(pinfo::exit): Move here from _pinfo::exit.
* sigproc.cc (child_info::sync): Use new function to set exitcode and
process_state.
* pinfo.cc (_pinfo::exit): Ditto.
(proc_waiter): Ditto.
(_pinfo::set_exit_state): Define new function.
(_pinfo::dup_proc_pipe): Close handle when there is no parent process around to
care about the exit value.
* dcrt0.cc (dll_crt0_0): Move subproc_ready synchronization later to make sure
that myself is still mapped in parent.
(do_exit): Reflect movement to pinfo::exit.
(__api_fatal): Ditto.
* exceptions.cc (signal_exit): Ditto.
* errno.cc (errmap): Map PROC_NOT_FOUND.
* init.cc (dll_entry): Release myself before exiting.
* sigproc.cc (proc_can_be_signalled): Set errno appropriately.
(sig_send): Ditto. Also remove ill-advised test for !myself->sendsig since
this is an indication of a process which is still initializating -- it is not
an error.
(child_info::sync): Don't set exitcode here. Assume that will happen in
proc_waiter, if necessary.
* spawn.cc (spawn_guts): Delay "wait_for_myself" logic until later. Don't wait
at all if the process has already exited. Reflect movement to pinfo::exit.
(child_info::parent_wr_proc_pipe): Eliminate.
* pinfo.h (_pinfo::alert_parent): Move here from pinfo class.
(_pinfo::dup_proc_pipe): New method.
(_pinfo::sync_proc_pipe): Ditto.
* exceptions.cc (sig_handle_tty_stop): Reflect move of alert_parent.
* init.cc (dll_entry): Exit with status one if main process called ExitProcess.
* pinfo.cc (set_myself): Remove handling of parent_wr_proc_pipe.
(_pinfo::exit): Reflect move of alert_parent. Set procinfo to NULL to flag
that we are exiting normally. Always use exitcode when exiting
(although this could be a little racy).
(pinfo::init): Set default exit to SIGTERM. This will be the exit code
reported if process is terminated.
(_pinfo::dup_proc_pipe): New function.
(pinfo::wait): Duplicate wr_proc_pipe to the right place. Use dup_proc_pipe to
move the pipe to the child.
(_pinfo::sync_proc_pipe): New function.
(_pinfo::alert_parent): Move to _pinfo. Make sure that wr_proc_pipe is ours
before using it.
* sigproc.cc (child_info::child_info): Remove handling of parent_wr_proc_pipe.
* spawn.cc (spawn_guts): Pass our wr_proc_pipe to the child when execing.
Ensure that exit code of cygwin process started from windows is correctly set.
* dcrt0.cc (dll_crt0_0): Remove hexec_proc stuff.
* fork.cc (fork_child): Remove call to pinfo_fixup_after_fork.
* pinfo.cc (set_myself): Close and zero pid_handle if set.
(pinfo_fixup_after_fork): Delete.
(proc_waiter): Don't close vchild.hProcess here. Do that when we are remove
the vchild from procs. Save hProcess as pid_handle only on first reparent
operation.
(pinfo::wait): Don't set pid_handle here.
(pinfo::alert_parent): Always try to send signal. If unsuccessful then close
and zero wr_proc_pipe.
* pinfo.h (pinfo::pinfo): Make sure that appropriate parts of the class are
zeroed on construction.
(pinfo::alert_parent): Take char argument.
(pinfo_fixup_after_fork): Delete declaration.
(hexec_proc): Ditto.
* sigproc.cc (remove_proc): Close pid_handle and hProcess if appropriate.
* spawn.cc (spawn_guts): Set cygheap->pid_handle on first exec.
* cygheap.h (init_cygheap::pid_handle): New element.
* pinfo.cc (set_myself): Clear previously existing cygheap->pid_handle when a
new process has been started.
(pinfo::wait): Make sure that a handle to the newly forked/spawned process is
kept around so that the pid will not be reused.
* pinfo.h (_pinfo::pid_handle): Move.
(pinfo::pid_handle): to here.
* spawn.cc (spawn_guts): Create a pid_handle in cygheap prior to spawning to
ensure that the pid does not get reused during the lifetime of the "cygwin
pid".
* pinfo.h (pinfo::alert_parent): New function.
* exceptions.cc (sig_handle_tty_stop): Use alert_parent to send "signals" to
parent.
* fork.cc (fork_parent): Don't close pi.hProcess. Let the waiter thread do
that.
* pinfo.cc (proc_waiter): Detect case where process exits without setting the
exit code and use value from GetExitCodeProcess. Reluctantly implement
__SIGREPARENT.
(pinfo::alert_parent): Define.
* sigproc.h (__SIGREPARENT): New enum.
* spawn.cc (spawn_guts): Send reparent signal to parent on exec. Always create
process in suspended state to avoid races. Remove cygthread.h in favor of
cygtls.h throughout since cygtls now includes cygthread.h. Eliminate
ppid_handle usage throughout.
* child_info.h: Regenerate magic number
(child_info): Remove pppid_handle.
* cygthread.h (cygthread::release): New method. Frees thread without waiting.
* cygthread.cc (cygthread::stub): Set _ctinfo in _mytls to point to information
for executing thread. Don't call SetEvent if thread is no longer in use.
(cygthread::simplestub): Ditto.
* cygtls.h (_cygtls::_ctinfo): New element contains pointer to information
about executing cygthread, if any.
* dcrt0.cc: Remove last vestiges of per_thread stuff.
(dll_crt0_0): Ditto. Remove accommodation for ppid_handle.
(do_exit): Remove obsolete reparenting test.
(_exit): Exit with a more SUSv3-like exit value.
* dtable.cc (dtable::stdio_init): Check for myself->cygstarted rather than
myself->ppid_handle to see if we were started by a cygwin process.
* exceptions.cc (open_stackdumpfile): Ditto.
(handle_exceptions): Ditto.
(ctrl_c_handler): Ditto.
(sig_handle_tty_stop): Ditto. Let parent send signal to itself on STOP.
(sigpacket::process): Comment out vfork test.
(signal_exit): Use more SUSv3-like exit value on signal.
* external.cc (fillout_pinfo): Don't set hProcess.
* fork.cc: Remove VFORK cruft.
(per_thread::set): Delete.
(fork_child): Remove perthread stuff.
(fork_parent): Remove obsolete subproc_init. Accommodate new method for
tracking subprocesses.
* pinfo.cc (set_myself): Accommodate new pinfo/_pinfo layout. Set some things
here that used to be set in wait_sig.
(_pinfo::exit): Set exitcode here. Close process pipe.
(_pinfo::commune_send): Accommodeate new pinfo/_pinfo layout.
(proc_waiter): New function. Waits, in a thread for subprocess to go away.
(pinfo::wait): New function. Initialization for proc_waiter.
* pinfo.h (_pinfo::exitcode): New element.
(_pinfo::cygstarted): Ditto.
(_pinfo::wr_proc_pipe): Ditto.
(_pinfo::ppid_handle): Delete.
(_pinfo::hProcess): Delete.
(_pinfo::lock): Delete.
(pinfo::hProcess): New element.
(pinfo::lock): Ditto.
(pinfo::wait): Declare new function.
(pinfo::preserve): Define new function.
* sigproc.cc: Remove old stuff from wait_subproc thread based method.
(zombies): Remove.
(procs): New.
(my_parent_is_alive): Just check that the parent pid exists.
(mychild): Just use pinfo methods to determine if child is mine.
(proc_subproc): Revamp PROC_ADDCHILD to use pinfo::wait. Remove
PROC_CHILDTERMINATED logic. Use different method to remove processes from list
when SIGCHLD == SIG_IGN.
(proc_terminate): Gut.
(subproc_init): Delete.
(init_child_info): Remove setting of pppid_handle.
(checkstate): Revamp to only scan procs array.
(remove_proc): Rename from remove_zombie. Don't close hProcess or pid_handle.
Don't release memory if it's myself.
(stopped_or_terminated): Change logic to handle new consolidated proc/zombie
array.
(wait_subproc): Delete.
* sigproc.h: Remove obsolete EXIT_* defines.
(subproc_init): Remove declaration.
* spawn.cc (spawn_guts): Remove reparenting stuff. Use standard wait logic to
wait for child if started from a non-cygwin process.
* tlsoffsets.h: Regenerate.
* tty.cc (tty_init): Check for myself->cygstarted rather than
myself->ppid_handle to see if we were started by a cygwin process.
* include/sys/signal.h (external_pinfo::exitcode): Replace hProcess.
* include/sys/wait.h (WCOREDUMP): Define.
* fhandler_tty.cc (fhandler_tty_slave::read): Add debugging output for timeout
case.
* signal.cc (abort): Flag that we are exiting with the ABORT signal.
starting.
* child_info.h (init_child_info): Remove pid argument from declaration.
* cygheap.h (init_cygheap::pid): New element.
* dcrt0.cc (dll_crt0_0): Eliminate handling of now-noexistent cygpid parameter
in child_info struct. Set forkee to 'true' rather than cygpid since the pid
value was never used.
(dll_crt0_1): Ditto.
(_dll_crt0): Ditto.
* fork.cc (fork_child): Don't wait for sigthread. This is handled in the fork
call now.
(fork_parent): Remove obsolete pid argument from init_child_info call. Don't
do anything special with cygpid when DEBUGGING.
(fork): Delay all signals during fork.
(fork_init): Don't do anything special when DEBUGGING.
* pinfo.cc (set_myself): Remove pid parameter. Use new pid field in cygheap.
(pinfo_init): Don't pass pid argument to set_myself.
* sigproc.cc (sig_send): Wait for dwProcessId to be non-zero as well as
sendsig.
(init_child_info): Eliminate handling of pid.
(wait_sig): Implement method to temporarily hold off sending signals.
* sigproc.h (__SIGHOLD): New enum.
(__SIGNOHOLD): Ditto.
* spawn.cc (spawn_guts): Remove obsolete pid argument from init_child_info
call.
* tty.h (tty_list::allocate_tty): Turn argument into a boolean.
* tty.cc (tty_list::init): Protect entire allocation operation with tty_mutex
(formerly title_mutex) to protect against allocation races.
(_cygtls::wq): Declare.
* cygtls.cc (_cygtls::fixup_after_fork): Clear wq.thread_ev to avoid using an
invalid event handle in forked process.
* dcrt0.cc (waitq_storage): Delete.
(threadstuff): Remove waitq_storage.
* perthread.h (per_thread_waitq): Delete.
(waitq_storage): Delete declaration.
* sigproc.cc (sigproc_init): Remove perthread waitq consideration.
* sigproc.h (waitq): Delete declaration.
* wait.cc (wait4): Use _my_tls waitq structure rather than per_thread.
* cygtls.h (_cygtls::newmask): Delete member.
(_cygtls::deltamask): New member.
* gendef (_sigdelayed): Replace the call to set_process_mask by a call to
set_process_mask_delta.
* exceptions.cc (handle_sigsuspend): Do not filter tempmask. Or
SIG_NONMASKABLE in deltamask as a flag.
(_cygtls::interrupt_setup): Set deltamask only.
(set_process_mask_delta): New function.
(_cygtls::call_signal_handler): Replace the first call to set_process_mask by a
call to set_process_mask_delta.
* tlsoffsets.h: Regenerate.
* exceptions.cc: Remove some __I386__ conditionals.
(handle_exceptions): Move ppid test to outside of a loop for efficiency.
(setup_handler): Make debugging output more wordy.
(_cygtls::call_signal_handler): To avoid a race, use lock/unlock to synchronize
with signal thread and ensure that signal_arrived event has actually been set.
* gendef (_sigfe): Use ebx for all sigstack manipulations to ensure that the
register is saved. Move setting of incyg to within stack lock to avoid
setup_handler confusion.
(_sigbe): Use ebx for all sigstack manipulations to ensure that the register is
saved.
(_cygtls::pop): Ditto.
(_cygtls::lock): Ditto.
(stabilize_sig_stack): Ditto.
(setjmp): Ditto.
(longjmp): Ditto.
function, in an exception, spinning, or locked.
* gendef (_sigfe): Move incyg setting earlier.
(sigreturn): Set incyg flag to avoid interrupting called cygwin functions.
(sigdelayed): Ditto.
(stabilize_sig_stack): Ditto.
* sigproc.cc (proc_subproc): Don't restore process lock early in exec case.
* cygtls.h: Reorganize fields in _cygtls slightly.
* tlsoffsets.h: Regenerate.
could conceivably exit before function returns, rendering the child's shared
memory area invalid.
* cygtls.h (_cygtls::incyg): Declare new field.
(_cygtls::in_exception): Define new function.
* exceptions.cc (setup_handler): Remove locked flag. Use 'incyg' flag and
in_exception function to determine when we're in a cygwin function.
(_cygtls::call_signal_handler): Decrement incyg flag prior to calling a
handler. Increment it on return.
* gendef (_sigfe): Increment incyg flag. Use testl for zero testing rather
than orl, for consistency.
(_sigbe): Decrement incyg flag. Use testl for zero testing rather than orl,
for consistency.
(_cygtls::pop): Use testl for zero testing rather than orl, for consistency.
(stabilize_sig_stack): Ditto.
to force signal to be handled. Zero event here to prevent races.
* signal.cc (sigwaitinfo): Use local handle value for everything since signal
thread could zero event element at any time. Detect when awaking due to thread
not in mask and set return value and errno accordingly. Don't set signal
number to zero unless we've recognized the signal.
* sigproc.cc (sigq): Rename from sigqueue throughout.
* thread.cc (pthread::join): Handle signals received while waiting for thread
to terminate.
* cygwin.din: Export sighold, sigqueue.
* exceptions.cc (sighold): Define new function.
* signal.cc (handle_sigprocmask): Set correct errno for invalid signal.
Simplify debugging output.
(sigqueue): Define new function.
* include/cygwin/signal.h (sighold): Declare new function.
(sigqueue): Ditto.
* include/cygwin/version.h: Bump API minor version number.
* include/limits.h (TIMER_MAX): Define.
(_POSIX_TIMER_MAX): Ditto.
(sigfe.s): Ensure that sigfe.s will be regenerated if it does not exist.
* dll_init.cc (dll_dllcrt0): Simplify initializing tests.
* exceptions.cc (setup_handler): Detect when stub caller is either spinning or
has acquired the lock after being suspended to avoid windows problems with
suspending a win32 API call.
* cygtls.h (_cygtls::spinning): Declare new element.
* gendef: Remove unused _siglist_index and _siglist declaration.
(_sigfe): Set spinning element when potentially looping, waiting for lock.
(_sigbe): Ditto.
(_cygtls::lock): Ditto.
(_longjmp): Ditto.
* tlsoffsets.h: Regenerate.
* pinfo.cc (_pinfo::exit): Set final exit state here. Call sigproc_terminate
if invoked with 'norecord'. Clear any residual _cygtls stuff.
* winsup.h (exit_states): Define ES_FINAL.
* spawn.cc (spawn_guts): Don't call proc_terminate specifically when execing.
Let _pinfo::exit handle that case.
* sigproc.cc (wait_subproc): Always exit loop early when proc_loop_wait.
* init.cc (munge_threadfunc): Eliminate unused argument.
(dll_entry): Reflect above change in call to munge_threadfunc.
* cygtls.h (_cygtls::call_signal_handler): Rename from call_signal_handler_now.
(_cygtls::push): Make second argument mandatory.
(_cygtls::fixup_after_fork): Declare new function.
(_cygtls::lock): Ditto.
* cygtls.cc (_cygtls::fixup_after_fork): Define new function.
* dcrt0.cc (cygwin_finished_initializing): Define as bool.
(alloc_stack): Use _tlstop rather than arbitrary variable in probably vain
attempt to avoid strange fork problem on CTRL-C.
(dll_crt0_0): Remove obsolete winpids::init call.
* dll_init.cc (dll_dllcrt0): Detect forkee condition as equivalent to
initializing.
* winsup.h (cygwin_finished_initializing): Declare as bool.
* exceptions.cc (handle_exceptions): Rely on cygwin_finished_initializing to
determine how to handle exception during process startup.
(_cygtls::call_signal_handler): Rename from call_signal_handler_now.
(_cygtls::interrupt_now): Fill in second argument to push.
(signal_fixup_after_fork): Eliminate.
(setup_handler): Initialize locked to avoid potential inappropriate unlock.
Resume thread if it has acquired the stack lock.
(ctrl_c_handler): Just exit if ctrl-c is hit before cygiwn has finished
initializing.
* fork.cc (sync_with_child): Don't call abort since it can cause exit
deadlocks.
(sync_with_child): Change debugging output slightly.
(fork_child): Set cygwin_finished_initializing here. Call _cygtls fork fixup
and explicitly call sigproc_init.
(fork_parent): Release malloc lock on fork failure.
(vfork): Call signal handler via _my_tls.
* sigproc.cc (sig_send): Ditto.
* syscalls.cc (readv): Ditto.
* termios.cc (tcsetattr): Ditto.
* wait.cc (wait4): Ditto.
* signal.cc (nanosleep): Ditto.
(abort): Ditto.
(kill_pgrp): Avoid killing self if exiting.
* sync.cc (muto::acquire): Remove (temporarily?) ill-advised exiting_thread
check.
* gendef (_sigfe): Be more agressive in protecting stack pointer from other
access by signal thread.
(_cygtls::locked): Define new function.
(_sigbe): Ditto.
(_cygtls::pop): Protect edx.
(_cygtls::lock): Use guaranteed method to set eax to 1.
(longjmp): Aggressively protect signal stack.
* miscfuncs.cc (low_priority_sleep): Reduce "sleep time" for secs == 0.
* pinfo.cc (winpids::set): Counterintuitively use malloc's lock to protect
simultaneous access to the pids list since there are pathological conditions
which can cause malloc to call winpid.
(winpids::init): Eliminate.
* pinfo.h (winpids::cs): Eliminate declaration.
* pinfo.h (winpids::init): Eliminate definition.
* Makefile.in: Make version.h/cygwin.din version check a warning since it is
not foolproof.
* cygheap.h (CYGHEAPSIZE): Bump size down.
* cygtls.h (_threadinfo::stacklock): New element.
(_threadinfo::pop): Make regparm.
(_threadinfo::lock): New function.
(_threadinfo::unlock): New function.
* cygtls.cc (_threadinfo::push): Wait for a lock on the stack before performing
the operation.
(_threadinfo::pop): Move to another file.
* cygwin.din: More SIGFE changes.
* exceptions.cc (try_to_debug): Always display messages on console.
(handle_exceptions): Unwind stack only when actually about to call sig_send.
(setup_handler): Lock stack prior to performing any operations.
* gendef (_sigfe): Ditto.
(_sigbe): Ditto.
(_threadinfo::pop): Ditto. Move here.
* gen_tlsoffsets: Generate positive offsets.
* tlsoffsets.h: Regenerate.
version.
* debug.cc (__set_errno): Ditto.
* exceptions.cc (handle_sigsuspend): Remove spurious sig_dispatch_pending call.
(set_signal_mask): When there seem to be pending signals to dispatch, tell
signal_dispatch_pending/sig_send not to specifically call any handlers.
* sigproc.h (sig_dispatch_pending): Change declaration to void.
* sigproc.cc (sig_dispatch_pending): Change definition to void. Take an
argument to determine whether to tell sig_send to wait for handler to be
called.
* sigproc.cc (sig_send): Don't call signal handler when sig == __SIGFLUSHFAST.
(wait_sig): Honor __SIGFLUSHFAST. Guard against sigpacket::process nuking
si_signo.
* sigproc.h (__SIGFLUSHFAST): Define new special signal.
(sig_dispatch_pending): Change declaration to void. Take optional boolean
argument.
* fork.cc (vfork): Add debugging output.
signal_arrived and for sigCONT.
(sigpacket::process): Enforce sending of both signal_arrived and sigCONT, where
appropriate.
* gendef (sigreturn): Save tls pointer in ebx so that it can jump into
sigdelayed and use the same register.
initialization.
* dcrt0.cc (initial_env): Can it really be true that XP doesn't allow attaching
a debugger during DLL attach? Add temporary workaround.
(dll_crt0_0): Ensure that _impure_ptr stdio is initialized before any threads.
(dll_crt0_1): Move _impure_ptr initialization to dll_crt0_0.
* exceptions.cc (try_to_debug): Reinstate old method for looping while
debugging.
* syscalls.cc (_cygwin_istext_for_stdio): Regularize debugging output. Remove
hopefully extraneous check.
(setmode_helper): Add debugging output for improbable case. Use "binary"
rather "raw" for consistency.
* exceptions.cc (setup_handler): Improve debugging output.
(call_signal_handler_now): Remove ill-advised debugger call.
* sigproc.cc (sigcomplete_main): Delete.
(sig_send): Honor FIXME and avoid using main thread's completion event for
everything or suffer races.
(pending_signals::add): Default stored mask to current process mask rather than
mask at time of signal send.
(wait_sig): Add debugging output.
* sigproc.h (sigpacket::mask_storage): Delete.
* cygwin.din: Make clock SIGFE. Add clock_gettime, sigwaitinfo, timer_create,
timer_delete, timer_settime.
* include/cygwin/version.h: Reflect above additions.
* fork.cc (fork_child): Call fixup_timers_after_fork.
* signal.cc (sigwait): Remove unused variable.
* timer.cc: New file.
(clock_gettime): Define new function.
(timer_tracker): Define new struct used by timer functions.
(timer_tracker::timer_tracker): New function.
(to_us): New function.
(timer_thread): New function.
(timer_tracker::settime): New function.
(timer_create): New function.
(timer_settime): New function.
(timer_delete): New function.
(fixup_timers_after_fork): New function.
* cygthread.cc: Bump thread count.
* signal.cc (sigwaitinfo): Define new function.
(sigwait): Redefine based on sigwaitinfo.
* include/cygwin/signal.h (sigwaitinfo): Declare.
(sigwait): Ditto.
* dtable.cc (dtable::vfork_parent_restore): Avoid double close of ctty when
ctty == ctty_on_hold.
* cygtls.h (_threadinfo::threadkill): New element.
(_threadinfo::set_threadkill): Declare new function.
(_threadinfo::reset_threadkill): Declare new function.
* dcrt0.cc (dcrt0_1): Call here so that it will be possible to attach to
running process with #(*& Windows Me/9x.
(initial_env): Try to initialize strace if uninitialized.
* gendef: Don't zero signal if threadkill is set since that will happen in the
called function.
* signal.cc (sigwait): Ensure cleanup in error conditions.
* sigproc.cc (sig_send): Clear packet mask storage.
(wait_subproc): Fill in child exit code in siginfo_t structure.
* thread.cc (pthread_kill): Set threadkill flag.
* tlsoffsets.h: Regenerate. Throughout, use siginfo_t to fill out all signal
information for "kernel" signals.
* cygtls.h (_threadinfo::set_siginfo): Declare new function.
* cygtls.cc (_threadinfo::set_siginfo): Define new function.
* dcrt0.cc (do_exit): Accommodate siginfo_t considerations.
* exceptions.cc (handle_exceptions): Ditto.
(sig_handle_tty_stop): Ditto.
(ctrl_c_handler): Use killsys() to send signal.
(sigpacket::process): Rename from sig_handle. Use siginfo_t field from
sigpacket for everything.
(tty_min::kill_pgrp): Accommodate siginfo_t considerations.
(fhandler_termios::bg_check): Ditto.
* fhandler_tty.cc (fhandler_tty_slave::ioctl): Use killsys() to send signal.
* signal.cc (kill_worker): Rewrite to use siginfo_t second argument.
(kill_pgrp): Ditto.
(kill0): Define new function pulled from kill().
(kill): Rewrite as frontend to kill0.
(killsys): Define new function.
* sigproc.cc (sigelem): Eliminate.
(sigpacket): Move to sigproc.h. Subsume sigelem.
(pending_signals): Use sigpacket rather than sigelem for everything.
(sig_clear): Ditto.
(wait_sig): Ditto.
(sig_send): Rewrite to use siginfo_t argument.
(sig_send): New function wratpper to sig_send with siginfo_t argument.
(wait_subproc): Accommodate siginfo_t considerations.
* thread.cc (pthread_kill): Ditto.
* sigproc.h (sigpacket): Move here.
(sigpacket::process): Declare "new" function.
(sig_handle): Eliminate declaration.
(sig_send): Declare with new paramaters.
(killsys): Declare new function.
(kill_pgrp): Declare.
* winsup.h: Move some signal-specific stuff to sigproc.h.
* include/cygwin/signal.h: Tweak some siginfo_t stuff.
compiler bug.
* autoload.cc (TryEnterCriticalSection): Remove.
* dcrt0.cc (dll_crt0_0): Delete inappropriate setting of _my_tls.stackptr to
NULL since it has really bad consequences. Make 'si' an automatic variable.
* cygtls.cc (_threadinfo::init_thread): Correct thinko which caused thread list
to be allocated every time.
* cygtls.h (CYGTLS_PADSIZE): Define as const int.
* sync.h: Make multiple inclusion safe.
(muto::next): Eliminate.
(muto::exiting_thread): New variable.
(muto::set_exiting_thread): New function.
(new_muto): Change to use different section for mutos since c++ give
inexplicable warning in some cases otherwise.
(new_muto1): Ditto.
* dcrt0.cc (do_exit): Call muto::set_exiting_thread here.
* sync.cc (muto_start): Eliminate.
(muto::acquire): Always give exiting thread a lock. Never give thread a lock
if exiting.
(muto::release): Ditto for releasing.
* dtable.cc (dtable::init_lock): Unline function and define here.
* dtable.h (lock_cs): Define as a muto since critical sections seem to work
oddly on Windows Me.
(lock): Accommodate switch to muto.
(unlock): Ditto.
* exceptions.cc (setup_handler): Don't worry about acquiring mutos since that
hasn't mattered for a long time.
(signal_exit): Ditto: muto stuff will be handled automatically on exit now.
* Makefile.in (DLL_IMPORTS): Link advapi32 to ensure proper DLL initialization.
* autoload.cc (RegCloseKey): Arbitrarily choose this function as a "seed" to
pull the advapi32 link library in. So, comment out the autoloading.
* cygtls.cc (_threadinfo::init_thread): Just clear CYGTLS_PADSIZE.
(_threadinfo::remove): Add debugging.
(_threadinfo::find_tls): Ditto.
* cygtls.h (_threadinfo::padding): Make zero length (for now?).
* dcrt0.cc (dll_crt0_0): Move more initialization here from dll_crt0_1.
(dll_crt0_1): See above.
* dtable.h (dtable::lock): Remove commented out critical section locking.
* dtable.h (dtable::init_lock): Remove commented out critical section locking.
* dtable.h (dtable::unlock): Remove commented out critical section locking.
* exceptions.cc (interruptible): bool'ize.
* init.cc (threadfunc_fe): Revert to storing threadfunc at stack bottom.
(munge_threadfunc): Ditto. Avoid adding overhead to calibration_thread.
(prime_threads): Don't initialize tls stuff.
(dll_entry): Make minor change to initialization order.
* tlsoffsets.h: Regenerate.
* sigproc.cc (wait_sig): Add sanity check for end of process thread exit.
* select.h: Make minor formatting change.
* Makefile.in: Add still more -fomit-frame-pointer functions.
* dtable.h (dtable::lock): New function.
(dtable::unlock): New function.
(dtable::init_lock): New function.
* cygheap.h (HEAP_TLS): Declare new enum value.
(init_cygheap::threadlist): Declare new array.
(init_cygheap::sthreads): Declare new variable.
(cygheap_fdmanip::~cygheap_fdmanip): Use new dtable lock/unlock functions.
(cygheap_fdnew::cygheap_fdnew): Ditto.
(cygheap_fdget::cygheap_fdget): Ditto.
* dtable.cc (dtable_init): Initialize fdtab critical section.
(dtable::fixup_after_fork): Ditto.
(dtable::fixup_after_exec): Ditto.
(dtable::dup2): Use lock/unlock calls to protect access to fdtab.
(dtable::find_fifo): Ditto.
(dtable::fixup_before_fork): Ditto.
(dtable::fixup_before_exec): Ditto.
(dtable::set_file_pointers_for_exec): Ditto.
(dtable::vfork_child_dup): Ditto.
(dtable::vfork_parent_restore): Ditto.
* syscalls.cc (close_all_files): Ditto.
* sync.h (muto::acquired): Declare new function.
(new_muto1): Declare new macro used to specify name of muto storage.
* sync.cc (muto::acquired): Define new function.
* cygthread.cc (cygthread::stub): Remove signal chain removal call since it is
handled during initialization now.
* cygthread.cc (cygthread::simplestub): Remove signal chain removal call since
it is handled during initialization now.
* cygtls.cc (sentry): New class used for locking. Use throughout.
(_threadinfo::reset_exception): Don't pop stack.
(_threadinfo::find_tls): Move from exceptions.cc.
(_threadinfo::init_thread): Initialize array of threads rather than linked
list. Take second argument indicating thread function for this thread.
(_threadinfo::remove): Search thread array rather than linked list. Use sentry
to lock. Only unlock if we got the lock.
(_threadinfo::find_tls): Ditto for first two.
(handle_threadlist_exception): Handle exceptions when manipulating the thread
list in case of premature thread termination.
(_threadinfo::init_threadlist_exceptions): Ditto.
* cygtls.h (TLS_STACK_SIZE): Decrease size.
(_threadinfo::padding): Add element to avoid overwriting lower part of stack.
(_threadinfo::remove): Add a "wait" argument to control how long we wait for a
lock before removing.
* exceptions.cc (init_exception_handler): Make global. Take argument to
control exception handler being set.
(ctrl_c_handler): Wait forever when removing self from signal chain.
(_threadinfo::find_tls): Move to cygtls.cc.
(sig_handle): Reorganize detection for thread-specific signals.
* heap.cc (heap_init): Rework slightly. Make fatal error more verbose. Remove
malloc initialization since it can't happen during dll attach.
* init.cc (search_for): Move address to search for on stack here.
(threadfunc_ix): Ditto for stack offset. Make shared so that stack walk
potentially only has to be done once when cygwin processes are running.
(threadfunc_fe): Use standard tls to store thread function (may change back
later).
(calibration_thread): New function. Potentially called to find threadfunc_ix.
(munge_threadfunc): Search for "search_for" value on stack. Output warning
when thread func not found on stack. Use standard tls to store thread
function.
(prime_threads): New function. Called to prime thread front end.
(dll_entry): Call dll_crt0_0 here when DLL_PROCESS_ATTACH. Call prime_threads
here. Try to remove thread from signal list here.
* sigproc.cc (wait_sig): Initialize threadlist exception stuff here.
* thread.cc (pthread::exit): Pass argument to signal list remove function.
* thread.h: Remove obsolete *ResourceLock defines.
* tlsoffsets.h: Regenerate.
* winsup.h (spf): Define temporary debug macro to be deleted later.
* dcrt0.cc (dll_crt0_0): New function, called during DLL initialization.
Mainly consists of code pulled from dll_crt0_1.
(dll_crt0_1): See above.
(_dll_crt0): Wait for initial calibration thread to complete, if appropriate.
Move some stuff to dll_crt0_0.
(initialize_main_tls): Accommodate argument change to
_thread_info::init_thread.
* fork.cc (fork_child): Ditto.
(sync_with_child): Fix debug message.
* external.cc (cygwin_internal): Remove special considerations for
uninitialized dll since initialization happens during dll attach now.
* dlfcn.cc (dlopen): Remove obsolete *ResourceLock calls.
(dlclose): Ditto.
* cygheap.h (init_cygheap::close_ctty): Declare new function.
* cygheap.cc (init_cygheap::close_ctty): Define new function.
* syscalls.cc (close_all_files): Use close_ctty.
(setsid): Ditto.
* cygthread.cc (cygthread::stub): Remove exception initialization.
* cygthread.cc (cygthread::stub): Remove exception initialization.
(cygthread::simplestub): Ditto.
* thread.cc (pthread::thread_init_wrapper): Ditto.
* cygtls.cc (_last_thread): Make static.
(_threadinfo::call2): Initialize exception handler here.
(_threadinfo::find_tls): Move here.
* exceptions.cc (_threadinfo::find_tls): Move.
* dcrt0.cc (__api_fatal): Add prefix info to message here rather than including
it in every call to function.
* winsup.h (api_fatal): Accommodate above change.
* debug.cc (add_handle): Don't do anything if cygheap not around.
(mark_closed): Ditto.
* dll_init.cc (dll_list::detach): Fix debug output.
* fork.cc (sync_with_child): Ditto.
(vfork): Improve debug output.
* heap.cc (heap_init): Ditto.
* exceptions.cc (try_to_debug): Clarify message when debugger attaches.
environment variable after error_start detected.
* fhandler_tty_slave.cc (fhandler_tty_slave::close): Clarify debug message.
* syscalls.cc (setsid): Don't increment usecount here, since it will be
automatically decremented on close.
calculated mask in debugging output.
* sigproc.h (set_signal_mask): Reflect above change in declaration.
* path.cc (mount_item::build_win32): Take path apart before feeding it to
fnmunge. Throughout, change use of _reent_winsup()-> to _my_tls.locals.
instead. Throughout, remove obsolete MT_SAFE/_CYG_THREAD_FAILSAFE
considerations. Througout, add cygtls.h include.
* Makefile.in (DLL_OFILES): Add cygtls.o. Add some more objects to the
-fomit-frame-pointer list.
* acconfig.h: Remove obsolete settings.
* config.h.in: Ditto.
* bsdlib.cc: Add cygtls.h include.
* configure.in: Remove --enable-extra-threadsafe-checking.
* configure: Regenerate.
* cygtls.h (_local_storage): New struct renamed from _winsup_t (sic).
(_threadinfo:local_clib): Add new field.
(_threadinfo::locals): Ditto.
(_threadinfo::init_thread): Accept second _reent * argument.
(_threadinfo::call): Define as regparm.
(CYGTLS_PADSIZE): Remove unnecessary slop.
(_getreent): Define as a macro.
* thread.h: Remove _CYG_THREAD_FAILSAFE and MT_SAFE stuff.
(_winsup_t): Move to cygtls.h.
(ResourceLocks::ResourceLocks): Eliminate empty constructor.
(MTinterface::reents): Eliminate.
(MTinterface::thread_self_key): Eliminate.
(MTinterface::MTinterface): Eliminate.
* dcrt0.cc: Include stdio.h for _impure_ptr initialization.
(do_global_ctors): Remove run_ctors_p (sic) considerations. Don't call atexit
here.
(__main): Initialize destructors for user here.
(dll_crt0_1): Accept a dummy argument. Don't call init_thread here. Don't set
_impure_ptr here. Call do_global_ctors after more things have been
initialized.
(_dll_crt0): Define zeros buffer as max of needed size of CYGTLS_PADSIZE so
that it can be used for two purposes while minimizing stack usage. Initialize
_impure_ptr specifically, for speed. Call dll_crt0_1 with buffer argument.
(cygwin_dll_init): Call dll_crt0_1 with dummy argument.
* dtable.cc (dtable::find_unused_handle): Remove call to AssertResourceOwner.
* exceptions.cc: Move _threadinfo stuff to new file.
* cygtls.cc: New file.
* gentls_offsets: Accommodate increasing complexity of cygtls.h.
* hires.h (hires_base::~hires_base): Remove.
* init.cc (dll_entry): Remove setting of reents.
* thread.cc: Remove syslog.h include.
(__getreent): Simplify to use _my_tls.
(_reent_winsup): Delete.
(AssertResourceOwner): Delete.
(MTinterface::Init): Remove setting of _clib and _winsup, with all that
entails.
(MTinterface::fixup_after_fork): Ditto.
(pthread::thread_init_wrapper): Ditto. Also remove call to
set_tls_self_pointer.
(pthread::set_tls_self_pointer): Eliminate.
(pthread::get_tls_self_pointer): Just return _my_tls.tid;
(__reent_t::init_clib): Eliminate.
* tlsoffsets.h: Regenerate.
getsigmask.
* fhandler.h (fhandler_base): Make friends with close_all_files.
* pinfo.cc (_pinfo::set_ctty): Add more debugging.
* sigproc.cc (proc_can_be_signalled): Detect state when signal handler thread
is gone in target process as an EPERM situation. Set errno to ESRCH if process
doesn't exist.
(sigproc_terminate): Set sendsig to illegal value when closed.
(sig_send): Rely on proc_can_be_signalled setting the proper errno.
* syscalls.cc (close_all_files): Detect when all ttys are closed prior to
calling close_all_files. The ctty needs to be closed explicitly in this case.
cygthread::stub2. Just return from function now since ExitThread is guaranteed
by automatic _threadinfo wrapper. Define as per ThreadProc convention.
(cygthread::stub2): Remove.
(cygthread::simplestub): Perform similar operations to cygthread::stub.
(cygthread::simplestub2): Remove.
* cygthread.h (cygthread::stub): Declare as per ThreadProc convention.
(cygthread::stub2): Remove declaration.
(cygthread::simplestub): Declare as per ThreadProc convention.
(cygthread::simplestub2): Remove declaration.
* cygtls.h (_threadinfo::call): Define first argument as per ThreadProc
convention.
(_threadinfo::call2): Ditto.
(_tlsbase): Define as char * pointer.
(_tlstop): New definition.
(_main_tls): Define here.
* dcrt0.cc (alloc_stack): Revert previous change which called init_thread since
information would be overwritten by fork later anyway.
(dll_crt0_1): Use _tlsbase and _tlstop for setting stack bottom, top.
* exceptions.cc: Move _main_tls declaration to cygtls.h.
(_threadinfo::call): Define first argument as per ThreadProc convention.
(_threadinfo::call2): Call ExitThread with thread function return value.
(_threadinfo::init_thread): Don't initialize cygtls to zero if input arg is
NULL.
* fork.cc (fork_child): Reset _main_tls here. Reinitialize parts of _my_tls
after copying data from parent.
* init.cc (threadfunc_fe): New function. Front-end for all threads created in
cygwin processes.
(munge_threadfunc): New function.
(dll_entry): Call munge_threadfunc to force the call of a thread wrapper.
* thread.cc (pthread::thread_init_wrapper): Perform similar operations to
cygthread::stub.
(pthread::thread_init_wrapper2): Remove.
* thread.h (pthread::thread_init_wrapper): Declare as per ThreadProc
convention.
(pthread::thread_init_wrapper2): Remove declaration.
* window.cc (Winmain): Just return from function now since ExitThread is
guaranteed by automatic _threadinfo wrapper.
(_threadinfo::init_thread): Rename from 'init'.
(_threadinfo::init): Declare new function.
(_threadinfo::protect_linked_list): Declare new critical section.
* dcrt0.cc (dll_crt0_1): Call init_thread to initialize thread stuff.
(_dll_crt0): Call _threadinfo::init prior to invoking dll_crt0_1.
* exceptions.cc (_threadinfo::init_thread): Rename from 'init'.
(_threadinfo::init): Define new function. Protect linked list manipulation
with new critical section.
(_threadinfo::call): Reflect function name change.
(_threadinfo::remove): Protect linked list manipulation with new critical
section
* gentls_offsets: Rework to allow multi-line "don't parse this" protection.
* init.cc (dll_entry): Don't remove threads info stuff here since the remove
function uses a critical section which can't be used during thread creation or
destruction.
* thread.cc (pthread::exit): Call _threadinfo remove function here.
* exceptions.cc: Ditto.
* fhandler_termios.cc: Ditto.
* signal.cc: Ditto.
* sigproc.cc: Ditto.
* Makefile.in: Revert previous change which made a cygwin.din newer than a
version.h a warning rather than an error.
Christopher Faylor
Corinna Vinschen