After commit a0933cd17d19, access(_, X_OK) returns 0 if the user
holds SE_BACKUP_PRIVILEGE, even if the file's ACL denies execution
to the user. This is triggered by trying to open the file with
FILE_OPEN_FOR_BACKUP_INTENT.
Fix check_file_access() so it checks for X_OK without specifying
the FILE_OPEN_FOR_BACKUP_INTENT flag if the file is not a directory.
Rearrange function slightly and add comments for easier comprehension.
Fixes: a0933cd17d19 ("Cygwin: access: Correction for samba/SMB share")
Reported-by: Bruno Haible <bruno@clisp.org>
Co-authored-by: Takashi Yano <takashi.yano@nifty.ne.jp>
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Previously mmap with MAP_FIXED would fail with EINVAL on an attempt to
map an address range contained in the chunk of an existing mapping.
With this commit, mmap will succeed, provided the mappings are
anonymous, the MAP_SHARED/MAP_PRIVATE flags agree, and MAP_NORESERVE
is not set for either mapping.
Addresses: https://cygwin.com/pipermail/cygwin/2024-December/256901.html
Signed-off-by: Ken Brown <kbrown@cornell.edu>
Reportedly, the maximum pid of 65536 is much too small in bigger
environments. Raise the maximum PID to 4194304, whihc is the maximum
pid on Linux (PID_MAX_LIMIT defined in include/linux/threads.h).
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Previously, when unused pages from an mmap_record were recycled, they
were given the protection of the mmap_record rather than the
protection requested in the mmap call. Fix this by adding a
"new_prot" parameter to mmap_list::try_map() and
mmap_record::map_pages() to keep track of the requested protection.
Then use new_prot in the calls to VirtualProtect().
Addresses: https://cygwin.com/pipermail/cygwin/2024-December/256911.html
Fixes: f90e23f2714cb ("*autoload.cc (NtCreateSection): Define.")
Signed-off-by: Ken Brown <kbrown@cornell.edu>
If a realtime policy is selected, set the '(18) priority' field to the
negated sched_priority minus one. If SCHED_IDLE is selected, set it to
the lowest priority 39. Also set '(19) nice' to the originally requested
nice value. Ensure consistence with the current Windows priority in all
cases. Move the sched_priority from/to Windows priority mapping from
sched_get/setparam() to new functions in miscfuncs.cc.
Signed-off-by: Christian Franke <christian.franke@t-online.de>
Add SCHED_RESET_ON_FORK to <sys/sched.h>. If this flag is set, SCHED_FIFO
and SCHED_RR are reset to SCHED_OTHER and negative nice values are reset to
zero in each child process created with fork(2).
Signed-off-by: Christian Franke <christian.franke@t-online.de>
Add SCHED_BATCH to <sys/sched.h>. SCHED_BATCH is similar to SCHED_OTHER,
except that the nice value is mapped to a one step lower Windows priority.
Rework the mapping functions to ease the addition of this functionality.
Signed-off-by: Christian Franke <christian.franke@t-online.de>
cygpath automatically adds the root-local prefix \\?\ automatically
for paths exceeding 260 bytes. However, it does not add the root-local
prefix if the path contains path components invalid in DOS paths, for
instance path components with trailing dots or spaces.
Add the -r option to always add the root-local prefix to the path.
Add the option to the documentation and improve the help text.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Since commit 314c2d2fedc5f ("* syscalls.cc (try_to_bin): Handle remote
shares as well.") try_to_bin() transposes the .cyg prefix for temporary
files to invalid low surrogate halfs on filesystems setting the
FILE_UNICODE_ON_DISK flag.
This works on NTFS, but not necessarily on other filesystems, which often
require all chars in a filename to be valid Unicode chars. Fix this by
transposing into the private use area instead.
Fixes: 314c2d2fedc5f ("* syscalls.cc (try_to_bin): Handle remote shares as well.")
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Add SCHED_IDLE to <sys/sched.h>. If SCHED_IDLE is selected, preserve
the nice value and set the Windows priority to IDLE_PRIORITY_CLASS.
Signed-off-by: Christian Franke <christian.franke@t-online.de>
If SCHED_OTHER is selected, set the Windows priority according to the
nice value. If SCHED_FIFO or SCHED_RR is selected, preserve the nice
value and set the Windows priority according to the sched_priority
parameter.
Signed-off-by: Christian Franke <christian.franke@t-online.de>
Currently, the buffer of 128KB is passed to GetConsoleProcessList().
This causes page fault in the select() loop for console due to:
https://github.com/microsoft/terminal/issues/18264
because the previous code calls GetConsoleProcessList() with large
buffer and PeekConsoleInput() with small buffer alternately.
With this patch, the minimum buffer size is used that is determined
by GetConsoleProcessList() with small buffer passed.
Addresses: https://cygwin.com/pipermail/cygwin/2024-December/256841.html
Fixes: 72770148ad0a ("Cygwin: pty: Prevent pty from changing code page of parent console.")
Reported-by: Steven Buehler <buehlersj@outlook.com>
Signed-off-by: Takashi Yano <takashi.yano@nifty.ne.jp>
Return new nice value instead of 0 on success.
Set errno to EPERM instead of EACCES on failure.
Signed-off-by: Christian Franke <christian.franke@t-online.de>
Behave like sched_setparam() if the requested policy is identical
to the fixed value (SCHED_FIFO) returned by sched_getscheduler().
Fixes: 9a08b2c02eea ("* sched.cc: New file. Implement sched*.")
Signed-off-by: Christian Franke <christian.franke@t-online.de>
Windows silently sets a lower priority than requested if the new priority
requires administrator privileges. Revert to previous priority and fail
with EACCES or EPERM in this case.
Signed-off-by: Christian Franke <christian.franke@t-online.de>
Previously, two bugs exist in sigtimedwait(). One is, that since
_my_tls.sigwait_mask was left non-zero if the signal arrives after
the timeout, sigpacket::process() would wrongly try to handle it.
The other is if a timeout occurs after sigpacket::process() is
called, but not completed yet, the signal handler can be called
accidentally. If the signal handler is set to SIG_DFL or SIG_IGN,
access violation will occur in both cases.
With this patch, in sigwait_common(), check if sigwait_mask == 0
to confirm that sigpacket::process() cleared it. In this case,
do not treat WAIT_TIMEOUT, but call cygwait() again to retrieve
the signal. Furthermore, sigpacket::process() checks whether
timeout occurs in sigwait_common() and if timeout already happens,
do not treat the signal as waited. In both cases, to avoid race
issues, the code is guarded by cygtls::lock().
Addresses: https://cygwin.com/pipermail/cygwin/2024-November/256762.html
Fixes: 24ff42d79aab ("Cygwin: Implement sigtimedwait")
Reported-by: Christian Franke <Christian.Franke@t-online.de>
Reviewed-by: Corinna Vinschen <corinna@vinschen.de>
Signed-off-by: Takashi Yano <takashi.yano@nifty.ne.jp>
Currently, create_lock_obj() can create multiple locks with the same
lock range that have different version number. However, lf_setlock()
and lf_clearlock() cannot handle this case appropriately. With this
patch, make lf_setlock() and lf_clearlock() find overlap again even
when ovcase = 1 (lock and overlap have the same lock range).
Addresses: https://cygwin.com/pipermail/cygwin/2024-November/256750.html
Fixes: 2e560a092c1c ("* flock.cc (LOCK_OBJ_NAME_LEN): Change to accommodate extra lf_ver field.")
Reported-by: Sebastian Feld <sebastian.n.feld@gmail.com>
Reviewed-by: Corinna Vinschen <corinna@vinschen.de>
Signed-off-by: Takashi Yano <takashi.yano@nifty.ne.jp>
The commit ae181b0ff122 has a bug that the pointer is referred bofore
NULL check in the function lf_clearlock(). This patch fixes that.
Addresses: https://cygwin.com/pipermail/cygwin/2024-November/256750.html
Fixes: ae181b0ff122 ("Cygwin: lockf: Make lockf() return ENOLCK when too many locks")
Reported-by: Sebastian Feld <sebastian.n.feld@gmail.com>
Reviewed-by: Corinna Vinschen <corinna@vinschen.de>
Signed-off-by: Takashi Yano <takashi.yano@nifty.ne.jp>
Provide libaio.a for those projects (such as stress-ng) checking for
POSIX aio support by looking for this library at configure time.
A release note is provided for Cygwin 3.6.0.
Signed-off-by: Mark Geisert <mark@maxrnd.com>
Fixes: N/A (new code)
The pointer pfni gets allocated the buffer at the begin,
and is used in the NtQueryDirectoryFile call before the loops.
In the loop the pointer pfni is also used as iterator.
Therefore it holds no longer the initial buffer at the call
to NtQueryDirectoryFile in the while conditition at the bottom.
Fixes: 28fa2a72f8106 ("* syscalls.cc (check_dir_not_empty): Check surplus directory entries")
Co-authored-by: Corinna Vinschen <corinna@vinschen.de>
Signed-off-by: Bernhard Übelacker <bernhardu@mailbox.org>
Change the first parameter of pthread_sigqueue() to be a thread id rather
than a thread pointer. The change is to match the Linux implementation of
this function.
The user-visible function prototype is changed in include/pthread.h.
The pthread_sigqueue() function is modified to work with a passed-in thread
id rather than an indirect thread pointer as before. (It used to be
"pthread_t *thread", i.e., class pthread **.) The release note for Cygwin
3.5.5 is updated.
Reported-by: Christian Franke <Christian.Franke@t-online.de>
Addresses: https://cygwin.com/pipermail/cygwin/2024-September/256439.html
Signed-off-by: Mark Geisert <mark@maxrnd.com>
Fixes: 50350cafb375 ("* cygwin.din (pthread_sigqueue): Export.")
Previously, sigfe had a bug that the signal handler destroys fpu state.
This is caused by fninit instruction in sigdelayed. With this patch,
saving/restoring the FPU/SIMD state is done using fxsave/fxrstor or
xsave/xrstor rather than fnstcw/fldcw, stmxcsr/ldmxcsr and push/pop
xmm0-xmm15. Since xsave/xrstor is used, not only x87/MMX/SSE states
but also AVX/AVX2/AVX-512 states can be maintained unlike before.
Addresses: https://cygwin.com/pipermail/cygwin/2024-October/256503.html
Fixes: ed89fbc3ff11 ("* gendef (sigdelayed (x86_64)): Save and restore FPU control word.")
Reported-by: Christian Franke <Christian.Franke@t-online.de>
Suggested-by: Brian Inglis <Brian.Inglis@SystematicSW.ab.ca>
Reviewed-by: Corinna Vinschen <corinna@vinschen.de>
Signed-off-by: Takashi Yano <takashi.yano@nifty.ne.jp>
Previously, cygwin read pipe used non-blocking mode although non-
cygwin app uses blocking-mode by default. Despite this requirement,
if a cygwin app is executed from a non-cygwin app and the cygwin
app exits, read pipe remains on non-blocking mode because of the
commit fc691d0246b9. Due to this behaviour, the non-cygwin app
cannot read the pipe correctly after that. Similarly, if a non-
cygwin app is executed from a cygwin app and the non-cygwin app
exits, the read pipe mode remains on blocking mode although cygwin
read pipe should be non-blocking mode.
These bugs were provoked by pipe mode toggling between cygwin and
non-cygwin apps. To make management of pipe mode simpler, this
patch has re-designed the pipe implementation. In this new
implementation, both read and write pipe basically use only blocking
mode and the behaviour corresponding to the pipe mode is simulated
in raw_read() and raw_write(). Only when NtQueryInformationFile
(FilePipeLocalInformation) fails for some reasons, the raw_read()/
raw_write() cannot simulate non-blocking access. Therefore, the pipe
mode is temporarily changed to non-blocking mode.
Moreover, because the fact that NtSetInformationFile() in
set_pipe_non_blocking(true) fails with STATUS_PIPE_BUSY if the pipe
is not empty has been found, query handle is not necessary anymore.
This allows the implementation much simpler than before.
Addresses: https://github.com/git-for-windows/git/issues/5115
Fixes: fc691d0246b9 ("Cygwin: pipe: Make sure to set read pipe non-blocking for cygwin apps.");
Reported-by: isaacag, Johannes Schindelin <Johannes.Schindelin@gmx.de>
Reviewed-by: Corinna Vinschen <corinna@vinschen.de>, Ken Brown <kbrown@cornell.edu>
Signed-off-by: Takashi Yano <takashi.yano@nifty.ne.jp>
There was a long-standing issue that pseudo console ownership could
not hand over from the process whose ctty is /dev/cons* rather than
/dev/pty*. This problem happens when a cygwin app starts non-cygwin
app in a pty, then the non-cygwin app starts multiple cygwin apps,
and the non-cygwin app ends before the second cygwin apps end.
In this case, the stub process of the non-cygwin app hands over the
ownership of pcon to one of the second cygwin apps, however, this
app does not hand over the ownership of pcon to another second
cygwin app. This is due to the fact that the hand-over feature is
implemented only in fhandler_pty_slave but not in fhandler_console.
With this patch, the second cygwin apps check if their console device
is inside a pseudo console, and if so, it tries to hand over the
ownership of the pseudo console to anther process that is attached
to the same pseudo console.
Addresses: https://cygwin.com/pipermail/cygwin/2024-February/255388.html
Fixes: 253352e796ff ("Cygwin: pty: Allow multiple apps to enable pseudo console simultaneously.")
Reported-by: lmari Lauhakangas <ilmari.lauhakangas@libreoffice.org>, Hossein Nourikhah <hossein@libreoffice.org>
Signed-off-by: Takashi Yano <takashi.yano@nifty.ne.jp>
Previously, lockf() printed a warning message when the number of locks
per file exceeds the limit (MAX_LOCKF_CNT). This patch makes lockf()
return ENOLCK in that case rather than printing the warning message.
Addresses: https://cygwin.com/pipermail/cygwin/2024-October/256528.html
Fixes: 31390e4ca643 ("(inode_t::get_all_locks_list): Use pre-allocated buffer in i_all_lf instead of allocating every lock. Return pointer to start of linked list of locks.")
Reported-by: Christian Franke <Christian.Franke@t-online.de>
Reviewed-by: Corinna Vinschen <corinna@vinschen.de>
Signed-off-by: Takashi Yano <takashi.yano@nifty.ne.jp>
Previously, adding a new lock by lockf() over multiple existing locks
failed. This is due to a bug that lf_setlock() tries to create a lock
that has already been created. This patch fixes the issue.
Addresses: https://cygwin.com/pipermail/cygwin/2024-October/256528.html
Fixes: a998dd705576 ("* flock.cc: Implement all advisory file locking here.")
Reported-by: Christian Franke <Christian.Franke@t-online.de>
Reviewed-by: Corinna Vinschen <corinna@vinschen.de>
Signed-off-by: Takashi Yano <takashi.yano@nifty.ne.jp>
timer_delete() always returned failure. This issue has been
detected by 'stress-ng --hrtimers 1'.
Fixes: 229ea3f23c015 ("Cygwin: posix timers: reimplement using OS timer")
Signed-off-by: Christian Franke <christian.franke@t-online.de>
If the parent process has already used pread() or pwrite(), these
functions fail with EBADF if used on the inherited fd. Ensure that
fix_after_fork() is called to invalidate the prw_handle. This issue
has been detected by 'stress-ng --pseek 1'.
Fixes: c36cd56c548a ("* fhandler.cc (fhandler_base::open): Drop local create_options variable.")
Signed-off-by: Christian Franke <christian.franke@t-online.de>
After the commit 7f3c22532577, writing to pipe extremely slows down.
This is because cygwait(select_sem, 10, cw_cancel) is called even
when write operation is already completed. With this patch, the
cygwait() is called only if the write operation is not completed.
Addresses: https://cygwin.com/pipermail/cygwin/2024-August/256398.html
Fixes: 7f3c22532577 ("Cygwin: pipe: handle signals explicitely in raw_write")
Reported-by: Jim Reisert AD1C <jjreisert@alum.mit.edu>
Reviewed-by: Corinna Vinschen <corinna@vinschen.de>
Signed-off-by: Takashi Yano <takashi.yano@nifty.ne.jp>
When win32-input-mode (which is supported by Windows Termainal) is
set by "\033[?9001h", cons_master_thread does not work properly and
consumes larger and larger memory space. This is because sending
event by WriteConsoleInput() is translated into the sequence that
is used by win32-input-mode. Due to this behaviour, write-back
of the INPUT_RECORDs does not work as expected. With this patch,
cons_master_thread is disabled on win32-input-mode where the signal
keys such as Ctrl-C, Ctrl-Z etc. never comes.
Addresses: https://cygwin.com/pipermail/cygwin/2024-August/256380.html
Fixes: ff4440fcf768 ("Cygwin: console: Introduce new thread which handles input signal.")
Reported-by: Adamyg Mob <adamyg.mob@gmail.com>
Signed-off-by: Takashi Yano <takashi.yano@nifty.ne.jp>
Previously, shared names in the console were created using get_minor().
However, get_minor() was not unique to the console across sessions.
This is because EnumWindows(), which is used to look for console windows,
cannot enumerate windows across sessions. This causes conflict on the
shared names between sessions (e.g. sessions of different users,
different services, a service and a user session, etc.).
With this patch, GetConsoleWindow() is used instead of get_minor().
GetConsoleWindow() has been used for the name of shared memory, which
should be unique to each console.
Addresses: https://cygwin.com/pipermail/cygwin/2024-April/255893.html
Fixes: ff4440fcf768 ("Cygwin: console: Introduce new thread which handles input signal.");
Reported-by: Johannes Khoshnazar-Thoma <johannes@johannesthoma.com>
Signed-off-by: Takashi Yano <takashi.yano@nifty.ne.jp>
Previsouly, the following commands hangs:
mintty -e timeout 1 dash -c 'yes aaaaaaaaaaaaaaaaaaaaaaaaa | cat'
The mechanism is as follows.
When the child process (timeout) is terminated, mintty seems to stop
reading pty master even if yes or cat still alive.
If the the pipe used to transfer output from pty slave to pty master
is full due to lack of master reader, WriteFile() to the pipe is
blocked. WriteFile() cannot be canceled by cygwin signal, therefore,
pty slave hangs.
This patch avoids hanging by checking pipe space before calling
WriteFile() and prevents writing data more than space.
Addresses: https://cygwin.com/pipermail/cygwin/2024-June/256178.html
Reported-by: jojelino <jojelino@gmail.com>
Signed-off-by: Takashi Yano <takashi.yano@nifty.ne.jp>
If ldd is run against a DLL which links to the Cygwin DLL, ldh will end
up loading the Cygwin DLL dynamically, much like cygcheck or strace.
Addresses: https://cygwin.com/pipermail/cygwin/2024-May/255991.html
Fixes: 60675f1a7eb2 ("Cygwin: decouple shared mem regions from Cygwin DLL")
Reviewed-by: Ken Brown <kbrown@cornell.edu>, Takashi Yano <takashi.yano@nifty.ne.jp>
Signed-off-by: Jeremy Drake <cygwin@jdrake.com>
To avoid race issues, pthread::once() uses pthread_mutex. This caused
the handle leak which was fixed by the commit 2c5433e5da82. However,
this fix introduced another race issue, i.e., the mutex may be used
after it is destroyed. This patch fixes the issue. Special thanks to
Bruno Haible for discussing how to fix this.
Addresses: https://cygwin.com/pipermail/cygwin/2024-May/255987.html
Reported-by: Bruno Haible <bruno@clisp.org>
Fixes: 2c5433e5da82 ("Cygwin: pthread: Fix handle leak in pthread_once.")
Reviewed-by: Ken Brown <kbrown@cornell.edu>
Signed-off-by: Takashi Yano <takashi.yano@nifty.ne.jp>
While commit 0321fb573654 ("Cygwin: glob: convert wchar_t to wint_t")
switched the entire glob mechanism from wchar_t to wint_t, the globify
function calling glob on a DOS command line did not catch up and only
checked for the next character constituting a 16 bit wchar_t. This
broke reading surrogate pairs from incoming DOS command lines if the
string had to go through glob(3).
Check for an entire 32 bit unicode char instead.
Fixes: 0321fb573654 ("Cygwin: glob: convert wchar_t to wint_t")
Reported-by: David Allsopp <david@tarides.com>
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
If FILE_DIRECTORY_FILE is given, FILE_OPEN_NO_RECALL is not allowed,
otherwise NtCreateFile returns STATUS_INVALID_PARAMETER.
Drop FILE_OPEN_NO_RECALL where FILE_DIRECTORY_FILE is specified.
Fixes: f6b56abec186 ("Cygwin: try to avoid recalling offline files")
Reported-by: Bruce Jerrick <bmj001@gmail.com>
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Continue using WSD for enumerating //, but switch back to
WNet for enumerating shares.
Add trying to enumerate NFS shares for machine names given as FQDN.
Only downcase server names, keep case of shares intact.
Move downcasing into dir_cache class.
Add a comment to explain an extrem weirdness in Windows.
Fixes: 205190a80bd0 ("Cygwin: // and //server: switch to Network Discovery")
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
SMBv1 is ultimately deprecated since Novemer 2023. It's also
not installed by default on latest Windows versions.
Drop using the WNet (SMBv1) API in favor of using Network Discovery.
Given there's no documented Win32 API for that, the code now uses
the Shell API.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
This reverts commit a51147467e6cf58618433286f93d17043e00b0fc.
Dumb thinko on my part. What was supposed to be an optimization
actually broke caseinsensitive globbing in that the entire input
of globbed expressions were downcased.
Drop the unused CCHAR() macro nevertheless.
Fixes: a51147467e6cf ("Cygwin: glob: perform ignore_case_with_glob on input")
Reported-by: Michael Goldshteyn <mgold10000@gmail.com>
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
