This simple testcase:
locale_t st = newlocale(LC_ALL_MASK, "C", (locale_t)0);
locale_t st2 = newlocale(LC_CTYPE_MASK, "en_US.UTF-8", st);
is sufficient to reproduce a crash in _newlocale_r. After the first call
to newlocale, `st' points to __C_locale, which is const. When using `st'
as locale base in the second call, _newlocale_r tries to set pointers
inside base to NULL. This is bad if base is __C_locale, obviously.
Add a test to avoid trying to overwrite pointer values inside base if
base is __C_locale.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Given that 64 bit Cygwin defines all file access types (off_t,
fpos_t, and derived types) as 64 bit anyway, there's no reason
left to rely on the stdio64 part of newlib. Use base functions
and base types.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
By default, Newlib uses a huge object of type struct _reent to store
thread-specific data. This object is returned by __getreent() if the
__DYNAMIC_REENT__ Newlib configuration option is defined.
The reentrancy structure contains for example errno and the standard input,
output, and error file streams. This means that if an application only uses
errno it has a dependency on the file stream support even if it does not use
it. This is an issue for lower end targets and applications which need to
qualify the software according to safety standards (for example ECSS-E-ST-40C,
ECSS-Q-ST-80C, IEC 61508, ISO 26262, DO-178, DO-330, DO-333).
If the new _REENT_THREAD_LOCAL configuration option is enabled, then struct
_reent is replaced by dedicated thread-local objects for each struct _reent
member. The thread-local objects are defined in translation units which use
the corresponding object.
In a follow up patch, struct _reent is optionally replaced by dedicated
thread-local objects. In this case,_REENT is optionally defined to NULL. Add
the _REENT_IS_NULL() macro to disable this check on demand.
Add a _REENT_SIG_FUNC() macro to encapsulate access to the
_sig_func member of struct reent. This will help to replace the
struct member with a thread-local storage object in a follow up
patch.
Add a _REENT_CVTBUF() macro to encapsulate access to the _cvtbuf
member of struct reent. This will help to replace the struct
member with a thread-local storage object in a follow up patch.
Add a _REENT_CVTLEN() macro to encapsulate access to the _cvtlen
member of struct reent. This will help to replace the struct
member with a thread-local storage object in a follow-up patch.
Add a _REENT_CLEANUP() macro to encapsulate access to the
__cleanup member of struct reent. This will help to replace the
struct member with a thread-local storage object in a follow up
patch.
Add a _REENT_LOCALE() macro to encapsulate access to the _locale
member of struct reent. This will help to replace the struct
member with a thread-local storage object in a follow up patch.
Add a _REENT_INC() macro to encapsulate access to the _inc member
of struct reent. This will help to replace the struct member with
a thread-local storage object in a follow up patch.
Add a _REENT_STDERR() macro to encapsulate access to the _stderr
member of struct reent. This will help to replace the struct
member with a thread-local storage object in a follow up patch.
Add a _REENT_STDOUT() macro to encapsulate access to the _stdout
member of struct reent. This will help to replace the struct
member with a thread-local storage object in a follow up patch.
Add a _REENT_STDIN() macro to encapsulate access to the _stdin
member of struct reent. This will help to replace the struct
member with a thread-local storage object in a follow up patch.
Add a _REENT_ERRNO() macro to encapsulate the access to the
_errno member of struct reent. This will help to replace the
structure member with a thread-local storage object in a follow
up patch.
Replace uses of __errno_r() with _REENT_ERRNO(). Keep __errno_r() macro for
potential users outside of Newlib.
Use this macro to access the _emergency member of struct _reent. This macro
will help to replace the _emergency member of struct _reent with a thread-local
storage object in a follow up patch.
The "/dev/log" socket existed in pre-FreeBSD times. Later it was
substituted to a compatibility symlink. The symlink creation was
deprecated in FreeBSD 10.2 and 9-STABLE.
Reviewed by: markj
Differential revision: https://reviews.freebsd.org/D35304
Provide sticky ARP flag for network interface which marks it as the
"sticky" one similarly to what we have for bridges. Once interface is
marked sticky, any address resolved using the ARP will be saved as a
static one in the ARP table. Such functionality may be used to prevent
ARP spoofing or to decrease latencies in Ethernet networks.
The drawbacks include potential limitations in usage of ARP-based
load-balancers and high-availability solutions such as carp(4).
The implemented option is disabled by default, therefore should not
impact the default behaviour of the networking stack.
Sponsored by: Conclusive Engineering sp. z o.o.
Reviewed By: melifaro, pauamma_gundo.com
Differential Revision: https://reviews.freebsd.org/D35314
MFC after: 2 weeks
The old fixed-point arithmetic used for calculating load averages had an
overflow at 1024. So on systems with extremely high load, the observed
load average would actually fall back to 0 and shoot up again, creating
a kind of sawtooth graph.
Fix this by using 64-bit math internally, while still reporting the load
average to userspace as a 32-bit number.
Sponsored by: Axcient
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D35134
TCP per RFC793 has 4 reserved flag bits for future use. One
of those bits may be used for Accurate ECN.
This patch is to include these bits in the LRO code to ease
the extensibility if/when these bits are used.
Reviewed By: hselasky, rrs, #transport
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D34127
Hide historical Class A/B/C macros unless IN_HISTORICAL_NETS is defined;
define it for user level. Define IN_MULTICAST separately from IN_CLASSD,
and use it in pf instead of IN_CLASSD. Stop using class for setting
default masks when not specified; instead, define new default mask
(24 bits). Warn when an Internet address is set without a mask.
MFC after: 1 month
Reviewed by: cy
Differential Revision: https://reviews.freebsd.org/D32708
TCP stack sysctl nodes are currently inserted using the stack
name alias. Allow the user to get the current stack's alias to
allow for programatic sysctl access.
Obtained from: Netflix
TCP Hystart draft version -03:
https://datatracker.ietf.org/doc/html/draft-ietf-tcpm-hystartplusplus
Is a new version of hystart that allows one to carefully exit slow start if the RTT
spikes too much. The newer version has a slower-slow-start so to speak that then
kicks in for five round trips. To see if you exited too early, if not into congestion avoidance.
This commit will add that feature to our newreno CC and add the needed bits in rack to
be able to enable it.
Reviewed by: tuexen
Sponsored by: Netflix Inc.
Differential Revision: https://reviews.freebsd.org/D32373
The rack stack, with respect to the rack bits in it, was originally built based
on an early I-D of rack. In fact at that time the TLP bits were in a separate
I-D. The dynamic reordering window based on DSACK events was not present
in rack at that time. It is now part of the RFC and we need to update our stack
to include these features. However we want to have a way to control the feature
so that we can, if the admin decides, make it stay the same way system wide as
well as via socket option. The new sysctl and socket option has the following
meaning for setting:
00 (0) - Keep the old way, i.e. reordering window is 1 and do not use DSACK bytes to add to reorder window
01 (1) - Change the Reordering window to 1/4 of an RTT but do not use DSACK bytes to add to reorder window
10 (2) - Keep the reordering window as 1, but do use SACK bytes to add additional 1/4 RTT delay to the reorder window
11 (3) - reordering window is 1/4 of an RTT and add additional DSACK bytes to increase the reordering window (RFC behavior)
The default currently in the sysctl is 3 so we get standards based behavior.
Reviewed by: tuexen
Sponsored by: Netflix Inc.
Differential Revision: https://reviews.freebsd.org/D31506
Add a PNOLOCK flag so that, in the race circumstance where
wakeup races are externally mitigated, tsleep() can be
called with a sleep time of 0 without triggering an
an assertion.
Reviewed by: jhb
Sponsored by: Netflix
SO_RERROR indicates that receive buffer overflows should be handled as
errors. Historically receive buffer overflows have been ignored and
programs could not tell if they missed messages or messages had been
truncated because of overflows. Since programs historically do not
expect to get receive overflow errors, this behavior is not the
default.
This is really really important for programs that use route(4) to keep
in sync with the system. If we loose a message then we need to reload
the full system state, otherwise the behaviour from that point is
undefined and can lead to chasing bogus bug reports.
Reviewed by: philip (network), kbowling (transport), gbe (manpages)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D26652
Import OpenBSD's syncookie support for pf. This feature help pf resist
TCP SYN floods by only creating states once the remote host completes
the TCP handshake rather than when the initial SYN packet is received.
This is accomplished by using the initial sequence numbers to encode a
cookie (hence the name) in the SYN+ACK response and verifying this on
receipt of the client ACK.
Reviewed by: kbowling
Obtained from: OpenBSD
MFC after: 1 week
Sponsored by: Modirum MDPay
Differential Revision: https://reviews.freebsd.org/D31138
so we can test various changes to the slop value in timers.
Timer_slop, in TCP, has been 200ms for a long time. This value dates back
a long time when delayed ack timers were longer and links were slower. A
200ms timer slop allows 1 MSS to be sent over a 60kbps link. Its possible that
lowering this value to something more in line with todays delayed ack values (40ms)
might improve TCP. This bit of code makes it so rack can, via a socket option,
adjust the timer slop.
Reviewed by: mtuexen
Sponsered by: Netflix Inc
Differential Revision: https://reviews.freebsd.org/D30249
Recover from excessive losses without reverting to a
retransmission timeout (RTO). Disabled by default, enable
with sysctl net.inet.tcp.do_lrd=1
Reviewed By: #transport, rrs, tuexen, #manpages
Sponsored by: Netapp, Inc.
Differential Revision: https://reviews.freebsd.org/D28931
versions of rack and bbr. This fixes several breakages (panics) since the
tcp_lro code was committed that have been reported. Quite a few new features
are now in rack (prefecting of DGP -- Dynamic Goodput Pacing among the
largest). There is also support for ack-war prevention. Documents comming soon
on rack..
Sponsored by: Netflix
Reviewed by: rscheff, mtuexen
Differential Revision: https://reviews.freebsd.org/D30036
Its use is for cases where some filler is needed for cmd, or we need an
indication that there were no cmd supplied, and so on.
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D29935
Teach poll(2) to support Linux-style POLLRDHUP events for sockets, if
requested. Triggered when the remote peer shuts down writing or closes
its end.
Reviewed by: kib
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D29757
Adding support for TCP over UDP allows communication with
TCP stacks which can be implemented in userspace without
requiring special priviledges or specific support by the OS.
This is joint work with rrs.
Reviewed by: rrs
Sponsored by: Netflix, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D29469
A lot of small arm64 gadgets are using 1500000 as console speed.
While cu can perfectly deal with this some 3rd party software, e.g.,
comms/conserver-con add speeds based on B<n> being defined.
Having it defined here simplifies enhancing other software.
Obtained-from: NetBSD sys/sys/termios.h 1.36
MFC-after: 2 weeks
Reviewed-by: philip (,okayed by imp)
Differential Revision: https://reviews.freebsd.org/D29209
should be handled as errors. Historically receive buffer overflows have been
ignored and programs could not tell if they missed messages or messages had
been truncated because of overflows. Since programs historically do not expect
to get receive overflow errors, this behavior is not the default.
This is really really important for programs that use route(4) to keep in sync
with the system. If we loose a message then we need to reload the full system
state, otherwise the behaviour from that point is undefined and can lead
to chasing bogus bug reports.
This makes roundup2/rounddown2 type- and const-preserving and allows
using it on pointer types without casting to uintptr_t first. Not
performing pointer-to-integer conversions also helps the compiler's
optimization passes and can therefore result in better code generation.
When using it with integer values there should be no change other than
the compiler checking that the alignment value is a valid power-of-two.
I originally implemented these builtins for CHERI a few years ago and
they have been very useful for CheriBSD. However, they are also useful
for non-CHERI code so I was able to upstream them for Clang 10.0.
Rationale from the clang documentation:
Clang provides builtins to support checking and adjusting alignment
of pointers and integers. These builtins can be used to avoid relying
on implementation-defined behavior of arithmetic on integers derived
from pointers. Additionally, these builtins retain type information
and, unlike bitwise arithmetic, they can perform semantic checking on
the alignment value.
There is also a feature request for GCC, so GCC may also support it in
the future: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=98641
Reviewed By: brooks, jhb, imp
Differential Revision: https://reviews.freebsd.org/D28332
Originally IFCAP_NOMAP meant that the mbuf has external storage pointer
that points to unmapped address. Then, this was extended to array of
such pointers. Then, such mbufs were augmented with header/trailer.
Basically, extended mbufs are extended, and set of features is subject
to change. The new name should be generic enough to avoid further
renaming.
These functions get/set tty winsize respectively, and are trivial wrappers
around corresponding termio ioctls.
The functions are expected to be a part of POSIX.1 issue 8:
https://www.austingroupbugs.net/view.php?id=1151#c3856.
They are currently available in NetBSD and in musl libc.
PR: 251868
Submitted by: Soumendra Ganguly <soumendraganguly@gmail.com>
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D27650
In order to efficiently serve web traffic on a NUMA
machine, one must avoid as many NUMA domain crossings as
possible. With SO_REUSEPORT_LB, a number of workers can share a
listen socket. However, even if a worker sets affinity to a core
or set of cores on a NUMA domain, it will receive connections
associated with all NUMA domains in the system. This will lead to
cross-domain traffic when the server writes to the socket or
calls sendfile(), and memory is allocated on the server's local
NUMA node, but transmitted on the NUMA node associated with the
TCP connection. Similarly, when the server reads from the socket,
he will likely be reading memory allocated on the NUMA domain
associated with the TCP connection.
This change provides a new socket ioctl, TCP_REUSPORT_LB_NUMA. A
server can now tell the kernel to filter traffic so that only
incoming connections associated with the desired NUMA domain are
given to the server. (Of course, in the case where there are no
servers sharing the listen socket on some domain, then as a
fallback, traffic will be hashed as normal to all servers sharing
the listen socket regardless of domain). This allows a server to
deal only with traffic that is local to its NUMA domain, and
avoids cross-domain traffic in most cases.
This patch, and a corresponding small patch to nginx to use
TCP_REUSPORT_LB_NUMA allows us to serve 190Gb/s of kTLS encrypted
https media content from dual-socket Xeons with only 13% (as
measured by pcm.x) cross domain traffic on the memory controller.
Reviewed by: jhb, bz (earlier version), bcr (man page)
Tested by: gonzo
Sponsored by: Netfix
Differential Revision: https://reviews.freebsd.org/D21636
struct ifconf and struct ifreq use the odd style "struct<tab>foo".
struct ifdrv seems to have tried to follow this but was committed with
spaces in place of most tabs resulting in "struct<space><space>ifdrv".
MFC after: 3 days
As this ABI is still fresh (r367287), let's correct some mistakes now:
- Version the structure to allow for future changes
- Include sender's pid in control message structure
- Use a distinct control message type from the cmsgcred / sockcred mess
Discussed with: kib, markj, trasz
Differential Revision: https://reviews.freebsd.org/D27084
This option is intended to be semantically identical to Linux's
SOL_SOCKET:SO_PASSCRED. For now, it is mutually exclusive with the
pre-existing sockopt SOL_LOCAL:LOCAL_CREDS.
Reviewed by: markj (penultimate version)
Differential Revision: https://reviews.freebsd.org/D27011
Bring in the long-overdue 4.4BSD-Lite2 rev 8.3 by cgd of
sys/ioccom.h. This uses UL suffix for the IOC_* constants so they
don't sign extend. Also bring in the handy diagram from NetBSD's
version of this file. This alters the 4.4BSD-Lite2 code slightly
in a way that's semantically the same but more compact.
This should stop the warnings from Chrome for bogus sign extension.
Reviewed by: kib@, jhb@
Differential Revision: https://reviews.freebsd.org/D26423
- Add a new send tag type for a send tag that supports both rate
limiting (packet pacing) and TLS offload (mostly similar to D22669
but adds a separate structure when allocating the new tag type).
- When allocating a send tag for TLS offload, check to see if the
connection already has a pacing rate. If so, allocate a tag that
supports both rate limiting and TLS offload rather than a plain TLS
offload tag.
- When setting an initial rate on an existing ifnet KTLS connection,
set the rate in the TCP control block inp and then reset the TLS
send tag (via ktls_output_eagain) to reallocate a TLS + ratelimit
send tag. This allocates the TLS send tag asynchronously from a
task queue, so the TLS rate limit tag alloc is always sleepable.
- When modifying a rate on a connection using KTLS, look for a TLS
send tag. If the send tag is only a plain TLS send tag, assume we
failed to allocate a TLS ratelimit tag (either during the
TCP_TXTLS_ENABLE socket option, or during the send tag reset
triggered by ktls_output_eagain) and ignore the new rate. If the
send tag is a ratelimit TLS send tag, change the rate on the TLS tag
and leave the inp tag alone.
- Lock the inp lock when setting sb_tls_info for a socket send buffer
so that the routines in tcp_ratelimit can safely dereference the
pointer without needing to grab the socket buffer lock.
- Add an IFCAP_TXTLS_RTLMT capability flag and associated
administrative controls in ifconfig(8). TLS rate limit tags are
only allocated if this capability is enabled. Note that TLS offload
(whether unlimited or rate limited) always requires IFCAP_TXTLS[46].
Reviewed by: gallatin, hselasky
Relnotes: yes
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D26691
It is lightweight way to check if an IPv4 address exists.
Submitted by: Roy Marples
Reviewed by: gnn, melifaro
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D26636
This adds a new IP_PROTO / IPV6_PROTO setsockopt (getsockopt)
option IP(V6)_VLAN_PCP, which can be set to -1 (interface
default), or explicitly to any priority between 0 and 7.
Note that for untagged traffic, explicitly adding a
priority will insert a special 801.1Q vlan header with
vlan ID = 0 to carry the priority setting
Reviewed by: gallatin, rrs
MFC after: 2 weeks
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D26409
This change is based on the nexthop objects landed in D24232.
The change introduces the concept of nexthop groups.
Each group contains the collection of nexthops with their
relative weights and a dataplane-optimized structure to enable
efficient nexthop selection.
Simular to the nexthops, nexthop groups are immutable. Dataplane part
gets compiled during group creation and is basically an array of
nexthop pointers, compiled w.r.t their weights.
With this change, `rt_nhop` field of `struct rtentry` contains either
nexthop or nexthop group. They are distinguished by the presense of
NHF_MULTIPATH flag.
All dataplane lookup functions returns pointer to the nexthop object,
leaving nexhop groups details inside routing subsystem.
User-visible changes:
The change is intended to be backward-compatible: all non-mpath operations
should work as before with ROUTE_MPATH and net.route.multipath=1.
All routes now comes with weight, default weight is 1, maximum is 2^24-1.
Current maximum multipath group width is statically set to 64.
This will become sysctl-tunable in the followup changes.
Using functionality:
* Recompile kernel with ROUTE_MPATH
* set net.route.multipath to 1
route add -6 2001:db8::/32 2001:db8::2 -weight 10
route add -6 2001:db8::/32 2001:db8::3 -weight 20
netstat -6On
Nexthop groups data
Internet6:
GrpIdx NhIdx Weight Slots Gateway Netif Refcnt
1 ------- ------- ------- --------------------------------------- --------- 1
13 10 1 2001:db8::2 vlan2
14 20 2 2001:db8::3 vlan2
Next steps:
* Land outbound hashing for locally-originated routes ( D26523 ).
* Fix net/bird multipath (net/frr seems to work fine)
* Add ROUTE_MPATH to GENERIC
* Set net.route.multipath=1 by default
Tested by: olivier
Reviewed by: glebius
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D26449
For interfaces that do not support SIOCGIFMEDIA (for which there are
quite a few) the only fallback is to query the interface for
if_data->ifi_link_state. While it's possible to get at if_data for an
interface via getifaddrs(3) or sysctl, both are heavy weight mechanisms.
SIOCGIFDATA is a simple ioctl to retrieve this fast with very little
resource use in comparison. This implementation mirrors that of other
similar ioctls in FreeBSD.
Submitted by: Roy Marples <roy@marples.name>
Reviewed by: markj
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D26538
The fastpath in tcp_output tries to send out
full segments, and avoid sending partial segments by
comparing against the static t_maxseg variable.
That value does not consider tcp options like timestamps,
while the initial window calculation is using
the correct dynamic tcp_maxseg() function.
Due to this interaction, the last, full size segment
is considered too short and not sent out immediately.
Reviewed by: tuexen
MFC after: 2 weeks
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D26478
for hw checksumming and TSO for VXLAN traffic.
These are similar to the existing VLAN capabilities.
Reviewed by: kib@
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D25873
Created with shm_open2(SHM_LARGEPAGE) and then configured with
FIOSSHMLPGCNF ioctl, largepages posix shared memory objects guarantee
that all userspace mappings of it are served by superpage non-managed
mappings.
Only amd64 for now, both 2M and 1G superpages can be requested, the
later requires CPU feature.
Reviewed by: markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D24652
Currently we use a single bit to indicate whether the virtual page is
part of a superpage. To support a forthcoming implementation of
non-transparent 1GB superpages, it is useful to provide more detailed
information about large page sizes.
The change converts MINCORE_SUPER into a mask for MINCORE_PSIND(psind)
values, indicating a mapping of size psind, where psind is an index into
the pagesizes array returned by getpagesizes(3), which in turn comes
from the hw.pagesizes sysctl. MINCORE_PSIND(1) is equal to the old
value of MINCORE_SUPER.
For now, two bits are used to record the page size, permitting values
of MAXPAGESIZES up to 4.
Reviewed by: alc, kib
Sponsored by: Juniper Networks, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D26238
The constant seems to exists on MacOS X >= 10.8.
Requested by: swills
Reviewed by: allanjude, kevans
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D25933
Lack of SHM_GROW_ON_WRITE is actively breaking Python's memfd_create tests,
so go ahead and implement it. A future change will make memfd_create always
set SHM_GROW_ON_WRITE, to match Linux behavior and unbreak Python's tests
on -CURRENT.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D25502
This change adds Hyper-V socket feature in FreeBSD. New socket address
family AF_HYPERV and its kernel support are added.
Submitted by: Wei Hu <weh@microsoft.com>
Reviewed by: Dexuan Cui <decui@microsoft.com>
Relnotes: yes
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D24061
- Add a new TCP_RXTLS_ENABLE socket option to set the encryption and
authentication algorithms and keys as well as the initial sequence
number.
- When reading from a socket using KTLS receive, applications must use
recvmsg(). Each successful call to recvmsg() will return a single
TLS record. A new TCP control message, TLS_GET_RECORD, will contain
the TLS record header of the decrypted record. The regular message
buffer passed to recvmsg() will receive the decrypted payload. This
is similar to the interface used by Linux's KTLS RX except that
Linux does not return the full TLS header in the control message.
- Add plumbing to the TOE KTLS interface to request either transmit
or receive KTLS sessions.
- When a socket is using receive KTLS, redirect reads from
soreceive_stream() into soreceive_generic().
- Note that this interface is currently only defined for TLS 1.1 and
1.2, though I believe we will be able to reuse the same interface
and structures for 1.3.
in getting the latest rack and bbr in from the NF repo. When those come in the
OOB data handling will be fixed where Skyzaller crashes.
Differential Revision: https://reviews.freebsd.org/D24575
This change is build on top of nexthop objects introduced in r359823.
Nexthops are separate datastructures, containing all necessary information
to perform packet forwarding such as gateway interface and mtu. Nexthops
are shared among the routes, providing more pre-computed cache-efficient
data while requiring less memory. Splitting the LPM code and the attached
data solves multiple long-standing problems in the routing layer,
drastically reduces the coupling with outher parts of the stack and allows
to transparently introduce faster lookup algorithms.
Route caching was (re)introduced to minimise (slow) routing lookups, allowing
for notably better performance for large TCP senders. Caching works by
acquiring rtentry reference, which is protected by per-rtentry mutex.
If the routing table is changed (checked by comparing the rtable generation id)
or link goes down, cache record gets withdrawn.
Nexthops have the same reference counting interface, backed by refcount(9).
This change merely replaces rtentry with the actual forwarding nextop as a
cached object, which is mostly mechanical. Other moving parts like cache
cleanup on rtable change remains the same.
Differential Revision: https://reviews.freebsd.org/D24340
specified by a #define. Also, add a comment describing the historical context
for this length.
Reviewed by: bz, jhb, kbowling (previous version)
MFC after: 2 weeks
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D24272
This is the foundational change for the routing subsytem rearchitecture.
More details and goals are available in https://reviews.freebsd.org/D24141 .
This patch introduces concept of nexthop objects and new nexthop-based
routing KPI.
Nexthops are objects, containing all necessary information for performing
the packet output decision. Output interface, mtu, flags, gw address goes
there. For most of the cases, these objects will serve the same role as
the struct rtentry is currently serving.
Typically there will be low tens of such objects for the router even with
multiple BGP full-views, as these objects will be shared between routing
entries. This allows to store more information in the nexthop.
New KPI:
struct nhop_object *fib4_lookup(uint32_t fibnum, struct in_addr dst,
uint32_t scopeid, uint32_t flags, uint32_t flowid);
struct nhop_object *fib6_lookup(uint32_t fibnum, const struct in6_addr *dst6,
uint32_t scopeid, uint32_t flags, uint32_t flowid);
These 2 function are intended to replace all all flavours of
<in_|in6_>rtalloc[1]<_ign><_fib>, mpath functions and the previous
fib[46]-generation functions.
Upon successful lookup, they return nexthop object which is guaranteed to
exist within current NET_EPOCH. If longer lifetime is desired, one can
specify NHR_REF as a flag and get a referenced version of the nexthop.
Reference semantic closely resembles rtentry one, allowing sed-style conversion.
Additionally, another 2 functions are introduced to support uRPF functionality
inside variety of our firewalls. Their primary goal is to hide the multipath
implementation details inside the routing subsystem, greatly simplifying
firewalls implementation:
int fib4_lookup_urpf(uint32_t fibnum, struct in_addr dst, uint32_t scopeid,
uint32_t flags, const struct ifnet *src_if);
int fib6_lookup_urpf(uint32_t fibnum, const struct in6_addr *dst6, uint32_t scopeid,
uint32_t flags, const struct ifnet *src_if);
All functions have a separate scopeid argument, paving way to eliminating IPv6 scope
embedding and allowing to support IPv4 link-locals in the future.
Structure changes:
* rtentry gets new 'rt_nhop' pointer, slightly growing the overall size.
* rib_head gets new 'rnh_preadd' callback pointer, slightly growing overall sz.
Old KPI:
During the transition state old and new KPI will coexists. As there are another 4-5
decent-sized conversion patches, it will probably take a couple of weeks.
To support both KPIs, fields not required by the new KPI (most of rtentry) has to be
kept, resulting in the temporary size increase.
Once conversion is finished, rtentry will notably shrink.
More details:
* architectural overview: https://reviews.freebsd.org/D24141
* list of the next changes: https://reviews.freebsd.org/D24232
Reviewed by: ae,glebius(initial version)
Differential Revision: https://reviews.freebsd.org/D24232
due to peer pressure switch over to opt-in instead of opt-out for epoch.
Instead of IFF_NEEDSEPOCH, provide IFF_KNOWSEPOCH. If driver marks
itself with IFF_KNOWSEPOCH, then ether_input() would not enter epoch
when processing its packets.
Now this will create recursive entrance in epoch in >90% network
drivers, but will guarantee safeness of the transition.
Mark several tested drivers as IFF_KNOWSEPOCH.
Reviewed by: hselasky, jeff, bz, gallatin
Differential Revision: https://reviews.freebsd.org/D23674
that marks Ethernet interfaces that supposedly may call into ether_input()
without network epoch.
They all need to be reviewed before 13.0-RELEASE. Some may need
be fixed. The flag is not planned to be used in the kernel for
a long time.
This makes it possible to retrieve per-connection statistical
information such as the receive window size, RTT, or goodput,
using a newly added TCP_STATS getsockopt(3) option, and extract
them using the stats_voistat_fetch(3) API.
See the net/tcprtt port for an example consumer of this API.
Compared to the existing TCP_INFO system, the main differences
are that this mechanism is easy to extend without breaking ABI,
and provides statistical information instead of raw "snapshots"
of values at a given point in time. stats(3) is more generic
and can be used in both userland and the kernel.
Reviewed by: thj
Tested by: thj
Obtained from: Netflix
Relnotes: yes
Sponsored by: Klara Inc, Netflix
Differential Revision: https://reviews.freebsd.org/D20655
add audit support for shm_rename
Co-mingling two things here:
* Addressing some feedback from Konstantin and Kyle re: jail,
capability mode, and a few other things
* Adding audit support as promised.
The audit support change includes a partial refresh of OpenBSM from
upstream, where the change to add shm_rename has already been
accepted. Matthew doesn't plan to work on refreshing anything else to
support audit for those new event types.
Submitted by: Matthew Bryan <matthew.bryan@isilon.com>
Reviewed by: kib
Relnotes: Yes
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D22083
This adds the glue to allocate TLS sessions and invokes it from
the TLS enable socket option handler. This also adds some counters
for active TOE sessions.
The TOE KTLS mode is returned by getsockopt(TLSTX_TLS_MODE) when
TOE KTLS is in use on a socket, but cannot be set via setsockopt().
To simplify various checks, a TLS session now includes an explicit
'mode' member set to the value returned by TLSTX_TLS_MODE. Various
places that used to check 'sw_encrypt' against NULL to determine
software vs ifnet (NIC) TLS now check 'mode' instead.
Reviewed by: np, gallatin
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D21891
This API is still young enough that I would expect no one to be dependant on
this yet... Swap the ordering while it's young to match Linux values to
potentially ease implementation of linuxolator syscall, being able to reuse
existing constants.
Add an atomic shm rename operation, similar in spirit to a file
rename. Atomically unlink an shm from a source path and link it to a
destination path. If an existing shm is linked at the destination
path, unlink it as part of the same atomic operation. The caller needs
the same permissions as shm_unlink to the shm being renamed, and the
same permissions for the shm at the destination which is being
unlinked, if it exists. If those fail, EACCES is returned, as with the
other shm_* syscalls.
truss support is included; audit support will come later.
This commit includes only the implementation; the sysent-generated
bits will come in a follow-on commit.
Submitted by: Matthew Bryan <matthew.bryan@isilon.com>
Reviewed by: jilles (earlier revision)
Reviewed by: brueffer (manpages, earlier revision)
Relnotes: yes
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D21423
memfd_create is effectively a SHM_ANON shm_open(2) mapping with optional
CLOEXEC and file sealing support. This is used by some mesa parts, some
linux libs, and qemu can also take advantage of it and uses the sealing to
prevent resizing the region.
This reimplements shm_open in terms of shm_open2(2) at the same time.
shm_open(2) will be moved to COMPAT12 shortly.
Reviewed by: markj, kib
Differential Revision: https://reviews.freebsd.org/D21393
shm_open2 allows a little more flexibility than the original shm_open.
shm_open2 doesn't enforce CLOEXEC on its callers, and it has a separate
shmflag argument that can be expanded later. Currently the only shmflag is
to allow file sealing on the returned fd.
shm_open and memfd_create will both be implemented in libc to use this new
syscall.
__FreeBSD_version is bumped to indicate the presence.
Reviewed by: kib, markj
Differential Revision: https://reviews.freebsd.org/D21393
This is a completely separate TCP stack (tcp_bbr.ko) that will be built only if
you add the make options WITH_EXTRA_TCP_STACKS=1 and also include the option
TCPHPTS. You can also include the RATELIMIT option if you have a NIC interface
that supports hardware pacing, BBR understands how to use such a feature.
Note that this commit also adds in a general purpose time-filter which
allows you to have a min-filter or max-filter. A filter allows you to
have a low (or high) value for some period of time and degrade slowly
to another value has time passes. You can find out the details of
BBR by looking at the original paper at:
https://queue.acm.org/detail.cfm?id=3022184
or consult many other web resources you can find on the web
referenced by "BBR congestion control". It should be noted that
BBRv1 (which this is) does tend to unfairness in cases of small
buffered paths, and it will usually get less bandwidth in the case
of large BDP paths(when competing with new-reno or cubic flows). BBR
is still an active research area and we do plan on implementing V2
of BBR to see if it is an improvement over V1.
Sponsored by: Netflix Inc.
Differential Revision: https://reviews.freebsd.org/D21582
Define __daddr_t in _types.h and use it in filio.h
Reported by: ian, bde
Reviewed by: ian, imp, cem
MFC after: 2 weeks
MFC-With: 349233
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D20715
This ioctl exposes VOP_BMAP information to userland. It can be used by
programs like fragmentation analyzers and optimized cp implementations. But
I'm using it to test fusefs's VOP_BMAP implementation. The "2" in the name
distinguishes it from the similar but incompatible FIBMAP ioctls in NetBSD
and Linux. FIOBMAP2 differs from FIBMAP in that it uses a 64-bit block
number instead of 32-bit, and it also returns runp and runb.
Reviewed by: mckusick
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D20705
ioctl(2) commands only have meaning in the context of a file descriptor
so translating them in the syscall layer is incorrect.
The new handler users an accessor to retrieve/construct a pointer from
the last member of the passed structure and relies on type punning to
access the other member which requires no translation.
Unlike r339174 this change supports both places FIODGNAME is handled.
Reviewed by: kib
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D17475
Mainly focus on files that use BSD 3-Clause license.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
This makes roundup2/rounddown2 type- and const-preserving and allows
using it on pointer types without casting to uintptr_t first. Not
performing pointer-to-integer conversions also helps the compiler's
optimization passes and can therefore result in better code generation.
When using it with integer values there should be no change other than
the compiler checking that the alignment value is a valid power-of-two.
I originally implemented these builtins for CHERI a few years ago and
they have been very useful for CheriBSD. However, they are also useful
for non-CHERI code so I was able to upstream them for Clang 10.0.
Rationale from the clang documentation:
Clang provides builtins to support checking and adjusting alignment
of pointers and integers. These builtins can be used to avoid relying
on implementation-defined behavior of arithmetic on integers derived
from pointers. Additionally, these builtins retain type information
and, unlike bitwise arithmetic, they can perform semantic checking on
the alignment value.
There is also a feature request for GCC, so GCC may also support it in
the future: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=98641
Reviewed By: brooks, jhb, imp
Differential Revision: https://reviews.freebsd.org/D28332
The age of the intel compiler support is so old as to be
uninteresting. No recent recports of intel compiler support have been
received. Remove all the special case workarounds for the Intel
compiler. Should there be interest in supporting the compiler, contact
me and I'll work with people to make it happen, though I suspect these
instances are more likely to be in the way than to be helpful.
Reviewed by: cem, emaste, vangyzen, dim
Differential Revision: https://reviews.freebsd.org/D26817
This fixes the following warning in libbsd:
rtems/blkdev.h:200:10: warning: implicit declaration of function 'ioctl'; did
you mean 'ifioctl'? [-Wimplicit-function-declaration]
Remove unnecessary includes.
Define FD_SETSIZE (<sys/select.h>) to be 1024 by default, and define
NOFILE (<sys/param.h>) to be OPEN_MAX (== 3200) by default.
Remove the comment in <sys/select.h> that FD_SETSIZE should be >=
NOFILE.
Bump API minor.
Addresses: https://cygwin.com/pipermail/cygwin/2022-July/251839.html
This reverts commit 1f8f7e2d54, "* libc/stdio/refill.c (__srefill):
Try again after EOF on Cygwin." If EOF is set on a file, the stdio
input functions will now immediately return EOF rather than trying
again to read. This aligns Cygwin's behavior to that of Linux.
Addresses: https://cygwin.com/pipermail/cygwin/2022-June/251672.html
The introduction of <sched.h> improved compatibility with some 3rd
party software, but caused the configure scripts of some ports to
assume that they were run in a GLIBC compatible environment.
Parts of sched.h were made conditional on -D_WITH_CPU_SET_T being
added to ports, but there still were compatibility issues due to
invalid assumptions made in autoconfigure scripts.
The differences between the FreeBSD version of macros like CPU_AND,
CPU_OR, etc. and the GLIBC versions was in the number of arguments:
FreeBSD used a 2-address scheme (one source argument is also used as
the destination of the operation), while GLIBC uses a 3-adderess
scheme (2 source operands and a separately passed destination).
The GLIBC scheme provides a super-set of the functionality of the
FreeBSD macros, since it does not prevent passing the same variable
as source and destination arguments. In code that wanted to preserve
both source arguments, the FreeBSD macros required a temporary copy of
one of the source arguments.
This patch set allows to unconditionally provide functions and macros
expected by 3rd party software written for GLIBC based systems, but
breaks builds of externally maintained sources that use any of the
following macros: CPU_AND, CPU_ANDNOT, CPU_OR, CPU_XOR.
One contributed driver (contrib/ofed/libmlx5) has been patched to
support both the old and the new CPU_OR signatures. If this commit
is merged to -STABLE, the version test will have to be extended to
cover more ranges.
Ports that have added -D_WITH_CPU_SET_T to build on -CURRENT do
no longer require that option.
The FreeBSD version has been bumped to 1400046 to reflect this
incompatible change.
Reviewed by: kib
MFC after: 2 weeks
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D33451
The changes to the bitset macros allowed sched.h to be included
into userland programs without name space pollution due to BIT_*
and BITSET_* macros.
The definition of a "struct bitset" had been overlooked. This name
space pollution caused the build of port print/miktex to fail.
This commit makes the definition of struct bitset depend on the
same condition as the visibility of the BIT_* and BITSET_* macros,
i.e. needs _KERNEL or _WANT_FREEBSD_BITSET to be defined before
including sys/_bitset.h.
It has been tested with "make universe" since a prior attempt to
fix the issue broke the PowerPC64 kernel build.
This commit shall be MFCed together with commit 5e04571cf3c.
Reported by: arrowd
MFC after: 1 month
It caused kernel build for PowerPC64 to fail.
A different patch is being tested with make universe to make sure it
works on all architectures.
MFC after: 1 month<N [day[s]|week[s]|month[s]]. Request a reminder email>
There is a reference to malloc() in #define __BITSET_ALLOC. Even
though this macro is only defined but not used, it causes the lang/gcc
ports to fail. The gcc ports "poison" a number of functions including
malloc() and prevent their use (including in macro definitions).
This commit moved the declaration of __BITSET_ALLOC into the
conditional block that depends on _KERNEL or _WANT_FREEBSD_BITSET
being defined.
There is no use of __BITSET_ALLOC in the FreeBSD sources, and userland
programs that want to use BITSEC_ALLOC will define _WANT_FREEBSD_BITSET
anyway.
This patch has been tested by building lang/gcc11 and a successful
make buildworld.
This commit shall be MFCed together with commit 5e04571cf3c.
MFC after: 1 month
The changes to the bitset macros allowed sched.h to be included into
userland programs without name space pollution due to BIT_* and
BITSET_* macros.
The definition of a global variable "bitset" had been overlooked.
This name space pollution caused a compile failure in print/miktex.
This commit renames the bitset variable to __bitset with the same
mapping back to the bitset if _KERNEL or _WANT_FREEBSD_BITSET is
defined.
This fix has been suggested by kib. It has been tested to let the
build of the print/miktex port succeed and to not break buildworld.
This commit shall be MFCed together with commit 5e04571cf3c.
Reported by: arrowd
MFC after: 1 month
Add two underscore characters "__" to names of BIT_* and BITSET_*
macros to move them to the implementation name space and to prevent
a name space pollution due to BIT_* macros in 3rd party programs with
conflicting parameter signatures.
These prefixed macro names are used in kernel header files to define
macros in e.g. sched.h, sys/cpuset.h and sys/domainset.h.
If C programs are built with either -D_KERNEL (automatically passed
when building a kernel or kernel modules) or -D_WANT_FREENBSD_BITSET
(or this macros is defined in the source code before including the
bitset macros), then all macros are made visible with their previous
names, too. E.g., both __BIT_SET() and BIT_SET() are visible with
either of _KERNEL or _WANT_FREEBSD_BITSET defined.
The main reason for this change is that some 3rd party sources
including sched.h have been found to contain conflicting BIT_*
macros.
As a work-around, parts of shed.h have been made conditional and
depend on _WITH_CPU_SET_T being set when sched.h is included.
Ports that expect the full functionality provided by sched.h need
to be built with -D_WITH_CPU_SET_T. But this leads to conflicts if
BIT_* macros are defined in that program, too.
This patch set makes all of sched.h visible again without this
parameter being passed and without any name space pollution due
to BIT_* macros becoming visible when sched.h is included.
This patch set will be backported to the STABLE branches, but ports
will need to use -D_WITH_CPU_SET_T as long as there are supported
releases that do not contain these patches.
Reviewed by: kib, markj
MFC after: 1 month
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D33235
This implementation is faster and doesn't modify the cpuset, so it lets
us avoid some unnecessary copying as well. No functional change
intended.
This is a re-application of commit
9068f6ea697b1b28ad1326a4c7a9ba86f08b985e.
Reviewed by: cem, kib, jhb
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32029
Eliminate the nested loops and re-implement following a suggestion from
rlibby.
Add some simple regression tests.
Reviewed by: rlibby, kib
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32472
This reverts commit 9068f6ea697b1b28ad1326a4c7a9ba86f08b985e.
The underlying macro needs to be reworked to avoid problems with control
flow statements.
Reported by: rlibby
This implementation is faster and doesn't modify the cpuset, so it lets
us avoid some unnecessary copying as well. No functional change
intended.
Reviewed by: cem, kib, jhb
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32029
These allow one to non-destructively iterate over the set or clear bits
in a bitset. The motivation is that we have several code fragments
which iterate over a CPU set like this:
while ((cpu = CPU_FFS(&cpus)) != 0) {
cpu--;
CPU_CLR(cpu, &cpus);
<do something>;
}
This is slow since CPU_FFS begins the search at the beginning of the
bitset each time. On amd64 and arm64, CPU sets have size 256, so there
are four limbs in the bitset and we do a lot of unnecessary scanning.
A second problem is that this is destructive, so code which needs to
preserve the original set has to make a copy. In particular, we have
quite a few functions which take a cpuset_t parameter by value, meaning
that each call has to copy the 32 byte cpuset_t.
The new macros address both problems.
Reviewed by: cem, kib
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32028
iflib now supports mapping each (TX,RX) queue pair to the same CPU
(default), to separate CPUs, or to a pair of physical and logical CPUs
that share the same L2 cache. The mapping mechanism supports unequal
numbers of TX and RX queues, with the excess queues always being
mapped to consecutive physical CPUs. When the platform cannot
distinguish between physical and logical CPUs, all are treated as
physical CPUs. See the comment on get_cpuid_for_queue() for the
entire matrix.
The following device-specific tunables influence the mapping process:
dev.<device>.<unit>.iflib.core_offset (existing)
dev.<device>.<unit>.iflib.separate_txrx (existing)
dev.<device>.<unit>.iflib.use_logical_cores (new)
The following new, read-only sysctls provide visibility of the mapping
results:
dev.<device>.<unit>.iflib.{t,r}xq<n>.cpu
When an iflib driver allocates TX softirqs without providing reference
RX IRQs, iflib now binds those TX softirqs to CPUs using the above
mapping mechanism (that is, treats them as if they were TX IRQs).
Previously, such bindings were left up to the grouptaskqueue code and
thus fell outside of the iflib CPU mapping strategy.
Reviewed by: kbowling
Tested by: olivier, pkelsey
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D24094
That is, provide wrappers around the atomic_testandclear and
atomic_testandset primitives.
Submitted by: jeff
Reviewed by: cem, kib, markj
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D22702
An upcoming patch to use the bitset macros for tracking vm page
dump information could conceivably need more than INT_MAX bits.
Expand the bit type to long so that the extra range is available
on 64-bit platforms where it would most likely be needed.
CPUSET_COUNT and DOMAINSET_COUNT are also modified to remain of
type `int`.
Reviewed by: kib, markj
Approved by: scottl (implicit)
MFC after: 1 week
Sponsored by: Ampere Computing, Inc.
Differential Revision: https://reviews.freebsd.org/D26190
s/BIT_NAND/BIT_ANDNOT/, and for CPU and DOMAINSET too. The actual
implementation is "and not" (or "but not"), i.e. A but not B.
Fortunately this does appear to be what all existing callers want.
Don't supply a NAND (not (A and B)) operation at this time.
Discussed with: jeff
Reviewed by: cem
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D22791
We have a couple optimizations for when the bitset is known to be just
one word. But with dynamically sized bitsets, it was actually more work
to determine the size than just to do the necessary computation. Now,
only use the optimization when the size is known to be constant.
Reviewed by: markj
Discussed with: jeff
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D22639
The _REENT_GLOBAL_STDIO_STREAMS was introduced by commit
668a4c8722 in 2017. Since then it was enabled by
default for RTEMS. Recently, the option was enabled for Cygwin which
previously used an alternative implementation to use global stdio streams.
In Newlib, the stdio streams are defined to thread-specific pointers
_reent::_stdin, _reent::_stdout and _reent::_stderr. If the option is disabled
(the default for most systems), then these pointers are initialized to
thread-specific FILE objects which use file descriptors 0, 1, and 2,
respectively. There are at least three problems with this:
(1) The thread-specific FILE objects are closed by _reclaim_reent(). This
leads to problems with language run-time libraries that provide wrappers to
the C/POSIX stdio streams (for example C++ and Ada), since they use the
thread-specific FILE objects of the initialization thread. In case the
initialization thread is deleted, then they use freed memory.
(2) Since thread-specific FILE objects are used with a common output device via
file descriptors 0, 1 and 2, the locking at FILE object level cannot ensure
atomicity of the output, e.g. a call to printf().
(3) There are resource managment issues, see:
https://sourceware.org/pipermail/newlib/2022/019558.htmlhttps://bugs.linaro.org/show_bug.cgi?id=5841
This patch enables the _REENT_GLOBAL_STDIO_STREAMS behaviour for all Newlib
configurations and removes the option. This removes a couple of #ifdef blocks.
For _REENT_GLOBAL_STDIO_STREAMS, lock/unlock all FILE objects. In the
repository, this function is only used by Cygwin during process forks. Since
Cygwin enabled _REENT_GLOBAL_STDIO_STREAMS recently, without this fix no FILE
object at all was locked.
Do not initialize __sglue with the FILE objects of _GLOBAL_REENT to avoid a
double use in the !_REENT_SMALL and !_REENT_GLOBAL_STDIO_STREAMS configurations
which didn't use a thread-specific reentrancy structure.
Remove "32" or "64" from each of the following names: acl32,
aclcheck32, aclfrommode32, aclfrompbits32, aclfromtext32, aclsort32,
acltomode32, acltopbits32, acltotext32, facl32, fchown32, fcntl64,
fstat64, _fstat64, _fstat64_r, ftruncate64, getgid32, getgrent32,
getgrgid32, getgrnam32, getgroups32, getpwuid32, getpwuid_r32,
getuid32, getuid32, initgroups32, lseek64, lstat64, mknod32, mmap64,
setegid32, seteuid32, setgid32, setgroups32, setregid32, setreuid32,
setuid32, stat64, _stat64_r, truncate64.
Remove prototypes and macro definitions of these names.
Remove "#ifndef __INSIDE_CYGWIN__" from some headers so that the new
names will be available when compiling Cygwin.
Remove aliases that are no longer needed.
Include <unistd.h> in fhandler_clipboard.cc for the declarations of
geteuid and getegid.
The __sFILE::_lock member is present if __SINGLE_THREAD__ is not defined. In
this case, it is initialized in __sfp(). It is a bug to do it sometimes also
in std().
The compiler warns the double parentheses are unnecessary in some
target, and cause fail cases when doing some testcases in regression.
gcc/testsuite/g++.dg/warn/Wstringop-overflow-6.C
Remove the unnecessary parentheses will fix it. See more details in
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=85775
Same like in commit 0542583129,
Author: Maxim Blinov <maxim.blinov@embecosm.com>
Date: Thu Jul 22 22:41:42 2021 +0100
Remove unneccesary parenthesis around declarator
Thanks for Sebastian Huber's remind!
For the exit processing only members of _GLOBAL_REENT were used by default. If
the _REENT_GLOBAL_ATEXIT option was enabled, then the data structures were
provided through dedicated global objects. Make this option the default.
Remove the option. Rename struct _reent members _atexit and _atexit0 to
_reserved_6 and _reserved_7, respectively. Provide them only if
_REENT_BACKWARD_BINARY_COMPAT is defined.
Rename struct _reent::_new::_unused members _nextf and _nmalloc to _reserved_3
and _reserved_4, respectively. Rename struct _reent::_new member _unused to
_reserved_5. Provide them only if _REENT_BACKWARD_BINARY_COMPAT is defined.
Remove unused _N_LISTS define.
Add the --enable-newlib-reent-binary-compat configure option. This option is
disabled by default. If enabled, then unused members in struct _reent are
preserved to maintain the structure layout.
Added a new global __sglue object for all configurations.
Decouples the global file object list from the _GLOBAL_REENT
structure by using this new object instead of the __sglue member
of _GLOBAL_REENT in __sfp() and _fwalk_sglue().
Replaced _fwalk_reent() with _fwalk_sglue(). The change adds an
extra __sglue object as a parameter, which will allow the passing
of a global __sglue object separate from the __sglue member of
struct _reent. The global __sglue object will be added in a
follow-on patch.
Define the configuration-dependent constant CLEANUP_FILE for use in
cleanup_stdio(). This will reduce duplicate code during the addition
of a dedicated stdio atexit handler in a follow-on patch.
Moved last remaining __sglue initializations from __sinit() to
__sfp(). The move better encapsulates access to __sglue and
facilitates its decoupling from struct _reent in a follow-on patch.
Remove __sinit_lock_acquire() and __sinit_lock_release(). Replace these with
__sfp_lock_acquire() and __sfp_lock_release(), respectively. This eliminates a
potential deadlock issue between __sinit() and __sfp(). Remove now unused
__sinit_recursive_mutex and __lock___sinit_recursive_mutex.
Added _REENT_INIT_SGLUE and _REENT_INIT_SGLUE_ZEROED macros
to initialize __sglue member of struct _reent. This allows
further simplification of __sinit() and facilitates the removal
of __sglue as a member of struct _reent for certain configurations
in a follow-on patch.
Removed duplicate sglue initializations from __sinit(). These
are already initialized in the _REENT_INIT macro in sys/reent.h.
This simplification enables the reduction of _GLOBAL_REENT
dependency in a follow-on patch.
Removed duplicate stdio initializations from __sinit(). These
are already initialized in the _REENT_INIT macro in sys/reent.h.
This simplification enables the reduction of _GLOBAL_REENT
dependency in a follow-on patch.
Unless make is invoked with V=1, have xmlto pass the parameter
'man.output.quietly=1' to xsltproc to suppress "Note: Writing foo.N"
output from the manpages stylesheet.
(This doesn't quite do what it says: The output is not silenced if V has
any value, including 0. You could consider that either a bug or a
feature.)
Simplify rules for creating docbook XML used to create manpages:
Updating the output using move-if-change and then unconditionally
touching the .stamp file doesn't make much sense.
The ndbm.c build broke with:
Commit 357d7fcc6
In <stdio.h> provide only necessary types
The above commit exposed a latent missing-header bug:
newlib/newlib/libc/include/ndbm.h:83:38: error: unknown type name ‘mode_t’
Signed-off-by: Dimitar Dimitrov <dimitar@dinux.eu>
The nano malloc build broke with:
Commit 357d7fcc6
In <stdio.h> provide only necessary types
The above commit exposed a latent missing-header bug:
newlib/libc/stdlib/nano-mallocr.c:220:33: error: ‘uintptr_t’ undeclared (first use in this function)
Fix by including <stdint.h>.
Signed-off-by: Dimitar Dimitrov <dimitar@dinux.eu>
Remove the pointer indirection through the read-only _global_impure_ptr and
directly use a externally visible _impure_data object of type struct _reent.
This enables the static initialization of global data structures in a follow up
patch. In addition, we get rid of a machine-specific file.
By including sys/_stdint.h, all types from stdint.h are
exposed even if stdint.h isn't pulled in explicitely. Include
<machine/_default_types.h instead. Fix up newlib and Cygwin
files which rely on stdint.h types, too.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- from Brian Inglis <Brian.Inglis@systematicsw.ab.ca>
- add support to _tzset_unlocked_r() to support quoting std and dst
names with angle brackets <> as per Posix
- modify documentation of tzset.c
This fixes a bug introduced in a previous patch (Commit 44b60f0c:
Make __sdidinit unused). Removed intitialization of __cleanup from
__smakebuf_r(). All callers of __smakebuf_r() call __sinit()
through the_CHECK_INIT macro, thus __cleanup is already
initialized. This fix also allows _cleanup_r() to be made static.
Changed its name to cleanup_stdio() and removed its declaration
from local.h.
Rename __sfmoreglue() in sfmoreglue() and make it static. This function is
only used by __sfp() in the same translation unit.
Remove use of register keyword.
[PATCH] newlib: Only call _fputwc_r if ELIX_LEVEL >= 4
(nano-)vfprintf.c is enabled for ELIX_LEVEL >= 1. When _WIDE_ORIENT
is set, its __sprint_r / __sfputs_r functions unconditionally called
_fputwc_r which is only in ELEX_LEVEL >= 4. With this commit,
the _WIDE support in (nano-)vfprintf.c is disabled for ELEX_LEVEL < 4.
This code has not been updated since 2016, and it looks like it has
rotted quite a bit since. It does not build against the current set
of phoenix sources -- I had to hack both the kernel headers and the
newlib headers up to get it to build, and I still have no idea if it
actually links or runs. It seems like the project itself has moved
away from newlib and to its own C library:
https://phoenix-rtos.com/documentation/libc/README.md
So since there's no interest from the phoenix folks to maintain this,
and it has a significant amount of non-standard code that we try to
keep up-to-date (without actually testing it), just punt it all.
The recent makefile reorganization broke the amdgcn port by creating
duplicate __malloc_lock symbols. This patch fixes the problem by renaming
the malloc_support.c file to mlock.c, thus overriding the default symbol
properly. Actually, I'm not sure how this ever worked?
I've had this lying around for probably a year or two at this point.
It just changes all the instance of "errno" from a common symbol to an
extern. I can't offhand recall where the actual definition is, but it
certainly exists in the generic code.
To help prevent people from missing running this script, integrate it
into the build via maintainer mode.
Also fix the inverted exit status to make this work correctly -- for
some reason, it exited 1 when it worked, and 0 when it failed.
Convert all the libc/ subdir makes into the top-level Makefile. This
allows us to build all of libc from the top Makefile without using any
recursive make calls. This is faster and avoids the funky lib.a logic
where we unpack subdir archives to repack into a single libc.a. The
machine override logic is maintained though by way of Makefile include
ordering, and source file accumulation in libc_a_SOURCES.
There's a few dummy.c files that are no longer necessary since we aren't
doing the lib.a accumulating, so punt them.
The winsup code has been pulling the internal newlib ssp library out,
but that doesn't exist anymore, so change that to pull the objects.
Rather than define per-object rules in the Makefile, have small files
that define & include the right content. This simplifies the build
rules, and makes understanding the source a little easier (imo) as it
makes all the subdirs behave the same: you have 1 source file and it
produces 1 object. It's also about the same amount of boiler plate,
without having to define custom build rules that can fall out of sync.
We also realign the free & pvalloc definitions: common code puts these
in malloc.o & valloc.o respectively, not in free.o & pvalloc.o objects.
This will also be important as we merge the libc.a build into the top
dir since it relies on a single flat list of objects for overrides.
The mallopt symbol is defined in tiny-malloc.c, not mallocr.c, but
the Makefile in here tries to compile it out of the latter. This
leads to mallopt never being defined.
The build also creates mallinfo.o & mallopt.o & mallstats.o objects
to override common ones, but the common dir doesn't use these names.
Instead, it places these all in mstats.o.
So move the build define logic to a dedicated file and compile it
directly to make things a bit simpler while fixing the missing func
and aligning objects with the cmomon code.
Rather than define per-object rules in the Makefile, have small files
that define & include the right content. This simplifies the build
rules, and makes understanding the source a little easier (imo) as it
makes all the subdirs behave the same: you have 1 source file and it
produces 1 object. It's also about the same amount of boiler plate,
without having to define custom build rules that can fall out of sync.
This will also be important as we merge the libc.a build into the top
dir since it relies on a single flat list of objects for overrides.
Also take the opportunity to clean up the unnecessary header deps in
here. Automake provides dependency generation for free now.
This file is a little confusing: it provides all of the mallocr logic,
but is compiled multiple times to produce a unique symbol each time.
For example, building mallocr.c with -DDEFINE_FREER produces freer.o
that only defines _free_r(). This is fine for most symbols, but it's
a little confusing when defining mallocr itself -- we produce a file
with the same symbol name, but we still need -DDEFINE_MALLOCR. In
order to move the logic from the build rules to source files, using
mallocr.c both as a multiplexer and for defining a single symbol is a
bit tricky. It's possible (if we add a lot of redundant preprocessor
checks to mallocr.c, or we add complicated build flags just for this
one files), but it's easier if we simply rename this to a dedicated
file. So let's do that.
We do this as a dedicated commit because the next one will create a
new mallocr.c file and git's automatic diff algorithms can handle
trivial renames, but it can't handle renames+creates in the same
commit.
Simplify the build system logic a bit by moving the mallocr.c ->
nano-mallocr.c redirection from the Makefile to the source files.
This allows for consistent object name usage regardless of the
configuration options used in case a machine dir wants to define
its own override.
Since we already set up _LIBC to indicate source files are building
for newlib, we don't need this malloc-specific symbol. Convert it
over to simplify the build a bit.
Rather than define per-object rules in the Makefile, have small files
that define & include the right content. This simplifies the build
rules, and makes understanding the source a little easier (imo) as it
makes all the subdirs behave the same: you have 1 source file and it
produces 1 object. It's also about the same amount of boiler plate,
without having to define custom build rules that can fall out of sync.
Some of these rules were already unnecessary as they were compiling a
single source file into the same named object w/out custom flags, and
Automake handles that for us completely.
This will also be important as we merge the libc.a build into the top
dir since it relies on a single flat list of objects for overrides.
Also take the opportunity to clean up the unnecessary header deps in
here. Automake provides dependency generation for free now.
This kills off the last configure script under libc/ and folds it
into the top newlib configure script. The a lot of the logic was
already in the top configure script, so move what's left into a
libc/acinclude.m4 file.
Remove dependency on __sdidinit member of struct _reent to check
object initialization. Like __sdidinit, the __cleanup member of
struct _reent is initialized in the __sinit() function. Checking
initialization against __cleanup serves the same purpose and will
reduce overhead in the __sfp() function in a follow up patch.
The crt0.o was handled in a subdir-by-subdir basis: it would be compiled
in one (e.g. libc/sys/$arch/), then copied up one level (libc/sys/), then
copied up another (libc/) before finally being copied & installed in the
top newlib dir. The libc/sys/ copy was cleaned up, and then the top dir
was changed to copy it directly out of the libc/sys/$arch/ dir. But the
libc/sys/ copy to libc/ was left behind. Clean that up now too.
These headers aren't installed, so use "" includes instead of <> so
we don't search system header paths. This matches the style used
elsewhere in the tree for these local headers, and makes it work
w/out explicit -I flags (as needed with non-recursive make).
When migrating the manual to the top-level, the include order was
sorted by name of the subdir. But this changed the chapter order
of the manual in the process. Change the sorting back to match
existing chapters and update the comments to explain.
Using xxx_LIBADD, xxx_DEPENDENCIES, and EXTRA_xxx_SOURCES is one way of
conditionally including files into a target. But it's meant more for the
cases where the variables added to LIBADD & DEPENDENCIES are constructed
via substitution (e.g. AC_SUBST) or other dynamic methods. With Automake
conditionals, then the much simpler form is to conditionally append to
the xxx_SOURCES variable and let Automake sort everything out.
The top-level newlib dir already takes care of recursing into the
sys/xxx/include/ subdirs and installing any headers found, so the
rtems subdir doesn't need to do this itself.
Replace the custom build rules (which require copying & pasting from the
current Makefile) with small stub files. This allows us to drop the rules
entirely and let Automake provide everything.
These subdirs don't actually use anything from libm. The common dir
in particular only has 4 header files, and none are included here.
The xstormy16 code has a comment mentioning why this hack is here, but
it refers to code that was removed when its configure script was merged
up a level.
This is used in a bunch of places, but nowhere is it ever set, and
nowhere can I find any documentation, nor can I find any other project
using it. So delete the flags to simplify.
These targets don't actually cross-compile -- they try to pull some
objects out of the host's /lib/libc.a, /lib/libm.a, and /lib/crt0.o
directly and merge them into newlib's own libraries. This is hard
to keep working and impossible to test. Considering the vintage of
such targets, and gcc dropping them many many years ago, drop them
from newlib too. This will make cleaning up the build a lot easier.
The machine/{configure,Makefile} files exist only to fan out to the
specific machine/$arch/ subdir. We already have all that same info
in the phoenix/ dir itself, so by moving the recursive configure and
make calls into it, we can cut off this logic entirely and save the
overhead.
These were never added to the tree, and as we transition from autoconf
to automake, it really wants the latter subdirs to always exist. These
don't, so delete the logic.
Corinna Vinschen
Matt Joyce
Sebastian Huber
Gleb Smirnoff
Konrad Sewiłło-Jopek
Alan Somers
Konstantin Belousov
Richard Scheffenegger
Mike Karels
Peter Lei
Randall Stewart
Andrew Gallatin
Roy Marples
Kristof Provost
John Baldwin
Thomas Munro
Michael Tuexen
Bjoern A. Zeeb
Alexander V. Chernikov
Alex Richardson
Brooks Davis
Conrad Meyer
Warner Losh
Andrey V. Elsukov
Ed Maste
Navdeep Parhar
Mark Johnston
Mateusz Guzik
Kyle Evans
Wei Hu
Jonathan T. Looney
Edward Tomasz Napierala
David Bright
Pedro F. Giffuni
Ken Brown
Stefan Eßer
Patrick Kelsey
Ryan Libby
D Scott Phillips
Jeff Roberson
Jeff Johnston
Jia-Wei Chen
Jon Turney
Dimitar Dimitrov
Andrea Corallo
Mike Frysinger
Andrew Stubbs
Jeff Law