graphics mode and transform wide characters in ASCII small
letter range to corresponding graphics.
(__vt100_conv): Table to transform small ASCII letters to line
drawing graphics for use in VT100 graphics mode.
(write_normal): Check for SO/SI control characters to
enable/disable VT100 graphics mode.
(base_chars): Enable SO/SI control characters for detection.
(write): Check for ESC ( 0 / ESC ( B escape sequences to
enable/disable VT100 graphics mode. Also detect ">" while
parsing ESC [ sequences to distinguish specific requests.
(char_command): Distinguish Secondary from Primary Device Attribute
request to report more details about cygwin console terminal version.
* fhandler.h (vt100_graphics_mode_active): New flag to indicate mode.
(saw_greater_than_sign): New parse flag for ESC [ > sequences.
(gotparen, gotrparen): New state values to parse ESC ( / ) sequences.
* fhandler_console.cc (read): Allow combined Alt-AltGr modifiers
to also produce an ESC prefix like a plain Alt modifier, e.g. to make
Alt-@ work on a keyboard where @ is AltGr-q.
events (for completion of mouse reporting mode 1000) and mouse
movement events (for additional mouse reporting modes 1002 and 1003).
Use mouse_aware() as a guard and only condition for mouse
reporting in order to enforce consistence of read() and select().
Add focus reports (for additional focus reporting mode 1004).
(mouse_aware): Enable detection of additional mouse events for select().
Tune function to precisely match actual reporting criteria.
Move adjustment of mouse position (by window scroll offset)
here to avoid duplicate code.
(char_command): Initialization of enhanced mouse reporting modes.
Initialization of focus reporting mode.
* fhandler.h (use_mouse): Change flag (bool->int) to indicate
additional mouse modes. Add flag to indicate focus reporting.
(mouse_aware): Move enhanced function into fhandler_console.cc.
* select.cc (peek_console): Use modified mouse_aware() for more
general detection of mouse events. Also check for focus reports.
str_to_con.
* fhandler_console.cc (dev_console::con_to_str): Simplify. Always
default to the current internal locale.
(dev_console::get_console_cp): Always use codepage 437 for alternate
charset.
(dev_console::str_to_con): Constify charset parameter.
(fhandler_console::write_normal): Always use codepage 437 for alternate
charset. Otherwise always default to the current internal locale.
Replace ASCII SO with ASCII CAN.
* strfuncs.cc: Tweka comments according to below changes.
(sys_cp_wcstombs): Constify charset parameter. Convert all wchar_t
values in the Unicode private use area U+F0xx to the singlebyte
counterpart. Drop special handling creating ASCII SO sequence from
U+DCxx value. Rearrange for performance. Replace ASCII SO with
ASCII CAN.
(sys_cp_mbstowcs): Constify charset parameter. Replace ASCII SO with
ASCII CAN. Drop special case for U+DCxx ASCII SO sequences. Always
create a replacement from the Unicode private use area U+F0xx for
invalid byte values in a multibyte sequence. Do the same for wchar_t
values from the U+F0xx range to make them roundtrip safe.
* wchar.h (sys_cp_wcstombs): Constify charset parameter.
(sys_cp_mbstowcs): Ditto.
* sigproc.cc (wait_for_sigthread): Ditto. Don't synchronize with wait_sig
after receiving an event that it is ready to go.
(init_sig_pipe): New function.
(wait_sig): Call init_sig_pipe to create pipes for communicating signals to
this process. Don't send sigCONT signal when initializing.
* fork.cc (frok::child): Accommodate wait_for_sigpipe parameter change.
* fhandler.h (fhandler_*::write): Make ssize_t/__stdcall.
(fhandler_*::write_overlapped): Ditto.
(fhandler_*::raw_write): Ditto.
(fhandler_*::readv): Ditto.
(fhandler_*::writev): Ditto.
(fhandler_*::raw_read): Make __stdcall.
* fhandler: Accommodate changes to read/write functions throughout.
* fhandler_clipboard.cc: Ditto.
* fhandler_console.cc: Ditto.
* fhandler_dsp.cc: Ditto.
* fhandler_fifo.cc: Ditto.
* fhandler_mailslot.cc: Ditto.
* fhandler_mem.cc: Ditto.
* fhandler_mem.cc: Ditto.
* fhandler_random.cc: Ditto.
* fhandler_tape.cc: Ditto.
* fhandler_tty.cc: Ditto.
* fhandler_virtual.cc: Ditto.
* fhandler_windows.cc: Ditto.
* fhandler_zero.cc: Ditto.
* syscalls.cc (readv): Use ssize_t as temp variable.
* fhandler.cc (fhandler_base::read): Coerce returned len to signed or it will
never be treated as < 0.
(fhandler_base::wait_overlapped): Minimize calls to GetLastError. Remove
duplicate debugging test. Fix error return.
* fhandler.h (fhandler_fifo::fifo_name): Declare new function.
(fhandler_fifo::close): Ditto.
(fhandler_fifo::dup): Ditto.
(fhandler_fifo::close_on_exec): Ditto.
* fhandler.cc (fhandler_fifo::fifo_name): Define new function.
(FIFO_BUF_SIZE): New define.
(cnp): Ditto.
(fhandler_fifo::open): Rework. Use cnp to open named pipe. Always open write
side as a client. Open dummy client when writing and can't connect.
(wait): Rework. Implement fifo_wait_for_next_client. Handle signals during
connect better. Add new fifo_wait_for_server code which polls
(sigh) waiting for server.
(fhandler_fifo::raw_read): Handle transition states when one client closes and
another is available.
(fhandler_fifo::close): Define.
(fhandler_fifo::dup): Ditto.
(fhandler_fifo::close_on_exec): Ditto.
* fhandler.h (fhandler_console::create_invisible_console): Declare new
function.
(create_invisible_console_workaround): Ditto.
* fhandler_console.cc (fhandler_console::create_invisible_console): Define new
function.
(create_invisible_console_workaround): Ditto. Add too much code to deal with
broken Windows 7. Use a helper app to start an invisible console window.
(fhandler_console::need_invisible): Reorganize to use helper functions to
create invisible console.
* spawn.cc (spawn_guts): Avoid zeroing already zeroed fields in si.
(initial_env): Set jit_debug when we are automatically starting a gdb process.
* dtable.cc (dtable::get_debugger_info): Don't tty tricks when we are being
debugged by our own captive gdb, as determined by jit_debug == true.
(dtable::init_std_file_from_handle): Detect errors when initializing a tty
early rather than at random points later.
* fhandler.h (fhandler_*::init): Return int to indicate success/failure.
* fhandler.cc (fhandler_base::init): Reflect change in return value.
* pipe.cc (fhandler_pipe::init): Ditto.
(fhandler_pipe::create_selectable): Don't say we're retrying when we aren't.
* fhandler_console.cc (fhandler_console::init): Ditto. Return success/failure.
* fhandler_serial.cc (fhandler_serial::init): Ditto.
* fhandler_tty.cc (fhandler_tty_slave::init): Ditto.
(fhandler_tty_slave::open): Make debugging output more detailed.
* tty.cc (tty_list::terminate): Don't close I/O handles before all slaves have
checked in.
(tty::slave_alive): Make a non-inlined function. Check if tty pipe handles can
be created as an additional exists check.
* tty.h (tty::slave_alive): Just define here.
* cygheap.h (struct cygheap_locale): New structure.
(struct user_heap_info): Add cygheap_locale member locale.
* dcrt0.cc (dll_crt0_1): Revert to calling _setlocale_r so that only
the applications locale is reverted to "C".
* environ.cc (environ_init): Remove unused got_lc variable.
* fhandler.h (class dev_console): Remove now unsed locale variables.
* fhandler_console.cc (fhandler_console::get_tty_stuff): Remove
setting dev_console's locale members.
(dev_console::con_to_str): Use internal locale settings. Default to
__ascii_wctomb if charset is "ASCII".
(fhandler_console::write_normal): Ditto.
* strfuncs.cc (__ascii_wctomb): Drop declaration.
(__db_wctomb): Use fixed value 2 instead of not
necessarily matching MB_CUR_MAX.
(__eucjp_wctomb): Use 3 instead of MB_CUR_MAX.
(sys_cp_wcstombs): Remove special case for "C" locale.
(sys_wcstombs): Implement here. Use internal locale data stored on
cygheap.
(sys_cp_mbstowcs): Remove special case for "C" locale.
(sys_mbstowcs): Implement here. Use internal locale data stored on
cygheap.
* syscalls.cc (internal_setlocale): New function to set cygheap locale
data and to reset CWD posix path.
(setlocale): Just call internal_setlocale from here if necessary.
* wchar.h (__ascii_wctomb): Declare.
(sys_wcstombs): Don't define inline, just declare.
(sys_mbstowcs): Ditto.
(fhandler_console::write_replacement_char): Declare as inline.
(fhandler_console::write_console): Declare new function.
* fhandler_console.cc (fhandler_console::MAX_WRITE_CHARS): Define.
(handler_console::write_console): Define.
(fhandler_console::write_replacement_char): Define as inline.
(fhandler_console::write_normal): Use write_console when writing buffers of
unknown length.
and con_charset.
(dev_console::str_to_con): Take mbtowc function pointer and charset
as additional parameters.
* fhandler_console.cc (fhandler_console::get_tty_stuff): Initialize
aforementioned new members. Explain why.
(dev_console::con_to_str): Remove useless comment. Call new
sys_cp_wcstombs function rather than sys_wcstombs.
(dev_console::str_to_con): Take mbtowc function pointer and charset
as additional parameters. Call sys_cp_mbstowcs accordingly.
(fhandler_console::write_normal): Only initialize f_mbtowc and charset
once. Accommodate changed str_to_con.
* strfuncs.cc (sys_cp_wcstombs): Renamed from sys_wcstombs. Take
wctomb function pointer and charset as parameters. Use throughout.
(sys_cp_mbstowcs): Take wctomb function pointer and charset as
parameters instead of codepage. Remove matching local variables and
their initialization.
* wchar.h (ENCODING_LEN): Define as in newlib.
(__mbtowc): Use mbtowc_p typedef for declaration.
(wctomb_f): New type.
(wctomb_p): New type.
(__wctomb): Declare.
(__utf8_wctomb): Use wctomb_f typedef for declaration.
(sys_cp_wcstombs): Move declaration from winsup.h here.
(sys_wcstombs): Ditto.
(sys_wcstombs_alloc): Ditto.
(sys_cp_mbstowcs): Ditto.
(sys_mbstowcs): Ditto.
(sys_mbstowcs_alloc): Ditto.
* winsup.h: Move declaration of sys_FOO functions to wchar.h. Include
wchar.h instead.
(__ctype_default): New character class array for default ASCII
character set.
(__ctype_iso): New array of character class array for ISO charsets.
(__ctype_cp): Ditto for singlebyte Windows codepages.
(tolower): Implement as distinct function to support any singlebyte
charset.
(toupper): Ditto.
(__set_ctype): New function to copy singlebyte character classes
corresponding to current charset to ctype_b array.
Align copyright text to upstream.
* dcrt0.cc (dll_crt0_1): Reset current locale to "C" per POSIX.
* environ.cc (set_file_api_mode): Remove.
(codepage_init): Remove.
(parse_thing): Remove "codepage" setting.
(environ_init): Set locale according to environment settings, or
to current codepage, before converting environment to multibyte.
* fhandler.h (fhandler_console::write_replacement_char): Drop argument.
* fhandler_console.cc (dev_console::str_to_con): Call sys_cp_mbstowcs
rather than MultiByteToWideChar.
(fhandler_console::write_replacement_char): Always print a funny
half filled square if a character isn't in the current charset.
(fhandler_console::write_normal): Convert to using __mbtowc
rather than next_char.
* fork.cc (frok::child): Drop call to set_file_api_mode.
* globals.cc (enum codepage_type) Remove.
(current_codepage): Remove.
* miscfuncs.cc (cygwin_wcslwr): Unused, dangerous. Remove.
(cygwin_wcsupr): Ditto.
(is_cp_multibyte): Remove.
(next_char): Remove.
* miscfuncs.h (is_cp_multibyte): Drop declaration.
(next_char): Ditto.
* strfuncs.cc (get_cp): Remove.
(__db_wctomb): New function to implement _wctomb_r functionality for
doublebyte charsets using WideCharToMultiByte.
(__sjis_wctomb): New function to replace unusable newlib function.
(__jis_wctomb): Ditto.
(__eucjp_wctomb): Ditto.
(__gbk_wctomb): New function.
(__kr_wctomb): Ditto.
(__big5_wctomb): Ditto.
(__db_mbtowc): New function to implement _mbtowc_r functionality for
doublebyte charsets using MultiByteToWideChar.
(__sjis_mbtowc): New function to replace unusable newlib function.
(__jis_mbtowc): Ditto.
(__eucjp_mbtowc): Ditto.
(__gbk_mbtowc): New function.
(__kr_mbtowc): New function
(__big5_mbtowc): New function
(__set_charset_from_codepage): New function.
(sys_wcstombs): Reimplement, basically using same wide char to multibyte
conversion as newlib's application level functions. Plus extras.
Add lengthy comment to explain. Change return type to size_t.
(sys_wcstombs_alloc): Just use sys_wcstombs. Change return type to
size_t.
(sys_cp_mbstowcs): Replace sys_mbstowcs, take additional codepage
argument. Explain why. Change return type to size_t.
(sys_mbstowcs_alloc): Just use sys_mbstowcs. Change return type to
size_t.
* wchar.h: Declare internal functions implemented in strfuncs.cc.
(wcscasecmp): Remove.
(wcsncasecmp): Remove.
(wcslwr): Remove.
(wcsupr): Remove.
* winsup.h (codepage_init): Remove declaration.
(get_cp): Ditto.
(sys_wcstombs): Align declaration to new implementation.
(sys_wcstombs_alloc): Ditto.
(sys_cp_mbstowcs): Add declaration.
(sys_mbstowcs): Define as inline function.
(sys_mbstowcs_alloc): Align declaration to new implementation.
(set_file_api_mode): Remove declaration.
* include/ctype.h (isblank): Redefine to use _B character class.
(toupper): Remove ASCII-only definition.
(tolower): Ditto.
* dtable.cc (handle_to_fn): Ditto.
* fhandler_console.cc (fhandler_console::read): Ditto.
(fhandler_console::scroll_screen): Ditto.
(dev_console::set_color): Ditto.
* fhandler_dsp.cc (fhandler_dev_dsp::write): Ditto.
(fhandler_dev_dsp::read): Ditto.
* fhandler_tape.cc (mtinfo_drive::get_status): Ditto.
* hookapi.cc (find_first_notloaded_dll): Ditto.
* mmap.cc (msync): Ditto.
* pipe.cc (pipesync::pipesync): Ditto.
* sec_acl.cc (getace): Ditto.
* sec_auth.cc (create_token): Ditto.
(lsaauth): Ditto.
* select.cc (peek_pipe): Ditto.
* spawn.cc (av::fixup): Ditto.
* syscalls.cc (popen): Ditto.
* tty.cc (tty::init_session): Ditto.
* uinfo.cc (pwdgrp::load): Ditto.
* fhandler.cc (fhandler_base::setup_overlapped): Ditto.
(fhandler_base::wait_overlapped): Rename second use of res variable to wres or
errors are not returned correctly.
* dcrt0.cc: Remove obsolete variable.
* dll_init.cc (release_upto): Fix typo involving incorrect use of '|'.
* fhandler_disk_file.cc (fhandler_base::fstat_by_handle): Avoid a compiler
warning regarding coercing type-punned variables.
(fhandler_base::fstat_by_name): Ditto. fhandler_fifo.cc
(fhandler_fifo::open_nonserver): Fix = vs. == typo.
(fhandler_fifo::wait): Add all conditions to switch statement to avoid a
compiler warning.
* fhandler_process.cc: Avoid unneeded initialization of variables to zero.
(fhandler_socket::listen): Add braces around initializer.
* flock.cc (inode_t::get_all_locks_list): Reorganize to avoid a compiler
warning. Fix problem with EWOULDBLOCK error return.
* path.cc (GUID_shortcut): Use braces around struct initializer.
(cygwin_conv_path): Reorganize to avoid a compiler warning.
* random.cc (dummy): Mark variable as volatile to avoid a "used uninitialized"
warning.
* libc/getopt.c: Mark some variables as dllexport although gcc doesn't seem to
do the right thing with them.
* libc/minires-os-if.c (get_registry_dns_items): Coerce some function arguments
to avoid a compiler warning.
* fhandler_console.cc (set_console_state_for_spawn): Remove.
(fhandler_console::open): Set console state last. Don't set
ENABLE_PROCESSED_INPUT flag.
* spawn.cc (spawn_guts): Drop call to set_console_state_for_spawn.
* fhandler_console.cc (dev_console::con_to_str): Return number of
multibyte char bytes.
(fhandler_console::read): Set nread to number of multibyte char bytes
returned from con_to_str.
(fhandler_console::write_normal): Reorder trunc buffer preocessing.
Return after writing valid multibyte sequence out of trunc buffer.
Change comments slightly.
* autoload.cc (CreateDesktopW): Replace CreateDesktopA.
(CreateWindowStationW): Replace CreateWindowStationA.
(GetUserObjectInformationW): Replace GetUserObjectInformationA.
* cygheap.h (cwdstuff::get): Assume default buffer size NT_MAX_PATH.
* cygtls.cc (_cygtls::remove): Free temporary TLS path buffers.
* cygtls.h (TP_NUM_C_BUFS): Define.
(TP_NUM_W_BUFS): Define.
(class tls_pathbuf): New class to store pointers to thread local
temporary path buffers.
(_local_storage::pathbufs): New member.
* environ.cc (win_env::add_cache): Use temporary TLS path buffer instead
of stack based buffer.
(posify): Get temporary outenv buffer from calling function.
(environ_init): Create temporary TLS path buffer for posify.
(build_env): Create Windows environment block as WCHAR buffer.
* environ.h (build_env): Change declaration accordingly.
* external.cc (sync_winenv): Accommodate build_env change.
* fhandler_console.cc (fhandler_console::need_invisible): Use
GetUserObjectInformationW and CreateWindowStationW.
* fhandler_process.cc (format_process_maps): Use temporary TLS path
buffer instead of stack based buffer.
* fork.cc (frok::parent): Convert to use CreateProcessW.
* path.cc: Throughout use temporary TLS path buffers instead of stack
based buffer. Replace checks for CYG_MAX_PATH by checks for
NT_MAX_PATH.
(getfileattr): New function to replace GetFileAttributesA.
(normalize_win32_path): Remove Win32 and NT long path prefixes.
(getwd): Assume PATH_MAX + 1 buffer per SUSv3.
* path.h (class path_conv): Set path buffer to size NT_MAX_PATH.
(iswdrive): Define.
* pinfo.cc (commune_process): Use temporary TLS path buffer instead of
stack based buffer.
* registry.cc (get_registry_hive_path): Ditto.
(load_registry_hive): Ditto.
* spawn.cc (spawn_guts): Convert to use CreateProcessW and
CreateProcessAsUserW.
(av::fixup): Open/close file using NtOpenFile/NtClose.
* syscalls.cc (mknod_worker): Allow PATH_MAX file name.
(mknod32): Ditto.
(getusershell): Ditto.
* tls_pbuf.cc: New file implementing tls_pathbuf and tmp_pathbuf
methods.
* tls_pbuf.h: New header for files using tmp_pathbuf.
* tlsoffsets.h: Regenerate.
* winsup.h (NT_MAX_PATH): Define as 32767 to avoid USHORT overflow.
truncated multibyte characters on input.
(fhandler_console::write_replacement_char): Declare new method.
* fhandler_console.cc (CONVERT_LIMIT): Raise to 64K.
(fhandler_console::fhandler_console): Initialize trunc_buf.
(ERR): Define as independent value again.
(fhandler_console::write_replacement_char): New method to print
replacement chars.
(fhandler_console::write_normal): Add handling for truncated multibyte
sequences. Call next_char instead of pathetic CharNextExA function.
Don't change src, rather just work with found later on.
* miscfuncs.cc (is_cp_multibyte): Move here from strfuncs.cc.
Don't call Windows function, restrict to well-known ANSI/OEM codepages
and UTF-8.
(next_char): Call CharNextExA only for doublebyte codepages.
Implement for UTF-8 here.
* strfuncs.cc (is_cp_multibyte): Move to miscfuncs.cc.
* winsup.h (next_char): Declare.
* include/limits.h (MB_LEN_MAX): Set to maximum value of MB_CUR_MAX
as defined by newlib for now.
(CharNextExA): Define.
* environ.cc (codepage_init): Un-static. Set active_codepage to
active codepage. Default to ansi regardless of buf pointer.
* fhandler.h (dev_console::get_console_cp): New method.
(dev_console::con_to_str): Change declaration according to new
implementation.
(dev_console::str_to_con): Ditto.
* fhandler_console.cc (cp_convert): Remove.
(dev_console::con_to_str): Redefine to take WCHAR as incoming console
char.
(dev_console::get_console_cp): Return correct codepage according to
alternate_charset_active setting.
(dev_console::str_to_con): Redefine to create WCHAR buffer for console
output.
(fhandler_console::read): Read console input as WCHARs.
(base_chars): Fix typo in comment.
(fhandler_console::char_command): Save and restore console output
buffer using UNICODE functions.
(fhandler_console::write_normal): Convert to write output in UNICODE.
Use CharNextExA to recognize multibyte characters in input. Workaround
problem with UTF-8 and MultiByteToWideChar. Simplify the loop for
printing "normal" characters.
* strfuncs.cc (active_codepage): New variable to store active codepage.
(get_cp): Call codepage_init() if active_codepage is uninitialized.
Just return active_codepage.
(is_cp_multibyte): New function.
* winsup.h (active_codepage): Declare.
(codepage_init): Declare.
(is_cp_multibyte): Declare.
codepage.
* environ.cc (set_file_api_mode): Always set file api to ANSI if not
using the OEM codepage.
(codepage_init): Allow "utf8" codepage.
* fhandler_clipboard.cc (set_clipboard): Convert clipbuf to void and
cast as needed. Always convert input to wide char and write
CF_UNICODETEXT to clipboard.
(fhandler_dev_clipboard::read): Read CF_UNICODETEXT from clipboard and
convert to current codepage if CYGWIN_NATIVE format is not available.
* fhandler_console.cc: Drop redundant undef.
* smallprint.cc (__small_vsprintf): Convert PWCHAR and UNICODE_STRING
to current codepage for printing.
* strfuncs.cc: Use PWCHAR throughout.
(get_cp): Return CP_UTF8 for utf8_cp codepage setting.
(sys_wcstombs): Allow NULL target buffer.
(sys_wcstombs_alloc): New function.
(sys_mbstowcs_alloc): Ditto.
* winsup.h (codepage_type): Add utf8_cp.
(HEAP_NOTHEAP): Define.
(sys_wcstombs_alloc): Declare.
(sys_mbstowcs_alloc): Declare.
current meta key mode.
* fhandler_console.cc (fhandler_console::read): Set the top bit of
the character if metabit is true.
* fhandler_console.cc (fhandler_console::ioctl): Implement
KDGKBMETA and KDSKBMETA commands.
* fhandler_tty.cc (process_ioctl): Support KDSKBMETA.
(fhandler_tty_slave::ioctl): Send KDGKBMETA and KDSKBMETA to the
master.
* include/cygwin/kd.h: New file for the meta key mode.
* include/sys/kd.h: New file.
(dll_crt0_1): Reflect renaming from tty_init to tty::init_session.
(do_exit): Reflect moving of tty_terminate into tty_list.
* exceptions.cc (events_init): Move tty_mutex stuff elsewhere.
* fhandler_console.cc (set_console_title): Use lock_ttys class.
* fhandler_termios.cc (fhandler_termios::bg_check): Make debug output more
accurate.
* fhandler_tty.cc (fhandler_tty_slave::open): Reflect move of attach_tty into
tty_list class. Don't attempt to grab master end of pty if master doesn't
exist.
(fhandler_pty_master::open): Reflect move of allocate_tty into tty_list class.
Use lock_ttys::release to release mutex. Improve debugging output.
(fhandler_pty_master::setup): Remove if 0'ed block. Fix argument to
SetNamedPipeHandleState.
* pinfo.cc (_pinfo::set_ctty): Lock ttys before setting sid/pgid. Improve
debugging. Add temporary debugging.
* tty.cc (tty_list::init_session): New function.
(tty::init_session): Rename from tty_init. Reflect move of attach_tty to
tty_list class.
(tty::create_master): Rename from create_tty_master.
(tty_list::attach): Rename from attach_tty. Reflect renaming of connect_tty to
connect. Ditto for allocate_tty.
(tty_terminate): Delete.
(tty_list::terminate): Subsume tty_terminate. Use lock_ttys rather than
manipulating mutex directly.
(tty_list::allocate): Rename from allocate_tty. Use lock_ttys rather than
manipulating mutex directly. Don't set sid here since linux apparently doesn't
do this. Reflect move of create_tty_master into tty.
(lock_ttys::lock_ttys): Define new constructor.
(lock_ttys::release): New function.
* tty.h (tty::exists): Return false immediately if !master_pid.
(tty::set_master_closed): Define new function.
(tty::create_master): Ditto.
(tty::init_session): Ditto.
(tty_list::mutex): New field.
(tty_list::allocate): Define new function.
(tty_list::connect): Ditto.
(tty_list::attach): Ditto.
(tty_list::init_session): Ditto.
(lock_ttys): New class.
(tty_init): Delete declaration.
(tty_terminate): Ditto.
(attach_tty): Ditto.
(create_tty_master): Ditto.
(tty::gethwnd): Ditto.
(tty::sethwnd): Ditto.
(tty_min::hwnd): Receive variable from tty class.
(tty_min::gethwnd): Receive function from tty classs.
(tty_min::sethwnd): Ditto.
* dtable.cc (dtable::stdio_init): Only call init_console_handler when we
actually own the console.
* fhandler_console.cc (fhandler_console::get_tty_stuff): Set tty's hwnd to
non-zero value.
* fhandler_termios.cc (fhandler_termios::tcsetpgrp): Semi-reinstate handling of
console when pgrp is set.
on/off depending on whether we have allocated a console or not.
* dcrt0.cc (child_info_fork::fork_retry): Add more potential retry statuses.
(dll_crt0_0): Turn on/off console control depending on whether we have a
controlling tty or not.
* exceptions.cc (init_console_handler): Change BOOL to bool.
* fhandler_console.cc (fhandler_console::need_invisible): Cosmetic change.
* winsup.h (init_console_handler): Reflect argument type change.
* wincap.h (supports_setconsolectrlhandler_null): Remove duplicate capability
throughout.
* wincap.cc: Ditto.
bool.
* spawn.cc (spawn_guts): Ditto, i.e., once again call
set_console_state_for_spawn with an indication of whether we're about to start
a cygwin process.
* fhandler_console.cc (set_console_state_for_spawn): Don't set the console
state if we know we're starting a cygwin process or if we're using a "real"
tty.
declaration.
* fhandler.cc (set_console_state_for_spawn): Eliminate argument from
definition. Always check for invisible console.
(fhandler_console::need_invisible): Don't do anything if the windows station is
already not visible.
* spawn.cc (spawn_guts): Accommodate change of argument to
set_console_state_for_spawn.
* sigproc.cc (sigproc_init): Move clearing of sync_startup here to lessen the
likelihood of trying to deal with non-cygwin threads in dll_entry.
* fhandler_console: Fix set_console_state_for_spawn comment.
syscall_printf.
* fhandler_console.cc (fhandler_console::need_invisible): Use made-up name for
windows station rather than asking Windows to create one for us.
* spawn.cc (spawn_guts): Don't mess with console if we're detaching.
* fhandler_console.cc (beep): Use a more Windows-generic wav file if the beep
is missing. Use a more foolproof way to find out whether we should be
recreating the missing key.
* registry.h (reg_key::_disposition): New field.
(reg_key::created): New function.
* registry.cc (reg_key::reg_key): Set _disposition to zero by default.
(reg_key::build_key): Fill in _disposition field.
* fhandler_console.cc (set_console_state_for_spawn): Ditto for the definition.
Only set invisible console for non-cygwin process. Remove debugging leftover.
* spawn.cc (spawn_guts): Pass argument denoting whether this is a cygwin
process to set_console_state_for_spawn and only call this function when
exec'ing.
(fhandler_console::invisible_console): Declare new variable.
(fhandler_console::need_invisible): Ditto.
(fhandler_console::has_a): Ditto.
* fhandler_console.cc (set_console_state_for_spawn): Eliminate return value.
Set up an invisible console if necessary prior to spawning.
(fhandler_console::invisible_console): Define.
* fhandler_tty.cc (fhandler_tty_slave::open): Use
fhandler_console::invisible_console to setup an invisible console.
* pipe.cc (fhandler_pipe::fixup_in_child): Define new function from
fixup_after_exec.
(fhandler_pipe::fixup_after_exec): Use fixup_in_child when appropriate.
(fhandler_pipe::fixup_after_fork): Ditto.
* spawn.cc (handle): Reorganize and modernize a little.
(spawn_guts): Rely on set_console_state_for_spawn to set the console into the
right state but don't create the process with "detached" flag if we have no
controlling tty since that confuses 'cmd'.
* dtable.cc (dtable::stdio_init): Don't set console as controlling terminal if
we have an invisible console.
* sigproc.cc (child_info::sync): Use correct name in ForceCloseHandle1.
bool parameter.
(fhandler_console::fixup_after_exec): Accommodate fixup_after_fork_exec's
parameter.
(fhandler_console::fixup_after_fork): Ditto.
* fhandler_console.cc (fhandler_console::fixup_after_fork_exec): Avoid opening
new console only when close_on_exec AND execing.
(fhandler_console::fixup_after_fork): Use fixup_after_fork_exec.
(fhandler_console::fixup_after_exec): Ditto.
* fhandler_console.cc (fhandler_console::fixup_after_fork): Delete definition.
(fhandler_console::fixup_after_fork_exec): Rename from fixup_after_exec.
* pinfo.cc (_pinfo::set_ctty): Don't play with console count here.
* syscalls.cc (close_all_files): Don't close cygheap ctty if hExeced since the
child will be copying information from us.
(setsid): Use myctty() rather than raw ctty #.
(init_cygheap::console_count): Renamed from open_fhs. Make private.
* cygheap.cc (init_cygheap::manage_console_count): Define new function.
* dtable.cc (dtable::fixup_after_exec): Always call fixup_after_exec on
elements of fd even when they are about to be closed.
* fhandler.h (report_tty_counts): Remove open_fhs from debugging output.
* fhandler_console.cc (fhandler_console::open): Use manage_console_count rather
than manipulating count directly.
(fhandler_console::close): Ditto.
(fhandler_console::fixup_after_fork): Ditto.
(fhandler_console::fixup_after_exec): Ditto. Don't close handles if
close_on_exec.
* fhandler_tty.cc (fhandler_tty_slave::open): Use manage_console_count() rather
than manipulating count directly. Reflect change in arguments to
report_tty_counts().
(fhandler_tty_slave::close): Ditto for both.
(fhandler_tty_slave::dup): Ditto for both.
(fhandler_tty_slave::ioctl): Use myctty() rather than raw ctty #.
(fhandler_tty_slave::fixup_after_fork): Reflect change in arguments to
report_tty_counts().
(fhandler_tty_master::init_console): Use manage_console_count() rather than
manipulating count directly.
* fhandler_clipboard.cc (fhandler_dev_clipboard::fixup_after_exec): Don't
perform any operations if close_on_exec.
* fhandler_dsp.cc (fhandler_dev_dsp::fixup_after_exec): Ditto.
* fhandler_raw.cc (fhandler_dev_raw::fixup_after_exec): Ditto.
* fhandler_serial.cc (fhandler_serial::fixup_after_exec): Ditto.
* pinfo.h (_pinfo::_ctty): Declare new function.
(myctty): Declare new macro.
(__ctty): Declare new macro.
* pinfo.cc (_pinfo::_ctty): Define new function.
(_pinfo::set_ctty): Use manage_console_count() rather than manipulating count
directly.
* signal.cc (kill_pgrp): Use myctty() and __ctty() macros rather than raw ctty
#.
* syscalls.cc (setsid): Ditto. Use manage_console_count() rather than
manipulating count directly.
eof_detected status flag. Delete is_eom and is_eof methods.
Move drive_size, bytes_per_sector, eom_detected status flag, as well
as the methods read_file, write_file, raw_read and raw_write to ...
(class fhandler_dev_floppy): ... here. Remove is_eom and is_eof
methods. Add dup method.
* fhandler_floppy.cc (IS_EOM): New macro.
(fhandler_dev_floppy::is_eom): Remove.
(fhandler_dev_floppy::is_eof): Remove.
(fhandler_dev_floppy::fhandler_dev_floppy): Initialize status flags.
(fhandler_dev_floppy::get_drive_info): Only call EX functions on
systems supporting them and stop suffering strange delays.
(fhandler_dev_floppy::read_file): Move here, drop setting
current_position.
(fhandler_dev_floppy::write_file): Move here, drop setting
current_position.
(fhandler_dev_floppy::open): Rearrange comment.
(fhandler_dev_floppy::dup): New method.
(fhandler_dev_floppy::get_current_position): New inline method. Use
instead of former current_position were appropriate.
(fhandler_dev_floppy::raw_read): Move here. Drop EOF handling.
(fhandler_dev_floppy::raw_write): Move here. Drop EOF handling.
(fhandler_dev_floppy::lseek): Remove useless conditions. Convert
sector_aligned_offset to LARGE_INTEGER to improve SetFilePointer call.
(fhandler_dev_floppy::ioctl): Move blocksize check in RDSETBLK case
to here.
* fhandler_raw.cc (fhandler_dev_raw::is_eom): Remove.
(fhandler_dev_raw::is_eof): Remove.
(fhandler_dev_raw::write_file): Remove.
(fhandler_dev_raw::read_file): Remove.
(fhandler_dev_raw::raw_read): Remove.
(fhandler_dev_raw::raw_write): Remove.
(fhandler_dev_raw::dup): Drop copying removed members.
(fhandler_dev_raw::ioctl): Drop blocksize testing.
* wincap.h: Implement has_disk_ex_ioctls throughout.
* wincap.cc: Ditto.
(wincap_vista): Preliminary wincaps for Windows Vista/Longhorn.
(wincapc::init): Add Vista/Longhorn handling.
appropriately.
* pinfo.cc (pinfo::exit): Always call sigproc_terminate here. Rely on
sigproc_terminate to signal signal thread to handle eventual process exit.
* sigproc.cc (no_signals_available): Change criteria for determining if this
process can handle signals to itself.
(my_sendsig): New variable. Copy of my sendsig handle.
(proc_can_be_signalled): Don't send signals if exit code is set.
(sigproc_terminate): Use and set exit_state appropriately to determine when to
do anything. Send __SIGEXIT to self to control process exit.
(sig_send): Use my_sendsig for sending signals. Don't call
proc_can_be_signalled for myself since the criteria is now different for
sending signals to myself.
(wait_sig): Copy myself->sendsig to my_sendsig for future use. Exit signal
loop when __SIGEXIT is received. Wait for main thread to exit and use its exit
status to actually exit process.
* sigproc.h (__SIGEXIT): New enum.
* dcrt0.cc (alloc_stack): Eliminate superfluous "return;".
* debug.cc (add_handle): Ditto.
* devices.in (device::parse): Ditto.
* dtable.cc (dtable::vfork_parent_restore): Ditto.
(dtable::vfork_child_fixup): Ditto.
* environ.cc (parse_options): Ditto.
* errno.cc (seterrno_from_win_error): Ditto.
* exceptions.cc (sig_handle_tty_stop): Ditto.
(set_signal_mask): Ditto.
* fhandler.cc (fhandler_base::read): Ditto.
(fhandler_base::operator delete): Ditto.
(fhandler_base::seekdir): Ditto.
(fhandler_base::rewinddir): Ditto.
* fhandler_console.cc (fhandler_console::read): Ditto.
(fhandler_console::fixup_after_exec): Ditto.
* sigproc.cc (sigproc_init): Ditto.
(sigproc_terminate): Ditto.
* devices.cc: Regenerate.
collision with large data areas.
* fhandler_console.cc (fhandler_console::get_tty_stuff): Accommodate changes to
open_shared arguments.
* fhandler_tape.cc (mtinfo_init): Ditto.
* pinfo.cc (pinfo::init): Use open_shared rather than win32 mmap calls.
* shared.cc (user_shared_initialize): Ditto.
(memory_init): Ditto.
(open_shared): Change to allow use a smore general mmap handler.
* shared_info.h (shared_locations): Add SH_JUSTCREATE, SH_JUSTOPEN.
(open_shared): Change declaration to match new usage.
* autoload.cc (LoadDLLfuncEx2): Define in terms of LoadDLLfuncEx3.
(LoadDLLfuncEx3): New macro.
(dev_console::set_default_attr): Ditto, moved from fhandler_console.
(dev_console::fillin_info): Ditto. Accommodate this change throughout this
file.
(fhandler_console::get_win32_attr): Eliminate.
* fhandler_console.cc (fhandler_console::get_tty_stuff): Properly set default
attributes on initialization.
(fhandler_console::open): Set current attributes rather than default color on
open.
(fhandler_console::get_win32_attr): Eliminate.
(dev_console::set_color): New function. Move get_win32_attr stuff here.
(dev_console::set_default_attr): New function, moved from fhandler_console.
(dev_console::fillin_info): Ditto.
(fhandler_console::char_command): Call set_color to set screen characteristics.
* dcrt0.cc (dll_crt0_0): Remove hexec_proc stuff.
* fork.cc (fork_child): Remove call to pinfo_fixup_after_fork.
* pinfo.cc (set_myself): Close and zero pid_handle if set.
(pinfo_fixup_after_fork): Delete.
(proc_waiter): Don't close vchild.hProcess here. Do that when we are remove
the vchild from procs. Save hProcess as pid_handle only on first reparent
operation.
(pinfo::wait): Don't set pid_handle here.
(pinfo::alert_parent): Always try to send signal. If unsuccessful then close
and zero wr_proc_pipe.
* pinfo.h (pinfo::pinfo): Make sure that appropriate parts of the class are
zeroed on construction.
(pinfo::alert_parent): Take char argument.
(pinfo_fixup_after_fork): Delete declaration.
(hexec_proc): Ditto.
* sigproc.cc (remove_proc): Close pid_handle and hProcess if appropriate.
* spawn.cc (spawn_guts): Set cygheap->pid_handle on first exec.
* cygheap.h (init_cygheap::pid_handle): New element.
* pinfo.cc (set_myself): Clear previously existing cygheap->pid_handle when a
new process has been started.
(pinfo::wait): Make sure that a handle to the newly forked/spawned process is
kept around so that the pid will not be reused.
* pinfo.h (_pinfo::pid_handle): Move.
(pinfo::pid_handle): to here.
* spawn.cc (spawn_guts): Create a pid_handle in cygheap prior to spawning to
ensure that the pid does not get reused during the lifetime of the "cygwin
pid".
* pinfo.h (pinfo::alert_parent): New function.
* exceptions.cc (sig_handle_tty_stop): Use alert_parent to send "signals" to
parent.
* fork.cc (fork_parent): Don't close pi.hProcess. Let the waiter thread do
that.
* pinfo.cc (proc_waiter): Detect case where process exits without setting the
exit code and use value from GetExitCodeProcess. Reluctantly implement
__SIGREPARENT.
(pinfo::alert_parent): Define.
* sigproc.h (__SIGREPARENT): New enum.
* spawn.cc (spawn_guts): Send reparent signal to parent on exec. Always create
process in suspended state to avoid races. Remove cygthread.h in favor of
cygtls.h throughout since cygtls now includes cygthread.h. Eliminate
ppid_handle usage throughout.
* child_info.h: Regenerate magic number
(child_info): Remove pppid_handle.
* cygthread.h (cygthread::release): New method. Frees thread without waiting.
* cygthread.cc (cygthread::stub): Set _ctinfo in _mytls to point to information
for executing thread. Don't call SetEvent if thread is no longer in use.
(cygthread::simplestub): Ditto.
* cygtls.h (_cygtls::_ctinfo): New element contains pointer to information
about executing cygthread, if any.
* dcrt0.cc: Remove last vestiges of per_thread stuff.
(dll_crt0_0): Ditto. Remove accommodation for ppid_handle.
(do_exit): Remove obsolete reparenting test.
(_exit): Exit with a more SUSv3-like exit value.
* dtable.cc (dtable::stdio_init): Check for myself->cygstarted rather than
myself->ppid_handle to see if we were started by a cygwin process.
* exceptions.cc (open_stackdumpfile): Ditto.
(handle_exceptions): Ditto.
(ctrl_c_handler): Ditto.
(sig_handle_tty_stop): Ditto. Let parent send signal to itself on STOP.
(sigpacket::process): Comment out vfork test.
(signal_exit): Use more SUSv3-like exit value on signal.
* external.cc (fillout_pinfo): Don't set hProcess.
* fork.cc: Remove VFORK cruft.
(per_thread::set): Delete.
(fork_child): Remove perthread stuff.
(fork_parent): Remove obsolete subproc_init. Accommodate new method for
tracking subprocesses.
* pinfo.cc (set_myself): Accommodate new pinfo/_pinfo layout. Set some things
here that used to be set in wait_sig.
(_pinfo::exit): Set exitcode here. Close process pipe.
(_pinfo::commune_send): Accommodeate new pinfo/_pinfo layout.
(proc_waiter): New function. Waits, in a thread for subprocess to go away.
(pinfo::wait): New function. Initialization for proc_waiter.
* pinfo.h (_pinfo::exitcode): New element.
(_pinfo::cygstarted): Ditto.
(_pinfo::wr_proc_pipe): Ditto.
(_pinfo::ppid_handle): Delete.
(_pinfo::hProcess): Delete.
(_pinfo::lock): Delete.
(pinfo::hProcess): New element.
(pinfo::lock): Ditto.
(pinfo::wait): Declare new function.
(pinfo::preserve): Define new function.
* sigproc.cc: Remove old stuff from wait_subproc thread based method.
(zombies): Remove.
(procs): New.
(my_parent_is_alive): Just check that the parent pid exists.
(mychild): Just use pinfo methods to determine if child is mine.
(proc_subproc): Revamp PROC_ADDCHILD to use pinfo::wait. Remove
PROC_CHILDTERMINATED logic. Use different method to remove processes from list
when SIGCHLD == SIG_IGN.
(proc_terminate): Gut.
(subproc_init): Delete.
(init_child_info): Remove setting of pppid_handle.
(checkstate): Revamp to only scan procs array.
(remove_proc): Rename from remove_zombie. Don't close hProcess or pid_handle.
Don't release memory if it's myself.
(stopped_or_terminated): Change logic to handle new consolidated proc/zombie
array.
(wait_subproc): Delete.
* sigproc.h: Remove obsolete EXIT_* defines.
(subproc_init): Remove declaration.
* spawn.cc (spawn_guts): Remove reparenting stuff. Use standard wait logic to
wait for child if started from a non-cygwin process.
* tlsoffsets.h: Regenerate.
* tty.cc (tty_init): Check for myself->cygstarted rather than
myself->ppid_handle to see if we were started by a cygwin process.
* include/sys/signal.h (external_pinfo::exitcode): Replace hProcess.
* include/sys/wait.h (WCOREDUMP): Define.
* fhandler_tty.cc (fhandler_tty_slave::read): Add debugging output for timeout
case.
* signal.cc (abort): Flag that we are exiting with the ABORT signal.
* tty.h (tty_list::allocate_tty): Turn argument into a boolean.
* tty.cc (tty_list::init): Protect entire allocation operation with tty_mutex
(formerly title_mutex) to protect against allocation races.
* cygthread.h (cygthread::is): Eliminate declaratin.
* fhandler_console.cc (fhandler_console::read): Only wait for signal_arrived in
the main thread.
* fhandler_socket.cc: Include new "wininfo.h".
(fhandler_socket::ioctl): Use 'winmsg' rather than 'gethwnd()'.
* sync.cc (muto::grab): Define new function.
(muto::acquire): Use tls pointer rather than tid.
(muto::acquired): Ditto.
(muto::reset): Delete.
(muto::release): Ditto. Also implement "close on last release".
* sync.h (muto::tid): Delete.
(muto::tls): New field.
(muto::ismine): Delete.
(muto::owner): Delete.
(muto::unstable): Delete.
(muto::reset): Delete.
(muto::upforgrabs): New method.
(muto::grab): Ditto.
(new_muto_name): New define.
* wininfo.h: New file.
(wininfo): New class.
* window.cc: Rework throughout to use winfo class for controlling invisible
window operation.
(gethwnd): Delete definition.
* winsup.h (gethwnd): Delete declaration.
tty_min, mtinfo and fs_info thoroughout.
* fhandler.h: Redefine all set_close_on_exec methods to take a bool
argument.
(enum conn_state): Rename from connect_state.
(class fhandler_base): Rename some status flags to align with
accessor method names. Drop encoded flag entirely. Unify status
accessor methods. Const'ify all read accessor methods.
(class fhandler_socket): Ditto.
(class fhandler_dev_raw): Ditto.
* fhandler_disk_file.cc (fhandler_base::fstat_fs): Use fs.fs_is_fat()
instead of evaluating FATness of file system here.
(fhandler_disk_file::opendir): Drop call to set_encoded().
(fhandler_disk_file::readdir): Use pc.isencoded() directly.
* mtinfo.h (class mtinfo_drive): Const'ify all read accessor methods.
* path.cc (fsinfo_cnt): Add.
(fs_info::update): Accomodate class changes. Evaluate file system
name specific flags right here. Add thread safety for reading and
writing global fsinfo array.
* path.h (enum path_types): Drop values for flags kept in fs already.
(struct fs_info): Move status informatin into private struct type
status_flags. Add accessor methods. Remove path and file system
name string arrays in favor of status bits.
(class path_conv): Use new fs_info status information where
appropriate.
(path_conf::fs_has_ea): Rename from fs_fast_ea.
(path_conf::fs_has_acls): New method.
(path_conf::root_dir): Remove.
(path_conf::volname): Remove.
* syscalls (statfs): Evaluate root dir locally.
* tty.h (class tty_min): Unify status accessor methods. Const'ify
all read accessor methods.
* fhandler_console.cc (fhandler_console::close): Fix debugging output.
(fhandler_console::fixup_after_fork): Decrement open_fhs prior to call to
fhandler_console::open since this would cause incrementing too much
incrementing in child processes. (Probably needs to be handled more elegantly
someday)
(fhandler_console::fixup_after_exec): Ditto.
this change throughout.
* dtable.cc (dtable::add_archetype): Use correct count when iterating through
*active* archetypes.
* dtable.cc (dtable::fixup_after_exec): Close handle if close_on_exec and
archetype exists since archetype currently does not set windows close-on-exec
flag (FIXME).
* fhandler_tty.cc (fhandler_tty_slave::open): Change debugging output slightly.
(fhandler_tty_slave::close): Ditto.
(fhandler_tty_slave::fixup_after_fork): Just report on inherited use counts
since since archetype currently does not set windows close-on-exec flag
(FIXME).
* pinfo.cc (_pinfo::set_ctty): Change debugging output slightly.
* cygheap.cc (cygheap_init): Remove open_fhs accommodation and use count
reporting.
* perthread.h (vfork_save::fhctty): New element.
* perthread.h (vfork_save::open_fhs): New element.
* fork.cc (vfork): Muck around with ctty and open_fhs stuff, both of which are
now saved in the vfork_save structure.
(init_cheap::ctty): Change to pointer.
* dtable.h (dtable::find_archetype): Declare new function.
(dtable::add_archetype): Declare new function.
(dtable::delete_archetype): Declare new function.
(dtable::narchetypes): Declare.
(dtable::farchetypes): Declare.
(dtable::initial_archetype_size): Declare.
(dtable::dtable): Initialize new fields.
(dtable::initial_archetype_size): Declare.
* dtable.cc (dtable::find_archetype): Define new function.
(dtable::add_archetype): Define new function.
(dtable::delete_archetype): Define new function.
(dtable::initial_archetype_size): Define.
* fhandler.h (fhandler_base::archetype): Declare.
(fhandler_base::usecount): Declare.
* fhandler.cc (fhandler_base::fhandler_base): Initialize new fields.
* fhandler_console.cc (fhandler_console::get_tty_stuff): Pass NULL to third
argument of set_ctty.
* fhandler_tty.cc (fhandler_tty_slave::open): Accommodate new archetype method
to create only one instance of a tty.
(fhandler_tty_slave::close): Don't close handles unless archetype usecount is
zero. When that happens, close archetype too.
(fhandler_tty_slave::dup): Just copy archetype. Set use count appropriately.
Set ctty, if appropriate.
(fhandler_tty_common::dup): Remove slave considerations.
(fhandler_tty_common::set_close_on_exec): Remove cygheap->ctty considerations.
* pinfo.cc (_pinfo::set_ctty): Accommodate new archetype methods.
* pinfo.h (_pinfo::set_ctty): Make third argument explicit.
* syscalls.cc (close_all_files): Decrement controlling tty use count before
closing all handles to allow controlling tty to be closed. Remove previous
controlling tty considerations.
throughout.
* tty.cc (tty::common_init): Remove call to SetKernelObjectSecurity and edit
some comments.
* cygheap.h (init_cygheap::ctty): Add new element.
* devices.in (device::parse): Remove special handling for /dev/tty.
* devices.cc: Regenerate.
* dtable.cc (build_fh_pc): Don't reset /dev/tty device. Let the device opener
do that.
* fhandler_termios.cc (tty_min::set_ctty): Redefine to _pinfo class.
* fhandler_tty.cc (fhandler_tty_common::set_close_on_exec): Avoid setting
noninherit flag for ctty.
* tty.h: Move BOOLs to bools.
(tty_min::set_ctty): Redeclare to _pinfo class.
* pinfo.cc (_pinfo::set_ctty): Define new function based on tty_min::set_ctty.
Change first argument from tty number to tty_min class.
* pinfo.h (_pinfo::set_ctty): Declare.
* fhandler_console.cc (fhandler_console::get_tty_stuff): Reflect move of
set_ctty to _pinfo class.
* fhandler_tty.cc (fhandler_tty_slave::open): Treat FH_TTY specially. Use
saved cygheap value if it exists. Otherwise convert to real device and save on
first time open.
(fhandler_tty_common::dup): Potentially set controlling tty if duping a slave
tty.
* syscalls.cc (setsid): Close controlling tty in cygheap.
* tty.cc: Change some BOOLs to bools.
CTRL and ALT keys at the time of the last keyboard input event.
(fhandler_console::ioctl): Handle requests to retrieve the keyboard modifiers
via the TIOCLINUX command.
* fhandler_tty.c (fhandler_tty_slave::read): Ditto.
* include/sys/termios.h (TIOCLINUX): New macro definition.
* devices.gperf: New file.
* devices.shilka: New file.
* cygwin-gperf: New file.
* cygwin-shilka: New file.
* fhandler_fifo.cc: New file.
* fhandler_nodevice.cc : New file. Reorganize headers so that path.h precedes
fhandler.h throughout. Remove device argument and unit arguments from fhandler
constructors throughout. Remove pc arguments to fhandler functions and use
internal pc element instead, throughout. Use dev element in pc throughout.
Use major/minor elements rather than units and device numbers previously in
fhandler class. Use correct methods for fhandler file names rather than
directly accessing file name variables, throughout.
* Makefile.in (DLL_OFILES): Add devices.o, fhandler_fifo.o
* dcrt0.cc (dll_crt0_1): Call device::init.
* devices.h: Renumber devices based on more Linux-like major/minor numbers.
Add more devices. Declare standard device storage.
(device): Declare struct.
* dir.cc (opendir): Use new 'build_fh_name' to construct a fhandler_* type.
* dtable.cc (dtable::get_debugger_info): Ditto.
(cygwin_attach_handle_to_fd): Ditto.
(dtable::release): Remove special FH_SOCKET case in favor of generic
"need_fixup_before" test.
(dtable::init_std_file_from_handle): Use either build_fh_dev or build_fh_name
to build standard fhandler.
(dtable::build_fh_name): Renamed from dtable::build_fhandler_from_name. Move
out of dtable class. Don't accept a path_conv argument. Just build it here
and pass it to:
(build_fh_pc): Renamed from dtable::build_fhandler. Move out of dtable class.
Use intrinsic device type in path_conv to create new fhandler.
(build_fh_dev): Renamed from dtable::build_fhandler. Move out of dtable class.
Simplify arguments to just take new 'device' type and a name. Just return
pointer to fhandler rather than trying to insert into dtable.
(dtable::dup_worker): Accommodate above build_fh name changes.
(dtable::find_fifo): New (currently broken) function.
(handle_to_fn): Use strechr for efficiency.
* dtable.h: Reflect above build_fh name changes and argument differences.
(fhandler_base *&operator []): Return self rather than copy of self.
* fhandler.cc (fhandler_base::operator =): Use pc element to set normalized
path.
(fhandler_base::set_name): Ditto.
(fhandler_base::raw_read): Use method to access name.
(fhandler_base::write): Correctly use get_output_handle rather than get_handle.
(handler_base::device_access_denied): New function.
(fhandler_base::open): Eliminate pc argument and use pc element of
fhandler_base throughout.
(fhandler_base::fstat): Detect if device is based in filesystem and use
fstat_fs to calculate stat, if so.
(fhandler_base::fhandler_base): Eliminate handling of file names and, instead,
just free appropriate component from pc.
(fhandler_base::opendir): Remove path_conv parameter.
* fhandler.h: Remove all device flags.
(fhandler_base::pc): New element.
(fhandler_base::set_name): Change argument to path_conv.
(fhandler_base::error): New function.
(fhandler_base::exists): New function.
(fhandler_base::pc_binmode): New function.
(fhandler_base::dev): New function.
(fhandler_base::open_fs): New function.
(fhandler_base::fstat_fs): New function.
(fhandler_base::fstat_by_name): New function.
(fhandler_base::fstat_by_handle): New function.
(fhandler_base::isfifo): New function.
(fhandler_base::is_slow): New function.
(fhandler_base::is_auto_device): New function.
(fhandler_base::is_fs_special): New function.
(fhandler_base::device_access_denied): New function.
(fhandler_base::operator DWORD&): New operator.
(fhandler_base::get_name): Return normalized path from pc.
(fhandler_base::get_win32_name): Return windows path from pc.
(fhandler_base::isdevice): Renamed from is_device.
(fhandler_base::get_native_name): Return device format.
(fhandler_fifo): New class.
(fhandler_nodevice): New class.
(select_stuff::device_specific): Remove array.
(select_stuff::device_specific_pipe): New class element.
(select_stuff::device_specific_socket): New class element.
(select_stuff::device_specific_serial): New class element.
(select_stuff::select_stuff): Initialize new elements.
* fhandler_disk_file.cc (fhandler_base::fstat_by_handle): Move to base class
from fhandler_disk_file.
(fhandler_base::fstat_by_name): Ditto.
(fhandler_base::fstat_by_name): Ditto.
(fhandler_disk_file::open): Move most functionality into
fhandler_base::open_fs.
(fhandler_base::open_fs): New function.
(fhandler_disk_file::close): Move most functionality into
fhandler_base::close_fs.
(fhandler_base::close_fs): New function.
* fhandler_mem.cc (fhandler_dev_mem::open): Use device name in debugging
output.
* fhandler_socket.cc (fhandler_socket::set_connect_secret): Copy standard
urandom device into appropriate place.
(fhandler_socket::accept): Reflect change in fdsock return value.
* fhandler_tty.cc: See "throughouts" above.
* net.cc: Accommodate fdsock change throughout.
(fdsock): Return success or failure, accept fd argument and device argument.
* path.cc (symlink_info::major): New element.
(symlink_info::minor): New element.
(symlink_info::parse_device): Declare new function.
(fs_info::update): Accommodate changes in path_conv class.
(path_conv::fillin): Ditto.
(path_conv::return_and_clear_normalized_path): Eliminate.
(path_conv::set_normalized_path): New function.
(path_conv::path_conv): Set info in dev element. Use path_conv methods Check
for FH_FS rather than FH_BAD to indicate when to fill in filesystem stuff.
where appropriate rather than direct access. Use set_normalized_path to set
normalized path.
(windows_device_names): Eliminate.
(get_dev): Ditto.
(get_raw_device_number): Ditto.
(get_device_number): Ditto.
(win32_device_name): Call new device name parser to do most of the heavy
lifting.
(mount_info::conv_to_win32_path): Fill in dev field as appropriate.
(symlink_worker): Handle new device files.
(symlink_info::check): Ditto.
(symlink_info::parse_device): Define new function.
* path.h (executable_states): Move here from fhandler.h.
(fs_info): Rename variables to *_storage and create methods for accessing same.
(path_conv): Add dev element, remove devn and unit and adjust inline methods to
accommodate.
(set_normalized_path): Declare new function.
* pinfo.cc (_pinfo::commune_recv): Add broken support for handling fifos.
(_pinfo::commune_send): Ditto.
* pipe.cc (fhandler_pipe::close): check for existence of handle before closing
it.
(handler_pipe::create): Rename from make_pipe. Change arguments to accept
fhandler_pipe array. Accommodate fifos.
(pipe): Rework to deal with fhandler_pipe::create changes.
(_pipe): Ditto.
* select.cc: Use individual device_specific types throughout rather than
indexing with obsolete device number.
(set_bits): Use is_socket call rather than checking device number.
* shared_info.h (CURR_MOUNT_MAGIC): Update.
(conv_to_win32_path): Reflect addition of device argument.
* syscalls.cc (mknod_worker): New function.
(open): Use build_fh_name to build fhandler.
(chown_worker): Detect if this is an 'auto' device rather than an on-filesystem
device and handle appropriately.
(chmod_device): New function.
(chmod): Detect if this is an 'auto' device rather than an on-filesystem device
and handle appropriately. Use chmod_device to set mode of in-filesystem
devices.
(stat_worker): Eliminate path_conv argument. Call build_fh_name to construct
fhandler. Use fh->error() rather than pc->error to detect errors in fhandler
construction.
(access_worker): New function pulled from access. Accommodate in-filesystem
devices.
(access): Use access_worker.
(fpathconf): Detect if this is an 'auto' device rather than an on-filesystem
device and handle appropriately.
(mknod_worker): New function.
(mknod32): New function.
(chroot): Free normalized path -- assuming it was actually cmalloced.
* tty.cc (create_tty_master): Tweak for new device class.
(tty::common_init): Ditto.
* winsup.h (stat_worker): Remove.
(symlink_worker): Declare.
* exceptions.cc (set_process_mask): Just call sig_dispatch_pending and don't
worry about pending_signals since sig_dispatch_pending should always do the
right thing now.
(sig_handle): Reorganize SIGCONT handling to more closely conform to SUSv3.
* pinfo.h: Move __SIG enum to sigproc.h.
(PICOM_FIFO): New enum element.
(_pinfo): Remove 'thread2signal' stuff throughout class.
(_pinfo::commune_send): Make varargs.
(_pinfo::sigtodo): Eliminate.
(_pinfo::thread2signal): Ditto.
* signal.cc (kill_worker): Eliminate call to setthread2signal.
* sigproc.cc (local_sigtodo): Eliminate.
(getlocal_sigtodo): Ditto.
(sigelem): New class.
(pending_signals): New class.
(sigqueue): New variable, start of sigqueue linked list.
(sigcatch_nonmain): Eliminate.
(sigcatch_main): Eliminate.
(sigcatch_nosync): Eliminate.
(sigcomplete_nonmain): Eliminate.
(pending_signals): Eliminate.
(sig_clear): Call signal thread to clear pending signals, unless already in
signal thread.
(sigpending): Call signal thread to get pending signals.
(sig_dispatch_pending): Eliminate use of pending_signals and just check
sigqueue.
(sigproc_terminate): Eliminate all of the obsolete semaphore stuff. Close
signal pipe handle.
(sig_send): Eliminate all of the obsolete semaphore stuff and use pipe to send
signals.
(getevent): Eliminate.
(pending_signals::add): New function.
(pending_signals::del): New function.
(pending_signals::next): New function.
(wait_sig): Eliminate all of the obsolete semaphore stuff. Use pipe to
communicate and maintain a linked list of signals.
* sigproc.h: Move __SIG defines here. Add __SIGPENDING.
(sig_dispatch_pending): Remove "C" specifier.
(sig_handle): Accept a mask argument.
* thread.cc: Remove signal handling considerations throughout.
set.
* exceptions.cc (sig_handle_tty_stop): Don't reset sigCONT event since it is
reset automatically.
* fork.cc (fork): Remove obsolete usage of PID_SPLIT_HEAP.
* include/sys/cygwin.h: Ditto.
* sigproc.cc (sig_send): Use sigframe init method to set frame since it checks
for previous ownership of the frame.
* sigproc.h (sigframe::init): Accept an "is_exception" argument.
(dll_crt0_1): Store argc in __argc_safe, which will theoretically remain
untouched by the user.
* fhandler_console.cc (fhandler_console::read): Silence some compiler warnings.
* fhandler_raw.cc (fhandler_dev_raw::raw_read): Ditto.
* pinfo.cc (_pinfo::commune_recv): Carefully bound argv scan and check for
potentially bad pointers since user could have set argv cell to anythinw.
* cygheap.h (CYGHEAPSIZE): Bump up size.
Corinna Vinschen
Christopher Faylor