Add the --enable-newlib-reent-binary-compat configure option. This option is
disabled by default. If enabled, then unused members in struct _reent are
preserved to maintain the structure layout.
Added a new global __sglue object for all configurations.
Decouples the global file object list from the _GLOBAL_REENT
structure by using this new object instead of the __sglue member
of _GLOBAL_REENT in __sfp() and _fwalk_sglue().
Replaced _fwalk_reent() with _fwalk_sglue(). The change adds an
extra __sglue object as a parameter, which will allow the passing
of a global __sglue object separate from the __sglue member of
struct _reent. The global __sglue object will be added in a
follow-on patch.
Define the configuration-dependent constant CLEANUP_FILE for use in
cleanup_stdio(). This will reduce duplicate code during the addition
of a dedicated stdio atexit handler in a follow-on patch.
Moved last remaining __sglue initializations from __sinit() to
__sfp(). The move better encapsulates access to __sglue and
facilitates its decoupling from struct _reent in a follow-on patch.
Remove __sinit_lock_acquire() and __sinit_lock_release(). Replace these with
__sfp_lock_acquire() and __sfp_lock_release(), respectively. This eliminates a
potential deadlock issue between __sinit() and __sfp(). Remove now unused
__sinit_recursive_mutex and __lock___sinit_recursive_mutex.
Added _REENT_INIT_SGLUE and _REENT_INIT_SGLUE_ZEROED macros
to initialize __sglue member of struct _reent. This allows
further simplification of __sinit() and facilitates the removal
of __sglue as a member of struct _reent for certain configurations
in a follow-on patch.
Removed duplicate sglue initializations from __sinit(). These
are already initialized in the _REENT_INIT macro in sys/reent.h.
This simplification enables the reduction of _GLOBAL_REENT
dependency in a follow-on patch.
Removed duplicate stdio initializations from __sinit(). These
are already initialized in the _REENT_INIT macro in sys/reent.h.
This simplification enables the reduction of _GLOBAL_REENT
dependency in a follow-on patch.
../newlib/libc/libc.xml:22242: element refentry: validity error : ID iconv already defined
<refentry id="iconv">
Use a separate namespace for chaper ids, to avoid collision between the
ids for the chapter and function 'iconv', now that iconv documentation
is generated unconditionally.
Unless make is invoked with V=1, have xmlto pass the parameter
'man.output.quietly=1' to xsltproc to suppress "Note: Writing foo.N"
output from the manpages stylesheet.
(This doesn't quite do what it says: The output is not silenced if V has
any value, including 0. You could consider that either a bug or a
feature.)
Simplify rules for creating docbook XML used to create manpages:
Updating the output using move-if-change and then unconditionally
touching the .stamp file doesn't make much sense.
The ndbm.c build broke with:
Commit 357d7fcc6
In <stdio.h> provide only necessary types
The above commit exposed a latent missing-header bug:
newlib/newlib/libc/include/ndbm.h:83:38: error: unknown type name ‘mode_t’
Signed-off-by: Dimitar Dimitrov <dimitar@dinux.eu>
The nano malloc build broke with:
Commit 357d7fcc6
In <stdio.h> provide only necessary types
The above commit exposed a latent missing-header bug:
newlib/libc/stdlib/nano-mallocr.c:220:33: error: ‘uintptr_t’ undeclared (first use in this function)
Fix by including <stdint.h>.
Signed-off-by: Dimitar Dimitrov <dimitar@dinux.eu>
Remove the pointer indirection through the read-only _global_impure_ptr and
directly use a externally visible _impure_data object of type struct _reent.
This enables the static initialization of global data structures in a follow up
patch. In addition, we get rid of a machine-specific file.
By including sys/_stdint.h, all types from stdint.h are
exposed even if stdint.h isn't pulled in explicitely. Include
<machine/_default_types.h instead. Fix up newlib and Cygwin
files which rely on stdint.h types, too.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- from Brian Inglis <Brian.Inglis@systematicsw.ab.ca>
- add support to _tzset_unlocked_r() to support quoting std and dst
names with angle brackets <> as per Posix
- modify documentation of tzset.c
This fixes a bug introduced in a previous patch (Commit 44b60f0c:
Make __sdidinit unused). Removed intitialization of __cleanup from
__smakebuf_r(). All callers of __smakebuf_r() call __sinit()
through the_CHECK_INIT macro, thus __cleanup is already
initialized. This fix also allows _cleanup_r() to be made static.
Changed its name to cleanup_stdio() and removed its declaration
from local.h.
Rename __sfmoreglue() in sfmoreglue() and make it static. This function is
only used by __sfp() in the same translation unit.
Remove use of register keyword.
[PATCH] newlib: Only call _fputwc_r if ELIX_LEVEL >= 4
(nano-)vfprintf.c is enabled for ELIX_LEVEL >= 1. When _WIDE_ORIENT
is set, its __sprint_r / __sfputs_r functions unconditionally called
_fputwc_r which is only in ELEX_LEVEL >= 4. With this commit,
the _WIDE support in (nano-)vfprintf.c is disabled for ELEX_LEVEL < 4.
This code has not been updated since 2016, and it looks like it has
rotted quite a bit since. It does not build against the current set
of phoenix sources -- I had to hack both the kernel headers and the
newlib headers up to get it to build, and I still have no idea if it
actually links or runs. It seems like the project itself has moved
away from newlib and to its own C library:
https://phoenix-rtos.com/documentation/libc/README.md
So since there's no interest from the phoenix folks to maintain this,
and it has a significant amount of non-standard code that we try to
keep up-to-date (without actually testing it), just punt it all.
The recent makefile reorganization broke the amdgcn port by creating
duplicate __malloc_lock symbols. This patch fixes the problem by renaming
the malloc_support.c file to mlock.c, thus overriding the default symbol
properly. Actually, I'm not sure how this ever worked?
I've had this lying around for probably a year or two at this point.
It just changes all the instance of "errno" from a common symbol to an
extern. I can't offhand recall where the actual definition is, but it
certainly exists in the generic code.
This was disabled as part of the migration away from the cygnus option
as that implied no-dependencies.
We currently have 1-to-1 updates enabled -- if you touch a .c file,
the corresponding .o file will be rebuilt. But if you touch a header
file, none of the files using that get rebuilt.
Integrate the old libm/test/ subdir into the main build. It hasn't
been used in a long time causing the code to rot a bit. I've fixed
some of those, but it still fails for many ports, so it's disabled
by default. People who want to take a closer look can run:
$ make libm/test/test
To help prevent people from missing running this script, integrate it
into the build via maintainer mode.
Also fix the inverted exit status to make this work correctly -- for
some reason, it exited 1 when it worked, and 0 when it failed.
Replace all of the individual autotool steps with a single autoreconf.
This simplifies the documentation greatly, and in the current system,
only takes ~10 seconds to regenerate everything.
Update the developer documentation to cover all the major components
of the current build system. Hopefully this is a fairly complete road
map to everything. I tried to include everything that I wish I knew
when I started hacking on this :P.
Convert all the libc/ subdir makes into the top-level Makefile. This
allows us to build all of libc from the top Makefile without using any
recursive make calls. This is faster and avoids the funky lib.a logic
where we unpack subdir archives to repack into a single libc.a. The
machine override logic is maintained though by way of Makefile include
ordering, and source file accumulation in libc_a_SOURCES.
There's a few dummy.c files that are no longer necessary since we aren't
doing the lib.a accumulating, so punt them.
The winsup code has been pulling the internal newlib ssp library out,
but that doesn't exist anymore, so change that to pull the objects.
Rather than define per-object rules in the Makefile, have small files
that define & include the right content. This simplifies the build
rules, and makes understanding the source a little easier (imo) as it
makes all the subdirs behave the same: you have 1 source file and it
produces 1 object. It's also about the same amount of boiler plate,
without having to define custom build rules that can fall out of sync.
We also realign the free & pvalloc definitions: common code puts these
in malloc.o & valloc.o respectively, not in free.o & pvalloc.o objects.
This will also be important as we merge the libc.a build into the top
dir since it relies on a single flat list of objects for overrides.
The mallopt symbol is defined in tiny-malloc.c, not mallocr.c, but
the Makefile in here tries to compile it out of the latter. This
leads to mallopt never being defined.
The build also creates mallinfo.o & mallopt.o & mallstats.o objects
to override common ones, but the common dir doesn't use these names.
Instead, it places these all in mstats.o.
So move the build define logic to a dedicated file and compile it
directly to make things a bit simpler while fixing the missing func
and aligning objects with the cmomon code.
Rather than define per-object rules in the Makefile, have small files
that define & include the right content. This simplifies the build
rules, and makes understanding the source a little easier (imo) as it
makes all the subdirs behave the same: you have 1 source file and it
produces 1 object. It's also about the same amount of boiler plate,
without having to define custom build rules that can fall out of sync.
This will also be important as we merge the libc.a build into the top
dir since it relies on a single flat list of objects for overrides.
Also take the opportunity to clean up the unnecessary header deps in
here. Automake provides dependency generation for free now.
Some awk implementations such as old versions of mawk do not support the
length() function. Use the return value of the POSIX split() function instead.
This file is a little confusing: it provides all of the mallocr logic,
but is compiled multiple times to produce a unique symbol each time.
For example, building mallocr.c with -DDEFINE_FREER produces freer.o
that only defines _free_r(). This is fine for most symbols, but it's
a little confusing when defining mallocr itself -- we produce a file
with the same symbol name, but we still need -DDEFINE_MALLOCR. In
order to move the logic from the build rules to source files, using
mallocr.c both as a multiplexer and for defining a single symbol is a
bit tricky. It's possible (if we add a lot of redundant preprocessor
checks to mallocr.c, or we add complicated build flags just for this
one files), but it's easier if we simply rename this to a dedicated
file. So let's do that.
We do this as a dedicated commit because the next one will create a
new mallocr.c file and git's automatic diff algorithms can handle
trivial renames, but it can't handle renames+creates in the same
commit.
Simplify the build system logic a bit by moving the mallocr.c ->
nano-mallocr.c redirection from the Makefile to the source files.
This allows for consistent object name usage regardless of the
configuration options used in case a machine dir wants to define
its own override.
Since we already set up _LIBC to indicate source files are building
for newlib, we don't need this malloc-specific symbol. Convert it
over to simplify the build a bit.
The current targ-include setup runs `cp` every header file it installs,
in serial. This can be a little noticeable on systems, so cleanup the
logic to rely on cp's ability to copy multiple files to a directory in
a single call.
We still need a check for empty directories with no headers (i.e. the
glob doesn't match anything), so add a helper variable to contain that
logic to reduce the boiler plate a little.
Rather than define per-object rules in the Makefile, have small files
that define & include the right content. This simplifies the build
rules, and makes understanding the source a little easier (imo) as it
makes all the subdirs behave the same: you have 1 source file and it
produces 1 object. It's also about the same amount of boiler plate,
without having to define custom build rules that can fall out of sync.
Some of these rules were already unnecessary as they were compiling a
single source file into the same named object w/out custom flags, and
Automake handles that for us completely.
This will also be important as we merge the libc.a build into the top
dir since it relies on a single flat list of objects for overrides.
Also take the opportunity to clean up the unnecessary header deps in
here. Automake provides dependency generation for free now.
Since POSIX cp requires copying a file to a directory without having
to specify the name explicitly, rely on that to avoid calling basename
on every source file.
We can also drop the stub `true` call if the -f test failed. The use
of `if` already takes care of that in POSIX shell.
This kills off the last configure script under libc/ and folds it
into the top newlib configure script. The a lot of the logic was
already in the top configure script, so move what's left into a
libc/acinclude.m4 file.
I split libg.a out into a sep target from libc.a for the main dir in
commit f2b053f49e ("newlib: separate out
libg from libc"), but missed the multilib dirs. That leads to an
uncommon parallel build failure:
- libc.a rule runs & finishes
- $(BUILD_MULTISUBDIR)/libc.a rule runs
-> failure due to libg.a not yet existing
- libg.a rule runs & finishes
Split the multilib libg rule out from libc too so it can depend on the
main libg directly and avoid this race.
Remove dependency on __sdidinit member of struct _reent to check
object initialization. Like __sdidinit, the __cleanup member of
struct _reent is initialized in the __sinit() function. Checking
initialization against __cleanup serves the same purpose and will
reduce overhead in the __sfp() function in a follow up patch.
The crt0.o was handled in a subdir-by-subdir basis: it would be compiled
in one (e.g. libc/sys/$arch/), then copied up one level (libc/sys/), then
copied up another (libc/) before finally being copied & installed in the
top newlib dir. The libc/sys/ copy was cleaned up, and then the top dir
was changed to copy it directly out of the libc/sys/$arch/ dir. But the
libc/sys/ copy to libc/ was left behind. Clean that up now too.
These headers aren't installed, so use "" includes instead of <> so
we don't search system header paths. This matches the style used
elsewhere in the tree for these local headers, and makes it work
w/out explicit -I flags (as needed with non-recursive make).
Convert all the libm/ subdir makes into the top-level Makefile. This
allows us to build all of libm from the top Makefile without using any
recursive make calls. This is faster and avoids the funky lib.a logic
where we unpack subdir archives to repack into a single libm.a. The
machine override logic is maintained though by way of Makefile include
ordering, and source file accumulation in libm_a_SOURCES.
One thing to note is that this will require GNU Make because of:
libm_a_CFLAGS = ... $(libm_a_CFLAGS_$(subst /,_,$(@D)))
This was the only way I could find to supporting per-dir compiler
settings, and I couldn't find a POSIX compatible way of transforming
the variable content. I don't think this is a big deal as other
Makefiles in the tree are using GNU Make-specific syntax, but I call
this out as it's the only one so far in the new automake code that
I've been writing.
Automake doesn't provide precise control over the output object names
(by design). This is fine by default as we get consistent names in all
the subdirs: libm_a-<source>.o. But this relies on using the same set
of compiler flags for all objects. We currently compile libm/common/
with different optimizations than the rest.
If we want to compile objects differently, we can create an intermediate
archive with the subset of objects with unique flags, and then add those
objects to the main archive. But Automake will use a different prefix
for the objects, and thus we can't rely on ordering to override.
But if we leverage $@, we can turn Automake's CFLAGS into a multiplex
on a per-dir (and even per-file if we wanted) basis. Unfortunately,
since $@ contains /, Automake complains it's an invalid name. While
GNU Make supports this, it's a POSIX extension, so Automake flags it.
Using $(subst) avoids the Automake warning to get a POSIX compliant
name, albeit with a GNU Make extension.
Make this a separate target from libc so that we can migrate libc over
to automake more easily. Having it integrated into the libc target is
difficult to handle when using automake rules which expect a one-to-one
mapping between names & inputs.
When migrating the manual to the top-level, the include order was
sorted by name of the subdir. But this changed the chapter order
of the manual in the process. Change the sorting back to match
existing chapters and update the comments to explain.
Using xxx_LIBADD, xxx_DEPENDENCIES, and EXTRA_xxx_SOURCES is one way of
conditionally including files into a target. But it's meant more for the
cases where the variables added to LIBADD & DEPENDENCIES are constructed
via substitution (e.g. AC_SUBST) or other dynamic methods. With Automake
conditionals, then the much simpler form is to conditionally append to
the xxx_SOURCES variable and let Automake sort everything out.
Commit 8fa73a9f84 changed how fenv.c is
compiled wrt mips16 targets used the wrong variable to add fenv.o to
libm.a. Fix that thinko so it's included in the build again.
The top-level newlib dir already takes care of recursing into the
sys/xxx/include/ subdirs and installing any headers found, so the
rtems subdir doesn't need to do this itself.
Replace the custom build rules (which require copying & pasting from the
current Makefile) with small stub files. This allows us to drop the rules
entirely and let Automake provide everything.
These subdirs don't actually use anything from libm. The common dir
in particular only has 4 header files, and none are included here.
The xstormy16 code has a comment mentioning why this hack is here, but
it refers to code that was removed when its configure script was merged
up a level.
This is used in a bunch of places, but nowhere is it ever set, and
nowhere can I find any documentation, nor can I find any other project
using it. So delete the flags to simplify.
These targets don't actually cross-compile -- they try to pull some
objects out of the host's /lib/libc.a, /lib/libm.a, and /lib/crt0.o
directly and merge them into newlib's own libraries. This is hard
to keep working and impossible to test. Considering the vintage of
such targets, and gcc dropping them many many years ago, drop them
from newlib too. This will make cleaning up the build a lot easier.
The machine/{configure,Makefile} files exist only to fan out to the
specific machine/$arch/ subdir. We already have all that same info
in the phoenix/ dir itself, so by moving the recursive configure and
make calls into it, we can cut off this logic entirely and save the
overhead.
These were never added to the tree, and as we transition from autoconf
to automake, it really wants the latter subdirs to always exist. These
don't, so delete the logic.
The original cut for small arguments at |x|<2**-70 (copied from the
double version) produces that when computing nadj we get a subnormal
number for t*x and thus, the division of pi/subnormal will be INF and
the logarithm of it too, which is wrong as a result for lgammaf in this
range.
The proposed new limit seems to be safe and has been tested to
produce accurate results.
(Courtesy of Andreas Jung, ESA)
These look like they were just copied & pasted from common/Makefile.am.
The funcs in this dir are all stubs that don't actually call any math
or builtin functions, and a simple compile shows they produce identical
object code. So delete to simplify the build rules.
Correct the overflow limit in the variable o_threshold to be consistent
with the FLT_UWORD_LOG_MAX variable used by the internal implementation
of the expf algorithm itself.
The u_threshold variable has also been modified to be written in the
same format.
Note that this fix improves the situation but does not completely
correct the inconsistencies regarding the overflow and underflow limits
between the expf wrapper (wf_exp.c) and the expf algorithm itself
(ef_exp.c).
Currently these limits are different for the
_FLT_LARGEST_EXPONENT_IS_NORMAL and _FLT_NO_DENORMALS cases as well as
for the case where __OBSOLETE_MATH is not defined (only for the
underflow limit in this case).
This kills off the last configure script under libm/ and folds it
into the top newlib configure script. The vast majority of logic
was already in the top configure script, so move the little that
is left into a libm/acinclude.m4 file.
Make sure we depend on the right name of mkdoc all the time, and that
the rules that need it (e.g. .def files) depend on it.
Reported-by: Jon Turney <jon.turney@dronecode.org.uk>
This was only ever used for i?86-pc-linux-gnu targets, but that's been
broken for years, and has since been dropped. So clean this up too.
This also deletes the funky objectlist logic since it only existed for
the libtool libraries. Since it was the only thing left in the small
Makefile.shared file, we can punt that too.
This was only used by the i?86-pc-linux-gnu target which we've removed,
and even though it's using a "sys/linux/" dir to make it sound like it
only depends on the Linux kernel, it's actually tied to glibc APIs built
on top of Linux. Since the code relies on internal glibc APIs and has
been broken for some time, punt it all. If someone wants to bring it
back, they can try and actually keep the Linux-vs-glibc APIs separate.
This was added 20+ years ago. It seems to have very few (or no users)
as it only works on 32-bit x86 GNU/Linux (i.e. glibc) systems, and even
then only with old versions of glibc. It hasn't compiled in at least 5
years, but most likely been broken for more like 15 years -- it relies
on internal glibc APIs (like linuxthreads), and that code has changed
and been deleted significantly since.
This single target ends up dragging in a lot of non-trivial code that is
hard to keep working, and currently impossible to verify -- the libtool
and iconvdata and sys/linux/ code isn't used by anything else, but ends
up touching just about every build file in the tree. Punt the target so
we can start stripping out all these unique code paths.
This commit by itself just disables the target. We'll start deleting the
individual unused pieces in followups.
Now that we use AC_NO_EXECUTABLES, and we require a recent version of
autoconf, we don't need to define our own copies of these macros. So
switch to the standard AC_PROG_CC.
This logic was added to libc & libm to get it working again after some
reworks in the CPP handling, but now that that's settled, let's move
this to the common newlib configure logic. This will make it easier
to consolidate all the configure calls into the top-level newlib dir.
This does create a lot of noise in the generate scripts, but that's
because of the ordering of the calls, not because of correctness. We
will try to draw that back down in follow up commits as we modernize
the toolchain calls in here.
This code is a bit more convoluted than it needs to be. GPR_SOURCES
is never set to anything, and the automake checks use negative logic
to add the SP & DP source files to dedicated variables that are only
expanded once. Get rid of the unused variable, use normal boolean
logic, and collapse the source settings into a single variable.
This allows building the libc & libm pages in parallel, and drops
the duplication in the subdirs with the chew/chapter settings.
The unused rules in Makefile.shared are left in place to minimize
noise in the change.
This doesn't migrate all the docs, just the libc's manual (pdf/info).
This is to show the basic form of migrating the chew files.
For subdirs that didn't have any docs, I've stripped their settings
for clarity. If someone wanted to suddenly add docs, they can add
the corresponding Makefile.inc files easily.
THe stdio subdir is actually required by the documentation. The
stdio/def is handled dynamically, but libc.texi always expects it
to be included, and fails if it isn't. So making it required when
building docs is safe.
The xdr subdir is handled dynamically, but it doesn't include any
docs, so the dynamic logic isn't (currently) adding any value. So
making it required when building docs is safe.
That leaves: iconv, stdio64, posix, and signal subdirs. The chapters
have a little disclaimer saying they are system-dependent, but even
then, imo having stable manuals regardless of the target is preferable,
and we can add more disclaimer language to these chapters if we want.
This doesn't touch the man page codepaths, just the info/pdf.
Let automake manage whether the objects are included in lib.a. This
fixes failures after to commit 71086e8b2d
("newlib: delete (most) redundant lib_a_CCASFLAGS=$(AM_CCASFLAGS)") due
to automake generating different set of implicit rules, and the code in
here assuming the names of the generated objects.
We've been using both libc_cv_ and newlib_cv_ for our cache vars.
Let's consolidate on newlib_cv_ to avoid conflicts with glibc which
is already using the libc_cv_ prefix.
This isn't strictly necessary, but it makes for much clearer logs as
to what the target is doing, and provides cache vars for anyone who
wants to force the test a different way, and it lets the build cache
its own results when rerunning config.status.
Since commit dcbff9eea7 ("newlib: merge
iconvdata into top-level Makefile"), there is no configure script in
the iconvdata/ subdir, so this call will just issue a warning and not
do anything useful. Punt it.
Restore the call to AC_NO_EXECUTABLES -- I naively assumed in commit
2e9aa5f56c ("newlib: update preprocessor
configure checks") that checking for a preprocessor would not involve
linking code. Unfortunately, autoconf will implicitly check that the
compiler "works" before allowing it to be used, and that involves a
link test, and that fails because newlib provides the C library which
is needed to pass a link test.
There is some code in NEWLIB_CONFIGURE specifically to help mitigate
these, but it's not kicking in here for some reason, so let's just add
the AC_NO_EXECUTABLES call back until we can unwind that custom logic.
Additionally, we have to call AC_PROG_CPP explicitly. This was being
invoked later on, but only in the use_libtool=yes codepath, and that
is almost never enabled.
This code snippet assumed it was only ever run in the top configure
script where srcdir would point to newlib/ which is parallel to the
winsup/ tree. This is incorrect for all of the subdir configure
scripts leading to bad -I flags in $(CC). Switch it over to the
new abs_newlib_basedir which should work in all subdirs.
When we had configure scripts in subdirs, the newlib_basedir value
was computed relative to that, and it'd be the same when used in the
Makefile in the same dir. With many subdir configure scripts removed,
the top-level configure & Makefile can't use the same relative path.
So switch the subdir Makefiles over to abs_newlib_basedir when they
use -I to find source headers.
Do this for all subdirs, even ones with configure scripts and where
newlib_basedir works. This makes the code consistent, and avoids
surprises if the configure script is ever removed in the future as
part of merging to the higher level.
Some of the subdirs were using -I$(newlib_basedir)/../newlib/ for
some reason. Collapse those too since newlib_basedir points to the
newlib source tree already.
When using the top-level configure script but subdir Makefiles, the
newlib_basedir value gets a bit out of sync: it's relative to where
configure lives, not where the Makefile lives. Move the abs setting
from the top-level configure script into acinclude.m4 so we can rely
on it being available everywhere. Although this commit doesn't use
it anywhere, just lays the groundwork.
Commit dd23de27c8 ("newlib: libc: install
CRT0 straight out of subdir") got rid of the libc/sys/ intermediate for
copying the file up, but the top-level newlib/ dir was still expecting
a libc/crt0.o to exist so it could install. Update that to also look
for the crt0 file directly under libc/ like we already do for crt1.
The work to merge libc/machine/ up a dir lost the stub doc targets.
So when libc/ recursed into machine/, it would stop going deeper as
the doc rules were empty. But now that libc/ goes directly into the
libc/machine/$arch/ and those have never had doc stubs, the build
fails. Add a quick hack to the top dir to ignore all machine/$arch/
dirs when generating docs. A follow up series will delete all of
this code as it merges all the doc rules into the top newlib dir.
We use the common config-ml.in for configure, so switch the makefile
over to the common multilib.am. It's almost exactly the same code,
but there are two differences:
* Common code hooks install-exec-local for install-multi, but newlib
doesn't currently install any executables, so that doesn't fire.
Newlib already has install-data-local that inlined install-multi,
so switch that to the common install-multi.
* Common code doesn't provide a check-multi at all. Keep ours for
now. Some day common code might get it. Or not. Who knows.
The machine configure scripts are all effectively stub scripts that
pass the higher level options to its own makefile. There were only
three doing custom tests. The rest were all effectively the same as
the libc/ configure script.
So instead of recursively running configure in all of these subdirs,
generate their makefiles from the top-level configure. For the few
unique ones, deploy a pattern of including subdir logic via m4:
m4_include([machine/nds32/acinclude.m4])
Some of the generated machine makefiles have a bunch of extra stuff
added to them, but that's because they were inconsistent in their
configure libtool calls. The top-level has it, so it exports some
new vars to the ones that weren't already.
The sys configure scripts are almost all effectively stub scripts that
pass the higher level options to its own makefile. The phoenix & linux
ones are a bit more complicated with nested subdirs, so those have been
left alone for now. Plus, I don't really have a way of testing them.
There's no need to have a sys/ subdir just to copy the sys/$arch/crt0.o
up to sys/crt0.o, and then have libc/ copy sys/crt0.o up again. Just
have libc/ refer to sys/$arch/crt0.o directly and drop the intermediate
makefile entirely.
The sys/{configure,Makefile} files exist to fan out to the specific
sys/$arch/ subdir, and to possibly generate a crt0. We already have
all that same info in the libc/ dir itself, so by moving the recursive
configure and make calls into it, we can cut off some of this logic
entirely and save the overhead.
For arches that don't have a sys subdir, it means they can skip the
logic entirely.
The sys subdir itself is kept for the crt0 logic, for now. We'll try
and clean that up next.
The machine/{configure,Makefile} files exist only to fan out to the
specific machine/$arch/ subdir. We already have all that same info
in the libc/ dir itself, so by moving the recursive configure and
make calls into it, we can cut off this logic entirely and save the
overhead.
For arches that don't have a machine subdir, it means they can skip
the logic entirely. Although there's prob not too many of those.
The machine configure scripts are all effectively stub scripts that
pass the higher level options to its own makefile. The only one doing
any custom tests was nds32. The rest were all effectively the same as
the libm/ configure script.
So instead of recursively running configure in all of these subdirs,
generate their makefiles from the top-level configure. For nds32,
deploy a pattern of including subdir logic via m4:
m4_include([machine/nds32/acinclude.m4])
Even its set of checks are very small -- it does 2 preprocessor tests
and sets up 2 makefile conditionals.
Some of the generated machine makefiles have a bunch of extra stuff
added to them, but that's because they were inconsistent in their
configure libtool calls. The top-level has it, so it exports some
new vars to the ones that weren't already.
The machine/{configure,Makefile} files exist only to fan out to the
specific machine/$arch/ subdir. We already have all that same info
in the libm/ dir itself, so by moving the recursive configure and
make calls into it, we can cut off this logic entirely and save the
overhead.
For arches that don't have a machine subdir, it means they can skip
the logic entirely.
This makes the makefile logic a bit cleaner so we don't have two
files maintaining lists of sources & objects. Since the logic is
tied to cpu capabilities, past those boolean settings down from
the configure logic to the makefile logic.
This will also make it easier to throw away the configure script
in a follow up commit and just keep the makefile.
The nds32 & spu dirs are using compile tests to look for some
preprocessor defines, but we don't need to compile the code,
just preprocess it. So switch to AC_PREPROC_IFELSE.
The sh dir is using a preprocessor test via grep, but let's
switch it to AC_PREPROC_IFELSE too to be consistent.
This should allow us to drop the uncommon AC_NO_EXECUTABLES call.
This was added decades ago, but the commit message lacks any
explanation, and it was unused when it was merged. It's still
unused today. So punt it all.
Generating these files is very cheap, so let's just do it all the time.
This makes the build logic simpler, and keeps errors for slipping in in
codepaths that are not well tested. Creating these files doesn't mean
they'll be included in the manual implicitly.
For example, some of the nano stdio files break documentation because
they don't have any chew directives in them. But no one noticed since
that code path is rarely enabled. So drop the _i and _float def files.
This is already handled by autotools for us automatically. You can
tell as the generated output is exactly the same other than deleting
a few blank lines.
It's unclear why this was added originally, but assuming it was needed
20 years ago, it shouldn't be explicitly required nowadays. Current
versions of autotools already take care of exporting LDFLAGS to the
Makefile as needed (things are actually getting linked). That's why
the configure diffs show LDFLAGS still here, but shifted to a diff
place in the output list. A few dirs stop exporting LDFLAGS, but
that's because they don't do any linking, only compiling, so it's
correct.
As for the use of $ldflags instead of the standard $LDFLAGS, I can't
really explain that at all. Just use the right name so users don't
have to dig into why their setting isn't respected, and then use a
non-standard name instead. Adjust the testsuite to match.
The current newlib multilib logic is almost exactly the same as the
config/multi.m4, and the differences should be minor, so switch over
to that to delete custom logic on ourside.
Now that we require a recent version of autoconf, we can rely on this
macro working. This change was already made to libm, but these other
dirs were missed as I didn't notice it being duplicated in 3 places.
Now that newlib.hin has been brought up to date and all of its defines
are produced by configure, we can switch it to using autoheader without
manual editing. This relies on a few pieces:
* Moving the header & footer into configure.ac via AH_TOP & AH_BOTTOM.
* Running a post-process step on newlib.h to delete all the defines we
didn't export ourselves. Basically, anything without a _ prefix.
This will leave behind some spurious comments in newlib.h related to
the defines we filtered out, but should be harmless, so it's probably
not worth the effort to construct a more complicated sed expression to
also strip those out.
The list of iconv to/from defines is hand maintained in newlib.hin.
Lets leverage mkdeps.pl to generate this list automatically from the
list of known encodings. The newlib.hin list is up-to-date, so the
list in iconv.m4 matches the list already generated.
This was added to configure, but never to the header file. Nothing
uses this currently, so it's not a big deal (as all the dynamic logic
is via automake conditionals), but might as well restore it now to
keep autoheader output in sync.
This will make it easier to move newlib.h to use autoheader directly.
We only want the newlib version defines in our hand curated version
file, _newlib_version.h, not in the template header, newlib.h, so
using AC_DEFINE doesn't make much sense.
Sync these back from newlib.hin to configure.ac, and touchup some of
the forms to be consistent (like being full sentences). Also use the
AC_DEFINE-vs-AC_DEFINE_UNQUOTED macros correctly. This will make it
easier to re-enable autoheader for managing newlib.hin.
The acconfig.h header was used to run autoheader and then manually
sync the output into newlib.hin. Based on how the files have fallen
out of sync (with newlib.hin having many more templates), this has
not been run in a long time, and attempts to do so now would break
newlib.hin.
Further, if you try to run autoheader now, it will automatically
replace _newlib_version.hin since it's the first entry in the call
to AC_CONFIG_HEADERS.
So let's throw away acconfig.h entirely. It only had 2 slightly
better comments, and the rest were either worse, missing, or stale.
This has the side benefit of avoiding autoheader warning about the
deprecated use of acconfig.h since newer autoconf only wants macro
calls in configure.ac.
This define is only used by newlib internally, so stop exporting it
as HAVE_INITFINI_ARRAY since this can conflict with defines packages
use themselves.
We don't really need to add _ to HAVE_INIT_FINI too since it isn't
exported in newlib.h, but might as well be consistent here.
We can't (easily) add this to newlib_cflags like HAVE_INIT_FINI is
because this is based on a compile-time test in the top configure,
not on plain shell code in configure.host. We'd have to replicate
the test in every subdir in order to have it passed down.
Now that we require a recent version of autoconf, we can rely on this
macro working. We shift the call in configure.ac down a little to
help keep the generated diff minimal -- there should be no functional
difference otherwise. This is because the autoconf macros will call
a bunch of standard toolchain macros first, and arguably the current
code is incorrect in how it does its testing.
As the file comments say, this was a backport of an autoconf-2.60 fix,
and shouldn't matter for >autoconf-2.59 versions. Drop it since we use
and require autoconf-2.69 now.
Currently this is only enabled in the top-level as that's the only
place where it seemed to be used. But the libc/sys/phoenix/ dir
also uses this functionality, but fails to explicitly enable it.
Automake workedaround it, but generated warnings. Move the option
to NEWLIB_CONFIGURE so all dirs get it automatically iff they end
up using the option. If they don't use the option, there's no
difference to the generated code.
Since AM_INIT_AUTOMAKE calls AC_PROG_AWK, and some configure.ac
scripts call it too, we end up testing for awk multiple times. If
we change NEWLIB_CONFIGURE to require the macro instead, then it
makes sure it's always expanded, but only once.
While we're here, do the same thing with AC_PROG_INSTALL since it
is also called by AM_INIT_AUTOMAKE, although it doesn't currently
result in duplicate configure checks.
The AC_LIBTOOL_WIN32_DLL macro has been deprecated for a while and code
should call LT_INIT with win32-dll instead. Update the calls to match.
The generated code is noisy not because of substantial differences, but
because the order of some macros change (i.e. instead of calling AS and
then CC, CC is called first and then AS).
Since automake already sets per-library CCASFLAGS to $(AM_CCASFLAGS)
by default, there's no need to explicitly set it here.
Many of these dirs don't have .S files in the first place, so the rule
doesn't even do anything. That can easily be seen when Makefile.in has
no changes as a result.
For the dirs with .S files, the custom rules are the same as the pattern
.S.o rules, so this is a nice cleanup.
The only dir that was adding extra flags (newlib/libc/machine/mn10300/)
to the per-library setting can have it moved to the global AM_CCASFLAGS
since the subdir only has one target. Although the setting just adds
extra debugging flags, so maybe it should be deleted in general.
There are a few dirs that we leave the redundant setting in place. This
is to workaround an automake limitation in subdirs that support building
with & w/out libtool:
https://www.gnu.org/software/automake/manual/html_node/Objects-created-both-with-libtool-and-without.html
This matches what the other GNU toolchain projects have done already.
The generated diff in practice isn't terribly large. This will allow
more use of subdir local.mk includes due to fixes & improvements that
came after the 1.11 release series.
The newlib & libgloss dirs are already generated using autoconf-2.69.
To avoid merging new code and/or accidental regeneration using diff
versions, leverage config/override.m4 to pin to 2.69 exactly. This
matches what gcc/binutils/gdb are already doing.
The README file already says to use autoconf-2.69.
To accomplish this, it's just as simple as adding -I flags to the
top-level config/ dir when running aclocal. This is because the
override.m4 file overrides AC_INIT to first require the specific
autoconf version before calling the real AC_INIT.
Libtool needs to get BSD-format (or MS-format) output out of the system
nm, so that it can scan generated object files for symbol names for
-export-symbols-regex support. Some nms need specific flags to turn on
BSD-formatted output, so libtool checks for this in its AC_PATH_NM.
Unfortunately the code to do this has a pair of interlocking flaws:
- it runs the test by doing an nm of /dev/null. Some platforms
reasonably refuse to do an nm on a device file, but before now this
has only been worked around by assuming that the error message has a
specific textual form emitted by Tru64 nm, and that getting this
error means this is Tru64 nm and that nm -B would work to produce
BSD-format output, even though the test never actually got anything
but an error message out of nm -B. This is fixable by nm'ing *nm
itself* (since we necessarily have a path to it).
- the test is entirely skipped if NM is set in the environment, on the
grounds that the user has overridden the test: but the user cannot
reasonably be expected to know that libtool wants not only nm but
also flags forcing BSD-format output. Worse yet, one such "user" is
the top-level Cygnus configure script, which neither tests for
nor specifies any BSD-format flags. So platforms needing BSD-format
flags always fail to set them when run in a Cygnus tree, breaking
-export-symbols-regex on such platforms. Libtool also needs to
augment $LD on some platforms, but this is done unconditionally,
augmenting whatever the user specified: the nm check should do the
same.
One wrinkle: if the user has overridden $NM, a path might have been
provided: so we use the user-specified path if there was one, and
otherwise do the path search as usual. (If the nm specified doesn't
work, this might lead to a few extra pointless path searches -- but
the test is going to fail anyway, so that's not a problem.)
(Tested with NM unset, and set to nm, /usr/bin/nm, my-nm where my-nm is a
symlink to /usr/bin/nm on the PATH, and /not-on-the-path/my-nm where
*that* is a symlink to /usr/bin/nm.)
ChangeLog
2021-09-27 Nick Alcock <nick.alcock@oracle.com>
PR libctf/27967
* libtool.m4 (LT_PATH_NM): Try BSDization flags with a user-provided
NM, if there is one. Run nm on itself, not on /dev/null, to avoid
errors from nms that refuse to work on non-regular files. Remove
other workarounds for this problem. Strip out blank lines from the
nm output.
This reports common symbols like GNU nm, via a type code of 'C'.
ChangeLog
2021-09-27 Nick Alcock <nick.alcock@oracle.com>
PR libctf/27967
* libtool.m4 (lt_cv_sys_global_symbol_pipe): Augment symcode for
Solaris 11.
AR from older binutils doesn't work with --plugin and rc:
[hjl@gnu-cfl-2 bin]$ touch foo.c
[hjl@gnu-cfl-2 bin]$ ar --plugin /usr/libexec/gcc/x86_64-redhat-linux/10/liblto_plugin.so rc libfoo.a foo.c
[hjl@gnu-cfl-2 bin]$ ./ar --plugin /usr/libexec/gcc/x86_64-redhat-linux/10/liblto_plugin.so rc libfoo.a foo.c
./ar: no operation specified
[hjl@gnu-cfl-2 bin]$ ./ar --version
GNU ar (Linux/GNU Binutils) 2.29.51.0.1.20180112
Copyright (C) 2018 Free Software Foundation, Inc.
This program is free software; you may redistribute it under the terms of
the GNU General Public License version 3 or (at your option) any later version.
This program has absolutely no warranty.
[hjl@gnu-cfl-2 bin]$
Check if AR works with --plugin and rc before passing --plugin to AR and
RANLIB.
PR ld/27173
* configure: Regenerated.
* libtool.m4 (_LT_CMD_OLD_ARCHIVE): Check if AR works with
--plugin and rc before enabling --plugin.
config/
PR ld/27173
* gcc-plugin.m4 (GCC_PLUGIN_OPTION): Check if AR works with
--plugin and rc before enabling --plugin.
libiberty/
PR ld/27173
* configure: Regenerated.
zlib/
PR ld/27173
* configure: Regenerated.
The configure scripts were regenerated with 2.69 for the newlib-4.2.0
release in 484d2ebf8d, but the aclocal
files were not. Do that now to avoid confusion between the two as to
which version of autoconf was used.
32 bit Cygwin still exports function calls to support old applications.
E. g., when switching from 16 to 32 bit uid/gid values, new function
like getuid32 have been added and the old getuid function still only
provides 16 bit values. Newly built applications using getuid are
actually calling getuid32.
However, this link magic isn't performed inside Cygwin itself, so if
newlib functions call getuid, they actually call the old getuid, not
the new getuid32. This leads to truncated uid/gid values.
https://cygwin.com/pipermail/cygwin/2022-January/250453.html reports
how this leads to problems in posix_spawn.
Fix this temporarily. i686 support will go away soon in Cygwin and the
fix can be dropped.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
For some RTEMS multilibs, the FPU and Altivec units are disabled during
interrupt handling. Do not save and restore the corresponding registers in
this case.
Since automake deprecated the INCLUDES name in favor of AM_CPPFLAGS,
change all existing users over. The generated code is the same since
the two variables have been used in the same exact places by design.
There are other cleanups to be done, but lets focus on just renaming
here so we can upgrade to a newer automake version w/out triggering
new warnings.
This is simply reflecting reality: all the subdirs in here are already
using automake-1.11.6, so making it a requirement will allow us to stop
suggesting we might support automake-1.9 or 1.10 (which I'm fairly sure
do not work today).
This is why only acinclude.m4 changes in this patch: the generated files
are exactly the same as the directives here are automake constraints,
not generated code logic.
The 'cygnus' option was removed from automake 1.13 in 2012, so the
presence of this option prevents that or a later version of automake
being used.
A check-list of the effects of '--cygnus' from the automake 1.12
documentation, and steps taken (where possible) to preserve those
effects (See also this thread [1] for discussion on that):
[1] https://lists.gnu.org/archive/html/bug-automake/2012-03/msg00048.html
1. The foreign strictness is implied.
Already present in AM_INIT_AUTOMAKE in newlib/acinclude.m4
2. The options no-installinfo, no-dependencies and no-dist are implied.
Already present in AM_INIT_AUTOMAKE in newlib/acinclude.m4
Future work: Remove no-dependencies and any explicit header dependencies,
and use automatic dependency tracking instead. Are there explicit rules
which are now redundant to removing no-installinfo and no-dist?
3. The macro AM_MAINTAINER_MODE is required.
Already present in newlib/acinclude.m4
Note that maintainer-mode is still disabled by default.
4. Info files are always created in the build directory, and not in the
source directory.
This appears to be an error in the automake documentation describing
'--cygnus' [2]. newlib's info files are generated in the source
directory, and no special steps are needed to keep doing that.
[2] https://lists.gnu.org/archive/html/bug-automake/2012-04/msg00028.html
5. texinfo.tex is not required if a Texinfo source file is specified.
(The assumption is that the file will be supplied, but in a place that
automake cannot find.)
This effect is overriden by an explicit setting of the TEXINFO_TEX
variable (the directory part of which is fed into texi2X via the
TEXINPUTS environment variable).
6. Certain tools will be searched for in the build tree as well as in the
user's PATH. These tools are runtest, expect, makeinfo and texi2dvi.
For obscure automake reasons, this effect of '--cygnus' is not active
for makeinfo in newlib's configury.
However, there appears to be top-level configury which selects in-tree
runtest, expect and makeinfo, if present. So, if that works as it
appears, this effect is preserved. If not, this may cause problem if
anyone is building those tools in-tree.
This effect is not preserved for texi2dvi. This may cause problems if
anyone is building texinfo in-tree.
If needed, explicit checks for those tools looking in places relative to
$(top_srcdir)/../ as well as in PATH could be added.
7. The check target doesn't depend on all.
This effect is not preseved. The check target now depends on the all
target.
This concern seems somewhat academic given the current state of the
testsuite.
Also note that this doesn't touch libgloss.
Add all the effects of 'cygnus' for which there exists an explicit way
to request that behaviour:
* Implied foreign strictness and options no-installinfo, no-dependencies
and no-dist are added to AM_INIT_AUTOMAKE in newlib/acinclude.m4.
* macro AM_MAINTAINER_MODE is added to newlib/acinclude.m4.
* For the implied TEXINFO_TEX of '$(top_srcdir)/../texinfo/texinfo.tex',
an explicit TEXINFO_TEX is always relative to $(srcdir), so write the
same pathname in that form.
This is to prepare for the removal of the automake option '--cygnus'.
Use AM_SILENT_RULES, to enable automake silent rules (by default), if we
are using a version of automake which supports it (>=1.11).
Silent rules can be disabled by configuring with '--disable-silent-rules',
or invoking 'make V=1'.
For ease of reviewing, this patch doesn't contain configure and
Makefile.in regeneration.
Future work: There are a few compilations which are not silenced by
this, as they use custom rules.
- This patch uses gdtoa imported from OpenBSD if newlib configure
option "--enable-newlib-use-gdtoa=no" is NOT specified. gdtoa
provides more accurate output and faster conversion than legacy
ldtoa, while it requires more heap memory.
- Currently, frexpl() supports only the following cases.
1) LDBL_MANT_DIG == 64 or 113
2) 'long double' is equivalent to 'double'
This patch add support for LDBL_MANT_DIG == 53.
This patch fixed a problem which isn't in newlib, but in projects
incorrectly using symbols from the reserved namespace.
This reverts commit 3ba1bd0d9d.
The code accessing the floating point control/status register, namely
#define __cfc1(__fcsr) __asm __volatile("cfc1 %0, $31" : "=r" (__fcsr)
does not compile with mips16. This changed the makefile to pass -mno-mips16 to avoid the following
compiler error:
mips-mti-elf fails with "Error: unrecognized opcode `cfc1 $3,$31'"
- Currently, printf("%La\n", 1e1000L) crashes with segv due to lack
of frexpl() function. With this patch, frexpl() function has been
implemented in libm to solve this issue.
Addresses: https://sourceware.org/pipermail/newlib/2021/018718.html
- If the number has large integer part and small fraction part is
specified in output format, e.g. printf("%.3f", sqrt(2)*1e60);,
valid output digits were insufficient. This patch fixes the issue.
https://cygwin.com/pipermail/cygwin/2021-November/249930.html
reported a regression introduce by using a dynamically sized local
char array in favor of a statically sized array.
Fix this by reverting to a statically sized array, using a small
buffer on the stack for a reasonable number of requested digits, a
big mallocated buffer otherwise. This should work for small targets
as well, given that malloc is used in printf anyway right now.
This is *still* hopefully just a temporary measure, unless somebody
actually provides a new ldtoa.
Fixes: 4d90e53359 ("ldtoa: fix dropping too many digits from output")
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Use the same name as glibc & gnulib to indicate "newlib itself is
being compiled". This also harmonizes the codebase a bit in that
_LIBC was already used in places instead of _COMPILING_NEWLIB.
Building for bfin-elf, mips-elf, and x86_64-pc-cygwin produces
the same object code.
Some distros enable _FORTIFY_SOURCE by default which upsets building
newlib which itself implements the logic for this define. For example,
building gets.c fails because the includes set up a gets() macro which
expands in the definition.
Since newlib isn't prepared to build itself with _FORTIFY_SOURCE, and
it's not clear if it's even useful, ignore it when building the code.
This also matches what glibc is doing.
The _COMPILING_NEWLIB symbol is for declaring "the code is being
compiled for newlib itself" so headers can change behavior vs the
header being used by users (who should get the normal clean API).
Unfortunately, this symbol is defined inconsistently leading to it
only being useful for a few subsections of the tree.
Pull it out so that it's defined all the time for all targets.
We're seeing a build failure in GNU sim code which is using _P locally
but the ctype.h define clashes with it. Rename these to use the same
symbols that glibc does. They're a bit more verbose, but seems likely
that we'll have fewer conflicts if glibc isn't seeing them.
However, these shortnames are still used internally by ctype modules
to produce pretty concise source code, so move the short names to the
internal ctype_.h where short name conflicts shouldn't show up.
This code looks like it's written to be copied & pasted between diff
C libraries and relies on _LIBC only being used with glibc. This will
break when newlib changes from _COMPILING_NEWLIB to _LIBC, so delete
the glibc-specific logic ahead of time.
ldtoa cuts the number of digits it returns based on a computation of
number of supported bits (144) divide by log10(2). Not only is the
integer approximation of log10(2) ~= 8/27 missing a digit here, it
also fails to take really small double and long double values into
account.
Allow for the full potential precision of long double values. At the
same time, change the local string array allocation to request only as
much bytes as necessary to support the caller-requested number of
digits, to keep the stack size low on small targets.
In the long run a better fix would be to switch to gdtoa, as the BSD
variants, as well as Mingw64 do.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Currently, newlib does not declare strsignal if DEFS_H is defined,
ostensibly to work around a gdb bug. However, gdb itself compiles
even with this ifndef removed, and this makes sim (another part of
gdb) fail to compile.
Since it is not clear exactly what issue this was working around,
this patch just replaces that ifdef with the correct check,
i.e. __POSIX_VISIBLE >= 200809.
Reported by prodisDown:
In picolibc/newlib/libc/string/strrchr.c
if (i) { while ((s=strchr(s, i))) { last = s; s++; } } else { last = strchr(s, i); }
Value (for example 0xFFFFFF00) in if (i) can pass test and
then be typecasted to char inside strchr(). Then s++ and then
buffer overrun.
It can be fixed by preventive typecast i = (int) (char) i; or
typecasting inside expression if ((char) i).
Fixed by casting to char.
Signed-off-by: Keith Packard <keithp@keithp.com>
Add specialized rotations RB_RED_ROTATE_LEFT() and RB_RED_ROTATE_RIGHT() which
may be used if we rotate a red child which has a black sibling. Such a red
node must have at least two child nodes so that the following red-black tree
invariant is fulfilled:
Every path from a given node to any of its descendant NULL nodes goes through
the same number of black nodes.
PARENT
/ \
BLACK RED
/ \
BLACK BLACK
Add specialized rotations RB_PARENT_ROTATE_LEFT() and RB_PARENT_ROTATE_RIGHT()
which may be used if the parent node exists and the direction of the child is
known. The specialized rotations are derived from RB_ROTATE_LEFT() and
RB_ROTATE_RIGHT() where the RB_SWAP_CHILD() was replaced by a simple
assignment.
In RB_GENERATE_REMOVE_COLOR() simplify a chain of conditions of the following
pattern
if (x) {
...
} else if (!x) {
...
}
to
if (x) {
...
} else {
...
}
We have
#define RB_ISRED(elm, field) \
((elm) != NULL && RB_COLOR(elm, field) == RB_RED)
So, the RB_ISRED() contains an implicit check for NULL. In
RB_GENERATE_REMOVE_COLOR() the "elm" pointer cannot be NULL in the while
condition. Use RB_COLOR(elm) == RB_BLACK instead.
There are a few files that are tied to the GNU simulator, so add myself
to match the general sim project.
Also add myself to the general write-after-approval since I've been doing
that for a long time now anyways :).
When newlib is configured with --enable-newlib-reent-check-verify,
the assert macro is already defined in the nano-mallocr.c compile unit.
Contributed by STMicroelectronics
Signed-off-by: Torbjörn SVENSSON <torbjorn.svensson@st.com>
libm/machine/i386/f_ldexp.S:30: Warning: no instruction mnemonic suffix given and no register operands; using default for `fild'
libm/machine/i386/f_ldexpf.S:30: Warning: no instruction mnemonic suffix given and no register operands; using default for `fild'
fix this by adding the l mnemonic suffix
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
unused function warning for two_way_short_needle,
different char type warnings for standard string functions
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
_STDIO_WITH_THREAD_CANCELLATION_SUPPORT was never defined.
Include ../stdio/local.h to get the right definition per target.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
__STDINT_EXP() is provided by newlib but not by stdint-gcc.h. stdint-gcc.h
is used when the GCC argument -ffreestanding is used and this results in this
file not compiling.
This patch to the libc/machine/nvptx port of newlib implements an
approximation of "clock" and provides some additional stub routines.
These changes not only reduce the number of (link) failures in the GCC
testsuite when targeting nvptx-none, but also allow the NIST scimark4
benchmark to compile and run without modification.
newlib already contains support for backends to provide their own
clock implementations via -DCLOCK_PROVIDED. That functionality is
used here to return an approximate elapsed time based on the NVidia
GPU's clock64 cycle counter. Although not great, this is better than
the current behaviour of link error from the unresolved symbol
_times_r.
The other part of the patch is to add a small number of stub functions
to nvptx's misc.c. Adding isatty, for example, resolves linking
problems in libc from the dependency in __smakebuf_r, and the sync
stub, for example, fixes the failure with GCC's
testsuite/gfortran.dg/ISO_Fortran_binding_14.f90 [which simply tests
that gfortran can call a/any C function].
newlib/
configure.host: Add -DCLOCK_PROVIDED to newlib_cflags on nvptx*.
newlib/libc/machine/nvptx
Makefile.am: Add clock.c to lib_a_SOURCES.
clock.c: New source file to implement/approximate clock().
misc.c: Add stubs for fstat, isatty, open, sync and unlink.
_strtod_l as well as the gethex function both fetch the decimal point
from the current LC_NUMERIC locale info. This pulls in _C_numeric_locale
unconditionally even on targets not supporting locales at all.
Another problem is that strtod.c and gdtoa-gethex.c are ELIX 1, while
locale information in general isn't. This leads to potential build
breakage on bare metal targets.
Fix this by setting the decimal point to "." on all targets not
defining __HAVE_LOCALE_INFO__.
While at it, const'ify the entire local decimal point info in the
affected functions.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
svfwscanf replaces getwc and ungetwc_r. The comments in the code talk
about avoiding file operations, but they also need to bypass the
mbtowc calls as svfwscanf operates on wchar_t, not multibyte data,
which is a more important reason here; they would not work correctly
otherwise.
The ungetwc replacement has code which uses the 3 byte FILE _ubuf
field, but if wchar_t is 32-bits, this field is not large enough to
hold even one wchar_t value. Building in this mode generates warnings
about array overflow:
In file included from ../../newlib/libc/stdio/svfiwscanf.c:35:
../../newlib/libc/stdio/vfwscanf.c: In function '_sungetwc_r.isra':
../../newlib/libc/stdio/vfwscanf.c:316:12: warning: array subscript 4294967295 is above array bounds of 'unsigned char[3]' [-Warray-bounds]
316 | fp->_p = &fp->_ubuf[sizeof (fp->_ubuf) - sizeof (wchar_t)];
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from ../../newlib/libc/stdio/stdio.h:46,
from ../../newlib/libc/stdio/vfwscanf.c:82,
from ../../newlib/libc/stdio/svfiwscanf.c:35:
../../newlib/libc/include/sys/reent.h:216:17: note: while referencing '_ubuf'
216 | unsigned char _ubuf[3]; /* guarantee an ungetc() buffer */
| ^~~~~
However, the vfwscanf code *never* ungets data before the start of the
scanning operation, and *always* ungets data which matches the input
at that point, so the code always hits the block which backs up over
the input data and never hits the block which uses the _ubuf field.
In addition, the svfwscanf code will always start with the unget
buffer empty, so the ungetwc replacement never needs to support an
unget buffer at all.
Simplify the code by removing support for everything other than
backing up over the input data, leaving the check to make sure it
doesn't get underflowed in case the vfscanf code has a bug in it.
Signed-off-by: Keith Packard <keithp@keithp.com>
Added function prototypes to newlib/libc/include/pthread.h
for the following Issue 8 Standard APIs:
pthread_cond_clockwait()
pthread_mutex_clocklock()
pthread_rwlock_clockrdlock()
pthread_rwlock_clockwrlock()
A recent patch introduced new code for sig2str/str2sig.
This code does not properly exclude code that requires
SIGRTMIN/SIGRTMAX to be defined and triggers the following
compile error:
newlib/libc/signal/sig2str.c:199:8: error: 'SIGRTMIN' undeclared
newlib/libc/signal/sig2str.c:200:29: error: 'SIGRTMAX' undeclared
Let's add the missing guards.
Fixes: 2b50ec0cd2 ("libc: Fix compilation for new sig2str/str2sig implementation")
Signed-off-by: Christoph Muellner <cmuellner@gcc.gnu.org>
Added implementations for sig2str() and str2sig() in libc/signal
in order to improve POSIX compliance. Added fucntion prototypes
in libc/include/sys/signal.h.
riscv64-unknown-elf-g++-11.1.0 regression suite reports the following
failures for
$ make check-gcc-c++ RUNTESTFLAGS='dg.exp=Wstringop-overflow-6.C'
```
FAIL: g++.dg/warn/Wstringop-overflow-6.C -std=gnu++14 (test for excess errors)
FAIL: g++.dg/warn/Wstringop-overflow-6.C -std=gnu++17 (test for excess errors)
FAIL: g++.dg/warn/Wstringop-overflow-6.C -std=gnu++2a (test for excess errors)
UNSUPPORTED: g++.dg/warn/Wstringop-overflow-6.C -std=gnu++98
```
The "excess errors" being
```
output is In file included from /home/maxim/prj/riscv-upstream/install/riscv64-unknown-elf/include/wchar.h:6,
from /home/maxim/prj/riscv-upstream/build/gcc-stage2/riscv64-unknown-elf/libstdc++-v3/include/cwchar:44,
from /home/maxim/prj/riscv-upstream/build/gcc-stage2/riscv64-unknown-elf/libstdc++-v3/include/bits/postypes.h:40,
from /home/maxim/prj/riscv-upstream/build/gcc-stage2/riscv64-unknown-elf/libstdc++-v3/include/iosfwd:40,
from /home/maxim/prj/riscv-upstream/build/gcc-stage2/riscv64-unknown-elf/libstdc++-v3/include/ios:38,
from /home/maxim/prj/riscv-upstream/build/gcc-stage2/riscv64-unknown-elf/libstdc++-v3/include/ostream:38,
from /home/maxim/prj/riscv-upstream/build/gcc-stage2/riscv64-unknown-elf/libstdc++-v3/include/iostream:39,
from /home/maxim/prj/riscv-upstream/gcc-11.1.0/gcc/testsuite/g++.dg/warn/Wstringop-overflow-6.C:6:
/home/maxim/prj/riscv-upstream/install/riscv64-unknown-elf/include/sys/reent.h:685:11: warning: unnecessary parentheses in declaration of '_sig_func' [-Wparentheses]
```
cc Aldy Hernandez <aldyh@redhat.com> and Andrew MacLeod <amacleod@redhat.com>,
they are author of new VRP analysis for GCC, just to make sure I didn't
mis-understanding or mis-interpreting anything on GCC site.
GCC 11 have better value range analysis, that give GCC more confidence
to perform more aggressive optimization, but it cause scalbn/scalbnf get
wrong result.
Using scalbn to demostrate what happened on GCC 11, see comments with VRP
prefix:
```c
double scalbn (double x, int n)
{
/* VRP RESULT: n = [-INF, +INF] */
__int32_t k,hx,lx;
...
k = (hx&0x7ff00000)>>20;
/* VRP RESULT: k = [0, 2047] */
if (k==0) {
/* VRP RESULT: k = 0 */
...
k = ((hx&0x7ff00000)>>20) - 54;
if (n< -50000) return tiny*x; /*underflow*/
/* VRP RESULT: k = -54 */
}
/* VRP RESULT: k = [-54, 2047] */
if (k==0x7ff) return x+x; /* NaN or Inf */
/* VRP RESULT: k = [-54, 2046] */
k = k+n;
if (k > 0x7fe) return huge*copysign(huge,x); /* overflow */
/* VRP RESULT: k = [-INF, 2046] */
/* VRP RESULT: n = [-INF, 2100],
because k + n <= 0x7fe is false, so:
1. -INF < [-54, 2046] + n <= 0x7fe(2046) < INF
2. -INF < [-54, 2046] + n <= 2046 < INF
3. -INF < n <= 2046 - [-54, 2046] < INF
4. -INF < n <= [0, 2100] < INF
5. n = [-INF, 2100] */
if (k > 0) /* normal result */
{SET_HIGH_WORD(x,(hx&0x800fffff)|(k<<20)); return x;}
if (k <= -54) {
/* VRP OPT: Evaluate n > 50000 as true...*/
if (n > 50000) /* in case integer overflow in n+k */
return huge*copysign(huge,x); /*overflow*/
else return tiny*copysign(tiny,x); /*underflow*/
}
k += 54; /* subnormal result */
SET_HIGH_WORD(x,(hx&0x800fffff)|(k<<20));
return x*twom54;
}
```
However give the input n = INT32_MAX, k = k+n will overflow, and then we
expect got `huge*copysign(huge,x)`, but new VRP optimization think
`n > 50000` is never be true, so optimize that into `tiny*copysign(tiny,x)`.
so the solution here is to moving the overflow handle logic before `k = k + n`.
- GCC will set __FLT_EVAL_METHOD__ to 16 if __fp16 supported, e.g.
cortex-a55/aarch64.
- $ aarch64-unknown-elf-gcc -v 2>&1 |grep version
gcc version 9.2.0 (GCC)
- $ aarch64-unknown-elf-gcc -E -dM -mcpu=cortex-a55 - < /dev/null |grep FLT_EVAL_METHOD
#define __FLT_EVAL_METHOD__ 16
#define __FLT_EVAL_METHOD_TS_18661_3__ 16
#define __FLT_EVAL_METHOD_C99__ 16
- The behavior of __FLT_EVAL_METHOD__ == 16 is same as
__FLT_EVAL_METHOD__ == 0 except for float16_t, but newlib didn't
support float16_t.
ISO/IEC TS 18661-3:
http://www.open-std.org/jtc1/sc22/wg14/www/docs/n2405.pdf
V2 Changes:
- List Howland, Craig D as co-author since he provide the draft of comment
in math.h.
Co-authored-by: "Howland, Craig D" <howland@LGSInnovations.com>
The C standard says that errno may acquire the value ERANGE if the
result from strtod underflows. According to IEEE 754, underflow occurs
whenever the value cannot be represented in normalized form.
Newlib is inconsistent in this, setting errno to ERANGE only if the
value underflows to zero, but not for denorm values, and never for hex
format floats.
This patch attempts to consistently set errno to ERANGE for all
'underflow' conditions, which is to say all values which are not
exactly zero and which cannot be represented in normalized form.
This matches glibc behavior, as well as the Linux, Mac OS X, OpenBSD,
FreeBSD and SunOS strtod man pages.
Signed-off-by: Keith Packard <keithp@keithp.com>
The scanf code was skipping the '0' after the 'x' causing the
resulting buffer to contain an invalid number when passed to strtod.
Signed-off-by: Keith Packard <keithp@keithp.com>
- compiler is sometimes optimizing out the rounding check in
e_sqrt.c and ef_sqrt.c which uses two constants to create
an inexact operation
- there is a similar constant operation in s_tanh.c/sf_tanh.c
- make the one and tiny constants volatile to stop this
Newlib for aarch64 uses libgloss for the backend. One common libgloss
implementation is the 'rdimon' implementation, which uses the Arm
Semihosting protocol. In order to support a remote host that runs on
Windows we need to know whether a file is to be opened in binary or
text mode. That means that we need to preserve this information via
O_BINARY until we know what the libgloss binding will be.
This patch simply copies the arm implementation from sys/arm/sys and
puts it in machine/aarch64/sys, because we don't have a 'sys' subtree
on aarch64.
The only reason why it is tough for us to use nano malloc
is because of the small shortcoming where nano_malloc()
splits a bigger chunk from the free list into two pieces
while handing back the second one (the tail) to the user.
This is error prone and especially bad for smaller heaps,
where nano malloc is supposed to be superior. The normal
malloc doesn't have this issue and we need to use it even
though it costs us ~2k bytes compared to nano-malloc.
The problem arise especially after giving back _every_
malloced memory to the heap and then starting to exercise
the heap again by allocating something small. This small
item might split the whole heap in two equally big parts
depending on how the heap has been exercised before.
I have uploaded the smallest possible application
(only tested on ST and Nordic devices) to show the issue
while the real customer applications are far more complicated:
https://drive.google.com/file/d/1kfSC2KOm3Os3mI7EBd-U0j63qVs8xMbt/view?usp=sharing
The application works like the following pseudo code,
where we assume a heap of 100 bytes
(I haven't taken padding and other nitty and gritty
details into account. Everything to simplify understanding):
void *ptr = malloc(52); // We get 52 bytes and we have
// 48 bytes to use.
free(ptr); // Hand back the 52 bytes to nano_malloc
// This is the magic line that shows the issue of
// nano_malloc
ptr = malloc(1); // Nano malloc will split the 52 bytes
// in the free list and hand you a pointer
// somewhere in the
// middle of the heap.
ptr2 = malloc(52); // Out of memory...
I have done a fix which hands back the first part of the
splitted chunk. Once this is fixed we obviously
have the 1 byte placed in position 0 of the heap instead
of somewhere in the middle.
However, this won't let us malloc 52 new bytes even though
we potentially have 99 bytes left to use in the heap. The
reason is that when we try to do the allocation,
nano-malloc looks into the free list and sees a 51 byte
chunk to be used.
This is not big enough so nano-malloc decides to call
sbrk for _another_ 52 bytes which is not possible since
there is only 48 bytes left to ask for.
The solution for this problem is to check if the last
item in the free list is adjacent to sbrk(0). If it is,
as it is in this case, we can just ask sbrk for the
remainder of what is needed. In this case 1 byte.
NB! I have only tested the solution on our ST device.
Use the more official fesetenv(FE_DFL_ENV) from _dll_crt0, thus
allowing to drop the _feinitialise declaration from fenv.h.
Provide a no-op _feinitialise in Cygwin as exportable symbol for really
old applications when _feinitialise was called from mainCRTStartup in
crt0.o.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Drop the Cygwin-specific fenv.cc and fenv.h file and use the equivalent
newlib functionality now, so we have at least one example of a user for
this new mechanism.
fenv.c: allow _feinitialise to be called from Cygwin startup code
fenv.h: add declarations for fegetprec and fesetprec for Cygwin only.
Fix a comment.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Add a directory libc/machine/shared_x86 to share header files
between ix86 and x86_64 architectures.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
So far the build mechanism in newlib only allowed to either define
machine-specific headers, or headers shared between all machines.
In some cases, architectures are sufficiently alike to share header
files between them, but not with other architectures. A good example
is ix86 vs. x86_64, which share certain traits with each other, but
not with other architectures.
Introduce a new configure variable called "shared_machine_dir". This
dir can then be used for headers shared between architectures.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Without this, for a bare-iron/simulator target such as cris-elf,
you'll see, at newlib build time:
/x/gccobj/./gcc/xgcc -B/x/gccobj/./gcc/ <many options elided> -c -o lib_a-aligned_alloc.o \
`test -f 'aligned_alloc.c' || echo '/y/newlib/libc/stdlib/'`aligned_alloc.c
/y/newlib/libc/stdlib/aligned_alloc.c: In function 'aligned_alloc':
/y/newlib/libc/stdlib/aligned_alloc.c:35:10: warning: implicit declaration of function \
'_memalign_r' [-Wimplicit-function-declaration]
35 | return _memalign_r (_REENT, align, size);
| ^~~~~~~~~~~
The revert-part of the revert-and-fix commit, b99887c428 a.k.a.
"Revert previous change to sys/stat.h and fix cris libgloss",
apparently intending to revert f75aa67851 a.k.a. "Fix regression in
cris-elf caused by sys/stat.h change" and fix it in another way,
wasn't complete. Although the fix-part added the prerequisite "#undef
st_atime" (et al) to gensyscalls, the revert-part didn't revert the
"&& !defined(__cris__)" in sys/stat.h, stopping st_atime (et al) from
being defined.
The effect of the unreverted change is that accessing the struct stat
compatibility member names "st_atime" (et al) as in "struct stat
mystat; mystat.st_atime;" yields errors, observable for example when
building libgfortran in gcc:
/x/gcc/libgfortran/intrinsics/stat.c:114:42: error: 'struct stat' has \
no member named 'st_atime'; did you mean 'st_atim'?
114 | sarray->base_addr[8 * stride] = sb.st_atime;
| ^~~~~~~~
| st_atim
(etc.)
Trivially fixed by completing the reversion, removing the "&&
!defined(__cris__)" in sys/stat.h.
Beware: the net effect of the earlier related change to struct stat in
sys/stat.h, leading up to the fix, *does* change its definition as a
type. Thankfully, replacing members like "time_t st_atime; long
st_spare1;" by "struct timespec st_atim;", ditto st_mtim and st_ctim,
is layout-compatible. To wit, that change is "binary compatible".
Incidentally, related to the simulator / Linux ABI, there's a
transitional stage (see gensyscalls), reloading between "struct stat"
(sys/stat.h) and "struct new_stat" (kernel/simulator) as necessary.
Tested by a cris-elf gcc build (including libgfortran).
This Patch removes Soft Float code from MIPS.
Instead It adds the soft float code from RISCV
The code came from FreeBSD and assumes the FreeBSD softfp
implementation not the one with GCC. That was an overlooked and
fixed in the other fenv code already.
Signed-off-by: Eshan Dhawan <eshandhawan51@gmail.com>
Change the prototypes to be in line with POSIX/glibc. This may fix
issues with new warnings produced by GCC 11.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Add the POSIX header file <poll.h> which is used by the GCC 11 Ada
runtime support.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
The Cortex-R52 processor is an Armv8-R processor with a NEON unit. This
fix prevents conflicting architecture profiles A/R errors issued by the
linker.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
This patch fixes the error found by Paul Zimmermann (see
https://homepages.loria.fr/PZimmermann/papers/#accuracy) regarding x
close to 1 and rather large y (specifically he found the case
powf(0x1.ffffeep-1,-0x1.000002p+27) which returns +Inf instead of the
correct value). We found 2 more values for x which show the same faulty
behaviour, and all 3 are fixed with this patch. We have tested all
combinations for x in [+1.fffdfp-1, +1.00020p+0] and y in
[-1.000007p+27, -1.000002p+27] and [1.000002p+27,1.000007p+27].
The overflow check in mEMALIGn erroneously checks for INT_MAX,
albeit the input parameter is size_t. Fix this to check for
__SIZE_MAX__ instead. Also, it misses to check the req against
adding the alignment before calling mALLOc.
While at it, add out-of-bounds checks to pvALLOc, nano_memalign,
nano_valloc, and Cygwin's (unused) dlpvalloc.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
to rb parent pointers. Define RB_SWAP_CHILD to replace the child of a parent
with its twin, and use it in 4 places. Use RB_SET in rb_link_node to remove the
only linuxkpi reference to color, and then drop color- and parent-related
definitions that are defined and used only in rbtree.h.
This is intended to be entirely cosmetic, with no impact on program
behavior, and leave RB_PARENT and RB_SET_PARENT as the only ways to
read and write rb parent pointers.
Reviewed by: markj, kib
Tested by: pho
Differential Revision: https://reviews.freebsd.org/D25264
the sibling of the root of the too-short tree is black and at least one of the
children of that sibling is red, either one or two rotations finish the
rebalancing. In the case when both of the children are red, the current
implementation uses two rotations where only one is necessary. This change
removes that extra rotation, and in that case also removes a needless
black-to-red-to-black recoloring.
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D25335
without using their interfaces, making them break when the representation
changes. Revert changes that eliminated the color field from rb-trees, leaving
everything as it was before.
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D25250
a bit of DIAGNOSTIC code that depends on it.
Reported by: rpokala, mjguzik
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D25204
field. Set the least significant bit in the pointer to the node from its parent
to indicate that the node is red. Have the tree rotation macros leave the
old-parent/new-child node red and the new-parent/old-child node black.
This change makes RB_LEFT and RB_RIGHT no longer assignable, and
RB_COLOR no longer defined. Any code that modifies the tree or
examines a node color would have to be modified after this change.
Reviewed by: markj
Tested by: pho
Differential Revision: https://reviews.freebsd.org/D25105
where the pointer checked is provably never null. Restructure the surrounding
code just enough to make the non-nullness obvious.
Reviewed by: markj
Tested by: pho
Differential Revision: https://reviews.freebsd.org/D25089
child is red or child is null. In the first case, RB_REMOVE_COLOR just changes
the child to black and returns. With this change, RB_REMOVE handles that case,
and drops the child argument to RB_REMOVE_COLOR, since that value is always
null.
RB_REMOVE_COLOR is changed to remove a couple of unneeded tests, and
to eliminate some deep indentation.
RB_ISRED is defined to combine a null check with a test for redness,
to replace that combination in several places.
Reviewed by: markj
Tested by: pho
Differential Revision: https://reviews.freebsd.org/D25032
search to find the node to replace the one being removed, restructure to first
remove the replacement node and correct the parent pointers around it, and then
let the all-cases code at the end deal with the parent of the deleted node,
making it point to the replacement node. This removes one or two conditional
branches.
Reviewed by: markj
Tested by: pho
Differential Revision: https://reviews.freebsd.org/D24845
macros so that is invoked at the root of every subtree that changes in an
insert or delete, and only once, and ordered from the bottom of the tree to the
top. For intel_gas.c, the only user of RB_AUGMENT I can find, change the
augmenting routine so that it does not climb from entry to tree root on every
call, and remove a 'tree correcting' function that can be supplanted by proper
tree augmentation.
Reviewed by: kib
Tested by: pho
Differential Revision: https://reviews.freebsd.org/D23189
removing a node and reinserting it back with an updated key.
This is one of dependencies for the upcoming stats(3) code.
Reviewed by: cem
Obtained from: Netflix
MFC after: 2 weeks
Sponsored by: Klara Inc, Netflix
Differential Revision: https://reviews.freebsd.org/D21786
For configurations without x2APIC support (guests, older hardware), the global
LAPIC MMIO mapping will trigger false-positive KCSan reports as it will appear
that multiple CPUs are concurrently reading and writing the same address.
This isn't actually true, as the underlying physical access will be performed
on the local CPU's APIC. Additionally, because LAPIC access can happen during
event timer configuration, the resulting KCSan printf can produce a panic due
to attempted recursion on event timer resources.
Add a __nosanitizethread preprocessor define to prevent the compiler from
inserting TSan hooks, and apply it to the x86 LAPIC accessors.
PR: 249149
Reported by: gbe
Reviewed by: andrew, kib
Tested by: gbe
Differential Revision: https://reviews.freebsd.org/D26354
This is an unfortunate instance where the __has_attribute check does
not function usefully. Gcc does have the attribute, but for gcc it only
applies to functions, not variables, and trying to apply it to a
variable generates Wattribute. So far we only apply the attribute to
variables. Only enable the attribute for clang, for now.
Reviewed by: Anton Rang <rang at acm.org>
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D22875
The assumptions of linker_set don't play nicely with
AddressSanitizer. AddressSanitizer adds a 'redzone' of zeros around
globals (including those in named sections), whereas linker_set
assumes they are all packed consecutively like a pointer array. So:
let's annotate linker_set so that AddressSanitizer ignores it.
Submitted by: Matthew Bryan <matthew.bryan@isilon.com>
Reviewed by: kib, rang_acm.org
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D22239
The <sys/cdefs.h> and <stdatomic.h> headers already included support for
C11 atomics via intrinsincs in modern versions of GCC, but these versions
tried to "hide" atomic variables inside a wrapper structure. This wrapper
is not compatible with GCC's internal <stdatomic.h> header, so that if
GCC's <stdatomic.h> was used together with <sys/cdefs.h>, use of C11
atomics would fail to compile. Fix this by not hiding atomic variables
in a structure for modern versions of GCC. The headers already avoid
using a wrapper structure on clang.
Note that this wrapper was only used if C11 was not enabled (e.g.
via -std=c99), so this also fixes compile failures if a modern version
of GCC was used with -std=c11 but with FreeBSD's <stdatomic.h> instead
of GCC's <stdatomic.h> and this change fixes that case as well.
Reported by: Mark Millard
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D16585
As discussed in GCC bug 97088
(https://gcc.gnu.org/bugzilla/show_bug.cgi?id=97088), parameters in
prototypes of library functions should use reserved names, or no name
at all.
This patch moves the internal struct __tzrule_struct to its own
internal header sys/_tz_structs.h. This is included from newlib's
time code as well as from Cygwin's localtime wrapper.
Signed-off-by: Torbjörn SVENSSON <torbjorn.svensson@st.com>
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
As discussed in GCC bug 97088
(https://gcc.gnu.org/bugzilla/show_bug.cgi?id=97088), parameters in
prototypes of library functions should use reserved names, or no name
at all.
This patch removes the 'ptr' parameter name from
wint_t _getwchar_r (struct _reent *);
wint_t _getwchar_unlocked_r (struct _reent *);
to avoid possible clashes with user code in case someone uses
before including Newlib's wchar.h (or uses some other conflicting
definition)
Signed-off-by: Torbjörn SVENSSON <torbjorn.svensson@st.com>
As discussed in GCC bug 97088
(https://gcc.gnu.org/bugzilla/show_bug.cgi?id=97088), parameters in
prototypes of library functions should use reserved names, or no name
at all.
This patch removes the 'j' parameter name from
extern intmax_t imaxabs(intmax_t);
to avoid possible clashes with user code in case someone uses
before including Newlib's inttypes.h (or uses some other conflicting
definition)
Signed-off-by: Torbjörn SVENSSON <torbjorn.svensson@st.com>
As discussed in GCC bug 97088
(https://gcc.gnu.org/bugzilla/show_bug.cgi?id=97088), parameters in
prototypes of library functions should use reserved names, or no name
at all.
This patch removes the 'x' parameter name from
extern int __isinff (float);
extern int __isinfd (double);
extern int __isnanf (float);
extern int __isnand (double);
extern int __fpclassifyf (float);
extern int __fpclassifyd (double);
extern int __signbitf (float);
extern int __signbitd (double);
to avoid possible clashes with user code in case someone uses
before including Newlib's math.h (or uses some other conflicting
definition)
The current gamma, gamma_r, gammaf and gammaf_r functions return
|gamma(x)| instead of ln(|gamma(x)|) due to a change made back in 2002
to the __ieee754_gamma_r implementation. This patch fixes that, making
all of these functions map too their lgamma equivalents.
To fix the underlying bug, the __ieee754_gamma functions have been
changed to return gamma(x), removing the _r variants as those are no
longer necessary. Their names have been changed to __ieee754_tgamma to
avoid potential confusion from users.
Now that the __ieee754_tgamma functions return the correctly signed
value, the tgamma functions have been modified to use them.
libm.a now exposes the following gamma functions:
ln(|gamma(x)|):
__ieee754_lgamma_r
__ieee754_lgammaf_r
lgamma
lgamma_r
gamma
gamma_r
lgammaf
lgammaf_r
gammaf
gammaf_r
lgammal (on machines where long double is double)
gamma(x):
__ieee754_tgamma
__ieee754_tgammaf
tgamma
tgammaf
tgammal (on machines where long double is double)
Additional aliases for any of the above functions can be added if
necessary; in particular, I'm not sure if we need to include
__ieee754_gamma*_r functions (which would return ln(|(gamma(x)|).
Signed-off-by: Keith Packard <keithp@keithp.com>
----
v2:
Switch commit message to ASCII
For RISC-V targets without hardware FMA support, include the
common fma implementation to provide that API.
Signed-off-by: Keith Packard <keithp@keithp.com>
Like ARM, some RISC-V implementations have hardware sqrt. Support for
that can be detected at compile time, which the code did. However, the
filenames were incorrect so that both the risc-v specific and general
code were getting included in the resulting library.
Fix this by following the ARM model and #include'ing the general code
when the architecture-specific support is not available.
Signed-off-by: Keith Packard <keithp@keithp.com>
The MSP430 target supports both 16-bit and 20-bit size_t and intptr_t.
Some implicit casts in Newlib expect these types to be
"long", (a 32-bit type on MSP430) which causes warnings during
compilation such as:
"cast from pointer to integer of different size"
This is required to avoid colliding with files built from libm/common
that would end up with the same object name.
When libm.a was constructed from the individual sub-libraries, the
contents of the libm/common files would be replaced by that from
libm/machine/arm with the same name.
Signed-off-by: Keith Packard <keithp@keithp.com>
commit 588a5e1dde added a non-reentrant
call to nano_malloc which causes a build failure if INTERNAL_NEWLIB is
defined.
Here is a snippet of the error:
In file included from .../newlib/newlib/libc/stdlib/nano-mallocr.c:38:
.../newlib/newlib/libc/include/malloc.h:42:25: note: expected 'struct _reent *' but argument is of type 'ptrdiff_t' {aka 'int'}
42 | extern void *_malloc_r (struct _reent *, size_t);
| ^~~~~~~~~~~~~~~
.../newlib/newlib/libc/stdlib/nano-mallocr.c:67:22: error: too few arguments to function '_malloc_r'
67 | #define nano_malloc _malloc_r
| ^~~~~~~~~
.../newlib/newlib/libc/stdlib/nano-mallocr.c:456:11: note: in expansion of macro 'nano_malloc'
456 | mem = nano_malloc(bytes);
| ^~~~~~~~~~~
In file included from .../newlib/newlib/libc/stdlib/nano-mallocr.c:38:
.../newlib/newlib/libc/include/malloc.h:42:14: note: declared here
42 | extern void *_malloc_r (struct _reent *, size_t);
| ^~~~~~~~~
.../newlib/newlib/libc/stdlib/nano-mallocr.c:43: warning: "assert" redefined
43 | #define assert(x) ((void)0)
|
This patch adds a missing RCALL to the args when calling nano_malloc
from nano_calloc, so that if the call is reentrant, reent_ptr is passed
as the first argument.
The variable `bytes` (also added in 588a5e1d) has been changed from a
`ptrdiff_t` to `malloc_size_t` as it does not need to be signed. It is
used to store the product of two unsigned malloc_size_t variables and
then iff there was no overflow is it passed to malloc and memset which
both expect size_t which is unsigned.
Signed-off-by: Craig Blackmore <craig.blackmore@embecosm.com>
This built-in function (available in both gcc and clang) is more
efficient and generates shorter code than open-coding the test.
Signed-off-by: Keith Packard <keithp@keithp.com>
When HAVE_FAST_FMAF is set, use the vfma.f32 instruction, when
HAVE_FAST_FMA is set, use the vfma.f64 instruction.
Usually the compiler built-ins will already have inlined these
instructions, but provide these symbols for cases where that doesn't
work instead of falling back to the (inaccurate) common code versions.
Signed-off-by: Keith Packard <keithp@keithp.com>
Anything with fast FMA is assumed to have fast FMAF, along with
32-bit arms that advertise 32-bit FP support and __ARM_FEATURE_FMA
Signed-off-by: Keith Packard <keithp@keithp.com>
32-bit ARM processors with HW float (but not HW double) may define
__ARM_FEATURE_FMA, but that only means they have fast FMA for 32-bit
floats.
Signed-off-by: Keith Packard <keithp@keithp.com>
It was calling __math_uflow(0) instead of __math_uflowf(0), which
resulted in no exception being set on machines with exception support
for float but not double.
Signed-off-by: Keith Packard <keithp@keithp.com>
This removes the run-time configuration of errno support present in
portions of the math library and unifies all of the compile-time errno
configuration under a single parameter so that the whole library
is consistent.
The run-time support provided by _LIB_VERSION is no longer present in
the public API, although it is still used internally to disable errno
setting in some functions. Now that it is a constant, the compiler should
remove that code when errno is not supported.
This removes s_lib_ver.c as _LIB_VERSION is no longer variable.
Signed-off-by: Keith Packard <keithp@keithp.com>
The __ieee754 functions already return the right value in exception
cases, so don't modify those. Setting the library to _POSIX_/_IEEE_
mode now only affects whether errno is modified.
Signed-off-by: Keith Packard <keithp@keithp.com>
The y0, y1 and yn functions need separate conditions when x is zero as
that returns ERANGE instead of EDOM.
Also stop adjusting the return value from the __ieee754_y* functions
as that is already correct and we were just breaking it.
Signed-off-by: Keith Packard <keithp@keithp.com>
math_errhandling is specified to contain two bits of information:
1. MATH_ERRNO -- Set when the library sets errno
2. MATH_ERREXCEPT -- Set when math operations report exceptions
MATH_ERRNO should match whether the original math code is compiled in
_IEEE_LIBM mode and the new math code has WANT_ERRNO == 1.
MATH_ERREXCEPT should match whether the underlying hardware has
exception support. This patch adds configurations of this value for
RISC-V, ARM, Aarch64, x86 and x86_64 when using HW float.
Signed-off-by: Keith Packard <keithp@keithp.com>
_IEEE_LIBM is the configuration value which controls whether the
original libm functions modify errno. Use that in the new math code as
well so that the resulting library is internally consistent.
Signed-off-by: Keith Packard <keithp@keithp.com>
C compilers may fold const values at compile time, so expressions
which try to elicit underflow/overflow by performing simple
arithemetic on suitable values will not generate the required
exceptions.
Work around this by replacing code which does these arithmetic
operations with calls to the existing __math_xflow functions that are
designed to do this correctly.
Signed-off-by: Keith Packard <keithp@keithp.com>
----
v2:
libm/math: Pass sign to __math_xflow instead of muliplying result
Compiling
#include <sys/select.h>
void f(int X)
{
fd_set set;
FD_ZERO(&set);
FD_SET(X,&set);
FD_CLR(X+1,&set);
(void)FD_ISSET(X+2,&set);
}
results in plenty of gcc warnings when compiled with
-Wconversion -Wsign-conversion:
fds.c:7:2: warning: conversion to ‘long unsigned int’ from ‘int’ may
FD_SET(X,&set);
^~~~~~
[...]
The unsigned NFDBITS macro combined with the signed 1L constant
are causing lots of implicit signed/unsigned type conversions.
Fix this by updating the FD_* macro code to the latest from FreeBSD
and adding an (int) cast to _NFDBITS.
As a side-effect, this fixes the visibility of NFDBITS and
fds_bits (only if __BSD_VISIBLE).
This also eliminates the old, outdated fd_set workaround.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Newlib's posix_spawn has been taken from FreeBSD. The code relies on
BSD-specific behaviour of vfork, namely the fact that vfork blocks
the parent until the child exits or calls execve as well as the fact
that the child shares parent memory in non-COW mode.
This behaviour can't be emulated by Cygwin. Cygwin's vfork is
equivalent to fork. This is POSIX-compliant, but it's lacking BSD's
vfork ingrained synchronization of the parent to wait for the child
calling execve, or the chance to just write a variable and the parent
will see the result.
So this requires a Cygwin-specific solution. The core function of
posix_spawn, called do_posix_spawn is now implemented twice, once using
the BSD method, and once for Cygwin using Windows synchronization under
the hood waiting for the child to call execve and signalling errors
upstream. The Windows specifics are hidden inside Cygwin, so newlib
only calls internal Cygwin functions.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
ld: libm.a(lib_a-fesetenv.o): in function `fesetenv':
newlib/libm/machine/arm/fesetenv.c:38: undefined reference to `vmsr_fpscr'
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Use the already existing stub files if possible. These files are
necessary to override the stub implementation with the machine-specific
implementation through the build system.
Reviewed-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Signed-off-by: Eshan dhawan <eshandhawan51@gmail.com>
The previous fenv support for ARM used the soft-float implementation of
FreeBSD. Newlib uses the one from libgcc by default. They are not
compatible. Having an GCC incompatible soft-float fenv support in
Newlib makes no sense. A long-term solution could be to provide a
libgcc compatible soft-float support. This likely requires changes in
the GCC configuration. For now, provide a stub implementation for
soft-float multilibs similar to RISC-V.
Move implementation to one file and delete now unused files. Hide
implementation details. Remove function parameter names from header
file to avoid name conflicts.
Provide VFP support if __SOFTFP__ is not defined like glibc.
Reviewed-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Signed-off-by: Eshan dhawan <eshandhawan51@gmail.com>
This patch fixes a bug in RISC-V's memcpy implementation where an
integer wraparound occurs when src + size < 8 * sizeof(long), causing
the word-sized copy loop to be incorrectly entered.
Signed-off-by: Chih-Mao Chen <cmchen@andestech.com>
If __HAVE_LOCALE_INFO__ is not defined, then the locale in the
locale-specific ctype functions is ignored. In the previous
implementation this resulted in compiler warnings. For example:
int main()
{
locale_t locale;
locale = duplocale(uselocale((locale_t)0));
isspace_l('x', locale);
return 0;
}
gcc -Wall main.c
main.c: In function 'main':
main.c:6:11: warning: variable 'locale' set but not used [-Wunused-but-set-variable]
6 | locale_t locale;
| ^~~~~~
_ICONV_CONVERTER -> ICONV_FROM_ENCODING. It's not perfect, as the
library can support different from/to encodings now, but at least in
the default configurations the tests now work.
Signed-off-by: Keith Packard <keithp@keithp.com>
This caused the strnstr to walk off the end of the alias array and
fetch invalid data. Instead of attempting to update 'len', just
re-compute it based on the table end pointer that is already known.
Signed-off-by: Keith Packard <keithp@keithp.com>
The pointer value for the iconv alias data never changes, so get rid
of the pointer and make it an array instead.
Signed-off-by: Keith Packard <keithp@keithp.com>
Fix the code checking for character set loading failure so that
it checks the return value from the init function.
Signed-off-by: Keith Packard <keithp@keithp.com>
The original implementation had multiple issues:
- Only worked when posix_memalign was available (Linux, RTEMS).
- Violated C11 link namespace rules by calling posix_memalign.
- Failed to set errno on error.
These can be fixed by essentially using the same implementation
for aligned_alloc as for memalign, i.e. simply calling _memalign_r
(which is always available and a "more reserved name" although
technically still not in the reserved link namespace, at least
code written in c cannot define a colliding symbol, newlib has
plenty such namespace issues so this is fine).
It is not clear what the right policy is when MALLOC_PROVIDED is set,
currently that does not cover aligned_alloc so it is kept that way.
Tested on aarch64-none-elf
The IEEE spec for pow only has special case for x**0 and 1**y when x/y
are quiet NaN. For signaling NaN, the general case applies and these functions
should signal the invalid exception and return a quiet NaN.
Signed-off-by: Keith Packard <keithp@keithp.com>
These functions shared a pattern of re-converting the argument to bits
when returning +/-0. Skip that as the initial conversion still has the
sign bit.
Signed-off-by: Keith Packard <keithp@keithp.com>
Recent GCC appears to elide multiplication by 1, which causes snan
parameters to be returned unchanged through *iptr. Use the existing
conversion of snan to qnan to also set the correct result in *iptr
instead.
Signed-off-by: Keith Packard <keithp@keithp.com>
This fix comes from glibc, from files which originated from
the same place as the newlib files. Those files in glibc carry
the same license as the newlib files.
Bug 14155 is spurious underflow exceptions from Bessel functions for
large arguments. (The correct results for large x are roughly
constant * sin or cos (x + constant) / sqrt (x), so no underflow
exceptions should occur based on the final result.)
There are various places underflows may occur in the intermediate
calculations that cause the failures listed in that bug. This patch
fixes problems for the double version where underflows occur in
calculating the intermediate functions P and Q (in particular, x**-12
gets computed while calculating Q). Appropriate approximations are
used for P and Q for arguments at least 0x1p28 and above to avoid the
underflows.
For sufficiently large x - 0x1p129 and above - the code already has a
cut-off to avoid calculating P and Q at all, which means the
approximations -0.125 / x and 0.375 / x can't themselves cause
underflows calculating Q. This cut-off is heuristically reasonable
for the point beyond which Q can be neglected (based on expecting
around 0x1p-64 to be the least absolute value of sin or cos for large
arguments representable in double).
The float versions use a cut-off 0x1p17, which is less heuristically
justifiable but should still only affect values near zeroes of the
Bessel functions where these implementations are intrinsically
inaccurate anyway (bugs 14469-14472), and should serve to avoid
underflows (the float underflow for jn in bug 14155 probably comes
from the recurrence to compute jn). ldbl-96 uses 0x1p129, which may
not really be enough heuristically (0x1p143 or so might be safer - 143
= 64 + 79, number of mantissa bits plus total number of significant
bits in representation) but again should avoid underflows and only
affect values where the code is substantially inaccurate anyway.
ldbl-128 and ldbl-128ibm share a completely different implementation
with no such cut-off, which I propose to fix separately.
Signed-off-by: Keith Packard <keithp@keithp.com>
Add the missing mask for the decomposition of hi+lo which caused some
errors of 1-2 ULP.
This change is taken over from FreeBSD:
95436ce20d
Additionally I've removed some variable assignments which were never
read before being overwritten again in the next 2 lines.
This fix for k_tan.c is a copy from fdlibm version 5.3 (see also
http://www.netlib.org/fdlibm/readme), adjusted to use the macros
available in newlib (SET_LOW_WORD).
This fix reduces the ULP error of the value shown in the fdlibm readme
(tan(1.7765241907548024E+269)) to 0.45 (thereby reducing the error by
1).
This issue only happens for large numbers that get reduced by the range
reduction to a value smaller in magnitude than 2^-28, that is also
reduced an uneven number of times. This seems rather unlikely given that
one ULP is (much) larger than 2^-28 for the values that may cause an
issue. Although given the sheer number of values a double can
represent, it is still possible that there are more affected values,
finding them however will be quite hard, if not impossible.
We also took a look at how another library (libm in FreeBSD) handles the
issue: In FreeBSD the complete if branch which checks for values smaller
than 2^-28 (or rather 2^-27, another change done by FreeBSD) is moved
out of the kernel function and into the external function. This means
that the value that gets checked for this condition is the unreduced
value. Therefore the input value which caused a problem in the
fdlibm/newlib kernel tan will run through the full polynomial, including
the careful calculation of -1/(x+r). So the difference is really whether
r or y is used. r = y + p with p being the result of the polynomial with
1/3*x^3 being the largest (and magnitude defining) value. With x being
<2^-27 we therefore know that p is smaller than y (y has to be at least
the size of the value of x last mantissa bit divided by 2, which is at
least x*2^-51 for doubles) by enough to warrant saying that r ~ y. So
we can conclude that the general implementation of this special case is
the same, FreeBSD simply has a different philosophy on when to handle
especially small numbers.
Make line 47 in sf_trunc.c reachable. While converting the double
precision function trunc to the single precision version truncf an error
was introduced into the special case. This special case is meant to
catch both NaNs and infinities, however qNaNs and infinities work just
fine with the simple return of x (line 51). The only error occurs for
sNaNs where the same sNaN is returned and no invalid exception is
raised.
The comparison c == FP_INFINITE causes the function to return +inf as it
expects x = +inf to always be larger than y. This shortcut causes
several issues as it also returns +inf for the following cases:
- fdim(+inf, +inf), expected (as per C99): +0.0
- fdim(-inf, any non NaN), expected: +0.0
I don't see a reason to keep the comparison as all the infinity cases
return the correct result using just the ternary operation.
While testing the exp function we noticed some errors at the specified
magnitude. Within this range the exp function returns the input value +1
as an output. We chose to run a test of 1m exponentially spaced values
in the ranges [-2^-27,-2^-32] and [2^-32,2^-27] which showed 7603 and
3912 results with an error of >=0.5 ULP (compared with MPFR in 128 bit)
with the highest being 0.56 ULP and 0.53 ULP.
It's easy to fix by changing the magnitude at which the input value +1
is returned from <2^-28 to <2^-32 and using the polynomial instead. This
reduces the number of results with an error of >=0.5 ULP to 485 and 479
in above tests, all of which are exactly 0.5 ULP.
As we were already checking on exp we also took a look at expf. For expf
the magnitude where the input value +1 is returned can be increased from
<2^-28 to <2^-23 without accuracy loss for a slight performance
improvement. To ensure this was the correct value we tested all values
in the ranges [-2^-17,-2^-28] and [2^-28,2^-17] (~92.3m values each).
The single-precision trigonometric functions show rather high errors in
specific ranges starting at about 30000 radians. For example the sinf
procedure produces an error of 7626.55 ULP with the input
5.195880078125e+04 (0x474AF6CD) (compared with MPFR in 128bit
precision). For the test we used 100k values evenly spaced in the range
of [30k, 70k]. The issues are periodic at higher ranges.
This error was introduced when the double precision range reduction was
first converted to float. The shift by 8 bits always returns 0 as iq is
never higher than 255.
The fix reduces the error of the example above to 0.45 ULP, highest
error within the test set fell to 1.31 ULP, which is not perfect, but
still a significant improvement. Testing other previously erroneous
ranges no longer show particularly large accuracy errors.
Most code in newlib already uses unified syntax, but just a couple of
laggards remain. This patch removes these and means the the entire
code base has now been converted.
Having symlinks for these files led to an issue reported to the RTEMS
Project that showed up using some tar for native Windows to unpack the
newlib sources. It creates symlinks in the tar file as copies of the
files the symlinks point to. If the links appear in the tar file before
the source exists, it cannot copy the file.
The solution in this patch is to convert the files that are symbolic
links into simple files which include the file they were linked to.
This should be more portable and avoids the symbolinc link problem.
I think I may have encountered a bug in the implementation of pow:
pow(-1.0, NaN) returns 1.0 when it should return NaN.
Because ix is used to check input vs 1.0 rather than hx, -1.0 is
mistaken for 1.0
This edits licenses held by Berkeley and NetBSD, both of which
have removed the advertising requirement from their licenses.
Signed-off-by: Keith Packard <keithp@keithp.com>
This reverts commit 59362c80e3.
This breaks gnulib's autoconf test for POSIX compatibility of
fflush/fseek. After fflush/fseek, ftello and lseek are out of
sync, with lseek having the wrong offset. This breaks backward
compatibility with Cygwin applications.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- also change the handling of default_newlib_reent_check_verify to
be the same as other default variables in configure.host
- regenerate newlib/configure
If we had architecture-specific exception bits, we could just set them
to match the processor, but instead ieeefp.h is shared by all targets
so we need to map between the public values and the register contents.
Signed-off-by: Keith Packard <keithp@keithp.com>
This makes the fpsetround function actually do something rather than
just return -1 due to the default 'fall-through' behavior of the switch
statement.
Signed-off-by: Keith Packard <keithp@keithp.com>
In the two helper functions that _dcvt calls for 'f' and 'e' mode, if
there are no digits to display after the decimal point, don't add one.
Signed-off-by: Keith Packard <keithp@keithp.com>
Leading zeros after the decimal point should not count
towards the 'ndigits' limit.
This makes gcvt match glibc and the posix gcvt man page.
Signed-off-by: Keith Packard <keithp@keithp.com>
Even if the number is really small and this means showing *no* digits.
This makes newlib match glibc, and the fcvt posix man page.
Signed-off-by: Keith Packard <keithp@keithp.com>
sf_log1p was using __math_divzero and __math_invalid, which
drag in a pile of double-precision code. Switch to using the
single-precision variants. This also required making those
available in __OBSOLETE_MATH mode.
Signed-off-by: Keith Packard <keithp@keithp.com>
newlib wide char conversion functions were updated to
Unicode 11 on 2019-01-12
update standard symbol __STDC_ISO_10646__ to
Unicode 11 release date 2018-06-05 for Cygwin
The call to fflush was invalidating the read buffer, preventing relative
seeks to positions that would have been inside the read buffer from
being optimized. The call to srefill would then re-read mostly the same
data that was initially in the read buffer.
s[0:3] contain a descriptor used to set up the initial value of the
stack, but only the lower 48 bits of s[0:1] are currently used.
The reent marker is currently set in s3, but by stashing it in the
upper 16 bits of s[0:1] instead, s3 can be freed up for other purposes.
This change is based on the FreeBSD commit:
Author: asomers <asomers@FreeBSD.org>
Date: Mon Jul 30 15:46:40 2018 +0000
Make timespecadd(3) and friends public
The timespecadd(3) family of macros were imported from NetBSD back in
r35029. However, they were initially guarded by #ifdef _KERNEL. In the
meantime, we have grown at least 28 syscalls that use timespecs in some
way, leading many programs both inside and outside of the base system to
redefine those macros. It's better just to make the definitions public.
Our kernel currently defines two-argument versions of timespecadd and
timespecsub. NetBSD, OpenBSD, and FreeDesktop.org's libbsd, however, define
three-argument versions. Solaris also defines a three-argument version, but
only in its kernel. This revision changes our definition to match the
common three-argument version.
Bump _FreeBSD_version due to the breaking KPI change.
Discussed with: cem, jilles, ian, bde
Differential Revision: https://reviews.freebsd.org/D14725
Sebastian Huber
Matt Joyce
Jon Turney
Dimitar Dimitrov
Corinna Vinschen
Andrea Corallo
Jeff Johnston
jdoubleu
Mike Frysinger
Andrew Stubbs
Jeff Law
Andoni Arregi
Cyril Yared
Nick Alcock
Alexander von Gluck IV
H.J. Lu
Samuel Thibault
Keith Thompson
Guilherme Janczak
Takashi Yano
Thomas Wolff
Christian Biesinger via Newlib
Keith Packard
Joel Sherrill
Roger Sayle
Matt Joyce
Christoph Muellner
Maxim Blinov
Alex White
Kito Cheng
Jonathan Wakely
Richard Earnshaw
Ola Olsson
Ties Stuij
David Macek
Marcus Comstedt
Hans-Peter Nilsson
Eshan dhawan
Paul Zimmermann
Fabian Schriever
Corinna Vinschen
Ivan Grokhotov
dougm
trasz
jah
mjg
rlibby
dab
jhb
Torbjörn SVENSSON
Christophe Lyon
Jojo R
Jozef Lawrynowicz
Craig Blackmore
Aschref Ben Thabet
Szabolcs Nagy
Joseph S. Myers
Thomas Wolff
Nicolas Brunie
Anthony Green
Bruno Haible
Brian Inglis
Bastien Bouclet
Kwok Cheung Yeung