- Add 24 bit color support using xterm compatibility mode in
Windows 10 1703 or later.
- Add fake 24 bit color support for legacy console, which uses
the nearest color from 16 system colors.
Add static functions peek_fifo, thread_fifo, start_thread_fifo, and
fifo_cleanup to select.cc. These are based on the corresponding pipe
functions, the main difference being that peek_fifo loops through the
connected clients to see if any of them have data available for
reading.
Add the fhandler_fifo methods select_read, select_write, and
select_except.
Add accessor methods get_nclients, get_handle, and is_connected that
are needed by peek_fifo.
First cut of a timerfd implementation.
Still TODO:
- fork/exec semantics
- timerfd_settime TFD_TIMER_CANCEL_ON_SET flag
- ioctl(TFD_IOC_SET_TICKS)
- bug fixes
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Allow the signal thread to recognize we're called in consequence of
select on a signalfd. If the signal is part of the wait mask, don't
call any signal handler and don't remove the signal from the queue,
so a subsequent read (or sigwaitinfo/sigtimedwait) still gets the
signal. Instead, just signal the event object at
_cygtls::signalfd_select_wait for the thread running select.
The addition of signalfd_select_wait to _cygtls unearthed the alignment
problem of the context member again. To make sure this doesn't get lost,
improve the related comment in the header file so that this (hopefully)
doesn't get lost (again).
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
First cut of a signalfd implementation.
Still TODO: Non-polling select.
This should mostly work as on Linux except for missing support
for some members of struct signalfd_siginfo, namely ssi_fd,
ssi_band (both SIGIO/SIGPOLL, not fully implemented) and ssi_trapno
(HW exception, required HW support).
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
There's a long-standing bug in select. If we have poll-only
descriptors in the fd set, select overwrites the incoming
fd sets with the polling result. If none of the fds is ready,
select has to loop again. But now the fd sets are set to all
zero and select hangs.
Fix this by utilizing the local fd sets r, w, e as storage for
the incoming fd sets and use them to initialize select_stuff.
If we have to loop, overwritung the incoming fd sets doesn't matter.
While at it, rename r, w, e to readfds_in, writefds_in, exceptfds_in.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- Drop hires_[nm]s clocks, rename hires.h to clock.h.
- Implement clk_t class as an extensible clock class in new file clock.cc.
- Introduce get_clock(clock_id) returning a pointer to the clk_t instance
for clock_id. Provide the following methods along the lines of the former
hires classes:
void clk_t::nsecs (struct timespec *);
ULONGLONG clk_t::nsecs ();
LONGLONG clk_t::usecs ();
LONGLONG clk_t::msecs ();
void clk_t::resolution (struct timespec *);
- Add CLOCK_REALTIME_COARSE, CLOCK_MONOTONIC_RAW, CLOCK_MONOTONIC_COARSE
and CLOCK_BOOTTIME clocks.
- Allow clock_nanosleep, pthread_condattr_setclock and timer_create to use
all new clocks (both clocks should be usable with a small tweak, though).
- Bump DLL major version to 2.12.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
* Make distinct from AF_LOCAL for testing purposes. This will have
to be reverted as soon as fhandler_socket_unix goes life.
* Move saw_reuseaddr flag back to fhandler_socket status
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Insert another class fhandler_socket_wsock between fhandler_socket
and fhandler_socket_inet/fhandler_socket_local.
Also, add a new method fhandler::is_wsock_socket to allow asking
for sockets in general (is_socket) vs. Winsock-based sockets
(is_wsock_socket).
This allows to develop a new handler_socket_unix class as derived
class from fhandler_socket without any trace of wsock code left
in fhandler_socket.
While this is basically a temporary measure at this time, it may
prove useful for later interoperability with the upcoming Windows 10
AF_UNIX implementation at one point.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
* Redefine NSPERSEC to NS100PERSEC
* Define NSPERSEC as nanosecs per second
* Define USPERSEC as microsecs per second
* Use above constants throughout where appropriate
* Rename to_us to timespec_to_us and inline
* Rename it_bad to timespec_bad and inline
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
* Don't use a bool var to store three states (-1, 0, 1).
* Correctly check for NT_SUCCESS of a function returning NTSTATUS.
* Straighten out code for better readability.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
For historical reasons peek_console was calling the functions
PeekConsoleInputA and ReadConsoleInputA. However, these functions are
not working correctly under at least codepage 65001 (UTF-8) on systems
prior to Windows 10.
Use PeekConsoleInputW and ReadConsoleInputW instead, which work
correctly under all systems and all codepages.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Create two new inline functions is_alt_numpad_key(PINPUT_RECORD) and
is_alt_numpad_event(PINPUT_RECORD) which contain the actual checks.
Call these functions from fhandler_console::read and peek_console for
better readability.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
{p}select/{p}poll completely ignored Alt+Numpad key sequences in console
input which results in newer readline using pselect to fail handling such
sequences correctly. See https://cygwin.com/ml/cygwin/2017-01/msg00135.html
During debugging and testing it turned out that while reading console
input, single key presses during an Alt+Numpad sequences where not
ignored, so ultimately a sequence like
Alt-down Numpad-1 Numpad-2 Numpad-3
whihc is supposed to result in a single character in the input stream
will actually result in 4 chars in the input stream, three control
sequences and the actual character.
Both problems should be fixed by this patch.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
SIGTTIN should be raised when read() is made on a tty in a backgrounded
process, but not when it's tested with poll()/select().
I guess poll()/select() does need to call bg_check(), in order to detect the
error conditions that notices (that is, if bg_check() returns bg_eof or
bg_error, then fd is ready as an error condition exists) so add an optional
parameter to fhandler_base::bg_select() to indicate that signals aren't
desired.
See https://cygwin.com/ml/cygwin-developers/2016-07/msg00004.html
Bump GPLv2+ to GPLv3+ for some files, clarify BSD 2-clause.
Everything else stays under GPLv3+.
New Linking Exception exempts resulting executables from LGPLv3 section 4.
Add CONTRIBUTORS file to keep track of licensing.
Remove 'Copyright Red Hat Inc' comments.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Commit a23e6a35d8 introduced a timer
object to the WFMO handling in select_stuff::wait to allow sub-tickcount
timeout values in select.
Problems with this patch: The timer was created and destroyed on every
invocation of select_stuff::wait, thus potentially multiple times per
select. Also, since the timer was prepended to the WFMO hande list,
the timer handle could shadow actual events on other objects, given that
WFMO checks the objects in the order they have been specified in the
HANDLE array. The timer was also created/destroyed and added to the
HANDLE array even if it was not required.
This patch drops the local timer HANDLE and recycles the cw_timer HANDLE
in the cygtls area instead. Thus we typically don't need to create the
timer in select at all, and we never have to destroy it.
The timer HANDLE is now also appended as last object to the HANDLE array,
and it's only added if actually needed.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The check for current timestamp > start timestamp has an unwelcome
side effect: The loop is not left as long as the current timestamp
hasn't been incremented. This leads to busy loops of about one tick
(10 to 16 ms per MSDN).
This fixes https://cygwin.com/ml/cygwin/2016-05/msg00327.html
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
* select.h: Eliminate redundant select_stuff::select_loop state.
* select.cc (select): Eliminate redundant
select_stuff::select_loop state. Eliminate redundant code for
zero timeout. Do not return early on early timer return.
(select_stuff::wait): Eliminate redundant
select_stuff::select_loop state.
* select.h: Change prototype for select_stuff::wait() for larger
microsecond timeouts.
* select.cc (pselect): Convert from old cygwin_select().
Implement microsecond timeouts.
(cygwin_select): Rewrite as a wrapper on pselect().
(select): Implement microsecond timeouts.
(select_stuff::wait): Implement microsecond timeouts with a timer
object.
* cygwait.h (cygwait_us) Remove; this reverts previous changes.
* select.h: Eliminate redundant select_stuff::select_loop state.
* select.cc (select): Eliminate redundant
select_stuff::select_loop state. Eliminate redundant code for
zero timeout. Do not return early on early timer return.
(select_stuff::wait): Eliminate redundant
select_stuff::select_loop state.
* cygwait.h: Add cygwait_us() methods.
* select.h: Change prototype for select_stuff::wait() for larger
microsecond timeouts.
* select.cc (pselect): Convert from old cygwin_select().
Implement microsecond timeouts.
(cygwin_select): Rewrite as a wrapper on pselect().
(select): Implement microsecond timeouts.
(select_stuff::wait): Implement microsecond timeouts with a timer
object.
* fhandler.h (fhandler_console): Move get_nonascii_key() from
select.c into this class.
* select.cc (peek_console): Move get_nonascii_key() into
fhandler_console class.
Rename "res" to "wait_state" and change its type to
select_stuff::wait_states. Use select_stuff::wait_states
values instead of ints throughout. Rearrange a few comments.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
* select.cc (copyfd_set): Remove.
(select): Don't copy local wait fd arrays over to returned fd arrays
since bits set there are not accounted for in return value. Zero out
returned fd arrays instead. Always call sel.poll even in case of a
timeout. Always zero out fd array when timing out. Convert while/do
to do/while for clarity. Use dedicated variable as return value to
decouple return value from artificial return code from sel.wait.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
* cygtls.h (_cygtls::wait_signal_arrived): Renamed from
set_signal_arrived.
(_cygtls::set_signal_arrived): New function signalling signal_arrived.
(_cygtls::reset_signal_arrived): Don't reset will_wait_for_signal.
(_cygtls::unwait_signal_arrived): New function only resetting
will_wait_for_signal.
(class wait_signal_arrived): Rename from set_signal_arrived.
Accommodate name change throughout Cygwin.
(wait_signal_arrived::~wait_signal_arrived): Call
_cygtls::unwait_signal_arrived. Add comment.
* cygserver_ipc.h (ipc_set_proc_info): Fetch signal_arrived handle
via call to _cygtls::get_signal_arrived.
* exceptions.cc (_cygtls::interrupt_setup): Signal signal_arrived via
call to _cygtls::set_signal_arrived.
(_cygtls::handle_SIGCONT): Ditto.
* fhandler_socket.cc (fhandler_socket::wait_for_events): Generate
WSAEVENT array prior to entering wait loop. Add cancel event object
if available. Remove calls to pthread_testcancel and just call
pthread::static_cancel_self if the cancel event object is signalled.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
* fhandler.h (class fhandler_base): Add virtual function
get_io_handle_cyg() to get handle from which OPOST-processed output is
read on PTY master.
(class fhandler_pty_slave): Add variable output_handle_cyg to store a
handle to which OPOST-processed output is written. Add two functions,
i.e., set_output_handle_cyg() and get_output_handle_cyg(), regarding
variable output_handle_cyg. Now, output_handle is used only by native
windows program. The data before OPOST-processing is written to
output_handle and OPOST-processing is applied in the master-side. For a
cygwin process, OPOST-processing is applied in the slave-side, and the
data after OPOST-processing is written to output_handle_cyg.
(class fhandler_pty_master): Add two variables, i.e., io_handle_cyg and
to_master_cyg, to store handles of a pipe through which OPOST-processed
output passes. Add pty_master_fwd_thread and function
pty_master_fwd_thread() for a thread which applies OPOST-processing
and forwards data from io_handle to to_master_cyg. Add function
get_io_handle_cyg() regarding variable io_handle_cyg. Now, the pipe
between io_handle and to_master are used only by native windows program
for applying OPOST-processing in the master-side. For a cygwin process,
the pipe between io_handle_cyg and to_master_cyg is used for passing
through the data which is applied OPOST-processing in the slave-side.
* fhandler_tty.cc (struct pipe_reply): Add member to_master_cyg.
(fhandler_pty_master::process_slave_output): Read slave output from
io_handle_cyg rather than io_handle.
(fhandler_pty_slave::fhandler_pty_salve): Initialize output_handle_cyg.
(fhandler_pty_slave::open): Set output_handle_cyg by duplicating handle
to_master_cyg on PTY master.
(fhandler_pty_slave::close): Close handle output_handle_cyg.
(fhandler_pty_slave::write): Write data to output_handle_cyg rather
than output_handle.
(fhandler_pty_slave::fch_close_handles): Close handle output_handle_cyg.
(fhandler_pty_master::fhandler_pty_master): Initialize io_handle_cyg,
to_master_cyg and master_fwd_thread.
(fhandler_pty_master::cleanup): Clean up to_master_cyg as well.
(fhandler_pty_master::close): Print to_master_cyg as well in debug
message. Terminate master forwarding thread. Close handles
to_master_cyg and io_handle_cyg.
(fhandler_pty_master::ioctl): Use io_handle_cyg rather than to_master.
(fhandler_pty_master::pty_master_thread): Add code for duplicating
handle to_master_cyg.
(fhandler_pty_master::pty_master_fwd_thread): New function for a thread
to forward OPOST-processed data from io_handle to to_master_cyg. This
thread applies OPOST-processing to the output of native windows program.
(::pty_master_fwd_thread): Ditto.
(fhandler_pty_master::setup): Create a new pipe to pass thruegh OPOST-
processed output. Create new thread to forward data from io_handle to
to_master_cyg. Set handle to_master_cyg to tty. Print io_handle_cyg as
well in debug message. Close handles io_handle_cyg and to_master_cyg in
case of error.
(fhandler_pty_master::fixup_after_fork): Set handle to_master_cyg to
tty. Copy handle to_master_cyg from arch->to_master_cyg.
(fhandler_pty_master::fixup_after_exec): Clean up to_master_cyg.
* select.cc: Check handle returned by get_io_handle_cyg() rather than
get_handle().
* tty.h (class tty): Add variable _to_master_cyg to store a handle to
which OPOST-processed data is written. Add two functions,
to_master_cyg() and set_to_master_cyg(), regarding _to_master_cyg.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
* tty.h (class tty_min): Remove variable "write_error" to which any
errors are not currently set at anywhere.
(class tty): Add variable "column" for handling ONOCR.
* tty.cc (tty::init): Add initialization code for variable "column".
* fhandler.h (class fhandler_pty_master): Remove variable "need_nl"
which is not necessary any more. "need_nl" was needed by OPOST process
in fhandler_pty_master::process_slave_output().
(class fhandler_pty_common): Add function process_opost_output() for
handling post processing for OPOST in write process.
* fhandler_tty.cc (fhandler_pty_master::process_slave_output): Count
TIOCPKT control byte into length to be read in TIOCPKT mode. Move
post processing for OPOST to write process. Remove code related to
variable "write_error". Return with EIO error if slave is already
closed.
(fhandler_pty_master::fhandler_pty_master): Remove initialization
code for variable "need_nl".
(fhandler_pty_common::process_opost_output): Add this function for
handling of OPOST in write process. Add code to avoid blocking in
non-blocking mode when output is suspended by ^S.
(fhandler_pty_slave::write): Call fhandler_pty_common::
process_opost_output() instead of WriteFile(). Remove code related to
variable "write_error".
(fhandler_pty_master::doecho): Call fhandler_pty_common::
process_opost_output() instead of WriteFile().
* select.cc (peek_pipe): Remove code related to variable "need_nl".
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
(class fhandler_pty_master): Add echo_r and echo_w handles constituting
read and write side of new echo pipe.
* select.cc (peek_pipe): On pty masters, check additionally if input
from the echo pipe is available.
* fhandler_tty.cc (fhandler_pty_master::doecho): Drop output_mutex
locking. Write output to echo pipe.
(fhandler_pty_master::process_slave_output): Check if input is available
in echo pipe and prefer to read from it, if so.
(fhandler_pty_slave::write): Drop output_mutex locking.
(fhandler_pty_master::fhandler_pty_master): Initialize echo pipe
handles to NULL.
(fhandler_pty_master::close): Close and NULL echo pipe handles.
(fhandler_pty_master::setup): Create echo pipe, close in case of error.
connect_state and af_local_connect connect call here, once, independent
of FD_CONNECT being requested. Add comment to explain why.
(fhandler_socket::connect): Drop connect_state handling and calling
af_local_connect. Move remaining AF_LOCAL stuff prior to calling
::connect and explain why. Simplify error case.
* poll.cc (poll): Handle connect state independently of POLLOUT being
requested for the descriptor to allow setting POLLIN if connect failed.
Add comment.
* select.cc (set_bits): Drop connect_state and AF_LOCAL handling here.
handler.
* cygtls.cc (_cygtls::remove): Accommodate the fact that pathbufs
has been moved from _local_storage to _cygtls.
* cygtls.h (class tls_pathbuf): Add comment to hint to gendef usage
of counters. Change type of counters to uint32_t for clarity.
Remove _cygtls as friend class.
(struct _local_storage): Move pathbufs from here...
(struct _cygtls): ...to here, allowing to access it from _sigbe.
(class san): Only define on 32 bit. Remove errno, _c_cnt and _w_cnt
members.
(san::setup): Drop parameter. Don't initialize removed members.
(san::leave): Don't set removed members.
(class myfault): Only define on 32 bit.
(myfault::faulted): Only keep implementation not taking any parameter.
Drop argument in call to sebastian.setup.
(__try/__leave/__except/__endtry): Implement to support real SEH. For
now stick to SJLJ on 32 bit.
* dcrt0.cc (dll_crt0_0): Drop 64 bit call to
exception::install_myfault_handler.
* exception.h (exception_handler): Define with EXCEPTION_DISPOSITION
as return type.
(PDISPATCHER_CONTEXT): Define as void * on 32 bit. Define as pointer
to _DISPATCHER_CONTEXT on 64 bit.
(class exception): Define separately for 32 and 64 bit.
(exception::myfault): Add handler for myfault SEH handling on 64 bit.
(exception::exception): Fix mangled method name to account for change
in type of last parameter.
(exception::install_myfault_handler): Remove.
* exceptions.cc (exception::myfault_handle): Remove.
(exception::myfault): New SEH handler for 64 bit.
* gendef (_sigbe): Set tls_pathbuf counters to 0 explicitely when
returning to the caller.
* ntdll.h: Move a comment to a better place.
(struct _SCOPE_TABLE): Define on 64 bit.
* thread.cc (verifyable_object_isvalid): Remove gcc 4.7 workaround.
* tls_pbuf.cc (tls_pbuf): Fix to accommodate new place of pathbufs.
(tls_pathbuf::destroy): Change type of loop variables to uint32_t.
* tls_pbuf.h (class tmp_pathbuf): Change type of buffer counters to
uint32_t. Accommodate new place of pathbufs.
* tlsoffsets.h: Regenerate.
* tlsoffsets64.h: Regenerate.
Takashi Yano
Ken Brown
Corinna Vinschen
John Hood
Thomas Wolff