- PTY code which support pseudo console has a problem that causes
handle leaks. Four of these are bug in pty code, and the other
one seems to be a bug of Windows10. ClosePseudoConsole() fails
to close one internal handle. This patch fixes the issue.
- If two PTYs are opened in the same process and the first one
is closed, the helper process for the first PTY remains running.
This patch fixes the issue.
- Even with commit fe512b2b12, pty
still has a problem in ESC[?3h and ESC[?3l handling if invalid
sequence such as ESC[?$ is sent. This patch fixes the issue.
- Pseudo console clears console screen buffer if ESC[?3h or ESC[?3l
is sent. However, xterm/vt100 does not clear screen. This cause
mismatch between real screen and console screen buffer. Therefore,
this patch triggers redraw screen in that situation so that the
synchronization is done on the next execution of native app.
This solves the problem reported in:
https://www.cygwin.com/ml/cygwin-patches/2019-q4/msg00116.html
- Previously, pty cleared screen at startup for synchronization
between the real screen and console screen buffer for pseudo
console. With this patch, instead of clearing screen, the screen
is redrawn when the first native program is executed after pty
is created. In other words, synchronization is deferred until
the native app is executed. Moreover, this realizes excluding
$TERM dependent code.
- The autoload feature is used rather than GetModuleHandle(),
GetProcAddress() for CreatePseudoConsole(), ResizePseudoConsole()
and ClosePseudoConsole().
- Since calling system __loadlocale() caused execution error,
PTY used its own NLS function. The cause of the error has been
found, the corresponding code has been rewritten using system
function.
- Previously, input and output pipes were switched together between
the traditional pty and the pseudo console. However, for example,
if stdin is redirected to another device, it is better to leave
input pipe traditional pty side even for non-cygwin program. This
patch realizes such behaviour.
- If screen alternated while pseudo console switching, it sometimes
failed. This might happen when the output of the non-cygwin program
is piped to less. This patch fixes this issue.
- When the I/O pipe is switched to the pseudo console side, the
behaviour of Ctrl-C was unstable. This rarely happens, however,
for example, shell sometimes crashes by Ctrl-C in that situation.
Furthermore, Ctrl-C was ignored if output of non-cygwin program
is redirected to pipe. This patch fixes these issues.
- Forcibly attach to pseudo console in advance so that the error
messages by system_printf() are displayed to screen reliably.
This is needed when stdout is redirected to another pty. In this
case, process has two ptys opened. However, process can attach
to only one console. So it is necessary to change console attached.
- select() did not work correctly when both read and except are
polled simultaneously for the same fd and the r/w pipe is switched
to pseudo console side. This patch fixes this isseu.
- Pseudo console support introduced by commit
169d65a577 shows garbage ^[[H^[[J in
some of emacs screens. These screens do not handle ANSI escape
sequences. Therefore, clear screen is disabled on these screens.
- API hook used for pseudo console support causes slow down.
This patch limits API hook to only program which is linked
with the corresponding APIs. Normal cygwin program is not
linked with such APIs (such as WriteFile, etc...) directly,
therefore, no slow down occurs. However, console access by
cygwin.dll itself cannot switch the r/w pipe to pseudo console
side. Therefore, the code to switch it forcely to pseudo
console side is added to smallprint.cc and strace.cc.
- Pseudo console support introduced by commit
169d65a577 has some bugs which
cause mismatch between state variables and real pseudo console
state regarding console attaching and r/w pipe switching. This
patch fixes this issue by redesigning the state management.
- PTY uses Win32 API hook for pseudo console suppot. The function
hook_api() is used for this purpose and defined in fhandler_tty.cc
previously. This patch moves it into hookapi.cc.
- Support pseudo console in PTY. Pseudo console is a new feature
in Windows 10 1809, which provides console APIs on virtual
terminal. With this patch, native console applications can work
in PTYs such as mintty, ssh, gnu screen or tmux.
This code is where the AIO implementation is wired into existing Cygwin
mechanisms for file and device I/O: the fhandler* functions. It makes
use of an existing internal routine prw_open to supply a "shadow fd"
that permits asynchronous operations on a file the user app accesses
via its own fd. This allows AIO to read or write at arbitrary locations
within a file without disturbing the app's file pointer. (This was
already the case with normal pread|pwrite; we're just adding "async"
to the mix.)
This new function returns the name of the calling thread; works for both
cygthreads and pthreads. All calls to cygthread::name(/*void*/) replaced
by calls to mythreadname(/*void*/).
Bump GPLv2+ to GPLv3+ for some files, clarify BSD 2-clause.
Everything else stays under GPLv3+.
New Linking Exception exempts resulting executables from LGPLv3 section 4.
Add CONTRIBUTORS file to keep track of licensing.
Remove 'Copyright Red Hat Inc' comments.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
'man termios' says:
"A read(2) returns at most one line of input" in canonical mode.
On cygwin 2.5.1, read(2) returns all data in buffer if the buffer
size specified is large enough. This behaviour is correct in
noncanonical mode, but is not correct in canonical mode.
While checking this problem, I found a bug of tcflush(). tcflush()
flushes only partial data in the buffer. The patch also fixes this bug.
The patch has also been tested against the problem reported in
https://cygwin.com/ml/cygwin/2016-05/msg00318.html.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
* Makefile.in (DLL_OFILES): Add sec_posixacl.o.
(SUBLIBS): Add libacl.a
(libacl.a): New rule to create libacl.a.
* common.din: Export POSIX ACL functions as well as most libacl.a
extensions.
* fhandler.h (fhander_base::acl_get): New prototype.
(fhander_base::acl_set): Ditto.
(fhandler_disk_file::acl_get): Ditto.
(fhandler_disk_file::acl_set): Ditto.
* include/acl/libacl.h: New file.
* include/cygwin/version.h: Bump API minor version.
* include/sys/acl.h: Drop including cygwin/acl.h. Accommodate
throughout Cygwin. Add POSIX ACL definitions.
* sec_acl.cc: Include sec_posixacl.h. Replace ILLEGAL_UID and
ILLEGAL_GID with ACL_UNDEFINED_ID where sensible.
(__aclcheck): New internal acl check function to be used for
Solaris and POSIX ACLs.
(aclcheck32): Call __aclcheck.
(__aclcalcmask): New function to compute ACL_MASK value.
(__aclsort): New internal acl sort function to be used for Solaris
and POSIX ACLs.
(aclsort32): Call __aclsort.
(permtostr): Work directly on provided buffer.
(__acltotext): New internal acltotext function to be used for
Solaris and POSIX ACLs.
(acltotext32): Call __acltotext.
(__aclfromtext): New internal aclfromtext function to be used for
Solaris and POSIX ACLs.
(aclfromtext32): Call __aclfromtext.
* sec_posixacl.cc: New file implemeting POSIX ACL functions.
* sec_posixacl.h: New internal header.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
* fhandler_tty.cc (fhandler_pty_slave::open): Add S_IFCHR flag
in call to create_object_sd_from_attribute.
(fhandler_pty_slave::fstat): Ditto in call to get_object_attribute.
(fhandler_pty_slave::fchmod): Add an orig_mode flag and ditto for
both calls.
(fhandler_pty_master::setup): Ditto in call to
create_object_sd_from_attribute.
* security.cc (get_object_attribute): Never add S_IFCHR to mode
here. Let the caller decide.
(create_object_sd_from_attribute): Ditto.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- New, unified implementation of POSIX permission and ACL handling. The
new ACLs now store the POSIX ACL MASK/CLASS_OBJ permission mask, and
they allow to inherit the S_ISGID bit. ACL inheritance now really
works as desired, in a limited, but theoretically equivalent fashion
even for non-Cygwin processes.
To accommodate Windows default ACLs, the new code ignores SYSTEM and
Administrators group permissions when computing the MASK/CLASS_OBJ
permission mask on old ACLs, and it doesn't deny access to SYSTEM and
Administrators group based on the value of MASK/CLASS_OBJ when
creating the new ACLs.
The new code now handles the S_ISGID bit on directories as on Linux:
Setting S_ISGID on a directory causes new files and subdirs created
within to inherit its group, rather than the primary group of the user
who created the file. This only works for files and directories
created by Cygwin processes.
2015-05-29 Corinna Vinschen <corinna@vinschen.de>
Reapply POSIX ACL changes.
* utils.xml (setfacl): Show new option output.
(getfacl): Show new option output.
* sec_acl.cc (get_posix_access): Check for Cygwin "standard" ACL.
Apply umask, if so. Align comments.
* security.cc (set_created_file_access): Fix permission masking by
incoming requested file mode.
* sec_acl.cc (set_posix_access): Apply mask only in terms of execute bit
for SYSTEM and Admins group.
* sec_acl.cc (set_posix_access): Don't create DENY ACEs for USER and
GROUP entries if they are the same as USER_OBJ or GROUP_OBJ.
* fhandler.h (fhandler_pty_slave::facl): Add prototype.
* fhandler_tty.cc (fhandler_pty_slave::facl): New method.
(fhandler_pty_slave::fchown): Fix uid/gid handling.
* sec_acl.cc (set_posix_access): Drop superfluous class_idx variable.
Simplify and move around code in a few places. To improve ACL
readability, add r/w permissions to Admins ACE appended to pty ACL.
Add comment to explain Windows ACE Mask filtering being in the way of
creating a real CLASS_OBJ.
(get_posix_access): Fake CLASS_OBJ for ptys. Explain why.
* security.cc (get_object_attribute): Add S_IFCHR flag to attributes
when calling get_posix_access.
* sec_acl.cc (set_posix_access): Move merging group perms into owner
perms in case of owner == group after mask has been computed. Take
mask into account when doing so to avoid unnecessary ACCESS_DENIED_ACE.
* sec_acl.cc (get_posix_access): Only set saw_group_obj flag if we saw
the ACCESS_ALLOWED_ACE.
* fhandler_disk_file.cc (fhandler_disk_file::fchmod): Deliberatly
set GROUP_OBJ and CLASS_OBJ perms to new group perms. Add comment
to explain why.
* security.cc (set_created_file_access): Ditto.
* sec_acl.cc (set_posix_access): Replace previous patch. Return
EINVAL if uid and/or guid is invalid and not backed by an actual
Windows account.
* sec_acl.cc (set_posix_access): Workaround owner/group SIDs being NULL.
* sec_acl.cc (set_posix_access): Handle files with owner == group.
Rephrase switch statement checking against unfiltered a_type value.
(get_posix_access): Handle files with owner == group.
* sec_acl.cc (get_posix_access): Don't use GROUP_OBJ access to fix up
CLASS_OBJ mask on old-style ACLs. Fix a comment.
* sec_acl.cc (set_posix_access): Always make sure Admins have
WRITE_DAC and WRITE_OWNER permissions.
* security.h (create_object_sd_from_attribute): Drop handle parameter
from prototype.
* security.cc (create_object_sd_from_attribute): Drop handle parameter.
Just create the standard POSIXy security descriptor.
(set_object_attribute): Accommodate dropped paramter in call to
create_object_sd_from_attribute.
* fhandler_tty.cc: Ditto, throughout.
* fhandler_disk_file.cc (fhandler_disk_file::fchmod): Fix typo in
mask computation.
* fhandler.cc (fhandler_base::open_with_arch): Call open with mode
not umasked.
(fhandler_base::open): Explicitely umask mode on NFS here. Call new
set_created_file_access rather than set_file_attribute.
* fhandler_disk_file.cc (fhandler_disk_file::fchmod): Reimplement
setting permissions on filesystems supporting ACLs using the new
set_posix_access call.
(fhandler_disk_file::fchown): Ditto.
(fhandler_disk_file::mkdir): Call new set_created_file_access rather
than set_file_attribute.
* fhandler_socket.cc (fhandler_socket::bind): Don't umask here. Add
WRITE_OWNER access to allow writing group in case of SGID bit set.
Call new set_created_file_access rather than set_file_attribute.
* path.cc (symlink_worker): Call new set_created_file_access rather
than set_file_attribute.
* sec_acl.cc (searchace): Un-staticize.
(set_posix_access): New, complementary functionality to
get_posix_access.
(setacl): Implement in terms of get_posix_access/set_posix_access.
(get_posix_access): Add handling for just created files requiring
their first Cygwin ACL. Fix new_style recognition. Handle SGID
bit. For old-style ACLs, ignore SYSTEM and Administrators when
computing the {DEF_}CLASS_OBJ perms.
* security.cc (get_file_sd): Revamp comment. Change and (hopefully)
speed up inheritance processing for just created files.
(alloc_sd): Remove.
(set_security_attribute): Call set_posix_access instead of alloc_sd.
(get_object_attribute): Fix return value.
(create_object_sd_from_attribute): Call set_posix_access instead of
alloc_sd.
(set_file_attribute): Remove.
(set_created_file_access): New function implemented in terms of
get_posix_access/set_posix_access.
* security.h (set_file_attribute): Remove prototype.
(set_created_file_access): Add prototype.
(searchace): Ditto.
(set_posix_access): Ditto.
* syscalls.cc (open): Call open_with_arch with mode not umasked.
* sec_acl.cc: Change preceeding comment explaining new-style ACLs.
Describe how to generate deny ACEs in more detail. Accommodate the
fact that a NULL deny ACE is used for {DEF_}CLASS_OBJ, rather than
a special Cygwin ACE. Improve further comments.
(CYG_ACE_NEW_STYLE): Define.
(get_posix_access): Change from Cygwin ACE to NULL deny ACE. Fix
CLASS_OBJ handling to generate CLASS_OBJ and DEF_CLASS_OBJ from a single
NULL deny ACE if the inheritance flags say so.
* sec_helper.cc (well_known_cygwin_sid): Remove.
* security.h (well_known_cygwin_sid): Drop declaration.
* sec_acl.cc (CYG_ACE_ISBITS_TO_WIN): Fix typo.
(get_posix_access): Rename index variable from i to idx. Define only
once at top level.
* security.cc (add_access_allowed_ace): Drop unused parameter "offset".
Accommodate throughout.
(add_access_denied_ace): Ditto.
* sec_acl.cc: Accommodate above change throughout.
* security.h (add_access_allowed_ace): Adjust prototype to above change.
(add_access_denied_ace): Ditto.
* sec_acl.cc (get_posix_access): Handle multiple ACEs for the
owner and primary group of the file. Handle the default primary
group ACE as DEF_GROUP_OBJ entry if the directory has the S_ISGID bit
set. Add comments. Minor code rearrangements.
Preliminary read side implementation of new permission handling.
* acl.h (MAX_ACL_ENTRIES): Raise to 2730. Add comment to explain.
* sec_acl.cc: Add leading comment to explain new ACL style.
Add definitions and macros to use for bits in new Cygwin ACL.
(DENY_RWX): New mask value for all temporary deny bits.
(getace): Add bool parameter to decide when leaving all bits intact,
rather than filtering them per the already set bits.
(get_posix_access): New function, taking over functionality to read
POSIX ACL from SECURITY_DESCRIPTOR.
(getacl): Just call get_posix_access.
* sec_helper.cc (well_known_cygwin_sid): Define.
* security.cc (get_attribute_from_acl): Remove.
(get_info_from_sd): Remove.
(get_reg_sd): Call get_posix_access instead of get_info_from_sd.
(get_file_attribute): Ditto.
(get_object_attribute): Ditto.
* security.h (well_known_cygwin_sid): Declare.
(get_posix_access): Add prototype.
* Throughout, use simpler ACE macros from Windows' accctrl.h.
* getfacl.c (main): Special-case SYSTEM and Admins group. Add comments.
* setfacl.c: Align more to Linux tool.
(delacl): New function to delete acl entries only.
(modacl): Drop delete functionality. Add handling of recomputing the
mask and default mask values.
(delallacl): Rename from delacl.
(setfacl): Call delacl in Delete case. Call delallacl in DeleteAll
and DeleteDef case.
(usage): Accommodate new options. Rearrange and rephrase slightly.
(longopts): Emit 'x' in --delete case. Add --no-mask and --mask
options.
(opts): Add -x and -n options.
(main): Handle -d and -x the same. Handle -n and --mask options.
Drop handling for -r option.
* getfacl.c (usage): Align more closely to Linux version. Add new
options -c, -e, -E. Change formatting to accommodate longer options.
(longopts): Rename --noname to --numeric. Keep --noname for backward
compatibility. Add --omit-header, --all-effective and --no-effective
options.
(opts): Add -c, -e and -E option.
(main): Handle new -c, -e, and -E options.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
* fhandler_tty.cc (fhandler_pty_slave::fch_close_handles): Don't close
handles not opened via fhandler_pty_slave::fch_open_handles.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
* fhandler.h (class fhandler_base): Add virtual function
get_io_handle_cyg() to get handle from which OPOST-processed output is
read on PTY master.
(class fhandler_pty_slave): Add variable output_handle_cyg to store a
handle to which OPOST-processed output is written. Add two functions,
i.e., set_output_handle_cyg() and get_output_handle_cyg(), regarding
variable output_handle_cyg. Now, output_handle is used only by native
windows program. The data before OPOST-processing is written to
output_handle and OPOST-processing is applied in the master-side. For a
cygwin process, OPOST-processing is applied in the slave-side, and the
data after OPOST-processing is written to output_handle_cyg.
(class fhandler_pty_master): Add two variables, i.e., io_handle_cyg and
to_master_cyg, to store handles of a pipe through which OPOST-processed
output passes. Add pty_master_fwd_thread and function
pty_master_fwd_thread() for a thread which applies OPOST-processing
and forwards data from io_handle to to_master_cyg. Add function
get_io_handle_cyg() regarding variable io_handle_cyg. Now, the pipe
between io_handle and to_master are used only by native windows program
for applying OPOST-processing in the master-side. For a cygwin process,
the pipe between io_handle_cyg and to_master_cyg is used for passing
through the data which is applied OPOST-processing in the slave-side.
* fhandler_tty.cc (struct pipe_reply): Add member to_master_cyg.
(fhandler_pty_master::process_slave_output): Read slave output from
io_handle_cyg rather than io_handle.
(fhandler_pty_slave::fhandler_pty_salve): Initialize output_handle_cyg.
(fhandler_pty_slave::open): Set output_handle_cyg by duplicating handle
to_master_cyg on PTY master.
(fhandler_pty_slave::close): Close handle output_handle_cyg.
(fhandler_pty_slave::write): Write data to output_handle_cyg rather
than output_handle.
(fhandler_pty_slave::fch_close_handles): Close handle output_handle_cyg.
(fhandler_pty_master::fhandler_pty_master): Initialize io_handle_cyg,
to_master_cyg and master_fwd_thread.
(fhandler_pty_master::cleanup): Clean up to_master_cyg as well.
(fhandler_pty_master::close): Print to_master_cyg as well in debug
message. Terminate master forwarding thread. Close handles
to_master_cyg and io_handle_cyg.
(fhandler_pty_master::ioctl): Use io_handle_cyg rather than to_master.
(fhandler_pty_master::pty_master_thread): Add code for duplicating
handle to_master_cyg.
(fhandler_pty_master::pty_master_fwd_thread): New function for a thread
to forward OPOST-processed data from io_handle to to_master_cyg. This
thread applies OPOST-processing to the output of native windows program.
(::pty_master_fwd_thread): Ditto.
(fhandler_pty_master::setup): Create a new pipe to pass thruegh OPOST-
processed output. Create new thread to forward data from io_handle to
to_master_cyg. Set handle to_master_cyg to tty. Print io_handle_cyg as
well in debug message. Close handles io_handle_cyg and to_master_cyg in
case of error.
(fhandler_pty_master::fixup_after_fork): Set handle to_master_cyg to
tty. Copy handle to_master_cyg from arch->to_master_cyg.
(fhandler_pty_master::fixup_after_exec): Clean up to_master_cyg.
* select.cc: Check handle returned by get_io_handle_cyg() rather than
get_handle().
* tty.h (class tty): Add variable _to_master_cyg to store a handle to
which OPOST-processed data is written. Add two functions,
to_master_cyg() and set_to_master_cyg(), regarding _to_master_cyg.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
* fhandler_tty.cc (fhandler_pty_slave::read): Change calculation of
"readlen" not to use "bytes_in_pipe" value directly.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
* tty.h (class tty_min): Remove variable "write_error" to which any
errors are not currently set at anywhere.
(class tty): Add variable "column" for handling ONOCR.
* tty.cc (tty::init): Add initialization code for variable "column".
* fhandler.h (class fhandler_pty_master): Remove variable "need_nl"
which is not necessary any more. "need_nl" was needed by OPOST process
in fhandler_pty_master::process_slave_output().
(class fhandler_pty_common): Add function process_opost_output() for
handling post processing for OPOST in write process.
* fhandler_tty.cc (fhandler_pty_master::process_slave_output): Count
TIOCPKT control byte into length to be read in TIOCPKT mode. Move
post processing for OPOST to write process. Remove code related to
variable "write_error". Return with EIO error if slave is already
closed.
(fhandler_pty_master::fhandler_pty_master): Remove initialization
code for variable "need_nl".
(fhandler_pty_common::process_opost_output): Add this function for
handling of OPOST in write process. Add code to avoid blocking in
non-blocking mode when output is suspended by ^S.
(fhandler_pty_slave::write): Call fhandler_pty_common::
process_opost_output() instead of WriteFile(). Remove code related to
variable "write_error".
(fhandler_pty_master::doecho): Call fhandler_pty_common::
process_opost_output() instead of WriteFile().
* select.cc (peek_pipe): Remove code related to variable "need_nl".
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
(tty::is_master_closed): Drop method.
* fhandler_tty.cc (fhandler_pty_slave::open): Remove code prematurely
bailing out if master control thread is not running.
(fhandler_pty_slave::read): Don't generate SIGHUP if master control
thread is not running.
(fhandler_pty_master::close): Rearrange code to avoid stopping master
control thread twice in multi-threaded scenarios.
(class fhandler_pty_master): Add echo_r and echo_w handles constituting
read and write side of new echo pipe.
* select.cc (peek_pipe): On pty masters, check additionally if input
from the echo pipe is available.
* fhandler_tty.cc (fhandler_pty_master::doecho): Drop output_mutex
locking. Write output to echo pipe.
(fhandler_pty_master::process_slave_output): Check if input is available
in echo pipe and prefer to read from it, if so.
(fhandler_pty_slave::write): Drop output_mutex locking.
(fhandler_pty_master::fhandler_pty_master): Initialize echo pipe
handles to NULL.
(fhandler_pty_master::close): Close and NULL echo pipe handles.
(fhandler_pty_master::setup): Create echo pipe, close in case of error.
written bytes.
* fhandler_termios.cc (fhandler_termios::tcinit): Fix formatting.
(fhandler_termios::line_edit): Return bytes actually written. Write
in 32 byte chunks in non-canonical mode to reduce number of WriteFile
calls. Don't just eat unwritten bytes in case of an error condition.
Especially, don't report them back to the caller as written.
* fhandler_tty.cc (fhandler_pty_slave::read): Disable code reducing
the number of bytes read from the pipe to vmin. Add comment.
(fhandler_pty_master::write): Convert ret to ssize_t type. Just call
line_edit once, not in a loop once for each byte. Return bytes written
as returned by line_edit.
to declaration.
* fhandler_tty.cc (fhandler_pty_slave::fch_open_handles): Add bool
parameter "chown". Only request WRITE_OWNER access when opening pty
synchronization objects if "chown" is set.
(fhandler_pty_slave::fchmod): Call fch_open_handles with new bool
parameter set to false.
(fhandler_pty_slave::fchown): Call fch_open_handles with new bool
parameter set to true.
* kernel32.cc (CreateFileMappingW): Fix default standard rights for
file mappings from READ_CONTROL to STANDARD_RIGHTS_REQUIRED to allow
changing the DACL (fixes "access denied" error in pinfo::set_acl).
* fhandler_disk_file.cc (fhandler_base::fstat_helper): Change debug
output to print mode bits in octal.
* security.cc (alloc_sd): Ditto.
(set_file_attribute): Ditto.
essentially guarded by thread-specific signal_arrived.
* exceptions.cc (_cygtls::handle_SIGCONT): Simplify. Eliminate lock/unlock
since code is guarded by signal_arrived.
INFINITE amount of time. Instead default to 1/10 second.
(fhandler_pty_slave::open): Just default to INFINITE wait rather than
(now) waiting longer than previously.
warnings between regparm definitions and declarations.
* smallprint.cc (__small_vswprintf): Conditionalize declaration and
setting of l_opt for only x86_64.
* spawn.cc (child_info_spawn::worker): Remove unused 'pid' variable.
* thread.cc (verifyable_object_isvalid): Temporarily define as
non-inline with gcc 4.7+, regardless of target.
(mainly in fhandler*) start fixing gcc 4.7.2 mismatch between regparm
definitions and declarations.
* gendef: Define some functions to take @ declaration to accommodate _regN
defines which use __stdcall.
* gentls_offsets: Define __regN macros as empty.
* autoload.cc (wsock_init): Remove unneeded regparm attribute.
* winsup.h (__reg1): Define.
(__reg2): Define.
(__reg3): Define.
* advapi32.cc (DuplicateTokenEx): Coerce some initializers to avoid warnings
from gcc 4.7.2.
* exceptions.cc (status_info): Declare struct to use NTSTATUS.
(cygwin_exception::dump_exception): Coerce e->ExceptionCode to NTSTATUS.
* fhandler_clipboard.cc (cygnativeformat): Redefine as UINT to avoid gcc 4.7.2
warnings.
(fhandler_dev_clipboard::read): Ditto.
handling when stopped by CTRL-S.
* fhandler_tty.cc (bytes_available): Add arguments to debug_only_printf call.
* sigproc.cc (proc_subproc): Simplify some if logic.
output_mutex on CTRL-S/CTRL-Q to avoid a deadlock.
* fhandler_tty.cc (fhandler_pty_slave::write): Loop when output_stopped is
detected before acquiring output_mutex. Acquire output_mutex in the loop for
each write.
* tty.h: Remove some obsolete defines.
(tty_min::output_stopped): Make 'bool'.
* exceptions.cc (sig_handle_tty_stop): Make sure that incyg is cleared when
exiting if we have no parent process. Only wait for signal_arrived.
(sigpacket::process): Make continue_now a bool. Delay sending signal_arrived
until the end. Make code more defensive to avoid calling signal handler when
stopped. Only set signal_arrived when stopped.
* sigproc.cc (sig_hold): Rename from sigCONT. Make static.
(sig_send): Accommodate sigCONT -> sig_hold rename.
(wait_sig): Ditto.
* sigproc.h (sigCONT): Delete declaration.
* fhandler_console.cc (fhandler_console::write): Use new '%0c' facility to
print characters. Change to paranoid to avoid excessive strace output.
* fhandler_tty.cc (fhandler_pty_master::accept_input): Make frequent strace
printf "paranoid" to help cut down on strace output size.
* signal.cc (sigsuspend): Add standard syscall strace output.
(sigpause): Ditto.
(pause): Ditto.
* cygtls.h (_cygtls::reset_signal_arrived): New function.
* cygserver_ipc.h (ipc_set_proc_info): Use _cygtls::ipc_set_proc_info to set
per-thread signal arrived value.
* cygthread.cc (cygthread::detach): Use per-thread signal_arrived via
set_thread_waiting.
* fork.cc (_cygtls::fixup_after_fork): Clear signal_arrived.
(_cygtls::remove): Close any signal_arrived handle when thread exists.
(_cygtls::find_tls): Remove unneeded function.
* cygtls.h: Update copyright.
(class _cygtls): Reorganize to help avoid rebuilding newlib when structure
changes.
(_cygtls::event): Delete.
(_cygtls::threadkill): Ditto.
(_cygtls::signal_waiting): Declare new bool.
(_cygtls::find_tls): Delete declaration.
(_cygtls::set_threadkill): Ditto.
(_cygtls::reset_threadkill): Ditto.
(_cygtls::set_signal_arrived): Declare new function.
(class set_thread_waiting): Declare new class.
* cygwait.cc (cw_nowait_storage): Define.
(cygwait): Set per-thread signal_arrived via set_thread_waiting. Don't
special-case _main_tls.
* cygwait.h (cw_nowait): Define.
(cw_infinite): Ditto.
(cygwait): Redefine pathological wait-only case.
* dcrt0.cc (dll_crt0_0): Remove call to now-defunct events_init().
(dll_crt0_1): Remove call to now-defunct create_signal_arrived().
* exceptions.cc: Reflect set_signal_mask() argument reordering throughout.
Remove signal mask synchronization throughout.
(events_init): Delete definition.
(mask_sync): Delete now-unneeded mask synchronization.
(set_signal_mask): Reverse order of arguments to "standard" to, from layout.
Rename "newmask" argument to "setmask". Remove debugging.
(sig_handle_tty_stop): Use cancelable_wait rather than WFMO.
(_cygtls::interrupt_setup): Don't treat "threadkill" events specially.
Conditionally set signal_arrived depending on whether the thread has created it
or not.
(sigpacket::process): Reorganize to reflect thread-specific sending of signals
which is more in line with the way it was actually supposed to work.
* fhandler_socket.cc (get_inet_addr): Use cancelable_wait rather than
IsEventSignalled to avoid potential race.
(fhandler_socket::wait_for_events): Set signal_arrived event using
set_thread_waiting().
(fhandler_socket::close): Use cygwait for the case of just waiting 10 ms for a
signal.
* fhandler_tape.cc (fhandler_dev_tape::_lock): Use cancelable_wait rather than
WFMO. Redo switch/case tests accordingly.
* fhandler_termios.cc (fhandler_termios::bg_check): Use cygwait for case of
just waiting 0 ms for a potential signal.
* fhandler_tty.cc (fhandler_pty_master::process_slave_output): Use
cancelable_wait rather than WFSO.
* fhandler_windows.cc (fhandler_windows::read): Set per-thread signal_arrived
via set_thread_waiting().
* flock.cc (lf_setlock): Ditto.
* select.cc (pselect): Ditto. Set per-thread signal_arrived using
set_thread_waiting().
* gendef: Don't special case handling of _cygtls::sig for threads.
* gentls_offsets: Use #pragma once in tlsoffsets.h.
* ntdll.h: Use #pragma once.
* poll.cc: Reflect set_signal_mask() argument reordering.
* posix_ipc.cc (ipc_mutex_lock): Use cancelable_wait rather than WFMO.
(ipc_cond_timedwait): Set perl-thread signal arrived using
set_thread_waiting().
* security.h: Use #pragma once.
* signal.cc (abort): Reflect set_signal_mask() argument reordering.
(clock_nanosleep): Ditto. Change call to cancelable_wait to properly specify
handling of cancel and interrupt.
(sigwaitinfo): Remove handling of per-thread event in favor of per-thread
signal_arrived. Use cancelable_wait rather than WFSO.
* sigproc.cc (signal_arrived): Delete definition.
(create_signal_arrived): Ditto.
* sigproc.h (signal_arrived): Delete declaration.
(set_signal_mask): Avoid defining as a "C" function. Don't conditionally
declare.
(create_signal_arrived): Delete declaration.
* syscalls.cc (rename): Use cygwait() rather than WFSO.
* thread.h (fast_mutex::lock): Use cw_infinite rather than LARGE_NULL.
* wait.cc (wait4): Ditto.
* thread.cc (pthread_mutex::lock): Ditto.
(pthread::join): Ditto.
(semaphore::_wait): Ditto.
(pthread_kill): Remove set_threadkill() accommodation.
* tlsoffsets.h: Regenerate.
building against w32api headers.
(RegOpenCurrentUser): Ditto.
* fhandler_tty.cc (GetNamedPipeClientProcessId): Ditto.
* ntdll.h (enum _PROCESSINFOCLASS): Add ProcessImageFileName.
(RtlInitAnsiString): Declare.
(RtlUnicodeStringToAnsiSize): Declare.
* sched.cc (GetForegroundWindow): Ditto.
* sec_helper.cc (SECURITY_NT_NON_UNIQUE): Define as
SECURITY_NT_NON_UNIQUE_RID when building against w32api headers.
(cygsid::get_sid): Use SECURITY_NT_NON_UNIQUE rather than
SECURITY_NT_NON_UNIQUE_RID.
(__sec_user): Use PISECURITY_DESCRIPTOR rather than PSECURITY_DESCRIPTOR
to allow valid pointer arithmetic.
(_recycler_sd): Ditto.
(_everyone_sd): Ditto.
* fhandler_tty.cc (bytes_available): Revert to previous Oct-2011 behavior where
a dummy buffer is used to determine how many bytes will be read.
(fhandler_pty_master::ioctl): Correct coercion in assignment.
specifically called setsid.
* fhandler_tty.cc (fhandler_pty_slave::dup): Ditto. Also add comment
documenting research into rxvt problem.
* fhandler_termios.cc (fhandler_termios::tcsetpgrp): Don't check specifically
for myself->ctty == -1. Test for > 0 as that is the correct test.
(fhandler_termios::sigflush): Ditto.
* cygheap.h (init_cygheap::manage_console_count): Ditto.
(init_cygheap::console_count): Ditto.
* fhandler.h (fhandler_console::has_a): Ditto.
(fhandler_console::free_console): Declare new function.
* fhandler_console.cc (fhandler_console::free_console): Define new function.
(fhandler_console::open_setup): Delete call to manage_console_count.
(fhandler_console::close): Ditto. Replace with call to free_console().
* fhandler_tty.cc (fhandler_pty_slave::open): Delete call to
manage_console_count.
(fhandler_pty_slave::cleanup): Ditto.
(fhandler_pty_slave::close): Call fhandler_console::free_console() if this is
our controlling tty.
* pinfo.cc (_pinfo::set_ctty): Skip function if tty in question == our ctty.
Delete call to manage_console_count.
* syscalls.cc (close_all_files): Avoid locking and avoid setting errno when
iterating over fds.
for stuff".
* fhandler.cc (fhandler_base_overlapped::wait_overlapped): Use simplified arg
form of cygwait.
* fhandler_console.cc (fhandler_console::read): Ditto.
* fhandler_audio.cc (fhandler_dev_dsp::Audio_out::waitforspac): Ditto.
(fhandler_dev_dsp::Audio_in::waitfordata): Ditto.
* fhandler_fifo.cc (fhandler_fifo::wait): Ditto.
* fhandler_serial.cc (fhandler_serial::raw_read): Ditto.
(fhandler_serial::raw_write): Ditto.
* select.cc (cygwin_select): Ditto.
* sigproc.h (cygwait): Rename from cygWFMO. Define two argument and single
argument forms of this function.
* fhandler_tty.cc (fhandler_pty_slave::open): Use method to query if tty is
open.
(fhandler_pty_slave::read): Send SIGHUP when master is detected as closed.
(fhandler_pty_common::close): Close input_available_event in callers since
master may need to signal it first.
(fhandler_pty_master::close): Lie and set input_available_event when closing,
then close input_available_event.
(fhandler_pty_slave::close): Close input_available_event explicitly here.
* tty.h (tty::is_master_closed): Declare new method.
Throughout, change syscalls to report on return values using new %R format
option.
* smallprint.cc (__small_vsprintf): Add parsing for %R to report on return
values and possible errno from syscalls.
* errno.cc (errmap): Add PRIVILEGE_NOT_HELD.
* fhandler_tty.cc (fhandler_pty_master::setup): When creating a thread use
shorter name to reduce debuggging output.
* select.cc (start_thread_pipe): Ditto.
(start_thread_serial): Ditto.
(start_thread_socket): Ditto.
(start_thread_mailslot): Ditto.
* sigproc.cc (talktome): Ditto.
"create_selectable". Change return to DWORD.
(fhandler_pty_common::pipesize): New constant.
* fhandler_fifo.cc (fhandler_fifo::fhandler_fifo): Reflect create_selectable
name change.
* miscfuncs.cc (CreatePipeOverlapped): Ditto.
* pipe.cc (fhandler_pipe::create): Ditto.
(fhandler_pipe::create): Rename from the misnamed "create_selectable". Return
DWORD. Only set pipe size to default when it is passed in as zero.
* fhandler_tty.cc (fhandler_pty_master::setup): Ditto. Use
fhandler_pty_common::pipesize rather than a raw constant.
* tty.cc (tty::not_allocated): Ditto.
* sigproc.cc (sigproc_init): Use create_selectable to create the signal pipe to
get a more appropriate message based pipe.
Takashi Yano
Mark Geisert
Corinna Vinschen
Christopher Faylor
Yaakov Selkowitz