* i386.h (i386_optab): Mark VIA PadLock instructions as ImmExt and
adjust them accordingly.
gas/ChangeLog:
* config/tc-i386.c (output_insn): Handle VIA PadLock instructions
similar to other instructions now that they're marked as ImmExt.
2005-03-29 H.J. Lu <hongjiu.lu@intel.com>
* gas/i386/i386.exp: Run segment and inval-seg for i386. Run
x86-64-segment and x86-64-inval-seg for x86-64.
* gas/i386/intel.d: Expect movw for moving between memory and
segment register.
* gas/i386/naked.d: Likewise.
* gas/i386/opcode.d: Likewise.
* gas/i386/x86-64-opcode.d: Likewise.
* gas/i386/opcode.s: Use movw for moving between memory and
segment register.
* gas/i386/x86-64-opcode.s: Likewise.
* : Likewise.
* gas/i386/inval-seg.l: New.
* gas/i386/inval-seg.s: New.
* gas/i386/segment.l: New.
* gas/i386/segment.s: New.
* gas/i386/x86-64-inval-seg.l: New.
* gas/i386/x86-64-inval-seg.s: New.
* gas/i386/x86-64-segment.l: New.
* gas/i386/x86-64-segment.s: New.
include/opcode/
2005-03-29 H.J. Lu <hongjiu.lu@intel.com>
* i386.h (i386_optab): Don't allow the `l' suffix for moving
moving between memory and segment register. Allow movq for
moving between general-purpose register and segment register.
opcodes/
2005-03-29 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (SEG_Fixup): New.
(Sv): New.
(dis386): Use "Sv" for 0x8c and 0x8e.
2005-02-15 Nigel Stephens <nigel@mips.com>
Maciej W. Rozycki <macro@mips.com>
* elf32-mips.c (elf_mips16_howto_table_rel): New array for MIPS16
reloc howtos. Add R_MIPS16_HI16 and R_MIPS16_LO16 relocs and
R_MIPS16_GOT16 and R_MIPS16_CALL16 placeholders.
(elf_mips16_jump_howto): Move into elf_mips16_howto_table_rel.
(elf_mips16_gprel_howto): Likewise. Redefine src_mask and
dst_mask.
(mips16_gprel_reloc): Remove bit shuffling; call
_bfd_mips16_elf_reloc_unshuffle(), _bfd_mips_elf_gprel16_with_gp()
and _bfd_mips16_elf_reloc_shuffle() instead.
(mips16_reloc_map): New reloc map for MIPS16 relocs.
(bfd_elf32_bfd_reloc_type_lookup): Use mips16_reloc_map for MIPS16
relocs.
(mips_elf32_rtype_to_howto): Fetch MIPS16 howtos from
elf_mips16_howto_table_rel.
* elf64-mips.c (mips16_elf64_howto_table_rel): New array for
MIPS16 REL reloc howtos. Add R_MIPS16_HI16 and R_MIPS16_LO16
relocs and R_MIPS16_GOT16 and R_MIPS16_CALL16 placeholders.
(elf_mips16_jump_howto): Move into mips16_elf64_howto_table_rel.
(elf_mips16_gprel_howto): Likewise. Redefine src_mask and
dst_mask.
(mips16_elf64_howto_table_rela): New array for MIPS16 RELA
reloc howtos. Add R_MIPS16_26, R_MIPS16_GPREL, R_MIPS16_HI16 and
R_MIPS16_LO16 relocs and R_MIPS16_GOT16 and R_MIPS16_CALL16
placeholders.
(mips16_gprel_reloc): Remove bit shuffling; call
_bfd_mips16_elf_reloc_unshuffle(), _bfd_mips_elf_gprel16_with_gp()
and _bfd_mips16_elf_reloc_shuffle() instead.
(mips16_reloc_map): New reloc map for MIPS16 relocs.
(bfd_elf64_bfd_reloc_type_lookup): Use mips16_reloc_map for MIPS16
relocs.
(mips_elf64_rtype_to_howto): Fetch MIPS16 howtos from
mips16_elf64_howto_table_rela or mips16_elf64_howto_table_rel.
* elfn32-mips.c (elf_mips16_howto_table_rel): New array for MIPS16
REL reloc howtos. Add R_MIPS16_HI16 and R_MIPS16_LO16 relocs and
R_MIPS16_GOT16 and R_MIPS16_CALL16 placeholders.
(elf_mips16_jump_howto): Move into elf_mips16_howto_table_rel.
(elf_mips16_gprel_howto): Likewise. Redefine src_mask and
dst_mask.
(mips16_gprel_reloc): Remove bit shuffling; call
_bfd_mips16_elf_reloc_unshuffle(), _bfd_mips_elf_gprel16_with_gp()
and _bfd_mips16_elf_reloc_shuffle() instead.
(mips16_reloc_map): New reloc map for MIPS16 relocs.
(bfd_elf32_bfd_reloc_type_lookup): Use mips16_reloc_map for MIPS16
relocs.
(mips_elf_n32_rtype_to_howto): Fetch MIPS16 howtos from
elf_mips16_howto_table_rela or elf_mips16_howto_table_rel.
* elfxx-mips.c (_bfd_mips16_elf_reloc_unshuffle): New function to
handle bit shuffling for MIPS16 relocs.
(_bfd_mips16_elf_reloc_shuffle): Likewise.
(_bfd_mips_elf_lo16_reloc): Use _bfd_mips16_elf_reloc_unshuffle()
and _bfd_mips16_elf_reloc_shuffle().
(_bfd_mips_elf_generic_reloc): Likewise.
(mips_elf_calculate_relocation): Likewise. Handle R_MIPS16_HI16
and R_MIPS16_LO16.
(mips_elf_obtain_contents): Remove bit shuffling.
(mips_elf_perform_relocation): Likewise; call
_bfd_mips16_elf_reloc_unshuffle() and _bfd_mips16_elf_reloc_shuffle()
instead.
(_bfd_mips_elf_relocate_section): Likewise. Handle R_MIPS16_HI16
and R_MIPS16_LO16.
* elfxx-mips.h (_bfd_mips16_elf_reloc_unshuffle): Declare.
(_bfd_mips16_elf_reloc_shuffle): Likewise.
* reloc.c (BFD_RELOC_MIPS16_HI16): New reloc.
(BFD_RELOC_MIPS16_HI16_S): Likewise.
(BFD_RELOC_MIPS16_LO16): Likewise.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
gas/:
2005-02-15 Nigel Stephens <nigel@mips.com>
Maciej W. Rozycki <macro@mips.com>
* config/tc-mips.c (reloc_needs_lo_p): Handle
BFD_RELOC_MIPS16_HI16_S.
(fixup_has_matching_lo_p): Handle BFD_RELOC_MIPS16_LO16.
(append_insn): Add BFD_RELOC_MIPS16_GPREL, BFD_RELOC_MIPS16_HI16_S
and BFD_RELOC_MIPS16_LO16 to relocs to suppress overflow
complaints on.
(mips16_ip): Resolve BFD_RELOC_MIPS16_HI16_S,
BFD_RELOC_MIPS16_HI16 and BFD_RELOC_MIPS16_LO16 for constants.
Call my_getSmallExpression() to parse percent operators.
(percent_op_match, mips_percent_op): Separate definitions.
(mips16_percent_op): Define percent operators for the MIPS16 mode.
(parse_relocation): Handle the MIPS16 mode using
mips16_percent_op.
(md_apply_fix3): Handle BFD_RELOC_MIPS16_HI16,
BFD_RELOC_MIPS16_HI16_S and BFD_RELOC_MIPS16_LO16.
gas/testsuite/:
2005-02-15 Nigel Stephens <nigel@mips.com>
Maciej W. Rozycki <macro@mips.com>
* gas/mips/mips16-hilo.d: New test for the R_MIPS16_HI16 and
R_MIPS16_LO16 relocs.
* gas/mips/mips16-hilo-n32.d: Likewise, for the n32 ABI.
* gas/mips/mips16-hilo.s: Source for the new tests.
* gas/mips/mips.exp: Run the new tests.
include/:
2005-02-15 Nigel Stephens <nigel@mips.com>
Maciej W. Rozycki <macro@mips.com>
* elf/mips.h (R_MIPS16_GOT16): New reloc code.
(R_MIPS16_CALL16): Likewise.
(R_MIPS16_HI16): Likewise.
(R_MIPS16_LO16): Likewise.
(R_MIPS16_min): New fake reloc code.
(R_MIPS16_max): Likewise.
ld/testsuite/:
2005-02-15 Nigel Stephens <nigel@mips.com>
Maciej W. Rozycki <macro@mips.com>
* ld-mips-elf/mips16-hilo.d: New test for the R_MIPS16_HI16 and
R_MIPS16_LO16 relocs.
* ld-mips-elf/mips16-hilo-n32.d: Likewise, for the n32 ABI.
* ld-mips-elf/mips16-hilo.s: Auxiliary source for the new tests.
* ld-mips-elf/mips-elf.exp: Run the new tests.
2005-02-09 Jan Beulich <jbeulich@novell.com>
* gas/i386/intelok.s: Remove comments disabling alternative forms of
fbld, fbstp, and fldcw.
* gas/i386/intelok.d: Expect two instances of fbld, fbstp, and fldcw.
include/opcode/
2005-02-09 Jan Beulich <jbeulich@novell.com>
PR gas/707
* i386.h (i386_optab): Add x_Suf to fbld and fbstp. Add w_Suf and
FloatMF to fldcw, fstcw, fnstcw, and the memory formas of fstsw and
fnstsw.
* bfdlink.h (struct bfd_link_hash_entry): Add u.undef.weak.
bfd/
* linker.c (_bfd_generic_link_add_one_symbol): Set u.undef.weak.
* elflink.c (elf_smash_syms): Restore symbols that were undefweak
before the as-needed lib was loaded. Abort on unexpected refs.
* mips.h (struct mips_opcode): Add new pinfo2 member.
(INSN_ALIAS): New define for opcode table entries that are
specific instances of another entry, such as 'move' for an 'or'
with a zero operand.
(INSN_READ_MDMX_ACC): Redefine from 0 to 0x2.
(INSN_WRITE_MDMX_ACC): Redefine from 0 to 0x4.
* configure.in: Don't define SKIP_ZEROES.
* configure: Regenerate.
* objdump.c (disassemble_data): Set skip_zeroes and
skip_zeroes_at_end in disasm_info to defaults.
(DEFAULT_SKIP_ZEROES): Rename from SKIP_ZEROES and always define.
(DEFAULT_SKIP_ZEROES_AT_END): Rename from SKIP_ZEROES_AT_END and
always define.
(disassemble_bytes): Use skip_zeroes and skip_zeroes_at_end from
objdump_disasm_info.
include/:
* dis-asm.h (struct disassemble_info): Add skip_zeroes and
skip_zeroes_at_end.
opcodes/:
* disassemble.c (disassemble_init_for_target) <case
bfd_arch_ia64>: Set skip_zeroes to 16.
<case bfd_arch_tic4x>: Set skip_zeroes to 32.
* v850.h (R_V850_LO16_SPLIT_OFFSET): New reloc.
bfd/
* reloc.c (BFD_RELOC_V850_LO16_SPLIT_OFFSET): New bfd_reloc_code_type.
* elf32-v850.c (v850_elf_howto_table): Add entry for
R_V850_LO16_SPLIT_OFFSET.
(v850_elf_reloc_map): Map it to BFD_RELOC_V850_LO16_SPLIT_OFFSET.
(v850_elf_perform_lo16_relocation): New function, extracted from...
(v850_elf_perform_relocation): ...here. Use it to handle
R_V850_LO16_SPLIT_OFFSET.
(v850_elf_check_relocs, v850_elf_final_link_relocate): Handle
R_V850_LO16_SPLIT_OFFSET.
* libbfd.h, bfd-in2.h: Regenerate.
gas/
* config/tc-v850.c (handle_lo16): New function.
(v850_reloc_prefix): Use it to check lo().
(md_assemble, md_apply_fix3): Handle BFD_RELOC_V850_LO16_SPLIT_OFFSET.
gas/testsuite/
* gas/v850/split-lo16.{s,d}: New test.
* gas/v850/v850.exp: Run it.
ld/testsuite/
* ld-v850: New directory.
2004-11-25 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.c (optimize_imm): Adjust immediates to only those
permissible for the selected instruction suffix.
(process_suffix): For DefaultSize instructions, suppressing the
guessing of a 'q' suffix if the instruction doesn't support it is
pointless, because only an 'l' suffix can be guessed in this place.
gas/testsuite/
2004-11-25 Jan Beulich <jbeulich@novell.com>
* gas/i386/x86-64-inval.[sl]: Remove sahf/lahf.
include/opcode/
2004-11-25 Jan Beulich <jbeulich@novell.com>
* i386.h: CpuNo64 mov can't reasonably have a 'q' suffix. Moves
to/from test registers are illegal in 64-bit mode. Add missing
NoRex64 to sidt. fxsave/fxrstor now allow for a 'q' suffix
(previously one had to explicitly encode a rex64 prefix). Re-enable
lahf/sahf in 64-bit mode as at least some Athlon64/Opteron steppings
support it there. Add cmpxchg16b as per Intel's 64-bit documentation.
2004-11-23 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.h (CpuMMX2): Declare. Artificial classifier to
indicate the MMX extensions added by both SSE and 3DNow!A.
(Cpu3dnowA): Declare.
(CpuUnknownFlags): Update.
* config/tc-i386.c (cpu_sub_arch_name): Declare.
(cpu_arch): i586 and pentium do not imply MMX. i686 and pentiumpro do
neither imply SSE nor MMX. k6 implies MMX. k6_2 additionally implies
3DNow!. Athlon additionally implies 3DNow!A. Several new
entries (those starting with a dot are for sub-arch specification).
(set_cpu_arch): Handle sub-arch specifications.
(parse_insn): Distinguish between instructions not supported because
of insufficient CPU features and because of 64-bit mode.
* doc/c-i386.texi: Describe enhanced .arch directive.
include/opcode/
2004-11-23 Jan Beulich <jbeulich@novell.com>
* i386.h (i386_optab): paddq and psubq, even in their MMX form, are
available only with SSE2. Change the MMX additions introduced by SSE
and 3DNow!A to CpuMMX2 (rather than CpuMMX). Indicate the 3DNow!A
instructions by their now designated identifier (since combining i686
and 3DNow! does not really imply 3DNow!A).
include/ChangeLog
* xtensa-isa-internal.h (xtensa_interface_internal): Add class_id.
* xtensa-isa.h (xtensa_interface_class_id): New prototype.
bfd/ChangeLog
* xtensa-isa.c (xtensa_interface_class_id): New.
gas/ChangeLog
* config/tc-xtensa.c (finish_vinsn): Clear pending instruction if
there is a conflict.
(check_t1_t2_reads_and_writes): Check for both reads and writes to
interfaces that are related as determined by xtensa_interface_class_id.
comments. Remove member cris_ver_sim. Add members
cris_ver_sim_v0_10, cris_ver_v0_10, cris_ver_v3_10,
cris_ver_v8_10, cris_ver_v10, cris_ver_v10p.
(struct cris_support_reg, struct cris_cond15): New types.
(cris_conds15): Declare.
(JUMP_PC_INCR_OPCODE_V32, BA_DWORD_OPCODE, NOP_OPCODE_COMMON)
(NOP_OPCODE_ZBITS_COMMON, LAPC_DWORD_OPCODE, LAPC_DWORD_Z_BITS)
(NOP_OPCODE_V32, NOP_Z_BITS_V32): New macros.
(NOP_Z_BITS): Define in terms of NOP_OPCODE.
(cris_imm_oprnd_size_type): New members SIZE_FIELD_SIGNED and
SIZE_FIELD_UNSIGNED.
2004-11-04 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.c (set_intel_syntax): Allow % in symbol names when
intel syntax and no register prefix, allow $ in symbol names when
intel syntax.
(set_16bit_gcc_code_flag): Replace literal 'l' by LONG_MNEM_SUFFIX.
(intel_float_operand): Add fourth return value indicating math control
operations. Make classification more precise.
(md_assemble): Complain if memory operand of mov[sz]x has no size
specified.
(parse_insn): Translate word operands to floating point instructions
operating on integers as well as control instructions to short ones
as expected by AT&T syntax. Translate 'd' suffix to short one only for
floating point instructions operating on non-integer operands.
(match_template): Remove fldcw special case. Adjust q-suffix handling
to permit it on fild/fistp/fisttp in AT&T mode.
(process_suffix): Don't guess DefaultSize insns' suffix from
stackop_size for certain floating point control instructions. Guess
suffix for branch and [ls][gi]dt based on flag_code. Split error
messages for Intel and AT&T syntax, and make the condition more strict
for the former. Adjust suppressing of generation of operand size
overrides.
(intel parser): Allow the full set of MASM operators. Add FWORD, TBYTE,
OWORD, and XMMWORD operand size specifiers (TBYTE replaces XWORD). Add
more error checking.
* config/tc-i386.h (BYTE_PTR WORD_PTR DWORD_PTR QWORD_PTR XWORD_PTR
SHORT OFFSET_FLAT FLAT NONE_FOUND): Remove unused defines.
gas/testsuite/
2004-11-04 Jan Beulich <jbeulich@novell.com>
* gas/i386/i386.exp: Execute new tests intelbad and intelok.
* gas/i386/intelbad.[sl]: New test to check for various things not
permitted in Intel mode.
* gas/i386/intel.d, gas/i386/opcode.d, gas/i386/x86-64-opcode.d:
Adjust for change to segment register store.
* gas/i386/intelok.[sd]: New test to check various Intel mode specific
things get handled correctly.
* gas/i386/x86_64.[sd]: Remove unsupported constructs referring to
'high' and 'low' parts of an operand, which the parser previously
accepted while neither telling that it's not supported nor that it
ignored the remainder of the line following these supposed keywords.
include/opcode/
2004-11-04 Jan Beulich <jbeulich@novell.com>
* i386.h (sldx_Suf): Remove.
(FP, l_FP, sl_FP, x_FP): Don't imply IgnoreSize.
(q_FP): Define, implying no REX64.
(x_FP, sl_FP): Imply FloatMF.
(i386_optab): Split reg and mem forms of moving from segment registers
so that the memory forms can ignore the 16-/32-bit operand size
distinction. Adjust a few others for Intel mode. Remove *FP uses from
all non-floating-point instructions. Unite 32- and 64-bit forms of
movsx, movzx, and movd. Adjust floating point operations for the above
changes to the *FP macros. Add DefaultSize to floating point control
insns operating on larger memory ranges. Remove left over comments
hinting at certain insns being Intel-syntax ones where the ones
actually meant are already gone.
opcodes/
2004-11-04 Jan Beulich <jbeulich@novell.com>
* i386-dis.c (Eq, Edqw, indirEp, Gdq, I1): Define.
(indirEb): Remove.
(Mp): Use f_mode rather than none at all.
(t_mode, dq_mode, dqw_mode, f_mode, const_1_mode): Define. t_mode
replaces what previously was x_mode; x_mode now means 128-bit SSE
operands.
(dis386): Make far jumps and calls have an 'l' prefix only in AT&T
mode. movmskpX's, pextrw's, and pmovmskb's first operands are Gdq.
pinsrw's second operand is Edqw.
(grps): 1-bit shifts' and rotates' second operands are I1. cmpxchg8b's
operand is Eq. movntq's and movntdq's first operands are EM. s[gi]dt,
fldenv, frstor, fsave, fstenv all should also have suffixes in Intel
mode when an operand size override is present or always suffixing.
More instructions will need to be added to this group.
(putop): Handle new macro chars 'C' (short/long suffix selector),
'I' (Intel mode override for following macro char), and 'J' (for
adding the 'l' prefix to far branches in AT&T mode). When an
alternative was specified in the template, honor macro character when
specified for Intel mode.
(OP_E): Handle new *_mode values. Correct pointer specifications for
memory operands. Consolidate output of index register.
(OP_G): Handle new *_mode values.
(OP_I): Handle const_1_mode.
(OP_ESreg, OP_DSreg): Generate pointer specifications. Indicate
respective opcode prefix bits have been consumed.
(OP_EM, OP_EX): Provide some default handling for generating pointer
specifications.
bfd/
* elf32-arm.h: Support EABI version 4 objects.
binutils/
* readelf.c (decode_ARM_machine_flags): Support EABI version 4.
gas/
* config/tc-arm.c (md_begin): Change EF_ARM_EABI_VER3 to
EF_ARM_EABI_VER4.
(arm_eabis): Ditto.
* doc/c-arm.texi: Document that we actually support -meabi=4, not
-meabi=3.
include/
* elf/arm.h (EF_ARM_EABI_VER4): Define.
* config.bfd: Include 64-bit support for i[3-7]86-*-solaris2*.
* elf64-x86-64.c (elf64_x86_64_section_from_shdr): New function.
(elf_backend_section_from_shdr): Define.
binutils/
* readelf.c (get_x86_64_section_type_name): New function.
(get_section_type_name): Use it.
gas/
* config/tc-i386.c: Include "elf/x86-64.h".
(i386_elf_section_type): New function.
* config/tc-i386.h (md_elf_section_type): Define.
(i386_elf_section_type): New prototype.
gas/testsuite/
* gas/i386/i386.exp: Don't run divide test for targets where '/'
is a comment. Run x86-64-unwind for 64-bit ELF targets.
* gas/i386/x86-64-unwind.d, gas/i386/x86-64-unwind.s: New.
include/
* elf/common.h (PT_SUNW_EH_FRAME): Define.
* elf/x86-64.h (SHT_X86_64_UNWIND): Define.
ld/
* configure.tgt: Include elf_x86_64 for i[3-7]86-*-solaris2*.
* elf32-xtensa.c (elf32xtensa_size_opt): New global variable.
(xtensa_default_isa): Global variable moved here from xtensa-isa.c.
(elf32xtensa_no_literal_movement): New global variable.
(elf_howto_table): Add entries for new relocations.
(elf_xtensa_reloc_type_lookup): Handle new relocations.
(property_table_compare): When addresses are equal, compare sizes and
various property flags.
(property_table_matches): New.
(xtensa_read_table_entries): Extend to read new property tables. Add
output_addr parameter to indicate that output addresses should be used.
Use bfd_get_section_limit.
(elf_xtensa_find_property_entry): New.
(elf_xtensa_in_literal_pool): Use elf_xtensa_find_property_entry.
(elf_xtensa_check_relocs): Handle new relocations.
(elf_xtensa_do_reloc): Use bfd_get_section_limit. Handle new
relocations. Use new xtensa-isa.h functions.
(build_encoding_error_message): Remove encode_result parameter. Add
new target_address parameter used to detect alignment errors.
(elf_xtensa_relocate_section): Use bfd_get_section_limit. Clean up
error handling. Use new is_operand_relocation function.
(elf_xtensa_combine_prop_entries, elf_xtensa_merge_private_bfd_data):
Use underbar macro for error messages. Formatting.
(get_const16_opcode): New.
(get_l32r_opcode): Add a separate flag for initialization.
(get_relocation_opnd): Operand number is no longer explicit in the
relocation. Change to decode the opcode and analyze its operands.
(get_relocation_slot): New.
(get_relocation_opcode): Add bfd parameter. Use bfd_get_section_limit.
Use new xtensa-isa.h functions to handle multislot instructions.
(is_l32r_relocation): Add bfd parameter. Use is_operand_relocation.
(get_asm_simplify_size, is_alt_relocation, is_operand_relocation,
insn_decode_len, insn_decode_opcode, check_branch_target_aligned,
check_loop_aligned, check_branch_target_aligned_address, narrowable,
widenable, narrow_instruction, widen_instruction, op_single_fmt_table,
get_single_format, init_op_single_format_table): New.
(elf_xtensa_do_asm_simplify): Add error_message parameter and use it
instead of calling _bfd_error_handler. Use new xtensa-isa.h functions.
(contract_asm_expansion): Add error_message parameter and pass it to
elf_xtensa_do_asm_simplify. Replace use of R_XTENSA_OP0 relocation
with R_XTENSA_SLOT0_OP.
(get_expanded_call_opcode): Extend to handle either L32R or CONST16
instructions. Use new xtensa-isa.h functions.
(r_reloc struct): Add new virtual_offset field.
(r_reloc_init): Add contents and content_length parameters. Set
virtual_offset field to zero. Add contents to target_offset field for
partial_inplace relocations.
(r_reloc_is_defined): Check for null.
(print_r_reloc): New debug function.
(source_reloc struct): Replace xtensa_operand field with pair of the
opcode and the operand position. Add is_abs_literal field.
(init_source_reloc): Specify operand by opcode/position pair. Set
is_abs_literal field.
(source_reloc_compare): When target_offsets are equal, compare other
fields to make sorting predictable.
(literal_value struct): Add is_abs_literal field.
(value_map_hash_table struct): Add has_last_loc and last_loc fields.
(init_literal_value): New.
(is_same_value): Replace with ...
(literal_value_equal): ... this function. Add comparisons of
virtual_offset and is_abs_literal fields.
(value_map_hash_table_init): Use bfd_zmalloc. Check for allocation
failure. Initialize has_last_loc field.
(value_map_hash_table_delete): New.
(hash_literal_value): Rename to ...
(literal_value_hash): ... this. Include is_abs_literal flag and
virtual_offset field in the hash value.
(get_cached_value): Rename to ...
(value_map_get_cached_value): ... this. Update calls to
literal_value_hash and literal_value_equal.
(add_value_map): Check for allocation failure. Update calls to
value_map_get_cached_value and literal_value_hash.
(text_action, text_action_list, text_action_t): New types.
(find_fill_action, compute_removed_action_diff, adjust_fill_action,
text_action_add, text_action_add_literal, offset_with_removed_text,
offset_with_removed_text_before_fill, find_insn_action,
print_action_list, print_removed_literals): New.
(offset_with_removed_literals): Delete.
(xtensa_relax_info struct): Add is_relaxable_asm_section, action_list,
fix_array, fix_array_count, allocated_relocs, relocs_count, and
allocated_relocs_count fields.
(init_xtensa_relax_info): Initialize new fields.
(reloc_bfd_fix struct): Add new translated field.
(reloc_bfd_fix_init): Add translated parameter and use it to set the
translated field.
(fix_compare, cache_fix_array): New.
(get_bfd_fix): Remove fix_list parameter and get all relax_info for the
section via get_xtensa_relax_info. Use cache_fix_array to set up
sorted fix_array and use bsearch instead of linear search.
(section_cache_t): New struct.
(init_section_cache, section_cache_section, clear_section_cache): New.
(ebb_t, ebb_target_enum, proposed_action, ebb_constraint): New types.
(init_ebb_constraint, free_ebb_constraint, init_ebb, extend_ebb_bounds,
extend_ebb_bounds_forward, extend_ebb_bounds_backward,
insn_block_decodable_len, ebb_propose_action, ebb_add_proposed_action):
New.
(retrieve_contents): Use bfd_get_section_limit.
(elf_xtensa_relax_section): Add relocations_analyzed flag. Update call
to compute_removed_literals. Free value_map_hash_table when no longer
needed.
(analyze_relocations): Check is_relaxable_asm_section flag. Call
compute_text_actions for all sections.
(find_relaxable_sections): Mark sections as relaxable if they contain
ASM_EXPAND relocations that can be optimized. Adjust r_reloc_init
call. Increment relax_info src_count field only for appropriate
relocation types. Remove is_literal_section check.
(collect_source_relocs): Use bfd_get_section_limit. Adjust calls to
r_reloc_init and find_associated_l32r_irel. Check
is_relaxable_asm_section flag. Handle L32R instructions with absolute
literals. Pass is_abs_literal flag to init_source_reloc.
(is_resolvable_asm_expansion): Use bfd_get_section_limit. Check for
CONST16 instructions. Adjust calls to r_reloc_init and
pcrel_reloc_fits. Handle weak symbols conservatively.
(find_associated_l32r_irel): Add bfd parameter and pass it to
is_l32r_relocation.
(compute_text_actions, compute_ebb_proposed_actions,
compute_ebb_actions, check_section_ebb_pcrels_fit,
check_section_ebb_reduces, text_action_add_proposed,
compute_fill_extra_space): New.
(remove_literals): Replace with ...
(compute_removed_literals): ... this function. Call
init_section_cache. Use bfd_get_section_limit. Sort internal_relocs.
Call xtensa_read_table_entries to get the property table. Skip
relocations other than R_XTENSA_32 and R_XTENSA_PLT. Use new
is_removable_literal, remove_dead_literal, and
identify_literal_placement functions.
(get_irel_at_offset): Rewrite to use bsearch on sorted relocations
instead of linear search.
(is_removable_literal, remove_dead_literal,
identify_literal_placement): New.
(relocations_reach): Update check for literal not referenced by any
PC-relative relocations. Adjust call to pcrel_reloc_fits.
(coalesce_shared_literal, move_shared_literal): New.
(relax_section): Use bfd_get_section_limit. Call
translate_section_fixes. Update calls to r_reloc_init and
offset_with_removed_text. Check new is_relaxable_asm_section flag.
Add call to pin_internal_relocs. Add special handling for
R_XTENSA_ASM_SIMPLIFY and R_XTENSA_DIFF* relocs. Use virtual_offset
info to calculate new addend_displacement variable. Replace code for
deleting literals with more general code to perform the actions
determined by the action_list for the section.
(translate_section_fixes, translate_reloc_bfd_fix): New.
(translate_reloc): Check new is_relaxable_asm_section flag. Call
find_removed_literal only if is_operand_relocation. Update call to
offset_with_removed_text. Use new target_offset and removed_bytes
variables.
(move_literal): New.
(relax_property_section): Use bfd_get_section_limit. Set new
is_full_prop_section flag and handle new property tables. Update calls
to r_reloc_init and offset_with_removed_text. Check
is_relaxable_asm_section flag. Handle expansion of zero-sized
unreachable entries, with use of offset_with_removed_text_before_fill.
For relocatable links, combine entries only for literal tables.
(relax_section_symbols): Check is_relaxable_asm_section flag. Update
calls to offset_with_removed_text. Translate st_size field for
function symbols.
(do_fix_for_relocatable_link): Change to return bfd_boolean to indicate
failure. Add contents parameter. Update call to get_bfd_fix. Update
call to r_reloc_init. Call _bfd_error_handler and return FALSE for
R_XTENSA_ASM_EXPAND relocs.
(do_fix_for_final_link): Add input_bfd and contents parameters. Update
call to get_bfd_fix. Include offset from contents for partial_inplace
relocations.
(is_reloc_sym_weak): New.
(pcrel_reloc_fits): Use new xtensa-isa.h functions.
(prop_sec_len): New.
(xtensa_is_property_section): Handle new property sections.
(is_literal_section): Delete.
(internal_reloc_compare): When r_offset matches, compare r_info and
r_addend to make sorting predictable.
(internal_reloc_matches): New.
(xtensa_get_property_section_name): Handle new property sections.
(xtensa_get_property_predef_flags): New.
(xtensa_callback_required_dependence): Use bfd_get_section_limit.
Update calls to xtensa_isa_init, is_l32r_relocation, and r_reloc_init.
* xtensa-isa.c (xtensa_default_isa): Moved to elf32-xtensa.c.
(xtisa_errno, xtisa_error_msg): New variables.
(xtensa_isa_errno, xtensa_isa_error_msg): New.
(xtensa_insnbuf_alloc): Add error handling.
(xtensa_insnbuf_to_chars): Add num_chars parameter. Update to
use xtensa_format_decode. Add error handling.
(xtensa_insnbuf_from_chars): Add num_chars parameter. Decode the
instruction length to find the number of bytes to copy.
(xtensa_isa_init): Add error handling. Replace calls to
xtensa_load_isa and xtensa_extend_isa with code to initialize lookup
tables in the xtensa_modules structure.
(xtensa_check_isa_config, xtensa_add_isa, xtensa_load_isa,
xtensa_extend_isa): Delete.
(xtensa_isa_free): Change to only free lookup tables.
(opname_lookup_compare): Replace with ...
(xtensa_isa_name_compare): ... this function. Use strcasecmp.
(xtensa_insn_maxlength): Rename to ...
(xtensa_isa_maxlength): ... this.
(xtensa_insn_length): Delete.
(xtensa_insn_length_from_first_byte): Replace with ...
(xtensa_isa_length_from_chars): ... this function.
(xtensa_num_opcodes): Rename to ...
(xtensa_isa_num_opcodes): ... this.
(xtensa_isa_num_pipe_stages, xtensa_isa_num_formats,
xtensa_isa_num_regfiles, xtensa_isa_num_stages,
xtensa_isa_num_sysregs, xtensa_isa_num_interfaces,
xtensa_isa_num_funcUnits, xtensa_format_name, xtensa_format_lookup,
xtensa_format_decode, xtensa_format_encode, xtensa_format_length,
xtensa_format_num_slots, xtensa_format_slot_nop_opcode,
xtensa_format_get_slot, xtensa_format_set_slot): New functions.
(xtensa_opcode_lookup): Add error handling.
(xtensa_decode_insn): Replace with ...
(xtensa_opcode_decode): ... this function, with new format and
slot parameters. Add error handling.
(xtensa_encode_insn): Replace with ...
(xtensa_opcode_encode): ... this function, which does the encoding via
one of the entries in the "encode_fns" array. Add error handling.
(xtensa_opcode_name): Add error handling.
(xtensa_opcode_is_branch, xtensa_opcode_is_jump, xtensa_opcode_is_loop,
xtensa_opcode_is_call): New.
(xtensa_num_operands): Replace with ...
(xtensa_opcode_num_operands): ... this function. Add error handling.
(xtensa_opcode_num_stateOperands,
xtensa_opcode_num_interfaceOperands, xtensa_opcode_num_funcUnit_uses,
xtensa_opcode_funcUnit_use, xtensa_operand_name,
xtensa_operand_is_visible): New.
(xtensa_get_operand, xtensa_operand_kind): Delete.
(xtensa_operand_inout): Add error handling and special-case for
"sout" operands.
(xtensa_operand_get_field, xtensa_operand_set_field): Rewritten to
operate on one slot of an instruction. Added error handling.
(xtensa_operand_encode): Handle default operands with no encoding
functions. Check for success by comparing against decoded value.
Add error handling.
(xtensa_operand_decode): Handle default operands. Return decoded value
through argument pointer. Add error handling.
(xtensa_operand_is_register, xtensa_operand_regfile,
xtensa_operand_num_regs, xtensa_operand_is_known_reg): New.
(xtensa_operand_isPCRelative): Rename to ...
(xtensa_operand_is_PCrelative): ... this. Add error handling.
(xtensa_operand_do_reloc, xtensa_operand_undo_reloc): Return value
through argument pointer. Add error handling.
(xtensa_stateOperand_state, xtensa_stateOperand_inout,
xtensa_interfaceOperand_interface, xtensa_regfile_lookup,
xtensa_regfile_lookup_shortname, xtensa_regfile_name,
xtensa_regfile_shortname, xtensa_regfile_view_parent,
xtensa_regfile_num_bits, xtensa_regfile_num_entries,
xtensa_state_lookup, xtensa_state_name, xtensa_state_num_bits,
xtensa_state_is_exported, xtensa_sysreg_lookup,
xtensa_sysreg_lookup_name, xtensa_sysreg_name, xtensa_sysreg_number,
xtensa_sysreg_is_user, xtensa_interface_lookup, xtensa_interface_name,
xtensa_interface_num_bits, xtensa_interface_inout,
xtensa_interface_has_side_effect, xtensa_funcUnit_lookup,
xtensa_funcUnit_name, xtensa_funcUnit_num_copies): New.
* xtensa-modules.c: Rewrite to use new data structures.
* reloc.c (BFD_RELOC_XTENSA_DIFF8, BFD_RELOC_XTENSA_DIFF16,
BFD_RELOC_XTENSA_DIFF32, BFD_RELOC_XTENSA_SLOT0_OP,
BFD_RELOC_XTENSA_SLOT1_OP, BFD_RELOC_XTENSA_SLOT2_OP,
BFD_RELOC_XTENSA_SLOT3_OP, BFD_RELOC_XTENSA_SLOT4_OP,
BFD_RELOC_XTENSA_SLOT5_OP, BFD_RELOC_XTENSA_SLOT6_OP,
BFD_RELOC_XTENSA_SLOT7_OP, BFD_RELOC_XTENSA_SLOT8_OP,
BFD_RELOC_XTENSA_SLOT9_OP, BFD_RELOC_XTENSA_SLOT10_OP,
BFD_RELOC_XTENSA_SLOT11_OP, BFD_RELOC_XTENSA_SLOT12_OP,
BFD_RELOC_XTENSA_SLOT13_OP, BFD_RELOC_XTENSA_SLOT14_OP,
BFD_RELOC_XTENSA_SLOT0_ALT, BFD_RELOC_XTENSA_SLOT1_ALT,
BFD_RELOC_XTENSA_SLOT2_ALT, BFD_RELOC_XTENSA_SLOT3_ALT,
BFD_RELOC_XTENSA_SLOT4_ALT, BFD_RELOC_XTENSA_SLOT5_ALT,
BFD_RELOC_XTENSA_SLOT6_ALT, BFD_RELOC_XTENSA_SLOT7_ALT,
BFD_RELOC_XTENSA_SLOT8_ALT, BFD_RELOC_XTENSA_SLOT9_ALT,
BFD_RELOC_XTENSA_SLOT10_ALT, BFD_RELOC_XTENSA_SLOT11_ALT,
BFD_RELOC_XTENSA_SLOT12_ALT, BFD_RELOC_XTENSA_SLOT13_ALT,
BFD_RELOC_XTENSA_SLOT14_ALT): Add new relocations.
* Makefile.am (xtensa-isa.lo, xtensa-modules.lo): Update dependencies.
* Makefile.in: Regenerate.
* bfd-in2.h: Likewise.
* libbfd.h: Likewise.
gas ChangeLog
* config/tc-xtensa.c (absolute_literals_supported): New global flag.
(UNREACHABLE_MAX_WIDTH): Define.
(XTENSA_FETCH_WIDTH): Delete.
(cur_vinsn, xtensa_fetch_width, xt_saved_debug_type, past_xtensa_end,
prefer_const16, prefer_l32r): New global variables.
(LIT4_SECTION_NAME): Define.
(lit4_state struct): Add lit4_seg_name and lit4_seg fields.
(XTENSA_PROP_*, GET_XTENSA_PROP_*, SET_XTENSA_PROP_*): Define.
(frag_flags struct): New.
(xtensa_block_info struct): Move from tc-xtensa.h. Add flags field.
(subseg_map struct): Add cur_total_freq and cur_target_freq fields.
(bitfield, bit_is_set, set_bit, clear_bit): Define.
(MAX_FORMATS): Define.
(op_placement_info struct, op_placement_table): New.
(O_pltrel, O_hi16, O_lo16): Define.
(directiveE enum): Rename directive_generics to directive_transform.
Delete directive_relax. Add directive_schedule,
directive_absolute_literals, and directive_last_directive.
(directive_info): Rename "generics" to "transform". Delete "relax".
Add "schedule" and "absolute-literals".
(directive_state): Adjust entries to match changes in directive_info.
(xtensa_relax_statesE, RELAX_IMMED_MAXSTEPS): Move to tc-xtensa.h.
(xtensa_const16_opcode, xtensa_movi_opcode, xtensa_movi_n_opcode,
xtensa_l32r_opcode, xtensa_nop_opcode, xtensa_rsr_lcount_opcode): New.
(xtensa_j_opcode, xtensa_rsr_opcode): Delete.
(align_only_targets, software_a0_b_retw_interlock,
software_avoid_b_j_loop_end, maybe_has_b_j_loop_end,
software_avoid_short_loop, software_avoid_close_loop_end,
software_avoid_all_short_loops, specific_opcode): Delete.
(warn_unaligned_branch_targets): New.
(workaround_a0_b_retw, workaround_b_j_loop_end, workaround_short_loop,
workaround_close_loop_end, workaround_all_short_loops): Default FALSE.
(option_[no_]link_relax, option_[no_]transform,
option_[no_]absolute_literals, option_warn_unaligned_targets,
option_prefer_l32r, option_prefer_const16, option_target_hardware):
New enum values.
(option_[no_]align_only_targets, option_literal_section_name,
option_text_section_name, option_data_section_name,
option_bss_section_name, option_eb, option_el): Delete.
(md_longopts): Add entries for: [no-]transform, [no-]absolute-literals,
warn-unaligned-targets, prefer-l32r, prefer-const16, [no-]link-relax,
and target-hardware. Delete entries for [no-]target-align-only,
literal-section-name, text-section-name, data-section-name, and
bss-section-name.
(md_parse_option): Handle new options and remove old ones. Accept but
ignore [no-]density options. Warn for [no-]generics and [no-]relax
and treat them as [no-]transform.
(md_show_usage): Add new options and remove old ones.
(xtensa_setup_hw_workarounds): New.
(md_pseudo_table): Change "word" entry to use xtensa_elf_cons. Add
"long", "short", "loc" and "frequency" entries.
(use_generics): Rename to ...
(use_transform): ... this function. Add past_xtensa_end check.
(use_longcalls): Add past_xtensa_end check.
(code_density_available, can_relax): Delete.
(do_align_targets): New.
(get_directive): Accept dashes in directive names. Warn about
[no-]generics and [no-]relax directives and treat them as
[no-]transform.
(xtensa_begin_directive): Call md_flush_pending_output only for some
directives. Check for directives inside instruction bundles. Warn
about deprecated ".begin literal" usage. Warn and ignore [no-]density
directives. Handle new directives. Check generating_literals flag
for literal_prefix.
(xtensa_end_directive): Check for directives inside instruction
bundles. Warn and ignore [no-]density directives. Handle new
directives. Call xtensa_set_frag_assembly_state.
(xtensa_loc_directive_seen, xtensa_dwarf2_directive_loc,
xtensa_dwarf2_emit_insn): New.
(xtensa_literal_position): Call md_flush_pending_output. Do not check
use_literal_section flag.
(xtensa_literal_pseudo): Call md_flush_pending_output. Handle absolute
literals. Use xtensa_elf_cons to parse the expression.
(xtensa_literal_prefix): Do not check use_literal_section. Support
".lit4" sections for absolute literals. Change prefix convention to
replace ".text" (or ".t" in a linkonce section). No need to call
subseg_set.
(xtensa_frequency_pseudo, xtensa_elf_cons, xtensa_elf_suffix): New.
(expression_end): Handle closing braces and colons.
(PLT_SUFFIX, plt_suffix): Delete.
(expression_maybe_register): Use new xtensa-isa.h functions. Use
xtensa_elf_suffix instead of checking for plt suffix, and handle O_lo16
and O_hi16 expressions as well.
(tokenize_arguments): Handle closing braces and colons.
(parse_arguments): Use new xtensa-isa.h functions. Handle "invisible"
operands and paired register syntax.
(get_invisible_operands): New.
(xg_translate_sysreg_op): Handle new Xtensa LX RSR/WSR/XSR syntax. Use
new xtensa-isa.h functions.
(xtensa_translate_old_userreg_ops, xtensa_translate_zero_immed): New.
(xg_translate_idioms): Check if inside bundle. Use use_transform.
Handle new Xtensa LX RSR/WSR/XSR syntax. Remove code to widen density
instructions. Use xtensa_translate_zero_immed.
(operand_is_immed, operand_is_pcrel_label): Delete.
(get_relaxable_immed): Use new xtensa-isa.h functions.
(get_opcode_from_buf): Add slot parameter. Use new xtensa-isa.h
functions.
(xtensa_print_insn_table, print_vliw_insn): New.
(is_direct_call_opcode): Use new xtensa-isa.h functions.
(is_call_opcode, is_loop_opcode, is_conditional_branch_opcode,
is_branch_or_jump_opcode): Delete.
(is_movi_opcode, decode_reloc, encode_reloc, encode_alt_reloc): New.
(opnum_to_reloc, reloc_to_opnum): Delete.
(xtensa_insnbuf_set_operand, xtensa_insnbuf_get_operand): Use new
xtensa-isa.h functions. Operate on one slot of an instruction.
(xtensa_insnbuf_set_immediate_field, is_negatable_branch,
xg_get_insn_size): Delete.
(xg_get_build_instr_size): Use xg_get_single_size.
(xg_is_narrow_insn, xg_is_single_relaxable_insn): Update calls to
xg_build_widen_table. Use xg_get_single_size.
(xg_get_max_narrow_insn_size): Delete.
(xg_get_max_insn_widen_size, xg_get_max_insn_widen_literal_size,
xg_is_relaxable_insn): Update calls to xg_build_widen_table. Use
xg_get_single_size.
(xg_build_to_insn): Record the loc field. Handle OP_OPERAND_HI16U and
OP_OPERAND_LOW16U. Check xg_valid_literal_expression.
(xg_expand_to_stack, xg_expand_narrow): Update calls to
xg_build_widen_table. Use xg_get_single_size.
(xg_immeds_fit): Use new xtensa-isa.h functions. Update call to
xg_check_operand.
(xg_symbolic_immeds_fit): Likewise. Also handle O_lo16 and O_hi16, and
treat weak symbols conservatively.
(xg_check_operand): Use new xtensa-isa.h functions.
(is_dnrange): Delete.
(xg_assembly_relax): Inline previous calls to tinsn_copy.
(xg_finish_frag): Specify separate relax states for the frag and slot0.
(is_branch_jmp_to_next, xg_add_branch_and_loop_targets): Use new
xtensa-isa.h functions.
(xg_instruction_matches_option_term, xg_instruction_matches_or_options,
xg_instruction_matches_options): New.
(xg_instruction_matches_rule): Handle O_register expressions. Call
xg_instruction_matches_options.
(transition_rule_cmp): New.
(xg_instruction_match): Update call to xg_build_simplify_table.
(xg_build_token_insn): Record loc fields.
(xg_simplify_insn): Check is_specific_opcode field and
density_supported flag.
(xg_expand_assembly_insn): Skip checking code_density_available. Use
new xtensa-isa.h functions. Call use_transform instead of can_relax.
(xg_assemble_literal): Add error handling for O_big. Call
record_alignment. Handle O_pltrel.
(xg_valid_literal_expression): New.
(xg_assemble_literal_space): Add slot parameter. Remove call to
set_expr_symbol_offset. Add call to record_alignment. Update call to
xg_finish_frag.
(xg_emit_insn): Delete.
(xg_emit_insn_to_buf): Add format parameter. Update calls to
xg_add_opcode_fix and xtensa_insnbuf_to_chars.
(xg_add_opcode_fix): Change opcode parameter to tinsn and add format
and slot parameters. Handle new "alternate" relocations for absolute
literals and CONST16 instructions. Check for bad uses of O_lo16 and
O_hi16. Use new xtensa-isa.h functions.
(xg_assemble_tokens): Delete.
(is_register_writer): Use new xtensa-isa.h functions.
(is_bad_loopend_opcode): Check for xtensa_rsr_lcount_opcode instead of
old-style RSR from LCOUNT.
(next_frag_opcode): Delete.
(next_frag_opcode_is_loop, next_frag_format_size, frag_format_size,
update_next_frag_state): New.
(update_next_frag_nop_state): Delete.
(next_frag_pre_opcode_bytes): Use next_frag_opcode_is_loop.
(xtensa_mark_literal_pool_location): Check use_literal_section flag and
the state of the absolute-literals directive. Add calls to
record_alignment and xtensa_set_frag_assembly_state. Call
xtensa_switch_to_non_abs_literal_fragment instead of
xtensa_switch_to_literal_fragment.
(build_nop): New.
(assemble_nop): Use build_nop. Update call to xtensa_insnbuf_to_chars.
(get_expanded_loop_offset): Change check for undefined opcode to an
assertion.
(xtensa_set_frag_assembly_state, relaxable_section,
xtensa_find_unmarked_state_frags, xtensa_find_unaligned_branch_targets,
xtensa_find_unaligned_loops, xg_apply_tentative_value): New.
(md_begin): Update call to xtensa_isa_init. Initialize linkrelax to 1.
Set lit4_seg_name. Call xg_init_vinsn. Initialize new global opcodes.
Call init_op_placement_info_table and xtensa_set_frag_assembly_state.
(xtensa_init_fix_data): New.
(xtensa_frob_label): Reset label symbol to the current frag. Check
do_align_targets and generating_literals flag. Propagate frequency
info to new alignment frag. Call xtensa_set_frag_assembly_state.
(xtensa_unrecognized_line): New.
(xtensa_flush_pending_output): Check if inside a bundle. Add a call
to xtensa_set_frag_assembly_state.
(error_reset_cur_vinsn): New.
(md_assemble): Remove check for literal frag. Remove call to
istack_init. Call use_transform instead of use_generics. Parse
explicit instruction format specifiers. Move code for
a0_b_retw_interlock workaround to xg_assemble_vliw_tokens. Call
error_reset_cur_vinsn on errors. Add call to get_invisible_operands.
Add dwarf2_where call. Remote automatic alignment for ENTRY
instructions. Move call to xtensa_clear_insn_labels to the end.
Rearrange to handle bundles.
(xtensa_cons_fix_new): Delete.
(xtensa_handle_align): New.
(xtensa_frag_init): Call xtensa_set_frag_assembly_state. Remove
assignment to is_no_density field.
(md_pcrel_from): Use new xtensa-isa.h functions. Use decode_reloc
instead of reloc_to_opnum. Handle "alternate" relocations.
(xtensa_force_relocation, xtensa_check_inside_bundle,
xtensa_elf_section_change_hook): New.
(xtensa_symbol_new_hook): Delete.
(xtensa_fix_adjustable): Check for difference of symbols with an
offset. Check for external and weak symbols.
(md_apply_fix3): Remove cases for XTENSA_OP{0,1,2} relocs.
(md_estimate_size_before_relax): Return expansion for the first slot.
(tc_gen_reloc): Handle difference of symbols by producing
XTENSA_DIFF{8,16,32} relocs and by writing the value of the difference
into the output. Handle new XTENSA_SLOT*_OP relocs by storing the
tentative values into the output when linkrelax is set.
(XTENSA_PROP_SEC_NAME): Define.
(xtensa_post_relax_hook): Call xtensa_find_unmarked_state_frags.
Create literal tables only if using literal sections. Create new
property tables instead of old instruction tables. Check for unaligned
branch targets and loops.
(finish_vinsn, find_vinsn_conflicts, check_t1_t2_reads_and_writes,
new_resource_table, clear_resource_table, resize_resource_table,
resources_available, reserve_resources, release_resources,
opcode_funcUnit_use_unit, opcode_funcUnit_use_stage,
resources_conflict, xg_find_narrowest_format, relaxation_requirements,
bundle_single_op, emit_single_op, xg_assemble_vliw_tokens): New.
(xtensa_end): Call xtensa_flush_pending_output. Set past_xtensa_end
flag. Update checks for workaround options. Call
xtensa_mark_narrow_branches and xtensa_mark_zcl_first_insns.
(xtensa_cleanup_align_frags): Add special case for branch targets.
Check for and mark unreachable frags.
(xtensa_fix_target_frags): Remove use of align_only_targets flag.
Use RELAX_LOOP_END_BYTES in special case for negatable branch at the
end of a zero-overhead loop body.
(frag_can_negate_branch): Handle instructions with multiple slots.
Use new xtensa-isa.h functions
(xtensa_mark_narrow_branches, is_narrow_branch_guaranteed_in_range,
xtensa_mark_zcl_first_insns): New.
(xtensa_fix_a0_b_retw_frags, xtensa_fix_b_j_loop_end_frags): Error if
transformations are disabled.
(next_instrs_are_b_retw): Use new xtensa-isa.h functions. Handle
multislot instructions.
(xtensa_fix_close_loop_end_frags, xtensa_fix_short_loop_frags):
Likewise. Also error if transformations are disabled.
(unrelaxed_frag_max_size): New.
(unrelaxed_frag_min_insn_count, unrelax_frag_has_b_j): Use new
xtensa-isa.h functions.
(xtensa_sanity_check, is_empty_loop, is_local_forward_loop): Use
xtensa_opcode_is_loop instead of is_loop_opcode.
(get_text_align_power): Replace as_fatal with assertion.
(get_text_align_fill_size): Iterate instead of using modulus when
use_nops is false.
(get_noop_aligned_address): Assert that this is for a machine-dependent
RELAX_ALIGN_NEXT_OPCODE frag. Use next_frag_opcode_is_loop,
xg_get_single_size, and frag_format_size.
(get_widen_aligned_address): Rename to ...
(get_aligned_diff): ... this function. Add max_diff parameter.
Remove handling of rs_align/rs_align_code frags. Use
next_frag_format_size, get_text_align_power, get_text_align_fill_size,
next_frag_opcode_is_loop, and xg_get_single_size. Compute max_diff
and pass it back to caller.
(xtensa_relax_frag): Use relax_frag_loop_align. Add code for new
RELAX_SLOTS, RELAX_MAYBE_UNREACHABLE, RELAX_MAYBE_DESIRE_ALIGN,
RELAX_FILL_NOP, and RELAX_UNREACHABLE frag types. Check relax_seen.
(relax_frag_text_align): Rename to ...
(relax_frag_loop_align): ... this function. Assume loops can only be
in the first slot of an instruction.
(relax_frag_add_nop): Use assemble_nop instead of constructing an OR
instruction. Remove call to frag_wane.
(relax_frag_narrow): Rename to ...
(relax_frag_for_align): ... this function. Extend to handle
RELAX_FILL_NOP and RELAX_UNREACHABLE, as well as RELAX_SLOTS with
RELAX_NARROW for the first slot.
(find_address_of_next_align_frag, bytes_to_stretch): New.
(future_alignment_required): Use find_address_of_next_align_frag and
bytes_to_stretch. Look ahead to subsequent frags to make smarter
alignment decisions.
(relax_frag_immed): Add format, slot, and estimate_only parameters.
Check if transformations are enabled for b_j_loop_end workaround.
Use new xtensa-isa.h functions and handle multislot instructions.
Update call to xg_assembly_relax.
(md_convert_frag): Handle new RELAX_SLOTS, RELAX_UNREACHABLE,
RELAX_MAYBE_UNREACHABLE, RELAX_MAYBE_DESIRE_ALIGN, and RELAX_FILL_NOP
frag types.
(convert_frag_narrow): Add segP, format and slot parameters. Call
convert_frag_immed for branch instructions. Adjust calls to
tinsn_from_chars, tinsn_immed_from_frag, and xg_emit_insn_to_buf. Use
xg_get_single_size and xg_get_single_format.
(convert_frag_fill_nop): New.
(convert_frag_immed): Add format and slot parameters. Handle multislot
instructions and use new xtensa-isa.h functions. Update calls to
tinsn_immed_from_frag and xg_assembly_relax. Check if transformations
enabled for b_j_loop_end workaround. Use build_nop instead of
assemble_nop. Check is_specific_opcode flag. Check for unreachable
frags. Use xg_get_single_size. Handle O_pltrel.
(fix_new_exp_in_seg): Remove check for old plt flag.
(convert_frag_immed_finish_loop): Update calls to tinsn_from_chars and
xtensa_insnbuf_to_chars. Call tinsn_immed_from_frag. Change check
for loop opcode to an assertion. Mark all frags up to the end of the
loop as not transformable.
(get_last_insn_flags, set_last_insn_flags): Use get_subseg_info.
(get_subseg_info): New.
(xtensa_move_literals): Call xtensa_set_frag_assembly_state. Add null
check for dest_seg.
(xtensa_switch_to_literal_fragment): Rewrite to handle absolute
literals and use xtensa_switch_to_non_abs_literal_fragment otherwise.
(xtensa_switch_to_non_abs_literal_fragment): New.
(cache_literal_section): Add is_code parameter and pass it through to
retrieve_literal_seg.
(retrieve_literal_seg): Add is_code parameter and use it to set the
flags on the literal section. Handle case where head parameter is 0.
(get_frag_is_no_transform, set_frag_is_specific_opcode,
set_frag_is_no_transform): New.
(xtensa_create_property_segments): Add end_property_function parameter
and pass it through to add_xt_block_frags. Call bfd_get_section_flags
and skip SEC_DEBUGGING and !SEC_ALLOC sections.
(xtensa_create_xproperty_segments, section_has_xproperty): New.
(add_xt_block_frags): Add end_property_function parameter and call it
if it is non-zero. Call xtensa_frag_flags_init.
(xtensa_frag_flags_is_empty, xtensa_frag_flags_init,
get_frag_property_flags, frag_flags_to_number,
xtensa_frag_flags_combinable, xt_block_aligned_size,
xtensa_xt_block_combine, add_xt_prop_frags,
init_op_placement_info_table, opcode_fits_format_slot,
xg_get_single_size, xg_get_single_format): New.
(istack_push): Inline call to tinsn_copy.
(tinsn_copy): Delete.
(tinsn_has_invalid_symbolic_operands): Handle O_hi16 and O_lo16 and
CONST16 opcodes. Handle O_big, O_illegal, and O_absent.
(tinsn_has_complex_operands): Handle O_hi16 and O_lo16.
(tinsn_to_insnbuf): Use xg_get_single_format and new xtensa-isa.h
functions. Handle invisible operands.
(tinsn_to_slotbuf): New.
(tinsn_check_arguments): Use new xtensa-isa.h functions.
(tinsn_from_chars): Add slot parameter. Rewrite using xg_init_vinsn,
vinsn_from_chars, and xg_free_vinsn.
(tinsn_from_insnbuf): New.
(tinsn_immed_from_frag): Add slot parameter and handle multislot
instructions. Handle symbol differences.
(get_num_stack_text_bytes): Use xg_get_single_size.
(xg_init_vinsn, xg_clear_vinsn, vinsn_has_specific_opcodes,
xg_free_vinsn, vinsn_to_insnbuf, vinsn_from_chars, expr_is_register,
get_expr_register, set_expr_symbol_offset_diff): New.
* config/tc-xtensa.h (MAX_SLOTS): Define.
(xtensa_relax_statesE): Move from tc-xtensa.c. Add
RELAX_CHECK_ALIGN_NEXT_OPCODE, RELAX_MAYBE_DESIRE_ALIGN, RELAX_SLOTS,
RELAX_FILL_NOP, RELAX_UNREACHABLE, RELAX_MAYBE_UNREACHABLE, and
RELAX_NONE types.
(RELAX_IMMED_MAXSTEPS): Move from tc-xtensa.c.
(xtensa_frag_type struct): Add is_assembly_state_set,
use_absolute_literals, relax_seen, is_unreachable, is_specific_opcode,
is_align, is_text_align, alignment, and is_first_loop_insn fields.
Replace is_generics and is_relax fields by is_no_transform field.
Delete is_text and is_longcalls fields. Change text_expansion and
literal_expansion to arrays of MAX_SLOTS entries. Add arrays of
per-slot information: literal_frags, slot_subtypes, slot_symbols,
slot_sub_symbols, and slot_offsets. Add fr_prev field.
(xtensa_fix_data struct): New.
(xtensa_symfield_type struct): Delete plt field.
(xtensa_block_info struct): Move definition to tc-xtensa.h. Add
forward declaration here.
(xt_section_type enum): Delete xt_insn_sec. Add xt_prop_sec.
(XTENSA_SECTION_RENAME): Undefine.
(TC_FIX_TYPE, TC_INIT_FIX_DATA, TC_FORCE_RELOCATION, NO_PSEUDO_DOT,
tc_unrecognized_line, md_do_align, md_elf_section_change_hook,
HANDLE_ALIGN, TC_LINKRELAX_FIXUP, SUB_SEGMENT_ALIGN): Define.
(TC_CONS_FIX_NEW, tc_symbol_new_hook): Delete.
(unit_num_copies_func, opcode_num_units_func,
opcode_funcUnit_use_unit_func, opcode_funcUnit_use_stage_func): New.
(resource_table struct): New.
* config/xtensa-istack.h (MAX_INSN_ARGS): Increase from 6 to 10.
(TInsn struct): Add keep_wide, loc, fixup, record_fix, subtype,
literal_space, symbol, sub_symbol, offset, and literal_frag fields.
(tinsn_copy): Delete prototype.
(vliw_insn struct): New.
* config/xtensa-relax.c (insn_pattern_struct): Add options field.
(widen_spec_list): Add option conditions for density and boolean
instructions. Add expansions using CONST16 and conditions for using
CONST16 vs. L32R. Use new Xtensa LX RSR/WSR syntax. Add entries for
predicted branches.
(simplify_spec_list): Add option conditions for density instructions.
Add entry for NOP instruction.
(append_transition): Add cmp function pointer parameter and use it to
insert the new entry in order.
(operand_function_LOW16U, operand_function_HI16U): New.
(xg_has_userdef_op_fn, xg_apply_userdef_op_fn): Handle
OP_OPERAND_LOW16U and OP_OPERAND_HI16U.
(enter_opname, split_string): Use xstrdup instead of strdup.
(init_insn_pattern): Initialize new options field.
(clear_req_or_option_list, clear_req_option_list,
clone_req_or_option_list, clone_req_option_list, parse_option_cond):
New.
(parse_insn_pattern): Parse option conditions.
(transition_applies): New.
(build_transition): Use new xtensa-isa.h functions. Fix incorrectly
swapped last arguments in calls to append_constant_value_condition.
Call clone_req_option_list. Add warning about invalid opcode.
Handle LOW16U and HI16U function names.
(build_transition_table): Add cmp parameter and use it in calls to
append_transition. Use new xtensa-isa.h functions. Check
transition_applies before adding entries.
(xg_build_widen_table, xg_build_simplify_table): Add cmp parameter and
pass it through to build_transition_table.
* config/xtensa-relax.h (ReqOrOptionList, ReqOrOption, ReqOptionList,
ReqOption, transition_cmp_fn): New types.
(OpType enum): Add OP_OPERAND_LOW16U and OP_OPERAND_HI16U.
(transition_rule struct): Add options field.
* doc/as.texinfo (Overview): Update Xtensa options.
* doc/c-xtensa.texi (Xtensa Options): Delete --[no-]density,
--[no-]relax, and --[no-]generics options. Update descriptions of
--text-section-literals and --[no-]longcalls. Add
--[no-]absolute-literals and --[no-]transform.
(Xtensa Syntax): Add description of syntax for FLIX instructions.
Remove use of "generic" and "specific" terminology for opcodes.
(Xtensa Registers): Generalize the syntax description to include
user-defined register files.
(Xtensa Automatic Alignment): Update.
(Xtensa Branch Relaxation): Mention limitation of unconditional jumps.
(Xtensa Call Relaxation): Linker can now remove most of the overhead.
(Xtensa Directives): Remove confusing rules about precedence.
(Density Directive, Relax Directive): Delete.
(Schedule Directive): New.
(Generics Directive): Rename to ...
(Transform Directive): ... this node.
(Literal Directive): Update for absolute literals. Missing
literal_position directive is now an error.
(Literal Position Directive): Update for absolute literals.
(Freeregs Directive): Delete.
(Absolute Literals Directive): New.
(Frame Directive): Minor editing.
* Makefile.am (DEPTC_xtensa_elf, DEPOBJ_xtensa_elf, DEP_xtensa_elf):
Update dependencies.
* Makefile.in: Regenerate.
gas/testsuite ChangeLog
* gas/xtensa/all.exp: Adjust expected error message for j_too_far.
Change entry_align test to expect an error.
* gas/xtensa/entry_misalign2.s: Use no-transform instead of
no-generics directives.
include ChangeLog
* xtensa-config.h (XSHAL_USE_ABSOLUTE_LITERALS,
XCHAL_HAVE_PREDICTED_BRANCHES, XCHAL_INST_FETCH_WIDTH): New.
(XCHAL_EXTRA_SA_SIZE, XCHAL_EXTRA_SA_ALIGN): Delete.
* xtensa-isa-internal.h (ISA_INTERFACE_VERSION): Delete.
(config_sturct struct): Delete.
(XTENSA_OPERAND_IS_REGISTER, XTENSA_OPERAND_IS_PCRELATIVE,
XTENSA_OPERAND_IS_INVISIBLE, XTENSA_OPERAND_IS_UNKNOWN,
XTENSA_OPCODE_IS_BRANCH, XTENSA_OPCODE_IS_JUMP,
XTENSA_OPCODE_IS_LOOP, XTENSA_OPCODE_IS_CALL,
XTENSA_STATE_IS_EXPORTED, XTENSA_INTERFACE_HAS_SIDE_EFFECT): Define.
(xtensa_format_encode_fn, xtensa_get_slot_fn, xtensa_set_slot_fn): New.
(xtensa_insn_decode_fn): Rename to ...
(xtensa_opcode_decode_fn): ... this.
(xtensa_immed_decode_fn, xtensa_immed_encode_fn, xtensa_do_reloc_fn,
xtensa_undo_reloc_fn): Update.
(xtensa_encoding_template_fn): Delete.
(xtensa_opcode_encode_fn, xtensa_format_decode_fn,
xtensa_length_decode_fn): New.
(xtensa_format_internal, xtensa_slot_internal): New types.
(xtensa_operand_internal): Delete operand_kind, inout, isPCRelative,
get_field, and set_field fields. Add name, field_id, regfile,
num_regs, and flags fields.
(xtensa_arg_internal): New type.
(xtensa_iclass_internal): Change operands field to array of
xtensa_arg_internal. Add num_stateOperands, stateOperands,
num_interfaceOperands, and interfaceOperands fields.
(xtensa_opcode_internal): Delete length, template, and iclass fields.
Add iclass_id, flags, encode_fns, num_funcUnit_uses, and funcUnit_uses.
(opname_lookup_entry): Delete.
(xtensa_regfile_internal, xtensa_interface_internal,
xtensa_funcUnit_internal, xtensa_state_internal,
xtensa_sysreg_internal, xtensa_lookup_entry): New.
(xtensa_isa_internal): Replace opcode_table field with opcodes field.
Change type of opname_lookup_table. Delete num_modules,
module_opcode_base, module_decode_fn, config, and has_density fields.
Add num_formats, formats, format_decode_fn, length_decode_fn,
num_slots, slots, num_fields, num_operands, operands, num_iclasses,
iclasses, num_regfiles, regfiles, num_states, states,
state_lookup_table, num_sysregs, sysregs, sysreg_lookup_table,
max_sysreg_num, sysreg_table, num_interfaces, interfaces,
interface_lookup_table, num_funcUnits, funcUnits and
funcUnit_lookup_table fields.
(xtensa_isa_module, xtensa_isa_modules): Delete.
(xtensa_isa_name_compare): New prototype.
(xtisa_errno, xtisa_error_msg): New.
* xtensa-isa.h (XTENSA_ISA_VERSION): Define.
(xtensa_isa): Change type.
(xtensa_operand): Delete.
(xtensa_format, xtensa_regfile, xtensa_state, xtensa_sysreg,
xtensa_interface, xtensa_funcUnit, xtensa_isa_status,
xtensa_funcUnit_use): New types.
(libisa_module_specifier): Delete.
(xtensa_isa_errno, xtensa_isa_error_msg): New prototypes.
(xtensa_insnbuf_free, xtensa_insnbuf_to_chars,
xtensa_insnbuf_from_chars): Update prototypes.
(xtensa_load_isa, xtensa_extend_isa, xtensa_default_isa,
xtensa_insn_maxlength, xtensa_num_opcodes, xtensa_decode_insn,
xtensa_encode_insn, xtensa_insn_length,
xtensa_insn_length_from_first_byte, xtensa_num_operands,
xtensa_operand_kind, xtensa_encode_result,
xtensa_operand_isPCRelative): Delete.
(xtensa_isa_init, xtensa_operand_inout, xtensa_operand_get_field,
xtensa_operand_set_field, xtensa_operand_encode,
xtensa_operand_decode, xtensa_operand_do_reloc,
xtensa_operand_undo_reloc): Update prototypes.
(xtensa_isa_maxlength, xtensa_isa_length_from_chars,
xtensa_isa_num_pipe_stages, xtensa_isa_num_formats,
xtensa_isa_num_opcodes, xtensa_isa_num_regfiles, xtensa_isa_num_states,
xtensa_isa_num_sysregs, xtensa_isa_num_interfaces,
xtensa_isa_num_funcUnits, xtensa_format_name, xtensa_format_lookup,
xtensa_format_decode, xtensa_format_encode, xtensa_format_length,
xtensa_format_num_slots, xtensa_format_slot_nop_opcode,
xtensa_format_get_slot, xtensa_format_set_slot, xtensa_opcode_decode,
xtensa_opcode_encode, xtensa_opcode_is_branch, xtensa_opcode_is_jump,
xtensa_opcode_is_loop, xtensa_opcode_is_call,
xtensa_opcode_num_operands, xtensa_opcode_num_stateOperands,
xtensa_opcode_num_interfaceOperands, xtensa_opcode_num_funcUnit_uses,
xtensa_opcode_funcUnit_use, xtensa_operand_name,
xtensa_operand_is_visible, xtensa_operand_is_register,
xtensa_operand_regfile, xtensa_operand_num_regs,
xtensa_operand_is_known_reg, xtensa_operand_is_PCrelative,
xtensa_stateOperand_state, xtensa_stateOperand_inout,
xtensa_interfaceOperand_interface, xtensa_regfile_lookup,
xtensa_regfile_lookup_shortname, xtensa_regfile_name,
xtensa_regfile_shortname, xtensa_regfile_view_parent,
xtensa_regfile_num_bits, xtensa_regfile_num_entries,
xtensa_state_lookup, xtensa_state_name, xtensa_state_num_bits,
xtensa_state_is_exported, xtensa_sysreg_lookup,
xtensa_sysreg_lookup_name, xtensa_sysreg_name, xtensa_sysreg_number,
xtensa_sysreg_is_user, xtensa_interface_lookup, xtensa_interface_name,
xtensa_interface_num_bits, xtensa_interface_inout,
xtensa_interface_has_side_effect, xtensa_funcUnit_lookup,
xtensa_funcUnit_name, xtensa_funcUnit_num_copies): New prototypes.
* elf/xtensa.h (R_XTENSA_DIFF8, R_XTENSA_DIFF16, R_XTENSA_DIFF32,
R_XTENSA_SLOT*_OP, R_XTENSA_SLOT*_ALT): New relocations.
(XTENSA_PROP_SEC_NAME): Define.
(property_table_entry): Add flags field.
(XTENSA_PROP_*, GET_XTENSA_PROP_*, SET_XTENSA_PROP_*): Define.
ld ChangeLog
* ld.texinfo (Xtensa): Describe new linker relaxation to optimize
assembler-generated longcall sequences. Describe new --size-opt
option.
* emulparams/elf32xtensa.sh (OTHER_SECTIONS): Add .xt.prop section.
* emultempl/xtensaelf.em (remove_section,
replace_insn_sec_with_prop_sec, replace_instruction_table_sections,
elf_xtensa_after_open): New.
(OPTION_OPT_SIZEOPT, OPTION_LITERAL_MOVEMENT,
OPTION_NO_LITERAL_MOVEMENT): Define.
(elf32xtensa_size_opt, elf32xtensa_no_literal_movement): New globals.
(PARSE_AND_LIST_LONGOPTS): Add size-opt and [no-]literal-movement.
(PARSE_AND_LIST_OPTIONS): Add --size-opt.
(PARSE_AND_LIST_ARGS_CASES): Handle OPTION_OPT_SIZEOPT,
OPTION_LITERAL_MOVEMENT, and OPTION_NO_LITERAL_MOVEMENT.
(LDEMUL_AFTER_OPEN): Set to elf_xtensa_after_open.
* scripttempl/elfxtensa.sc: Update with changes from elf.sc.
* Makefile.am (eelf32xtensa.c): Update dependencies.
* Makefile.in: Regenerate.
ld/testsuite ChangeLog
* ld-xtensa/lcall1.s: Use .literal directive.
* ld-xtensa/lcall2.s: Align function entry.
* ld-xtensa/coalesce2.s: Likewise.
opcodes ChangeLog
* xtensa-dis.c (state_names): Delete.
(fetch_data): Use xtensa_isa_maxlength.
(print_xtensa_operand): Replace operand parameter with opcode/operand
pair. Remove print_sr_name parameter. Use new xtensa-isa.h functions.
(print_insn_xtensa): Use new xtensa-isa.h functions. Handle multislot
instruction bundles. Use xmalloc instead of malloc.
2004-07-20 Jim Blandy <jimb@redhat.com>
Use a fixed register numbering when communicating with the PowerPC
simulator.
* ppc-tdep.h (struct gdbarch_tdep): New member: 'sim_regno'.
* rs6000-tdep.c: #include "sim-regno.h" and "gdb/sim-ppc.h".
(set_sim_regno, init_sim_regno_table, rs6000_register_sim_regno):
New functions.
(rs6000_gdbarch_init): Register rs6000_register_sim_regno. Call
init_sim_regno_table.
* Makefile.in (gdb_sim_ppc_h): New variable.
(rs6000-tdep.o): Update dependencies.
include/gdb/ChangeLog:
2004-07-20 Jim Blandy <jimb@redhat.com>
* sim-ppc.h: New file.
sim/ppc/ChangeLog:
2004-07-20 Jim Blandy <jimb@redhat.com>
Use a fixed register numbering when communicating with the PowerPC
simulator.
* sim_calls.c: #include "registers.h" and "gdb/sim-ppc.h"; do not
include GDB's "defs.h".
(gdb_register_name_table): New variable.
(gdb_register_name_table_size): New enum constant.
(gdb_register_name): New function.
(sim_fetch_register, sim_store_register): Use gdb_register_name,
instead of calling gdbarch_register_name.
* Makefile.in (GDB_SIM_PPC_H): New variable.
(DEFS_H): Delete variable.
(sim_calls.o): Update dependencies.
2004-07-20 Jim Blandy <jimb@redhat.com>
Use a fixed register numbering when communicating with the PowerPC
simulator.
* ppc-tdep.h (struct gdbarch_tdep): New member: 'sim_regno'.
* rs6000-tdep.c: #include "sim-regno.h" and "gdb/sim-ppc.h".
(set_sim_regno, init_sim_regno_table, rs6000_register_sim_regno):
New functions.
(rs6000_gdbarch_init): Register rs6000_register_sim_regno. Call
init_sim_regno_table.
* Makefile.in (gdb_sim_ppc_h): New variable.
(rs6000-tdep.o): Update dependencies.
include/gdb/ChangeLog:
2004-07-20 Jim Blandy <jimb@redhat.com>
* sim-ppc.h: New file.
sim/ppc/ChangeLog:
2004-07-20 Jim Blandy <jimb@redhat.com>
Use a fixed register numbering when communicating with the PowerPC
simulator.
* sim_calls.c: #include "registers.h" and "gdb/sim-ppc.h"; do not
include GDB's "defs.h".
(gdb_register_name_table): New variable.
(gdb_register_name_table_size): New enum constant.
(gdb_register_name): New function.
(sim_fetch_register, sim_store_register): Use gdb_register_name,
instead of calling gdbarch_register_name.
* Makefile.in (GDB_SIM_PPC_H): New variable.
(DEFS_H): Delete variable.
(sim_calls.o): Update dependencies.
* i386.h (i386_optab): Remove fildd, fistpd and fisttpd.
opcodes/
* i386-dis.c (x_mode): Comment.
(two_source_ops): File scope.
(float_mem): Correct fisttpll and fistpll.
(float_mem_mode): New table.
(dofloat): Use it.
(OP_E): Correct intel mode PTR output.
(ptr_reg): Use open_char and close_char.
(PNI_Fixup): Handle possible suffix on sidt. Use op1out etc. for
operands. Set two_source_ops.
gas/testsuite/
* gas/i386/prescott.s: Remove fisttpd and fisttpq.
* gas/i386/prescott.d: Update.
2004-06-14 Chris Demetriou <cgd@broadcom.com>
* elf32-mips.c (elf_mips_gnu_pcrel32): Add (undoing 2004-04-24
removal) with updated comment.
(bfd_elf32_bfd_reloc_type_lookup): Add back case for
BFD_RELOC_32_PCREL.
(mips_elf32_rtype_to_howto): Add back case for R_MIPS_PC32.
* elfxx-mips.c (mips_elf_calculate_relocation): Likewise.
[ include/elf/ChangeLog ]
2004-06-14 Chris Demetriou <cgd@broadcom.com>
* mips.h (R_MIPS_PC32): Add back (undoing removal on 2004-04-24),
with an updated comment.
bfd:
* Makefile.am: Regenerate dependencies.
* Makefile.in: Regenerate.
* archures.c: Add bfd_mach_sh3_nommu .
* bfd-in2.h: Regenerate.
* cpu-sh.c: Add sh3-nommu architecture.
(bfd_to_arch_table): Create new table.
(sh_get_arch_from_bfd_mach): Create new function.
(sh_get_arch_up_from_bfd_mach): Create new function.
(sh_merge_bfd_arch): Create new function.
* elf32-sh.c (sh_ef_bfd_table): Add table.
(sh_elf_check_relocs): Replace switch statement with
use of sh_ef_bfd_table .
(sh_elf_get_flags_from_mach): Add new function.
(sh_find_elf_flags): Likewise.
(sh_elf_copy_private_data): Replace most of non-elf contents
with a call to sh_merge_bfd_arch() .
gas:
* Makefile.am: Regenerate dependecies.
* Makefile.in: Regenerate.
* config/tc-sh.c (valid_arch): Make unsigned.
(preset_target_arch): Likewise.
(md_begin): Use new architecture flags system.
(get_specific): Likewise.
(assemble_ppi): Likewise.
(md_assemble): Likewise. Also fix error check for bad opcodes.
(md_parse_option): Likewise. Also generate -isa values according
to the table in bfd/cpu-sh.c instead of just constants. Also
allow <arch>-up ISA variants.
(sh_elf_final_processing): Replace if-else chain with a call to
sh_find_elf_flags().
* testsuite/gas/sh/arch: New directory.
* testsuite/gas/sh/arch/arch.exp: New test script.
* testsuite/gas/sh/arch/arch_expected.txt: New file.
* testsuite/gas/sh/arch/sh.s: New file.
* testsuite/gas/sh/arch/sh2.s: New file.
* testsuite/gas/sh/arch/sh-dsp.s: New file.
* testsuite/gas/sh/arch/sh2e.s: New file.
* testsuite/gas/sh/arch/sh3-nommu.s: New file.
* testsuite/gas/sh/arch/sh3.s: New file.
* testsuite/gas/sh/arch/sh3-dsp.s: New file.
* testsuite/gas/sh/arch/sh3e.s: New file.
* testsuite/gas/sh/arch/sh4-nommu-nofpu.s: New file.
* testsuite/gas/sh/arch/sh4-nofpu.s: New file.
* testsuite/gas/sh/arch/sh4.s: New file.
* testsuite/gas/sh/arch/sh4a-nofpu.s: New file.
* testsuite/gas/sh/arch/sh4al-dsp.s: New file.
* testsuite/gas/sh/arch/sh4a.s: New file.
include/elf:
* sh.h (EF_SH_HAS_DSP): Remove.
(EF_SH_HAS_FP): Remove.
(EF_SH_MERGE_MACH): Remove.
(EF_SH4_NOFPU): Convert to decimal.
(EF_SH4A_NOFPU): Likewise.
(EF_SH4_NOMMU_NOFPU): Likewise.
(EF_SH3_NOMMU): Add new macro.
(EF_SH_BFD_TABLE): Likewise.
(sh_find_elf_flags): Add prototype.
(sh_elf_get_flags_from_mach): Likewise.
opcodes:
* sh-dis.c (target_arch): Make unsigned.
(print_insn_sh): Replace (most of) switch with a call to
sh_get_arch_from_bfd_mach(). Also use new architecture flags system.
* sh-opc.h: Redefine architecture flags values.
Add sh3-nommu architecture.
Reorganise <arch>_up macros so they make more visual sense.
(SH_MERGE_ARCH_SET): Define new macro.
(SH_VALID_BASE_ARCH_SET): Likewise.
(SH_VALID_MMU_ARCH_SET): Likewise.
(SH_VALID_CO_ARCH_SET): Likewise.
(SH_VALID_ARCH_SET): Likewise.
(SH_MERGE_ARCH_SET_VALID): Likewise.
(SH_ARCH_SET_HAS_FPU): Likewise.
(SH_ARCH_SET_HAS_DSP): Likewise.
(SH_ARCH_UNKNOWN_ARCH): Likewise.
(sh_get_arch_from_bfd_mach): Add prototype.
(sh_get_arch_up_from_bfd_mach): Likewise.
(sh_get_bfd_mach_from_arch_set): Likewise.
(sh_merge_bfd_arc): Likewise.
ld:
* testsuite/ld-sh/arch/arch.exp: New test script.
* testsuite/ld-sh/arch/arch_expected.txt: New file.
* testsuite/ld-sh/arch/sh.s: New file.
* testsuite/ld-sh/arch/sh2.s: New file.
* testsuite/ld-sh/arch/sh-dsp.s: New file.
* testsuite/ld-sh/arch/sh2e.s: New file.
* testsuite/ld-sh/arch/sh3-nommu.s: New file.
* testsuite/ld-sh/arch/sh3.s: New file.
* testsuite/ld-sh/arch/sh3-dsp.s: New file.
* testsuite/ld-sh/arch/sh3e.s: New file.
* testsuite/ld-sh/arch/sh4-nommu-nofpu.s: New file.
* testsuite/ld-sh/arch/sh4-nofpu.s: New file.
* testsuite/ld-sh/arch/sh4.s: New file.
* testsuite/ld-sh/arch/sh4a-nofpu.s: New file.
* testsuite/ld-sh/arch/sh4al-dsp.s: New file.
* testsuite/ld-sh/arch/sh4a.s: New file.
2004-04-23 Chris Demetriou <cgd@broadcom.com>
* coff-mips.c (mips_relhi_reloc, mips_rello_reloc)
(mips_switch_reloc, mips_read_relocs, mips_relax_section)
(mips_relax_pcrel16, PCREL16_EXPANSION_ADJUSTMENT): Remove.
(mips_relocate_hi): Remove now-unused 'adjust' and 'pcrel' arguments,
and update comments to reflect current usage.
(mips_howto_table): Remove entries for MIPS_R_RELHI, MIPS_R_RELLO,
and MIPS_R_SWITCH, as well as several empty entries. Update comment
for MIPS_R_PCREL16.
(mips_ecoff_swap_reloc_in, mips_ecoff_swap_reloc_out)
(mips_adjust_reloc_out, mips_bfd_reloc_type_lookup): Remove support
for MIPS_R_SWITCH, MIPS_R_RELLO, and MIPS_R_RELHI relocations.
(mips_adjust_reloc_in): Likewise, adjust maximum accepted relocation
type number to be MIPS_R_PCREL16.
(mips_relocate_section): Remove support for link-time relaxation
of branches used by embedded-PIC. Remove support for MIPS_R_SWITCH,
MIPS_R_RELLO, and MIPS_R_RELHI relocations.
(_bfd_ecoff_bfd_relax_section): Redefine to bfd_generic_relax_section.
* ecoff.c (ecoff_indirect_link_order): Remove support for link-time
relaxation of branches used by embedded-PIC.
* ecofflink.c (bfd_ecoff_debug_accumulate): Likewise.
* libecoff.h (struct ecoff_section_tdata): Remove embedded-PIC
related members, update comment.
* pe-mips.c: Remove disabled (commented-out and #if 0'd)
code related to embedded-PIC.
* elfxx-mips.c (_bfd_mips_elf_read_ecoff_info): Remove
initialization of now-removed 'adjust' member of
'struct ecoff_debug_info'.
[ include/coff/ChangeLog ]
2004-04-23 Chris Demetriou <cgd@broadcom.com>
* mips.h (MIPS_R_RELHI, MIPS_R_RELLO, MIPS_R_SWITCH): Remove
(MIPS_R_PCREL16): Update comment.
* ecoff.h (struct ecoff_value_adjust): Remove structure.
(struct ecoff_debug_info): Remove 'adjust' member.
(INVLPG_Fixup): New function.
(PNI_Fixup): Remove ATTRIBUTE_UNUSED from sizeflag.
* opcode/i386.h (i386_optab): Remove CpuNo64 from sysenter and
sysexit.
opcodes:
* sh-dis.c (print_insn_sh): Don't disassemble fp instructions in
nofpu mode. Add BFD type bfd_mach_sh4_nommu_nofpu.
* sh-opc.h: Add sh4_nommu_nofpu architecture and adjust instructions
accordingly.
bfd:
* archures.c: Add bfd_mach_sh4_nommu_nofpu.
* cpu-sh.c: Ditto.
* elf32-sh.c: Ditto.
* bfd-in2.h: Regenerate.
include/elf:
* sh.h: Add EF_SH4_NOMMU_NOFPU.
gas:
* config/tc-sh.c (md_parse_option): Add -isa=sh4-nofpu and
-isa=sh4-nommu-nofpu options. Adjust help messages accordingly.
(sh_elf_final_processing): Output BFD type sh4_nofpu if that is
the most general type or the user specifically requested it.
(md_assemble): Add a new error message for when an instruction
is understood, but is not allowed due to an -isa option.
2003-12-04 H.J. Lu <hongjiu.lu@intel.com>
* elfxx-ia64.c (elfNN_ia64_relax_section): Use the
need_relax_finalize field in link_info instead of
relax_finalizing to check if the relax finalize pass is being
done.
include/
2003-12-04 H.J. Lu <hongjiu.lu@intel.com>
* bfdlink.h (bfd_link_info): Change relax_finalizing to
need_relax_finalize.
ld/
2003-12-04 H.J. Lu <hongjiu.lu@intel.com>
* emultempl/ia64elf.em (gld${EMULATION_NAME}_after_parse): Set
link_info.need_relax_finalize to TRUE.
* ldlang.c (lang_process): Use link_info.need_relax_finalize
instead of link_info.relax_finalizing.
* ldmain.c (main): Likewise.
for loading addresses using CALL relocations.
Don't emit CALL relocations when a base register is used.
* gas/mips/lca-svr4pic.d: New test for the "lca" macro.
* gas/mips/lca-xgot.d: Likewise.
* gas/mips/lca.s: Source for the new tests.
* gas/mips/mips.exp: Run the new tests.
* opcode/mips.h: Define new enum members, M_LCA_AB and M_DLCA_AB.
* mips-opc.c (mips_builtin_opcodes): Handle new macros: "lca" and
"dlca".
2003-10-24 H.J. Lu <hongjiu.lu@intel.com>
* elflink.h (NAME(bfd_elf,size_dynamic_sections)): Look up
hash table for real symbols.
include/
2003-10-24 H.J. Lu <hongjiu.lu@intel.com>
* bfdlink.h (bfd_elf_version_expr): Add "symbol" and remove
"wildcard".
ld/
2003-10-24 H.J. Lu <hongjiu.lu@intel.com>
* ldlang.c (lang_vers_match): Check "symbol" instead of
"wildcard" and "pattern". Fix a typo.
(lang_finalize_version_expr_head): Likewise.
(lang_register_vers_node): Likewise.
(realsymbol): New function.
(lang_new_vers_pattern): Set "symbol" and remove "wildcard".
* ldlex.l (V_IDENTIFIER): Allow '\\'.
* elflink.c (_bfd_elf_export_symbol): Adjust for globals and locals
field changes.
(_bfd_elf_link_assign_sym_version): Likewise.
* elflink.h (size_dynamic_sections): Likewise.
include/
* bfdlink.h (struct bfd_elf_version_expr): Remove match field.
Add wildcard and mask fields.
(BFD_ELF_VERSION_C_TYPE): Define.
(BFD_ELF_VERSION_CXX_TYPE): Likewise.
(BFD_ELF_VERSION_JAVA_TYPE): Likewise.
(struct bfd_elf_version_expr_head): New.
(struct bfd_elf_version_tree): Add match field.
Change type of globals and locals fields
to struct bfd_elf_version_expr_head.
ld/
* ldlang.c: Include hashtab.h.
(lang_vers_match_lang_c, lang_vers_match_lang_cplusplus,
lang_vers_match_lang_java): Remove.
(lang_vers_match): New function.
(lang_new_vers_pattern): Initialize wildcard and mask
fields, don't initialize match.
(lang_new_vers_node): Use xcalloc. Adjust for globals and
locals field type changes. Set match field.
(version_expr_head_hash, version_expr_head_eq): New functions.
(lang_finalize_version_expr_head): New function.
(lang_register_vers_node): Call lang_finalize_version_expr_head.
Search in hash table if not wildcard when looking for duplicates.
* emultempl/ppc64elf.em (new_vers_pattern): Don't bother with
duplicate checking. Initialize all fields of dot_entry from entry
with the exception of pattern and next.
(_bfd_mmix_before_linker_allocation): Rename from
_bfd_mmix_prepare_linker_allocated_gregs.
(_bfd_mmix_after_linker_allocation): Rename from
_bfd_mmix_finalize_linker_allocated_gregs.
* callback.h (struct host_callback_struct): New members ftruncate
and truncate.
gdb:
sim/common:
* callback.c (os_ftruncate, os_truncate): New functions.
(default_callback): Initialize ftruncate and truncate members.
sim/sh:
* syscall.h (SYS_truncate, SYS_ftruncate): Define.
* interp.c (trap): Add support for SYS_ftruncate and SYS_truncate.
2003-10-14 Bob Wilson <bob.wilson@acm.org>
* elf32-xtensa.c (get_is_linkonce_section): Delete.
(xtensa_is_property_section, xtensa_is_littable_section): Use
XTENSA_INSN_SEC_NAME and XTENSA_LIT_SEC_NAME macros. Do not recognize
linkonce sections containing ".xt.insn" and ".xt.lit" substrings.
(xtensa_get_property_section_name): Check section name instead of
calling get_is_linkonce_section. Remove unused bfd parameter. Use
XTENSA_INSN_SEC_NAME and XTENSA_LIT_SEC_NAME macros. Never generate
linkonce section names by appending ".xt.insn" or ".xt.lit".
(xtensa_read_table_entries): Remove bfd argument in call to
xtensa_get_property_section_name. Free section name when done.
(elf_xtensa_combine_prop_entries): Free leaking table.
gas ChangeLog:
2003-10-14 Bob Wilson <bob.wilson@acm.org>
* config/tc-xtensa.c (xtensa_create_property_segments): Remove bfd
argument in call to xtensa_get_property_section_name. Formatting.
include ChangeLog:
2003-10-14 Bob Wilson <bob.wilson@acm.org>
* elf/xtensa.h: Formatting. Fix comments about property section
names for linkonce sections.
[bfd/ChangeLog]
* coff-i860.c (coff_i860_reloc_nyi): New function.
(howto_table): Add entries for relocations PAIR, HIGHADJ, HIGH,
LOWn, SPLITn, and BRADDR.
(RTYPE2HOWTO): Check that the r_type is within the howto_table
before trying to access the entry.
(coff_i860_rtype_to_howto): Likewise.
(coff_i860_reloc_type_lookup): New function.
(i860_reloc_processing): New function.
(coff_bfd_reloc_type_lookup): Define macro.
(RELOC_PROCESSING): Define macro.
Minor formatting adjustments.
[include/coff/ChangeLog]
* coff/i860.h (COFF860_R_PAIR, COFF860_R_LOW0, COFF860_R_LOW1,
COFF860_R_LOW2, COFF860_R_LOW3, COFF860_R_LOW4, COFF860_R_SPLIT0,
COFF860_R_SPLIT1, COFF860_R_SPLIT2, COFF860_R_HIGHADJ,
COFF860_R_BRADDR): Define new relocation constants and document.
Minor formatting adjustments.
2003-08-16 Jason Eckhardt <jle@rice.edu>
* i860.h (fmov.ds): Expand as famov.ds.
(fmov.sd): Expand as famov.sd.
(pfmov.ds): Expand as pfamov.ds.
gas/testsuite/ChangeLog:
2003-08-16 Jason Eckhardt <jle@rice.edu>
* gas/i860/pseudo-ops01.{s,d}: New files.
* gas/i860/i860.exp: Execute the new test above.
* gas/i860/README.i860: Mention that pseudo-ops need more testing
and remove the align fill defect from the list.
* elf32-ppc.c (R_PPC_RELAX32): New relocation.
(ppc_elf_install_value): New function.
(ppc_elf_sort_rela): Remove.
(ppc_elf_relax_section): Rewrite. Remove old relaxation
and replace with out of range branch stubs.
(ppc_elf_relocate_section): Handle R_PPC_RELAX32.
2003-07-28 Eric Christopher <echristo@redhat.com>
* ppc.h (R_PPC_RELAX32): New. Fake relocation.
* mips.h (CPU_RM7000): New macro.
(OPCODE_IS_MEMBER): Match CPU_RM7000 against 4650 insns.
bfd/
* archures.c (bfd_mach_mips7000): New.
* bfd-in2.h: Regenerated.
* cpu-mips.c (arch_info_struct): Add an entry for mips:7000.
* elfxx-mips.c (mips_set_isa_flags): Handle bfd_mach_mips7000.
(mips_mach_extensions): Add an entry for it.
opcodes/
* mips-dis.c (mips_arch_choices): Add rm7000 and rm9000 entries.
gas/
* config/tc-mips.c (hilo_interlocks): True for CPU_RM7000.
(mips_cpu_info_table): Add rm7000 and rm9000 entries.
gas/testsuite/
* gas/mips/rm7000.[sd]: New test.
* gas/mips/mips.exp: Run it.
2003-06-23 H.J. Lu <hongjiu.lu@intel.com>
* gas/config/tc-i386.c (md_assemble): Support Intel Precott New
Instructions.
* gas/config/tc-i386.h (CpuPNI): New.
(CpuUnknownFlags): Add CpuPNI.
gas/testsuite/
2003-06-23 H.J. Lu <hongjiu.lu@intel.com>
* gas/i386/i386.exp: Add prescott.
* gas/i386/prescott.d: New file.
* gas/i386/prescott.s: Likewise.
include/opcode/
2003-06-23 H.J. Lu <hongjiu.lu@intel.com>
* i386.h (i386_optab): Support Intel Precott New Instructions.
opcodes/
2003-06-23 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (PNI_Fixup): New. Fix up "mwait" and "monitor" in
Intel Precott New Instructions.
(PREGRP27): New. Added for "addsubpd" and "addsubps".
(PREGRP28): New. Added for "haddpd" and "haddps".
(PREGRP29): New. Added for "hsubpd" and "hsubps".
(PREGRP30): New. Added for "movsldup" and "movddup".
(PREGRP31): New. Added for "movshdup" and "movhpd".
(PREGRP32): New. Added for "lddqu".
(dis386_twobyte): Use PREGRP30 to replace the "movlpX" entry.
Use PREGRP31 to replace the "movhpX" entry. Use PREGRP28 for
entry 0x7c. Use PREGRP29 for entry 0x7d. Use PREGRP27 for
entry 0xd0. Use PREGRP32 for entry 0xf0.
(twobyte_has_modrm): Updated.
(twobyte_uses_SSE_prefix): Likewise.
(grps): Use PNI_Fixup in the "sidtQ" entry.
(prefix_user_table): Add PREGRP27, PREGRP28, PREGRP29, PREGRP30,
PREGRP31 and PREGRP32.
(float_mem): Use "fisttp{l||l|}" in entry 1 in opcode 0xdb.
Use "fisttpll" in entry 1 in opcode 0xdd.
Use "fisttp" in entry 1 in opcode 0xdf.
* h8300.h (IMM4_NS, IMM8_NS): New.
(h8_opcodes): Replace IMM4 with IMM4_NS in mov.b and mov.w entries.
Likewise IMM8 for mov.w and mov.l. Likewise IMM16U for mov.l.
gas/testsuite
* gas/h8300/h8sx_mov_imm.[sd]: New test.
* gas/h8300/h8300.exp: Run it.
* h8sx.h (enum h8_model): Add AV_H8S to distinguish from H8H.
(ldc): Split ccr ops from exr ops (which are only available
on H8S or H8SX).
(stc): Ditto.
(andc, orc, xorc): Ditto.
(ldmac, stmac, clrmac, mac): Change access to AV_H8S.
opcode/i860.h (fzchks): Both S and R bits must be set.
(pfzchks): Likewise.
(faddp): Likewise.
(pfaddp): Likewise.
(fix.ss): Remove (invalid instruction).
(pfix.ss): Likewise.
(ftrunc.ss): Likewise.
(pftrunc.ss): Likewise.
2003-05-14 Jim Blandy <jimb@redhat.com>
* hex.c (_hex_value): Make this unsigned.
(hex_value): Update documentation for new return type. hex_value
now expands to an unsigned int expression, to avoid unexpected
sign extension when we store it in a bfd_vma, which is larger than
int on some platforms.
* functions.texi: Regenerated.
include/ChangeLog:
2003-05-14 Jim Blandy <jimb@redhat.com>
* libiberty.h (hex_value): Make the value an unsigned int, to
avoid unexpected sign-extension when cast to unsigned types larger
than int --- like bfd_vma, on some platforms.
(_hex_value): Update declaration.
gcc:
* config/sh/sh.h (EXTRA_SPECS): Add subtarget_asm_relax_spec and
subtarget_asm_isa_spec.
(SUBTARGET_ASM_RELAX_SPEC, SUBTARGET_ASM_ISA_SPEC): Define.
(ASM_SPEC): Define as SH_ASM_SPEC.
(SH_ASM_SPEC): New; take the role of ASM_SPEC, but safe from svr4.h.
Use subtarget_asm_relax_spec and subtarget_asm_isa_spec.
* config/sh/elf.h (ASM_SPEC): Use SH_ASM_SPEC.
(SUBTARGET_ASM_ISA_SPEC): Undef / define.
gcc/testsuite:
gcc.dg/sh-relax.c: New test.
include/elf:
* sh.h (EF_SH_MERGE_MACH): Make sure SH2E & SH3/SH3E merge to SH3E,
and SH2E & SH4 merge to SH4, not SH2E.
gas:
* config/tc-sh.c (sh_dsp): Replace with preset_target_arch.
(md_begin): Use preset_target_arch.
(md_longopts): Make isa option unconditional.
(md_parse_option): Make OPTION_DSP and OPTION_ISA sh4 / any
set preset_target_arch.
(md_apply_fix3): If BFD_ASSEMBLER, adjust SWITCH_TABLE fixups
by -S_GET_VALUE (fixP->fx_subsy).
(tc_gen_reloc): For SWITCH_TABLE fixups, the symbol is fixp->fx_subsy,
and the addend is 0.
Adjust addend of R_SH_IND12W relocations by fixp->fx_offset - 4.
* config/tc-sh.h (TC_FORCE_RELOCATION_SUB_LOCAL): Define.
bfd:
elf32-sh.c (sh_elf_howto_tab): Make R_SH_IND12W into an ordinary
relocation (no special function), and make it non-partial_inplace.
(sh_elf_relax_section): When creating a bsr, use a consistent value
no matter if the symbol is extern or not; set addend to -4.
Don't swap load / non-load instructions for SH4.
(sh_elf_relax_delete_bytes): In R_SH_IND12W case, check the offset
rather than if the symbol is external to determine if adjusting the
offset makes sense. Adjust the addend too if appropriate.
(sh_elf_relocate_section): In R_SH_IND12W, don't fiddle with the
relocation.
* mips.h: Fix missing space in comment.
(INSN_ISA1, INSN_ISA2, INSN_ISA3, INSN_ISA4, INSN_ISA5)
(INSN_ISA32, INSN_ISA32R2, INSN_ISA64): Shift values right
by four bits.
2003-01-02 Chris Demetriou <cgd@broadcom.com>
* config/tc-mips.c: Update copyright years to include 2003.
(mips_ip): Fix indentation of "+A", "+B", and "+C" handling.
Additionally, clean up their code slightly and clean up their
comments some more.
* doc/c-mips.texi: Add MIPS32r2 to ".set mipsN" documentation.
[ gas/testsuite/ChangeLog ]
2003-01-02 Chris Demetriou <cgd@broadcom.com>
* gas/mips/elf_arch_mips32r2.d: Fix file description comment.
[ include/opcode/ChangeLog ]
2003-01-02 Chris Demetriou <cgd@broadcom.com>
* mips.h: Update copyright years to include 2002 (which had
been missed previously) and 2003. Make comments about "+A",
"+B", and "+C" operand types more descriptive.
2002-12-31 Chris Demetriou <cgd@broadcom.com>
* config/tc-mips.c (validate_mips_insn, mips_ip): Recognize
the "+D" operand, which will be used only by the disassembler.
[ gas/testsuite/ChangeLog ]
2002-12-31 Chris Demetriou <cgd@broadcom.com>
* gas/mips/cp0sel-names-mips32.d: New test.
* gas/mips/cp0sel-names-mips32r2.d: New test.
* gas/mips/cp0sel-names-mips64.d: New test.
* gas/mips/cp0sel-names-numeric.d: New test.
* gas/mips/cp0sel-names-sb1.d: New test.
* gas/mips/cp0sel-names.s: New test source file.
* gas/mips/mips.exp: Run new tests.
[ include/opcode/ChangeLog ]
2002-12-31 Chris Demetriou <cgd@broadcom.com>
* mips.h: Note that the "+D" operand type name is now used.
[ opcodes/ChangeLog ]
2002-12-31 Chris Demetriou <cgd@broadcom.com>
* mips-dis.c (mips_cp0sel_name): New structure.
(mips_cp0sel_names_mips3264, mips_cp0sel_names_mips3264r2)
(mips_cp0sel_names_sb1): New arrays.
(mips_arch_choice): New structure members "cp0sel_names" and
"cp0sel_names_len".
(mips_arch_choices): Add references to new cp0sel_names arrays
as appropriate, and make all existing entries reference
appropriate mips_XXX_names_numeric arrays rather than simply
using NULL.
(mips_cp0sel_names, mips_cp0sel_names_len): New variables.
(lookup_mips_cp0sel_name): New function.
(set_default_mips_dis_options): Set mips_cp0sel_names and
mips_cp0sel_names_len as appropriate. Remove now-unnecessary
checks for NULL register name arrays.
(parse_mips_dis_option): Likewise.
(print_insn_arg): Handle "+D" operand type.
* mips-opc.c (mips_builtin_opcodes): Add new "+D" variants
of mfc0, mtc0, dmfc0, and dmtc0 to print CP0+sel register
names symbolically.
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* aoutx.h (NAME(aout,machine_type)): Add bfd_mach_mipsisa32r2 case.
* archures.c (bfd_mach_mipsisa32r2): New define.
* bfd-in2.h: Regenerate.
* cpu-mips.c (I_mipsisa32r2): New enum value.
(arch_info_struct): Add entry for I_mipsisa32r2.
* elfxx-mips.c (elf_mips_isa, _bfd_elf_mips_mach)
(_bfd_mips_elf_print_private_bfd_data): Handle E_MIPS_ARCH_32R2.
(_bfd_mips_elf_final_write_processing): Add
bfd_mach_mipsisa32r2 case.
(_bfd_mips_elf_merge_private_bfd_data): Handle merging of
binaries marked as using MIPS32 Release 2.
[ binutils/ChangeLog ]
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* doc/binutils.texi (objdump): Note MIPS HWR (Hardware Register)
changes in MIPS -M options.
[ gas/ChangeLog ]
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* configure.in: Recognize mipsisa32r2, mipsisa32r2el, and
CPU variants.
* configure: Regenerate.
* config/tc-mips.c (ISA_HAS_DROR, ISA_HAS_ROR): New defines.
(macro_build): Handle "K" operand.
(macro2): Use ISA_HAS_DROR and ISA_HAS_ROR in the places where
CPU_HAS_DROR and CPU_HAS_ROR are currently used.
(mips_ip): New variable "lastpos", and implement "+A", "+B",
and "+C" operands for MIPS32 Release 2 ins/ext instructions.
Implement "K" operand for MIPS32 Release 2 rdhwr instruction.
(validate_mips_insn): Implement "+" as a way to extend the
allowed operands, and implement "K", "+A", "+B", and "+C"
operands.
(OPTION_MIPS32R2): New define.
(md_longopts): Add entry for OPTION_MIPS32R2.
(OPTION_ELF_BASE): Adjust to accomodate OPTIONS_MIPS32R2.
(md_parse_option): Handle OPTION_MIPS32R2.
(s_mipsset): Reimplement handling of ".set mipsN" options
and add support for ".set mips32r2".
(mips_cpu_info_table): Add entry for "mips32r2" (MIPS32 Release 2).
(md_show_usage): Document "-mips32r2" option.
* doc/as.texinfo: Document "-mips32r2" option.
* doc/c-mips.texi: Likewise.
[ gas/testsuite/ChangeLog ]
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* gas/mips/cp0-names-mips32r2.d: New test.
* gas/mips/hwr-names-mips32r2.d: New test.
* gas/mips/hwr-names-numeric.d: New test.
* gas/mips/hwr-names.s: New test source file.
* gas/mips/mips32r2.d: New test.
* gas/mips/mips32r2.s: New test source file.
* gas/mips/mips32r2-ill.l: New test.
* gas/mips/mips32r2-ill.s: New test source file.
* gas/mips/mips.exp: Add mips32r2 architecture data array
entry. Run new tests mentioned above.
[ include/elf/ChangeLog ]
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* mips.h (E_MIPS_ARCH_32R2): New define.
[ include/opcode/ChangeLog ]
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* mips.h: Document "+" as the start of two-character operand
type names, and add new "K", "+A", "+B", and "+C" operand types.
(OP_MASK_INSMSB, OP_SH_INSMSB, OP_MASK_EXTMSB)
(OP_SH_EXTMSB, INSN_ISA32R2, ISA_MIPS32R2, CPU_MIPS32R2): New
defines.
[ opcodes/ChangeLog ]
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* mips-dis.c (mips_cp0_names_mips3264r2, mips_hwr_names_numeric)
(mips_hwr_names_mips3264r2): New arrays.
(mips_arch_choice): New "hwr_names" member.
(mips_arch_choices): Adjust for structure change, and add a new
entry for "mips32r2" ISA.
(mips_hwr_names): New variable.
(set_default_mips_dis_options): Set mips_hwr_names.
(parse_mips_dis_option): New "hwr-names" option which sets
mips_hwr_names, and adjust "reg-names=ARCH" to set mips_hwr_names.
(print_insn_arg): Change return type to "int"
and use that to indicate number of characters consumed.
Add support for "+" operand extension character, "+A", "+B",
"+C", and "K" operands.
(print_insn_mips): Adjust for changes to print_insn_arg.
(print_mips_disassembler_options): Adjust for "hwr-names"
addition and "reg-names" change.
* mips-opc (I33): New define (shorthand for INSN_ISA32R2).
(mips_builtin_opcodes): Note that "nop" and "ssnop" are special
forms of "sll". Add new MIPS32 Release 2 instructions: ehb,
di, ei, ext, ins, jr.hb, jalr.hb, mfhc1, mfhc2, mthc1, mthc2,
rdhwr, rdpgpr, seb, seh, synci, wrpgpr, wsbh.
Note that hardware rotate instructions (ror, rorv) can be
used on MIPS32 Release 2, and add the official mnemonics
for them (rotr, rotrv) and the similar "rotl" mnemonic for
left-rotate.
* h8300.h (h8_opcode): Remove 'noperands', 'idx', and 'size'
fields.
(h8_opcodes). Modify initializer and initializer macros to no
longer initialize the removed fields.
* h8300.h (h8_opcode): Remove 'length' field.
(h8_opcodes): Mark as 'const' (both the declaration and
definition). Modify initializer and initializer macros to no
longer initialize the length field.
2002-11-11 Klee Dienes <kdienes@apple.com>
* h8300-dis.c: Include libiberty.h (for xmalloc).
(struct h8_instruction): New type, used to wrap h8_opcodes with a
length field (computed at run-time).
(h8_instructions): New variable.
(bfd_h8_disassemble_init): Allocate the storage for
h8_instructions. Fill h8_instructions with pointers to the
appropriate opcode and the correct value for the length field.
(bfd_h8_disassemble): Iterate through h8_instructions instead of
h8_opcodes.
* arc.h (arc_ext_opcodes): Declare as extern.
(arc_ext_operands): Declare as extern.
* i860.h (i860_opcodes): Declare as const.
2002-11-18 Klee Dienes <kdienes@apple.com>
* arc-opc.c (arc_ext_opcodes): Define.
(arc_ext_operands): Define.
* i386-dis.c (Suffix3DNow): Declare as const.
* arm-opc.h (arm_opcodes): Declare as const.
(thumb_opcodes): Declare as const.
* h8500-opc.h (h8500_table): Declare as const.
(h8500_table): Use a NULL for the opcode in the terminator, so
that code testing (opcode->name) behaves correctly.
* mcore-opc.h (mcore_table): Declare as const.
* sh-opc.h (sh_table): Declare as const.
* w65-opc.h (optable): Declare as const.
* z8k-opc.h (z8k_table): Declare as const.
parameters. Added support for new opcode-list format. General
error message fixups.
(c4x_inst_add): Reject insn not for our CPU
(md_begin): Added matrix for setting the proper opcode-level &
device-flags according to cpu type and revision. Rewrite the
opcode hasher.
(c4x_operand_parse): Fix opcode bug
(c4x_operands_match): New function argument. Added dry-run
mechanism, that is optional error generation. Added constraint 'i'
and 'j'.
(c4x_insn_check): Added new function for post-verification of the
generated insn.
(md_assemble): Check all opcodes before croaking because of an
argument mismatch. Need this to be able to fully support
ortogonally arguments.
(md_parse_options): Revised commandprompt swicthes and added new
ones.
(md_show_usage): Complete rewrite of printout.
* gas/testsuite/gas/tic4x/addressing.s: Fix bug in one insn
* gas/testsuite/gas/tic4x/addressing_c3x.d: Update thereafter
* gas/testsuite/gas/tic4x/addressing_c4x.d: Update thereafter
* gas/testsuite/gas/tic4x/allopcodes.S: Add support for new
opclass.h changes
* gas/testsuite/gas/tic4x/opclasses.h: Added testsuites for
the new enhanced opcodes.
* gas/testsuite/gas/tic4x/opcodes.s: Regenerate
* gas/testsuite/gas/tic4x/opcodes_c3x.d: Update from above
* gas/testsuite/gas/tic4x/opcodes_c4x.d: Update from above
* gas/testsuite/gas/tic4x/opcodes_new.d: Added new testsuite for
the enhanced and special insns.
* gas/testsuite/gas/tic4x/tic4x.exp: Added the opcodes_new testsuite
* include/opcode/tic4x.h: File reordering. Added enhanced opcodes.
* opcodes/tic4x-dis.c: Added support for enhanced and special
insn.
(c4x_print_op): Added insn class 'i' and 'j'
(c4x_hash_opcode_special): Add to support special insn
(c4x_hash_opcode): Update to support the new opcode-list
format. Add support for the new special insns.
(c4x_disassemble): New opcode-list support.
(c4x_operands_match): Added check for 8-bits LDF insn. Give
warning when using constant direct bigger than 2^16. Add the new
arguments.
* include/opcode/tic4x.h: Major rewrite of entire file. Define
instruction classes, and put each instruction into a class.
* opcodes/tic4x-dis.c: (c4x_print_op): Add support for the new
argument format. Fix bug in 'N' register printer.
* reloc.c (BFD_RELOC_386_TLS_TPOFF, BFD_RELOC_386_TLS_IE,
BFD_RELOC_386_TLS_GOTIE): Add.
* bfd-in2.h, libbfd.h: Rebuilt.
* elf32-i386.c (elf_howto_table): Add R_386_TLS_TPOFF, R_386_TLS_IE
and R_386_TLS_GOTIE.
(elf_i386_reloc_type_lookup): Handle it.
(struct elf_i386_link_hash_entry): Change tls_type type to unsigned
char instead of enum, change GOT_* into defines.
(GOT_TLS_IE_POS, GOT_TLS_IE_NEG, GOT_TLS_IE_BOTH): Define.
(elf_i386_tls_transition): Handle R_386_TLS_IE and R_386_TLS_GOTIE.
(elf_i386_check_relocs): Likewise. Avoid crash if local symbol is
accessed both as normal and TLS symbol. Move R_386_TLS_LDM and
R_386_PLT32 cases so that R_386_TLS_IE can fall through.
Handle R_386_TLS_LE_32 and R_386_TLS_LE in shared libs.
(elf_i386_gc_sweep_hook): Handle R_386_TLS_IE and R_386_TLS_GOTIE.
Handle R_386_TLS_LE_32 and R_386_TLS_LE in shared libs.
(allocate_dynrelocs): Allocate 2 .got and 2 .rel.got entries if
tls_type is GOT_TLS_IE_BOTH.
(elf_i386_size_dynamic_sections): Likewise.
(elf_i386_relocate_section): Handle R_386_TLS_IE and R_386_TLS_GOTIE.
Handle R_386_TLS_LE_32 and R_386_TLS_LE in shared libs.
(elf_i386_finish_dynamic_symbol): Use tls_type & GOT_TLS_IE to catch
all 4 GOT_TLS_* TLS types.
gas/
* config/tc-i386.c (tc_i386_fix_adjustable): Handle
BFD_RELOC_386_TLS_IE and BFD_RELOC_386_TLS_GOTIE.
(BFD_RELOC_386_TLS_IE, BFD_RELOC_386_TLS_GOTIE): Define to 0
if not defined.
(lex_got): Handle @GOTNTPOFF and @INDNTPOFF.
(md_apply_fix3, tc_gen_reloc): Handle BFD_RELOC_386_TLS_IE and
BFD_RELOC_386_TLS_GOTIE.
gas/testsuite/
* gas/i386/tlspic.s: Add tests.
* gas/i386/tlspic.d: Regenerated.
* gas/i386/tlsnopic.s: Add tests.
* gas/i386/tlsnopic.d: Regenerated.
include/
* elf/i386.h (R_386_TLS_TPOFF, R_386_TLS_IE, R_386_TLS_GOTIE):
Define.
ld/testsuite/
* ld-i386/i386.exp: New.
* ld-i386/tlsbin.dd: New test.
* ld-i386/tlsbinpic.s: New test.
* ld-i386/tlsbin.rd: New test.
* ld-i386/tlsbin.s: New test.
* ld-i386/tlsbin.sd: New test.
* ld-i386/tlsbin.td: New test.
* ld-i386/tlslib.s: New test.
* ld-i386/tlsnopic1.s: New test.
* ld-i386/tlsnopic2.s: New test.
* ld-i386/tlsnopic.dd: New test.
* ld-i386/tlsnopic.rd: New test.
* ld-i386/tlsnopic.sd: New test.
* ld-i386/tlspic1.s: New test.
* ld-i386/tlspic2.s: New test.
* ld-i386/tlspic.dd: New test.
* ld-i386/tlspic.rd: New test.
* ld-i386/tlspic.sd: New test.
* ld-i386/tlspic.td: New test.
From matthew green <mrg@redhat.com>
* ppc.h (PPC_OPCODE_SPE): New opcode flag for Powerpc e500
instructions.
(PPC_OPCODE_ISEL, PPC_OPCODE_BRLOCK, PPC_OPCODE_PMR,
PPC_OPCODE_CACHELCK, PPC_OPCODE_RFMCI): New opcode flags for the
e500x2 Integer select, branch locking, performance monitor,
cache locking and machine check APUs, respectively.
(PPC_OPCODE_EFS): New opcode type for efs* instructions.
(PPC_OPCODE_CLASSIC): New opcode type for Classic PowerPC instructions.
EF_M68HC11_ABI): Define for ABI specification.
(STO_M68HC12_FAR, STO_M68HC12_INTERRUPT): Symbol flags for
linker and debugger.
(R_M68HC11_24, R_M68HC11_LO16, R_M68HC11_PAGE): New relocs.
(R_M68HC11_RL_JUMP, R_M68HC11_RL_GROUP): New reloc for linker
relaxation.
* sim-sh.h: Add enum constants for sh[1-4], sh3e, sh3?-dsp,
renumbering the sh-dsp registers to use distinct numbers.
sim/sh:
* Makefile.in (interp.o): Depend on $(srcroot)/include/gdb/sim-sh.h.
* interp.c: Include "gdb/sim-sh.h".
(sim_store_register, sim_fetch_register): Use constants defined there.
gdb:
* sh-tdep.c (sh_dsp_register_sim_regno): New function.
(sh_gdbarch_init): Use it for sh-dsp.
(mips_ip): Likewise.
* mips.h (INSN_MIPS16): New define.
* mips-dis.c (mips_isa_type): Add MIPS16 insn handling.
* mips-opc.c (I16): New define.
(mips_builtin_opcodes): Make jalx an I16 insn.
2002-07-01 Matt Thomas <matt@3am-software.com>
* Rename EF_* to EF_VAX_*.
bfd:
2002-07-01 Matt Thomas <matt@3am-software.com>
* elf32-vax.c (elf32_vax_print_private_bfd_data): Change EF_*
to EF_VAX_*.
binutils:
2002-07-01 Matt Thomas <matt@3am-software.com>
* readelf.c: Include "elf/vax.h".
(guess_is_rela): Move EM_VAX from unknown to RELA case.
(dump_relocations): Handle VAX relocations.
(get_machine_flags): Handle VAX machine flags.
2002-05-30 Chris G. Demetriou <cgd@broadcom.com>
Ed Satterthwaite <ehs@broadcom.com>
* config/tc-mips.c (mips_set_options): New "ase_mdmx" member.
(mips_opts): Initialize "ase_mdmx" member.
(file_ase_mdmx): New variable.
(CPU_HAS_MDMX): New macro.
(md_begin): Initialize mips_opts.ase_mdmx and file_ase_mdmx
based on command line options and configuration defaults.
(macro_build): Note in comment that use of MDMX in macros is
not currently allowed.
(validate_mips_insn): Add support for the "O", "Q", "X", "Y", and
"Z" MDMX operand types.
(mips_ip): Accept MDMX instructions if mips_opts.ase_mdmx is set,
and add support for the "O", "Q", "X", "Y", and "Z" MDMX operand
types.
(OPTION_MDMX, OPTION_NO_MDMX, md_longopts, md_parse_option):
Add support for "-mdmx" and "-no-mdmx" options.
(OPTION_ELF_BASE): Move to accomodate new options.
(s_mipsset): Support ".set mdmx" and ".set nomdmx".
(mips_elf_final_processing): Set MDMX ASE ELF header flag if
file_ase_mdmx was set.
* doc/as.texinfo: Document -mdmx and -no-mdmx options.
* doc/c-mips.texi: Likewise, and document ".set mdmx" and ".set
nomdmx" directives.
[ gas/testsuite/ChangeLog ]
2002-05-30 Chris G. Demetriou <cgd@broadcom.com>
* gas/mips/mips64-mdmx.s: New file.
* gas/mips/mips64-mdmx.d: Likewise.
* gas/mips/mips.exp: Run new "mips64-mdmx" test.
[ include/opcode/ChangeLog ]
2002-05-30 Chris G. Demetriou <cgd@broadcom.com>
* mips.h (OP_SH_ALN, OP_MASK_ALN, OP_SH_VSEL, OP_MASK_VSEL)
(MDMX_FMTSEL_IMM_QH, MDMX_FMTSEL_IMM_OB, MDMX_FMTSEL_VEC_QH)
(MDMX_FMTSEL_VEC_OB, INSN_READ_MDMX_ACC, INSN_WRITE_MDMX_ACC)
(INSN_MDMX): New constants, for MDMX support.
(opcode character list): Add "O", "Q", "X", "Y", and "Z" for MDMX.
[ opcodes/ChangeLog ]
2002-05-30 Chris G. Demetriou <cgd@broadcom.com>
Ed Satterthwaite <ehs@broadcom.com>
* mips-dis.c (print_insn_arg): Add support for 'O', 'Q', 'X', 'Y',
and 'Z' formats, for MDMX.
(mips_isa_type): Add MDMX instructions to the ISA
bit mask for bfd_mach_mipsisa64.
* mips-opc.c: Add support for MDMX instructions.
(MX): New definition.
* mips-dis.c: Update copyright years to include 2002.
* sim-d10v.h: New file. Moved from include/sim-d10v.h.
* Makefile.in (INCLUDE): Add "gdb/sim-d10v.h".
* interp.c: Include "gdb/sim-d10v.h" instead of "sim-d10v.h".
* d10v-tdep.c: Include "gdb/sim-d10v.h" instead of "sim-d10v.h".
* Makefile.in (sim_d10v_h): Update definition.
include:
* dis-asm.h (print_insn_shl, print_insn_sh64l): Remove prototype.
gdb:
* sh-tdep.c (gdb_print_insn_sh64): Delete.
(gdb_print_insn_sh): Just set info->endian and use print_insn_sh.
(sh_gdbarch_init): Always use gdb_print_insn_sh.
opcodes:
* disassemble.c (disassembler): Just use print_insn_sh for bfd_arch_sh.
* sh-dis.c (LITTLE_BIT): Delete.
(print_insn_sh, print_insn_shl): Deleted.
(print_insn_shx): Renamed to
(print_insn_sh). No longer static. Handle SHmedia instructions.
Use info->endian to determine endianness.
* sh64-dis.c (print_insn_sh64, print_insn_sh64l): Delete.
(print_insn_sh64x): No longer static. Renamed to
(print_insn_sh64). Removed pfun_compact and endian arguments.
If we got an uneven address to indicate SHmedia, adjust it.
Return -2 for SHcompact instructions.
sim/sh64:
* sim-if.c (sh64_disassemble_insn): Use print_insn_sh instead of
print_insn_shl.
* signals.h: Update comments.
(enum target_signal): Remove conditional compilation around
Mach-specific signals. Move them to after TARGET_SIGNAL_DEFAULT.
2002-03-15 Chris G. Demetriou <cgd@broadcom.com>
* config/tc-mips.c (mips_set_options): New "ase_mips3d" member.
(mips_opts): Initialize "ase_mips3d" member.
(file_ase_mips3d): New variable.
(CPU_HAS_MIPS3D): New macro.
(md_begin): Initialize mips_opts.ase_mips3d and file_ase_mips3d
based on command line options and configuration defaults.
(macro_build, mips_ip): Accept MIPS-3D instructions if
mips_opts.ase_mips3d is set.
(OPTION_MIPS3D, OPTION_NO_MIPS3D, md_longopts, md_parse_option):
Add support for "-mips3d" and "-no-mips3d" options.
(OPTION_ELF_BASE): Move to accomodate new options.
(s_mipsset): Support ".set mips3d" and ".set nomips3d".
(mips_elf_final_processing): Add a comment indicating that a
MIPS-3D ASE ELF header flag should be set, when one exists.
* doc/as.texinfo: Document -mips3d and -no-mips3d options.
* doc/c-mips.texi: Likewise, and document ".set mips3d" and ".set
nomips3d" directives.
[ gas/testsuite/ChangeLog ]
2002-03-15 Chris G. Demetriou <cgd@broadcom.com>
* gas/mips/mips64-mips3d.s: New file.
* gas/mips/mips64-mips3d.d: Likewise.
* gas/mips/mips.exp: Run new "mips64-mips3d" test.
[ include/opcode/ChangeLog ]
2002-03-15 Chris G. Demetriou <cgd@broadcom.com>
* mips.h (INSN_MIPS3D): New definition used to mark MIPS-3D
instructions.
(OPCODE_IS_MEMBER): Adjust comments to indicate that ASE bit masks
may be passed along with the ISA bitmask.
[ opcodes/ChangeLog ]
2002-03-15 Chris G. Demetriou <cgd@broadcom.com>
* mips-dis.c (mips_isa_type): Add MIPS3D instructions to the ISA
bit masks for bfd_mach_mips_sb1 and bfd_mach_mipsisa64. Add
comments for bfd_mach_mipsisa32 and bfd_mach_mipsisa64 that
indicate that they should dissassemble all applicable
MIPS-specified ASEs.
* mips-opc.c: Add support for MIPS-3D instructions.
(M3D): New definition.
* mips-opc.c: Update copyright years.
2002-03-10 Daniel Jacobowitz <drow@mvista.com>
* Makefile.in (defs_h): Add $(INCLUDE_DIR)/gdb/signals.h.
* defs.h: Include "gdb/signals.h".
(enum target_signal): Move to $(INCLUDE_DIR)/gdb/signals.h.
include/gdb:
2002-03-10 Daniel Jacobowitz <drow@mvista.com>
* signals.h: New file, split from gdb/defs.h.
Allow the user to specify functions for allocating memory for
splay tree roots and nodes.
* splay-tree.h (splay_tree_allocate_fn, splay_tree_deallocate_fn):
New types.
(splay_tree): New fields: `allocate', `deallocate', and
`allocate_data'.
(splay_tree_new_with_allocator): New function declaration.
libiberty:
* splay-tree.c (splay_tree_xmalloc_allocate,
splay_tree_xmalloc_deallocate): New functions.
(splay_tree_new): Call splay_tree_new_with_allocator, passing the
above functions and a dummy data pointer.
(splay_tree_new_with_allocator): New function.
(splay_tree_delete_helper, splay_tree_delete, splay_tree_insert,
splay_tree_remove): Use the splay tree's allocation and
deallocation functions.
2002-02-13 Matt Fredette <fredette@netbsd.org>
* elf32-m68k.c (elf32_m68k_print_private_bfd_data): Recognize
EF_M68000.
bintuls:
2002-02-13 Matt Fredette <fredette@netbsd.org>
* readelf.c (get_machine_flags): Recognize EF_M68000.
gas:
2002-02-13 Matt Fredette <fredette@netbsd.org>
* config/tc-m68k.c (md_show_usage): No longer display a
hard-coded "68020" for the default CPU, instead display the
canonical name of the true, configured default CPU.
(m68k_elf_final_processing): Mark objects for sub-68020
CPUs with the new EF_M68000 flag.
include/elf:
2002-02-13 Matt Fredette <fredette@netbsd.org>
* m68k.h (EF_M68000): Define.
2000-11-25 Hans-Peter Nilsson <hpn@cygnus.com>
* dis-asm.h (print_insn_sh64): New prototype.
(print_insn_sh64l): New prototype.
(print_insn_sh64x_media): New prototype.
[includes]
2002-02-04 Frank Ch. Eigler <fche@redhat.com>
* dis-asm.h (disassemble_info): New field `insn_sets'.
(INIT_DISASSEMBLE_INFO): Clear it.
[opcodes]
2002-02-04 Frank Ch. Eigler <fche@redhat.com>
* cgen-dis.in (print_insn_@arch@): Support disassemble_info.insn_sets.
* common.h: Update copyright years.
(NT_NETBSDCORE_PROCINFO): Define.
(NT_NETBSDCORE_FIRSTMACH): Define.
bfd:
* elf.c: Update copyright years.
(elfcore_grok_netbsd_note): Use NT_NETBSDCORE_PROCINFO
and NT_NETBSDCORE_FIRSTMACH. Improve a comment.
bintuils:
* readelf.c (get_netbsd_elfcore_note_type): Use
NT_NETBSDCORE_PROCINFO and NT_NETBSDCORE_FIRSTMACH.
* config/tc-ppc.c (md_parse_option): BookE is not Motorola specific.
[include/opcode/ChangeLog]
* ppc.h (PPC_OPCODE_BOOKE): BookE is not Motorola specific.
(PPC_OPCODE_BOOKE64): Likewise.
include/elf/ChangeLog
* external.h (Elf_External_Sym_Shndx): Declare.
* internal.h (struct elf_internal_sym <st_shndx>): Make it an
unsigned int.
* common.h (SHN_BAD): Define.
bfd/ChangeLog
* configure.in: Bump bfd version.
* configure: Regenerate.
* elf-bfd.h (elf_size_info <swap_symbol_out>): Add shndx param.
(bfd_elf32_swap_symbol_in): Likewise.
(bfd_elf32_swap_symbol_out): Likewise.
(bfd_elf64_swap_symbol_in): Likewise.
(bfd_elf64_swap_symbol_out): Likewise.
(elf_reloc_cookie): Add locsym_shndx field. Make locsyms a PTR.
(elf_obj_tdata): Add num_elf_sections, symtab_shndx_hdr and
symtab_shndx_section.
(elf_numsections): Define.
(elf_symtab_shndx): Define.
* elf.c (setup_group): Use elf_numsections rather than header e_shnum.
(bfd_elf_find_section): Likewise.
(bfd_section_from_elf_index): Likewise.
(bfd_section_from_shdr): Likewise. Handle SHT_SYMTAB_SHNDX.
(bfd_section_from_r_symndx): Read symbol shndx extension, and
translate st_shndx for > SHN_HIRESERVE.
(assign_section_numbers): Skip reserved sections. Assign
symtab_shndx_section and elf_numsections. Exclude reserved
sections from e_shnum. Set up symtab_shndx_hdr.
(_bfd_elf_compute_section_file_positions): Handle symtab_shndx_hdr.
(map_sections_to_segments): Don't map eh_frame_hdr unless required.
(assign_file_positions_except_relocs): Use elf_numsections rather
than header e_shnum. Skip reserved sections and symtab_shndx_section.
(prep_headers): Set name for symtab_shndx_hdr.
(_bfd_elf_assign_file_positions_for_relocs): Use elf_numsections.
(_bfd_elf_write_object_contents): Likewise. Skip reserved sections.
(_bfd_elf_section_from_bfd_section): Check bfd_{abs,com,und}_section
first. Use elf_section_data if available. Use elf_numsections.
Start scan at index 1.
(copy_private_bfd_data ): Comment fixes.
(MAP_ONESYMTAB): Define above SHN_HIOS.
(MAP_DYNSYMTAB): Likewise.
(MAP_STRTAB): Likewise.
(MAP_SHSTRTAB): Likewise.
(MAP_SYM_SHNDX): New define.
(_bfd_elf_copy_private_symbol_data): Handle symtab_shndx_section.
(swap_out_syms): Swap out SHT_SYMTAB_SHNDX section too.
* elfcode.h (elf_swap_symbol_in): Add shndx param, and handle shndx
extension.
(elf_swap_symbol_out): Likewise.
(elf_object_p): Set elf_numsections, and use instead of e_shnum.
Initialialise reserved elf_elfsections to point at shdr[0]. Remove
redundant bfd_release calls.
(elf_slurp_symbol_table): Read symbol shndx extension, and use with
elf_swap_symbol_in. Translate st_shndx for > SHN_HIRESERVE too.
* elflink.h (elf_link_is_defined_archive_symbol): Read symbol shndx
extension, and use with elf_swap_symbol_in.
(elf_link_record_local_dynamic_symbol): Likewise.
(elf_link_add_object_symbols): Likewise. Also translate st_shndx
for elf sections > SHN_HIRESERVE.
(NAME(bfd_elf,size_dynamic_sections)): Adjust elf_swap_symbol_out
call.
(struct elf_final_link_info): Add locsym_shndx and symshndxbuf.
(elf_bfd_final_link): Allocate the above, and tidy code allocating
other buffers. Use elf_numsections instead of e_shnum. Adjust
elf_swap_symbol_out calls.
(elf_link_output_sym): Swap out symbol shndx extension too.
(elf_link_flush_output_syms): And flush them to disk.
(elf_link_output_extsym): Use SHN_BAD. Adjust elf_swap_symbol_out
calls.
(elf_gc_mark): Read symbol shndx extension, and use with
elf_swap_symbol_in.
(elf_link_input_bfd): Likewise, Translate st_shndx for elf sections
> SHN_HIRESERVE too. Use SHN_BAD.
(elf_reloc_symbol_deleted_p): Use symbol shndx extensions with
elf_swap_symbol_in. Translate st_shndx > SHN_HIRESERVE too.
(elf_bfd_discard_info): Read symbol shndx extension. Don't attempt
to continue after a bfd error.
* elf-m10200.c (mn10200_elf_relax_section): Only read local syms.
Stash them immediately to symtab_hdr->contents rather than later
in multiple places. Clean up afterwards. Read symbol shndx
extension, and use with swap_symbol_in. Translate SHN_UNDEF,
SHN_ABS, SHN_COMMON and elf sections > SHN_HIRESERVE to bfd
sections too. Remove dead code.
(mn10200_elf_relax_delete_bytes): Use symbol shndx extension
when swapping in symbols. Tidy code adjusting global syms.
Don't swap in global syms.
(mn10200_elf_symbol_address_p): Likewise. Remove extsyms param.
(mn10200_elf_get_relocated_section_contents): Read symbol shndx
extension, and use with swap_symbol_in. Rename "size" -> "amt"
to maximize code in common with other files. Translate st_shndx
for > SHN_HIRESERVE too. Remove dead code.
* elf-m10300.c (mn10300_elf_relax_section): Only read local syms.
Stash them immediately to symtab_hdr->contents rather than later
in multiple places. Clean up afterwards. Read symbol shndx
extension, and use with swap_symbol_in. Remove dead code.
(mn10300_elf_relax_delete_bytes): As for elf-m10200.c.
(mn10300_elf_symbol_address_p): Likewise.
(mn10300_elf_get_relocated_section_contents): Likewise.
* elf32-h8300.c (elf32_h8_relax_section): As for elf-m10300.c.
(elf32_h8_relax_delete_bytes): Likewise.
(elf32_h8_symbol_address_p): Likewise.
(elf32_h8_get_relocated_section_contents): Likewise.
* elf32-hppa.c (elf32_hppa_size_stubs): Read symbol shndx
extension, and use with swap_symbol_in.
* elf64-hppa.c (elf64_hppa_check_relocs): Likewise.
* elf32-i370.c (i370_elf_finish_dynamic_sections): Adjust call to
bfd_elf32_swap_symbol_out.
* elf32-m32r.c (m32r_elf_get_relocated_section_contents): Translate
elf sections > SHN_HIRESERVE too.
* elf32-m68k.c (bfd_m68k_elf32_create_embedded_relocs): Only read
local syms. Read symbol shndx extension, and use with swap_symbol_in.
* elf32-mips.c (_bfd_mips_elf_final_write_processing): Use
elf_numsections rather than header e_shnum.
* elf32-sh.c (sh_elf_relax_section): As for elf-m10300.c.
(sh_elf_relax_delete_bytes): Likewise.
(sh_elf_get_relocated_section_contents): Likewise. Only read local
symbols.
* elf32-v850.c (v850_elf_symbol_processing): Use an unsigned int to
hold section index. Use elf_numsections rather than e_shnum.
Rename "index" -> "indx" to avoid shadowing warning.
(v850_elf_add_symbol_hook): Likewise.
* elf64-alpha.c (elf64_alpha_relax_section): Only read local syms.
Read symbol shndx extension, and use with swap_symbol_in.
* elf32-xstormy16.c (xstormy16_elf_relax_section): Likewise.
Translate SHN_COMMON and elf sections > SHN_HIRESERVE too.
* elfxx-ia64.c (elfNN_ia64_relax_section): Likewise.
(elfNN_ia64_aix_add_symbol_hook): Use elf_numsections.
* elf-m10300.c (mn10300_elf_gc_mark_hook): Remove unnecessary checks
before calling bfd_section_from_elf_index on local syms.
* elf32-arm.h (elf32_arm_gc_mark_hook): Likewise.
* elf32-avr.c (elf32_avr_gc_mark_hook): Likewise.
* elf32-cris.c (cris_elf_gc_mark_hook): Likewise.
* elf32-d10v.c (elf32_d10v_gc_mark_hook): Likewise.
* elf32-fr30.c (fr30_elf_gc_mark_hook): Likewise.
* elf32-hppa.c (elf32_hppa_gc_mark_hook): Likewise.
* elf32-i386.c (elf_i386_gc_mark_hook): Likewise.
* elf32-m32r.c (m32r_elf_gc_mark_hook): Likewise.
* elf32-m68k.c (elf_m68k_gc_mark_hook): Likewise.
* elf32-mcore.c (mcore_elf_gc_mark_hook): Likewise.
* elf32-mips.c (_bfd_mips_elf_gc_mark_hook): Likewise.
* elf32-openrisc.c (openrisc_elf_gc_mark_hook): Likewise.
* elf32-ppc.c (ppc_elf_gc_mark_hook): Likewise.
* elf32-s390.c (elf_s390_gc_mark_hook): Likewise.
* elf32-sh.c (sh_elf_gc_mark_hook): Likewise.
* elf32-sparc.c (elf32_sparc_gc_mark_hook): Likewise.
* elf32-v850.c (v850_elf_gc_mark_hook): Likewise.
* elf32-xstormy16.c (xstormy16_elf_gc_mark_hook): Likewise.
* elf64-mips.c (mips_elf64_gc_mark_hook): Likewise.
* elf64-mmix.c (mmix_elf_gc_mark_hook): Likewise.
* elf64-ppc.c (ppc64_elf_gc_mark_hook): Likewise.
* elf64-s390.c (elf_s390_gc_mark_hook): Likewise.
* elf64-x86-64.c (elf64_x86_64_gc_mark_hook): Likewise.
binutils/ChangeLog
* readelf.c (symtab_shndx_hdr): New global.
(SECTION_HEADER_INDEX): Define.
(SECTION_HEADER_NUM): Define.
(SECTION_HEADER): Define.
(GET_ELF_SYMBOLS): Pass two params rather than three.
(get_32bit_elf_symbols): Take file and section args. Read and
use SHT_SYMTAB_SHNDX.
(get_64bit_elf_symbols): Likewise.
(dump_relocations): Use SECTION_HEADER to index "section_headers".
(process_section_headers): Likewise. Use SECTION_HEADER_NUM too.
Remember symtab_shdx_hdr.
(process_program_headers): Scan from index 1 for segment map.
(slurp_ia64_unwind_table): Use SECTION_HEADER to index
"section_headers".
(process_relocs): Likewise. Also adjust call to GET_ELF_SYMBOLS.
(process_unwind): Likewise.
(process_version_sections): Likewise.
(process_symbol_table): Likewise.
(display_debug_info): Likewise.
(process_dynamic_segment): Fake up a symtab section for changed
GET_ELF_SYMBOLS.
(get_symbol_index_type): Check SHN_LOOS before SHN_LORESERVE.
(process_program_headers): Kill signed/unsigned warning.
(load_debug_str): Likewise.
(display_debug_info): Likewise.
2001-12-07 Geoffrey Keating <geoffk@redhat.com>
Richard Henderson <rth@redhat.com>
Corinna Vinschen <vinschen@redhat.com>
* Makefile.am: Add support for xstormy16.
* archures.c: Add support for xstormy16.
* config.bfd: Add support for xstormy16.
* configure.in: Add support for xstormy16.
* reloc.c: Add support for xstormy16.
* targets.c: Add support for xstormy16.
* cpu-xstormy16.c: New file.
* elf32-xstormy16.c: New file.
* Makefile.in: Regenerated.
* bfd-in2.h: Regenerated.
* configure: Regenerated.
* libbfd.h: Regenerated.
Index: binutils/ChangeLog
2001-12-07 Geoffrey Keating <geoffk@redhat.com>
* readelf.c (guess_is_rela): Add support for stormy16.
(dump_relocations): Likewise.
(get_machine_name): Likewise.
Index: gas/ChangeLog
2001-12-07 Geoffrey Keating <geoffk@redhat.com>
Richard Henderson <rth@redhat.com>
* configure.in: Add support for xstormy16.
* configure: Regenerated.
* Makefile.am: Add support for xstormy16.
* Makefile.in: Regenerated.
* config/tc-xstormy16.c: New file.
* config/tc-xstormy16.h: New file.
Index: gas/testsuite/ChangeLog
2001-12-07 Geoffrey Keating <geoffk@redhat.com>
matthew green <mrg@redhat.com>
* gas/xstormy16/allinsn.d: New file.
* gas/xstormy16/allinsn.exp: New file.
* gas/xstormy16/allinsn.s: New file.
* gas/xstormy16/allinsn.sh: New file.
* gas/xstormy16/gcc.d: New file.
* gas/xstormy16/gcc.s: New file.
* gas/xstormy16/gcc.sh: New file.
* gas/xstormy16/reloc-1.d: New file.
* gas/xstormy16/reloc-1.s: New file.
* gas/xstormy16/reloc-2.d: New file.
* gas/xstormy16/reloc-2.s: New file.
Index: ld/ChangeLog
2001-12-07 Geoffrey Keating <geoffk@redhat.com>
Richard Henderson <rth@redhat.com>
* Makefile.am: Add support for xstormy16.
* configure.tgt: Add support for xstormy16.
* Makefile.in: Regenerate.
* emulparams/elf32xstormy16.sh: New file.
* scripttempl/xstormy16.sc: New file.
Index: opcodes/ChangeLog
2001-12-07 Geoffrey Keating <geoffk@redhat.com>
* Makefile.am: Add support for xstormy16.
* Makefile.in: Regenerate.
* configure.in: Add support for xstormy16.
* configure: Regenerate.
* disassemble.c: Add support for xstormy16.
* xstormy16-asm.c: New generated file.
* xstormy16-desc.c: New generated file.
* xstormy16-desc.h: New generated file.
* xstormy16-dis.c: New generated file.
* xstormy16-ibld.c: New generated file.
* xstormy16-opc.c: New generated file.
* xstormy16-opc.h: New generated file.
Index: include/ChangeLog
2001-12-07 Geoffrey Keating <geoffk@redhat.com>
* dis-asm.h (print_insn_xstormy16): Declare.
Index: include/elf/ChangeLog
2001-12-07 Geoffrey Keating <geoffk@redhat.com>
Richard Henderson <rth@redhat.com>
* common.h (EM_XSTORMY16): Define.
* xstormy16.h: New file.
* doc/binutils.texi (objdump): Document x86 -M options.
include/ChangeLog
* dis-asm.h (print_insn_i386): Declare.
opcodes/ChangeLog
* disassemble.c (disassembler): Call print_insn_i386.
* i386-dis.c (SUFFIX_ALWAYS): Define.
(struct dis_private): Add orig_sizeflag.
(print_insn_i386): Make it a wrapper, calling..
(print_insn): ..The old body of print_insn_i386. Avoid longjmp
warning without using volatile by moving orig_sizeflag to priv,
and removing inbuf. Parse disassembler_options.
(print_insn_i386_att, print_insn_i386_intel): Move initialisation
code to print_insn.
(putop): Remove #ifdef SUFFIX_ALWAYS.
accept WordReg.
* i386-dis.c (grps): Change "sldt", "str", and "smsw" entries
to "sldtQ", "strQ", "smswQ" respectively; all with Ev operand
category instead of Ew.
2001-10-17 Chris Demetriou <cgd@broadcom.com>
* gas/mips/mips.exp (sb1-ext-ps): New test to test
SB-1 core's paired-single extensions to the MIPS64 ISA.
* gas/mips/sb1-ext-ps.d: New file.
* gas/mips/sb1-ext-ps.s: New file.
[include/opcode/ChangeLog]
2001-10-17 Chris Demetriou <cgd@broadcom.com>
* mips.h (INSN_SB1): New cpu-specific instruction bit.
(OPCODE_IS_MEMBER): Allow instructions matching INSN_SB1
if cpu is CPU_SB1.
[opcodes/ChangeLog]
2001-10-17 Chris Demetriou <cgd@broadcom.com>
* mips-dis.c (mips_isa_type): Make the ISA used to disassemble
SB-1 binaries include instructions specific to the SB-1.
* mips-opc.c (SB1): New definition.
(mips_builtin_opcodes): Add SB-1 extension opcodes "div.ps",
"recip.ps", "rsqrt.ps", and "sqrt.ps".
* config/tc-ppc.c (md_parse_option): New -m7410, -m7450 and -m7455
flags, equivalent to -m7400. New -maltivec to enable AltiVec
instructions. New -mbook64 and -mbooke/-mbooke32 flags to enable
64-bit and 32-bit BookE support, respectively. Change -m403 and
-m405 to set PPC403 option.
(md_show_usage): Adjust for new options.
* doc/all.texi: Set PPC.
* doc/as.texinfo: Add PPC support and pull in c-ppc.texi.
* doc/c-ppc.texi: New file.
* doc/Makefile.am (CPU_DOCS): Add c-ppc.texi.
* doc/Makefile.in: Regenerate.
[gas/testsuite/ChangeLog]
* gas/ppc/booke.s: New test for Motorola BookE.
* gas/ppc/booke.d: New file.
* gas/ppc/ppc.exp: Test booke.s.
[include/opcode/ChangeLog]
* ppc.h (PPC_OPCODE_BOOKE, PPC_OPCODE_403): New opcode flags for
BookE and PowerPC403 instructions.
[opcodes/ChangeLog]
* ppc-opc.c (insert_de, extract_de, insert_des, extract_des): New
instruction field instruction/extraction functions for new BookE
DE form instructions.
(CT): New macro for CT field in an X form instruction.
(DE, DES, DEO, DE_MASK): New macros for DE/DES fields in DE form
instructions.
(PPC64): Don't include PPC_OPCODE_PPC.
(403): New opcode macro for PPC403 processors.
(BOOKE): New opcode macro for BookE processors.
(bce, bcel, bcea, bcela, bclre, bclrel: New BookE instructions.
(bcctre, bcctrel, be, bel, bea, bela, icbt, icbte, lwzxe): Likewise.
(dcbste, lwzuxe, luxe, dcbfe, lbzxe, lwarxe, lbzuxe): Likewise.
(stwcxe, stwxe, stxe, stwuxe, stuxe, stbxe, dcbtste, stbuxe): Likewise.
(mfapidi, dcbte, lhzxe, lhzuxe, lhaxe, lhauxe, subfe64): Likewise.
(subfeo64, adde64, addeo64, sthxe, sthuxe, subfze64): Likewise.
(subfzeo64, addze64, addzeo64, dcbie, subfme64, subfmeo64): Likewise.
(addme64, addmeo64, stdcxe., mcrxr64, lwbrxe, lfsxe, lfsuxe): Likewise.
(lfdxe, lfduxe, stwbrxe, stfsxe, stfsuxe, stfdxe, dcbae): Likewise.
(stfduxe, tlbivax, tlbivaxe, lhbrxe, ldxe, lduxe, tlbsx): Likewise.
(tlbsxe, sthbrxe, stdxe, stduxe, icbie, stfiwxe, dcbze, lbze): Likewise.
(lbzue, ldue, lhze, lhzue, lhae, lhaue, lwze, lwzue): Likewise.
(stbe, stbue, sthe, sthue, stwe, stwue, lfse, lfsue, lfde): Likewise.
(lfdue, stde, stdue, stfse, stfsue, stfde, stfdue): Likewise.
* ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc): Look
for a disassembler option of `booke', `booke32' or `booke64' to enable
BookE support in the disassembler.
(PUT_LINENO_LNNO): Use H_PUT_32/16.
* m88k.h (GET_LNSZ_SIZE, GET_LNSZ_LNNO, GET_SCN_NRELOC,
GET_SCN_NLINNO): Use H_GET_32.
(PUT_LNSZ_LNNO, PUT_LNSZ_SIZE, PUT_SCN_NRELOC, PUT_SCN_NLINNO):
Use H_PUT_32.
* ti.h: Formatting fixes. Make use of H_GET_* and H_PUT_* throughout.
* xcoff.h: White space changes.
(EM_AVR): this, redefined as in the current ELF standard.
(EM_PJ_OLD): Renamed from...
(EM_PJ): this, redefined as in the current ELF standard.
(EM_R30, EM_D10V, EM_D30V, EM_V850, EM_M32R, EM_MN10300,
EM_MN10200, EM_OPENRISC, EM_ARC_A5, EM_XTENSA): Defined as in
the current ELF standard.
(EM_CYGNUS_ARC): Removed, unused for a long time.
(struct elf_backend_data): Add elf_backend_reloc_type_class.
(_bfd_elf_reloc_type_class): New.
* elfxx-target.h (elf_backend_reloc_type_class): Define.
(elfNN_bed): Add elf_backend_reloc_type_class.
* elf.c (_bfd_elf_reloc_type_class): New.
* elf32-i386.c (elf_i386_check_relocs): Set DF_TEXTREL if the reloc
is against read-only section.
(elf_i386_size_dynamic_sections): Use DF_TEXTREL flag instead of
looking up section names for DT_TEXTREL.
(elf_i386_reloc_type_class): New.
(elf_backend_reloc_type_class): Define.
* elf32-sparc.c (elf32_sparc_check_relocs): Set DF_TEXTREL if the
reloc is against read-only section.
(elf32_sparc_size_dynamic_sections): Use DF_TEXTREL flag instead of
looking up section names for DT_TEXTREL.
(elf32_sparc_reloc_type_class): New.
(elf_backend_reloc_type_class): Define.
* elf64-sparc.c (sparc64_elf_check_relocs): Set DF_TEXTREL if the
reloc is against read-only section.
(sparc64_elf_size_dynamic_sections): Use DF_TEXTREL flag instead of
looking up section names for DT_TEXTREL.
(sparc64_elf_reloc_type_class): New.
(elf_backend_reloc_type_class): Define.
* elfxx-ia64.c (struct elfNN_ia64_link_hash_table): Add reltext field.
(elfNN_ia64_hash_table_create): Clear ia64_info.
(get_reloc_section): Set DF_TEXTREL if the reloc is against read-only
section.
(elfNN_ia64_size_dynamic_sections): Use ia64_info->reltext flag
instead of looking up section names for DT_TEXTREL.
(elfNN_ia64_reloc_type_class): New.
(elf_backend_reloc_type_class): Define.
* elflink.h (size_dynamic_sections): Add spare DT_NULL tags.
(struct elf_link_sort_rela): New.
(elf_link_sort_cmp1, elf_link_sort_cmp2, elf_link_sort_relocs): New.
(elf_bfd_final_link): Call elf_link_sort_relocs.
Convert one spare DT_NULL into DT_RELCOUNT resp. DT_RELACOUNT if
necessary.
* bfdlink.h (struct bfd_link_info): Add combreloc and
spare_dynamic_tags fields.
* emultempl/elf32.em (place_orphan): Place orphan .rel* sections
into .rel.dyn resp. .rela.dyn if combreloc.
(get_script): If .x linker script is equal to .xn, only put it
once into the binary.
Add .xc and .xsc scripts.
(parse_args): Handle -z combreloc and -z nocombreloc.
* scripttempl/elf.sc (.rela.sbss): Fix a typo.
For .xc and .xsc scripts put all .rel* or .rela* input sections
but .rel*.plt and PLT-like sections into .rel.dyn resp. .rela.dyn.
* genscripts.sh (GENERATE_COMBRELOC_SCRIPT): Set if SCRIPT_NAME
is elf.
Strip trailing whitespace from script.
Generate .xc and .xsc scripts if requested.
* ldmain.c (main): Initialize link_info.combreloc and
link_info.spare_dynamic_tags.
* lexsup.c (OPTION_SPARE_DYNAMIC_TAGS): Define.
(ld_options): Add --spare-dynamic-tags option.
(parse_args): Likewise.
* ld.texinfo: Document -z combreloc and -z nocombreloc.
* ldint.texinfo: Document .xc and .xsc linker scripts.
* NEWS: Add notes about -z combreloc and SHF_MERGE.
2001-06-13 Geoffrey Keating <geoffk@redhat.com>
* cgen-asm.c (cgen_parse_keyword): When looking for the
boundaries of a keyword, allow any special characters
that are actually in one of the allowed keyword.
* cgen-opc.c (cgen_keyword_add): Add any special characters
to the nonalpha_chars field.
Index: cgen/ChangeLog
2001-06-13 Geoffrey Keating <geoffk@redhat.com>
* desc.scm (<keyword> 'gen-defn): Add extra zero into
CGEN_KEYWORD_ENTRY initializers.
Index: include/opcode/ChangeLog
2001-06-13 Geoffrey Keating <geoffk@redhat.com>
* cgen.h (cgen_keyword): Add nonalpha_chars field.
sections as well.
(elfNN_ia64_final_write_processing): Map .gnu.linkonce.ia64unw.FOO
to .gnu.linkonce.t.FOO text section.
* readelf.c (process_unwind): Print all unwind sections, not just
one.
* config/tc-ia64.c (special_linkonce_name): New.
(make_unw_section): Map .gnu.linkonce.t.FOO text section into
.gnu.linkonce.ia64unw{,i}.FOO.
(ia64_elf_section_type): Handle .gnu.linkonce.ia64unw{,i}.FOO.
(dot_endp): Add comment about it.
* elf/ia64.h (ELF_STRING_ia64_unwind_once): Define.
(ELF_STRING_ia64_unwind_info_once): Define.
* emulparams/elf64_ia64.sh (OTHER_READONLY_SECTIONS): Put
.gnu.linkonce.ia64unw{,i} sections into corresponding .IA_64.unwind*
output sections.
* emulparams/elf64_aix.sh (OTHER_READONLY_SECTIONS): Likewise.
* ternary.c: New file - Ternary search tree implementation.
2001-04-15 Daniel Berlin <dan@cgsoftware.com>
* ternary.h: New file - Ternary search tree header.
is_constructor and is_destructor.
(demangling_new): Initialize them.
(demangle_ctor_dtor_name): Set them, if we detect a constructor
or destructor.
(demangle_v3_with_details, is_gnu_v3_mangled_ctor,
is_gnu_v3_mangled_dtor): New functions.
* include/demangle.h (enum gnu_v3_constructor_kinds,
is_gnu_v3_mangled_ctor, enum gnu_v3_destructor_kinds,
is_gnu_v3_mangled_dtor): New declarations.
operands is greater than 127.
2001-02-02 Patrick Macdonald <patrickm@redhat.com>
* cgen.h (CGEN_SYNTAX_CHAR_TYPE): Typedef as unsigned short.
(CGEN_MAX_SYNTAX_ELEMENTS): Rename from CGEN_MAX_SYNTAX_BYTES.
(CGEN_SYNTAX): Define using CGEN_MAX_SYNTAX_ELEMENTS.
* fr30-desc.h: Regenerate with CGEN_MAX_SYNTAX_ELEMENTS.
* m32r-desc.h: Regenerate.
* cgen.h (CGEN_SYNTAX_CHAR_TYPE): New typedef based on max number
of operands (unsigned char or unsigned short).
(CGEN_SYNTAX): Changed to make array CGEN_SYNTAX_CHAR_TYPE.
(CGEN_SYNTAX_CHAR): Changed to cast to unsigned char.
DJ Delorie
H.J. Lu
Paul Brook
Mark Kettenis
Andreas Schwab
Jan Beulich
Daniel Jacobowitz
Ian Lance Taylor
Mark Mitchell
Nick Clifton
Ben Elliston
Bob Wilson
Zack Weinberg
Alan Modra
Maciej W. Rozycki
Hans-Peter Nilsson
Alexandre Oliva
Fred Fish
Richard Sandiford
Tomer Levi
Eric Christopher
Marek Michalkiewicz
Corinna Vinschen
Jim Blandy
Andrew Cagney
Michal Ludvig
Richard Earnshaw
Joern Rennecke
Chris Demetriou
Jakub Jelinek
Stan Shebs
Roland McGrath
Kevin Buettner
Dave Brolley
Jason Eckhardt
Michael Meissner
Michael Snyder
Martin Schwidefsky
Andreas Jaeger
Stephane Carrez
Jason Merrill
Svein Seldal
John David Anglin
Stan Cox
Kazu Hirata
Jim Wilson
Richard Henderson
Jason Thorpe
Klee Dienes
Kaz Kojima
Elena Zannoni
Andrey Volkov
Thiemo Seufer
Jan Hubicka
Frank Ch. Eigler
Tom Rix
David O'Brien
Graydon Hoare
Matthew Green
Jeff Law
Geoffrey Keating
Tim Wall
Denis Chertykov
Jeff Holcomb
Christopher Faylor
Charles Wilson
Aldy Hernandez
Jeff Johnston
Per Bothner
John Healy
Daniel Berlin
Phil Blundell
Patrick Macdonald