2005-12-05 Paolo Bonzini <bonzini@gnu.org>
Sync with gcc:
2005-12-05 Paolo Bonzini <bonzini@gnu.org>
* configure.in (CONFIGURED_BISON, CONFIGURED_YACC, CONFIGURED_M4,
CONFIGURED_FLEX, CONFIGURED_LEX, CONFIGURED_MAKEINFO): Remove
"CONFIGURED_" from the AC_CHECK_PROGS invocation. Move below.
Find in-tree tools if available.
(EXPECT, RUNTEST, LIPO, STRIP): Find them and substitute them.
(CONFIGURED_*_FOR_TARGET): Don't set nor substitute.
(*_FOR_TARGET): Set them with GCC_TARGET_TOOL.
(COMPILER_*_FOR_TARGET): New.
* Makefile.tpl (HOST_EXPORTS): Add *_FOR_TARGET symbols that gcc needs.
(BASE_TARGET_EXPORTS): Use COMPILER_*_FOR_TARGET symbols.
(CONFIGURED_*, USUAL_*): Remove.
(BISON, YACC, FLEX, LEX, M4, MAKEINFO, EXPECT, RUNTEST, LIPO,
STRIP): Use autoconf substitutions.
(COMPILER_AS_FOR_TARGET, COMPILER_LD_FOR_TARGET,
COMPILER_NM_FOR_TARGET): New.
(EXTRA_HOST_FLAGS): Pass LIPO and STRIP.
(all): Make all-host and all-target in parallel.
(do-[+make_target+], do-check, install, [+compare-target+]): Ensure
that $$r and $$s are set before invoking a recursive make.
(stage[+id+]-bubble): Likewise, and invoke the comparison at the end.
([+bootstrap-target+]): Inline most of the `all' target.
2005-11-29 Ben Elliston <bje@au.ibm.com>
* Makefile.tpl (clean-target-libgcc): Invoke clean-target-libgcc
from the gcc build directory.
* Makefile.in: Regenerate.
2005-11-29 Ben Elliston <bje@au.ibm.com>
* Makefile.def: Add new libdecnumber host_module. Make all-gcc
depend on all-libdecnumber.
* configure.in (host_libs): Include libdecnumber.
* Makefile.in: Regenerate.
* configure: Likewise.
2005-11-21 Kean Johnston <jkj@sco.com>
* config.sub, config.guess: Sync from upstream sources.
config:
2005-12-05 Paolo Bonzini <bonzini@gnu.org>
* acx.m4 (GCC_TARGET_TOOL): New.
2005-08-12 Paolo Bonzini <bonzini@gnu.org>
* configure.in: Replace NCN_STRICT_CHECK_TOOL with
NCN_STRICT_CHECK_TOOLS, and likewise for NCN_STRICT_CHECK_TARGET_TOOLS.
Look for alternate names of the target cc and c++
config:
2005-08-12 Paolo Bonzini <bonzini@gnu.org>
* config/acx.m4 (NCN_CHECK_TARGET_TOOL, NCN_STRICT_CHECK_TOOL,
NCN_STRICT_CHECK_TARGET_TOOL): Remove.
(NCN_STRICT_CHECK_TOOLS, NCN_STRICT_CHECK_TARGET_TOOLS): New,
Sync from gcc:
2005-04-22 Bernd Schmidt <bernd.schmidt@analog.com>
* config.sub: Update from master copy.
2005-04-19 Hans-Peter Nilsson <hp@axis.com>
* configure.in <crisv32-*-*, cris-*-*>: New local variable
libgcj_ex_libffi. Have specific match for *-*-linux*. Separate
matches for "*-*-aout" and "*-*-elf". Don't disable libffi for
"*-*-elf" and "*-*-linux*".
* configure: Regenerate.
config:
2005-04-29 Paolo Bonzini <bonzini@gnu.org>
* acx.m4 (ACX_PROG_GNAT): Remove stray break.
* Makefile.def: Remove libstdcxx_incdir, libsubdir, gxx_include_dir,
gcc_version, and gcc_version_trigger from set of flags to pass.
* Makefile.tpl: Remove definitions of above variables.
(config.status): Remove dependency on $(gcc_version_trigger).
* Makefile.in: Regenerate.
* configure.in: Do not reference config/gcc-version.m4 nor
config/gxx-include-dir.m4. Do not invoke TL_AC_GCC_VERSION nor
TL_AC_GXX_INCLUDE_DIR. Do not set gcc_version_trigger.
* configure: Regenerate.
config:
* gxx-include-dir.m4: In all substitutions, leave $(gcc_version)
to be expanded by the Makefile.
Sync from gcc.
2005-02-28 Paolo Bonzini <bonzini@gnu.org>
PR bootstrap/17383
* Makefile.def (target_modules): Remove "stage", now unnecessary.
* Makefile.tpl (HOST_SUBDIR): New substitution.
(STAGE_HOST_EXPORTS, EXPECT, HOST_LIB_PATH, USUAL_AR_FOR_TARGET,
USUAL_AS_FOR_TARGET, USUAL_DLLTOOL_FOR_TARGET, USUAL_GCC_FOR_TARGET,
USUAL_LD_FOR_TARGET, USUAL_NM_FOR_TARGET, USUAL_OBJDUMP_FOR_TARGET,
USUAL_RANLIB_FOR_TARGET, USUAL_WINDRES_FOR_TARGET): Use it.
(Host modules, Bootstrapped modules): Use it.
(Build modules, Target modules): Do not create symlink trees,
always configure out-of-srcdir.
(distclean): Try removing $(host_subdir) with rm before using rm -rf.
* configure.in (FLAGS_FOR_TARGET, CC_FOR_TARGET, GCJ_FOR_TARGET,
GFORTRAN_FOR_TARGET, CXX_FOR_TARGET, RAW_CXX_FOR_TARGET): Use
$(HOST_SUBDIR). Create a symlink for host_subdir.
* Makefile.in: Regenerate.
* configure: Regenerate.
Merged from libada-gnattools-branch:
2004-11-28 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.def: Add gnattools as a module, depending on target-libada.
* Makefile.in: Regenerate.
* configure.in: Include gnattools in host_tools; disable it if ada
is disabled.
* configure: Regenerate.
config:
2005-02-28 Paolo Bonzini <bonzini@gnu.org>
PR bootstrap/17383
* acx.m4 (GCC_TOPLEV_SUBDIRS): Set HOST_SUBDIR if an in-src
gcc build is going.
* Add ACX_{TARGET,HOST,BUILD}_NONCANONICAL,
which do an automatic AC_SUBST on _GCC_TOPLEV_*_NONCANONICAL.
The intention is that we will migrate to these bit by bit.
2004-08-01 Robert Millan <robertmh@gnu.org>
* configure.in: Turn mt-linux into mt-gnu. Use mt-gnu and enable
libmudflap for all GNU-based systems (with Glibc).
* configure: Regenerate.
config/ChangeLog:
2004-08-01 Robert Millan <robertmh@gnu.org>
* mt-linux: Rename to ...
* mt-gnu: ... this.
* Makefile.tpl (touch-stage[+id+]): New.
(restage[+prev+]): Depend on touch-stage[+id+].
* Makefile.tpl (RECURSE_FLAGS_TO_PASS): New.
Use it throughout.
* Makefile.def: Add profile and feedback bootstrap stages.
Remove next field from bootstrap stages.
* Makefile.tpl (LN, LN_S): Substitute.
(stageN-start, stageN-end): Use double-colon rules, to
provide a hook for additional setup commands.
(distclean-stageN-gcc, restageN): Create dependencies from
[+prev+], not from [+next+].
(stageN-bubble): Add commands for successive stages from
[+prev+], using double-colon rules.
(all-stageN-gcc): Fix typo.
(stagefeedback-start, profiledbootstrap): New.
* Makefile.in: Regenerate.
* configure.in: Call ACX_PROG_LN.
* configure: Regenerate.
config/ChangeLog:
2004-06-09 Paolo Bonzini <bonzini@gnu.org>
* acx.m4 (ACX_PROG_LN): From gcc, modified to
accept a parameter.
2004-03-11 Nathanael Nerode <neroden@gcc.gnu.org>
* configure: Regenerate.
2004-03-08 Paolo Bonzini <bonzini@gnu.org>
PR ada/14131
Move language detection to the top level.
* configure.in: Find default values for the tools as
soon as possible. Disable ada if GNAT is not found.
Emit error message about missing languages. Expand
--enable-languages=all for the gcc subdirectory.
(config)
2004-03-08 Paolo Bonzini <bonzini@gnu.org>
PR ada/14131
Move language detection to the top level.
* acx.m4 (ACX_PROG_GNAT): New macro, moved here
from the gcc subdirectory.
2004-03-09 Hans-Peter Nilsson <hp@axis.com>
* accross.m4 (AC_C_BIGENDIAN_CROSS): Compile endian probe with
"-c". Properly quote parameter for AC_MSG_ERROR.
2003-07-07 Zack Weinberg <zack@codesourcery.com>
* gettext.m4: Delete all former contents.
(ZW_GNU_GETTEXT_SISTER_DIR): New macro.
* progtest.m4: New file.
2003-07-04 Zack Weinberg <zack@codesourcery.com>
* gettext.m4: New file - copy of gettext.m4 from binutils
* configure.in: Switch more things to use maybe dependencies.
Rearrange a little. Use GCC_TOPLEV_SUBDIRS.
* configure: Regenerate.
* Makefile.tpl: Switch more things to use maybe dependencies.
* Makefile.in: Regenerate.
<config>
* config/acx.m4: Introduce _GCC_TOPLEV_NONCANONICAL_BUILD,
_GCC_TOPLEV_NONCANOICAL_HOST, _GCC_TOPLEV_NONCANONICAL_TARGET,
GCC_TOPLEV_SUBDIRS.
(NCN_STRICT_CHECK_TOOL): If program is not found and
value-if-not-found is empty, use ${ncn_tool_prefix}$2 or $2,
depending on whether build != host or not.
(NCN_STRICT_CHECK_TARGET_TOOL): Ditto, with the target prefix.
* config/mh-dgux386: remove dead code
* config/mh-hp300: remove dead code
* config/mh-hpux: remove dead code
* config/mh-hpux8: remove dead code
* config/mh-irix5: remove dead code
* config/mh-irix6: remove dead code
* config/mh-ncr3000: remove dead code
* config/mh-ncrsvr43: remove dead code
* config/mh-necv4: remove dead code
* config/mh-sco: remove dead code
* config/mh-solaris: remove dead code
* config/mh-sysv: remove dead code
* config/mh-sysv4: remove dead code
* config/mh-sysv5: remove dead code
* config/mh-irix4: remove, contains only dead code
* configure.in: delete reference to absent file
* config/mh-a68bsd: clean out dead code
* config/mh-apollo68: clean out dead code
* config/mh-cxux: clean out dead code
* config/mh-decstation: clean out dead code
* config/mh-dgux: clean out dead code
* config/mh-dgux386: clean out dead code
* config/mh-hp300: clean out dead code
* config/mh-hpux: clean out dead code
* config/mh-hpux8: clean out dead code
* config/mh-interix: clean out dead code
* config/mh-irix4: clean out dead code
* config/mh-lynxrs6k: clean out dead code
* config/mh-mingw32: clean out dead code
* config/mh-ncr3000: clean out dead code
* config/mh-ncrsvr43: clean out dead code
* config/mh-necv4: clean out dead code
* config/mh-openedition: clean out dead code
* config/mh-riscos: clean out dead code
* config/mh-sco: clean out dead code
* config/mh-sysv4: clean out dead code
* config/mh-lynxos: removed, contained only dead code
* config/mh-vaxult2: removed, contained only dead code
* config/mh-sun3: removed, contained only dead code
* configure.in: remove references to dead files
Paolo Bonzini
Tom Tromey
Mark Mitchell
R. Kelley Cook
DJ Delorie
Zack Weinberg
Joseph Myers
Richard Sandiford
H.J. Lu
Nathanael Nerode
Maciej W. Rozycki
Daniel Jacobowitz
Alexandre Oliva
Christopher Faylor
Stan Shebs
Martin Schwidefsky
Keith Seitz