- After commit 6cc299f0e2, outputs of
cygwin programs which call both printf() and WriteConsole() are
frequently distorted. This patch fixes the issue.
- The cause of the problem reported in
https://www.cygwin.com/ml/cygwin/2020-01/msg00220.html is that the
chars input before dup() cannot be read from the new file descriptor.
This is because the readahead buffer (rabuf) in the console is newly
created by dup(), and does not inherit from the parent. This patch
fixes the issue.
If the O_PATH flag is set, fhandler_fifo::open now simply calls
fhandler_base::open_fs.
The previous attempt to handle O_PATH in commit aa55d22c, "Cygwin:
honor the O_PATH flag when opening a FIFO", fixed a hang but otherwise
didn't do anything useful.
If O_PATH is set in the flags argument of
fhandler_base::device_access_denied, return false. No
read/write/execute access should be required in this case.
Previously, the call to device_access_denied in open(2) would lead to
an attempt to open the file with read access even if the O_PATH flag
was set.
rdpru flag is cpuid xfn 80000008 ebx bit 4 added in linux 5.5;
see AMD64 Architecture Programmer's Manual Volume 3:
General-Purpose and System Instructions
https://www.amd.com/system/files/TechDocs/24594.pdf#page=329
and elsewhere in that document
- For programs which does not work properly with pseudo console,
disable_pcon in environment CYGWIN is introduced. If disable_pcon
is set, pseudo console support is disabled.
- For programs compiled with -mwindows option, reopening slave is
needed in push_to_pcon_screenbuffer(), however, it was not at
appropriate place. This causes the problem reported in
https://www.cygwin.com/ml/cygwin/2020-01/msg00161.html. This
patch fixes the issue.
- Though this rarely happens, sometimes the first printing of non-
cygwin process does not displayed correctly. To fix this issue,
the code for waiting for forwarding by master_fwd_thread is revised.
Following Linux, allow the pathname argument to be an empty string if
the AT_EMPTY_PATH flag is specified. In this case the dirfd argument
can refer to any type of file, not just a directory, and the call
operates on that file. In particular, dirfd can refer to a symlink
that was opened with O_PATH | O_NOFOLLOW.
Following Linux, allow the pathname argument to be an empty string,
provided the dirfd argument refers to a symlink opened with
O_PATH | O_NOFOLLOW. The readlinkat call then operates on that
symlink.
Commit 283cb372, "Cygwin: normalize_win32_path: improve error
checking", required a prefix '\\?\' or '\??\' in the source path to be
followed by 'UNC\' or 'X:\', where X is a drive letter. That was too
restrictive, since it disallowed the paths '\\?\X: and '\??\X:'. This
caused problems when a user tried to use the root of a drive as the
Cygwin installation root, as reported here:
https://cygwin.com/ml/cygwin/2020-01/msg00111.html
Modify the requirement so that '\??\X:' and '\\?\X:' are now allowed
as source paths, without a trailing backslash.
- In octave gui, sometimes state mismatch between real pty state
and state variable occurs. For example, this occurs when 'ls'
command is executed in octave gui. This patch fixes the issue.
- After commit e1a0775dc0, the problem
reported in https://www.cygwin.com/ml/cygwin/2020-01/msg00093.html
occurs. For Gnu scren and tmux, calling FreeConsole() on pty close
is necessary. However, if FreeConsole() is called, cygwin setup
with '-h' option does not work. Therefore, the commit
e1a0775dc0 delayed closing pty.
This is the cause of the problem above. Now, instead of delaying
pty close, FreeConsole() is not called if the process is non cygwin
processes such as cygwin setup.
- The console with 24bit color support has a problem that console
mode is changed if cygwin process is executed in cmd.exe which
started in cygwin shell. For example, cursor keys become not
working if bash -> cmd -> true are executed in this order.
This patch fixes the issue.
- In Win10 1809, the cursor position sometimes goes out of screen
by clear command in console. This seems to be caused by escape
sequence CSI3J (ESC[3J). This happens only for 1809. This patch
is a workaround for the issue.
- Special function keys such as arrow keys or function keys do not
work in ConEmu with cygwin-connector after commit
6a06c6bc8f. This patch fixes the
issue.
- PTY code which support pseudo console has a problem that causes
handle leaks. Four of these are bug in pty code, and the other
one seems to be a bug of Windows10. ClosePseudoConsole() fails
to close one internal handle. This patch fixes the issue.
- If two PTYs are opened in the same process and the first one
is closed, the helper process for the first PTY remains running.
This patch fixes the issue.
- The slowing down issue of X11 forwarding using ssh -Y, reported
in https://www.cygwin.com/ml/cygwin/2019-12/msg00295.html,
is due to the change of select() code for pty in the commit
915fcd0ae8. cygthread::detach()
takes at most about 10msec because Sleep() is used in the thread.
For this issue, this patch uses cygwait() instead of Sleep() and
introduces an event to abort the wait. For not only pty, but pipe
and fifo also have the same problem potentially, so this patch
applies same strategy to them as well.
Though our implementation of cpu sets doesn't need it, software from
Linux environments expects this definition to be present. It's
documented on the Linux CPU_SET(3) man page but was left out due to
oversight.
Addresses https://cygwin.com/ml/cygwin/2019-12/msg00248.html
Add that flag to the pipe type argument when creating the Windows
named pipe. And add a definition of that flag to ntdll.h (copied from
/usr/include/w32api/ddk/ntifs.h).
- Even with commit fe512b2b12, pty
still has a problem in ESC[?3h and ESC[?3l handling if invalid
sequence such as ESC[?$ is sent. This patch fixes the issue.
Both functions were introduce with Windows 7 only, so we need to
autoload them for the sake of Vista/2008.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
On certain error conditions there is a code snippet that checks
whether the last component of the path has a trailing dot or space or
a leading space. Skip this check if the last component is empty,
i.e., if the path ends with a backslash. This avoids an assertion
failure if the trailing backslash is the only backslash in the path,
as is the case for a DOS drive 'X:\'.
Addresses: https://cygwin.com/ml/cygwin/2019-12/msg00016.html
- Pseudo console clears console screen buffer if ESC[?3h or ESC[?3l
is sent. However, xterm/vt100 does not clear screen. This cause
mismatch between real screen and console screen buffer. Therefore,
this patch triggers redraw screen in that situation so that the
synchronization is done on the next execution of native app.
This solves the problem reported in:
https://www.cygwin.com/ml/cygwin-patches/2019-q4/msg00116.html
- Previously, pty cleared screen at startup for synchronization
between the real screen and console screen buffer for pseudo
console. With this patch, instead of clearing screen, the screen
is redrawn when the first native program is executed after pty
is created. In other words, synchronization is deferred until
the native app is executed. Moreover, this realizes excluding
$TERM dependent code.
fhandler_console::create_invisible_console_workaround() does not use the
lpApplicationName parameter and neglects to quote its command name on
lpCommandLine in the call to CreateProcessW.
Given CreateProcessW's brain-dead method to evaluate the application
path given on the command line, this opens up a security problem if
Cygwin is installed into a path with spaces in it.
Fix this by using the lpApplicationName parameter and quoting of the
application path in the lpCommandLine parameter (used as argv[0] in
the called console helper.
For extended paranoia, make the argument string array big enough to
fit full 64 bit pointer values into it. Handles usually only use
the lower 32 bit, but better safe than sorry.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
FH_CONS_MAX should refelect the fact that we allow 128 consoles, even if
it's unused.
Suggested-by: Achim Gratz <Stromeko@nexgo.de>
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Commit 5a0f2c00aa "Cygwin: fork/exec: fix child process permissions"
removed the PROCESS_DUP_HANDLE handle permission of the parent process
handle in the child to avoid a security problem.
It turned out that this broke the following scenario: If a process forks
and then the parent execs, the child loses the ability to register the
parent's death. To wit, after the parent died the child process does
not set its own PPID to 1 anymore.
The current exec mechanism copies required handle values (handles to
keep contact to the child processes) into the child_info for the
about-to-be-exec'ed process. The exec'ed process is supposed to
duplicate these handles. This fails, given that we don't allow the
exec'ed process PROCESS_DUP_HANDLE access to the exec'ing process since
commit 5a0f2c00aa.
The fix is to avoid the DuplicateHandle calls in the exec'ed process.
This patch sets the affected handles to "inheritable" in the exec'ing
process at exec time. The exec'ed process just copies the handle values
and resets handle inheritance to "non-inheritable". The exec'ing
process doesn't have to reset handle inheritance, it exits after setting
up the exec'ed process anyway.
Testcase: $ ssh-agent /bin/sleep 3
ssh-agent forks and the parent exec's sleep. After sleep exits, `ps'
should show ssh-agent to have PPID 1, and eventually ssh-agent exits.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Call find_exec with the FE_NNF flag to enforce a NULL return when the
executable isn't found in $PATH. Convert NULL to "". This aligns
spawnvp and spawnvpe with execvp and execvpe.
If the directory name has the form 'x:' followed by one or more
slashes or backslashes, and if there's at least one backslash, assume
that the user is referring to 'x:\', the root directory of drive x,
and don't strip the backslash.
Previously all trailing slashes and backslashes were stripped, and the
name was treated as a relative file name containing a literal colon.
Addresses https://cygwin.com/ml/cygwin/2019-08/msg00334.html.
Add feature test print macro that makes feature, bit, and flag text
comparison and checking easier. Handle as common former Intel only
feature flags also supported on AMD. Change order and some flag names
to agree with current Linux.
If the source path starts with the Win32 long path prefix '\\?\' or
the NT object directory prefix '\??\', require the prefix to be
followed by 'UNC\' or '<drive letter>:\'. Otherwise return EINVAL.
This fixes the assertion failure in symlink_info::check that was
reported here:
https://cygwin.com/ml/cygwin/2019-09/msg00228.html
That assertion failure was caused by normalize_win32_path returning a
path with no backslashes when the source path was '\\?\DRIVE'.
If the last component of the directory name is a symlink followed by a
slash, rmdir now fails, following Linux but not POSIX, even if the
symlink resolves to an existing empty directory.
mkdir was similarly changed in 2009 in commit
52dba6a5c4. Modify a comment to clarify
the purpose of that commit.
Addresses https://cygwin.com/ml/cygwin/2019-09/msg00221.html.
Prior to commit b0717aae, path_conv::check had the following code:
if (strncmp (path, "\\\\.\\", 4))
{
/* Windows ignores trailing dots and spaces in the last path
component, and ignores exactly one trailing dot in inner
path components. */
char *tail = NULL;
[...]
if (!tail || tail == path)
/* nothing */;
else if (tail[-1] != '\\')
{
*tail = '\0';
[...]
}
Commit b0717aae0 intended to disable this code, but it inadvertently
disabled only part of it. In particular, the declaration of the local
tail variable was in the disabled code, but the following remained:
if (!tail || tail == path)
/* nothing */;
else if (tail[-1] != '\\')
{
*tail = '\0';
[...]
}
[A later commit removed the disabled code.]
The tail variable here points into a string different from path,
causing that string to be truncated under some circumstances. See
https://cygwin.com/ml/cygwin/2019-09/msg00001.html
for more details.
This commit fixes the problem by removing the leftover code
that was intended to be removed in b0717aae.
- The autoload feature is used rather than GetModuleHandle(),
GetProcAddress() for CreatePseudoConsole(), ResizePseudoConsole()
and ClosePseudoConsole().
- Since calling system __loadlocale() caused execution error,
PTY used its own NLS function. The cause of the error has been
found, the corresponding code has been rewritten using system
function.
The CPU_SET macros defined in Cygwin's include/sys/cpuset.h must not
be visible in an application's namespace unless _GNU_SOURCE has been
#defined. Internally this means wrapping them in #if __GNU_VISIBLE.
- In non-canonical mode, cygwin console returned only one character
even if several keys are typed before read() called. This patch
fixes this behaviour.
- Previously, input and output pipes were switched together between
the traditional pty and the pseudo console. However, for example,
if stdin is redirected to another device, it is better to leave
input pipe traditional pty side even for non-cygwin program. This
patch realizes such behaviour.
- If screen alternated while pseudo console switching, it sometimes
failed. This might happen when the output of the non-cygwin program
is piped to less. This patch fixes this issue.
- When the I/O pipe is switched to the pseudo console side, the
behaviour of Ctrl-C was unstable. This rarely happens, however,
for example, shell sometimes crashes by Ctrl-C in that situation.
Furthermore, Ctrl-C was ignored if output of non-cygwin program
is redirected to pipe. This patch fixes these issues.
- Forcibly attach to pseudo console in advance so that the error
messages by system_printf() are displayed to screen reliably.
This is needed when stdout is redirected to another pty. In this
case, process has two ptys opened. However, process can attach
to only one console. So it is necessary to change console attached.
- PTY with pseudo console support sitll has problem which potentially
cause state mismatch between state variable and real console state.
This patch fixes this issue.
- select() did not work correctly when both read and except are
polled simultaneously for the same fd and the r/w pipe is switched
to pseudo console side. This patch fixes this isseu.
- Pseudo console support introduced by commit
169d65a577 shows garbage ^[[H^[[J in
some of emacs screens. These screens do not handle ANSI escape
sequences. Therefore, clear screen is disabled on these screens.
- Pseudo console support introduced by commit
169d65a577 sometimes cause random
crash or freeze by pressing ^C while cygwin and non-cygwin
processes are executed simultaneously in the same pty. This
patch is a workaround for this issue.
- API hook used for pseudo console support causes slow down.
This patch limits API hook to only program which is linked
with the corresponding APIs. Normal cygwin program is not
linked with such APIs (such as WriteFile, etc...) directly,
therefore, no slow down occurs. However, console access by
cygwin.dll itself cannot switch the r/w pipe to pseudo console
side. Therefore, the code to switch it forcely to pseudo
console side is added to smallprint.cc and strace.cc.
- Pseudo console support introduced by commit
169d65a577 has some bugs which
cause mismatch between state variables and real pseudo console
state regarding console attaching and r/w pipe switching. This
patch fixes this issue by redesigning the state management.
- PTY uses Win32 API hook for pseudo console suppot. The function
hook_api() is used for this purpose and defined in fhandler_tty.cc
previously. This patch moves it into hookapi.cc.
- Support pseudo console in PTY. Pseudo console is a new feature
in Windows 10 1809, which provides console APIs on virtual
terminal. With this patch, native console applications can work
in PTYs such as mintty, ssh, gnu screen or tmux.
Rather than waiting for signalfd_select_wait in a thread, which is racy,
create a global event "my_pendingsigs_evt" which is set and reset by
wait_sig depending only on the fact if blocked signals are pending or not.
This in turn allows to WFMO on this event in select as soon as signalfds
are present in the read descriptor set. Select's peek and verify
will then check if one of the present signalfds is affected.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Borrow a trick from strace to lessen occurrences of "??? => ???" in ldd
output. Specifically, if the module name isn't found in the usual place
in the mapped image, use the file handle we have to look up the name.
On sigwaitinfo or reading from a signalfd, signal processing sets up
signal handling via sigdelayed even if the handler address is NULL.
This doesn't have any impact on sigwaitinfo scenarios (or at least, I
wasn't able to come up with a reproducer) but it breaks signalfd
scenarios, where eventually a call to call_signal_handler from
sigdelayed will try to call the NULL function.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- If screen is alternated on console, cursor position is not restored
correctly in the case of xterm compatible mode is enabled. For example,
the shell prompt is shown at incorrect position after using vim.
This patch fixes this problem.
- The horizontal tab positions are broken after resizing console window.
This seems to be a bug of xterm compatible mode of windows console.
This workaround fixes this problem.
The default implementation of the fenv.h methods return
-EOPNOTSUP. Some of these have implementations appropriate
for soft-float.
The intention of the new fenv.h is that it be portable
and that architectures provide their own implementation
of sys/fenv.h.
This avoids collisions of shmat maps with Windows own datastructures
when allocating top-down.
This patch moves the mmap_allocator class definition into its
own files and just uses it from mmap and shmat.
Adding default winvar 'PATH=C:\cygwin64\binZ' to an environment that is
already allocated for 'SYSTEMROOT=ZWINDIR=Z', we need to count that
trailing (Z)ero as well. Otherwise we trigger this assertion failure:
$ /bin/env -i SYSTEMROOT= WINDIR= /bin/env
assertion "(s - envblock) <= tl" failed: file "/home/corinna/src/cygwin/cygwin-3.0.7/cygwin-3.0.7-1.x86_64/src/newlib-cygwin/winsup/cygwin/environ.cc", line 1302, function: char** build_env(const char* const*, WCHAR*&, int&, bool, HANDLE)
Aborted (core dumped)
When the exec family of functions is called for a script-like
file, the av::setup function handles the exec[vl]p case as
well. The execve case for files not starting with a she-bang
is handled first by returning ENOEXEC. Only after that, the
file's executability is checked.
This leads to the problem that ENOEXEC is returned for non-executable
files as well. A calling shell interprets this as a file it should try
to run as script. This is not desired for non-executable files.
Fix this problem by checking the file for executability first. Only
after that, follow the other potential code paths.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
This patch supplies an implementation of the CPU_SET(3) processor
affinity macros as documented on the relevant Linux man page.
There is a mostly superset implementation of cpusets under newlib's
libc/sys/RTEMS/include/sys that has Linux and FreeBSD compatibility
and is built on top of FreeBSD bitsets. This Cygwin implementation
and the RTEMS one could be combined if desired at some future point.
Do not attach to the child before it was successfully initialized, or we
would need more sophisticated cleanup on child initialization failure,
like suppressing SIGCHILD delivery with multiple threads ("waitproc")
involved.
Improves "Cygwin: fork: Remember child not before success.",
commit f03ea8e1c5, which leads to fork
problems if cygserver is running:
https://cygwin.com/ml/cygwin-patches/2019-q2/msg00155.html
During fork, the child process requires the process table to be
initialized for fixup_shms_after_fork, while still allowing subsequent
dlls.load_after_fork to fail silently (for when the "forkable" hardlinks
are not created yet).
pinfo::remember not performing reattach anymore requires explicit
pinfo::reattach now where appropriate.
Prepares to improve "Cygwin: fork: Remember child not before success."
commit f03ea8e1c5, which leads to fork
problems if cygserver is running:
https://cygwin.com/ml/cygwin-patches/2019-q2/msg00155.html
Introducing an independent Cygwin PID introduced a regression:
The expectation is that the myself pinfo pointer always points to a
specific address right in front of the loaded Cygwin DLL.
However, the independent Cygwin PID changes broke this. To create
myself at the right address requires to call init with h0 set to
INVALID_HANDLE_VALUE or an existing address:
void
pinfo::init (pid_t n, DWORD flag, HANDLE h0)
{
[...]
if (!h0 || myself.h)
[...]
else
{
shloc = SH_MYSELF;
if (h0 == INVALID_HANDLE_VALUE) <-- !!!
h0 = NULL;
}
The aforementioned commits changed that so h0 was always NULL, this way
creating myself at an arbitrary address.
This patch makes sure to set the handle to INVALID_HANDLE_VALUE again
when creating a new process, so init knows that myself has to be created
in the right spot. While at it, fix a potential uninitialized handle
value in child_info_spawn::handle_spawn.
Fixes: b5e1003722 ("Cygwin: processes: use dedicated Cygwin PID rather than Windows PID")
Fixes: 88605243a1 ("Cygwin: fix child getting another pid after spawnve")
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
_pinfo::set_ctty sets myself's pgid to the ctty pgid if the process has
been started from a non-Cygwin process. This isn't the right thing to
do when started from GDB. GDB starts the application via standard
Windows means, not via Cygwin fork/exec, so it's treated as being
a non-Cygwin parent.
But we want the app running in it's own process group. So skip this
step when running under a debugger
Signed-off-by: Corinna Vinschen <corinna-cygwin@cygwin.com>
Return -1 with EINVAL if pgid < 0.
Previously tcsetpgrp() would blindly go ahead and set the pgid of the
controlling terminal to a negative value, causing later calls to
various functions to fail.
For example, gdb has code like the following:
tcsetpgrp (0, getpgid (inf->pid));
If getpgid (inf->pid) fails (returns -1), then this code would set the
pgid of fd 0 to -1, so that some later calls to getpgid() would also
return -1. This caused the problem reported here:
https://cygwin.com/ml/cygwin/2019-07/msg00166.html.
So far negative values were denoting files, positive values
denoting directories. We should prefer a less error prone
method. Redefine virtual_ftype_t to contain only positive
values and replace checks for negativ or positive values with
inline functions virt_ftype_isfile() and virt_ftype_isdir().
Drop outdcated comments referring to numerical virtual_ftype_t
values.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
commit 2607639992 "Improve error handling in /proc/[pid]/
virtual files." changed the return value of the /proc/PID
formatting functions to return -1 instead of 0 in the error
case to allow a filesize of 0.
The patch neglected to change this behaviour for /proc/PID/fd
content. This patch fixes that.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Change path_conv::is_lnk_special() so that it returns false on socket
files.
is_lnk_special() is called by rename2() in order to deal with special
files (FIFOs and symlinks, for example) whose Win32 names usually have
a ".lnk" suffix. Socket files do not fall into this category, and
this change prevents ".lnk" from being appended erroneously when such
files are renamed.
Remove a now redundant !pc.issocket() from fhandler_disk_file::link().
It is used only once, and the name is supposed to suggest "device that
is not based on the filesystem". This intended meaning is clearer if
we just replace is_auto_device() by its definition at the place where
it's used.
The sigpending mechanism failed to check if the pending signal was a
process-wide signal, or a signal for the curent thread. Fix that by
adding a matching conditional to wait_sig's __SIGPENDING code.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
So far sig_send's return type is int. The problem with this is
that sig_send returns a sigset_t on __SIGPENDING, and sigset_t
is defined as long type. So the function only returns the lower
32 bit of sigset_t, which is fine on 32 bit, but casts away the
pending RT signals on 64 bit.
Fix this by changing the return type of sig_send to sigset_t, so
as not to narrow down the sigset when returning from handling
__SIGPENDING. Make sure to cast correctly in all invocations
of sig_send.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Have sched_getaffinity() interface like glibc's, and provide an
undocumented internal interface __sched_getaffinity_sys() like the Linux
kernel's sched_getaffinity() for benefit of taskset(1).
Add a function timerfd_tracker::enter_critical_section_cancelable,
which is like enter_critical_section but honors a cancel event. Call
this when a timer expires while the timerfd thread is in its inner
loop. This avoids a deadlock if timerfd_tracker::dtor has entered its
critical section and is trying to cancel the thread. See
https://cygwin.com/ml/cygwin/2019-06/msg00096.html.
This patch set implements the Linux syscalls sched_getaffinity,
sched_setaffinity, pthread_getaffinity_np, and pthread_setaffinity_np.
Linux has a straightforward view of the cpu sets used in affinity masks.
They are simply long (1024-bit) bit masks. This code emulates that view
while internally dealing with Windows' distribution of available CPUs among
processor groups.
Make it a manual reset event. It's only used once to allow a reader
to open, and there's no reason to ever reset it. Defensively set it
when a client connection is recorded, even though it should be set by
the writer that connected.
Call NtReadFile directly instead of calling fhandler_base::raw_read.
In addition to being simpler, this gives us access to the return value
from NtReadFile.
Add a method fifo_client_handler::pipe_state that queries Windows for
the state of a pipe instance. Use this to help terminate the
listen_client thread cleanly.
If the last client handler is useless, delete it instead of declaring
it invalid.
fhandler_fifo::close could be called from a signal handler or another
thread at a time when another function is holding the fifo_client
lock. This could prevent the listen_client thread from acting on the
thread termination event. Avoid a deadlock by calling
fifo_client_unlock at the beginning of fhandler_fifo::close.
libX11 provides <X11/Xlocale.h>. The build of libX11 itself adds
include/X11 to the compiler's include path. This results in a name
collision with /usr/include/xlocale.h on case-insensitive filesystems.
Commit 90e35b1eb3 renamed sys/_locale.h to xlocale.h in March 2017 under
the assumption that we should provide the locale_t type in the same file
as on Linux, FreeBSD, and Darwin.
A few weeks later (June 2017), glibc removed the xlocale.h file in favor
of bits/types/locale_t.h, which shouldn't be included directly anyway.
For reference and the reasoning, see
https://sourceware.org/git/?p=glibc.git;a=commit;h=f0be25b6336d
Given the above, revert 90e35b1eb3 and
fix additional usage of xlocale.h.
32 bit Cygwin performs a POSIX-compatible mapping after EOF which
is not supported in this form on Windows. The 64 bit Windows
kernel never supported the AT_ROUND_TO_PAGE mapping flag, so we
couldn't page-aligned map the space right after the file's EOF.
So mapping beyond EOF was disabled in 64 bit Windows and WOW64.
However, if mmap works, a matching munmap should work as well,
*and* it should not accidentally unmap unrelated memory.
Therefore we enable mapping beyond EOF on 64 bit as well. Since
that mapping is always 64K aligned, the are between the last file
page and the next 64K allocation boundary will be unallocated.
There's no way around that.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
When using NtCreateFile when creating a directory that already exists,
it will correctly return 'STATUS_OBJECT_NAME_COLLISION'.
However using this function to create a directory (and all its parents)
a normal use would be to start with mkdir(‘/cygdrive/c’) which translates
to ‘C:\’ for which it'll instead return ‘STATUS_ACCESS_DENIED’.
An increasing number of tools are being included in Windows which have the
same names as those included in Cygwin packages. Indicating which one is
first in PATH can be helpful in diagnosing behavioural discrepencies
between them.
Also, fix the alphabetization of ssh.
64 bit Windows started out with a 44 bit address space due to a
restriction of the AMD64 CPUs at the time. Starting with Windows
8.1, these CPUs are not supported anymore and Windows switched to
the full 48 bit address space supported by AMD64.
Cygwin didn't follow suit yet so mmaps are still restricted to
the lower 44 bit address space. Fix that by using a system-specific
upper address for mmap allocations, 44 bit up to Windows 8, 48 bit
starting with Windows 8.1.
While at it, move the heap by another 8 Gigs to leave some space
for a potential extension of DLL address space, and restrict the
mmap lower address so the heap can grow to 32 Gigs before colliding
with mmaps.
Do not remember the child before it was successfully initialized, or we
would need more sophisticated cleanup on child initialization failure,
like cleaning up the process table and suppressing SIGCHILD delivery
with multiple threads ("waitproc") involved. Compared to that, the
potential slowdown due to an extra yield () call should be negligible.
Pause the child process after performing fork fixups even if there were
no dynamically loaded dlls with extra data/bss transfers to wait for.
This allows the parent process to cancel the current fork call even if
the child process was successfully initialized already.
This is a preparation for when the parent does remember the child no
earlier than after successful child initialization.
Querying the ntlength and existence of the /var/run/cygfork directory in
the very first Cygwin process should not use nt_max_path_buf, as that
one is used by dll_list::alloc already.
NtQueryVirtualMemory for MemorySectionName may return some old path even
if the process was just started, for when some directory in between was
renamed - maybe because the NT file cache is hot for the old path still.
This was seen during gcc bootstrap, returning a MemorySectionName of
".../gcc/xgcc.exe" even if started as ".../prev-gcc/xgcc.exe", where the
directory rename from "gcc" to "prev-gcc" was done the moment before.
As we stat the module's real file right after loading now, there is no
point in using NtQueryVirtualMemory with MemorySectionName any more, and
we can use what GetModuleFileName returned instead.
-Add vendor identification
-Support in get_cpu_cache
Background:
Chengdu Haiguang IC Design Co., Ltd (Hygon) is a Joint Venture
between AMD and Haiguang Information Technology Co.,Ltd., aims at
providing high performance x86 processor for China server market.
Its first generation processor codename is Dhyana, which
originates from AMD technology and shares most of the
architecture with AMD's family 17h, but with different CPU Vendor
ID("HygonGenuine")/Family series number(Family 18h).
Related Hygon kernel patch can be found on:
http://lkml.kernel.org/r/5ce86123a7b9dad925ac583d88d2f921040e859b.1538583282.git.puwen@hygon.cn
Signed-off-by: Jinke Fan <fanjinke@hygon.cn>
There's no longer a need to consider the connect_evt after fork/exec.
After stopping the listen_client thread, all client handlers should be
in the fc_connected or fc_invalid states, so their connect_evt members
won't be used again.
Also remove code in fhandler_fifo::dup that just repeats things
already done in stop_listen_client.
Add a method fhandler_fifo::check_listen_client_thread that checks
whether the thread is running. Use it in raw_read instead of just
testing the handle listen_client_thr.
On exit from the listen_client thread, make sure there's no pending
FSCTL_PIPE_LISTEN request. Otherwise we might get a client connection
after restarting the thread, and we won't have a handle for
communicating with that client.
Remove the retry loop in the case of STATUS_PIPE_LISTENING; that case
shouldn't occur.
Remove the now-unused fc_connecting value from
fifo_client_connect_state.
It's now up to the caller to pass a handle to open_pipe and, if
desired, to call set_handle on return.
This will be useful for a future commit, in which we will open a
client connection without setting an io_handle.
When opening a duplexer, open a client connection to the first client
handler. Previously we gave the duplexer a bogus write handle, which
was just a duplicate of the first client handler's handle. This meant
that we had a pipe server with no clients connected, and all I/O
attempts failed with STATUS_PIPE_LISTENING.
Extend the last fcntl change to duplexers.
Remove a now unused fifo_client_handler constructor, as well as the
long unusued method fifo_client_handler::connect.
Don't create the pipe in duplex mode; the server handle will only be
used for reading.
NtQueryVirtualMemory for MemorySectionName does not reliable return the
changed dll file name when another process does move the file around,
and we may end up creating forkable hardlinks to wrong dll files.
So query the file id when loading the dll rather than before fork.
Make stat_real_file_once a method of struct dll, to be more flexible on
where to use. Also, debug print memory section name queried for a dll.
This is a preparation to query the file id when loading the dll.
The blocking mode of the Windows pipe underlying a writer is set to
match that of the writer itself when the latter is opened. Define
fhandler_fifo::fcntl to keep the pipe and the writer in sync if the
blocking mode is changed via fcntl.
* Change default fallback for failed winsock error -> POSIX error
mappings to EACCES, which is a valid errno for more socket-related
syscalls.
* Added a few previously missing entries to the wsock_errmap table
that have obvious POSIX errno.h analogues.
Add methods need_fixup_before, init_fixup_before, and
fixup_before_fork_exec to accomplish this. Stopping the thread makes
sure that the client handler lists of the parent and child remain in
sync while the forking/execing is in progress.
Don't use the same i/o handle for the first client handler as is used
for the fhandler itself; this can lead to a later attempt to close the
same handle twice. Instead use a duplicate.
* Pre-release version still reporting kernel version 6.4.
* Windows 10 1511 is out of support since 2017-10-10.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Define fhandler:fifo::fixup_after_exec, which sets listen_client_thr
and lct_termination_evt to NULL. This forces the listen_client thread
to restart on the first attempt to read after an exec. Previously the
exec'd process could hang in fhandler_fifo::raw_read.
Remove fifo_client_handler::connect and move its code into
listen_client_thread. That way we can check the return status when a
client handler's connect_evt is signaled. Previously we incorrectly
assumed there was a successful connection.
Also simplify listen_client_thread in the following ways:
- Replace fhandler_fifo::disconnect_and_reconnect by a new
delete_client_handler method. Now we just delete invalid client
handlers rather than trying to re-use them.
- Try to maintain a client handler list that consists of connected
client handlers and exactly one that is listening for a connection.
This allows us to call WaitForMultipleObjects with only two wait
objects.
- Remove 'dummy_evt' from the fifo_client_handler struct; it is no
longer needed.
- On exit from listen_client_thread, delete the "extra" (listening)
client handler. Otherwise there could be a connection that doesn't
get recorded in the client handler list. This could happen when a
file descriptor is being duplicated.
Don't set the write end of the pipe to non-blocking mode if the FIFO
is opened in blocking mode.
In fhandler_fifo::raw_write in blocking mode, wait for the write to
complete rather than returning -1 with EAGAIN.
If the amount to write is large, write in smaller chunks (of size
determined by a new data member max_atomic_write), as in
fhandler_base_overlapped.
For convenience, add two new NTSTATUS codes, STATUS_THREAD_SIGNALED
and STATUS_THREAD_CANCELED, to ntdll.h.
After copyto is called, make the new fhandler's pipe_name point to the
new fhandler's pipe_name_buf, which is a *copy* of the old fhandler's
pipe_name_buf. Previously, get_pipe_name would return the wrong
result after a clone/dup, causing create_pipe_instance and open_pipe
to fail.
Also, stop the listen_client thread when cloning. Otherwise the
thread can keep accepting connections that the cloned fhandler won't
know about.
Do this via a new method fhandler_fifo::stop_listen_client, extracted
from fhandler_fifo::close.
Make read_ready a manual reset event. It should always be set shortly
after startup of the listen_client thread and remain set until the
thread terminates. (We don't want writers to connect without being
recorded in the client handler list.)
Remove the unnecessary code that checks for read_ready when a reader
is opening.
Add data members 'reader', 'writer', and 'duplexer' to the
fhandler_fifo class. Set them in fhandler_fifo::open. ('duplexer'
replaces the previous '_duplexer'.)
This will be useful in later commits.
The word "client" suggests something that holds a handle to the client
side of the pipe (in Windows terminology). But our
fifo_client_handlers hold a handle the server side of the pipe, and
they *connect* to clients.
Rather than newest last write time of all dlls loaded, use the forking
process' windows pid and windows thread id as directory name to create
the forkable hardlinks into. While this may create hardlinks more
often, it does avoid conflicts between dlls not having the newest last
write time.
* Changes error handling to allow /proc/[pid]/ virtual files to be
empty in some cases (in this case the file's formatter should return
-1 upon error, not 0).
* Better error handling of /proc/[pid]/stat for zombie processes:
previously trying to open this file on zombie processes resulted
in an EINVAL being returned by open(). Now the file can be read,
and fields that can no longer be read are just zeroed.
* Similarly for /proc/[pid]/statm for zombie processes.
* Similarly for /proc/[pid]/maps for zombie processes (in this case the
file can be read but is zero-length, which is consistent with observed
behavior on Linux.
- After 24 bit color support patch, arrow keys and function keys
do not work properly in native console applications if they
are started in cygwin console. This patch fixes this issue.
In case SA_SIGINFO flag is given, the signal handler may change
the context and the application is supposed to pick up from the
changed context. So far we don't do that, so the context given
to the signal handler is basically read-only, unless the signal
handler calls setcontext or swapcontext.
For a start, restore the thread's signal mask from the uc_sigmask
value of the context given to the signal handler.
If that's feasible for Cygwin, we restore the entire context from
the context changed by the signal handler in a followup patch.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
commit d1be0a59d4,
"Cygwin: winpids: Fix getting process multiple times"
fixed duplicate processes in ps -W output, but it fixed
the symptom, not the cause. It also didn't fix the problem
that the `ps' process itself may show up twice in its own
output.
This patch fixes it. The spawn worker only deleted the
"winpid.PID" symlink of the current process if the child is
a non-Cygwin process, under the assumption that the exec'ing
process exits anyway. However, the Window in which both
winpid.PID symlinks point to the same cygpid.PID area is just
too long. The spawn worker now also deletes its own winpid.PID
symlink if the exec'ed process is a Cygwin process.
Additionally the fix from d1be0a59d4
is now performed on the calling process, too.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- Add 24 bit color support using xterm compatibility mode in
Windows 10 1703 or later.
- Add fake 24 bit color support for legacy console, which uses
the nearest color from 16 system colors.
In dll_crt0_0, both threadinterface->Init and sigproc_init allocate
windows object handles using unpredictable memory regions, which may
collide with dynamically loaded dlls when they were relocated.
Make fhandler_base::clear_readahead virtual, and implement
fhandler_fifo::clear_readahead. This is called by
dtable::fixup_after_exec; it clears the readahead in each client.
Starting w/ the intro of S4U, seteuid32() calls lsaprivkeyauth(), then
s4uauth(). s4uauth calls LsaRegisterLogonProcess().
LsaRegisterLogonProcess fails w/ STATUS_PORT_CONNECTION_REFUSED, if the
proper privileges are not held.
Because of RtlNtStatusToDosError(), this status would be mapped to
ERROR_ACCESS_DENIED, which in turn would map to EACCES. Therefore it is
useless to add this status to errmap[] (errno.cc), as s4auauth() should
return EPERM as errno here (i.e. if process is not privileged).
Hence the kludge.
Before the intro of S4U, seteuid32() called lsaprivkeyauth(), then
lsaauth(), then create_token(). Before the intro of Vista, the latter
would have called NtCreateToken().
NtCreateToken() would have failed w/ STATUS_PRIVILEGE_NOT_HELD for a
process w/o the proper privileges. In that case, calling seteuid32()
would have returned EPERM (as required).
Since the intro of Vista, and if the process had been started from an
UNelevated shell, create_token() does NOT reach NtCreateToken()!
As create_token() failed to properly set errno in that case, calling
seteuid32() would return errno as set by lsaauth(), i.e. EACCES, not
in agreement w/ Posix (a bug which was present for years).
(lsaauth() called LsaRegisterLogonProcess() which would fail)
If a FIFO is opened with O_RDWR access, create the pipe with
read/write access, and make the first client have the handle of that
pipe as its I/O handle.
Adjust fhandler_fifo::raw_read to account for the result of trying to
read from that client if there's no data.
fhandler_fifo::clone called fhandler_base::clone on each client
fhandler. But those fhandlers are actually fhandler_fifo objects, so
when fhandler_base::clone calls copyto, it's actually
fhandler_fifo::copyto that gets called. This can lead to mysterious
crashes.
Fix this by simply calling clone (which translates to
fhandler_fifo::clone) on each client fhandler.
Add static functions peek_fifo, thread_fifo, start_thread_fifo, and
fifo_cleanup to select.cc. These are based on the corresponding pipe
functions, the main difference being that peek_fifo loops through the
connected clients to see if any of them have data available for
reading.
Add the fhandler_fifo methods select_read, select_write, and
select_except.
Add accessor methods get_nclients, get_handle, and is_connected that
are needed by peek_fifo.
Add a hit_eof method that tries to detect whether any clients are
connected. Before concluding that there are none, it gives the
listen_client thread time to update the client data.
Introduce a 'fifo_client_handler' structure that can be used by a
reader to communicate with a writer using an instance of the named
pipe. An fhandler_fifo opened for reading creates a thread that does
the following:
- maintains a list of fifo_client_handlers
- listens for_clients trying to connect
- creates new pipe instances as needed so that there's always at
least one available for connecting.
The pipe instances are initially created in blocking mode, but they
are set to be non-blocking after a connection is made.
fhandler_fifo::raw_read now loops through the connected clients and
reads from the first one that has data available.
New fhandler_fifo methods: add_client, listen_client,
listen_client_thread, check_listen_client_thread.
Replace the create_pipe method by create_pipe_instance, which allows
unlimited pipe instances.
New helper functions: create_event, set_pipe_non_blocking.
Make fhandler_fifo a derived class of fhandler_base instead of
fhandler_base_overlapped.
Replace the create_pipe macro, which is based on
fhandler_pipe::create, by new create_pipe and open_pipe methods.
These use NT functions instead of Win32 functions. Replace fifo_name
by get_pipe_name, which returns a pointer to a UNICODE_STRING.
Remove the fnevent macro, which would now be needed only once.
Add a raw_write method, adapted from fhandler_base::raw_write.
Adapt all functions to the changes above.
Switching to Cywin-only PIDs introduced a new problem when collecting
Cygwin processes for `ps -W': A process can show up multiple times
again, if the Cygwin procinfo has been opened for a just execing
process. The execed process then shows up twice, once as Cygwin
process, but with the wrong Windows PID of the execing process,
once as Windows-only process.
The mechanism used to exclude these stray processes didn't work with
the new Cygwin pid handling anymore. To fix this
* check if the incoming Windows PID is the same as the PID in the
procinfo. If not, we have the PID of the execing process while
procinfo was already changed,
* always check if the process has already been handled, not only
for processes we got a procinfo for,
* simplify adding pid to pidlist since pid is now always correct.
While at it, fix comments and comment formatting.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
strace only printed the Windows PID in event output so far.
Especially now that Windows and Cygwin PID are decoupled, the
strace user might like to see the Cygwin pid in event output as
well. However, at process startup, the process might not have
a Cygwin PID yet.
To mitigate this, always print the Windows PID and only add the
Cygwin pid if it exists.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
commit c0d7d3e1a2 removed the usage of the
LCMAP_BYTEREV flag in the call to LCMapStringW to workaround a strange
bug in LCMapStringW. This patch didn't take a userspace call of
wcsxfrm{_l} with NULL buffer and 0 size to evaluate the required buffer
size into account. This introduced a crash trying to byte swap the
NULL buffer. This patch fixes that problem.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
3.0.0 changed uname but missed to align /proc/version
which then used the old uname function on the new uname
struct.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Always use NtQuerySystemInformation(SystemProcessIdInformation).
This drops two code paths calling NtQueryInformationProcess or
GetModuleFileNameExW and only requires to open the process
to fetch system time info.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
There's a long-standing bug in ps -W. It only shows processes which ps
can open with PROCESS_QUERY_LIMITED_INFORMATION permissions. However,
that fails for a lot of system processes. Due to that, output is
basically restricted to processes in the same session, as well as Cygwin
processes... which isn't *quite* what ps -W was supposed to do.
Basically we only need to open the process to fetch the image name. If
that fails, utilize the undocumented SystemProcessIdInformation info
class introduced with Windows Vista, which allows to fetch the image
name by specifying the PID. Restructure the code a bit.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
When logging in via ssh with an unprivileged account,
PdhAddEnglishCounter returns with status 0x800007D0,
PDH_CSTATUS_NO_MACHINE. We didn't find any workaround
but the changes to improve debugging output may help
in future. Using UNICODE instead of ANSI functions is
a result of trying to fix this problem.
Also drop the prototype workaround for PdhAddEnglishCounterA.
It's not required anymore since Mingw-w64's pdh.h catched up.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Create process with standard rights, plus
PROCESS_QUERY_LIMITED_INFORMATION for authenticated users. This
allows to fetch basic process information and thus /proc/<PID>/stat
to succeed on foreign processes.
While at it, fix formatting in CreateProcess calls.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
There's no good reason to return blank if some of the info
couldn't be collected. Drop useless call collecting
SystemProcessorPerformanceInformation. Always return some
valid start_time, even if we couldn't collect ProcessTimes.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The OpenProcess call to generate /proc/<PID>/stat info requests
PROCESS_VM_READ, but that's not required. Drop it.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Creating /proc/<PID>/cmdline requires permissions to communicate
with the target process via its signal pipe. If that fails, the
output is "<defunct>" which doesn't make sense most of the time.
Rather, call format_process_exename in this case to get more useful
process name info, albeit not the full cmdline.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The winpid symlinks got created with no query permissions, so
only admins could see all Cygwin processes. Create symlinks
so everyone has query permissions instead.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Canceling the timer thread runs under lock. The thread uses the same
lock to guard its timer_tracker struct access. If the timing is bad,
timer_settime or timer_delete grab the lock at the same time, the timer
expires. In the end, cancel waits for the thread sync while the thread
waits for ther lock to be released.
Fix this by not waiting for the thread sync under lock.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
On setting the timer, the thread is accidentally only canceled when
disarming the timer. This leaks one thread per timer_settimer call.
Move the thread cancellation where it belongs.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
We don't support setting groups via /etc/groups anymore. Also, the
initgroups group list is created via S4U, so we have "Interactive" vs.
"Network" token, an artificial and entirely irrelevant difference.
So, "verifying" the lsaprivkeyauth token may lead to rejecting a prefectly
valid token. Just remove the verify_token call.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Revert "Cywin: user profile: unload impersonation user profile on exit"
Revert "Cygwin: seteuid: allow inheriting impersonation user profile handle"
Revert "Cygwin: user profile: add debug output to unload_user_profile"
Revert "Cygwin: user profile: Make an effort to unload unused user profiles"
This reverts commit bcb33dc4f0.
This reverts commit dd3730ed9c.
This reverts commit 8eee25241e.
This reverts commit 71b8777a71.
This patchset actually results in the following problem:
- After a couple of ssh logon/logoff attempts, an interactive session
of the same user loging in, is broken.
Apparently UnloadUserProfile manages to unload the user's profile
even while a parallel interactive session still uses the user's
profile.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Per MSDN VirtualQueryEx requires PROCESS_QUERY_INFORMATION.
Testing showed that PROCESS_QUERY_LIMITED_INFORMATION is sufficient
since Windows 8.1. The assumption that Windows 8 is the same as
Windows 8 was not correct, it requires PROCESS_QUERY_INFORMATION
as well.
Fix that by splitting the Windows 8 wincaps into one for Windows 8
and one for Windows 8.1. Set needs_query_information for Windows 8.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
If the user domain is the primary domain, LDAP is supposed to
use the default naming context. This is accomplished by setting
domain name to NULL in the call to cyg_ldap::fetch_ad_account.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
cyg_ldap::fetch_ad_account creates a naming context from the
incoming domain, if it's not NULL. The algorithm overwrites
dots with \0 in domain while creating the naming context, but
neglects to restore the dots.
Fix that by never overwriting the incoming domain name.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- feenableexcept,fedisableexcept, fegetexcept are GNU-only
- fegetprec, fesetprec are Solaris, use __MISC_VISIBLE
- _feinitialise is Cygwin-internal only
- Replace self-named FP precision values to values from
http://www.open-std.org/jtc1/sc22//WG14/www/docs/n752.htm
as used by Solaris.
- Change return value of fesetprec to adhere to the above document
and Solaris.
- Document fegetprec, fesetprec as Solaris functions, not as GNU
functions
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
...before calling any of its method. It's no safe bet that
it's already initialized when calling s4uauth and adding it
to load_user_profile certainly doesn't hurt.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
In case of a local machine account login, pi.lpProfilePath points
to the buffer returned by NetUserGetInfo, but NetApiBufferFree
is called prior to calling LoadUserProfileW. Fix by copying over
usri3_profile to the local userpath buffer, just as in the AD case.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
This never really worked. While at it, restructure code to
do common stuff only in one spot. Improve debug output.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Inspecting the content of case-sensitive directories
on remote machines results in lots of errors like
disappearing diretories and files, file not found, etc.
This is not feasible as default behaviour
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
A sleep is required on Windows 10 64 bit only before calling
RegisterClassW in the timerfd thread, and only when running
under strace. One of the child processes inheriting the timerfd
descriptor will get a STATUS_FLOAT_INEXACT_RESULT exception inside
of msvcrt.dll. It's apparently some timing problem. It occurs
in 4 out of 5 runs under strace only. WOW64 and Windows 7 64 bit
don't have this problem.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The share section was created using the PAGE_SIZE constant,
but PAGE_SIZE is 64K. Fix that by using wincap.page_size()
instead, which returns the desired actual page size of 4K.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
timerfd_tracker and timerfd_shared classes:
- Just because handles are shared, we don't have to store them in
shared memory. Move share handles into timerfd_tracker class.
- Drop shared instance counter since it's not required anymore.
timerfd_shared only stores the actual timer data.
- Drop timerfd_shared::create, just set clock id.
- Drop timerfd_shared::dtor, it's not required anymore.
- Drop timerfd_tracker::close, just call dtor where required.
- Rename timerfd_tracker::increment_instances to timerfd_tracker::dup.
It's the only reason it exists...
- timerfd_tracker::dtor now checks the non-shared pointers for NULL
before attempting to close them.
- timerfd_tracker::dtor handles decrementing the local instance count
by itself.
- Add a method timerfd_tracker::init_fixup_after_fork_exec to set
non-shared pointers to NULL. Together with the dtor patches it
fixes a problem with close_on_exec timerfd descriptors.
- Fix a bug in handling the thread synchronization event. It's
actually nice to create it before using it...
- Drop using sec_none{_nih} in InitializeObjectAttributes. It's
an unnecessary roundabout route just to get a NULL pointer.
- Slightly rework timechange window handling.
- Add more comments to explain what happens.
fhandler_timerfd:
- Drop cnew macro, it just hides what happens.
- fhandler_timerfd::fixup_after_exec now calls
timerfd_tracker::init_fixup_after_fork_exec first, so a subsequent
call to timerfd_tracker::dtor only works on valid handles.
- fhandler_timerfd::close directly calls timerfd_tracker::dtor now.
- Drop dtor call in fhandler_timerfd destructor.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
timerfd_tracker::fixup_after_fork_exec always tries to restore
the shared timer region at the same address as in the parent.
This is entirely unnecessary and wasn't intended, rather some
kind of copy/paste thinko. Fix that. Print NtMapViewOfSection
status code in api_fatal on failure for debugging.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The "optimized" condition to recognize an unarmed timer was plain
wrong. Replace it by checking the stored it_value against 0.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The child process needs access to the handle to be able to
unload it when switching user context.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Does this work? There's not much feedback given.
TODO: We might want to try unloading the user profile at process
exit as well, FWIW.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
curr_primary_token is either NO_IMPERSONATION or the external_token
or the internal_token, so it's never required to be closed by itself.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Commit 649911fb40 avoids the
calls to NetUserGetGroups and NetUserGetLocalGroups since
these can take a lot of time. The same problem potentially
occurs when loading the user profile. The code fetches
the roaming profile path calling NetUserGetInfo, which also
can be rather slow.
To avoid this problem, fetch the profile patch using LDAP.
Also, don't bail out early if the user's registry hive already
exists. This may result in outdated information.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
NetUserGetGroups and NetUserGetLocalGroups sometimes take a lot of time
(up to more than 2 mins) for no apparent reason.
Call s4uauth to generate an identification token for the user and fetch
the group list from there. This is *much* faster.
Keep the old code only for the sake of WOW64 on Vista and Windows 7,
which don't implement MsV1_0S4ULogon.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
s4uath was only callable to create an impersonation token so
far. Rework the function to allow creating an identification
token for informational purposes even from untrusted processes.
Take domainname and username instead of a passwd pointer to be
more multi-purpose.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Commit 4e34a39b5c made sure all user and
group names are case-correct, but it introduced a hefty performance hit
on starting the first Cygwin process.
Adding an ldap call for each AD group in a user token takes its toll in
bigger AD environments with lots of groups in a user token. Real-life
example: 300 groups w/ roundtrip time to the LDAP server of 0.25 secs
per call...
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Up to Vista CreateProcessAsUser only worked with primary tokens,
so convert S4U impersonation token to primary token. MSDN still
documents it that way, but actually an impersonation token is
sufficient since Windows 7.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Under WOW64 on 64 bit Windows 7, MsV1_0S4ULogon appears to be
unimplemented, probably under Vista as well. Re-enable
create_token method, to allow basic seteuid on W7 WOW64 and
Vista as well.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
for domain accounts we try KerbS4ULogon first, MsV1_0S4ULogon
second. But we only fetch the package id for the supporting
authentication package (Kerberos/MsV1_0) once at the start.
Duplicate LsaLookupAuthenticationPackage call and move into the
Kerb/MsV1_0 branches so that it fetches the correct package id
for the method we call next.
Curious enough this worked before. Apparently both methods
work with the MICROSOFT_KERBEROS_NAME_A package id. However,
requesting and using the right authentication package id is
the prudent thing to do.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
This reverts commit 7c34811440.
This potentially allows to circumvent OpenSSHs user/group name matching,
unless the Admin knows to add every local user twice or to use patterns,
e.g.:
Match user MACHINE+user,.+user
Match user *+user
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Commit c1023ee353 changed the way
path_conv::binmode() works. Rather than returning three states,
O_BINARY, O_TEXT, 0, it only returned 2 states, O_BINARY, O_TEXT. Since
mounts are only binary if they are explicitely mounted binary by setting
the MOUNT_BINARY flag, textmode is default.
This introduced a new bug. When inheriting stdio HANDLEs from native
Windows processes, the fhandler and its path_conv are created from a
device struct only. None of the path or mount flags get set this way.
So the mount flags are 0 and path_conv::binmode() returned 0.
After the path_conv::binmode() change it returned O_TEXT since, as
explained above, the default mount mode is textmode.
Rather than just enforcing binary mode for path_conv's created from
device structs, this patch changes the default mount mode to binary:
Replace MOUNT_BINARY flag with MOUNT_TEXT flag with opposite meaning.
Drop all explicit setting of MOUNT_BINARY. Drop local set_flags
function, it doesn't add any value.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
When recognizing a negative pid, optind is off by one. The
code correcting this has been erroneously removed by commit
8de660271f. Revert that.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The solution from commit 9a3cc77b2a
didn't work for foreign domain accounts. Rather than calling
LookupAccountSid we now use the info when we fetch it anyway
via LDAP or Net*GetInfo. Only in case of domain groups we have
to add an LDAP call explicitly.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Make sure a domain+username fits into the local name buffer.
The former buffer size didn't take adding a domain name to
a really_really_long_user_name into account.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
When looking up valid accounts by name, LookupAccountName returns
a SID and a case-correct domain name. However, the name was input
and LookupAccountName is case-insensitive, so the name is not
necessarily written the same way as in SAM or AD.
Fix that by doing a reverse lookup on the just fetched SID. This
fetches the account name in the correct case. Override the
incoming name with the case correct name from LookupAccountSid.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
This is a really old and crappy API, as the previous commit shows.
Use NtQueryInformationFile(FilePositionInformation) here instead.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
dtable::set_file_pointers_for_exec is called from
child_info_spawn::worker to move the file position of O_APPEND
files to EOF if the child is a native child.
However, this only works correctly for the first O_APPEND
file descriptor:
- set_file_pointers_for_exec calls SetFilePointer. The higher
4 bytes of the desired file offset are given to SetFilePointer
as pointer to a DWORD value. On return, SetFilePointer returns
the higher 4 bytes of the new file position in this DWORD.
- So for the second and subsequent descriptors the higher 4 byte
of the file position depend on what the actual file position
of the previous file has been set to:
- If the file is > 2 Gigs, the high offset will not be 0 anymore.
- If the desciptor points to a non-seekable file (i.e., a pipe
or socket), SetFilePosition returns an error and sets the high
position to -1.
Fix this by calling SetFilePointerEx instead, which does not
modify the incoming position value.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
When calling spawnve, in contrast to execve, the parent has
to create the pid for the child. With the old technique
this was simply the Windows pid, but now we have to inform
the child about its new pid.
Add a cygpid member to class child_info_spawn. Set it in
child_info_spawn::worker, just prior to calling CreateProcess
rather than afterwards. Overwrite cygheap->pid in
child_info_spawn::handle_spawn before calling pinfo::thisproc.
Make sure pinfo::thisproc knows the pid is already set by
setting the handle argument to INVALID_HANDLE_VALUE.
Also set procinfo->dwProcessId to myself_initial.dwProcessId
instead of to myself_initial.pid for clarity.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
When the current process has renamed (to bin) a readonly dll, we get
STATUS_TRANSACTION_NOT_ACTIVE for unknown reason when subsequently
creating the forkable hardlink. A workaround is to open the original
file with FILE_WRITE_ATTRIBUTES access, but that fails with permission
denied for users not owning the original file.
* forkable.cc (dll::create_forkable): Retry hardlink creation using the
original file's handle opened with FILE_WRITE_ATTRIBUTES access when the
first attempt fails with STATUS_TRANSACTION_NOT_ACTIVE.
* Rename cygwin_shared->prefer_forkable_hardlinks to
forkable_hardlink_support, with values
0 for Unknown, 1 for Supported, -1 for Unsupported.
Upon first dll loaded ever, dll_list::forkable_ntnamesize checks the
/var/run/cygfork directory to both exist and reside on NTFS, setting
cygwin_shared->forkable_hardlink_support accordingly.
* Replace enum forkables_needs by bool forkables_created: Set
to True by request_forkables after creating forkable hardlinks.
To avoid the need for each process to check the filesystem to detect
that hardlink creation is impossible or disabled, cache this fact in
shared memory. Removing cygfork directory while in use does disable
hardlinks creation. To (re-)enable hardlinks creation, the cygfork
directory has to exist before the first cygwin process does fork.
* forkable.cc (dll_list::forkable_ntnamesize): Short cut
forkables needs to impossible when disabled via shared memory.
(dll_list::update_forkables_needs): When detecting hardlink
creation as impossible (not on NTFS) while still (we are the
first one checking) enabled via shared memory, disable the
shared memory value.
(dll_list::request_forkables): Disable the shared memory value
when hardlinks creation became disabled, that is when the
cygfork directory was removed.
* include/cygwin/version.h: Bump CYGWIN_VERSION_SHARED_DATA 6.
* shared_info.h (struct shared_info): Add member
prefer_forkable_hardlinks. Update CURR_SHARED_MAGIC.
* shared.cc (shared_info::initialize): Initialize
prefer_forkable_hardlinks to 1 (Yes).
To support in-cygwin package managers, the fork() implementation must
not rely on .exe and .dll files to stay in their original location, as
the package manager's job is to replace these files. Instead, when the
first fork try fails, and we have NTFS, we use hardlinks to the original
binaries in /var/run/cygfork/ to create the child process during the
second fork try, along the main.exe.local file to enable the "DotLocal
Dll Redirection" feature for the dlls.
The (probably few) users that need an update-safe fork manually have to
create the /var/run/cygfork/ directory for now, using:
mkdir --mode=a=rwxt /var/run/cygfork
* child_info.h: Bump CURR_CHILD_INFO_MAGIC.
(enum child_status): Add _CI_SILENTFAIL flag.
(struct child_info): Add silentfail setter and getter.
* winsup.h (child_copy): Add bool silentfail parameter.
* cygheap.cc: Pass silentfail parameter to child_copy.
* dcrt0.cc: Ditto.
* dll_init.h (struct dll): Define public inline method forkedntname.
(struct dll_list): Declare private method find_by_forkedntname.
* dll_init.cc (struct dll_list): Implement find_by_forkedntname.
(dll_list::alloc): Use find_by_forkedntname when in load after fork.
(dll_list::load_after_fork_impl): Load dlls using dll::forkedntname.
* fork.cc (frok::parent): Set silentfail child info flag. Pass
silentfail parameter to child_copy. Use forkedntname of
dlls.main_executable.
(fork): When first dofork run failed and did not use forkables,
run dofork again with_forkables set to true.
(child_copy): Use debug_printf if silentfail is true,
system_printf otherwise.
In preparation to protect fork() against dll- and exe-updates, create
hardlinks to the main executable and each loaded dll in subdirectories
of /var/run/cygfork/, if that one exists on the NTFS file system.
The directory names consist of the user sid, the main executable's NTFS
IndexNumber, and the most recent LastWriteTime of all involved binaries
(dlls and main executable). Next to the main.exe hardlink we create the
empty file main.exe.local to enable dll redirection.
The name of the mutex to synchronize hardlink creation/cleanup also is
assembled from these directory names, to allow for synchronized cleanup
of even orphaned hardlink directories.
The hardlink to each dynamically loaded dll goes into another directory,
named using the NTFS IndexNumber of the dll's original directory.
* Makefile.in (DLL_OFILES): Add forkable.o.
* dll_init.h (struct dll): Declare member variables fbi, fii,
forkable_ntname. Declare methods nominate_forkable,
create_forkable.
(struct dll_list): Declare enum forkables_needs. Declare member
variables forkables_dirx_size, forkables_dirx_ntname,
forkables_mutex_name, forkables_mutex. Declare private methods
forkable_ntnamesize, prepare_forkables_nomination,
update_forkables_needs, update_forkables, create_forkables,
denominate_forkables, close_mutex, try_remove_forkables,
set_forkables_inheritance, request_forkables. Declare public
static methods ntopenfile, read_fii, read_fbi. Declare public
methods release_forkables, cleanup_forkables. Define public
inline method setup_forkables.
* dll_init.cc (dll_list::alloc): Allocate memory to hold the
name of the hardlink in struct dll member forkable_ntname.
Initialize struct dll members fbi, fii.
(dll_list::load_after_fork): Call release_forkables method.
* fork.cc: Rename public fork function to static dofork, add
with_forkables as bool pointer parameter. Add new fork function
calling dofork. (struct frok): Add bool pointer member
with_forkables, add as constructor parameter.
(frok::parent): Call dlls.setup_forkables before CreateProcessW,
dlls.release_forkables afterwards.
* pinfo.cc (pinfo::exit): Call dlls.cleanup_forkables.
* syscalls.cc (_unlink_nt): Rename public unlink_nt function to
static _unlink_nt, with 'shareable' as additional argument.
(unlink_nt): New, wrap _unlink_nt for original behaviour.
(unlink_nt_shareable): New, wrap _unlink_nt to keep a binary
file still loadable while removing one of its hardlinks.
* forkable.cc: New file.
Implement static functions mkdirs, rmdirs, rmdirs_synchronized,
stat_real_file_once, format_IndexNumber, rootname, sidname,
exename, lwtimename. Define static array forkable_nameparts.
(struct dll): Implement nominate_forkable, create_forkable.
(struct dll_list): Implement static methods ntopenfile,
read_fii, read_fbi. Implement forkable_ntnamesize,
Even for the main executable and cygwin1.dll store the file name as full
NT path. Create the child process using the main executable's file name
converted from the full NT path stored before.
* dll_init.cc (dll_list::alloc): Search for DLL_SELF type entry
with module name like for DLL_LINK, use full NT path to search
for DLL_LOAD type only. For DLL_SELF type do not indicate
having a destructor to be called.
(dll_list::find): Ignore DLL_SELF type entries.
(dll_list::init): Ditto. Call track_self method.
(dll_list::track_self): New.
(dll_list::load_after_fork): Call track_self method.
* dll_init.h (enum dll_type): Add DLL_SELF, for the main
executable and cygwin1.dll.
(struct dll_list): Declare private method track_self. Declare
member variable main_executable.
* fork.cc (frok::parent): Use ntname from dlls.main_executable
to create child process, converted to short path using
dll_list::buffered_shortname.
Store loaded dll's file name as full NT path.
* dll_init.h (struct dll): Rename member variable name to ntname.
(struct dll_list): Declare private static member variable
nt_max_path_buffer. Declare public static methods form_ntname,
form_shortname. Define public static methods nt_max_path_buf,
buffered_shortname.
(dll_list::operator []): Use PCWCHAR rather than const PWCHAR.
(dll_list::find_by_modname): Ditto.
* dll_init.cc (in_load_after_fork): Define earlier in file.
(struct dll_list): Rename member variable name to ntname.
Define nt_max_path_buffer variable.
Implement static methods form_ntname, form_shortname.
(dll_list::operator []): Use PCWCHAR rather than const PWCHAR.
(dll_list::find_by_modname): Ditto.
(reserve_at): Ditto.
(release_at): Ditto.
(dll_list::alloc): Use nt_max_path_buf method instead of local
buffer. Store module file name as full NT path, convert using
the form_ntname static method.
(dll_list::load_after_fork): Call load_after_fork_impl only when
reload_on_fork is set.
* fork.cc (frok::child): Call dlls.load_after_fork even without
need to dynamically load dlls.
(frok::parent): Move syscall_printf into the retry loop.
Trying to delete in-use executables and DLLs using
FILE_DISPOSITION_POSIX_SEMANTICS returns STATUS_CANNOT_DELETE.
Fall back to the former method if that error occurs to allow
unlinking these files.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The symlink target of /proc/PID/fd files pointing to pipes and
sockets are just artificial filenames referencing the object using
some internal number. The pipe open code expects a path specifying
process pid and the internal number so it access the right process
and pipe.
- Set the posix path of the pipe to the simple pipe name only,
as it shows up in /proc/PID/fd. A /proc/self prefix is just
as wrong as a /dev/fd prefix.
- Revert thinko in fhandler_pipe::open expecting the name as
/proc/self/fd/... In fact this should never happen.
- Fix up the path before re-opening the pipe instead.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The reopen code neglected to pass along the requested open
mode correctly. This may end up reopening the file with
incorrect access mask, or duplicating the wrong pipe handle.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Move TerminateProcess call into cleanup code to make sure child
doesn't linger in some border cases.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
When fork finally fails although both CreateProcess and creating the
"cygpid.N" shared memory section succeeded, we have to release that
shared memory section as well - before releasing the process handle.
Otherways we leave an orphan "cygpid.N" shared memory section, and any
subsequent cygwin process receiving the same PID fails to initialize.
* fork.cc (frok::parent): Call child.allow_remove in cleanup code.
- If the execve'ed process is a non-Cygwin process, we have to
create the matching winpid symlink and remove the old one
ourselves.
- If we spawn a child, the winpid symlink has to be maintained
by the child process, otherwise it disappears if the parent
process exits.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The arguments are not used anyway, so drop them. When called,
procinfo->dwProcessId is already set right, so we don't have
to access myself_initial.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
This may end up killing the wrong process. Only allow Cygwin PID.
Slightly clean up code: Remove outdated W95 considerations. Fix
a bug in commandline argument processing.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Since commit b5e1003722, native
Windows processes not started by Cygwin processes don't have a
Cygwin PID anymore. This breaks ps -W and kill -f <WINPID>.
Introduce MAX_PID (65536 for now).
Cygwin processes as well as native Windows processes started
from a Cygwin process get a PID < MAX_PID. All other native
Windows processes get a faked Cygwin PID >= MAX_PID.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Using the Windows PID as Cygwin PID has a few drawbacks:
- the PIDs on Windows get reused quickly. Some POSIX applications choke
on that, so we need extra code to avoid too quick PID reuse.
- The code to avoid PID reuse keeps parent process handles and
(depending on a build option) child processes open unnecessarily.
- After an execve, the process has a split personality: Its Windows PID
is a new PID, while its Cygwin PID is the PID of the execve caller
process. This requires to keep two procinfo shared sections open, the
second just to redirect process info requests to the first, correct
one.
This patch changes the way Cygwin PIDs are generated:
- Cygwin PIDs are generated independently of the Windows PID, in a way
expected by POSIX processes. The PIDs are created incrementally in
the range between 2 and 65535, round-robin.
- On startup of the first Cygwin process, choose a semi-random start PID
for the first process in the lower PID range to make the PIDs slightly
unpredictable. This may not be necessary but it seems kind of inviting
to know that the first Cygwin process always starts with PID 2.
- Every process not only creates the shared procinfo section, but also a
symlink in the NT namespace, symlinking the Windows PID to the Cygwin
PID. This drops the need for the extra procinfo section after execve.
- Don't keep other process handles around unnecessarily.
- Simplify the code creating/opening the shared procinfo section and
make a clear distinction between interfaces getting a Cygwin PID and
interfaces getting a Windows PID.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
If a process is just exiting, requesting memory info may fail
with STATUS_PROCESS_IS_TERMINATING. Right now the code just bails
out if fetching mem info fails. However, the rest of the info is
still valuable for procps, so just carry on.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
After creating a pthread, the stack gets moved to the desired memory
location. While the 32 bit thread wrapper copies the exception handler
information to the new stack (so we have at least *some* exception
handler present), the x86_64 code didn't perform any exception handler
magic. Fix that.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
VirtualQueryEx, called by fixup_mmaps_after_fork, requires
PROCESS_QUERY_INFORMATION permissions per MSDN. However, testing
shows that PROCESS_QUERY_LIMITED_INFORMATION is sufficient when
running the same code on Windows 8.1 or Windows 10. Fix the code
to give the forked child always PROCESS_QUERY_INFORMATION perms
on Windows Vista/7 and respective server releases.
Revert now unneeded patch to check_token_membership as well.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
POSIX requires that raise(3) is equivalent to
pthread_kill(pthread_self(), sig);
in multi-threaded applications. Our raise just called kill(sig).
Fix that.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Keeping an inheritable handle open results in that handle being
spilled over into grandchild processes, which is not desired.
Duplicate original parent handle into a non-inheritable one with
minimal SYNCHRONIZE permissions and close the original handle.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- Exec'ed/spawned processes don't need PROCESS_DUP_HANDLE. Remove that
permission from the parent handle.
- PROCESS_QUERY_LIMITED_INFORMATION doesn't work for Windows 7 if the
process is started as a service. Add PROCESS_QUERY_INFORMATION for
pre-Windows 8 in that case.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The version info only depends on the object files. This results
in the version info not being rebuild immediately if a source
file is changed. Rather, the version info is only rebuilt on the
next make run.
Fix that by making the version info build rule dependent on the
source files.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- This simple and official method replaces cyglsa and "create token"
methods. No network share access, same as before.
- lsaauth and create_token are disabled now. If problems crop up,
they can be easily reactivated. If no problems crop up, they
can be removed in a while, together with the lsaauth subdir.
- Bump Cygwin version to 3.0.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Takashi Yano
Ken Brown
Corinna Vinschen
Brian Inglis
Arseniy Lartsev
Mark Geisert
Anton Lavrentiev via cygwin-patches
Achim Gratz
Martin Storsjö
Joel Sherrill
Lavrentiev, Anton
Michael Haubenwallner
Corinna Vinschen
Ben Wijen
Yaakov Selkowitz
Jinke Fan
Erik M. Bray
J.H. van de Water