* mips.h (M_DEXT, M_DINS): Delete.
opcodes/
* micromips-opc.c (micromips_opcodes): Replace "dext" and "dins"
macro entries with "dextm", "dextu", "dinsm" and "dinsu" aliases.
Use +H rather than +C for the real "dext".
* mips-opc.c (mips_builtin_opcodes): Likewise.
gas/
* config/tc-mips.c (report_bad_range, report_bad_field): Delete.
(macro): Remove M_DEXT and M_DINS handling.
gas/testsuite/
* gas/mips/ext-ill.l, gas/mips/mips64r2-ill.l: Expect DEXT and DINS
error messages to have the same form as the EXT and INS ones.
* gas/mips/micromips-insn32.d, gas/mips/micromips-noinsn32.d,
gas/mips/micromips-trap.d, gas/mips/micromips.d,
gas/mips/micromips@mips64r2.d, gas/mips/mips64r2.d: Expect
"dext" and "dins" instead of "dextm", "dextu", "dinsm" and "dinsu".
2013-08-04 Jürgen Urban <JuergenUrban@gmx.de>
Richard Sandiford <rdsandiford@googlemail.com>
* mips.h: Document new VU0 operand characters.
(OP_VU0_SUFFIX, OP_VU0_MATCH_SUFFIX): New mips_operand_types.
(OP_REG_VF, OP_REG_VI, OP_REG_R5900_I, OP_REG_R5900_Q, OP_REG_R5900_R)
(OP_REG_R5900_ACC): New mips_reg_operand_types.
(INSN2_VU0_CHANNEL_SUFFIX): New macro.
(mips_vu0_channel_mask): Declare.
opcodes/
2013-08-04 Jürgen Urban <JuergenUrban@gmx.de>
Richard Sandiford <rdsandiford@googlemail.com>
* mips-dis.c (print_reg): Handle OP_REG_VI, OP_REG_VF, OP_REG_R5900_I,
OP_REG_R5900_Q, OP_REG_R5900_R and OP_REG_R5900_ACC.
(print_vu0_channel): New function.
(print_insn_arg): Handle OP_VU0_SUFFIX and OP_VU0_MATCH_SUFFIX.
(print_insn_args): Handle '#'.
(print_insn_mips): Handle INSN2_VU0_CHANNEL_SUFFIX.
* mips-opc.c (mips_vu0_channel_mask): New constant.
(decode_mips_operand): Handle new VU0 operand types.
(VU0, VU0CH): New macros.
(mips_builtin_opcodes): Add VU0 opcodes. Use "+7" rather than "E"
for LQC2 and SQC2. Use "+9" rather than "G" for EE CFC2 and CTC2.
Use "+6" rather than "G" for QMFC2 and QMTC2.
gas/
2013-08-04 Jürgen Urban <JuergenUrban@gmx.de>
Richard Sandiford <rdsandiford@googlemail.com>
* config/tc-mips.c (MAX_OPERANDS): Bump to 6.
(RWARN): Bump to 0x8000000.
(RTYPE_VI, RTYPE_VF, RTYPE_R5900_I, RTYPE_R5900_Q, RTYPE_R5900_R)
(RTYPE_R5900_ACC): New register types.
(RTYPE_MASK): Include them.
(R5900_I_NAMES, R5900_Q_NAMES, R5900_R_NAMES, R5900_ACC_NAMES): New
macros.
(reg_names): Include them.
(mips_parse_register_1): New function, split out from...
(mips_parse_register): ...here. Add a channels_ptr parameter.
Look for VU0 channel suffixes when nonnull.
(reg_lookup): Update the call to mips_parse_register.
(mips_parse_vu0_channels): New function.
(OT_CHANNELS, OT_DOUBLE_CHAR): New mips_operand_token_types.
(mips_operand_token): Add a "channels" field to the union.
Extend the comment above "ch" to OT_DOUBLE_CHAR.
(mips_parse_base_start): Match -- and ++. Handle channel suffixes.
(mips_parse_argument_token): Handle channel suffixes here too.
(validate_mips_insn): Handle INSN2_VU0_CHANNEL_SUFFIX.
Ignore OP_VU0_MATCH_SUFFIX when calculating the used bits.
Handle '#' formats.
(md_begin): Register $vfN and $vfI registers.
(operand_reg_mask): Handle OP_VU0_SUFFIX and OP_VU0_MATCH_SUFFIX.
(convert_reg_type): Handle OP_REG_VI, OP_REG_VF, OP_REG_R5900_I,
OP_REG_R5900_Q, OP_REG_R5900_R and OP_REG_R5900_ACC.
(match_vu0_suffix_operand): New function.
(match_operand): Handle OP_VU0_SUFFIX and OP_VU0_MATCH_SUFFIX.
(macro): Use "+7" rather than "E" for LDQ2 and STQ2.
(mips_lookup_insn): New function.
(mips_ip): Use it. Allow "+K" operands to be elided at the end
of an instruction. Handle '#' sequences.
gas/testsuite/
2013-08-04 Jürgen Urban <JuergenUrban@gmx.de>
* gas/mips/r5900-vu0.d: Expect $vfN and $viN instead of numeric
coprocessor registers.
* gas/mips/r5900-all-vu0.s, gas/mips/r5900-all-vu0.d,
gas/mips/r5900-full-vu0.s, gas/mips/r5900-full-vu0.d,
gas/mips/r5900-error-vu0.s, gas/mips/r5900-error-vu0.l: New tests.
* gas/mips/mips.exp: Run them.
* mips.h (mips_pcrel_operand): Inherit from mips_int_operand.
(mips_int_operand_min, mips_int_operand_max): New functions.
(mips_decode_pcrel_operand): Use mips_decode_int_operand.
opcodes/
* mips-formats.h (PCREL): Reorder parameters and update the definition
to match new mips_pcrel_operand layout.
(JUMP, JALX, BRANCH): Update accordingly.
* mips16-opc.c (decode_mips16_operand): Likewise.
gas/
* config/tc-mips.c (match_int_operand): Use mips_int_operand_min
and mips_int_operand_max.
(mips16_immed_operand, mips16_immed_operands, MIPS16_NUM_IMMED):
Delete.
(mips16_immed_operand, mips16_immed_in_range_p): New functions.
(mips16_immed, mips16_extended_frag): Use them. Use mips_int_operand
instead of mips16_immed_operand.
* mips.h (MIPS16_INSN_WRITE_SP, MIPS16_INSN_READ_31)
(MIPS16_INSN_READ_PC, MIPS16_INSN_UNCOND_BRANCH)
(MIPS16_INSN_COND_BRANCH): Delete.
opcodes/
* mips16-opc.c (UBR, CBR, RD_31, RD_PC): Redefine as INSN2_* flags.
(WR_SP): Replace with...
(MOD_SP): ...this.
(mips16_opcodes): Update accordingly.
* mips-dis.c (print_insn_mips16): Likewise.
gas/
* config/tc-mips.c (compact_branch_p, uncond_branch_p): Use the same
flags for MIPS16 and non-MIPS16 instructions.
(gpr_mod_mask): Move the INSN2_MOD_SP case outside the micromips block.
(gpr_read_mask): Use INSN2_READ_GPR_31 for MIPS16 instructions too.
(gpr_write_mask): Remove MIPS16_INSN_WRITE_SP handling.
(can_swap_branch_p, get_append_method): Use the same flags for MIPS16
and non-MIPS16 instructions. Fix formatting.
* mips.h (mips_operand_type, mips_reg_operand_type): New enums.
(mips_operand, mips_int_operand, mips_mapped_int_operand)
(mips_msb_operand, mips_reg_operand, mips_reg_pair_operand)
(mips_pcrel_operand): New structures.
(mips_insert_operand, mips_extract_operand, mips_signed_operand)
(mips_decode_int_operand, mips_decode_pcrel_operand): New functions.
(decode_mips_operand, decode_micromips_operand): Declare.
opcodes/
* mips-formats.h: New file.
* mips-opc.c: Include mips-formats.h.
(reg_0_map): New static array.
(decode_mips_operand): New function.
* micromips-opc.c: Remove <stdio.h> include. Include mips-formats.h.
(reg_0_map, reg_28_map, reg_29_map, reg_31_map, reg_m16_map)
(reg_mn_map, reg_q_map, reg_h_map1, reg_h_map2, int_b_map)
(int_c_map): New static arrays.
(decode_micromips_operand): New function.
* mips-dis.c (micromips_to_32_reg_b_map, micromips_to_32_reg_c_map)
(micromips_to_32_reg_d_map, micromips_to_32_reg_e_map)
(micromips_to_32_reg_f_map, micromips_to_32_reg_g_map)
(micromips_to_32_reg_h_map1, micromips_to_32_reg_h_map2)
(micromips_to_32_reg_l_map, micromips_to_32_reg_m_map)
(micromips_to_32_reg_n_map, micromips_to_32_reg_q_map)
(micromips_imm_b_map, micromips_imm_c_map): Delete.
(print_reg): New function.
(mips_print_arg_state): New structure.
(init_print_arg_state, print_insn_arg): New functions.
(print_insn_args): Change interface and use mips_operand structures.
Delete GET_OP_S. Move GET_OP definition to...
(print_insn_mips): ...here. Update the call to print_insn_args.
(print_insn_micromips): Use print_insn_args.
gas/
* config/tc-mips.c (validate_mips_insn): Move further up file.
Add insn_bits and decode_operand arguments. Use the mips_operand
fields to work out which bits an operand occupies. Detect double
definitions.
(validate_micromips_insn): Move further up file. Call into
validate_mips_insn.
* mips.h (EF_MIPS_NAN2008): New macro.
bfd/
* elfxx-mips.c (_bfd_mips_elf_merge_private_bfd_data): Handle
EF_MIPS_NAN2008.
(_bfd_mips_elf_print_private_bfd_data): Likewise.
binutils/
* readelf.c (get_machine_flags): Handle EF_MIPS_NAN2008.
gas/
* config/tc-mips.c (mips_flag_nan2008): New variable.
(options): Add OPTION_NAN enum value.
(md_longopts): Handle it.
(md_parse_option): Likewise.
(s_nan): New function.
(mips_elf_final_processing): Handle EF_MIPS_NAN2008.
(md_show_usage): Add -mnan.
* doc/as.texinfo (Overview): Add -mnan.
* doc/c-mips.texi (MIPS Opts): Document -mnan.
(MIPS NaN Encodings): New node. Document .nan directive.
(MIPS-Dependent): List the new node.
gas/testsuite/
* gas/mips/nan-2008-1.d: New test.
* gas/mips/nan-2008-2.d: New test.
* gas/mips/nan-2008-3.d: New test.
* gas/mips/nan-2008-4.d: New test.
* gas/mips/nan-legacy-1.d: New test.
* gas/mips/nan-legacy-2.d: New test.
* gas/mips/nan-legacy-3.d: New test.
* gas/mips/nan-legacy-4.d: New test.
* gas/mips/nan-legacy-5.d: New test.
* gas/mips/nan-error-1.l: New list test.
* gas/mips/nan-error-2.l: New list test.
* gas/mips/nan-2008-override.s: New test source.
* gas/mips/nan-2008.s: New test source.
* gas/mips/nan-legacy-override.s: New test source.
* gas/mips/nan-legacy.s: New test source.
* gas/mips/nan-error-1.s: New test source.
* gas/mips/nan-error-2.s: New test source.
* gas/mips/mips.exp: Run the new tests.
ld/testsuite/
* ld-mips-elf/nan-2008.d: New test.
* ld-mips-elf/nan-legacy.d: New test.
* ld-mips-elf/nan-mixed-1.d: New test.
* ld-mips-elf/nan-mixed-2.d: New test.
* ld-mips-elf/nan-2008.s: New test source.
* ld-mips-elf/nan-legacy.s: New test source.
* mips.h (M_ACLR_OB, M_ASET_OB, M_CACHE_OB, M_CACHEE_OB, M_L_DOB)
(M_LB_A, M_LBE_OB, M_LBU_A, M_LBUE_OB, M_LD_A, M_LD_OB, M_LDC2_OB)
(M_LDL_OB, M_LDM_OB, M_LDP_OB, M_LDR_OB, M_LH_A, M_LHE_OB, M_LHU_A)
(M_LHUE_OB, M_LL_OB, M_LLD_OB, M_LLE_OB, M_LS_A, M_LW_A, M_LWE_OB)
(M_LWC0_A, M_LWC1_A, M_LWC2_A, M_LWC2_OB, M_LWC3_A, M_LWL_A, M_LWL_OB)
(M_LWLE_OB, M_LWM_OB, M_LWP_OB, M_LWR_A, M_LWR_OB, M_LWRE_OB, M_LWU_OB)
(M_PREF_OB, M_PREFE_OB, M_S_DOB, M_SAA_OB, M_SAAD_OB, M_SC_OB)
(M_SCD_OB, M_SCE_OB, M_SD_A, M_SD_OB, M_SDC2_OB, M_SDL_OB, M_SDM_OB)
(M_SDP_OB, M_SDR_OB, M_SB_A, M_SBE_OB, M_SH_A, M_SHE_OB, M_SW_A)
(M_SWE_OB, M_SWC0_A, M_SWC1_A, M_SWC2_A, M_SWC2_OB, M_SWC3_A, M_SWL_A)
(M_SWL_OB, M_SWLE_OB, M_SWM_OB, M_SWP_OB, M_SWR_A, M_SWR_OB, M_SWRE_OB)
(M_ULD, M_ULH, M_ULHU, M_ULW, M_USH, M_USW, M_USD): Delete.
(M_ULD_A, M_ULH_A, M_ULHU_A, M_ULW_A, M_USH_A, M_USW_A, M_USD_A):
Rename to...
(M_ULD_AB, M_ULH_AB, M_ULHU_AB, M_ULW_AB, M_USH_AB, M_USW_AB)
(M_USD_AB): ...these.
opcodes/
* mips-opc.c (mips_builtin_opcodes): Remove o(b) macros. Move LD
and SD A(B) macros up.
* micromips-opc.c (micromips_opcodes): Likewise.
gas/
* config/tc-mips.c (gprel16_reloc_p): New function.
(macro_read_relocs): Assume BFD_RELOC_LO16 if all relocs are
BFD_RELOC_UNUSED.
(offset_high_part, small_offset_p): New functions.
(nacro): Use them. Remove *_OB and *_DOB cases. For single-
register load and store macros, handle the 16-bit offset case first.
If a 16-bit offset is not suitable for the instruction we're
generating, load it into the temporary register using
ADDRESS_ADDI_INSN. Make the M_LI_DD code fall through into the
M_L_DAB code once the address has been constructed. For double load
and store macros, again handle the 16-bit offset case first.
If the second register cannot be accessed from the same high
part as the first, load it into AT using ADDRESS_ADDI_INSN.
Fix the handling of LD in cases where the first register is the
same as the base. Also handle the case where the offset is
not 16 bits and the second register cannot be accessed from the
same high part as the first. For unaligned loads and stores,
fuse the offbits == 12 and old "ab" handling. Apply this handling
whenever the second offset needs a different high part from the first.
Construct the offset using ADDRESS_ADDI_INSN where possible,
for offbits == 16 as well as offbits == 12. Use offset_reloc
when constructing the individual loads and stores.
(mips_ip): Set up imm_expr, imm2_expr, offset_expr, imm_reloc
and offset_reloc before matching against a particular opcode.
Handle elided 'A' constants. Allow 'A' constants to use
relocation operators.
gas/testsuite/
* gas/mips/ldstla-32.d: Avoid "lui at,0x0" sequences for
truncated constants.
* gas/mips/ldstla-32-shared.d: Likewise.
* gas/mips/mcu.d: Use ADDIU in preference to LI+ADDU when adding
16-bit constants to the base.
* gas/mips/micromips@mcu.d: Likewise.
* gas/mips/micromips@cache.d: Likewise.
* gas/mips/micromips@pref.d: Likewise.
* gas/mips/micromips.d, gas/mips/micromips-insn32.d,
gas/mips/micromips-noinsn32.d, gas/mips/micromips-trap.d: Likewise.
Allow the full 16-bit offset range to be used for SB, LB and LBU in
USH and ULH sequences. Fix the expected output for LD and SD when
the two LW and SW offsets need different high parts.
* gas/mips/eva.s: Test PREFE with relocation operators.
* gas/mips/eva.d: Use ADDIU in preference to LI+ADDU for 16-bit
constants. Update after eva.s change.
* gas/mips/micromips@eva.d: Likewise.
* gas/mips/ld-reloc.s, gas/mips/ld-reloc.d, gas/mips/l_d-reloc.s,
gas/mips/l_d-reloc.d, gas/mips/ulw-reloc.s, gas/mips/ulw-reloc.d,
gas/mips/micromips@ulw-reloc.d, gas/mips/ulh-reloc.s,
gas/mips/ulh-reloc.d: New tests.
* gas/mips/mips.exp: Run them.
* mips.h: Remove documentation of "[" and "]". Update documentation
of "k" and the MDMX formats.
opcodes/
* mips-opc.c (mips_builtin_opcodes): Use "Q" for the INSN_5400
MDMX-like instructions.
* mips-dis.c (print_insn_arg): Use "$f" rather than "$v" when
printing "Q" operands for INSN_5400 instructions.
gas/
* config/tc-mips.c (validate_mips_insn): Remove "[" and "]" handling.
(mips_ip): Likewise. Do not set is_mdmx for INSN_5400 instructions.
Check constraints on the VR5400 RZU.OB, SLL.OB and SRL.OB instructions.
gas/testsuite/
* gas/mips/vr5400-ill.s, gas/mips/vr5400-ill.l: New test.
* gas/mips/mips.exp: Run it.
* mips.h: Update documentation of "+s" and "+S".
opcodes/
* mips-opc.c (mips_builtin_opcodes): Use "+s" for "cins32" and
"+S" for "cins".
* mips-dis.c (print_mips_arg): Update "+s" and "+S" comments.
Combine cases.
gas/
* config/tc-mips.c (mips_ip): Preserve the real bit number for "+p".
Require the msb to be <= 31 for "+s". Check that the size is <= 31
for both "+s" and "+S".
* mips.h: Document "+i".
opcodes/
* mips-opc.c (mips_builtin_opcodes): Use "+i" rather than "a" for
"jalx".
* mips16-opc.c (mips16_opcodes): Likewise.
* micromips-opc.c (micromips_opcodes): Likewise.
* mips-dis.c (print_insn_args, print_mips16_insn_arg)
(print_insn_mips16): Handle "+i".
(print_insn_micromips): Likewise. Conditionally preserve the
ISA bit for "a" but not for "+i".
gas/
* config/tc-mips.c (validate_mips_insn, validate_micromips_insn):
(mips_ip, mips16_ip): Handle "+i".
* mips.h: Remove documentation of "+D" and "+T".
opcodes/
* mips-opc.c (mips_builtin_opcodes): Remove "+D" and "+T" entries.
* micromips-opc.c (micromips_opcodes): Likewise.
* mips-dis.c (print_insn_args, print_insn_micromips): Remove "+D"
and "+T" handling. Check for a "0" suffix when deciding whether to
use coprocessor 0 names. In that case, also check for ",H" selectors.
gas/
* config/tc-mips.c (validate_mips_insn, validate_micromips_insn)
(mips_ip): Remove "+D" and "+T" handling.
gas/testsuite/
* gas/mips/lb.d, gas/mips/sb.d: Use coprocessor register names
for LWC0 and SWC0.
opcodes/
* s390-opc.c (J12_12, J24_24): New macros.
(INSTR_MII_UPI): Rename to INSTR_MII_UPP.
(MASK_MII_UPI): Rename to MASK_MII_UPP.
* s390-opc.txt: Rename MII_UPI to MII_UPP for bprp instruction.
include/elf/
* s390.h: Add new relocs R_390_PC12DBL, R_390_PLT12DBL,
R_390_PC24DBL, and R_390_PLT24DBL.
gas/testsuite/
* gas/s390/zarch-zEC12.s: Change bprp second operand and add
variants requiring relocations.
* gas/s390/zarch-zEC12.d: Likewise.
gas/
* config/tc-s390.c (md_gather_operands, md_apply_fix): Support new
relocs.
bfd/
* elf32-s390.c: Add new relocation definitions R_390_PC12DBL,
R_390_PLT12DBL, R_390_PC24DBL, and R_390_PLT24DBL.
(elf_s390_reloc_type_lookup, elf_s390_check_relocs)
(elf_s390_gc_sweep_hook, elf_s390_relocate_section): Support new
relocations.
* elf64-s390.c: See elf32-s390.c
* bfd-in2.h: Add new relocs to enum bfd_reloc_code_real.
* libbfd.h: Add new reloc strings.
* mips.h: Fix comment for "1": it is now STYPE rather than SHAMT.
Use "source" rather than "destination" for microMIPS "G".
gas/
* config/tc-mips.c (validate_mips_insn): Use STYPE rather than SHAMT.
* elfxx-mips.h (_bfd_mips_elf_get_synthetic_symtab): New
prototype.
* elf32-mips.c (elf_backend_plt_sym_val): Remove macro.
(bfd_elf32_get_synthetic_symtab): New macro.
* elfxx-mips.c (plt_entry): New structure.
(mips_elf_link_hash_entry): Add use_plt_entry member.
(mips_elf_link_hash_table): Rename plt_entry_size member to
plt_mips_entry_size. Add plt_comp_entry_size, plt_mips_offset,
plt_comp_offset, plt_got_index entries and plt_header_is_comp
members.
(STUB_LW_MICROMIPS, STUB_MOVE_MICROMIPS): New macros.
(STUB_LUI_MICROMIPS, STUB_JALR_MICROMIPS): Likewise.
(STUB_ORI_MICROMIPS, STUB_LI16U_MICROMIPS): Likewise.
(STUB_LI16S_MICROMIPS): Likewise.
(MICROMIPS_FUNCTION_STUB_NORMAL_SIZE): Likewise.
(MICROMIPS_FUNCTION_STUB_BIG_SIZE): Likewise.
(micromips_o32_exec_plt0_entry): New variable.
(mips16_o32_exec_plt_entry): Likewise.
(micromips_o32_exec_plt_entry): Likewise.
(mips_elf_link_hash_newfunc): Initialize use_plt_entry.
(mips_elf_output_extsym): Update to use gotplt_union's plist
member rather than offset.
(mips_elf_gotplt_index): Likewise. Remove the VxWorks
restriction. Use MIPS_ELF_GOT_SIZE to calculate GOT address.
(mips_elf_count_got_symbols): Update to use gotplt_union's plist
member rather than offset.
(mips_elf_calculate_relocation): Handle MIPS16/microMIPS PLT
entries.
(_bfd_mips_elf_create_dynamic_sections): Don't set PLT sizes
here.
(mips_elf_make_plt_record): New function.
(_bfd_mips_elf_check_relocs): Update comment. Record occurences
of JAL relocations that might need a PLT entry.
(_bfd_mips_elf_adjust_dynamic_symbol): Update to use
gotplt_union's plist member rather than offset. Set individual
PLT entry sizes here. Handle MIPS16/microMIPS PLT entries.
Don't set the symbol's value in the symbol table for PLT
references here. Don't set the PLT or PLT GOT section sizes
here.
(mips_elf_estimate_stub_size): Handle microMIPS stubs.
(mips_elf_allocate_lazy_stub): Likewise.
(mips_elf_lay_out_lazy_stubs): Likewise. Define a _MIPS_STUBS_
magic symbol.
(mips_elf_set_plt_sym_value): New function.
(_bfd_mips_elf_size_dynamic_sections): Set PLT header size and
PLT and PLT GOT section sizes here. Set the symbol values in
the symbol table for PLT references here. Handle microMIPS
annotation of the _PROCEDURE_LINKAGE_TABLE_ magic symbol.
(_bfd_mips_elf_finish_dynamic_symbol): Update to use
gotplt_union's plist member rather than offset. Handle
MIPS16/microMIPS PLT entries. Handle microMIPS stubs.
(_bfd_mips_vxworks_finish_dynamic_symbol): Update to use
gotplt_union's plist member rather than offset. Use
MIPS_ELF_GOT_SIZE to calculate GOT address.
(mips_finish_exec_plt): Handle microMIPS PLT. Return status.
(_bfd_mips_elf_finish_dynamic_sections): Handle result from
mips_finish_exec_plt.
(_bfd_mips_elf_link_hash_table_create): Update to use
gotplt_union's plist member rather than offset.
(_bfd_mips_elf_get_synthetic_symtab): New function.
include/elf/
* mips.h (ELF_ST_IS_MIPS_PLT): Respect STO_MIPS16 setting.
(ELF_ST_SET_MIPS_PLT): Likewise.
gdb/
* mips-tdep.c (mips_elf_make_msymbol_special): Handle MIPS16 and
microMIPS synthetic symbols.
ld/
* emulparams/elf32btsmip.sh: Arrange for .got.plt to be placed
as close to .plt as possible.
* scripttempl/elf.sc: Handle $INITIAL_READWRITE_SECTIONS and
$PLT_NEXT_DATA variables.
ld/testsuite/
* ld-mips-elf/jalx-2.dd: Update for microMIPS PLT support.
* ld-mips-elf/pic-and-nonpic-3a.dd: Update for the _MIPS_STUBS_
magic symbol.
* ld-mips-elf/pic-and-nonpic-3b.dd: Likewise.
* ld-mips-elf/pic-and-nonpic-6-n32.dd: Likewise.
* ld-mips-elf/pic-and-nonpic-6-n64.dd: Likewise.
* ld-mips-elf/pic-and-nonpic-6-o32.dd: Likewise.
* ld-mips-elf/stub-dynsym-1-10000.d: Likewise.
* ld-mips-elf/stub-dynsym-1-2fe80.d: Likewise.
* ld-mips-elf/stub-dynsym-1-7fff.d: Likewise.
* ld-mips-elf/stub-dynsym-1-8000.d: Likewise.
* ld-mips-elf/stub-dynsym-1-fff0.d: Likewise.
* ld-mips-elf/tlslib-o32.d: Likewise.
opcodes/
* mips-dis.c (is_mips16_plt_tail): New function.
(print_insn_mips16): Handle MIPS16 PLT entry's GOT slot address
word.
(is_compressed_mode_p): Handle MIPS16/microMIPS PLT entries.
2013-06-08 Catherine Moore <clm@codesourcery.com>
* config/tc-mips.c (is_opcode_valid): Build ASE mask.
(is_opcode_valid_16): Pass ase value to opcode_is_member.
(append_insn): Change INSN_xxxx to ASE_xxxx.
include/
2013-06-08 Catherine Moore <clm@codesourcery.com>
* opcode/mips.h (mips_opcode): Add ase field.
(INSN_ASE_MASK): Delete.
(INSN_DSP): Rename to ASE_DSP. Provide new value.
(INSN_DSPR2): Rename to ASE_DSPR2. Provide new value.
(INSN_MCU): Rename to ASE_MCU. Provide new value.
(INSN_MDMX): Rename to ASE_MDMX. Provide new value.
(INSN_MIPS3d): Rename to ASE_MIPS3D. Provide new value.
(INSN_MT): Rename to ASE_MT. Provide new value.
(INSN_SMARTMIPS): Rename to ASE_SMARTMIPS. Provide new value.
(INSN_VIRT): Rename to ASE_VIRT. Provide new value.
(INSN_VIRT64): Rename to ASE_VIRT64. Provide new value.
(opcode_is_member): Add ase argument. Check ase.
opcodes/
2013-06-08 Catherine Moore <clm@codesourcery.com>
Richard Sandiford <rdsandiford@googlemail.com>
* micromips-opc.c (D32, D33, MC): Update definitions.
(micromips_opcodes): Initialize ase field.
* mips-dis.c (mips_arch_choice): Add ase field.
(mips_arch_choices): Initialize ase field.
(set_default_mips_dis_options): Declare and setup mips_ase.
* mips-opc.c (M3D, SMT, MX, IVIRT, IVIRT64, D32, D33, D64,
MT32, MC): Update definitions.
(mips_builtin_opcodes): Initialize ase field.
DJ Delorie
Chao-ying Fu
Sean Keys
Steve Ellcey
Nick Clifton
Richard Sandiford
Eric Botcazou
H.J. Lu
Maciej W. Rozycki
Tristan Gingold
Andreas Krebbel
Yufeng Zhang
Will Newton
Catherine Moore
Sandra Loosemore