(child_info::retry): Move here from fork subclass.
(child_info::exit_code): New field.
(child_info::retry_count): Max retry count for process start.
(child_info::proc_retry): Declare new function.
(child_info_fork::retry): Move to parent.
(child_info_fork::fork_retry): Ditto.
* dcrt0.cc (child_info::fork_retry): Rename and move.
(child_info_fork::handle_failure): Move.
(dll_crt0_0): Initialize console handler based on whether we have a controlling
tty or not. Avoid nonsensical check for fork where it can never occur.
* environ.cc (set_proc_retry): Rename from set_fork_retry. Set retry_count in
child_info.
(parse_thing): Reflect above change.
* exceptions.cc (dummy_ctrl_c_handler): Remove unused variable name.
(ctrl_c_handler): Always return TRUE for the annoying CTRL_LOGOFF_EVENT.
* fhandler_termios.cc (fhandler_termios::tcsetpgrp): Remove call to
init_console_handler.
* fhandler_tty.cc (fhandler_tty_slave::open): Just call mange_console_count
here and let it decide what to do with initializing console control handling.
* fork.cc (fork_retry): Remove definition.
(frok::parent): Define static errbuf and use in error messages (not thread safe
yet). Close pi.hThread as soon as possible. Protect pi.hProcess as soon as
possible. Don't set retry_count. That happens automatically in the
constructor now. Accommodate name change from fork_retry to proc_retry.
* init.cc (dll_entry): Turn off ctrl-c handling early until we know how it is
supposed to be handled.
* pinfo.cc (_pinfo::dup_proc_pipe): Remember original proc pipe value for
failure error message. Tweak debug message slightly.
* sigproc.cc (child_info::retry_count): Define.
(child_info::child_info): Initialize retry count.
(child_info::sync): Set exit code if process dies before synchronization.
(child_info::proc_retry): Rename from child_info_fork::fork_retry. Use
previously derived exit code. Be more defensive about what is classified as an
error exit.
(child_info_fork::handle_failure): Move here from dcrt0.cc.
* spawn.cc (spawn_guts): Maintain error mode when starting new process to avoid
annoying pop ups. Move deimpersonate call within new loop. Move envblock
freeing to end. Loop if process dies prematurely with bad exit code.
* syscalls.cc (init_console_handler): Remove hopefully unneeded call to
init_console_handler.
on NT since it is the logical start time of the "process".
* pinfo.cc (set_myself): Don't set start time when it should have already been
set previously.
* cygtls.h (_cygtls::thread_context): Declare new field.
(_cygtls::thread_id): Ditto.
(_cygtls::signal_exit): Move into this class.
(_cygtls::copy_context): Declare new function.
(_cygtls::signal_debugger): Ditto.
* cygtls.cc (_cygtls::init_thread): Fill out thread id field.
* exceptions.cc (exception): Change message when exception info is unknown.
Copy context to thread local storage.
(_cygtls::handle_exceptions): Avoid double test for fault_guarded. Reflect
move of signal_exit to _cygtls class.
(sigpacket::process): Copy context to thread local storage.
(_cygtls::signal_exit): Move to _cygtls class. Call signal_debugger to notify
debugger of exiting signal (WIP). Call stackdump here (WIP).
(_cygtls::copy_context): Define new function.
(_cygtls::signal_debugger): Ditto.
* tlsoffsets.h: Regenerate.
* include/cygwin.h (_fpstate): New internal structure.
(ucontext): Declare new structure (WIP).
(__COPY_CONTEXT_SIZE): New define.
* exceptions.cc (_cygtls::interrupt_setup): Clear "threadkill" field when there
is no sigwaiting thread.
(setup_handler): Move event handling into interrupt_setup.
* child_info.h (CURR_CHILD_INFO_MAGIC): Reset.
(child_info::dwProcessId): Delete.
(child_info::straced): New variable.
(child_info::handle_fork): New member function.
* dcrt0.cc (in_forkee): New global variable.
(__cygwin_user_data::forkee): Mark as obsolete.
(do_global_ctors): Use in_forkee rather than user_data->forkee.
(get_cygwin_startup_info): Ditto. Deal with new straced field to allow strace
to deal with children of attached processes.
(initial_env): Accommodate changes to strace::hello.
(child_info_fork::handle_fork): Rename from plain old 'handle_fork'. Move
alloc_stack() call elsewhere.
(dll_crt0_0): Fill out more of user_data. Reference handle_fork via fork_info.
Add some debugging output.
(_dll_crt0): Don't wait for sync thread if sync_startup is invalid. Zero
sync_startup here. Call alloc_stack() here, if appropriate.
(dll_crt0_1): Use in_forkee rather than user_data->forkee.
(dll_crt0): Ditto.
* malloc_wrapper.cc (malloc_init): Ditto.
* dll_init.cc (in_forkee): Remove local static version of this variable.
(dll_list::load_after_fork): Don't set in_forkee here.
* external.cc (cygwin_internal): Use strace method rather than accessing field
directly.
* fhandler.cc (fhandler_base::read): Ditto.
* fhandler_tty.cc (fhandler_tty_common::__acquire_output_mutex): Ditto.
* fork.cc (frok::parent): Invoke strace write_childpid to communicate with
potential strace.
(child_copy): Add more detail to debugging output.
* init.cc (calibration_id): New static variable.
(prime_threads): Set sync_startup to invalid handle if we already know about
thread_func_ix. Use static calibration_id to hold calibration thread id.
* munge_threadfunc (munge_threadfunc): Don't try to debug if we don't find
threadfunc_ix.
(dll_entry): Avoid calling munge_threadfunc and _cygtls::remove on non-cygwin
threads invoked during process startup.
* pinfo.cc (set_myself): Always call strace.hello here regardless of DEBUGGING.
* sigproc.cc (child_info::child_info): Remove spurious handling of dwProcessId.
Set straced as appropriate.
* spawn.cc (spawn_guts): Rename ciresrv to ch. Invoke strace write_childpid to
communicate with potential strace.
* strace.cc: Include child_info.h.
(strace::hello): Remove inited test. Use active() method to test if strace has
been activated. Handle case where we are started before
(mypid): New function.
(strace::vsprntf): Try to deal more intelligently with case where progname may
not be filled out. Put pid in parentheses if it is a windows pid rather than a
cygwin pid. myself has been filled out.
(strace::write_childpid): New function for notifying strace about the creation
of children.
(strace::vprntf): Use strace method rather than accessing field directly.
(strace_printf): Ditto.
(strace::wm): Ditto.
* winsup.h (in_forkee): Declare.
* include/sys/strace.h (strace::write_childpid): Declare new function.
(strace::attached): Define new function.
(strace::active): Ditto.
(strace::active_val): Ditto.
(_STRACE_ON): Delete.
(_STRACE_OFF): Ditto.
(define_strace0): Use strace method rather than accessing field directly.
(strace_printf_wrap): Ditto.
(strace_printf_wrap1): Ditto.
*** cygwin utils changes:
* strace.cc (nprocesses): Make static global.
(quiet): New variable.
(strace_active): Ditto.
(add_child): Increment nprocesses here. Don't add a child if it is already
added (windows bug?). Report on child if not quiet.
(get_child): Just return NULL if child not found.
(remove_child): Report on child if not quiet.
(attach_process): Don't complain if given a windows process. Use windows pid
in error.
(handle_output_debug_string): Issue error if trying to manipulate a process
that we don't know about. Handle _STRACE_CHILD_PID - attach to reported child
when we get this.
(proc_child): Move nprocesses to file scope. Report on exceptions.
(longopts): Implement "--quiet".
(opts): Implement "-q".
(main): Manipulate quiet flag.
* utils.sgml (strace): Add words describing '-q'.
(do_exit): Move minimal_printf...
* pinfo.cc (pinfo::exit): ...into here.
* strace.cc (strace::vprntf): Guarantee output to the console when
system_printf/api_fatal.
* heap.cc (heap_init): Wait a second before issuing an error when
ERROR_INVALID_ADDRESS since this is probably due to a CTRL-C handler sneaking
in, using the memory that we want to use for the heap, and, eventually exiting.
* cygtls.h (sockaddr_in): Use header rather than defining our own structure.
* exceptions.cc (_cygtls::interrupt_setup): Use exact contents of sa_mask
rather than assuming tht current sig should be masked, too.
(_cygtls::call_signal_handler): Use more aggressive locking.
* gendef (_sigbe): Wait until later before releasing incyg.
(_sigreturn): Remove more arguments to accommodate quasi-sa_sigaction support.
(_sigdelayed): Push arguments for sa_sigaction. More work needed here.
* signal.cc (sigaction): Implement SA_NODEFER.
* tlsoffsets.h: Regenerate.
* sigproc.cc (wait_sig): Use default buffer size of Windows 9x complains.
* pinfo.cc (_onreturn::dummy_handle): Remove.
(_onreturn::h): Make this a pointer.
(_onreturn::~_onreturn): Detect whether pointer is NULL rather than value is
NULL.
(_onreturn::_onreturn): Set h to NULL initially.
(_onreturn::no_close_p_handle): Set h to NULL.
(winpids::add): Initialize onreturn with value from p.hProcess immediately.
(_onreturn): New helper class.
(winpids:add): Remove copied stuff. Try to put process handle into pinfo in
question and use _onreturn class to control when to close it.
(winpids::release): Remove use of copied array. Free procinfo when hProc is
NULL. Otherwise call release and call CloseHandle on hProc.
* pinfo.h (winpids::copied): Remove throughout class.
(winpids::add): Alias the element that we are working on for slightly better
clarity. Honor the "make_copy" flag.
(winpids::release): Free and zero procinfo field if it was allocated via
malloc.
(winpids::~winpids): Free copied array.
* pinfo.h (class pinfo): Make winpids class a friend.
(winpids::make_copy): New field.
(winpids::copied): New array.
(winpids::reset): Reset npids after releasing pinfos or suffer a memory leak.
(winpids::winpids): Try harder to allocate all fields in the class.
whenever ctty == -1 regardles of whetehr there's a windows station already
assigned. Close the old windows station in this situation.
* pinfo.cc (_pinfo::set_ctty): Reinstate incrementing of console count when
recording ctty so that the current tty is always around.
(fhandler_console::fixup_after_fork): Use fixup_after_fork_exec.
(fhandler_console::fixup_after_exec): Ditto.
* fhandler_console.cc (fhandler_console::fixup_after_fork): Delete definition.
(fhandler_console::fixup_after_fork_exec): Rename from fixup_after_exec.
* pinfo.cc (_pinfo::set_ctty): Don't play with console count here.
* syscalls.cc (close_all_files): Don't close cygheap ctty if hExeced since the
child will be copying information from us.
(setsid): Use myctty() rather than raw ctty #.
(init_cygheap::console_count): Renamed from open_fhs. Make private.
* cygheap.cc (init_cygheap::manage_console_count): Define new function.
* dtable.cc (dtable::fixup_after_exec): Always call fixup_after_exec on
elements of fd even when they are about to be closed.
* fhandler.h (report_tty_counts): Remove open_fhs from debugging output.
* fhandler_console.cc (fhandler_console::open): Use manage_console_count rather
than manipulating count directly.
(fhandler_console::close): Ditto.
(fhandler_console::fixup_after_fork): Ditto.
(fhandler_console::fixup_after_exec): Ditto. Don't close handles if
close_on_exec.
* fhandler_tty.cc (fhandler_tty_slave::open): Use manage_console_count() rather
than manipulating count directly. Reflect change in arguments to
report_tty_counts().
(fhandler_tty_slave::close): Ditto for both.
(fhandler_tty_slave::dup): Ditto for both.
(fhandler_tty_slave::ioctl): Use myctty() rather than raw ctty #.
(fhandler_tty_slave::fixup_after_fork): Reflect change in arguments to
report_tty_counts().
(fhandler_tty_master::init_console): Use manage_console_count() rather than
manipulating count directly.
* fhandler_clipboard.cc (fhandler_dev_clipboard::fixup_after_exec): Don't
perform any operations if close_on_exec.
* fhandler_dsp.cc (fhandler_dev_dsp::fixup_after_exec): Ditto.
* fhandler_raw.cc (fhandler_dev_raw::fixup_after_exec): Ditto.
* fhandler_serial.cc (fhandler_serial::fixup_after_exec): Ditto.
* pinfo.h (_pinfo::_ctty): Declare new function.
(myctty): Declare new macro.
(__ctty): Declare new macro.
* pinfo.cc (_pinfo::_ctty): Define new function.
(_pinfo::set_ctty): Use manage_console_count() rather than manipulating count
directly.
* signal.cc (kill_pgrp): Use myctty() and __ctty() macros rather than raw ctty
#.
* syscalls.cc (setsid): Ditto. Use manage_console_count() rather than
manipulating count directly.
cygthread to handle extra argument, throughout.
* cygthread.h (cygthread::callproc): Declare new method.
(cygthread::cygthread): Add optional length argument to allow copying arguments
to executing thread.
* cygthread.cc (cygthread::callproc): Define new method.
(cygthread::stub): Use callfunc to invoke thread func to allow potentially
allocating stack memory which will be returned.
(cygthread::simplestub): Ditto.
(cygthread::cygthread): Accept arglen argument. Reset ev here prior to
activating thread. Wait for ev after activating thread if we're copying
contents to the thread. Wait until the end before setting h, to allow thread
synchronization.
(cygthread::release): Don't reset ev here. Rely on that happening the next
time the thread is activated.
* pinfo.h (commune_process): Rename declaration from _pinfo::commune_process.
* pinfo.cc (commune_process): Ditto for definition. Modify slightly to allow
running as a separate cygthread.
* sigproc.cc (child_info::sync): Always wait for both subproc_ready and any
hProcess if we have a cygwin parent.
(talktome): Change argument to be a pointer to siginfo_t. Contiguously
allocate whole siginfo_t structure + any needed extra for eventual passing to
commune_process thread.
(wait_sig): Accommodate change in talktome argument.
* pipe.cc (fhandler_pipe::fixup_after_exec): Remove debugging.
* dtable.h (class dtable): Add class process_lock as a friend.
* dcrt0.cc (get_exit_lock): Delete.
(do_exit): Use process_lock class instead of get_exit_lock.
* exceptions.cc (signal_exit): Ditto.
* pinfo.cc (pinfo::exit): Ditto.
(_pinfo::commune_process): Set process lock around this whole function.
(_pinfo::commune_request): Use process_lock rather than myself.lock.
* pinfo.h (pinfo::_lock): Delete.
(pinfo::initialize_lock): Delete.
(pinfo::lock): Delete.
(pinfo::unlock): Delete.
* winsup.h (get_exit_lock): Delete declaration.
instead.
(get_exit_lock): New function. Grabs the lock and sets initial exit_state.
* exceptions.cc (try_to_debug): Use low_priority_sleep.
(sigpacket::process): Avoid handler if this is an exec stub.
(signal_exit): Use get_exit_lock rather than manipulating the exit_lock
critical section directly.
* pinfo.cc (pinfo::exit): Ditto.
* winsup.h (get_exit_lock): Declare.
(exit_lock): Delete declaration.
commune_send to commune_request throughout.
* pinfo.h (PICOM_EXTRASTR): New flag.
(PICOM_FIFO): Define with new flag.
(_pinfo::hello_pid): Delete.
(_pinfo::tothem): Delete.
(_pinfo::fromthem): Delete.
(_pinfo::commune_process): Rename from commune_recv. Add a siginfo_t argument
to declaration.
(_pinfo::commune_request): Rename from commune_send. Change DWORD to
__uint32_t in declaration.
* pinfo.cc (_pinfo::commune_process): Rename from commune_recv. Add siginfo_t
argument. Use information from argument rather than reading from another pipe.
Synchronize with other process's commune event.
(_pinfo::commune_request): Rename from commune_send. Change DWORD to __uint32
in argument. Fill out information in new siginfo_t element and rely on
extended operation of sig_send rather than trying to deal with synchronization
issues here. Use process handle and read pipe information filled out by
sig_send to gather information from the other process.
* sigproc.cc (sig_send): Take special action if "communing" to ensure
synchronization with the other process and to return information about the
other process to the caller.
(talktome): Accept a siginfo_t and handle arguments. Read additional
information from the signal pipe when _si_commune._si_code has the
PICOM_EXTRASTR flag set.
(wait_sig): Pass the transmitted siginfo_t struct and the pipe handle to
talktome. Close pipe read handle as soon as possible after we detect that
we're exiting.
eof_detected status flag. Delete is_eom and is_eof methods.
Move drive_size, bytes_per_sector, eom_detected status flag, as well
as the methods read_file, write_file, raw_read and raw_write to ...
(class fhandler_dev_floppy): ... here. Remove is_eom and is_eof
methods. Add dup method.
* fhandler_floppy.cc (IS_EOM): New macro.
(fhandler_dev_floppy::is_eom): Remove.
(fhandler_dev_floppy::is_eof): Remove.
(fhandler_dev_floppy::fhandler_dev_floppy): Initialize status flags.
(fhandler_dev_floppy::get_drive_info): Only call EX functions on
systems supporting them and stop suffering strange delays.
(fhandler_dev_floppy::read_file): Move here, drop setting
current_position.
(fhandler_dev_floppy::write_file): Move here, drop setting
current_position.
(fhandler_dev_floppy::open): Rearrange comment.
(fhandler_dev_floppy::dup): New method.
(fhandler_dev_floppy::get_current_position): New inline method. Use
instead of former current_position were appropriate.
(fhandler_dev_floppy::raw_read): Move here. Drop EOF handling.
(fhandler_dev_floppy::raw_write): Move here. Drop EOF handling.
(fhandler_dev_floppy::lseek): Remove useless conditions. Convert
sector_aligned_offset to LARGE_INTEGER to improve SetFilePointer call.
(fhandler_dev_floppy::ioctl): Move blocksize check in RDSETBLK case
to here.
* fhandler_raw.cc (fhandler_dev_raw::is_eom): Remove.
(fhandler_dev_raw::is_eof): Remove.
(fhandler_dev_raw::write_file): Remove.
(fhandler_dev_raw::read_file): Remove.
(fhandler_dev_raw::raw_read): Remove.
(fhandler_dev_raw::raw_write): Remove.
(fhandler_dev_raw::dup): Drop copying removed members.
(fhandler_dev_raw::ioctl): Drop blocksize testing.
* wincap.h: Implement has_disk_ex_ioctls throughout.
* wincap.cc: Ditto.
(wincap_vista): Preliminary wincaps for Windows Vista/Longhorn.
(wincapc::init): Add Vista/Longhorn handling.
* exceptions.cc (sigpacket::process): Eliminate return after call to reinstated
noreturn function.
(signal_exit): Allow function to exit when a captive process has been
terminated.
* pinfo.cc (pinfo::exit): Enter exit_lock here. Once again exit here under
control of exit_lock.
* sigproc.cc (sig_send): Don't wait for completion if process is exiting.
Remove special __SIGEXIT accommodations.
(wait_sig): Just exit the thread when a __SIGEXIT has been detected. Don't
exit the process.
* cygtls.h (struct _cygtls::thread_handle): New field.
* dcrt0.cc (exit_lock): Remove declaration.
* winsup.h (exit_lock): Add declaration.
* exceptions.cc (sigpacket::process): Properly return after signal_exit.
* pinfo.cc (pinfo::exit): Only exit the process if _my_tls.thread_handle has
not been filled out -- which should be an impossible event.
* sigproc.cc (sigproc_terminate): Fillout _my_tls.thread_handle to provide
something for wait_sig to wait for. Use the siginfo_t version of sig_send and
fill out the tls argument with _my_tls.
(wait_sig): Wait for the thread specified in pack.tls or (for now) complain
bitterly if it doesn't exit.
pinfo::exit.
* pinfo.cc (pinfo::exit): Move sigproc_terminate later so that signals can be
processed while waiting for hExeced child.
(pinfo::maybe_set_exit_code_from_windows): Set exit code from sigExeced if it
is non-zero. Set exit_state to ES_EXEC_EXIT prior to waiting for captive
process exit code.
* exceptions.cc (sigExeced): New global variable.
(signal_exit): Remove noreturn attribute from declaration.
(signal_exit): Just terminate captive process and return if hExeced on the
theory that the exit will be subsequently handled in the main thread.
* sigproc.cc (sigproc_terminate): Eliminate test for ES_SIGPROCTERMINATE and
use ES_FINAL instead.
(sig_send): Use no_signals_available instead of duplicate test.
* winsup.h (ES_EXEC_EXIT): New enum.
(ES_SIGPROCTERMINATE): Delete.
(handle_exceptions): Use _sig_tls rather than sigtid to determine if this is
the signal thread.
(set_signal_mask): Ditto for conditionalized CGF code.
* pinfo.cc (pinfo::exit): Exit the thread if we forcefully terminated the main
thread
* sigproc.cc (sigtid): Delete.
(_sig_tls): Define.
(sig_clear): Use _sig_tls rather than sigtid to determine if this is the signal
thread.
(sig_dispatch_pending): Ditto.
(wait_sig): Set _sig_tls here.
* dcrt0.cc (do_exit): Move sigproc_terminate call later since signal handling
was still needed for subsequent stuff. Call sigproc_terminate with new
exit_state value.
* pinfo.cc (pinfo::exit): Call sigproc_terminate with new exit_state value.
* sigproc.cc (proc_terminate): Remove unnecessary (void) parameter.
(sigproc_terminate): Ditto. Add new argument to accept exit state to be set.
(wait_sig): Reorganize __SIGEXIT handling. Add more debugging output.
* winsup.h (sigproc_terminate): Declare with new exit_state argument.
(exit_states): Reorganize to reflect new exit ordering of sigproc_terminate.
appropriately.
* pinfo.cc (pinfo::exit): Always call sigproc_terminate here. Rely on
sigproc_terminate to signal signal thread to handle eventual process exit.
* sigproc.cc (no_signals_available): Change criteria for determining if this
process can handle signals to itself.
(my_sendsig): New variable. Copy of my sendsig handle.
(proc_can_be_signalled): Don't send signals if exit code is set.
(sigproc_terminate): Use and set exit_state appropriately to determine when to
do anything. Send __SIGEXIT to self to control process exit.
(sig_send): Use my_sendsig for sending signals. Don't call
proc_can_be_signalled for myself since the criteria is now different for
sending signals to myself.
(wait_sig): Copy myself->sendsig to my_sendsig for future use. Exit signal
loop when __SIGEXIT is received. Wait for main thread to exit and use its exit
status to actually exit process.
* sigproc.h (__SIGEXIT): New enum.
* dcrt0.cc (alloc_stack): Eliminate superfluous "return;".
* debug.cc (add_handle): Ditto.
* devices.in (device::parse): Ditto.
* dtable.cc (dtable::vfork_parent_restore): Ditto.
(dtable::vfork_child_fixup): Ditto.
* environ.cc (parse_options): Ditto.
* errno.cc (seterrno_from_win_error): Ditto.
* exceptions.cc (sig_handle_tty_stop): Ditto.
(set_signal_mask): Ditto.
* fhandler.cc (fhandler_base::read): Ditto.
(fhandler_base::operator delete): Ditto.
(fhandler_base::seekdir): Ditto.
(fhandler_base::rewinddir): Ditto.
* fhandler_console.cc (fhandler_console::read): Ditto.
(fhandler_console::fixup_after_exec): Ditto.
* sigproc.cc (sigproc_init): Ditto.
(sigproc_terminate): Ditto.
* devices.cc: Regenerate.
* fork.cc (fork_parent): Don't issue errors if "somebody" has set the
PID_EXITED flag on a child. Don't close process handle if it has potentially
already been closed.
* pinfo.cc (winpids::add): Eliminate PID_ALLPIDS handling which was obsoleted
by previous changes.
* spawn.cc (av::fixup): Do win16 detection for .com files. Make sure that
buffer has been unmapped in all cases.
* fhandler_proc.cc: Use cygheap rather than user heap for allocation of filebuf
throughout.
* fhandler_registry.cc: Ditto.
* fhandler_virtual.cc: Ditto.
* fhandler_process.cc: Ditto.
(get_mem_values): Use malloc/realloc/free rather than new.
* pinfo.cc (_pinfo::commune_send): Allocate on cygwin heap rather than user
heap. Avoid calling ReadFile when correct number of characters have been read
or suffer buffer corruption.
(_pinfo::fd): Allocate on cygwin heap rather than user heap.
(_pinfo::fds): Ditto.
(_pinfo::root): Ditto.
(_pinfo::cwd): Ditto.
(_pinfo::cmdline): Ditto.
* devices.h (FH_DEV): New define.
* devices.in: Detect lone /dev.
* devices.cc: Regenerate.
* path.cc (path_conv::check): Treat FH_DEV as a special case.
linux.
* include/cygwin/types.h: Include endian.h.
* include/sys/dirent.h: Define DT_* types and conversion macros.
* pinfo.cc (pinfo::init): Remove special handling for PID_ALLPIDS and execed
code, even though it probably still isn't quite right.
allocate dynamically.
(pinfo::set_acl): Replace sa_buf by dynamically allocated acl_buf.
* sec_acl.cc (setacl): Allocate acl dynamically.
* sec_helper.cc (sec_acl): Add test for alignment of acl when
DEBUGGING is defined.
(__sec_user): Same for sa_buf.
* security.cc (verify_token): Define sd_buf as PSECURITY_DESCRIPTOR
and allocate dynamically.
(alloc_sd): Allocate acl dynamically.
security.h (sec_user_nih): Change first parameter to
SECURITY_ATTRIBUTES *.
(sec_user): Ditto.
* sigproc.cc (wait_sig): Define sa_buf as PSECURITY_ATTRIBUTES and
allocate dynamically.
* syscalls.cc (seteuid32): Define dacl_buf as PACL and allocate
dynamically.
* uinfo.cc (cygheap_user::init): Define sa_buf as PSECURITY_ATTRIBUTES
and allocate dynamically.
* winbase.h (ilockincr): Mark first argument of inline assembly as
earlyclobber.
(ilockdecr): Ditto.
collision with large data areas.
* fhandler_console.cc (fhandler_console::get_tty_stuff): Accommodate changes to
open_shared arguments.
* fhandler_tape.cc (mtinfo_init): Ditto.
* pinfo.cc (pinfo::init): Use open_shared rather than win32 mmap calls.
* shared.cc (user_shared_initialize): Ditto.
(memory_init): Ditto.
(open_shared): Change to allow use a smore general mmap handler.
* shared_info.h (shared_locations): Add SH_JUSTCREATE, SH_JUSTOPEN.
(open_shared): Change declaration to match new usage.
* autoload.cc (LoadDLLfuncEx2): Define in terms of LoadDLLfuncEx3.
(LoadDLLfuncEx3): New macro.
* fhandler.h (fhandler_pipe::create_selectable): Declare.
(fhandler_fifo::close_one_end): Declare.
* fhandler_fifo.cc (fhandler_fifo::close_one_end): Define.
(fhandler_fifo::open_not_mine): Use close_one_end to close appropriate end of
pipe.
* pinfo.cc (_pinfo::commune_recv): Ditto.
* pipe.cc (fhandler_pipe::create_selectable): Rename from
create_selectable_pipe. Reorganize.
(fhandler_pipe::create): Use create_selectable.
* sync.h (locker): New, currently unused class.
(muto::init): Eliminate.
* sync.cc (muto::init): Ditto.
(muto::init): Eliminate critical section lock and instead use name as a guard
to prevent against multiple attempts to initialize the same muto.
* pinfo.cc (pinfo::init): Set myself procinfo when not execing and pid matches
windows pid or cygwin pid.
* pinfo.cc (_pinfo::set_ctty): to here.
* fhandler_mem.cc (fhandler_dev_mem::fstat): Don't fill out structure if this
is an on-disk device rather than an "auto" device.
* fhandler_raw.cc (fhandler_dev_raw::fstat): Ditto.
* path.cc (normalize_posix_path): Don't treat a standalone '//' as introducing
a UNC path.
(normalize_win32_path): Ditto.
* pinfo.h (_pinfo::exists): Declare "new" function.
(_pinfo::kill): Ditto.
* fhandler_termios.cc (tty_min::kill_pgrp): Use _pinfo::exists rather than
proc_exists.
* pinfo.cc (pinfo::init): Ditto. Don't do a low_priority_sleep(0) when looping
to find exec'ed procinfo.
(pinfo::release): Be more careful about unmapping and closing.
* signal.cc (_pinfo::kill): Rename from kill_worker. Accommodate entry into
_pinfo class.
(kill0): Use _pinfo::kill rather than kill_worker.
(kill_pgrp): Ditto. Use _pinfo::exists rather than proc_exists.
* sigproc.cc (_pinfo::exists): Rename from proc_exists.
(pid_exists): Use _pinfo::exists rather than proc_exists.
(remove_proc): Ditto.
* sigproc.h (proc_exists): Delete declaration.
(cygthread::terminate_thread): Eliminat racy code which reset ev and
thread_sync. Remove a few nonsensical inuse checks. Exit at the bottom.
(cygthread::detach): Rewrite to again try to ensure that we don't say we're
signalled when we are not signalled.
* fhandler.cc (fhandler_base::raw_read): Revert to signalling read success
quickly.
* pipe.cc (fhandler_pipe::close): Use base method to close handle.
* sigproc.h (WAIT_SIG_PRIORITY): Just trundle along at normal priority to allow
the pipe thread to do its thing if possible.
* pinfo.h (pinfo::zap_cwd): Declare new function.
(pinfo::zap_cwd): Move 'cd out of the way code' here.
(pinfo::exit): Use it here.
* spawn.cc (spawn_guts): And here.
"device:" entry.
* fhandler.h (fhandler_socket::open): New method.
(fhandler_pipe::open): New method.
* fhandler_proc.cc (fhandler_proc::exists): Return -2 in case of
/proc/self.
* fhandler_process.cc (fhandler_process::exists): Return -2 in
case of symlinks, -3 for pipes and -4 for sockets.
(fhandler_process::fstat): Handle pipes and sockets.
(fhandler_process::open): Handle opening /proc/<pid>/fd.
(fhandler_process::fill_filebuf): Generate empty names for
non exisiting file descriptors.
* fhandler_socket.cc (fhandler_socket::get_proc_fd_name): Always
generate "socket:[number]" strings as on Linux.
(fhandler_socket::open): New method.
(fhandler_socket::fstat): Always return socket type.
* path.cc (symlink_info::set): Remove unused second parameter.
(path_conv::check): Handle pipes and sockets in /proc.
Set correct device type for AF_LOCAL sockets.
* pinfo.cc (_pinfo::commune_recv): Generate empty names for
non exisiting file descriptors.
(_pinfo::fd): Ditto.
* pipe.cc (fhandler_pipe::open): New method.
fhandlers.
* dtable.h (class dtable): Add cygheap_fdenum as friend class.
* fhandler.h (fhandler_base::get_proc_fd_name): New virtual method
to return a name for /proc/<pid>/fd.
(fhandler_socket::get_proc_fd_name): Ditto.
(fhandler_pipe::get_proc_fd_name): Ditto.
(fhandler_virtual::opendir): Make virtual method.
(fhandler_process::opendir): New method.
* fhandler.cc (fhandler_base::get_proc_fd_name): New method.
* fhandler_process.cc: Include ctype.h.
(PROCESS_FD): Define.
(process_listing): Add "fd".
(fhandler_process::exists): Fix comment. Return 1 in case of "fd"
directory. Handle files below "fd".
(fhandler_process::fstat): Drop "self" handling. Set correct link
count for directories.
(fhandler_process::opendir): New method to handle "fd" directory.
(fhandler_process::readdir): Add "fd" handling.
(fhandler_process::open): Drop "self" handling.
(fhandler_process::fill_filebuf): Ditto. Add "fd" handling. Fix
"maps" output string.
* fhandler_registry.cc (fhandler_registry::fstat): Set correct link
count for directories.
* fhandler_socket.cc (fhandler_socket::get_proc_fd_name): New method.
* path.cc (symlink_info::set): Fix thinko.
* pinfo.cc (_pinfo::commune_recv): Rename pathbuf to path throughout.
Drop local path variable in PICOM_FIFO case. Fix debug output.
Close handles as early as possible. Add PICOM_FDS and PICOM_FD
handling.
(_pinfo::commune_send): Add PICOM_FDS and PICOM_FD handling.
(_pinfo::fd): New method.
(_pinfo::fds): New method.
* pinfo.h (enum picom): Add PICOM_FDS and PICOM_FD.
(_pinfo::fd): Declare.
(_pinfo::fds): Declare.
* pipe.cc (fhandler_pipe::get_proc_fd_name): New method.
throughout.
* pinfo.cc (set_myself): Pass INVALID_HANDLE_POINTER if h is NULL.
(pinfo::init): Make third parameter non-optional. Eliminate use of PID_EXECED
as an argument. Put setting of handle back inside loop but reorganize to try
to open it only when necessary.
* fork.cc (fork_parent): Copy parent's nice value into child.
* spawn.cc (spawn_guts): Ditto.
* miscfuncs.cc (winprio_to_nice): New function.
(nice_to_winprio): Ditto.
* pinfo.cc (pinfo_init): If parent is not a Cygwin process, set
default nice value according to current Win32 priority class.
* pinfo.h (class _pinfo): Add nice member.
* syscalls.cc (setpriority): New function, only implementing
PRIO_PROCESS for now.
(getpriority): Ditto.
(nice): Just call setpriority.
* wincap.h (wincaps::has_extended_priority_class): New element.
* wincap.cc: Implement above element throughout.
* winsup.h: Add prototypes for winprio_to_nice and nice_to_winprio.
* include/limits.h (NZERO): New define.
* include/cygwin/types.h (id_t): New datatype.
* include/cygwin/version.h: Bump API minor version.
* include/sys/resource.h: Add PRIO_XXX defines and prototypes for
getpriority and setpriority.
loop since trying multiple times to call CreateFileMapping doesn't make much
sense. Try to structure the loop a little better so that exiting with a break
does the right thing.
(pinfo::release): Release shared memory area if it exists and close handle if
it exists.
has exited before getting an error code.
(pinfo::exit): "cd" to innocuous location before exiting to make sure that
process does not keep the current working directory busy while it is in the
process of really exiting.
* pinfo.cc (pinfo::exit): Use renamed function.
(proc_waiter): Ditto. Make a copy of input argument to avoid problems when
procs array is shuffled. Flag when copy is made so that remove_proc knows when
it is safe to reshuffle.
* sigproc.cc (proc_terminate): Don't flag process_state as PID_EXITED.
(remove_proc): Wait for waiter to finish copying pinfo element before moving it
(an actual wait should be an extremely rare event).
* include/sys/cygwin.h: Remove PID_ZOMBIE.
* pinfo.h: Rename EXITCODE_* defines.
(pinfo::set_exit_state): Remove parameter.
* pinfo.cc (set_exit_state): Remove parameter. Reverse sense of test so that
exitcode is checked for having been set rather than not having been set. Set
flag when exitcode has been established. Don't set PID_STATE here.
(pinfo::init): Remove exitcode initialization.
(pinfo::exit): Reflect change in EXITCODE_* naming. Set flag when exitcode has
been established. Reflect change in arguments to set_process_state.
(proc_waiter): Reflect change in arguments to set_process_state. Set
process_state here and only here.
* fhandler_process.cc (fhandler_process::fill_filebuf): Reflect removal of
PID_ZOMBIE define.
(format_process_stat): Ditto.
(format_process_status): Ditto.
* sigproc.cc (pid_exists): Ditto.
(stopped_or_terminated): Ditto. Make sure that only low-order 16 bits of
exitcode are used.
* spawn.cc (spawn_guts): Reflect change in EXITCODE_* naming.
* fhandler.h (select_record::thread_errno): Save any encountered errno here.
(select_record::set_select_errno): New function.
(select_record::saw_error): New function.
(select_record::select_record): Initialize thread_errno to zero.
* select.cc (set_handle_or_return_if_not_open): Set thread_errno on failure.
(select_stuff::wait): Record errno for later resurrection in calling thread.
(peek_serial): Ditto.
(pinfo::exit): Move here from _pinfo::exit.
* sigproc.cc (child_info::sync): Use new function to set exitcode and
process_state.
* pinfo.cc (_pinfo::exit): Ditto.
(proc_waiter): Ditto.
(_pinfo::set_exit_state): Define new function.
(_pinfo::dup_proc_pipe): Close handle when there is no parent process around to
care about the exit value.
* dcrt0.cc (dll_crt0_0): Move subproc_ready synchronization later to make sure
that myself is still mapped in parent.
(do_exit): Reflect movement to pinfo::exit.
(__api_fatal): Ditto.
* exceptions.cc (signal_exit): Ditto.
* errno.cc (errmap): Map PROC_NOT_FOUND.
* init.cc (dll_entry): Release myself before exiting.
* sigproc.cc (proc_can_be_signalled): Set errno appropriately.
(sig_send): Ditto. Also remove ill-advised test for !myself->sendsig since
this is an indication of a process which is still initializating -- it is not
an error.
(child_info::sync): Don't set exitcode here. Assume that will happen in
proc_waiter, if necessary.
* spawn.cc (spawn_guts): Delay "wait_for_myself" logic until later. Don't wait
at all if the process has already exited. Reflect movement to pinfo::exit.
(cygthread::cygthread): Ditto.
(cygthread::terminate_thread): Ditto. Move inuse test earlier or suffer
infinite loop.
* pinfo.cc (_pinfo::dup_proc_pipe): Close handle if DuplicateHandle fails and
process no longer exists.
* spawn.cc (spawn_guts): Create process in suspended state if OS demands it.
* wincap.cc: Add "start_proc_suspended" throughout.
* wincap.h (wincaps): Ditto.
(wincapc): Ditto.
* pinfo.cc (pinfo::init): Initialize exitcode to unset state rather than
SIGTERM.
(proc_waiter): Detect if exit code is unset and use status from
GetExitCodeProcess.
* sigproc.cc (child_info::sync): Remove exit code detection here since
proc_waiter now (again) detects it.
disk" device or fifo.
(fhandler_base::fchown): Ditto for changing ownership.
* fhandler_disk_file.cc (fhandler_base::fstat_helper): Accommodate device files
on ntfs partitions.
* path.cc (path_conv::check): Use isfs function to figure out if a path exists
on a filesystem to make sure that device files are caught.
(child_info::parent_wr_proc_pipe): Eliminate.
* pinfo.h (_pinfo::alert_parent): Move here from pinfo class.
(_pinfo::dup_proc_pipe): New method.
(_pinfo::sync_proc_pipe): Ditto.
* exceptions.cc (sig_handle_tty_stop): Reflect move of alert_parent.
* init.cc (dll_entry): Exit with status one if main process called ExitProcess.
* pinfo.cc (set_myself): Remove handling of parent_wr_proc_pipe.
(_pinfo::exit): Reflect move of alert_parent. Set procinfo to NULL to flag
that we are exiting normally. Always use exitcode when exiting
(although this could be a little racy).
(pinfo::init): Set default exit to SIGTERM. This will be the exit code
reported if process is terminated.
(_pinfo::dup_proc_pipe): New function.
(pinfo::wait): Duplicate wr_proc_pipe to the right place. Use dup_proc_pipe to
move the pipe to the child.
(_pinfo::sync_proc_pipe): New function.
(_pinfo::alert_parent): Move to _pinfo. Make sure that wr_proc_pipe is ours
before using it.
* sigproc.cc (child_info::child_info): Remove handling of parent_wr_proc_pipe.
* spawn.cc (spawn_guts): Pass our wr_proc_pipe to the child when execing.
Ensure that exit code of cygwin process started from windows is correctly set.
itself here, to avoid a race.
(cygthread::release): Clear more stuff. Add a diagnostic for an internal
error.
* cygthread.h (auto_release): New function.
* pinfo.h (pinfo::remember): Add an argument to denote whether child is
detached.
* fork.cc (fork_parent): Reflect change in arguments to pinfo::remember.
* pinfo.cc (_pinfo::exit): Signal exit more forcibly.
(proc_waiter): Use cygthread::auto_release to signify that cygthread::stub
should release the thread. This should avoid a race.
(pinfo::alert_parent): Don't signify an error when wr_proc_pipe == NULL.
* sigproc.cc (proc_subproc): Add support for PROC_DETACHED_CHILD.
* sigproc.h: Ditto.
* spawn.cc (spawn_guts): Specify whether child is detached or not when calling
pinfo::remember.
MapViewOfFileEx.
* cygthread.cc (cygthread::stub): Previous change to make diagnostic output
more informative was really a bust. Try again. Capture previous name in a new
field in cygthread for diagnostic purposes.
(cygthread::cygthread): Ditto.
(cygthread::release): Add an argument to control whether h should be cleared or
not.
(cygthread::terminate_thread): Use 'inuse' for tests rather than 'h'.
(cygthread): Add some diagnostic fields.
(cygthread::release): Add an argument.
* pinfo.cc (proc_waiter): Accommodate change to cygthread::release.
hProcess handle here since it is used to ensure that a new process isn't
created with the old pid after the old pid exits.
* spawn.cc (spawn_guts): Ditto.
* pinfo.cc (proc_waiter): Don't send any signals if we've execed since this
process doesn't officially exist.
* pinfo.h (pinfo::pid_handle): Eliminate. Just use hProc.
* sigproc.cc (sig_send): Don't send any signals if our sendsig doesn't exist.
That's a sign that we are execing.
(remove_proc): Eliminate pid_handle close.
* pinfo.h (pinfo::wait_thread): New element.
* pinfo.cc (pinfo::wait): Store "handle" to started thread in pinfo.
* sigproc.cc (proc_terminate): Kill any threads waiting for a process pipe.
(proc_subproc): Don't mess with pinfo if it's myself.
* child_info.h (child_info_types): Label enum for _PROC constants.
(child_info::child_info): New constructor.
(child_info::~child_info): New destructor.
(child_info::sync): Declare new function.
(child_info_fork::child_info_fork): New constructor.
(child_info_spawn::child_info_spawn): Remove old constructor.
(child_info_spawn::child_info_spawn): New constructor.
* dcrt0.cc (dll_crt0_0): Use correct sizeof when doing sanity check on passed
in child_info. Signal readiness to parent when not forking (and not spawning).
* fork.cc (sync_with_child): Delete.
(resume_child): Remove extra argument.
(sync_with_parent): Use child_info method to sync with parent.
(fork_child): Don't close fork_info->subproc_ready since that is now handled by
the destructor.
(fork_parent): Remove subproc_ready stuff. Use child_info sync method for
waiting.. Set start time here for child. Rename "forked" to "child".
(fork): Check ch.subproc_ready for validity here.
* pinfo.h (_pinfo::exec_sendsig): Temp storage for exec stub which may be
staying around to handle non-cygwin captive process.
(_pinfo::exec_dwProcessId): Ditto.
(_pinfo::_lock): Renamed from lock.
(_pinfo::lock): New method.
(_pinfo::unlock): Ditto.
(_pinfo::initialize_lock): Ditto.
* pinfo.cc (set_myself): Use initialize_lock method to initialize myself lock.
Set "exec" fields in _pinfo to zero to indicate that we've started
successfully. Set start time here when appropriate.
(_pinfo::commune_send): Use pinfo lock/unlock methods.
(proc_waiter): Remove special case for non-cywin processes. Reinstitute
handling for PID_NOCLDSTOP.
* sigproc.cc (proc_subproc): Set proper EAGAIN errno when process table is
filled.
(sig_send): Use exec_* fields from _pinfo for sending signals if the the _pinfo
sendsig never materializes.
(child_info::child_info): New constructor, renamed from init_child_info.
Zeroes child_info structure and sets appropriate fields in structure based on
chtype.
(child_info::~child_info): New destructor. Closes subproc_ready if it exists.
(child_info_fork::child_info_fork): New constructor.
(child_info_spawn::child_info_spawn): New constructor.
(child_info::ready): New function. Signals parent when child is ready.
(child_info::sync): New function. Wait for child to signal us or process to
die.
(remove_proc): Remove closing of hProcess since this should now be handled
shortly after process creation.
* spawn.cc (spawn_guts): Use child_info_spawn constructor rather than
init_child_info. Save exec_sendsig and exec_dwProcessId in execing _pinfo.
Rely on child_info constructor to properly set parent_wr_proc_pipe in ciresrv.
Revert to previous determination on whether to start a process in suspended
mode. Remove reparenting stuff. Just keep a stub around if starting a
non-cygwin process.
* fork.cc (fork_parent): Set parent_wr_proc.
* pinfo.cc (set_myself): Close child_proc_info->parent_wr_proc if it exists
rather than trying to get value from parent _pinfo.
* pinfo.h (enum parent_aleter): New enum.
(pinfo::alert_parent): Declare as returning a value.
(pinfo::parent_alive): New function.
* pinfo.cc (pinfo::alert_parent): Set wr_proc_pipe to invalid non-NULL value
when parent disappears. Return success of operation.
(proc_waiter): Use __ALERT_* enum for control since these are not really
signals. Implement __ALERT_ALIVE.
* sigproc.cc (my_parent_is_alive): Eliminate.
* sigproc.h (my_parent_is_alive): Ditto for declaration.
(__SIGREPARENT): Eliminate.
* dcrt0.cc (dll_crt0_0): Remove hexec_proc stuff.
* fork.cc (fork_child): Remove call to pinfo_fixup_after_fork.
* pinfo.cc (set_myself): Close and zero pid_handle if set.
(pinfo_fixup_after_fork): Delete.
(proc_waiter): Don't close vchild.hProcess here. Do that when we are remove
the vchild from procs. Save hProcess as pid_handle only on first reparent
operation.
(pinfo::wait): Don't set pid_handle here.
(pinfo::alert_parent): Always try to send signal. If unsuccessful then close
and zero wr_proc_pipe.
* pinfo.h (pinfo::pinfo): Make sure that appropriate parts of the class are
zeroed on construction.
(pinfo::alert_parent): Take char argument.
(pinfo_fixup_after_fork): Delete declaration.
(hexec_proc): Ditto.
* sigproc.cc (remove_proc): Close pid_handle and hProcess if appropriate.
* spawn.cc (spawn_guts): Set cygheap->pid_handle on first exec.
* cygheap.h (init_cygheap::pid_handle): New element.
* pinfo.cc (set_myself): Clear previously existing cygheap->pid_handle when a
new process has been started.
(pinfo::wait): Make sure that a handle to the newly forked/spawned process is
kept around so that the pid will not be reused.
* pinfo.h (_pinfo::pid_handle): Move.
(pinfo::pid_handle): to here.
* spawn.cc (spawn_guts): Create a pid_handle in cygheap prior to spawning to
ensure that the pid does not get reused during the lifetime of the "cygwin
pid".
* pinfo.h (pinfo::alert_parent): New function.
* exceptions.cc (sig_handle_tty_stop): Use alert_parent to send "signals" to
parent.
* fork.cc (fork_parent): Don't close pi.hProcess. Let the waiter thread do
that.
* pinfo.cc (proc_waiter): Detect case where process exits without setting the
exit code and use value from GetExitCodeProcess. Reluctantly implement
__SIGREPARENT.
(pinfo::alert_parent): Define.
* sigproc.h (__SIGREPARENT): New enum.
* spawn.cc (spawn_guts): Send reparent signal to parent on exec. Always create
process in suspended state to avoid races. Remove cygthread.h in favor of
cygtls.h throughout since cygtls now includes cygthread.h. Eliminate
ppid_handle usage throughout.
* child_info.h: Regenerate magic number
(child_info): Remove pppid_handle.
* cygthread.h (cygthread::release): New method. Frees thread without waiting.
* cygthread.cc (cygthread::stub): Set _ctinfo in _mytls to point to information
for executing thread. Don't call SetEvent if thread is no longer in use.
(cygthread::simplestub): Ditto.
* cygtls.h (_cygtls::_ctinfo): New element contains pointer to information
about executing cygthread, if any.
* dcrt0.cc: Remove last vestiges of per_thread stuff.
(dll_crt0_0): Ditto. Remove accommodation for ppid_handle.
(do_exit): Remove obsolete reparenting test.
(_exit): Exit with a more SUSv3-like exit value.
* dtable.cc (dtable::stdio_init): Check for myself->cygstarted rather than
myself->ppid_handle to see if we were started by a cygwin process.
* exceptions.cc (open_stackdumpfile): Ditto.
(handle_exceptions): Ditto.
(ctrl_c_handler): Ditto.
(sig_handle_tty_stop): Ditto. Let parent send signal to itself on STOP.
(sigpacket::process): Comment out vfork test.
(signal_exit): Use more SUSv3-like exit value on signal.
* external.cc (fillout_pinfo): Don't set hProcess.
* fork.cc: Remove VFORK cruft.
(per_thread::set): Delete.
(fork_child): Remove perthread stuff.
(fork_parent): Remove obsolete subproc_init. Accommodate new method for
tracking subprocesses.
* pinfo.cc (set_myself): Accommodate new pinfo/_pinfo layout. Set some things
here that used to be set in wait_sig.
(_pinfo::exit): Set exitcode here. Close process pipe.
(_pinfo::commune_send): Accommodeate new pinfo/_pinfo layout.
(proc_waiter): New function. Waits, in a thread for subprocess to go away.
(pinfo::wait): New function. Initialization for proc_waiter.
* pinfo.h (_pinfo::exitcode): New element.
(_pinfo::cygstarted): Ditto.
(_pinfo::wr_proc_pipe): Ditto.
(_pinfo::ppid_handle): Delete.
(_pinfo::hProcess): Delete.
(_pinfo::lock): Delete.
(pinfo::hProcess): New element.
(pinfo::lock): Ditto.
(pinfo::wait): Declare new function.
(pinfo::preserve): Define new function.
* sigproc.cc: Remove old stuff from wait_subproc thread based method.
(zombies): Remove.
(procs): New.
(my_parent_is_alive): Just check that the parent pid exists.
(mychild): Just use pinfo methods to determine if child is mine.
(proc_subproc): Revamp PROC_ADDCHILD to use pinfo::wait. Remove
PROC_CHILDTERMINATED logic. Use different method to remove processes from list
when SIGCHLD == SIG_IGN.
(proc_terminate): Gut.
(subproc_init): Delete.
(init_child_info): Remove setting of pppid_handle.
(checkstate): Revamp to only scan procs array.
(remove_proc): Rename from remove_zombie. Don't close hProcess or pid_handle.
Don't release memory if it's myself.
(stopped_or_terminated): Change logic to handle new consolidated proc/zombie
array.
(wait_subproc): Delete.
* sigproc.h: Remove obsolete EXIT_* defines.
(subproc_init): Remove declaration.
* spawn.cc (spawn_guts): Remove reparenting stuff. Use standard wait logic to
wait for child if started from a non-cygwin process.
* tlsoffsets.h: Regenerate.
* tty.cc (tty_init): Check for myself->cygstarted rather than
myself->ppid_handle to see if we were started by a cygwin process.
* include/sys/signal.h (external_pinfo::exitcode): Replace hProcess.
* include/sys/wait.h (WCOREDUMP): Define.
* fhandler_tty.cc (fhandler_tty_slave::read): Add debugging output for timeout
case.
* signal.cc (abort): Flag that we are exiting with the ABORT signal.
starting.
* child_info.h (init_child_info): Remove pid argument from declaration.
* cygheap.h (init_cygheap::pid): New element.
* dcrt0.cc (dll_crt0_0): Eliminate handling of now-noexistent cygpid parameter
in child_info struct. Set forkee to 'true' rather than cygpid since the pid
value was never used.
(dll_crt0_1): Ditto.
(_dll_crt0): Ditto.
* fork.cc (fork_child): Don't wait for sigthread. This is handled in the fork
call now.
(fork_parent): Remove obsolete pid argument from init_child_info call. Don't
do anything special with cygpid when DEBUGGING.
(fork): Delay all signals during fork.
(fork_init): Don't do anything special when DEBUGGING.
* pinfo.cc (set_myself): Remove pid parameter. Use new pid field in cygheap.
(pinfo_init): Don't pass pid argument to set_myself.
* sigproc.cc (sig_send): Wait for dwProcessId to be non-zero as well as
sendsig.
(init_child_info): Eliminate handling of pid.
(wait_sig): Implement method to temporarily hold off sending signals.
* sigproc.h (__SIGHOLD): New enum.
(__SIGNOHOLD): Ditto.
* spawn.cc (spawn_guts): Remove obsolete pid argument from init_child_info
call.
* pinfo.cc (pinfo::init): Don't consider MapViewOfFileEx error to be fatal if
exiting.
* pinfo.h (pinfo::init): Eliminate default argument and supply the argument in
the one case that needed it.
* fhandler.h (fhandler_fifo::get_io_handle): New fifo-specific method.
* fhandler_fifo.cc (fhandler_fifo::close): Close output_handle only if it is
open.
(fhandler_fifo::open_not_mine): Reorganize slightly. Don't call _pinfo methods
when the fifo is owned by me or suffer dtable lock_cs deadlock.
(fhandler_fifo::open): Call open_not_mine first, otherwise open myself
(racy).
* pinfo.cc (_pinfo::commune_recv): Duplicate fifo handles here in requesting
processes arena to avoid one potential race (of many).
(_pinfo::commune_send): Move all PICOM_FIFO code under one case statement.
* thread.cc (pthread::init_mainthread) Use existing hMainProc handle rather
than calling GetCurrentProcess.
(sigfe.s): Ensure that sigfe.s will be regenerated if it does not exist.
* dll_init.cc (dll_dllcrt0): Simplify initializing tests.
* exceptions.cc (setup_handler): Detect when stub caller is either spinning or
has acquired the lock after being suspended to avoid windows problems with
suspending a win32 API call.
* cygtls.h (_cygtls::spinning): Declare new element.
* gendef: Remove unused _siglist_index and _siglist declaration.
(_sigfe): Set spinning element when potentially looping, waiting for lock.
(_sigbe): Ditto.
(_cygtls::lock): Ditto.
(_longjmp): Ditto.
* tlsoffsets.h: Regenerate.
* pinfo.cc (_pinfo::exit): Set final exit state here. Call sigproc_terminate
if invoked with 'norecord'. Clear any residual _cygtls stuff.
* winsup.h (exit_states): Define ES_FINAL.
* spawn.cc (spawn_guts): Don't call proc_terminate specifically when execing.
Let _pinfo::exit handle that case.
* sigproc.cc (wait_subproc): Always exit loop early when proc_loop_wait.
* init.cc (munge_threadfunc): Eliminate unused argument.
(dll_entry): Reflect above change in call to munge_threadfunc.
* cygtls.h (_cygtls::call_signal_handler): Rename from call_signal_handler_now.
(_cygtls::push): Make second argument mandatory.
(_cygtls::fixup_after_fork): Declare new function.
(_cygtls::lock): Ditto.
* cygtls.cc (_cygtls::fixup_after_fork): Define new function.
* dcrt0.cc (cygwin_finished_initializing): Define as bool.
(alloc_stack): Use _tlstop rather than arbitrary variable in probably vain
attempt to avoid strange fork problem on CTRL-C.
(dll_crt0_0): Remove obsolete winpids::init call.
* dll_init.cc (dll_dllcrt0): Detect forkee condition as equivalent to
initializing.
* winsup.h (cygwin_finished_initializing): Declare as bool.
* exceptions.cc (handle_exceptions): Rely on cygwin_finished_initializing to
determine how to handle exception during process startup.
(_cygtls::call_signal_handler): Rename from call_signal_handler_now.
(_cygtls::interrupt_now): Fill in second argument to push.
(signal_fixup_after_fork): Eliminate.
(setup_handler): Initialize locked to avoid potential inappropriate unlock.
Resume thread if it has acquired the stack lock.
(ctrl_c_handler): Just exit if ctrl-c is hit before cygiwn has finished
initializing.
* fork.cc (sync_with_child): Don't call abort since it can cause exit
deadlocks.
(sync_with_child): Change debugging output slightly.
(fork_child): Set cygwin_finished_initializing here. Call _cygtls fork fixup
and explicitly call sigproc_init.
(fork_parent): Release malloc lock on fork failure.
(vfork): Call signal handler via _my_tls.
* sigproc.cc (sig_send): Ditto.
* syscalls.cc (readv): Ditto.
* termios.cc (tcsetattr): Ditto.
* wait.cc (wait4): Ditto.
* signal.cc (nanosleep): Ditto.
(abort): Ditto.
(kill_pgrp): Avoid killing self if exiting.
* sync.cc (muto::acquire): Remove (temporarily?) ill-advised exiting_thread
check.
* gendef (_sigfe): Be more agressive in protecting stack pointer from other
access by signal thread.
(_cygtls::locked): Define new function.
(_sigbe): Ditto.
(_cygtls::pop): Protect edx.
(_cygtls::lock): Use guaranteed method to set eax to 1.
(longjmp): Aggressively protect signal stack.
* miscfuncs.cc (low_priority_sleep): Reduce "sleep time" for secs == 0.
* pinfo.cc (winpids::set): Counterintuitively use malloc's lock to protect
simultaneous access to the pids list since there are pathological conditions
which can cause malloc to call winpid.
(winpids::init): Eliminate.
* pinfo.h (winpids::cs): Eliminate declaration.
* pinfo.h (winpids::init): Eliminate definition.
* fhandler.h (fhandler_base::has_acls): Make pass through for path_conv method.
(fhandler_base::isremote): Ditto.
(fhandler_base::is_fs_special): Ditto.
(fhandler_base::has_attribute): Ditto. Define new function.
(fhandler_base::fhaccess): Declare new function based on access_worker.
(fhandler_base::set_has_acls): Eliminate obsolete function.
(fhandler_base::set_isremote): Ditto.
* fhandler.cc (fhandler_base::fhaccess): Move from syscalls.cc and into
fhandler_base class. Use fhandler methods to access data rather than path_conv
stuff.
(fhandler_base::device_access_denied): Use fhaccess method.
* fhandler_disk_file.cc (fhandler_disk_file::opendir): Ditto.
(fhandler_base::open_fs): Remove calls to obsolete functions.
* fhandler_virtual.cc (fhandler_virtual::open): Ditto.
* winsup.h (access_worker): Remove obsolete access_worker declaration.
*syscalls.cc (access_worker): Move function to fhandler.cc.
(access): Use fhaccess method.
* pinfo.cc (_pinfo::set_ctty): Clarify debugging output.
* sigproc.cc (sig_dispatch_pending): Ditto.
* syscalls.cc (setsid): Perform minor rearrangement.
compiler bug.
* autoload.cc (TryEnterCriticalSection): Remove.
* dcrt0.cc (dll_crt0_0): Delete inappropriate setting of _my_tls.stackptr to
NULL since it has really bad consequences. Make 'si' an automatic variable.
* cygtls.cc (_threadinfo::init_thread): Correct thinko which caused thread list
to be allocated every time.
* cygtls.h (CYGTLS_PADSIZE): Define as const int.
* sync.h: Make multiple inclusion safe.
(muto::next): Eliminate.
(muto::exiting_thread): New variable.
(muto::set_exiting_thread): New function.
(new_muto): Change to use different section for mutos since c++ give
inexplicable warning in some cases otherwise.
(new_muto1): Ditto.
* dcrt0.cc (do_exit): Call muto::set_exiting_thread here.
* sync.cc (muto_start): Eliminate.
(muto::acquire): Always give exiting thread a lock. Never give thread a lock
if exiting.
(muto::release): Ditto for releasing.
* dtable.cc (dtable::init_lock): Unline function and define here.
* dtable.h (lock_cs): Define as a muto since critical sections seem to work
oddly on Windows Me.
(lock): Accommodate switch to muto.
(unlock): Ditto.
* exceptions.cc (setup_handler): Don't worry about acquiring mutos since that
hasn't mattered for a long time.
(signal_exit): Ditto: muto stuff will be handled automatically on exit now.
* Makefile.in (DLL_IMPORTS): Link advapi32 to ensure proper DLL initialization.
* autoload.cc (RegCloseKey): Arbitrarily choose this function as a "seed" to
pull the advapi32 link library in. So, comment out the autoloading.
* cygtls.cc (_threadinfo::init_thread): Just clear CYGTLS_PADSIZE.
(_threadinfo::remove): Add debugging.
(_threadinfo::find_tls): Ditto.
* cygtls.h (_threadinfo::padding): Make zero length (for now?).
* dcrt0.cc (dll_crt0_0): Move more initialization here from dll_crt0_1.
(dll_crt0_1): See above.
* dtable.h (dtable::lock): Remove commented out critical section locking.
* dtable.h (dtable::init_lock): Remove commented out critical section locking.
* dtable.h (dtable::unlock): Remove commented out critical section locking.
* exceptions.cc (interruptible): bool'ize.
* init.cc (threadfunc_fe): Revert to storing threadfunc at stack bottom.
(munge_threadfunc): Ditto. Avoid adding overhead to calibration_thread.
(prime_threads): Don't initialize tls stuff.
(dll_entry): Make minor change to initialization order.
* tlsoffsets.h: Regenerate.
* sigproc.cc (wait_sig): Add sanity check for end of process thread exit.
* select.h: Make minor formatting change.
* Makefile.in: Add still more -fomit-frame-pointer functions.
* dtable.h (dtable::lock): New function.
(dtable::unlock): New function.
(dtable::init_lock): New function.
* cygheap.h (HEAP_TLS): Declare new enum value.
(init_cygheap::threadlist): Declare new array.
(init_cygheap::sthreads): Declare new variable.
(cygheap_fdmanip::~cygheap_fdmanip): Use new dtable lock/unlock functions.
(cygheap_fdnew::cygheap_fdnew): Ditto.
(cygheap_fdget::cygheap_fdget): Ditto.
* dtable.cc (dtable_init): Initialize fdtab critical section.
(dtable::fixup_after_fork): Ditto.
(dtable::fixup_after_exec): Ditto.
(dtable::dup2): Use lock/unlock calls to protect access to fdtab.
(dtable::find_fifo): Ditto.
(dtable::fixup_before_fork): Ditto.
(dtable::fixup_before_exec): Ditto.
(dtable::set_file_pointers_for_exec): Ditto.
(dtable::vfork_child_dup): Ditto.
(dtable::vfork_parent_restore): Ditto.
* syscalls.cc (close_all_files): Ditto.
* sync.h (muto::acquired): Declare new function.
(new_muto1): Declare new macro used to specify name of muto storage.
* sync.cc (muto::acquired): Define new function.
* cygthread.cc (cygthread::stub): Remove signal chain removal call since it is
handled during initialization now.
* cygthread.cc (cygthread::simplestub): Remove signal chain removal call since
it is handled during initialization now.
* cygtls.cc (sentry): New class used for locking. Use throughout.
(_threadinfo::reset_exception): Don't pop stack.
(_threadinfo::find_tls): Move from exceptions.cc.
(_threadinfo::init_thread): Initialize array of threads rather than linked
list. Take second argument indicating thread function for this thread.
(_threadinfo::remove): Search thread array rather than linked list. Use sentry
to lock. Only unlock if we got the lock.
(_threadinfo::find_tls): Ditto for first two.
(handle_threadlist_exception): Handle exceptions when manipulating the thread
list in case of premature thread termination.
(_threadinfo::init_threadlist_exceptions): Ditto.
* cygtls.h (TLS_STACK_SIZE): Decrease size.
(_threadinfo::padding): Add element to avoid overwriting lower part of stack.
(_threadinfo::remove): Add a "wait" argument to control how long we wait for a
lock before removing.
* exceptions.cc (init_exception_handler): Make global. Take argument to
control exception handler being set.
(ctrl_c_handler): Wait forever when removing self from signal chain.
(_threadinfo::find_tls): Move to cygtls.cc.
(sig_handle): Reorganize detection for thread-specific signals.
* heap.cc (heap_init): Rework slightly. Make fatal error more verbose. Remove
malloc initialization since it can't happen during dll attach.
* init.cc (search_for): Move address to search for on stack here.
(threadfunc_ix): Ditto for stack offset. Make shared so that stack walk
potentially only has to be done once when cygwin processes are running.
(threadfunc_fe): Use standard tls to store thread function (may change back
later).
(calibration_thread): New function. Potentially called to find threadfunc_ix.
(munge_threadfunc): Search for "search_for" value on stack. Output warning
when thread func not found on stack. Use standard tls to store thread
function.
(prime_threads): New function. Called to prime thread front end.
(dll_entry): Call dll_crt0_0 here when DLL_PROCESS_ATTACH. Call prime_threads
here. Try to remove thread from signal list here.
* sigproc.cc (wait_sig): Initialize threadlist exception stuff here.
* thread.cc (pthread::exit): Pass argument to signal list remove function.
* thread.h: Remove obsolete *ResourceLock defines.
* tlsoffsets.h: Regenerate.
* winsup.h (spf): Define temporary debug macro to be deleted later.
* dcrt0.cc (dll_crt0_0): New function, called during DLL initialization.
Mainly consists of code pulled from dll_crt0_1.
(dll_crt0_1): See above.
(_dll_crt0): Wait for initial calibration thread to complete, if appropriate.
Move some stuff to dll_crt0_0.
(initialize_main_tls): Accommodate argument change to
_thread_info::init_thread.
* fork.cc (fork_child): Ditto.
(sync_with_child): Fix debug message.
* external.cc (cygwin_internal): Remove special considerations for
uninitialized dll since initialization happens during dll attach now.
* dlfcn.cc (dlopen): Remove obsolete *ResourceLock calls.
(dlclose): Ditto.
* cygheap.h (init_cygheap::close_ctty): Declare new function.
* cygheap.cc (init_cygheap::close_ctty): Define new function.
* syscalls.cc (close_all_files): Use close_ctty.
(setsid): Ditto.
* cygthread.cc (cygthread::stub): Remove exception initialization.
* cygthread.cc (cygthread::stub): Remove exception initialization.
(cygthread::simplestub): Ditto.
* thread.cc (pthread::thread_init_wrapper): Ditto.
* cygtls.cc (_last_thread): Make static.
(_threadinfo::call2): Initialize exception handler here.
(_threadinfo::find_tls): Move here.
* exceptions.cc (_threadinfo::find_tls): Move.
* dcrt0.cc (__api_fatal): Add prefix info to message here rather than including
it in every call to function.
* winsup.h (api_fatal): Accommodate above change.
* debug.cc (add_handle): Don't do anything if cygheap not around.
(mark_closed): Ditto.
* dll_init.cc (dll_list::detach): Fix debug output.
* fork.cc (sync_with_child): Ditto.
(vfork): Improve debug output.
* heap.cc (heap_init): Ditto.
* exceptions.cc (try_to_debug): Clarify message when debugger attaches.
this change throughout.
* dtable.cc (dtable::add_archetype): Use correct count when iterating through
*active* archetypes.
* dtable.cc (dtable::fixup_after_exec): Close handle if close_on_exec and
archetype exists since archetype currently does not set windows close-on-exec
flag (FIXME).
* fhandler_tty.cc (fhandler_tty_slave::open): Change debugging output slightly.
(fhandler_tty_slave::close): Ditto.
(fhandler_tty_slave::fixup_after_fork): Just report on inherited use counts
since since archetype currently does not set windows close-on-exec flag
(FIXME).
* pinfo.cc (_pinfo::set_ctty): Change debugging output slightly.
* cygheap.cc (cygheap_init): Remove open_fhs accommodation and use count
reporting.
* perthread.h (vfork_save::fhctty): New element.
* perthread.h (vfork_save::open_fhs): New element.
* fork.cc (vfork): Muck around with ctty and open_fhs stuff, both of which are
now saved in the vfork_save structure.
(report_tty_counts): New macro. Use throughout for reporting tty use counts.
* dtable.cc (dtable::vfork_child_dup): Add debugging output for usecount
increment. Increment open_fhs if appropriate.
(dtable::vfork_parent_restore): "Close" artificially bumped ctty.
(dtable::vfork_child_fixup): Close ctty since it was bumped prior to vfork.
Save open_fhs around close since the closing of these handles has no effect on
the console.
* fhandler_tty.cc (fhandler_tty_slave::open): Reorganize calls to allow for
easier tracking of usecount modification.
(fhandler_tty_slave::open): Ditto.
(fhandler_tty_master::fixup_after_exec): Ditto.
* fhandler_tty.cc (fhandler_tty_master::init): Fix so that children do not
inherit master tty handles.
(fhandler_tty_master::fixup_after_fork): Remove, since it was never used.
(fhandler_tty_master::fixup_after_exec): Ditto.
* pinfo.cc (_pinfo::set_ctty): Increment open_fhs when ctty is set.
* cygheap.cc (cygheap_init): Ditto.
* syscalls.cc (setsid): *Always* call close on opened ctty since the archetype
is associated with the ctty and it counts as an opened handle.
* tty.cc (tty::common_init): Don't protect input/output mutex since it confuses
subsequent fork/execs when CYGWIN=tty.
calculated mask in debugging output.
* sigproc.h (set_signal_mask): Reflect above change in declaration.
* path.cc (mount_item::build_win32): Take path apart before feeding it to
fnmunge. Throughout, change use of _reent_winsup()-> to _my_tls.locals.
instead. Throughout, remove obsolete MT_SAFE/_CYG_THREAD_FAILSAFE
considerations. Througout, add cygtls.h include.
* Makefile.in (DLL_OFILES): Add cygtls.o. Add some more objects to the
-fomit-frame-pointer list.
* acconfig.h: Remove obsolete settings.
* config.h.in: Ditto.
* bsdlib.cc: Add cygtls.h include.
* configure.in: Remove --enable-extra-threadsafe-checking.
* configure: Regenerate.
* cygtls.h (_local_storage): New struct renamed from _winsup_t (sic).
(_threadinfo:local_clib): Add new field.
(_threadinfo::locals): Ditto.
(_threadinfo::init_thread): Accept second _reent * argument.
(_threadinfo::call): Define as regparm.
(CYGTLS_PADSIZE): Remove unnecessary slop.
(_getreent): Define as a macro.
* thread.h: Remove _CYG_THREAD_FAILSAFE and MT_SAFE stuff.
(_winsup_t): Move to cygtls.h.
(ResourceLocks::ResourceLocks): Eliminate empty constructor.
(MTinterface::reents): Eliminate.
(MTinterface::thread_self_key): Eliminate.
(MTinterface::MTinterface): Eliminate.
* dcrt0.cc: Include stdio.h for _impure_ptr initialization.
(do_global_ctors): Remove run_ctors_p (sic) considerations. Don't call atexit
here.
(__main): Initialize destructors for user here.
(dll_crt0_1): Accept a dummy argument. Don't call init_thread here. Don't set
_impure_ptr here. Call do_global_ctors after more things have been
initialized.
(_dll_crt0): Define zeros buffer as max of needed size of CYGTLS_PADSIZE so
that it can be used for two purposes while minimizing stack usage. Initialize
_impure_ptr specifically, for speed. Call dll_crt0_1 with buffer argument.
(cygwin_dll_init): Call dll_crt0_1 with dummy argument.
* dtable.cc (dtable::find_unused_handle): Remove call to AssertResourceOwner.
* exceptions.cc: Move _threadinfo stuff to new file.
* cygtls.cc: New file.
* gentls_offsets: Accommodate increasing complexity of cygtls.h.
* hires.h (hires_base::~hires_base): Remove.
* init.cc (dll_entry): Remove setting of reents.
* thread.cc: Remove syslog.h include.
(__getreent): Simplify to use _my_tls.
(_reent_winsup): Delete.
(AssertResourceOwner): Delete.
(MTinterface::Init): Remove setting of _clib and _winsup, with all that
entails.
(MTinterface::fixup_after_fork): Ditto.
(pthread::thread_init_wrapper): Ditto. Also remove call to
set_tls_self_pointer.
(pthread::set_tls_self_pointer): Eliminate.
(pthread::get_tls_self_pointer): Just return _my_tls.tid;
(__reent_t::init_clib): Eliminate.
* tlsoffsets.h: Regenerate.
getsigmask.
* fhandler.h (fhandler_base): Make friends with close_all_files.
* pinfo.cc (_pinfo::set_ctty): Add more debugging.
* sigproc.cc (proc_can_be_signalled): Detect state when signal handler thread
is gone in target process as an EPERM situation. Set errno to ESRCH if process
doesn't exist.
(sigproc_terminate): Set sendsig to illegal value when closed.
(sig_send): Rely on proc_can_be_signalled setting the proper errno.
* syscalls.cc (close_all_files): Detect when all ttys are closed prior to
calling close_all_files. The ctty needs to be closed explicitly in this case.
(init_cheap::ctty): Change to pointer.
* dtable.h (dtable::find_archetype): Declare new function.
(dtable::add_archetype): Declare new function.
(dtable::delete_archetype): Declare new function.
(dtable::narchetypes): Declare.
(dtable::farchetypes): Declare.
(dtable::initial_archetype_size): Declare.
(dtable::dtable): Initialize new fields.
(dtable::initial_archetype_size): Declare.
* dtable.cc (dtable::find_archetype): Define new function.
(dtable::add_archetype): Define new function.
(dtable::delete_archetype): Define new function.
(dtable::initial_archetype_size): Define.
* fhandler.h (fhandler_base::archetype): Declare.
(fhandler_base::usecount): Declare.
* fhandler.cc (fhandler_base::fhandler_base): Initialize new fields.
* fhandler_console.cc (fhandler_console::get_tty_stuff): Pass NULL to third
argument of set_ctty.
* fhandler_tty.cc (fhandler_tty_slave::open): Accommodate new archetype method
to create only one instance of a tty.
(fhandler_tty_slave::close): Don't close handles unless archetype usecount is
zero. When that happens, close archetype too.
(fhandler_tty_slave::dup): Just copy archetype. Set use count appropriately.
Set ctty, if appropriate.
(fhandler_tty_common::dup): Remove slave considerations.
(fhandler_tty_common::set_close_on_exec): Remove cygheap->ctty considerations.
* pinfo.cc (_pinfo::set_ctty): Accommodate new archetype methods.
* pinfo.h (_pinfo::set_ctty): Make third argument explicit.
* syscalls.cc (close_all_files): Decrement controlling tty use count before
closing all handles to allow controlling tty to be closed. Remove previous
controlling tty considerations.
throughout.
* tty.cc (tty::common_init): Remove call to SetKernelObjectSecurity and edit
some comments.
* cygheap.h (init_cygheap::ctty): Add new element.
* devices.in (device::parse): Remove special handling for /dev/tty.
* devices.cc: Regenerate.
* dtable.cc (build_fh_pc): Don't reset /dev/tty device. Let the device opener
do that.
* fhandler_termios.cc (tty_min::set_ctty): Redefine to _pinfo class.
* fhandler_tty.cc (fhandler_tty_common::set_close_on_exec): Avoid setting
noninherit flag for ctty.
* tty.h: Move BOOLs to bools.
(tty_min::set_ctty): Redeclare to _pinfo class.
* pinfo.cc (_pinfo::set_ctty): Define new function based on tty_min::set_ctty.
Change first argument from tty number to tty_min class.
* pinfo.h (_pinfo::set_ctty): Declare.
* fhandler_console.cc (fhandler_console::get_tty_stuff): Reflect move of
set_ctty to _pinfo class.
* fhandler_tty.cc (fhandler_tty_slave::open): Treat FH_TTY specially. Use
saved cygheap value if it exists. Otherwise convert to real device and save on
first time open.
(fhandler_tty_common::dup): Potentially set controlling tty if duping a slave
tty.
* syscalls.cc (setsid): Close controlling tty in cygheap.
* tty.cc: Change some BOOLs to bools.
* Makefile.in (DLL_OFILES): Add sigfe.o. Remove reliance on cygwin.def from
cygwin0.dll dependency since dependence on sigfe.o implies that. Generate def
file on the fly using 'gendef'.
* configure.in: Don't auto-generate cygwin.def.
* configure: Regenerate.
* cygwin.din: Add SIGFE stuff where appropriate.
* dcrt0.cc (dll_crt0_1): Initialize cygwin tls early in process startup. Set
_main_tls to address of the main thread's cygwin tls.
* debug.h: Remove now unneeded WFSO and WFMO declarations.
* exceptions.cc (_last_thread): Define.
(set_thread_state_for_signals): New function.
(reset_thread_exception_for_signals): Ditto.
(init_thread_for_signals): Ditto.
(delete_thread_for_signals): Ditto.
(capture_thread_for_signals): Ditto.
(handle_exceptions): Set return address explicitly for exceptions prior to
calling sig_send.
(interrupt_on_return): Eliminate.
(setup_handler): Add preliminary implementation for dealing with
thread-specific signals by querying _main_tls.
(signal_exit): Use cygthread::main_thread_id instead of mainthread.id.
(call_signal_handler_now): For now, just handle the main thread.
* fork.cc (vfork): Save and restore main _my_tls.
* gendef: New file. Generates def file and sigfe.s file.
* gentls_offsets: New file. Generates offsets for perl to use in sigfe.s.
* how-signals-work.txt: Mention that info is obsolete.
* init.cc (dll_entry): Initialize cygwin tls storage here.
* miscfuncs.cc (low_priority_sleep): Make a C function for easier calling from
asm.
* perthread.h (vfork_save::tls): New element.
* signal.cc (nanosleep): Replace previous use of
sigframe.call_signal_handler_now with straight call to call_signal_handler_now.
(abort): Ditto.
* syscalls.cc (readv): Ditto.
* termios.cc (tcsetattr): Ditto.
* wait.cc (wait4): Ditto.
* sigproc.cc (sig_dispatch_pending): Ditto.
(sig_send): Ditto.
* sigproc.h: Declare call_signal_handler_now.
* thread.cc (pthread::thread_init_wrapper): Initialize cygwin tls. Remove
obsolete and unworking signal stuff.
* thread.h (verifyable_object::sigs): Eliminate.
(verifyable_object::sigmask): Eliminate.
(verifyable_object::sigtodo): Eliminate.
(verifyable_object::exit): Make attribute noreturn.
(verifyable_object::thread_init_wrapper): Ditto.
(pthread_null::exit): Ditto.
* winbase.h (__stackbase): Always define.
* winsup.h (low_priority_sleep): Declare as a "C" function.
* include/cygwin/version.h: Bump API version to reflect sigwait export.
* include/sys/queue.h: Protect SLIST_ENTRY from previous declaration.
* signal.cc (sigwait): Implement.
* select.cc (fhandler_base::ready_for_read): Add debugging output.
* devices.h: Define more device pointers via their storage.
* devices.in: Don't parse things like /dev/inet/tcp, as they really have no
meaning.
* devices.cc: Regenerate.
* gendevices: Set proper protection for output file.
* cygtls.h: New file.
* gendef: New file.
* gentls_offsets: New file.
* tlsoffsets.h: New file. Autogenerated.
* config/i386/longjmp.c: Remove. File subsumed by gendef output.
* config/i386/makefrag: Remove obsolete file.
* fhandler.cc: Remove spurious access_worker declaration.
* spawn.cc (spawnve): Make debugging output more accurate.
* cygwin-gperf: Remove.
* devices.cc: Remove.
* pinfo.cc (pinfo::init): Do not give FILE_MAP_WRITE access to Everybody.
* exceptions.cc (sig_handle_tty_stop): Do not create pinfo parent with
PID_MAP_WRITE.
* fhandler_process.cc (fhandler_process::fill_filebuf): Ditto for pinfo p.
* signal.cc (kill_worker): Ditto for pinfo dest.
* devices.gperf: New file.
* devices.shilka: New file.
* cygwin-gperf: New file.
* cygwin-shilka: New file.
* fhandler_fifo.cc: New file.
* fhandler_nodevice.cc : New file. Reorganize headers so that path.h precedes
fhandler.h throughout. Remove device argument and unit arguments from fhandler
constructors throughout. Remove pc arguments to fhandler functions and use
internal pc element instead, throughout. Use dev element in pc throughout.
Use major/minor elements rather than units and device numbers previously in
fhandler class. Use correct methods for fhandler file names rather than
directly accessing file name variables, throughout.
* Makefile.in (DLL_OFILES): Add devices.o, fhandler_fifo.o
* dcrt0.cc (dll_crt0_1): Call device::init.
* devices.h: Renumber devices based on more Linux-like major/minor numbers.
Add more devices. Declare standard device storage.
(device): Declare struct.
* dir.cc (opendir): Use new 'build_fh_name' to construct a fhandler_* type.
* dtable.cc (dtable::get_debugger_info): Ditto.
(cygwin_attach_handle_to_fd): Ditto.
(dtable::release): Remove special FH_SOCKET case in favor of generic
"need_fixup_before" test.
(dtable::init_std_file_from_handle): Use either build_fh_dev or build_fh_name
to build standard fhandler.
(dtable::build_fh_name): Renamed from dtable::build_fhandler_from_name. Move
out of dtable class. Don't accept a path_conv argument. Just build it here
and pass it to:
(build_fh_pc): Renamed from dtable::build_fhandler. Move out of dtable class.
Use intrinsic device type in path_conv to create new fhandler.
(build_fh_dev): Renamed from dtable::build_fhandler. Move out of dtable class.
Simplify arguments to just take new 'device' type and a name. Just return
pointer to fhandler rather than trying to insert into dtable.
(dtable::dup_worker): Accommodate above build_fh name changes.
(dtable::find_fifo): New (currently broken) function.
(handle_to_fn): Use strechr for efficiency.
* dtable.h: Reflect above build_fh name changes and argument differences.
(fhandler_base *&operator []): Return self rather than copy of self.
* fhandler.cc (fhandler_base::operator =): Use pc element to set normalized
path.
(fhandler_base::set_name): Ditto.
(fhandler_base::raw_read): Use method to access name.
(fhandler_base::write): Correctly use get_output_handle rather than get_handle.
(handler_base::device_access_denied): New function.
(fhandler_base::open): Eliminate pc argument and use pc element of
fhandler_base throughout.
(fhandler_base::fstat): Detect if device is based in filesystem and use
fstat_fs to calculate stat, if so.
(fhandler_base::fhandler_base): Eliminate handling of file names and, instead,
just free appropriate component from pc.
(fhandler_base::opendir): Remove path_conv parameter.
* fhandler.h: Remove all device flags.
(fhandler_base::pc): New element.
(fhandler_base::set_name): Change argument to path_conv.
(fhandler_base::error): New function.
(fhandler_base::exists): New function.
(fhandler_base::pc_binmode): New function.
(fhandler_base::dev): New function.
(fhandler_base::open_fs): New function.
(fhandler_base::fstat_fs): New function.
(fhandler_base::fstat_by_name): New function.
(fhandler_base::fstat_by_handle): New function.
(fhandler_base::isfifo): New function.
(fhandler_base::is_slow): New function.
(fhandler_base::is_auto_device): New function.
(fhandler_base::is_fs_special): New function.
(fhandler_base::device_access_denied): New function.
(fhandler_base::operator DWORD&): New operator.
(fhandler_base::get_name): Return normalized path from pc.
(fhandler_base::get_win32_name): Return windows path from pc.
(fhandler_base::isdevice): Renamed from is_device.
(fhandler_base::get_native_name): Return device format.
(fhandler_fifo): New class.
(fhandler_nodevice): New class.
(select_stuff::device_specific): Remove array.
(select_stuff::device_specific_pipe): New class element.
(select_stuff::device_specific_socket): New class element.
(select_stuff::device_specific_serial): New class element.
(select_stuff::select_stuff): Initialize new elements.
* fhandler_disk_file.cc (fhandler_base::fstat_by_handle): Move to base class
from fhandler_disk_file.
(fhandler_base::fstat_by_name): Ditto.
(fhandler_base::fstat_by_name): Ditto.
(fhandler_disk_file::open): Move most functionality into
fhandler_base::open_fs.
(fhandler_base::open_fs): New function.
(fhandler_disk_file::close): Move most functionality into
fhandler_base::close_fs.
(fhandler_base::close_fs): New function.
* fhandler_mem.cc (fhandler_dev_mem::open): Use device name in debugging
output.
* fhandler_socket.cc (fhandler_socket::set_connect_secret): Copy standard
urandom device into appropriate place.
(fhandler_socket::accept): Reflect change in fdsock return value.
* fhandler_tty.cc: See "throughouts" above.
* net.cc: Accommodate fdsock change throughout.
(fdsock): Return success or failure, accept fd argument and device argument.
* path.cc (symlink_info::major): New element.
(symlink_info::minor): New element.
(symlink_info::parse_device): Declare new function.
(fs_info::update): Accommodate changes in path_conv class.
(path_conv::fillin): Ditto.
(path_conv::return_and_clear_normalized_path): Eliminate.
(path_conv::set_normalized_path): New function.
(path_conv::path_conv): Set info in dev element. Use path_conv methods Check
for FH_FS rather than FH_BAD to indicate when to fill in filesystem stuff.
where appropriate rather than direct access. Use set_normalized_path to set
normalized path.
(windows_device_names): Eliminate.
(get_dev): Ditto.
(get_raw_device_number): Ditto.
(get_device_number): Ditto.
(win32_device_name): Call new device name parser to do most of the heavy
lifting.
(mount_info::conv_to_win32_path): Fill in dev field as appropriate.
(symlink_worker): Handle new device files.
(symlink_info::check): Ditto.
(symlink_info::parse_device): Define new function.
* path.h (executable_states): Move here from fhandler.h.
(fs_info): Rename variables to *_storage and create methods for accessing same.
(path_conv): Add dev element, remove devn and unit and adjust inline methods to
accommodate.
(set_normalized_path): Declare new function.
* pinfo.cc (_pinfo::commune_recv): Add broken support for handling fifos.
(_pinfo::commune_send): Ditto.
* pipe.cc (fhandler_pipe::close): check for existence of handle before closing
it.
(handler_pipe::create): Rename from make_pipe. Change arguments to accept
fhandler_pipe array. Accommodate fifos.
(pipe): Rework to deal with fhandler_pipe::create changes.
(_pipe): Ditto.
* select.cc: Use individual device_specific types throughout rather than
indexing with obsolete device number.
(set_bits): Use is_socket call rather than checking device number.
* shared_info.h (CURR_MOUNT_MAGIC): Update.
(conv_to_win32_path): Reflect addition of device argument.
* syscalls.cc (mknod_worker): New function.
(open): Use build_fh_name to build fhandler.
(chown_worker): Detect if this is an 'auto' device rather than an on-filesystem
device and handle appropriately.
(chmod_device): New function.
(chmod): Detect if this is an 'auto' device rather than an on-filesystem device
and handle appropriately. Use chmod_device to set mode of in-filesystem
devices.
(stat_worker): Eliminate path_conv argument. Call build_fh_name to construct
fhandler. Use fh->error() rather than pc->error to detect errors in fhandler
construction.
(access_worker): New function pulled from access. Accommodate in-filesystem
devices.
(access): Use access_worker.
(fpathconf): Detect if this is an 'auto' device rather than an on-filesystem
device and handle appropriately.
(mknod_worker): New function.
(mknod32): New function.
(chroot): Free normalized path -- assuming it was actually cmalloced.
* tty.cc (create_tty_master): Tweak for new device class.
(tty::common_init): Ditto.
* winsup.h (stat_worker): Remove.
(symlink_worker): Declare.
* exceptions.cc (set_process_mask): Just call sig_dispatch_pending and don't
worry about pending_signals since sig_dispatch_pending should always do the
right thing now.
(sig_handle): Reorganize SIGCONT handling to more closely conform to SUSv3.
* pinfo.h: Move __SIG enum to sigproc.h.
(PICOM_FIFO): New enum element.
(_pinfo): Remove 'thread2signal' stuff throughout class.
(_pinfo::commune_send): Make varargs.
(_pinfo::sigtodo): Eliminate.
(_pinfo::thread2signal): Ditto.
* signal.cc (kill_worker): Eliminate call to setthread2signal.
* sigproc.cc (local_sigtodo): Eliminate.
(getlocal_sigtodo): Ditto.
(sigelem): New class.
(pending_signals): New class.
(sigqueue): New variable, start of sigqueue linked list.
(sigcatch_nonmain): Eliminate.
(sigcatch_main): Eliminate.
(sigcatch_nosync): Eliminate.
(sigcomplete_nonmain): Eliminate.
(pending_signals): Eliminate.
(sig_clear): Call signal thread to clear pending signals, unless already in
signal thread.
(sigpending): Call signal thread to get pending signals.
(sig_dispatch_pending): Eliminate use of pending_signals and just check
sigqueue.
(sigproc_terminate): Eliminate all of the obsolete semaphore stuff. Close
signal pipe handle.
(sig_send): Eliminate all of the obsolete semaphore stuff and use pipe to send
signals.
(getevent): Eliminate.
(pending_signals::add): New function.
(pending_signals::del): New function.
(pending_signals::next): New function.
(wait_sig): Eliminate all of the obsolete semaphore stuff. Use pipe to
communicate and maintain a linked list of signals.
* sigproc.h: Move __SIG defines here. Add __SIGPENDING.
(sig_dispatch_pending): Remove "C" specifier.
(sig_handle): Accept a mask argument.
* thread.cc: Remove signal handling considerations throughout.
(winpids::winpids): Rejigger to set pinfo_access.
* pinfo.cc (winpids::add): Try to open shared memory region with supplied
pinfo_access first, then default to readonly.
* fhandler_termios.cc (tty_min::kill_pgrp): When getting list of pids to work
with, suggest opening with PID_MAP_RW.
* signal.cc (kill_pgrp): Ditto.
* sigproc.cc (sig_send): Perform a write check on todo prior to attempting to
increment it. Return EACCES if we can't write to it.
* security.h (__sec_user): Add "access2" argument.
(sec_acl): Add "original" and "access2" arguments.
(sec_user): Add "sid2" and "access2" argument. Remove dependence on
allow_ntsec.
(sec_user_nih): Ditto.
* sec_helper.cc (__sec_user): Add "has_security" test.
Call sec_acl with new arguments, letting it handle original_sid.
(sec_acl): Add "original" and "access2" arguments. Handle original_sid
depending on flag but avoiding duplicates. Use "access2" for sid2.
* pinfo.cc (pinfo::init): Use security attributes created by sec_user
when creating the mapping.
* security.cc (create_token): Adjust arguments in call to sec_acl.
Call sec_user instead of __sec_user.
* syscall.cc (seteuid32): Adjust arguments in call to sec_acl. Remove
now unnecessary test. Remove useless conversions to psid.
* dcrt0.cc (dll_crt0_1): Call cygsid::init before pinfo_init.
* pinfo.cc (pinfo_init): Initialize myself->gid.
(pinfo::init): Create the "access" variable, set it appropriately and use it to
specify the requested access.
* exceptions.cc (sig_handle_tty_stop): Add PID_MAP_RW in pinfo parent.
* signal.cc (kill_worker): Ditto for pinfo dest.
* syscalls.cc (setpgid): Ditto for pinfo p.
(dll_crt0_1): Store argc in __argc_safe, which will theoretically remain
untouched by the user.
* fhandler_console.cc (fhandler_console::read): Silence some compiler warnings.
* fhandler_raw.cc (fhandler_dev_raw::raw_read): Ditto.
* pinfo.cc (_pinfo::commune_recv): Carefully bound argv scan and check for
potentially bad pointers since user could have set argv cell to anythinw.
* cygheap.h (CYGHEAPSIZE): Bump up size.
cygerrno.h.
* include/cygwin/config.h (__DYNAMIC_REENT__): Define.
* include/cygwin/version.h: Bump API minor version.
* cygwin.din: Export __getreent
* cygerrno.h: Include errno.h. Fix places where _impure_ptr is used directly
to store the errno value.
* debug.cc (__set_errno): Ditto.
* errno.cc: Remove _RRENT_ONLY define to get errno.cc compiled.
* signal.cc: Rename _reent_clib to _REENT throughout.
* thread.h (reent_clib): Remove prototype.
* thread.cc (reent_clib): Rename reent_clib to __getreent. Return _impure_ptr
until MTinterface is initialized.
(reent_winsup): Fix a possible SEGV when _r == NULL. Return NULL instead.
* MTinterface::fixup_after_fork: Switch reent back to _impure_ptr to keep
signal handling running when fork is called from a thread other than the
mainthread.
(winpids::init): New declaration.
(winpids::cs): Ditto.
(winpids::winpids): Use set rather than init.
* external.cc (fillout_pinfo): Ditto.
* dcrt0.cc (dll_crt0_1): Call winpids::init.
* pinfo.cc (winpids::set): Renamed from init. Wrap calls in critical section.
(winpids::init): New function.
(winpids::cs): Define.
is supposed to be giving up time slice.
* fhandler_console.cc (fhandler_console::read): Switch button 2/3 output escape
sequences to be consistent with xterm.
* pinfo.h (SIGCOMMUNE): New signal type.
(commune_result): New structure for commune functions.
(picom): New enum for commune functions.
(_pinfo::hello_pid): New. Pid who's communicating with me.
(_pinfo::tothem): New. Handle of communicating pipe.
(_pinfo::fromthem): Ditto.
(_pinfo::commune_recv): Declare.
(_pinfo::commune_send): Declare.
(_pinfo::alive): Declare.
(_pinfo::cmdline): Declare.
(_pinfo::lock): Declare.
* pinfo.cc (set_myself): Initialize new _pinfo lock.
(_pinfo::alive): Define. Determines if process still exists.
(_pinfo::commune_recv): Define. Receive info from another cooperating process.
(_pinfo::commune_send): Define. Send info to another cooperating process.
(_pinfo::cmdline): Define. Determine command line of a given process.
* include/sys/cygwin.h (CW_CMDLINE): Define.
*sigproc.cc (talktome): Communicate with any processes who want to talk to me.
(wait_sig): Honor __SIGCOMMUNE.
* fhandler.cc (fhandler_virtual::fixup_after_exec): Declare.
* fhandler_proc.cc: Use malloc/free/realloc throughout rather than cmalloc
since buffers don't need to be propagated to subprocesses.
* fhandler_registry.cc: Ditto.
* fhandler_virtual.cc: Ditto.
(fhandler_virtual::fixup_after_exec): Define.
* fhandler_process.cc: Ditto for malloc/free/realloc.
(process_listin): Add "cmdline".
(fhandler_process::fill_filebuf): Implement PROCESS_CMDLINE.
* miscfuncs.cc (isalpha_array): New array populated with xor values for alpha
characters to switch from one case to another.
* string.h (cygwin_strcasematch): New asm implementation of case match.
* string.h (cygwin_nstrcasematch): New asm implementation of counted case
match.
(child_info_fork::mount_table): Remove.
(child_info_fork::myself_addr): Remove.
* fork.cc (fork_child): Don't set either of the above.
* dcrt0.cc (dll_crt0_1): Call memory_init as early as possible.
* fhandler_console.cc (console_state): Move to shared_info.h.
(fhandler_console::get_tty_stuff): Reflect open_shared arg change.
* pinfo.cc (myself_addr): Remove definition.
(pinfo::init): Get myself address from open_shared.
* pinfo.h (myself_addr): Remove declaration.
* shared.cc (open_shared): Rework so that known shared memory locations are
protected. Take shared memory type as fifth argument.
(memory_init): Reflect open_shared arg change.
* shared_info.h (shared_locations): New enum.
(console_state): Move here.
(open_shared): Reflect open_shared arg change in declaration.
(child_info_fork::heaptop): Remove obsolete element.
(child_info_fork::heabbase): Ditto.
(child_info_fork::heapptr): Ditto.
(child_info_fork::mount_table): New element.
(child_info_fork::myself_addr): Ditto.
* dcrt0.cc (dll_crt0_1): Set mount_table and myself_addr when forking.
(initial_env): Add newline to "sleeping" message.
* dll_init.cc (reserve_upto): Accommodate cygwin heap when freeing memory.
Make debugging output a little more descriptive.
* fork.cc (fork_parent): Save mount_table and myself_addr.
* pinfo.cc (myself_addr): New variable.
(set_myself): Pass PID_MYSELF flag to init.
(pinfo::Init): Honor PID_MYSELF. Save address where myself shared memory
resides in myself_addr, for fork.
* pinfo.h (myself_addr): Declare.
* shared.cc (memory_init): On fork, use previously saved address for location
of mount table.
* include/sys/cygwin.h (PID_MYSELF): New value.
* dtable.cc (dtable::stdio_init): Don't pass access type to
init_std_file_from_handle. It's always the same.
(dtable::init_std_file_from_handle): Remove access type argument. Assume
read/write.
* dtable.h (dtable::init_std_file_from_handle): Ditto for declaration.
* exceptions.cc (try_to_debug): Don't try to debug if already being debugged.
* fhandler_console.cc (shared_console_info_save): New variable.
(fhandler_console::get_tty_stuff): Save address of shared console stuff for
fork.
Initialize thread_sync event here which is used to Suspend using an event
rather than relying on SuspendThread/ResumeThread.
(cygthread::init): Save handle to runner thread for future termination.
(cygthread::cygthread): Only resume thread when it is actually suspended.
Otherwise signal thread completion event.
(cygthread::terminate): Forcibly terminate runner thread and any helper
threads. Call DisableThreadLibrary calls if execing.
* cygthread.h (cygthread::thread_sync): Declare.
* dcrt0.cc (do_exit): Eliminate calls to obsolete window_terminate and
shared_terminate.
* exceptions.cc (events_terminate): Don't bother closing title_mutex since it
is going away anyway.
* pinfo.cc (_pinfo::exit): Call cygthread::terminate to ensure that threads are
shut down before process exit or otherwise strange races seem to occur.
* shared.cc (shared_terminate): Eliminate.
* shared.h (shared_terminate): Eliminate declaration.
* winsup.h (window_terminate): Eliminate declaration.
* spawn.cc (spawn_guts): Call cygthread::terminate early in process if execing.
Call DisableThreadLibrary calls if execing.
* window.cc (Winmain): Call ExitThread to force exit.
(window_terminate): Eliminate.
* dcrt0.cc (do_exit): Track exit state more closely.
already taken care of that.
* fhandler_console.cc (fhandler_console::open): Initialize handles to NULL.
(fhandler_console::close): Ditto. GNUify non-GNU formatted functions calls
throughout.
* environ.cc (spenv::retrieve): Add debugging statements.
* pinfo.cc (set_myself): Don't call strace.hello if already stracing.
* strace.cc (strace): Move NO_COPY keyword so that it will actually take
effect.
Drop ZwQuerySystemInformation since NtQuerySystemInformation was
already available.
* fhandler_proc.cc (format_proc_uptime): Replace call to
ZwQuerySystemInformation by call to NtQuerySystemInformation.
(format_proc_stat): Ditto.
* fhandler_process.cc (format_process_stat): Replace call to
ZwQueryInformationProcess by call to NtQueryInformationProcess.
(get_process_state): Ditto.
(get_mem_values): Ditto. Replace call to ZwQueryVirtualMemory by
call to NtQueryVirtualMemory.
* ntdll.h: Cleanup. Drop ZwQuerySystemInformation since
NtQuerySystemInformation was already available. Replace declarations
of ZwXXX functions by declarations of NtXXX.
* pinfo.cc (winpids::enumNT): Replace call to ZwQuerySystemInformation
by call to NtQuerySystemInformation.
where appropriate, throughout. Remove unneeded exceptions.h, where
appropriate, throughout. Remove unneeded perprocess.h, where appropriate,
throughout.
required to allow use of some things from user loaded DLL.
(CW_STRACE_ON): Add new feature.
(CW_CYGWIN_PID_TO_WINPID): Ditto.
* pinfo.cc (set_myself): Call "strace.hello" to initiate possible strace
session.
(pinfo::init): Guard against dereferencing uninitialized myself.
* sigproc.cc (wait_sig): Call strace.hello() when __SIGTRACE "signal" received.
* strace.cc (strace::hello): New method.
* wincap.cc (wincapc::init): Avoid initializing if already initialized.
* wincap.h (wincapc::wincapc): New method.
* include/sys/cygwin.h: Add new CW_ enums. Kludge typedefs of {g,u}id_t if
required.
* strace.h (strace::hello): Declare new method.
Force dependencies for files which depend on autogenerated headers to ensure
that they are always built.
* child_info.h (child_info): Add new fields to accommodate new magic number
header stuff.
* dcrt0.cc: Rely on "child_info_magic.h" to ensure that correct child_info
magic numbers are used.
(dll_crt0_1): Temporarily remove _cygwin_testing_magic test.
(_dll_crt0): Do more testing on magic numbers from fork_info structure. Call
"multiple_cygwin_problem" where appropriate.
(multiple_cygwin_problem): Rename from multiple_cygwin_die. Issue a warning or
die, as appropriate based on cygwin version/magic number mismatch.
* pinfo.cc (pinfo::exit): Don't attempt to dereference `this' if it doesn't
exist. This can happen when a fatal error occurs early in process
initialization.
* shared.cc: Rely on "shared_info_magic.h" to accommodate that new magic number
header stuff.
(shared_info::initialize): Use new magic number stuff, for shared region.
(memory_init): Ditto, for mount table.
* shared_info.h: Accomodate new magic number stuff for shared region and mount
table.
* sigproc.cc: Rely on "child_info_magic.h" to accommodate new magic number
header stuff.
(init_child_info): Initialize new fields in child_info) to accomodate magic
numbers.
* winsup.h: Rename multiple_cygwin_die to multiple_cygwin_problem.
* include/cygwin/version.h: Define macros for manipulating version magic.
* cygmagic: New shell script for generating magic numbers.
* fhandler.cc (fhandler_base::close): Show both name and handle in debugging
output.
* fhandler.h (fhandler_base::get_guard): New virtual method.
(fhandler_pipe::get_guard): New method.
(fhandler_socket::ready_for_read): Delete declaration.
(fhandler_pipe::ready_for_read): Ditto.
(fhandler_serial::ready_for_read): Ditto.
(fhandler_console::ready_for_read): Ditto.
(fhandler_tty_common::ready_for_read): Ditto.
(fhandler_windows::ready_for_read): Ditto.
(struct select_record::peek): Declare new method.
* select.cc (MAKEready): Delete.
(peek_pipe): Use get_guard method to retrieve potential guard mutex handle.
(fhandler_base::ready_for_read): Rewrite as generic ready-for-read handler.
Should only be called for "slow" devices.
(fhandler_socket::ready_for_read): Delete definition.
(fhandler_pipe::ready_for_read): Ditto.
(fhandler_serial::ready_for_read): Ditto.
(fhandler_console::ready_for_read): Ditto.
(fhandler_tty_common::ready_for_read): Ditto.
(fhandler_windows::ready_for_read): Ditto.
(fhandler_pipe::select_read): Fill in new peek record in select_record
structure.
(fhandler_console::select_read): Ditto.
(fhandler_tty_common::select_read): Ditto.
(fhandler_serial::select_read): Ditto.
(fhandler_socket::select_read): Ditto.
(fhandler_socket::select_read): Ditto.
(fhandler_tty_slave::ready_for_read): Check for tty not open. Set errnos
appropriately.
* syscalls.cc (_read): Allow ready_for_read to set errno.
* pinfo.cc (pinfo::init): Return spawn/NO_WAIT process as valid if it is
initializing.
* sigproc.cc (getsem): Adjust wait for process to initialize downward to avoid
huge waits.
SNDCTL_DSP_GETBLKSIZE operation. Remove obsolete 'name' arg from fhandler_*
constructors throughout.
* winsup.h (winsock_active): New macro.
(winsock2_active): Ditto.
* autoload.cc (wsock_init): Use new macros to decide if winsock or winsock2 is
loaded.
(nonexist_wsock32): Dummy function to force winsock load.
(nonexist_ws2_32): Dummy function to force winsock2 load.
* fhandler.h (fhandler_socket::fstat): Declare new method. Currently unused.
* fhandler_socket.cc (fhandler_socket::fixup_before_fork_exec): Check that
winsock2 is active before trying WSADuplicateSocketA.
(fhandler_socket::fixup_after_fork): Add extra check for winsock2_active.
Otherwise use iffy procedures for Windows 95.
(fhandler_socket::fixup_after_exec): Add debugging.
(fhandler_socket::dup): Add debugging.
(fhandler_socket::fstat): New method.
(fhandler_socket::set_close_on_exec): Attempt to perform iffy stuff on Windows
95.
* errno.cc (_sys_nerr): Work around compiler strangeness.
* pinfo.cc (winpids::add): Add extra element at end of allocated array for
setting to NULL.
(winpids::enumNT): Ditto.
(winpids::init): Don't modify pidlist if it hasn't been allocated
(possibly due to malloc problem).
operators to simplify testing for directory and attributes, throughout.
* path.h (path_conv::exists): New method.
(path_conv::has_attribute): Ditto.
(path_conv::isdir): Ditto.
(path_conv::DWORD &): New operator.
(path_conv::int &): Ditto.
* dir.cc (rmdir): Eliminate a goto.
* dtable.cc (dtable::build_fhandler): Accept opt and suffix info for
path_conv.check. Return fh == NULL on path_conv error. Pass unit to set_name
as appropriate.
(dtable::reset_unix_path_name): New method.
* dtable.h (dtable): Declare new method. Reflect arg changes to
build_fhandler.
* fhandler.cc (fhandler_disk_dummy_name): Eliminate.
(fhandler_base::set_name): Expect paths to be NULL. Build unix_path_name from
win32_path_name when it is a device.
(fhandler_base::reset_unix_path_name): New method.
(fhandler_base::raw_read): Report EISDIR when ERROR_INVALID_FUNCTION or
ERROR_INVALID_PARAMETER and reading a directory.
(fhandler_disk_file::fstat): Don't call stat_dev since we should now never be
calling fhandler_disk_file methods with devices.
(fhandler_base::fhandler_base): Clear {unix,win32}_path_name.
(fhandler_base::~fhandler_base): Always free {unix,win32}_path_name.
(fhandler_disk_file::fhandler_disk_file): Remove set_no_free_names kludge.
(fhandler_disk_file::open): Ditto.
* fhandler.h (fhandler_base::no_free_names): Eliminate.
(fhandler_base::set_no_free_names): Ditto.
* fhandler_tty.cc (fhandler_tty_slave::fhandler_tty_slave): Don't set
unix_path_name here.
* path.cc (fchdir): Lock fd table throughout. Use new
dtable::reset_unix_path_name method to reset path.
* syscalls.cc (stat_worker): Reorganize to always call fstat method. Pass
path_conv method to fhandler_*::open.
(chroot): Elminate a goto.
* dcrt0.cc (set_os_type): Set 'iswinnt' appropriately.
* cygheap.cc (init_cheap): Revert to using VirtualAlloc for allocating cygheap.
(cygheap_setup_for_child_cleanup): New function. Standard function to call
after calling CreateProcess to cleanup cygheap info passed to child.
(cygheap_fixup_in_child): Copy cygheap from shared memory into allocated space
under Windows 9x or if can't relocate shared space under NT.
* cygheap.h: Declare new function.
* spawn.cc (spawn_guts): Use cygheap_fixup_in_child.
* fork.cc (fork_parent): Ditto.
* winsup.h: Declare iswinnt.
fhandler.h.
* fhandler.h (fhandler_base::get_inheritance): New method.
* fhandler_socket.cc (fhandler_socket::create_secret_event): Use proper
close-on-exec inheritance when creating.
(fhandler_socket::check_peer_secret_event): Create handle as non-inheritable.
* environ.cc (codepage_init): To here.
* exceptoins.cc (SIG_NONMASKABLE): Remove SIGCONT from consideration since it
is supposed to be maskable.
* signal.cc (sigaction): Ditto.
* sigproc.cc (wait_sig): Ditto.
* winsup.h: Eliminate global declaration of codepage_init.
* dcrt0.cc (dll_crt0_1): Translate command line to OEM if current codepage is
OEM.
* environ.cc: Add new option 'codepage' to CYGWIN environment variable.
* fhandler_clipboard.cc (fhandler_clipboard::read): Read clipboard in OEM mode
if current codepage is OEM.
* fhandler_console.cc (fhandler_console::read): Only translate console input if
current codepage is ANSI.
* fhandler_console.cc (fhandler_console::write_normal): Translate output data
if current codepage is ANSI.
* pinfo.cc (codepage_init): New function. Setup current codepage from CYGWIN
environment variable and set codepage for file APIs.
* security.cc (read_sd): Translate file name to it if current codepage is OEM.
* winsup.h: (sys_wcstombs,sys_mbstowcs): Use current codepage for translations
between multibyte and widechar string and vice versa.
(winpids::enumNT): New method renamed from EnumProcessesNT. Use add method to
add elements to the lists.
(winpids::enum9x): New method renamed from EnumProcesses9x. Use add method to
add elements to the lists.
(winpids::enum_init): Accept 'winpid' parameter to control whether to add all
windows pids to the list.
(winpids::release): New method.
* pinfo.h (winpids): Reflect above changes.
* signal.cc (kill_pgrp): Ditto.
* external.cc (fillout_pinfo): Ditto.
execed process to avoid a race.
* sigproc.cc (wait_subproc): Print more info when a WFSO error occurs.
* automode.c: New file.
* syscalls.cc (close_all_files): Streamline slightly.
* cygheap.cc (ccalloc): Clear *entire* allocated array.
(EnumProcesses9x): Rename from EnumProcessesW95. Change arguments to be more
useful for cygwin.
(winpids::init): Accomodate argument changes.
(enum_init): Ditto.
* pinfo.h (winpids): Make pidlist dynamically extendable by storing it as a
pointer and remembering the size.
* ntdll.h: Add extra definitions needed for EnumProcessesNT. Reformat via
'indent'.
* security.cc (write_sd): Call `set_process_privileges' on the first
call to `write_sd'.
(set_process_privileges): Eliminate adjusting SE_BACKUP_NAME privilege.
* fhandler_console.cc (fhandler_console::tcsetpgrp): Eliminate.
* fork.cc (fork_parent): Avoid returning same pid twice in a row regardless of
OS.
* pinfo.cc (pinfo::init): Rename create argument to flags and treat it as such.
* signal.cc (set_sigcatchers): New function.
(signal): Use set_sigcatchers to increment or decrement sigcatcher tracker.
(sigaction): Ditto. Add debugging output.
* spawn.cc (spawn_guts): Always quote first argv[0] argument when it's a
COMSPEC shell.
finding execed processes twice.
* signal.cc (kill_pgrp): Ditto.
* spawn.cc (spawn_guts): Avoid passing first argument to CreateProcess when
running a windows shell so that CreateProcess will locate the shell.
Reorganize so that correct error is returned when CreateProcess fails.
is not available.
* dcrt0.cc (sigthread::init): Ditto.
(dll_crt0_1): Move set_process_privileges call (temporarily?) to pinfo_init.
(pinfo_init): Only call set_process_privileges when allow_ntsec.
* dcrt0.cc (dll_crt0_1): Call signal_fixup_after_exec where appropriate. Set
myself->uid from parent version. Just use ThreadItem Init method. Close or
store hexec_proc as appropriate.
(_dll_crt0): Store user_data->forkee here so that proper tests can be made
subsequently.
(do_exit): Remove hExeced stuff.
* environ.cc (environ_init): Accept environ count as well as environ pointer.
* environ.h: Reflect above change.
* pinfo.cc (pinfo_init): Ditto. Accept environ count.
(fixup_in_spawned_child): Remove.
* spawn.cc (spawn_guts): Move signal code to dll_crt0_1. Don't suspend execing
process since it is no longer necessary. Store envc.
* exceptions.cc (signal_fixup_after_exec): New function.
(call_handler): Remove hExeced test.
* child_info.h (cygheap_exec_info): Store envc as well as envp.
(child_info_spawn): Store hexec_proc so that it can be closed in child.
* path.cc (normalize_posix_path): Avoid intermediate use of temporary cwd buf.
(normalize_win32_path): Ditto.
(cwdstuff::get_initial): Always set lock.
* sigproc.h: Remove hExeced.
* strace.cc (strace::vsprntf): Modify to accomodate for lack of hExeced.
* thread.cc (MTinterface::Init): Merge Init1 and ClearReent into this method.
(MTinterface::Init1): Eliminate.
(MTinterface::ClearReent): Eliminate.
* thread.h: Reflect above changes.
* include/sys/strace.h (strace): Make microseconds() public. Make various
functions 'regparm', throughout.
* pinfo.h (_pinfo): Inline simple signal manipulation functions. Requires
inclusion of thread.h which was removed from .cc files, where appropriate.
throughout.
* pinfo.cc: Eliminate signal manipulation functions.
(_pinfo::exit): Calculate total rusage for exiting process here.
* cygheap.cc (size2bucket): Eliminate.
(init_buckets): Ditto.
(_cmalloc): Calculate size and bits in a loop rather than going through a
function call.
(_crealloc): Use stored array index to calculate allocated size.
* spawn.cc (spawn_guts): Use _pinfo exit method to exit, calculating cpu usage.
Christopher Faylor
Corinna Vinschen
Joshua Daniel Franklin
Robert Collins
Pierre Humblet