being read for executable test since we could be checking for less than that.
* syscalls.cc (stat_worker): Try opening the file the "correct" way first so
that #! processing can potentially happen. If that fails, then use "query
open" method.
* spawn.cc (spawn_guts): Delay processing of signal until after we've notified
parent about reparenting.
to 0, when requested.
* fhandler.h: New status flag FH_QUERYOPEN.
(fhandler::get_query_open): New function.
(fhandler::set_query_open): Ditto.
* syscalls.cc (stat_worker): Request query-only open mode.
doesn't deal well with "negative" chars.
* fhandler.cc (fhandler_disk_file::open): Propagate remote status of file
garnered from path_conv. Move #! checking to fstat.
(fhandler_disk_file::fstat): Reorganize st_mode setting to eliminate
duplication. Move check for #! here from fhandler::open.
* fhandler.h (fhandler_base::isremote): New method.
(fhandler_base::set_isremote): Ditto.
(fhandler_base::set_execable_p): Also record "don't care if executable state".
(fhandler_base::dont_care_if_execable): New method.
* path.cc (path_conv::check): Clear new flags. Appropriately set vol_flags,
drive_type, and is_remote_drive.
* path.h: Add new flags and methods for manipulating them.
* syscalls.cc (_unlink): Use isremote() to determine if a path is remote rather
than calling GetDriveType.
(stat_worker): Ditto.
* security.cc (get_file_attribute): Or attribute with result of NTReadEA to be
consistent with get_nt_attribute.
* fhandler.h (fhandler_base::set_open_status): New method. Stores original
open status.
(fhandler_base::get_open_status): New method. Retrieves original open status.
(fhandler_base::reset_to_open_binmode): New method.
* fhandler.cc (fhandler_base::open): Save open status.
(fhandler_base::init): Ditto.
* fhandler_clipboard.cc (fhandler_clipboard::open): Ditto.
* fhandler_console.cc (fhandler_console::open): Ditto.
* fhandler_dsp.cc (fhandler_dsp::open): Ditto.
* fhandler_dev_mem.cc (fhandler_dev_mem::open): Ditto.
* fhandler_dev_random.cc (fhandler_dev_random::open): Ditto.
* fhandler_serial.cc (fhandler_serial::open): Ditto.
* fhandler_tty_slave.cc (fhandler_tty_slave::open): Ditto.
* fhandler_tty_master.cc (fhandler_tty_master::open): Ditto.
* fhandler_dev_zero.cc (fhandler_dev_zero::open): Ditto.
* syscalls.cc (setmode): Rework so that 0 mode value causes reversion to open
state.
* fhandler_tty_slave.cc (fhandler_tty_slave::read): Use correct multiplier when
converting from deciseconds to milliseconds.
(fork_parent): Call the __pthread_atforkparent function.
* cygwin.din: Export pthread_atfork.
* thread.h (callback): New class.
(MTinterface): Use it.
* thread.cc (__pthread_atforkprepare): New function.
(__pthread_atforkparent): New function.
(__pthread_atforkchild): New function.
(__pthread_atfork): New function.
* pthread.cc (pthread_atfork): New function.
* environ.cc: Add extern declaration for `pcheck_case'.
(check_case_init): New function.
(struct parse_thing): Add "check_case" option.
* errno.cc (_sys_nerrlist): Add text for ECASECLASH.
(strerror): Add case branch for ECASECLASH.
* fhandler.cc (fhandler_disk_file::open): Check for case clash.
* path.cc: Add global variable `pcheck_case'.
(struct symlink_info): Add member `case_clash' and method `case_check'.
(path_prefix_p_): Call `pathnmatch' instead of `strncasematch'.
(pathnmatch): New funtion.
(pathmatch): Ditto.
(path_conv::check): Add handling for case checking.
(symlink): Check for case clash.
(symlink_info::check): Add parameter for case checking.
Handle case checking.
(symlink_info::case_check): New method.
(chdir): Don't use unconverted path if pcheck_case==PCHECK_STRICT.
* path.h: Add extern declarations for `pathmatch' and
`pathnmatch'.
(enum case_checking): New enumeration type describing
the case checking behaviour of path conversion routines.
(class path_conv): Add member `case_clash'.
* syscalls.cc (_link): Check for case clash.
chrisiasci@aol.com).
* cygwin.din: Add a new, internally used export - _check_for_executable.
* dcrt0.cc (dll_crt0_1): Set _check_for_executable for older binaries. Pass
user_data to premain functions.
* fhandler.cc (fhandler_disk_file::open): Only check for executable if the
linked program is intereested in the executable bit.
(fhandler_disk_file::check_execable_p): Delete.
* fhandler.h (executable_states): New enumeration of various states of
executable bit caring.
(fhandler_base::set_execable_p): New method.
* fhandler_termios.cc (fhandler_termios::line_edit): Flag when a signal has
been sent to the tty. Return -1 when this is so.
* fhandler_console.cc (fhandler_console::read): Return -1 when signal sending
character encountered.
* path.cc (path_conv::check): Record when path refers to a disk device. Move
executable extension check here.
(check_sysfile): Accomodate new EXEC path states.
(has_suffix): Remove.
(next_suffix): Remove.
(class suffix_scan): New clas.
(suffix_scan::has): New method.
(suffix_scan:next): New method.
(symlink_info::check): Use suffix_scan method to control for scanning for
suffixes.
* path.h (path_conv::exec_state): New method.
* perprocess.h: Make "C" friendly.
* include/cygwin/version.h: Define CYGWIN_VERSION_CHECK_FOR_S_IEXEC. Bump
CYGWIN_VERSION_API_MINOR.
* include/sys/cygwin.h: Change premain declarations.
* winsup.h: Move __cplusplus test to after builtin defines.
* autoload.cc: Add LoadDLLinitfunc for ole32.dll.
Add LoadDLLfuncEx statements for CoInitialize@4, CoUninitialize@0
and CoCreateInstance@20.
* dir.cc (dir_suffixes): New datastructure.
(readdir): Check for R/O *.lnk files to hide the suffix.
(opendir): Use `dir_suffixes' in path conversion.
(rmdir): Ditto.
* fhandler.cc (fhandler_disk_file::fstat): Add S_IFLNK flag
before calling `get_file_attribute'. Take FILE_ATTRIBUTE_READONLY
into account only if the file is no symlink.
* path.cc (inner_suffixes): New datastructure.
(SYMLINKATTR): Eliminated.
(path_conv::check): Use `inner_suffixes' on inner path components.
(shortcut_header): New global static variable.
(shortcut_initalized): Ditto.
(create_shortcut_header): New function.
(cmp_shortcut_header): Ditto.
(symlink): Create symlinks by creating windows shortcuts. Preserve
the old code.
(symlink_info::check_shortcut): New method.
(symlink_info::check_sysfile): Ditto.
(symlink_info::check): Check for shortcuts. Move code reading
old system attribute symlinks into symlink_info::check_sysfile().
(chdir): Use `dir_suffixes' in path conversion.
* security.cc (get_file_attribute): Check for S_IFLNK flag.
Force 0777 permissions then.
* spawn.cc (std_suffixes): Add ".lnk" suffix.
* syscalls.cc (_unlink): Use `inner_suffixes' in path conversion.
Check for shortcut symlinks to eliminate R/O attribute before
calling DeleteFile().
(stat_suffixes): Add ".lnk" suffix.
(stat_worker): Force 0777 permissions if file is a symlink.
when opening raw disk devices.
* fhandler_floppy.cc (fhandler_dev_floppy::lseek): Implement bytewise
access.
* fhandler_raw.cc (fhandler_dev_raw::open): Always open raw disk device
binary.
(fhandler_dev_raw::raw_write): Don't drop read buffer content when
writing after read.
`smbntsec'.
* path.cc (path_conv::check): Check path for being a remote path.
If so and `allow_smbntsec' is set to FALSE, set has_acls to FALSE.
* security.cc: Add global definition for `allow_smbntsec'.
* security.h: Add extern declaration for `allow_smbntsec'.
* fhandler.cc (fhandler_disk_file::open): Eliminate extern declaration
of `allow_ntsec'.
* syscalls.cc: Ditto.
condition.
* path.cc (path_conv::check): Get file system type in call to
GetVolumeInformation to check for file systems with buggy CreateFile.
* path.h (enum path_types): Add PATH_HASBUGGYOPEN.
(class path_conv): Add methods `has_buggy_open' and
`set_has_buggy_open'.
(fhandler_base::raw_read): Detect special case where last error ==
ERROR_NOACCESS but the file is at EOF. Most UNIXes do not consider this to be
an error.
execed process to avoid a race.
* sigproc.cc (wait_subproc): Print more info when a WFSO error occurs.
* automode.c: New file.
* syscalls.cc (close_all_files): Streamline slightly.
* cygheap.cc (ccalloc): Clear *entire* allocated array.
* dcrt0.cc (dll_crt0_1): Call signal_fixup_after_exec where appropriate. Set
myself->uid from parent version. Just use ThreadItem Init method. Close or
store hexec_proc as appropriate.
(_dll_crt0): Store user_data->forkee here so that proper tests can be made
subsequently.
(do_exit): Remove hExeced stuff.
* environ.cc (environ_init): Accept environ count as well as environ pointer.
* environ.h: Reflect above change.
* pinfo.cc (pinfo_init): Ditto. Accept environ count.
(fixup_in_spawned_child): Remove.
* spawn.cc (spawn_guts): Move signal code to dll_crt0_1. Don't suspend execing
process since it is no longer necessary. Store envc.
* exceptions.cc (signal_fixup_after_exec): New function.
(call_handler): Remove hExeced test.
* child_info.h (cygheap_exec_info): Store envc as well as envp.
(child_info_spawn): Store hexec_proc so that it can be closed in child.
* path.cc (normalize_posix_path): Avoid intermediate use of temporary cwd buf.
(normalize_win32_path): Ditto.
(cwdstuff::get_initial): Always set lock.
* sigproc.h: Remove hExeced.
* strace.cc (strace::vsprntf): Modify to accomodate for lack of hExeced.
* thread.cc (MTinterface::Init): Merge Init1 and ClearReent into this method.
(MTinterface::Init1): Eliminate.
(MTinterface::ClearReent): Eliminate.
* thread.h: Reflect above changes.
* include/sys/strace.h (strace): Make microseconds() public. Make various
functions 'regparm', throughout.
* pinfo.h (_pinfo): Inline simple signal manipulation functions. Requires
inclusion of thread.h which was removed from .cc files, where appropriate.
throughout.
* pinfo.cc: Eliminate signal manipulation functions.
(_pinfo::exit): Calculate total rusage for exiting process here.
* cygheap.cc (size2bucket): Eliminate.
(init_buckets): Ditto.
(_cmalloc): Calculate size and bits in a loop rather than going through a
function call.
(_crealloc): Use stored array index to calculate allocated size.
* spawn.cc (spawn_guts): Use _pinfo exit method to exit, calculating cpu usage.
* fhandler.cc (fhandler_base::fstat): Move to inline method in fhandler.h.
(fhandler_base::set_io_handle): Ditto.
* fhandler.h (fhandler_base): Make some methods inline.
* fhandler_console.cc (fhandler_console::write_normal): Make buffer larger.
* sigproc.h (sigframe::sigframe): Actually use set ebp parameter correctly.
* spawn.cc (spawn_guts): Set dwProcessId when exec'ing. Just exit immediately
after reparenting.
* syscalls.cc: Sprinkle sigframe stuff throughout.
* wait.cc (wait4): Set signal frame here.
* dcrt0.cc (__api_fatal): Don't rely on small_printf to display errors. Always
display problems to the console, if possible.
* fhandler.cc (fhandler_base::open): Ditto.
* fhandler.cc (fhandler_base::fhandler_base): Ditto.
(fhandler_base::read): Ditto. Add more debugging output. Don't issue a \r
when \r\n detected.
* pipe.cc (make_pipe): Streamline slightly. Make debug output more
interesting.
* strace.cc (strace::vsprintf): Use __progname where appropriate to distinguish
strace output when exec'ing.
throughout.
* shared.h: Remove.
* cygwin_version.h: New file.
* delqueue.h: New file.
* environ.h: New file.
* host_dependent.h: New file.
* perprocess.h: New file.
* registry.h: New file.
* security.h: New file.
Include sys/termios.h for files which need it.
* tty.h: New file.
* shared_info.h: New file.
* fhandler.h: Move inline methods that rely on tty stuff to
fhandler_console.cc.
* fhandler_tty.cc (fhandler_pty_master::process_slave_output): Set
output_done_event immediately after reading data to speed up tty output
processing.
(process_output): Set write_error to errno or zero.
(fhandler_tty_slave::write): Check previous write error prior to writing to
slave end of pipe. This allows tty output to be slightly less synchronous.
* fhandler_console.cc (fhandler_console::tcsetpgrp): Moved here from
fhandler.h.
(fhandler_console::set_input_state): Ditto.
* child_info.h: Add specific exec class.
* cygheap.h: New file. Contains declarations for cygwin heap.
* cygheap.cc: New file. Implements cygwin heap functions.
* dcrt0.cc (quoted): Simplify due to new method for passing arguments between
cygwin programs.
(alloc_stack_hard_way): Attempt to handle overlapped stack.
(dll_crt0_1): Move child_info processing here. Accomodate new method for
passing arguments between cygwin programs. Initialize cygwin heap. Establish
__argc and __argv variables.
(_dll_crt0): Move most of child_info processing to dll_crt0_1.
(cygwin_dll_init): Remove duplication.
* dtable.cc (dtable::extend): Allocate dtable using cygwin heap.
(dtable::build_fhandler): Ditto for fhandler type being constructed.
(dtable::dup_worker): Free new fhandler from cygwin heap on error.
(dtable::select_*): Don't assume that this == fdtab.
(dtable::linearize_fd_array): Delete.
(dtable::delinearize_fd_array): Delete.
(dtable::fixup_after_exec): New file.
(dtable::vfork_child_dup): Use cygwin heap.
(dtable::vfork_parent_restore): Ditto.
* dtable.h: Remove obsolete methods. Add new method.
* environ.cc (posify): Eliminate already_posix parameter and logic.
(envsize): New function.
(_addenv): Use envsize.
(environ_init): Accept an argument pointing to an existing environment list.
If supplied, allocate space for this in the the program's heap.
* fhandler.cc (fhandler_base::operator =): Move here from fhandler.h. Use
cygwin heap to allocate filenames.
(fhandler_base::set_name): Allocate/free names from cygwin heap.
(fhandler_base::linearize): Delete.
(fhandler_base::de_linearize): Delete.
(fhandler_base::operator delete): Free from cygwin heap.
(fhandler_base::~fhandler_base): Ditto.
* fhandler.h: Accomodate elimination of *linearize and other changes above.
* fhandler_console.cc (fhandler_console::fixup_after_exec): Rename from
de_linearize.
* heap.h: New file.
* fhandler_tty.cc (fhandler_tty_slave::fhandler_tty_slave): Use cygwin heap for
name. fhandler_tty::fixup_after_exec): Rename from de_linearize.
* fork.cc (fork): Call cygheap_fixup_in_child.
* heap.cc: Use declarations in heap.h.
* malloc.cc: Sprinkle assertions throughout to catch attempts to free/realloc
something from the cygwin heap.
* path.cc: Throughout, eliminate use of per-thread cache for cwd. Use cwd_*
functions rather than cwd_* variables to access cwd_win32 and cwd_posix.
(cwd_win32): New function.
(cwd_posix): New function.
(cwd_hash): New function.
(cwd_fixup_after_exec): New function.
* path.h: Accomodate path.cc changes.
* pinfo.cc (pinfo_init): Accept a pointer to an environment table. Pass this
to environ_init. Eliminate old 'title' tests.
* pinfo.h: Accomodate above change in argument.
* spawn.cc (struct av): New method for building argv list.
(av::unshift): New method.
(spawn_guts): Allocate everything that the child process needs in the cygwin
heap and pass a pointer to this to the child. Build argv list using new
method. Eliminate delinearize stuff.
* thread.h: Eliminate _cwd_win32 and _cwd_posix buffers.
* winsup.h: Eliminate obsolete functions. Add envsize() declaration.
(regopt): Use correct path to find LOCAL_MACHINE registry options.
* fhandler.cc (fhandler_base::open): Set binary mode only when binmode ==
O_BINARY.
* pipe.cc (pipe): Pipe handling should rely on binmode not _fmode now that the
two are different.
required.
* errno.cc: Use DWORD to hold Windows errors.
(geterrno_from_win_error): New function.
(seterrno_from_win_error): Use geterrno_from_win_error to convert supplied
windows error (suggested by Corinna Vinschen).
* path.cc (symlink_info): Add error element.
* path.cc (path_conv::check): Remove errno setting. Use new symlink_info errno
element to set path_conv error, where appropriate.
(symlink_info::check): Set error element rather than attempting to manipulate
errno. Add more checks for trailing / and /.. even though they are currently
useless. Avoid setting EINVAL.
* path.cc (normalize_posix_path): Correct check for trailing /.
* *.cc: put winsup.h before other headers (for __INSIDE_CYGWIN__);
use cur_environ() instead of just environ
* times.cc: remove import protections
* glob.c: add winsup.h
* localtime.c: ditto
* smallprint.c: ditto
* Makefile.in: don't __INSIDE_CYGWIN__ as it messes up profiling.
for second argument.
* path.h: Generalize SYMLINK_* constants to PC_*.
(path_conv): Create a new method. Fold third argument into second.
* dll_init.cc (dll_list::alloc): Try harder to find space to allocate dll
struct.
(dll_dllcrt0): Don't check sanity if we've already called dll_crt0.
* path.cc (path_conv::check): Don't check for a null or empty path unless
specifically told with a flag setting.
(check_null_empty_path): New function, adapted from macro.
* syscalls.cc (_rename): Use already-determined file attributes rather than
checking again.
* lib/cygwin/cygwin_attach.dll.c (cygwin_attach_dll): Use a static per_process
structure since this is apparently supposed to be zeroed.
* lib/cygwin_crt0.c (cygwin_crt0): Zero per_process structure sent to older
DLLs.
an fd.
* external.cc (cygwin_internal): Add handling of perfile_table setting.
* fhandler.cc (perfile_table): New global.
(fhandler_base::get_default_fmode): New method to return a file's default mode
based on its name.
(fhandler_base::open): Use get_default_mode method to determine a file's mode.
Record file mode in file flags.
* fhandler.h (fhandler_base): Declare get_default_fmode
* syscalls.cc (getmode): New function.
* sys/cygwin.h (__cygwin_perfile): New structure.
(cygwin_getinfo_types): Move outside of WINVER conditional.
(per_process): Move inside of WINVER conditional.
appropriate.
(LIBCOS): Find additional stub library stuff in their own subdirectory.
* dcrt0.cc: Convert user_data pointer to static __cygwin_user_data area.
(do_global_ctors): Check magic_bisquit for initialization.
(dll_crt0_1): First group of premain functions prior to fd initialization. Run
second group before calling main.
(dll_crt0 ()): New function, called from new initialization code.
(dll_crt0 (per_process *uptr)): Call new dll_crt0 () function on
initialization.
* debug.cc (thread_stub): Initialize bottom of stack with per-thread info.
* environ.cc (parse_thing): Use binmode global to control CYGWIN=binmode
behavior.
* fhandler.cc (fhandler_base::open): Allow explicit setting of __fmode to
O_BINARY or O_TEXT to override disk mount settings.
* libcmain.cc: Move to lib subdirectory.
* libccrt0.cc: Ditto.
* dll_main.cc: Ditto.
* dll_entry.cc: Ditto.
* getopt.c: Ditto.
* thread.cc (thread_init_wrapper): Call ExitThread explicitly rather than
returning, as a preliminary step towards placing per thread info at the bottom
of the stack.
* winsup.h: Move per_process class to include/sys/cygwin.h. Declare new
dll_crt0().
* include/cygwin/version.h: Bump API minor version.
* binmode.c: New file.
* textmode.c: Ditto.
* lib/_cygwin_crt0_common.cc: Ditto.
* lib/crt0.h: Ditto.
* lib/cygwin_attach_dll.c: Ditto.
* lib/cygwin_crt0.c: Ditto.
* lib/dll_entry.cc: Ditto.
* lib/dll_main.cc: Ditto.
* lib/getopt.c: Ditto.
* lib/libcmain.c: Ditto.
* lib/premain0.c: Ditto.
* lib/premain1.c: Ditto.
* lib/premain2.c: Ditto.
* lib/premain3.c: Ditto.
when determining exec flag.
* path.cc (symlink_info::check): Remove call to get_file_attribute().
* security.cc (read_sd): Rename, ditto for variables to conform
to common naming convention. Use GetFileSecurity() instead of
BackupRead() to avoid permission problems when reading ACLs.
(write_sd): Same renaming as for read_sd().
(alloc_sd): Change default permissions according to Linux permissions
for group and world when write permission is set.
* syscalls.cc (stat_worker): Avoid different permission problems
when requesting file informations.
(fhandler_base::set_inheritance): Make this a method so that we can use the
appropriate close methods.
* fhandler.cc (fhandler_base::set_inheritance): Ditto.
* path.cc (normalize_posix_path): Eliminate /. trailing path component.
(get_nt_attribute): Returns uid and gid additionally. Removed call
to set_process_privileges().
(get_file_attribute): Returns uid and gid additionally. Don't
call ntea if ntsec is ON.
(set_nt_attribute): Removed call to set_process_privileges().
Don't call ntea if ntsec is ON.
(acl): Removed call to set_process_privileges().
* dcrt0.cc (dll_crt0_1): Calls set_process_privileges() now.
* winsup.h: New prototype for set_process_privileges(),
changed prototype for get_file_attribute().
* fhandler.cc (get_file_owner): Discarded.
(get_file_group): Ditto.
(fhandler_disk_file::fstat): Discard calls to get_file_owner() and
get_file_group().
* path.cc (path_conv::path_conv): Added debugging output for result
of GetVolumeInformation().
(mount_info::conv_to_win32_path): Call backslashify() with pathbuf
instead of src_path.
* syscalls.cc (chown): Reformatted.
(chmod): Replace get_file_owner() and get_file_group() calls
by a call to get_file_attribute(). Discard local variable has_acls.
Slightly reformatted.
(stat_worker): Replaced idiot's (it's me) root dir check by call
to rootdir(). Don't call num_entries() on remote drives.
Discard local variable has_acls.
* debug.cc (threadname_init): Pass name of lock as arg 2 of new_muto.
* malloc.cc (malloc_init): Ditto.
* sigproc.cc (sigproc_init): Ditto.
* exceptions.cc (events_init): Ditto.
(call_handler): Eliminate special case for hExeced. Report locked thread in
debugging output.
* fhandler.cc (fhandker_pipe::fhandler_pipe): Propagate device type to base
class.
* fhandler.h (fhandler_pipe): Ditto.
* hinfo.cc (hinfo::build_fhandler): Pass specific type of pipe to constructor.
* spawn.cc (spawn_guts): Eliminate dependency on signal when waiting for
subprocess.
* strace.cc: Remove obsolete #ifdef.
* sync.cc (muto::muto): Save the name of the muto.
(muto:~muto): Also release the muto.
* sync.h: Add a muto name field.
* select.cc (peek_pipe): Avoid doing a PeekNamedPipe on the write end of a
pipe.
* fhandler.h: Declare new function. Add extra argument to
process_slave_output.
* fhandler_console.cc (fhandler_console::read): Move read ahead code to new
function.
* fhandler_tty.cc (fhandler_pty_master::process_slave_output): Move common code
here.
(fhandler_tty_slave::read): Understand readahead.
(fhandler_pty_master::read): Move code to process_slave_output.
* select.cc (peek_pipe): Avoid performing certain checks when non-read and on
inappropriate fh types.
(call_handler): Allow signals to be sent even if signalled thread is stopped.
Change order of signal_arrived arming/waiting threads clearing to eliminate a
race.
(reset_signal_arrived): New helper function.
* malloc.cc (malloc_init): Use mutos so that signal handler can keep track of
who owns the lock.
(__malloc_lock): Ditto.
(__malloc_unlock): Ditto.
* sync.h (new_muto): Actually use a muto for the "buffer".
* Makefile.in: Fix a dependency.
Christopher Faylor
Egor Duda
Corinna Vinschen
DJ Delorie