Previsouly, the following commands hangs:
mintty -e timeout 1 dash -c 'yes aaaaaaaaaaaaaaaaaaaaaaaaa | cat'
The mechanism is as follows.
When the child process (timeout) is terminated, mintty seems to stop
reading pty master even if yes or cat still alive.
If the the pipe used to transfer output from pty slave to pty master
is full due to lack of master reader, WriteFile() to the pipe is
blocked. WriteFile() cannot be canceled by cygwin signal, therefore,
pty slave hangs.
This patch avoids hanging by checking pipe space before calling
WriteFile() and prevents writing data more than space.
Addresses: https://cygwin.com/pipermail/cygwin/2024-June/256178.html
Reported-by: jojelino <jojelino@gmail.com>
Signed-off-by: Takashi Yano <takashi.yano@nifty.ne.jp>
If ldd is run against a DLL which links to the Cygwin DLL, ldh will end
up loading the Cygwin DLL dynamically, much like cygcheck or strace.
Addresses: https://cygwin.com/pipermail/cygwin/2024-May/255991.html
Fixes: 60675f1a7e ("Cygwin: decouple shared mem regions from Cygwin DLL")
Reviewed-by: Ken Brown <kbrown@cornell.edu>, Takashi Yano <takashi.yano@nifty.ne.jp>
Signed-off-by: Jeremy Drake <cygwin@jdrake.com>
To avoid race issues, pthread::once() uses pthread_mutex. This caused
the handle leak which was fixed by the commit 2c5433e5da. However,
this fix introduced another race issue, i.e., the mutex may be used
after it is destroyed. This patch fixes the issue. Special thanks to
Bruno Haible for discussing how to fix this.
Addresses: https://cygwin.com/pipermail/cygwin/2024-May/255987.html
Reported-by: Bruno Haible <bruno@clisp.org>
Fixes: 2c5433e5da ("Cygwin: pthread: Fix handle leak in pthread_once.")
Reviewed-by: Ken Brown <kbrown@cornell.edu>
Signed-off-by: Takashi Yano <takashi.yano@nifty.ne.jp>
While commit 0321fb5736 ("Cygwin: glob: convert wchar_t to wint_t")
switched the entire glob mechanism from wchar_t to wint_t, the globify
function calling glob on a DOS command line did not catch up and only
checked for the next character constituting a 16 bit wchar_t. This
broke reading surrogate pairs from incoming DOS command lines if the
string had to go through glob(3).
Check for an entire 32 bit unicode char instead.
Fixes: 0321fb5736 ("Cygwin: glob: convert wchar_t to wint_t")
Reported-by: David Allsopp <david@tarides.com>
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
If FILE_DIRECTORY_FILE is given, FILE_OPEN_NO_RECALL is not allowed,
otherwise NtCreateFile returns STATUS_INVALID_PARAMETER.
Drop FILE_OPEN_NO_RECALL where FILE_DIRECTORY_FILE is specified.
Fixes: f6b56abec1 ("Cygwin: try to avoid recalling offline files")
Reported-by: Bruce Jerrick <bmj001@gmail.com>
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Continue using WSD for enumerating //, but switch back to
WNet for enumerating shares.
Add trying to enumerate NFS shares for machine names given as FQDN.
Only downcase server names, keep case of shares intact.
Move downcasing into dir_cache class.
Add a comment to explain an extrem weirdness in Windows.
Fixes: 205190a80b ("Cygwin: // and //server: switch to Network Discovery")
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
SMBv1 is ultimately deprecated since Novemer 2023. It's also
not installed by default on latest Windows versions.
Drop using the WNet (SMBv1) API in favor of using Network Discovery.
Given there's no documented Win32 API for that, the code now uses
the Shell API.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
This reverts commit a51147467e.
Dumb thinko on my part. What was supposed to be an optimization
actually broke caseinsensitive globbing in that the entire input
of globbed expressions were downcased.
Drop the unused CCHAR() macro nevertheless.
Fixes: a51147467e ("Cygwin: glob: perform ignore_case_with_glob on input")
Reported-by: Michael Goldshteyn <mgold10000@gmail.com>
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Non-cygwin app may call ReadFile() for empty pipe, which makes
NtQueryObject() for ObjectNameInformation block in fhandler_pipe::
get_query_hdl_per_process. Therefore, do not to try to get query_hdl
for non-cygwin apps.
Addresses: https://github.com/msys2/msys2-runtime/issues/202
Fixes: b531d6b06e ("Cygwin: pipe: Introduce temporary query_hdl.")
Reported-by: Alisa Sireneva, Johannes Schindelin <Johannes.Schindelin@gmx.de>
Reviewed-by: Corinna Vinschen <corinna@vinschen.de>
Signed-off-by: Takashi Yano <takashi.yano@nifty.ne.jp>
The open() call for console sometimes fails if the console owner
process is closing the console by close() at the same time. This
is due to mismatch state of con.owner variable and attaching state
to the console. With this patch, checking con.owner and attaching
to con.owner sequence in open(), and resetting con.owner and freeing
console sequence in close() are guarded by output_mutex to avoid
such a race issue.
Addresses: https://cygwin.com/pipermail/cygwin/2024-March/255575.html
Fixes: 3721a756b0 ("Cygwin: console: Make the console accessible from other terminals.")
Reported-by: Kate Deplaix <kit-ty-kate@outlook.com>
Signed-off-by: Takashi Yano <takashi.yano@nifty.ne.jp>
In the condition that console setup for CTTY and close run at the
sametime, accessing shared console memory which is already unmapped
may occur. With this patch, to avoid this race issue, shared console
memory which belongs to contorolling terminal (CTTY) is kept mapped
as before.
Addresses: https://cygwin.com/pipermail/cygwin/2024-February/255561.html
Fixes: 3721a756b0 ("Cygwin: console: Make the console accessible from other terminals.")
Reported-by: Kate Deplaix <kit-ty-kate@outlook.com>
Signed-off-by: Takashi Yano <takashi.yano@nifty.ne.jp>
Add a missing check for the struct timeval pointer being NULL.
Reported-by: 109224573 <109224573@qq.com>
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
If non-cygwin process is started in pty, closing from_master_nat
pipe handle was missing in fhandler_pty_slave::input_transfer().
This occured because the handle was duplicated but not closed.
https://github.com/msys2/msys2-runtime/issues/198
Fixes: 29431fcb5b ("Cygwin: pty: Inherit typeahead data between two input pipes.")
Reported-by: Hakkin Lain
Signed-off-by: Takashi Yano <takashi.yano@nifty.ne.jp>
Currently, if_nametoindex() and if_indextoname() handle interface names
such as "ethernet_32777", while if_nameindex() returns the names such
as "{5AF7ACD0-D52E-4DFC-A4D0-54D3E6D6B2AC}". This patch unifies the
interface names to the latter.
Fixes: c356901f0d ("Rename if_indextoname to cygwin_if_indextoname (analag for if_nametoindex)")
Reviewed-by: Corinna Vinschen <corinna@vinschen.de>
Signed-off-by: Takashi Yano <takashi.yano@nifty.ne.jp>
So far ps(1) always prints the full path of the executable under
the COMMAND heading.
With -f, print the command line instead.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- Basically maintain a hidden DIR* inside fhandlers.
- lseek has to be tweaked to allow basic seeking on the directory
descriptor.
- the current implementation does not keep the dir positions
between duplicated descriptor in sync. In fact, every descriptor
keeps its own copy of the DIR* and after dup/fork/exec, the
directory position is reset to 0, i. e., to the start of the
directory, as if rewinddir() has been called on the new descriptors.
While this behaviour isn't yet covered by the Issue 8 draft,
a bug report along these lines exists and will probably be
picked up for TC1.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
After using fork(), arc4random does not reseed itself, which
causes the results to become predictable. Activate droppingfork-recognition
Fixes: e0fc33322d ("Delete Cygwin's arc4random in favor of new Newlib implementation")
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Pre-format a command to be executed on a fatal error to run 'dumper'
(using an absolute path).
Factor out executing a pre-formatted command, so we can use that for
invoking the JIT debugger in try_to_debug() (if error_start is present
in the CYGWIN env var) and to invoke dumper when a fatal error occurs.
On a fatal error, if the core file size limit is greater than 1MB,
invoke dumper to write a core dump. Otherwise, if that limit is greater
than 0, write a .stackdump file, as previously.
Adjust and clarify the associated documentation.
Also: Fix so that the error_start JIT debugger is now invoked, even when
ulimit -c is zero.
Also: Fix uses of console_printf() inside exec_prepared_command(). It's
output is written via the Windows console device, so needs to use
Windows-style line endings.
Also: consistently return non-zero from try_to_debug() if we debugged.
Future work: Truncate or remove the file written, if it exceeds the
maximum size set by the ulimit.
Future work: Using the words "fatal error" could probably be improved
on. This means exiting on one of the "certain signals whose default
action is to cause the process to terminate and produce a core dump
file".
This function closes or sets the close-on-exec flag for a specified
range of file descriptors. It is available on FreeBSD and Linux.
Signed-off-by: Christian Franke <christian.franke@t-online.de>
Given that SSDs don't have a seek penalty, we can enable
automatic sparsifying of files on SSDs, even if the "sparse"
mount option is not set.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
open(2) implements O_TRUNC by just reducing the size of the file
to 0, to make sure EAs stay available.
Turns out, file sparseness is not removed this way either, so add
code to do just that.
Fixes: 603ef545bd ("* fhandler.cc (fhandler_base::open): Never open files with FILE_OVERWITE/FILE_OVERWRITE_IF.")
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
First cut of the new, Linux-specific fallocate(2) function.
Do not add any functionality yet, except of basic handling
of FALLOC_FL_KEEP_SIZE.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The fhandler method ftruncate returns either EISDIR if it has been
called on directories, or EINVAL if called on files other than
regular files. This matches what ftruncate(2) is supposed to return,
but it doesn't match posix_fallocate(3), which is supposed to return
ENODEV in both cases.
To accomplish that, return ENODEV from fhandler_base::ftruncate()
and convert it to EINVAL in ftruncate(2). In posix_fallocate(3),
convert EISDIR to ENODEV.
Fixes: 7636b58590 ("* autoload.cc (NtSetInformationFile): Define.")
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
This makes rand(3) ISO C compliant and adds locking to avoid
race conditions.
Reported-by: Bruno Haible <bruno@clisp.org>
Fixes: 8a0efa53e4 ("import newlib-2000-02-17 snapshot")
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Minor updates to profiler and gmondump, which share some code:
- fix operation of error() so it actually works as intended
- resize 4K-size auto buffer reservations to BUFSIZ (==1K)
- remove trailing '\n' from 2nd arg on error() calls everywhere
- provide consistent annotation of Windows error number displays
Fixes: 9887fb27f6126 ("Cygwin: New tool: profiler")
Fixes: 087a3d76d7335 ("Cygwin: New tool: gmondump")
Signed-off-by: Mark Geisert <mark@maxrnd.com>
The exception handling inside of Cygwin functions marked as SIGFE
covers exceptions and lets the library code handle them gracefully.
If these functions want to raise an exception, they have to send a
signal explicitely via raise(3).
That's not what we want in feraiseexcept(). It triggers a floating
point exception explicitely by calling the i387 op "fwait". Being
marked as SIGFE, this exception will be suppressed and the normal
exception handling won't kick in.
Fix this by moving feraiseexcept into the NOSIGFE realm.
Fixes: 0f81b5d4bc ("* Makefile.in (DLL_OFILES): Add new fenv.o module.")
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
cwdstuff::set has a code snippet handling the case where a process
can't create a handle to a directory, e. g., due to permissions.
Commit 88443b0a22 ("cwdstuff: Don't leave from setting the CWD
prematurely on init") introduced a special case to handle this
situation at process initialization. It also introduces an early
mutex release, which is not required, but ok, because we're in the
init phase. Releasing the mutex twice is no problem since the mutexes
are recursive.
Fast forward to commit 0819679a7a ("Cygwin: cwd: use SRWLOCK
instead of muto"). The mechanical change from a recursive mutex
to a non-recursive SRWLOCK failed to notice that this very specific
situation will release the SRWLOCK twice.
Remove the superfluous release action. While at it, don't set dir to
NULL, but h, since dir will get the value of h anyway later on.
Setting h to NULL may not be necessary, but better safe than sorry.
Reported-by: tryandbuy >tryandbuy@proton.me>
Fixes: 88443b0a22 ("cwdstuff: Don't leave from setting the CWD prematurely on init")
Fixes: 0819679a7a ("Cygwin: cwd: use SRWLOCK instead of muto")
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Takashi Yano
Jeremy Drake via Cygwin-patches
Corinna Vinschen
Jon Turney
Christian Franke
Mark Geisert