Commit Graph

399 Commits

Author SHA1 Message Date
Joseph Myers e974e7a083 * configure.ac (avr-*-*): Add comment about why libssp is disabled.
(microblaze*): Don't disable libssp.
	* configure: Regenerate.
2011-04-01 19:16:09 +00:00
Joseph Myers e5634b9e94 * configure.ac: Remove code setting CONFIG_SHELL, config_shell and
moveifchange.
	* configure: Regenerate.
	* Makefile.tpl: Use @SHELL@ not @config_shell@.
	* Makefile.in: Regenerate.
2011-04-01 13:44:53 +00:00
Joseph Myers ebc0cd5522 * configure.ac (*-*-sysv4*): Don't enable libgomp.
(alpha*-*-*vms*, i[[34567]]86-*-sco3.2v5*, mn10300-*-*,
	powerpc-*-chorusos*, powerpc*-*-eabi*, powerpc*-*-sysv*,
	powerpc*-*-kaos*, s390x-ibm-tpf*, sparc64-*-elf*, v850*-*-*,
	xtensa*-*-elf*, *-*-beos*, *-*-elf*, *-*-netware*, *-*-rtems*,
	*-*-sysv[[45]]*, *-*-vxworks*, *-wrs-windiss): Remove
	md_exec_prefix cases.
	* configure: Regenerate.
2011-04-01 13:42:02 +00:00
Joseph Myers d36ed46d3e * configure.ac: Separate cases disabling target-libssp,
target-libiberty, target-libstdc++-v3 and Fortran from general
	case over targets.
	* configure: Regenerate.
2011-04-01 12:00:58 +00:00
Joseph Myers 61cc119da0 * configure.ac (*-*-chorusos): Don't disable libgcj.
(*-*-freebsd[[12]] | *-*-freebsd[[12]].* | *-*-freebsd*aout*):
	Remove case.
	(*-*-kaos*): Don't disable GCC libraries, zlib or fastjar.
	(arm-*-coff): Don't disable libgcj.
	(arm*-*-linux-gnueabi): Remove useless assignment.
	(arm-*-riscix*): Don't disable libgcj.
	(bfin-*-*): Don't enable target-bsp and target-cygmon depending on
	configuration.
	(c4x-*-* | tic4x-*-*): Don't disable GCC libraries.
	(c54x*-*-*): Remove case.
	(tic54x-*-*): Don't disable GCC or GCC libraries.
	(cris-*-* | crisv32-*-*): Don't handle *-*-aout.  Change *-*-elf
	to *.
	(d10v-*-*): Don't disable GCC libraries.
	(d30v-*-*): Don't disable libgcj.
	(h8500-*-*): Don't disable GCC libraries.
	(i960-*-*): Don't disable libgcj.
	(i[[3456789]]86-*-linux*): Don't handle *-*-*libc1*.
	(i[[3456789]]86-*-sco3.2v5*, i[[3456789]]86-*-sco*,
	i[[3456789]]86-*-sysv4*, i[[3456789]]86-*-beos*): Don't disable
	libgcj.
	(m68k-*-coff*): Remove case.
	(mmix-*-*): Don't disable libgloss on host.
	(mn10200-*-*, mn10300-*-*): Remove cases.
	(powerpc*-*-winnt* | powerpc*-*-pe*, powerpcle-*-solaris*,
	powerpc-*-beos*, m68k-apollo-*, mips*-*-irix5*, mips*-*-bsd*):
	Don't disable libgcj.
	(romp-*-*): Remove case.
	(sparclite-*-*, sparc-*-sunos4*): Don't disable libgcj.
	(sparc-*-solaris2.[[0-6]] | sparc-*-solaris2.[[0-6]].*): Remove
	case.
	(v810-*-*): Don't disable GCC libraries.
	(v850*-*-*, vax-*-vms, xtensa*-*-*): Remove cases.
	(ip2k-*-*): Don't disable GCC libraries.
	* configure: Regenerate.
2011-04-01 11:58:07 +00:00
Joseph Myers 44dabc0869 * configure.ac (i[[3456789]]86-*-msdosdjgpp*): Don't disable
libffi on host.
	(x86_64-*-mingw*, i[[3456789]]86-*-mingw32*): Don't disable newlib
	on host.
	(c54x*-*-* | tic54x-*-*): Don't disable newlib on host.
	* configure: Regenerate.
2011-03-28 13:14:27 +00:00
Nick Clifton 573c698ac9 Add support for DragonFlyBSD target. 2011-03-28 11:18:20 +00:00
Joseph Myers 5b45e8c9e8 * configure.ac (native_only): Remove.
(i[[3456789]]86-*-msdosdjgpp*): Don't disable expect dejagnu
	send-pr uudecode guile gnuserv on host.
	(x86_64-*-mingw*): Don't disable expect dejagnu autoconf automake
	send-pr rcs guile perl texinfo libtool on host.
	(i[[3456789]]86-*-mingw32*): Don't disable expect dejagnu autoconf
	automake send-pr rcs guile perl texinfo libtool on host.
	(*-*-cygwin*, *-*-netbsd*): Remove host cases.
	(*-*-kaos*): Don't disable target-examples target-gperf on target.
	(alpha*-dec-osf*): Don't disable fileutils on target.
	(sh*-*-pe|mips*-*-pe|*arm-wince-pe): Don't disable target-examples
	texinfo send-pr expect dejagnu on target.
	(arm-*-elf* | arm*-*-eabi*, arm*-*-linux-gnueabi): Don't disable
	target-qthreads on target.
	(hppa*-hp-hpux11*, hppa*-*-*): Don't disable shellutils on target.
	(ia64*-*-elf*, ia64*-*-*vms*): Don't disable mmalloc on target.
	(i[[3456789]]86-w64-mingw*, i[[3456789]]86-*-mingw*,
	x86_64-*-mingw*): Don't disable expect on target.
	(*-*-cygwin*): Don't disable target-gperf on target.
	(powerpc*-*-winnt* | powerpc*-*-pe*): Don't disable make expect
	gnuserv on target.
	(powerpcle-*-solaris*): Don't disable make expect gnuserv on
	target.
	* configure: Regenerate.
2011-03-25 13:08:19 +00:00
Joseph Myers ccb5de3ec3 * configure.ac (target_tools): Remove target-groff.
(native_only): Remove target-groff.
	(hppa*64*-*-*): Don't disable byacc.
	(i[[3456789]]86-*-mingw32*): Remove commented-out noconfigdirs
	setting.
	(*-*-kaos*): Don't skip target-librx and target-groff.
	(*-*-netware*): Don't skip target-libmudflap.
	(*-*-tpf*): Don't skip target-libmudflap.
	(sh*-*-pe|mips*-*-pe|*arm-wince-pe): Don't condition configured
	directories on the host.
	(ia64*-*-*vms*): Don't skip tix.
	(sh-*-* | sh64-*-*): Don't condition skipped directories on the
	host.
	* configure: Regenerate.
2011-03-25 11:36:41 +00:00
Paolo Bonzini 3f984ad86f 2011-03-24 Paolo Bonzini <pbonzini@redhat.com>
* configure.ac: Remove references to mt-mep, mt-netware,
        mt-wince.
        * Makefile.def: Add all-utils soft dependencies.
        * Makefile.tpl: Remove GDB_NLM_DEPS.
        * configure: Regenerate.
        * Makefile.in: Regenerate.

config:
2011-03-24  Paolo Bonzini  <pbonzini@redhat.com>

        * mt-mep: Remove, obsolete.
        * mt-netware: Remove, obsolete.
        * mt-wince: Remove, obsolete.
        * mt-v810: Remove, unused.
2011-03-24 17:50:32 +00:00
Paolo Bonzini 0d77047a14 2011-03-24 Paolo Bonzini <bonzini@gnu.org>
Sync from GCC:

	2011-03-24  Paolo Bonzini  <bonzini@gnu.org>

	* configure.ac: Remove empty cases.
	* configure: Regenerate.

	2011-03-24  Paolo Bonzini  <bonzini@gnu.org>

	* Makefile.def: Add dependency from termcap to gdb.
	* Makefile.in: Regenerate.

	2011-03-24  Paolo Bonzini  <bonzini@gnu.org>

	* configure.ac: Remove all mentions of mh-sysv4 and mh-solaris.
	* configure: Regenerate.
	* Makefile.def: Remove all mentions of X11_FLAGS_TO_PASS.
	* Makefile.tpl: Likewise.
	* Makefile.in: Regenerate.

	2011-03-24  Paolo Bonzini  <bonzini@gnu.org>

	* configure.ac: Remove all mentions of tentative_cc.
	* configure: Regenerate.

	2011-03-16  Jack Howarth  <howarth@bromo.med.uc.edu>

	PR lto/48086
	* configure.ac: Re-enable LTO on *-apple-darwin9.
	* configure: Regenerate.

config:
2011-03-24  Paolo Bonzini  <bonzini@gnu.org>

	Sync from GCC:

	2011-03-24  Paolo Bonzini  <bonzini@gnu.org>

	* mh-cygwin: Remove obsolete variables and dependencies.

	2011-03-24  Paolo Bonzini  <bonzini@gnu.org>

	* mh-sysv4: Remove.
	* mh-solaris: Remove.

	2011-03-24  Paolo Bonzini  <bonzini@gnu.org>

	* mh-sysv4: Remove AR_CFLAGS.
2011-03-24 17:31:20 +00:00
Joseph Myers 4e55c4e3e0 * configure.ac (i[[3456789]]86-*-vsta, i[[3456789]]86-*-go32*,
i[[3456789]]86-*-beos*, powerpc-*-beos*, m68k-hp-hpux*,
	m68k-apollo-sysv*, m68k-apollo-bsd*, m88k-dg-dgux*,
	m88k-harris-cxux*, m88k-motorola-sysv*, mips*-dec-ultrix*,
	mips*-nec-sysv4*, mips*-sgi-irix4*, mips*-*-sysv4*, mips*-*-sysv*,
	i370-ibm-opened*, i[[3456789]]86-*-sysv5*, i[[3456789]]86-*-dgux*,
	i[[3456789]]86-ncr-sysv4.3*, i[[3456789]]86-ncr-sysv4*,
	i[[3456789]]86-*-sco3.2v5*, i[[3456789]]86-*-sco*,
	i[[3456789]]86-*-udk*, vax-*-ultrix2*, m68k-sun-sunos*,
	hppa*-*-hiux*, *-*-hiux*, rs6000-*-lynxos*, *-*-sysv4*,
	*-*-rhapsody*): Remove host cases.
	* configure: Regenerate.

config:
	* mh-cxux, mh-decstation, mh-dgux386, mh-lynxrs6k, mh-ncr3000,
	mh-necv4, mh-sco, mh-sysv5: Remove.
2011-03-24 16:52:11 +00:00
Joseph Myers 3d4d1d300a * configure.ac (ppc*-*-pe): Remove host case.
(strongarm-*-coff | xscale-*-coff, strongarm-*-elf* |
	xscale-*-elf*, thumb-*-coff, thumb-*-elf, thumb-*-pe, ep9312-*-elf
	| ep9312-*-coff, parisc*64*-*-linux*, ppc*-*-pe): Remove target
	cases.
	* configure: Regenerate.
2011-03-24 13:25:45 +00:00
Joseph Myers 4fcb78d9d3 * configure.ac (arm-semi-aof, crx-*-*, parisc*-*-linux*,
i370-*-opened*, i[[3456789]]86-moss-msdos | i[[3456789]]86-*-moss*
	| i[[3456789]]86-*-uwin*, mcore-*-pe*): Remove empty cases.
	* configure: Regenerate.
2011-03-22 20:04:36 +00:00
Joseph Myers 9aedc1d4f4 * config-ml.in: Don't handle arc-*-elf*.
* configure.ac (arc-*-*, crx-*-*, i[[3456789]]86-*-pe,
	m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*, mcore-*-pe*): Don't
	handle GCC libraries.
	* configure: Regenerate.
2011-03-22 20:01:13 +00:00
Rainer Orth eba1542c51 PR bootstrap/48120:
* configure.ac (pwllib): Use LIBS instead of LDFLAGS.
	Add -lstdc++ -lm to LIBS.
	* configure: Regenerate.
2011-03-21 13:03:34 +00:00
Sebastian Pop dfbab84c51 Adjust test of with_ppl.
2011-03-03  Sebastian Pop  <sebastian.pop@amd.com>

        * configure.ac: Adjust test of with_ppl.
        * configure: Regenerated.
2011-03-04 04:21:34 +00:00
Sebastian Pop 2e4cdd5582 Add -lpwl to ppllibs, and -lisl to clooglibs.
2011-03-02  Sebastian Pop  <sebastian.pop@amd.com>

	* configure.ac: Add -lpwl to ppllibs.
	* config/cloog.m4: Add -lisl to clooglibs.
	* configure: Regenerated.
2011-03-02 03:49:38 +00:00
Ralf Wildenhues a8ed311494 Sync toplevel and config/ from GCC.
/:
	Sync from GCC:

	2011-02-12  Alexandre Oliva  <aoliva@redhat.com>

	PR lto/47225
	* Makefile.def (lto-plugin): Double dash for enable-shared.
	(configure-gcc): Depend on all-lto-plugin.
	* Makefile.in: Rebuilt.

	2011-02-11  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>

	* configure.ac: Remove extra bracket.
	* configure: Regenerate.

	2011-02-06  Kai Tietz  <kai.tietz@onevision.com>

	PR lto/47225
	* Makefile.def: Add dependency for install-gcc
	on install-lto-plugin.
	* Makfile.in: Regenerated

	2011-01-25  Jakub Jelinek  <jakub@redhat.com>

	* configure.ac: If with_ppl is no, move setting with_cloog=no
	after CLOOG_REQUESTED check.
	* configure: Regenerated.

	2011-01-25  Sebastian Pop  <sebastian.pop@amd.com>

	* configure.ac: Call AC_MSG_ERROR when PPL 0.11 is not present and
	CLooG has been requested.
	* configure: Regenerated.

	2011-01-25  Sebastian Pop  <sebastian.pop@amd.com>

	* configure: Regenerated.
	* configure.ac: Check for version 0.11 (or later revision) of PPL.

	2011-01-25  Tobias Grosser  <grosser@fim.uni-passau.de>

	* configure: Regenerated.
	* configure.ac: Use CLOOG_CHECK_VERSION(0,16,1).

	2011-01-07  Jan Hubicka  <jh@suse.cz>

	PR lto/47225
	* Makefile.in: Regenerate.
	* Makefile.def (lto-plugin): Always pass enable-shared to the plugin
	configure.

config/:
2011-01-25  Jakub Jelinek  <jakub@redhat.com>

	* cloog.m4 (CLOOG_REQUESTED): Use $2 if --without-cloog.

2011-01-10  Jan Hubicka  <jh@suse.cz>

	* bootstrap-lto.mk: -fuse-linker-plugin is default now;
	pass -fno-lto to STAGEprofile.
2011-02-12 14:40:09 +00:00
Alexandre Oliva 3bd3027c34 PR libgcj/44341
* configure.ac: Discard --with-* flags for host when configuring
target libraries for cross build.
* configure: Rebuilt.
2011-01-31 05:26:01 +00:00
Andreas Schwab 5623c49951 Sync toplevel configure from GCC
2011-01-21  Andreas Schwab  <schwab@redhat.com>

	* configure.ac: Use AS_HELP_STRING throughout.
	* configure: Regenerate.

	2011-01-18  Jie Zhang  <jie.zhang@analog.com>

	* configure.ac (bfin-*-*): Remove gdb from noconfigdirs.
	* configure: Regenerate.
2011-01-21 13:29:47 +00:00
Joel Brobecker e82bcd79cd port GDB to ia64-hpux (native).
ChangeLog:

        * configure.ac: Remove readline, mmalloc, and gdb from noconfigdirs
        for ia64-hpux.
        * configure: Regenerate.

gdb/ChangeLog:

        * config/ia64/hpux.mh, ia64-hpux-nat.c, ia64-hpux-tdep.c,
        ia64-hpux-tdep.h, solib-ia64-hpux.c, solib-ia64-hpux.h: New files.

        * configure.host: Add handling for ia64-hpux hosts.  Add associated
        floatformats.
        * configure.tgt: Add handling for ia64-hpux targets.
        * Makefile.in (ALL_64_TARGET_OBS): Add ia64-hpux-tdep.o.
        (HFILES_NO_SRCDIR): Add ia64-hpux-tdep.h.
        (ALLDEPFILES): Add ia64-hpux-nat.c ia64-hpux-tdep.c.
2011-01-13 16:24:08 +00:00
Ralf Wildenhues 013cfaa1a2 Sync toplevel configure from GCC.
/:
	Sync from GCC:
	2010-12-22  Hariharan Sandanagobalane  <hariharan@picochip.com>

	* configure.ac: (picochip): Disable libiberty.
	* configure: Regenerate.
2011-01-02 16:40:07 +00:00
Ian Lance Taylor 8acbc359df PR bootstrap/46819
* configure.ac: For --disable-libgcj clear libgcj_saved.
	* configure: Rebuild.
2010-12-10 14:50:10 +00:00
Paolo Bonzini d4b549111c 2010-12-10 Tobias Burnus <burnus@net-b.de>
PR fortran/46540
	* configure.ac: Add --disable-libquadmath and
	--disable-libquadmath-support.
2010-12-10 12:09:34 +00:00
Ian Lance Taylor f2588cb91d * configure.ac: Always set default for poststage1_ldflags to
-static-libstdc++ -static-libgcc.
2010-12-07 21:20:22 +00:00
Hans-Peter Nilsson 51db009f1e PR libffi/46792
* configure.ac (cris-*-elf, crisv32-*-elf): Disable target-libffi.
	* configure: Regenerate.
2010-12-06 01:55:25 +00:00
Alexandre Oliva a52370396d PR other/46020
* configure.ac (CXX_FOR_TARGET): Add -funconfigured-libstdc++-v3.
* Makefile.def (CXX_FOR_TARGET): Removed from flags_to_pass.
* Makefile.tpl (CXX_FOR_TARGET_FLAG_TO_PASS): New.
(BASE_FLAGS_TO_PASS): Use it.
* configure: Rebuilt.
* Makefile.in: Rebuilt.
2010-11-26 04:56:39 +00:00
H.J. Lu 6805373e94 Properly check default linker.
2010-11-23  H.J. Lu  <hongjiu.lu@intel.com>

	PR binutils/12258
	* configure.ac: Correct comments for --enable-gold/--enable-ld.
	Properly check default linker.
	* configure: Regnerated.
2010-11-23 18:10:14 +00:00
Nick Clifton 679e4c82f1 * configure.ac: For --enable-gold, handle value `default' instead of
`both*'.   New configure option --{en,dis}able-ld.

ld, gold/
	* configure.ac: For --enable-gold, handle value `default' instead of
	`both*'. Always install ld as ld.gold, install as ld if gold is
	the default.
2010-11-23 13:39:56 +00:00
Ian Lance Taylor 77a5d6ccdf * configure.ac: Only disable a language library if no language needs
it.  Don't let --disable-libgcj uncondtionally disable libffi.
	* configure: Rebuild.

Also moved ChangeLog entry to correct file.
2010-11-21 01:56:30 +00:00
Paolo Bonzini 128691ed1b sync toplevel with gcc 2010-11-20 20:31:10 +00:00
Ralf Wildenhues 6f396dc7c0 PR other/46202: implement install-strip.
/:
	PR other/46202
	* configure.ac: Fix just-built in-tree STRIP name to be
	binutils/strip-new.
	* configure: Regenerate.
	* Makefile.def (install-strip-gcc, install-strip-binutils)
	(install-strip-opcodes, install-strip-ld, install-strip-itcl)
	(install-strip-sid): Mirror dependencies on non-strip variants
	of these targets on the respective -strip prerequisites.
	* Makefile.tpl (install-strip, install-strip-host)
	(install-strip-target): New targets.
	(install-strip-[+module+], install-strip-target-[+module+]):
	New targets.
	* Makefile.in: Regenerate.

etc/:
	* Makefile.in (install-strip): New target.


libiberty/:
	PR other/46202
	* Makefile.in (install-strip): New phony target.
	(install): Also mark as phony.
2010-11-20 19:37:57 +00:00
Ian Lance Taylor d5b7129a70 Merge from gcc top-level.
./:
	* configure.ac: Add target-libgo to target_libraries.  Set
	and substitute GOC_FOR_BUILD and GOC_FOR_TARGET.
	* Makefile.tpl (BUILD_EXPORTS): Add GOC and GOCFLAGS.
	(HOST_EXPORTS): Add GOC.
	(BASE_TARGET_EXPORTS): Add GOC.
	(GOC_FOR_BUILD, GOCFLAGS, GOC_FOR_TARGET): New variables.
	(GOCFLAGS_FOR_TARGET): New variable.
	(EXTRA_HOST_FLAGS): Add GOC.
	(EXTRA_TARGET_FLAGS): Add GOC and GOCFLAGS.
	* Makefile.def (target_modules): Add libgo.
	(flags_to_pass): Add GOC_FOR_TARGET and GOCFLAGS_FOR_TARGET.
	(dependencies): Add dependency from configure-target-libgo to
	configure-target-libffi and all-target-libstdc++-v3.  Add
	dependencies from all-target-libgo to all-target-libffi.
	(languages): Add go.
	* configure: Rebuild.
	* Makefile.in: Rebuild.

	* config-ml.in: Add Go support: treat GOC and GOCFLAGS like other
	compiler/flag environment variables.

	* configure.ac: Check for lang_requires_boot_languages in
	config-lang.in files.
	* configure: Rebuild.

	PR fortran/32049
	* Makefile.def: Add libquadmath; build it with language=fortran.
	* configure.ac: Add libquadmath.
	* Makefile.tpl: Handle multiple libs in check-[+language+].
	* Makefile.in: Regenerate.
	* configure: Regenerate.

	* configure.ac: Fix spelling in option names.
	* configure: Regenerated.

	PR bootstrap/39622
	* configure.ac (FLAGS_FOR_TARGET): Add include-fixed path.
	* configure: Regenerated.

	* config/cloog.m4: Add -enable-cloog-backend=(isl|ppl|ppl-legacy) to
	define the cloog backend to use. Furthermore, only pass the ppllibs to
	the configure checks, if necessary.
	* configure: Regenerate.

	* config/cloog.m4: Use CLooG predefined macro to check for CLooG PPL.
	* configure: regenerate

	* config/cloog.m4: Fix typo.  verison -> version.
	* configure: Regenerate.

	* config/cloog.m4: Pass ppl libraries to the CLooG version check.
	* configure: Regenerate.

	* configure.ac: Support official CLooG.org versions.
	* configure: Regenerate.
	* config/cloog.m4: New.

	* configure.ac (*-*-darwin*): Use mh-darwin for all Darwin variants.
	* configure: Regenerate.

config/:
	* cloog.m4 (CLOOG_INIT_FLAGS): Fix spelling in option names.

	* bootstrap-lto: Use -flto.

	* mh-darwin: Renamed from mh-ppc-darwin.
2010-11-19 22:06:27 +00:00
Dave Korn 5e504c84e1 Sync from gcc/
PR lto/46273
	* configure.ac: Remove libelf tests.  Build lto-plugin on ELF always
	and on other supported platforms whenever LTO is enabled.
	* configure: Rebuild.
2010-11-03 14:27:06 +00:00
Alan Modra c7fc8442f4 PR binutils/12110
* configure.ac: Error when source path contains spaces.
	* configure: Regenerate.
2010-11-02 00:22:10 +00:00
Dave Korn 1a91b8c0ac * configure.ac (build_lto_plugin): New shell variable.
(--enable-lto): Turn on by default for all non-ELF platforms that
	have had LTO support added so far.  Set build_lto_plugin appropriately
	for both ELF and non-ELF.
	(configdirs): Add lto-plugin or not based on build_lto_plugin.
	* configure: Regenerate.
2010-10-07 20:50:02 +00:00
Ralf Wildenhues 1d694d8e5c Allow to pass separate configure arguments for build, host and target.
/:
	PR bootstrap/45326
	PR bootstrap/45174
	* configure.ac: Honor initial values of $build_configargs,
	$host_configargs, $target_configargs.  Mark the precious, so
	environment settings get recorded.
	* configure: Regenerate.
2010-10-02 14:54:06 +00:00
Ralf Wildenhues 65a20d8c1b Sync toplevel and config from GCC.
/:
	Sync from GCC:

	2010-09-30  Michael Eager  <eager@eagercon.com>

	* configure.ac (microblaze): Add target-libssp to noconfigdirs.
	* configure: Regenerate.

	2010-09-21  Iain Sandoe  <iains@gcc.gnu.org>

	* configure.ac (enable-lto): Add Darwin to the list of supported lto
	targets and amend comment.
	* configure: Regenerate.

	2010-09-03  Jack Howarth <howarth@bromo.med.uc.edu>

	* configure.ac: Enable LTO by default on Darwin.
	* configure: Regenerate.

	2010-07-23  Marc Glisse <marc.glisse@normalesup.org>

	PR bootstrap/44455
	* configure.ac (extra_mpfr_configure_flags): Copy from
	extra_mpc_gmp_configure_flags.
	* configure: Re-generated.

config/:
	Sync from GCC:

	2010-09-10  Jonathan Yong  <jon_y@users.sourceforge.net>

	* dfp.m4: Enable decimal float for i?86 cygwin
	and mingw, and for x86_64 mingw.
2010-10-02 14:42:48 +00:00
Ralf Wildenhues ce28ff6b82 Fix unportable shell quoting.
/:
	Sync from GCC:

	PR bootstrap/44621
	* configure.ac: Fix unportable shell quoting.
	* configure: Regenerate.

config/:
	* po.m4 (AM_PO_SUBDIRS): Fix unportable shell quoting.

bfd/:
	* configure: Regenerate.

gas/:
	* configure: Regenerate.

gold/:
	* configure: Regenerate.

intl/:
	* configure: Regenerate.

ld/:
	* configure: Regenerate.

opcodes/:
	* configure: Regenerate.

binutils/:
	* configure: Regenerate.

gprof/:
	* configure: Regenerate.
2010-09-27 20:22:49 +00:00
Nick Clifton e3d36b30b4 Add support for v850E2 and v850E2V3 2010-07-23 14:52:53 +00:00
Ralf Wildenhues 112afadff0 Sync toplevel files from GCC.
/:
        Sync from GCC:

        2010-05-05  Sebastian Pop  <sebastian.pop@amd.com>
        * configure.ac: Allow all the versions greater than 0.10 of PPL.
        * configure: Regenerated.

        2010-04-20  Eric Botcazou  <ebotcazou@adacore.com>
        * configure.ac (BUILD_CONFIG): Redirect output to /dev/null.
        * configure: Regenerate.

        2010-04-17  Ralf Corsépius  <ralf.corsepius@rtems.org>
        * configure.ac (*-*-rtems*): Add target-libiberty to $skipdirs.
        * configure: Regenerate.

        2010-04-16  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>
        * configure.ac: Check for elf_getshdrstrndx or elf_getshstrndx
        separately.
        * configure: Regenerate.

        2010-04-13  Steve Ellcey  <sje@cup.hp.com>
        * configure: Regenerate after change to elf.m4.

        2010-04-02  Sebastian Pop  <sebastian.pop@amd.com>
        * configure.ac: Add brackets around AC_TRY_COMPILE alternative.
        * configure: Regenerated.

        2010-04-02  Sebastian Pop  <sebastian.pop@amd.com>
        * configure.ac: Print "buggy but acceptable" when CLooG
        revision is less than 9.
        * configure: Regenerated.

config/:
        Sync from GCC:

        2010-04-13  Steve Ellcey  <sje@cup.hp.com>
        * elf.m4: Add hppa[12]*-*-hpux* to list of non-elf platforms.

        2010-01-05  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>
        * stdint.m4 (GCC_HEADER_STDINT): Don't typedef uint8_t etc. if
        corresponding macros already exist.

bfd/:
        * configure: Regenerate.
2010-06-01 17:28:12 +00:00
Dave Korn 0b3906a813 Merge from gcc:
2010-05-18  Steven Bosscher  <steven AT gcc.gnu.org>
	* configure.ac (--enable-lto): All *-apple-darwin* now support LTO.
	* configure: Regenerate.

	2010-05-07  Steven Bosscher  <steven AT gcc.gnu.org>
	* configure.ac (--enable-lto): Add x86_64-apple-darwin* as
	a platform that supports LTO.
	* configure: Regenerate.

	2010-04-27  Dave Korn  <dave.korn.cygwin AT gmail.com>
	PR lto/42776
	* configure.ac (--enable-lto): Refactor handling so libelf tests
	are only performed inside then-clause of ACX_ELF_TARGET_IFELSE,
	and allow LTO to be explicitly enabled on non-ELF platforms that
	are known to support it inside else-clause.
	* configure: Regenerate.
2010-05-26 05:16:31 +00:00
Nick Clifton 32c2e09bba * configure.ac (--enable-gold): Support both, both/gold and
both/bfd to add gold to configdirs without removing ld.
        * configure: Regenerated.

        * Makefile.def: Add install-gold dependency to install-ld.
        * Makefile.in: Regenerated.
2010-04-27 14:24:37 +00:00
Tristan Gingold 9effb018f1 2010-04-14 Tristan Gingold <gingold@adacore.com>
* configure.ac (alpha*-*-*vms*): Remove ld from noconfigdirs.
	* configure: Regenerate.
2010-04-14 09:28:48 +00:00
Ralf Wildenhues 5d239c6195 /:
Merge from gcc:
	PR bootstrap/43615
	PR bootstrap/43328
	Revert:
	2010-03-31  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
	* configure.ac: Do not pass --enable-multilib nor
	--disable-multilib in baseargs.  Accept explicitly passed
	--enable_multilib.
	* configure: Regenerate.
2010-04-08 19:44:08 +00:00
Ralf Wildenhues aed3b6cda2 Fix toplevel configure --enable-multilib handling.
/:
	PR bootstrap/43328
	* configure.ac: Do not pass --enable-multilib nor
	--disable-multilib in baseargs.  Accept explicitly passed
	--enable_multilib.
	* configure: Regenerate.
2010-03-31 05:44:01 +00:00
Joseph Myers 6315af0f80 * configure.ac (tic6x-*-*): New case.
* configure: Regenerate.
2010-03-23 16:05:34 +00:00
Joseph Myers 105d67cb7e Merge from gcc:
2010-03-19  Jack Howarth <howarth@bromo.med.uc.edu>
	PR ada/42554
	* configure.ac: Only pass -c to ranlib for darwin9 and earlier.
	* configure: Regenerate.
2010-03-23 14:30:59 +00:00
Rainer Orth 56fbdfab68 PR libstdc++/32499
* configure.ac (RANLIB): Default to true.
	(STRIP): Likewise.
	(RANLIB_FOR_TARGET): Remove superfluous : argument.
	* configure: Regenerate.
2010-03-04 17:12:46 +00:00