The fastpath in tcp_output tries to send out
full segments, and avoid sending partial segments by
comparing against the static t_maxseg variable.
That value does not consider tcp options like timestamps,
while the initial window calculation is using
the correct dynamic tcp_maxseg() function.
Due to this interaction, the last, full size segment
is considered too short and not sent out immediately.
Reviewed by: tuexen
MFC after: 2 weeks
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D26478
for hw checksumming and TSO for VXLAN traffic.
These are similar to the existing VLAN capabilities.
Reviewed by: kib@
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D25873
Created with shm_open2(SHM_LARGEPAGE) and then configured with
FIOSSHMLPGCNF ioctl, largepages posix shared memory objects guarantee
that all userspace mappings of it are served by superpage non-managed
mappings.
Only amd64 for now, both 2M and 1G superpages can be requested, the
later requires CPU feature.
Reviewed by: markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D24652
Currently we use a single bit to indicate whether the virtual page is
part of a superpage. To support a forthcoming implementation of
non-transparent 1GB superpages, it is useful to provide more detailed
information about large page sizes.
The change converts MINCORE_SUPER into a mask for MINCORE_PSIND(psind)
values, indicating a mapping of size psind, where psind is an index into
the pagesizes array returned by getpagesizes(3), which in turn comes
from the hw.pagesizes sysctl. MINCORE_PSIND(1) is equal to the old
value of MINCORE_SUPER.
For now, two bits are used to record the page size, permitting values
of MAXPAGESIZES up to 4.
Reviewed by: alc, kib
Sponsored by: Juniper Networks, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D26238
The constant seems to exists on MacOS X >= 10.8.
Requested by: swills
Reviewed by: allanjude, kevans
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D25933
Lack of SHM_GROW_ON_WRITE is actively breaking Python's memfd_create tests,
so go ahead and implement it. A future change will make memfd_create always
set SHM_GROW_ON_WRITE, to match Linux behavior and unbreak Python's tests
on -CURRENT.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D25502
This change adds Hyper-V socket feature in FreeBSD. New socket address
family AF_HYPERV and its kernel support are added.
Submitted by: Wei Hu <weh@microsoft.com>
Reviewed by: Dexuan Cui <decui@microsoft.com>
Relnotes: yes
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D24061
- Add a new TCP_RXTLS_ENABLE socket option to set the encryption and
authentication algorithms and keys as well as the initial sequence
number.
- When reading from a socket using KTLS receive, applications must use
recvmsg(). Each successful call to recvmsg() will return a single
TLS record. A new TCP control message, TLS_GET_RECORD, will contain
the TLS record header of the decrypted record. The regular message
buffer passed to recvmsg() will receive the decrypted payload. This
is similar to the interface used by Linux's KTLS RX except that
Linux does not return the full TLS header in the control message.
- Add plumbing to the TOE KTLS interface to request either transmit
or receive KTLS sessions.
- When a socket is using receive KTLS, redirect reads from
soreceive_stream() into soreceive_generic().
- Note that this interface is currently only defined for TLS 1.1 and
1.2, though I believe we will be able to reuse the same interface
and structures for 1.3.
in getting the latest rack and bbr in from the NF repo. When those come in the
OOB data handling will be fixed where Skyzaller crashes.
Differential Revision: https://reviews.freebsd.org/D24575
This change is build on top of nexthop objects introduced in r359823.
Nexthops are separate datastructures, containing all necessary information
to perform packet forwarding such as gateway interface and mtu. Nexthops
are shared among the routes, providing more pre-computed cache-efficient
data while requiring less memory. Splitting the LPM code and the attached
data solves multiple long-standing problems in the routing layer,
drastically reduces the coupling with outher parts of the stack and allows
to transparently introduce faster lookup algorithms.
Route caching was (re)introduced to minimise (slow) routing lookups, allowing
for notably better performance for large TCP senders. Caching works by
acquiring rtentry reference, which is protected by per-rtentry mutex.
If the routing table is changed (checked by comparing the rtable generation id)
or link goes down, cache record gets withdrawn.
Nexthops have the same reference counting interface, backed by refcount(9).
This change merely replaces rtentry with the actual forwarding nextop as a
cached object, which is mostly mechanical. Other moving parts like cache
cleanup on rtable change remains the same.
Differential Revision: https://reviews.freebsd.org/D24340
specified by a #define. Also, add a comment describing the historical context
for this length.
Reviewed by: bz, jhb, kbowling (previous version)
MFC after: 2 weeks
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D24272
This is the foundational change for the routing subsytem rearchitecture.
More details and goals are available in https://reviews.freebsd.org/D24141 .
This patch introduces concept of nexthop objects and new nexthop-based
routing KPI.
Nexthops are objects, containing all necessary information for performing
the packet output decision. Output interface, mtu, flags, gw address goes
there. For most of the cases, these objects will serve the same role as
the struct rtentry is currently serving.
Typically there will be low tens of such objects for the router even with
multiple BGP full-views, as these objects will be shared between routing
entries. This allows to store more information in the nexthop.
New KPI:
struct nhop_object *fib4_lookup(uint32_t fibnum, struct in_addr dst,
uint32_t scopeid, uint32_t flags, uint32_t flowid);
struct nhop_object *fib6_lookup(uint32_t fibnum, const struct in6_addr *dst6,
uint32_t scopeid, uint32_t flags, uint32_t flowid);
These 2 function are intended to replace all all flavours of
<in_|in6_>rtalloc[1]<_ign><_fib>, mpath functions and the previous
fib[46]-generation functions.
Upon successful lookup, they return nexthop object which is guaranteed to
exist within current NET_EPOCH. If longer lifetime is desired, one can
specify NHR_REF as a flag and get a referenced version of the nexthop.
Reference semantic closely resembles rtentry one, allowing sed-style conversion.
Additionally, another 2 functions are introduced to support uRPF functionality
inside variety of our firewalls. Their primary goal is to hide the multipath
implementation details inside the routing subsystem, greatly simplifying
firewalls implementation:
int fib4_lookup_urpf(uint32_t fibnum, struct in_addr dst, uint32_t scopeid,
uint32_t flags, const struct ifnet *src_if);
int fib6_lookup_urpf(uint32_t fibnum, const struct in6_addr *dst6, uint32_t scopeid,
uint32_t flags, const struct ifnet *src_if);
All functions have a separate scopeid argument, paving way to eliminating IPv6 scope
embedding and allowing to support IPv4 link-locals in the future.
Structure changes:
* rtentry gets new 'rt_nhop' pointer, slightly growing the overall size.
* rib_head gets new 'rnh_preadd' callback pointer, slightly growing overall sz.
Old KPI:
During the transition state old and new KPI will coexists. As there are another 4-5
decent-sized conversion patches, it will probably take a couple of weeks.
To support both KPIs, fields not required by the new KPI (most of rtentry) has to be
kept, resulting in the temporary size increase.
Once conversion is finished, rtentry will notably shrink.
More details:
* architectural overview: https://reviews.freebsd.org/D24141
* list of the next changes: https://reviews.freebsd.org/D24232
Reviewed by: ae,glebius(initial version)
Differential Revision: https://reviews.freebsd.org/D24232
due to peer pressure switch over to opt-in instead of opt-out for epoch.
Instead of IFF_NEEDSEPOCH, provide IFF_KNOWSEPOCH. If driver marks
itself with IFF_KNOWSEPOCH, then ether_input() would not enter epoch
when processing its packets.
Now this will create recursive entrance in epoch in >90% network
drivers, but will guarantee safeness of the transition.
Mark several tested drivers as IFF_KNOWSEPOCH.
Reviewed by: hselasky, jeff, bz, gallatin
Differential Revision: https://reviews.freebsd.org/D23674
that marks Ethernet interfaces that supposedly may call into ether_input()
without network epoch.
They all need to be reviewed before 13.0-RELEASE. Some may need
be fixed. The flag is not planned to be used in the kernel for
a long time.
This makes it possible to retrieve per-connection statistical
information such as the receive window size, RTT, or goodput,
using a newly added TCP_STATS getsockopt(3) option, and extract
them using the stats_voistat_fetch(3) API.
See the net/tcprtt port for an example consumer of this API.
Compared to the existing TCP_INFO system, the main differences
are that this mechanism is easy to extend without breaking ABI,
and provides statistical information instead of raw "snapshots"
of values at a given point in time. stats(3) is more generic
and can be used in both userland and the kernel.
Reviewed by: thj
Tested by: thj
Obtained from: Netflix
Relnotes: yes
Sponsored by: Klara Inc, Netflix
Differential Revision: https://reviews.freebsd.org/D20655
add audit support for shm_rename
Co-mingling two things here:
* Addressing some feedback from Konstantin and Kyle re: jail,
capability mode, and a few other things
* Adding audit support as promised.
The audit support change includes a partial refresh of OpenBSM from
upstream, where the change to add shm_rename has already been
accepted. Matthew doesn't plan to work on refreshing anything else to
support audit for those new event types.
Submitted by: Matthew Bryan <matthew.bryan@isilon.com>
Reviewed by: kib
Relnotes: Yes
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D22083
This adds the glue to allocate TLS sessions and invokes it from
the TLS enable socket option handler. This also adds some counters
for active TOE sessions.
The TOE KTLS mode is returned by getsockopt(TLSTX_TLS_MODE) when
TOE KTLS is in use on a socket, but cannot be set via setsockopt().
To simplify various checks, a TLS session now includes an explicit
'mode' member set to the value returned by TLSTX_TLS_MODE. Various
places that used to check 'sw_encrypt' against NULL to determine
software vs ifnet (NIC) TLS now check 'mode' instead.
Reviewed by: np, gallatin
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D21891
This API is still young enough that I would expect no one to be dependant on
this yet... Swap the ordering while it's young to match Linux values to
potentially ease implementation of linuxolator syscall, being able to reuse
existing constants.
Add an atomic shm rename operation, similar in spirit to a file
rename. Atomically unlink an shm from a source path and link it to a
destination path. If an existing shm is linked at the destination
path, unlink it as part of the same atomic operation. The caller needs
the same permissions as shm_unlink to the shm being renamed, and the
same permissions for the shm at the destination which is being
unlinked, if it exists. If those fail, EACCES is returned, as with the
other shm_* syscalls.
truss support is included; audit support will come later.
This commit includes only the implementation; the sysent-generated
bits will come in a follow-on commit.
Submitted by: Matthew Bryan <matthew.bryan@isilon.com>
Reviewed by: jilles (earlier revision)
Reviewed by: brueffer (manpages, earlier revision)
Relnotes: yes
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D21423
memfd_create is effectively a SHM_ANON shm_open(2) mapping with optional
CLOEXEC and file sealing support. This is used by some mesa parts, some
linux libs, and qemu can also take advantage of it and uses the sealing to
prevent resizing the region.
This reimplements shm_open in terms of shm_open2(2) at the same time.
shm_open(2) will be moved to COMPAT12 shortly.
Reviewed by: markj, kib
Differential Revision: https://reviews.freebsd.org/D21393
shm_open2 allows a little more flexibility than the original shm_open.
shm_open2 doesn't enforce CLOEXEC on its callers, and it has a separate
shmflag argument that can be expanded later. Currently the only shmflag is
to allow file sealing on the returned fd.
shm_open and memfd_create will both be implemented in libc to use this new
syscall.
__FreeBSD_version is bumped to indicate the presence.
Reviewed by: kib, markj
Differential Revision: https://reviews.freebsd.org/D21393
This is a completely separate TCP stack (tcp_bbr.ko) that will be built only if
you add the make options WITH_EXTRA_TCP_STACKS=1 and also include the option
TCPHPTS. You can also include the RATELIMIT option if you have a NIC interface
that supports hardware pacing, BBR understands how to use such a feature.
Note that this commit also adds in a general purpose time-filter which
allows you to have a min-filter or max-filter. A filter allows you to
have a low (or high) value for some period of time and degrade slowly
to another value has time passes. You can find out the details of
BBR by looking at the original paper at:
https://queue.acm.org/detail.cfm?id=3022184
or consult many other web resources you can find on the web
referenced by "BBR congestion control". It should be noted that
BBRv1 (which this is) does tend to unfairness in cases of small
buffered paths, and it will usually get less bandwidth in the case
of large BDP paths(when competing with new-reno or cubic flows). BBR
is still an active research area and we do plan on implementing V2
of BBR to see if it is an improvement over V1.
Sponsored by: Netflix Inc.
Differential Revision: https://reviews.freebsd.org/D21582
Define __daddr_t in _types.h and use it in filio.h
Reported by: ian, bde
Reviewed by: ian, imp, cem
MFC after: 2 weeks
MFC-With: 349233
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D20715
This ioctl exposes VOP_BMAP information to userland. It can be used by
programs like fragmentation analyzers and optimized cp implementations. But
I'm using it to test fusefs's VOP_BMAP implementation. The "2" in the name
distinguishes it from the similar but incompatible FIBMAP ioctls in NetBSD
and Linux. FIOBMAP2 differs from FIBMAP in that it uses a 64-bit block
number instead of 32-bit, and it also returns runp and runb.
Reviewed by: mckusick
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D20705
ioctl(2) commands only have meaning in the context of a file descriptor
so translating them in the syscall layer is incorrect.
The new handler users an accessor to retrieve/construct a pointer from
the last member of the passed structure and relies on type punning to
access the other member which requires no translation.
Unlike r339174 this change supports both places FIODGNAME is handled.
Reviewed by: kib
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D17475
Mainly focus on files that use BSD 3-Clause license.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
This makes roundup2/rounddown2 type- and const-preserving and allows
using it on pointer types without casting to uintptr_t first. Not
performing pointer-to-integer conversions also helps the compiler's
optimization passes and can therefore result in better code generation.
When using it with integer values there should be no change other than
the compiler checking that the alignment value is a valid power-of-two.
I originally implemented these builtins for CHERI a few years ago and
they have been very useful for CheriBSD. However, they are also useful
for non-CHERI code so I was able to upstream them for Clang 10.0.
Rationale from the clang documentation:
Clang provides builtins to support checking and adjusting alignment
of pointers and integers. These builtins can be used to avoid relying
on implementation-defined behavior of arithmetic on integers derived
from pointers. Additionally, these builtins retain type information
and, unlike bitwise arithmetic, they can perform semantic checking on
the alignment value.
There is also a feature request for GCC, so GCC may also support it in
the future: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=98641
Reviewed By: brooks, jhb, imp
Differential Revision: https://reviews.freebsd.org/D28332
The age of the intel compiler support is so old as to be
uninteresting. No recent recports of intel compiler support have been
received. Remove all the special case workarounds for the Intel
compiler. Should there be interest in supporting the compiler, contact
me and I'll work with people to make it happen, though I suspect these
instances are more likely to be in the way than to be helpful.
Reviewed by: cem, emaste, vangyzen, dim
Differential Revision: https://reviews.freebsd.org/D26817
This fixes the following warning in libbsd:
rtems/blkdev.h:200:10: warning: implicit declaration of function 'ioctl'; did
you mean 'ifioctl'? [-Wimplicit-function-declaration]
Remove unnecessary includes.
Define FD_SETSIZE (<sys/select.h>) to be 1024 by default, and define
NOFILE (<sys/param.h>) to be OPEN_MAX (== 3200) by default.
Remove the comment in <sys/select.h> that FD_SETSIZE should be >=
NOFILE.
Bump API minor.
Addresses: https://cygwin.com/pipermail/cygwin/2022-July/251839.html
This reverts commit 1f8f7e2d54, "* libc/stdio/refill.c (__srefill):
Try again after EOF on Cygwin." If EOF is set on a file, the stdio
input functions will now immediately return EOF rather than trying
again to read. This aligns Cygwin's behavior to that of Linux.
Addresses: https://cygwin.com/pipermail/cygwin/2022-June/251672.html
The introduction of <sched.h> improved compatibility with some 3rd
party software, but caused the configure scripts of some ports to
assume that they were run in a GLIBC compatible environment.
Parts of sched.h were made conditional on -D_WITH_CPU_SET_T being
added to ports, but there still were compatibility issues due to
invalid assumptions made in autoconfigure scripts.
The differences between the FreeBSD version of macros like CPU_AND,
CPU_OR, etc. and the GLIBC versions was in the number of arguments:
FreeBSD used a 2-address scheme (one source argument is also used as
the destination of the operation), while GLIBC uses a 3-adderess
scheme (2 source operands and a separately passed destination).
The GLIBC scheme provides a super-set of the functionality of the
FreeBSD macros, since it does not prevent passing the same variable
as source and destination arguments. In code that wanted to preserve
both source arguments, the FreeBSD macros required a temporary copy of
one of the source arguments.
This patch set allows to unconditionally provide functions and macros
expected by 3rd party software written for GLIBC based systems, but
breaks builds of externally maintained sources that use any of the
following macros: CPU_AND, CPU_ANDNOT, CPU_OR, CPU_XOR.
One contributed driver (contrib/ofed/libmlx5) has been patched to
support both the old and the new CPU_OR signatures. If this commit
is merged to -STABLE, the version test will have to be extended to
cover more ranges.
Ports that have added -D_WITH_CPU_SET_T to build on -CURRENT do
no longer require that option.
The FreeBSD version has been bumped to 1400046 to reflect this
incompatible change.
Reviewed by: kib
MFC after: 2 weeks
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D33451
The changes to the bitset macros allowed sched.h to be included
into userland programs without name space pollution due to BIT_*
and BITSET_* macros.
The definition of a "struct bitset" had been overlooked. This name
space pollution caused the build of port print/miktex to fail.
This commit makes the definition of struct bitset depend on the
same condition as the visibility of the BIT_* and BITSET_* macros,
i.e. needs _KERNEL or _WANT_FREEBSD_BITSET to be defined before
including sys/_bitset.h.
It has been tested with "make universe" since a prior attempt to
fix the issue broke the PowerPC64 kernel build.
This commit shall be MFCed together with commit 5e04571cf3c.
Reported by: arrowd
MFC after: 1 month
It caused kernel build for PowerPC64 to fail.
A different patch is being tested with make universe to make sure it
works on all architectures.
MFC after: 1 month<N [day[s]|week[s]|month[s]]. Request a reminder email>
There is a reference to malloc() in #define __BITSET_ALLOC. Even
though this macro is only defined but not used, it causes the lang/gcc
ports to fail. The gcc ports "poison" a number of functions including
malloc() and prevent their use (including in macro definitions).
This commit moved the declaration of __BITSET_ALLOC into the
conditional block that depends on _KERNEL or _WANT_FREEBSD_BITSET
being defined.
There is no use of __BITSET_ALLOC in the FreeBSD sources, and userland
programs that want to use BITSEC_ALLOC will define _WANT_FREEBSD_BITSET
anyway.
This patch has been tested by building lang/gcc11 and a successful
make buildworld.
This commit shall be MFCed together with commit 5e04571cf3c.
MFC after: 1 month
The changes to the bitset macros allowed sched.h to be included into
userland programs without name space pollution due to BIT_* and
BITSET_* macros.
The definition of a global variable "bitset" had been overlooked.
This name space pollution caused a compile failure in print/miktex.
This commit renames the bitset variable to __bitset with the same
mapping back to the bitset if _KERNEL or _WANT_FREEBSD_BITSET is
defined.
This fix has been suggested by kib. It has been tested to let the
build of the print/miktex port succeed and to not break buildworld.
This commit shall be MFCed together with commit 5e04571cf3c.
Reported by: arrowd
MFC after: 1 month
Add two underscore characters "__" to names of BIT_* and BITSET_*
macros to move them to the implementation name space and to prevent
a name space pollution due to BIT_* macros in 3rd party programs with
conflicting parameter signatures.
These prefixed macro names are used in kernel header files to define
macros in e.g. sched.h, sys/cpuset.h and sys/domainset.h.
If C programs are built with either -D_KERNEL (automatically passed
when building a kernel or kernel modules) or -D_WANT_FREENBSD_BITSET
(or this macros is defined in the source code before including the
bitset macros), then all macros are made visible with their previous
names, too. E.g., both __BIT_SET() and BIT_SET() are visible with
either of _KERNEL or _WANT_FREEBSD_BITSET defined.
The main reason for this change is that some 3rd party sources
including sched.h have been found to contain conflicting BIT_*
macros.
As a work-around, parts of shed.h have been made conditional and
depend on _WITH_CPU_SET_T being set when sched.h is included.
Ports that expect the full functionality provided by sched.h need
to be built with -D_WITH_CPU_SET_T. But this leads to conflicts if
BIT_* macros are defined in that program, too.
This patch set makes all of sched.h visible again without this
parameter being passed and without any name space pollution due
to BIT_* macros becoming visible when sched.h is included.
This patch set will be backported to the STABLE branches, but ports
will need to use -D_WITH_CPU_SET_T as long as there are supported
releases that do not contain these patches.
Reviewed by: kib, markj
MFC after: 1 month
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D33235
This implementation is faster and doesn't modify the cpuset, so it lets
us avoid some unnecessary copying as well. No functional change
intended.
This is a re-application of commit
9068f6ea697b1b28ad1326a4c7a9ba86f08b985e.
Reviewed by: cem, kib, jhb
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32029
Eliminate the nested loops and re-implement following a suggestion from
rlibby.
Add some simple regression tests.
Reviewed by: rlibby, kib
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32472
This reverts commit 9068f6ea697b1b28ad1326a4c7a9ba86f08b985e.
The underlying macro needs to be reworked to avoid problems with control
flow statements.
Reported by: rlibby
This implementation is faster and doesn't modify the cpuset, so it lets
us avoid some unnecessary copying as well. No functional change
intended.
Reviewed by: cem, kib, jhb
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32029
These allow one to non-destructively iterate over the set or clear bits
in a bitset. The motivation is that we have several code fragments
which iterate over a CPU set like this:
while ((cpu = CPU_FFS(&cpus)) != 0) {
cpu--;
CPU_CLR(cpu, &cpus);
<do something>;
}
This is slow since CPU_FFS begins the search at the beginning of the
bitset each time. On amd64 and arm64, CPU sets have size 256, so there
are four limbs in the bitset and we do a lot of unnecessary scanning.
A second problem is that this is destructive, so code which needs to
preserve the original set has to make a copy. In particular, we have
quite a few functions which take a cpuset_t parameter by value, meaning
that each call has to copy the 32 byte cpuset_t.
The new macros address both problems.
Reviewed by: cem, kib
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32028
iflib now supports mapping each (TX,RX) queue pair to the same CPU
(default), to separate CPUs, or to a pair of physical and logical CPUs
that share the same L2 cache. The mapping mechanism supports unequal
numbers of TX and RX queues, with the excess queues always being
mapped to consecutive physical CPUs. When the platform cannot
distinguish between physical and logical CPUs, all are treated as
physical CPUs. See the comment on get_cpuid_for_queue() for the
entire matrix.
The following device-specific tunables influence the mapping process:
dev.<device>.<unit>.iflib.core_offset (existing)
dev.<device>.<unit>.iflib.separate_txrx (existing)
dev.<device>.<unit>.iflib.use_logical_cores (new)
The following new, read-only sysctls provide visibility of the mapping
results:
dev.<device>.<unit>.iflib.{t,r}xq<n>.cpu
When an iflib driver allocates TX softirqs without providing reference
RX IRQs, iflib now binds those TX softirqs to CPUs using the above
mapping mechanism (that is, treats them as if they were TX IRQs).
Previously, such bindings were left up to the grouptaskqueue code and
thus fell outside of the iflib CPU mapping strategy.
Reviewed by: kbowling
Tested by: olivier, pkelsey
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D24094
That is, provide wrappers around the atomic_testandclear and
atomic_testandset primitives.
Submitted by: jeff
Reviewed by: cem, kib, markj
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D22702
An upcoming patch to use the bitset macros for tracking vm page
dump information could conceivably need more than INT_MAX bits.
Expand the bit type to long so that the extra range is available
on 64-bit platforms where it would most likely be needed.
CPUSET_COUNT and DOMAINSET_COUNT are also modified to remain of
type `int`.
Reviewed by: kib, markj
Approved by: scottl (implicit)
MFC after: 1 week
Sponsored by: Ampere Computing, Inc.
Differential Revision: https://reviews.freebsd.org/D26190
s/BIT_NAND/BIT_ANDNOT/, and for CPU and DOMAINSET too. The actual
implementation is "and not" (or "but not"), i.e. A but not B.
Fortunately this does appear to be what all existing callers want.
Don't supply a NAND (not (A and B)) operation at this time.
Discussed with: jeff
Reviewed by: cem
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D22791
We have a couple optimizations for when the bitset is known to be just
one word. But with dynamically sized bitsets, it was actually more work
to determine the size than just to do the necessary computation. Now,
only use the optimization when the size is known to be constant.
Reviewed by: markj
Discussed with: jeff
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D22639
The _REENT_GLOBAL_STDIO_STREAMS was introduced by commit
668a4c8722 in 2017. Since then it was enabled by
default for RTEMS. Recently, the option was enabled for Cygwin which
previously used an alternative implementation to use global stdio streams.
In Newlib, the stdio streams are defined to thread-specific pointers
_reent::_stdin, _reent::_stdout and _reent::_stderr. If the option is disabled
(the default for most systems), then these pointers are initialized to
thread-specific FILE objects which use file descriptors 0, 1, and 2,
respectively. There are at least three problems with this:
(1) The thread-specific FILE objects are closed by _reclaim_reent(). This
leads to problems with language run-time libraries that provide wrappers to
the C/POSIX stdio streams (for example C++ and Ada), since they use the
thread-specific FILE objects of the initialization thread. In case the
initialization thread is deleted, then they use freed memory.
(2) Since thread-specific FILE objects are used with a common output device via
file descriptors 0, 1 and 2, the locking at FILE object level cannot ensure
atomicity of the output, e.g. a call to printf().
(3) There are resource managment issues, see:
https://sourceware.org/pipermail/newlib/2022/019558.htmlhttps://bugs.linaro.org/show_bug.cgi?id=5841
This patch enables the _REENT_GLOBAL_STDIO_STREAMS behaviour for all Newlib
configurations and removes the option. This removes a couple of #ifdef blocks.
For _REENT_GLOBAL_STDIO_STREAMS, lock/unlock all FILE objects. In the
repository, this function is only used by Cygwin during process forks. Since
Cygwin enabled _REENT_GLOBAL_STDIO_STREAMS recently, without this fix no FILE
object at all was locked.
Do not initialize __sglue with the FILE objects of _GLOBAL_REENT to avoid a
double use in the !_REENT_SMALL and !_REENT_GLOBAL_STDIO_STREAMS configurations
which didn't use a thread-specific reentrancy structure.
Remove "32" or "64" from each of the following names: acl32,
aclcheck32, aclfrommode32, aclfrompbits32, aclfromtext32, aclsort32,
acltomode32, acltopbits32, acltotext32, facl32, fchown32, fcntl64,
fstat64, _fstat64, _fstat64_r, ftruncate64, getgid32, getgrent32,
getgrgid32, getgrnam32, getgroups32, getpwuid32, getpwuid_r32,
getuid32, getuid32, initgroups32, lseek64, lstat64, mknod32, mmap64,
setegid32, seteuid32, setgid32, setgroups32, setregid32, setreuid32,
setuid32, stat64, _stat64_r, truncate64.
Remove prototypes and macro definitions of these names.
Remove "#ifndef __INSIDE_CYGWIN__" from some headers so that the new
names will be available when compiling Cygwin.
Remove aliases that are no longer needed.
Include <unistd.h> in fhandler_clipboard.cc for the declarations of
geteuid and getegid.
The __sFILE::_lock member is present if __SINGLE_THREAD__ is not defined. In
this case, it is initialized in __sfp(). It is a bug to do it sometimes also
in std().
The compiler warns the double parentheses are unnecessary in some
target, and cause fail cases when doing some testcases in regression.
gcc/testsuite/g++.dg/warn/Wstringop-overflow-6.C
Remove the unnecessary parentheses will fix it. See more details in
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=85775
Same like in commit 0542583129,
Author: Maxim Blinov <maxim.blinov@embecosm.com>
Date: Thu Jul 22 22:41:42 2021 +0100
Remove unneccesary parenthesis around declarator
Thanks for Sebastian Huber's remind!
For the exit processing only members of _GLOBAL_REENT were used by default. If
the _REENT_GLOBAL_ATEXIT option was enabled, then the data structures were
provided through dedicated global objects. Make this option the default.
Remove the option. Rename struct _reent members _atexit and _atexit0 to
_reserved_6 and _reserved_7, respectively. Provide them only if
_REENT_BACKWARD_BINARY_COMPAT is defined.
Rename struct _reent::_new::_unused members _nextf and _nmalloc to _reserved_3
and _reserved_4, respectively. Rename struct _reent::_new member _unused to
_reserved_5. Provide them only if _REENT_BACKWARD_BINARY_COMPAT is defined.
Remove unused _N_LISTS define.
Add the --enable-newlib-reent-binary-compat configure option. This option is
disabled by default. If enabled, then unused members in struct _reent are
preserved to maintain the structure layout.
Added a new global __sglue object for all configurations.
Decouples the global file object list from the _GLOBAL_REENT
structure by using this new object instead of the __sglue member
of _GLOBAL_REENT in __sfp() and _fwalk_sglue().
Replaced _fwalk_reent() with _fwalk_sglue(). The change adds an
extra __sglue object as a parameter, which will allow the passing
of a global __sglue object separate from the __sglue member of
struct _reent. The global __sglue object will be added in a
follow-on patch.
Define the configuration-dependent constant CLEANUP_FILE for use in
cleanup_stdio(). This will reduce duplicate code during the addition
of a dedicated stdio atexit handler in a follow-on patch.
Moved last remaining __sglue initializations from __sinit() to
__sfp(). The move better encapsulates access to __sglue and
facilitates its decoupling from struct _reent in a follow-on patch.
Remove __sinit_lock_acquire() and __sinit_lock_release(). Replace these with
__sfp_lock_acquire() and __sfp_lock_release(), respectively. This eliminates a
potential deadlock issue between __sinit() and __sfp(). Remove now unused
__sinit_recursive_mutex and __lock___sinit_recursive_mutex.
Added _REENT_INIT_SGLUE and _REENT_INIT_SGLUE_ZEROED macros
to initialize __sglue member of struct _reent. This allows
further simplification of __sinit() and facilitates the removal
of __sglue as a member of struct _reent for certain configurations
in a follow-on patch.
Removed duplicate sglue initializations from __sinit(). These
are already initialized in the _REENT_INIT macro in sys/reent.h.
This simplification enables the reduction of _GLOBAL_REENT
dependency in a follow-on patch.
Removed duplicate stdio initializations from __sinit(). These
are already initialized in the _REENT_INIT macro in sys/reent.h.
This simplification enables the reduction of _GLOBAL_REENT
dependency in a follow-on patch.
../newlib/libc/libc.xml:22242: element refentry: validity error : ID iconv already defined
<refentry id="iconv">
Use a separate namespace for chaper ids, to avoid collision between the
ids for the chapter and function 'iconv', now that iconv documentation
is generated unconditionally.
Unless make is invoked with V=1, have xmlto pass the parameter
'man.output.quietly=1' to xsltproc to suppress "Note: Writing foo.N"
output from the manpages stylesheet.
(This doesn't quite do what it says: The output is not silenced if V has
any value, including 0. You could consider that either a bug or a
feature.)
Richard Scheffenegger
Navdeep Parhar
Konstantin Belousov
Mark Johnston
Mateusz Guzik
Kyle Evans
Wei Hu
John Baldwin
Randall Stewart
Alexander V. Chernikov
Jonathan T. Looney
Gleb Smirnoff
Michael Tuexen
Edward Tomasz Napierala
David Bright
Alan Somers
Brooks Davis
Pedro F. Giffuni
Sebastian Huber
Warner Losh
Alex Richardson
Ken Brown
Stefan Eßer
Patrick Kelsey
Ryan Libby
D Scott Phillips
Jeff Roberson
jdoubleu
Jeff Johnston
Jia-Wei Chen
Matt Joyce
Jon Turney