialization.
Use appropriate security attribute for process shared semaphores.
(semaphore::semaphore): New constructor for named semaphores.
(semaphore::~semaphore): Care for semaphore name.
(semaphore::_post): Accomodate failing ReleaseSemaphore. Use value
returned by ReleaseSemaphore vor currentvalue.
(semaphore::_getvalue): New method.
(semaphore::_timedwait): Ditto.
(semaphore::_fixup_after_fork): Rearrange. Don't fail for process
shared semaphores.
(semaphore::open): New method.
(semaphore::timedwait): Ditto.
(semaphore::post): Fix return value. Set errno appropriately.
(semaphore::getvalue): New method.
* thread.h (class semaphore): Add prototypes for open, getvalue,
timedwait, _getvalue, _timedwait. Add prototypes for new constructor.
Add name member.
* include/semaphore.h: Add prototypes for sem_open, sem_close,
sem_timedwait and sem_getvalue.
include/cygwin/version.h: Bump API minor number.
Rename pthread_key::save_key_to_buffer to
pthread_key::_fixup_before_fork throughout.
Rename pthread_key::recreate_key_from_buffer to
pthread_key::_fixup_after_fork throughout.
* thread.cc (native_mutex::init): Remove.
(native_mutex::lock): Ditto.
(native_mutex::unlock): Ditto.
(pthread::push_cleanup_handler): InterlockedExchangePointer
is not needed here.
(pthread_rwlock::pthread_rwlock): Initialize readers list mutex.
(pthread_rwlock::add_reader): Add reader via List_insert.
(pthread_rwlock::lookup_reader): Lock list while walking through.
(pthread_cond::init): Locking the init mutex is now void.
(pthread_rwlock::init): Ditto.
(pthread_mutex::init): Ditto.
* thread.h: Include security.h.
(fast_mutex): New class. Replacement for native_mutex.
(List_insert): New template function.
(List_remove): Ditto.
(List::List): Initialize synchronising mutex.
(List::fixup_after_fork): New method.
(List::insert): Add node via List_insert.
(List::remove): Remove node via List_remove.
(List::pop): Remove.
(List::for_each): Lock list while walking through.
(List::mx_init): New method.
(pthread_mutex::fixup_after_fork): Fixup mutex list after fork.
(pthread::fixup_after_fork): Ditto.
(pthread_conds::fixup_after_fork): Ditto.
(pthread_rwlock::fixup_after_fork): Ditto.
(semaphore::fixup_after_fork): Ditto.
(pthread_rwlock::readers_mx): New member.
* cygserver.h: Moved from include/cygwin to here.
* cygserver_ipc.h: Moved from ../cygserver to here.
* cygserver_shm.h: Ditto.
* cygwin.din: Add shmat, shmctl, shmdt and shmget.
* fhandler_tty.cc (fhandler_tty_slave::open): Don't warn about handle
dup'ing if not build with USE_SERVER.
* shm.cc: Include cygerrno.h unconditionally.
(shmat): Set errno to ENOSYS and return -1 if not build with
USE_SERVER.
(shmctl): Ditto.
(shmdt): Ditto.
(shmget): Ditto.
* woutsup.h: Remove.
* include/cygwin/cygserver_process.h: Moved to ../cygserver directory.
* include/cygwin/cygserver_transport.h: Ditto.
* include/cygwin/cygserver_transport_pipes.h: Ditto.
* include/cygwin/cygserver_transport_sockets.h: Ditto.
* include/cygwin/version.h: Bump API minor number.
* syscalls.cc (seteuid32): Always construct a default DACL including
the new sid, Admins and SYSTEM and copy it to the new thread token.
* security.cc (create_token): Use a NULL default DACL in NtCreateToken.
CTRL_LOGOFF_EVENT to processes running in invisible Windows Stations.
* window.cc (has_visible_window_station): New function.
* winsup.h: Add declaration for has_visible_window_station.
* child_info.h: YA update of another magic number.
* gendevices: New file.
* devices.in: New file.
* devices.cc: Regenerate.
* devices.shilka: Remove.
* devices.h: Correctly define device pointers.
(device): Remove now obsolete fields.
(device::native): Renamed from device::fmt.
* dtable.cc (build_fh_dev): Simplify in light of new unit parsing scheme.
(build_fh_pc): Ditto.
* path.cc (win32_device_name): Ditto.
* fhandler.h (fhandler_base::get_native_name): Reflect renaming of fmt to
native.
* fhandler_tty.cc (fhandler_tty_mster::init): Initialize slave device prior to
reporting unit.
* devices.shilka (device::parse): Restore check for tty in unit handling, but
without the previous typo.
* devices.cc: Regenerate.
* devices.h (DEV_CYGDRIVE_MAJOR): Change major number to one used by linux for
"user-mode virtual block device".
* device.shilka: Remove /dev/hd device entries, rename all device_hd*
to device_sd*.
(device::parse): Disallow units outside lower and upper bounds.
* dtable.cc (build_fh_pc): Fix typo of FH_UDP.
* path.cc (win32_device_name): Fix win32 name creation to match new
device handling.
* wincap.h (wincaps::is_server): New flag.
(wincapc::version): Change type to OSVERSIONINFOEX.
(wincapc::is_server): New function.
* wincap.cc (wincap_unknown::is_server): New initializer.
(wincap_95): Ditto.
(wincap_95osr2): Ditto.
(wincap_98): Ditto.
(wincap_me): Ditto.
(wincap_nt3): Ditto.
(wincap_nt4): Ditto.
(wincap_nt4sp4): Ditto.
(wincap_2000): Ditto.
(wincap_xp): Ditto.
(wincapc::init): Adapt to OSVERSIONINFOEX. Add detection of NT server systems.
* sched.cc: Include windows.h and registry.h.
(sched_rr_get_interval): Re-implement for NT systems.
CTRL and ALT keys at the time of the last keyboard input event.
(fhandler_console::ioctl): Handle requests to retrieve the keyboard modifiers
via the TIOCLINUX command.
* fhandler_tty.c (fhandler_tty_slave::read): Ditto.
* include/sys/termios.h (TIOCLINUX): New macro definition.
* pinfo.cc (pinfo::init): Do not give FILE_MAP_WRITE access to Everybody.
* exceptions.cc (sig_handle_tty_stop): Do not create pinfo parent with
PID_MAP_WRITE.
* fhandler_process.cc (fhandler_process::fill_filebuf): Ditto for pinfo p.
* signal.cc (kill_worker): Ditto for pinfo dest.
* uinfo.cc (cygheap_user::init): Make sure the current user appears
in the default DACL. Rearrange to decrease the indentation levels.
Initialize the effec_cygsid directly.
(internal_getlogin): Do not reinitialize myself->gid. Open the process
token with the required access.
* cygheap.h (class cygheap_user): Delete members pid and saved_psid.
Create members effec_cygsid and saved_cygsid.
(cygheap_user::set_sid): Define inline.
(cygheap_user::set_saved_sid): Ditto.
(cygheap_user::sid): Modify.
(cygheap_user::saved_sid): Modify.
* cygheap.cc (cygheap_user::set_sid): Delete.
(cygheap_user::set_saved_sid): Ditto.
* sec_helper.cc (sec_acl): Set the correct acl size.
* autoload.cc (FindFirstFreeAce): Add.
* security.h: Define ACL_DEFAULT_SIZE.
* shared_info.h: Update CURR_USER_MAGIC, CURR_SHARED_MAGIC and
SHARED_INFO_CB.
(mount_info::cb): Delete.
(mount_info::version): Delete.
(shared_info::delqueue): Delete.
* Makefile.in: Do magic for USER_MAGIC, class user_info, instead
of for mount_info.
* sigproc.cc (sigpacket): New structure.
(sig_send): Fill out sigpacket structure to send to signal thread rather than
racily sending separate packets.
(wait_sig): Use sigpacket structure to receive info from signal sender.
* devices.gperf: New file.
* devices.shilka: New file.
* cygwin-gperf: New file.
* cygwin-shilka: New file.
* fhandler_fifo.cc: New file.
* fhandler_nodevice.cc : New file. Reorganize headers so that path.h precedes
fhandler.h throughout. Remove device argument and unit arguments from fhandler
constructors throughout. Remove pc arguments to fhandler functions and use
internal pc element instead, throughout. Use dev element in pc throughout.
Use major/minor elements rather than units and device numbers previously in
fhandler class. Use correct methods for fhandler file names rather than
directly accessing file name variables, throughout.
* Makefile.in (DLL_OFILES): Add devices.o, fhandler_fifo.o
* dcrt0.cc (dll_crt0_1): Call device::init.
* devices.h: Renumber devices based on more Linux-like major/minor numbers.
Add more devices. Declare standard device storage.
(device): Declare struct.
* dir.cc (opendir): Use new 'build_fh_name' to construct a fhandler_* type.
* dtable.cc (dtable::get_debugger_info): Ditto.
(cygwin_attach_handle_to_fd): Ditto.
(dtable::release): Remove special FH_SOCKET case in favor of generic
"need_fixup_before" test.
(dtable::init_std_file_from_handle): Use either build_fh_dev or build_fh_name
to build standard fhandler.
(dtable::build_fh_name): Renamed from dtable::build_fhandler_from_name. Move
out of dtable class. Don't accept a path_conv argument. Just build it here
and pass it to:
(build_fh_pc): Renamed from dtable::build_fhandler. Move out of dtable class.
Use intrinsic device type in path_conv to create new fhandler.
(build_fh_dev): Renamed from dtable::build_fhandler. Move out of dtable class.
Simplify arguments to just take new 'device' type and a name. Just return
pointer to fhandler rather than trying to insert into dtable.
(dtable::dup_worker): Accommodate above build_fh name changes.
(dtable::find_fifo): New (currently broken) function.
(handle_to_fn): Use strechr for efficiency.
* dtable.h: Reflect above build_fh name changes and argument differences.
(fhandler_base *&operator []): Return self rather than copy of self.
* fhandler.cc (fhandler_base::operator =): Use pc element to set normalized
path.
(fhandler_base::set_name): Ditto.
(fhandler_base::raw_read): Use method to access name.
(fhandler_base::write): Correctly use get_output_handle rather than get_handle.
(handler_base::device_access_denied): New function.
(fhandler_base::open): Eliminate pc argument and use pc element of
fhandler_base throughout.
(fhandler_base::fstat): Detect if device is based in filesystem and use
fstat_fs to calculate stat, if so.
(fhandler_base::fhandler_base): Eliminate handling of file names and, instead,
just free appropriate component from pc.
(fhandler_base::opendir): Remove path_conv parameter.
* fhandler.h: Remove all device flags.
(fhandler_base::pc): New element.
(fhandler_base::set_name): Change argument to path_conv.
(fhandler_base::error): New function.
(fhandler_base::exists): New function.
(fhandler_base::pc_binmode): New function.
(fhandler_base::dev): New function.
(fhandler_base::open_fs): New function.
(fhandler_base::fstat_fs): New function.
(fhandler_base::fstat_by_name): New function.
(fhandler_base::fstat_by_handle): New function.
(fhandler_base::isfifo): New function.
(fhandler_base::is_slow): New function.
(fhandler_base::is_auto_device): New function.
(fhandler_base::is_fs_special): New function.
(fhandler_base::device_access_denied): New function.
(fhandler_base::operator DWORD&): New operator.
(fhandler_base::get_name): Return normalized path from pc.
(fhandler_base::get_win32_name): Return windows path from pc.
(fhandler_base::isdevice): Renamed from is_device.
(fhandler_base::get_native_name): Return device format.
(fhandler_fifo): New class.
(fhandler_nodevice): New class.
(select_stuff::device_specific): Remove array.
(select_stuff::device_specific_pipe): New class element.
(select_stuff::device_specific_socket): New class element.
(select_stuff::device_specific_serial): New class element.
(select_stuff::select_stuff): Initialize new elements.
* fhandler_disk_file.cc (fhandler_base::fstat_by_handle): Move to base class
from fhandler_disk_file.
(fhandler_base::fstat_by_name): Ditto.
(fhandler_base::fstat_by_name): Ditto.
(fhandler_disk_file::open): Move most functionality into
fhandler_base::open_fs.
(fhandler_base::open_fs): New function.
(fhandler_disk_file::close): Move most functionality into
fhandler_base::close_fs.
(fhandler_base::close_fs): New function.
* fhandler_mem.cc (fhandler_dev_mem::open): Use device name in debugging
output.
* fhandler_socket.cc (fhandler_socket::set_connect_secret): Copy standard
urandom device into appropriate place.
(fhandler_socket::accept): Reflect change in fdsock return value.
* fhandler_tty.cc: See "throughouts" above.
* net.cc: Accommodate fdsock change throughout.
(fdsock): Return success or failure, accept fd argument and device argument.
* path.cc (symlink_info::major): New element.
(symlink_info::minor): New element.
(symlink_info::parse_device): Declare new function.
(fs_info::update): Accommodate changes in path_conv class.
(path_conv::fillin): Ditto.
(path_conv::return_and_clear_normalized_path): Eliminate.
(path_conv::set_normalized_path): New function.
(path_conv::path_conv): Set info in dev element. Use path_conv methods Check
for FH_FS rather than FH_BAD to indicate when to fill in filesystem stuff.
where appropriate rather than direct access. Use set_normalized_path to set
normalized path.
(windows_device_names): Eliminate.
(get_dev): Ditto.
(get_raw_device_number): Ditto.
(get_device_number): Ditto.
(win32_device_name): Call new device name parser to do most of the heavy
lifting.
(mount_info::conv_to_win32_path): Fill in dev field as appropriate.
(symlink_worker): Handle new device files.
(symlink_info::check): Ditto.
(symlink_info::parse_device): Define new function.
* path.h (executable_states): Move here from fhandler.h.
(fs_info): Rename variables to *_storage and create methods for accessing same.
(path_conv): Add dev element, remove devn and unit and adjust inline methods to
accommodate.
(set_normalized_path): Declare new function.
* pinfo.cc (_pinfo::commune_recv): Add broken support for handling fifos.
(_pinfo::commune_send): Ditto.
* pipe.cc (fhandler_pipe::close): check for existence of handle before closing
it.
(handler_pipe::create): Rename from make_pipe. Change arguments to accept
fhandler_pipe array. Accommodate fifos.
(pipe): Rework to deal with fhandler_pipe::create changes.
(_pipe): Ditto.
* select.cc: Use individual device_specific types throughout rather than
indexing with obsolete device number.
(set_bits): Use is_socket call rather than checking device number.
* shared_info.h (CURR_MOUNT_MAGIC): Update.
(conv_to_win32_path): Reflect addition of device argument.
* syscalls.cc (mknod_worker): New function.
(open): Use build_fh_name to build fhandler.
(chown_worker): Detect if this is an 'auto' device rather than an on-filesystem
device and handle appropriately.
(chmod_device): New function.
(chmod): Detect if this is an 'auto' device rather than an on-filesystem device
and handle appropriately. Use chmod_device to set mode of in-filesystem
devices.
(stat_worker): Eliminate path_conv argument. Call build_fh_name to construct
fhandler. Use fh->error() rather than pc->error to detect errors in fhandler
construction.
(access_worker): New function pulled from access. Accommodate in-filesystem
devices.
(access): Use access_worker.
(fpathconf): Detect if this is an 'auto' device rather than an on-filesystem
device and handle appropriately.
(mknod_worker): New function.
(mknod32): New function.
(chroot): Free normalized path -- assuming it was actually cmalloced.
* tty.cc (create_tty_master): Tweak for new device class.
(tty::common_init): Ditto.
* winsup.h (stat_worker): Remove.
(symlink_worker): Declare.
* exceptions.cc (set_process_mask): Just call sig_dispatch_pending and don't
worry about pending_signals since sig_dispatch_pending should always do the
right thing now.
(sig_handle): Reorganize SIGCONT handling to more closely conform to SUSv3.
* pinfo.h: Move __SIG enum to sigproc.h.
(PICOM_FIFO): New enum element.
(_pinfo): Remove 'thread2signal' stuff throughout class.
(_pinfo::commune_send): Make varargs.
(_pinfo::sigtodo): Eliminate.
(_pinfo::thread2signal): Ditto.
* signal.cc (kill_worker): Eliminate call to setthread2signal.
* sigproc.cc (local_sigtodo): Eliminate.
(getlocal_sigtodo): Ditto.
(sigelem): New class.
(pending_signals): New class.
(sigqueue): New variable, start of sigqueue linked list.
(sigcatch_nonmain): Eliminate.
(sigcatch_main): Eliminate.
(sigcatch_nosync): Eliminate.
(sigcomplete_nonmain): Eliminate.
(pending_signals): Eliminate.
(sig_clear): Call signal thread to clear pending signals, unless already in
signal thread.
(sigpending): Call signal thread to get pending signals.
(sig_dispatch_pending): Eliminate use of pending_signals and just check
sigqueue.
(sigproc_terminate): Eliminate all of the obsolete semaphore stuff. Close
signal pipe handle.
(sig_send): Eliminate all of the obsolete semaphore stuff and use pipe to send
signals.
(getevent): Eliminate.
(pending_signals::add): New function.
(pending_signals::del): New function.
(pending_signals::next): New function.
(wait_sig): Eliminate all of the obsolete semaphore stuff. Use pipe to
communicate and maintain a linked list of signals.
* sigproc.h: Move __SIG defines here. Add __SIGPENDING.
(sig_dispatch_pending): Remove "C" specifier.
(sig_handle): Accept a mask argument.
* thread.cc: Remove signal handling considerations throughout.
(do_cleanup): New function.
(spawn_guts): Initialize struct for pthread_cleanup handling to ensure proper
restoration of signals if/when thread is cancelled. Restore settings using
pthread_cancel_pop.
* thread.cc (__reent_t::init_clib): Define new function.
(pthread::thread_init_wrapper): Use __reent_t::init_clib to init local clib
storage and set std{in,out,err} appropriately.
(winpids::winpids): Rejigger to set pinfo_access.
* pinfo.cc (winpids::add): Try to open shared memory region with supplied
pinfo_access first, then default to readonly.
* fhandler_termios.cc (tty_min::kill_pgrp): When getting list of pids to work
with, suggest opening with PID_MAP_RW.
* signal.cc (kill_pgrp): Ditto.
* sigproc.cc (sig_send): Perform a write check on todo prior to attempting to
increment it. Return EACCES if we can't write to it.
* security.h (__sec_user): Add "access2" argument.
(sec_acl): Add "original" and "access2" arguments.
(sec_user): Add "sid2" and "access2" argument. Remove dependence on
allow_ntsec.
(sec_user_nih): Ditto.
* sec_helper.cc (__sec_user): Add "has_security" test.
Call sec_acl with new arguments, letting it handle original_sid.
(sec_acl): Add "original" and "access2" arguments. Handle original_sid
depending on flag but avoiding duplicates. Use "access2" for sid2.
* pinfo.cc (pinfo::init): Use security attributes created by sec_user
when creating the mapping.
* security.cc (create_token): Adjust arguments in call to sec_acl.
Call sec_user instead of __sec_user.
* syscall.cc (seteuid32): Adjust arguments in call to sec_acl. Remove
now unnecessary test. Remove useless conversions to psid.
* dcrt0.cc (dll_crt0_1): Call cygsid::init before pinfo_init.
* cygwin.din: Remove extraneous mallinfo definition.
* dcrt0.cc (quoted): Use strechr for efficiency.
* fhandler.cc (fhandler_base::write): Correctly use get_output_handle rather
than get_handle.
(fhandler_base::lseek): Use method for accessing name in debug output.
* pinfo.cc (pinfo_init): Initialize myself->gid.
(pinfo::init): Create the "access" variable, set it appropriately and use it to
specify the requested access.
* exceptions.cc (sig_handle_tty_stop): Add PID_MAP_RW in pinfo parent.
* signal.cc (kill_worker): Ditto for pinfo dest.
* syscalls.cc (setpgid): Ditto for pinfo p.
* exceptions.cc (early_stuff_init): Delete.
(init_console_handler): New function - top half of early_stuff_init.
(init_global_security): New function - bottom half of early_stuff_init.
(sig_handle): Avoid special hExeced test for SIGINT. Just terminate the
captive process.
(signal_exit): Add debugging output.
* fhandler_tty.cc (fhandler_tty_slave::open): Don't allocate a console if one
already seems to exist. Properly initialize ctrl-c handling if we do allocate
a console.
* winsup.h (early_stuff_init): Delete declaration.
(init_console_handler): New declaration.
(init_global_security): New declaration.
Christopher Faylor
Pierre Humblet
Corinna Vinschen
Joshua Daniel Franklin
Thomas Pfaff
Robert Collins