_stat64 and _fstat64 are not exported from Cygwin. Use the
reentrant analogues, like everywhere else.
Signed-off-by: Corinna Vinschen <corinna-cygwin@cygwin.com>
The .init/.fini sections are not required for msp430-elf, and add unnecessary
code bloat to the CRT library. These sections are specified as "unused" by
the MSP430 EABI.
.init existed to call __crt0_run_{init,preinit}_array which run through
the functions in .{init,preinit}_array.
__crt0_run_{init,preinit}_array are already dynamically included like the
other crt0 functions, so these can be placed before the call to main,
which ensures they are still called if needed.
With these functions moved, .init has no purpose and can be removed.
.fini existed to call __crt0_run_fini_array.
However, the "__msp430_fini" symbol which marks the start of .fini has
never been used, so no termination routines have ever been run for
msp430. On returning from main(), _exit() is called which just loops
forever.
So there is no current expectation that __crt0_run_fini_array will
get called by the CRT code. Further work is to ensure functions
registered with atexit can be optionally called during program termination,
and then __crt0_run_fini_array can be registered with atexit during
program initialization.
The mechanisms for supporting the "-minrt" option have also been removed.
"-minrt" enabled a "minimum runtime environment" by removing calls to
functions which run global static initializers and constructors. Since
this behaviour is now dynamic, and these functions are only included
when needed, the minrt versions of the CRT object files are no longer
required.
Return -1 with EINVAL if pgid < 0.
Previously tcsetpgrp() would blindly go ahead and set the pgid of the
controlling terminal to a negative value, causing later calls to
various functions to fail.
For example, gdb has code like the following:
tcsetpgrp (0, getpgid (inf->pid));
If getpgid (inf->pid) fails (returns -1), then this code would set the
pgid of fd 0 to -1, so that some later calls to getpgid() would also
return -1. This caused the problem reported here:
https://cygwin.com/ml/cygwin/2019-07/msg00166.html.
SP initialization changes:
1. set default value in semihosting case as well
2. moved existing SP & SL init code for processor modes in separate routine and made it as "hook"
3. init SP for processor modes in Thumb mode as well
Add new macro FN_RETURN, FN_EH_START and FN_EH_END.
So far negative values were denoting files, positive values
denoting directories. We should prefer a less error prone
method. Redefine virtual_ftype_t to contain only positive
values and replace checks for negativ or positive values with
inline functions virt_ftype_isfile() and virt_ftype_isdir().
Drop outdcated comments referring to numerical virtual_ftype_t
values.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
commit 2607639992 "Improve error handling in /proc/[pid]/
virtual files." changed the return value of the /proc/PID
formatting functions to return -1 instead of 0 in the error
case to allow a filesize of 0.
The patch neglected to change this behaviour for /proc/PID/fd
content. This patch fixes that.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Change path_conv::is_lnk_special() so that it returns false on socket
files.
is_lnk_special() is called by rename2() in order to deal with special
files (FIFOs and symlinks, for example) whose Win32 names usually have
a ".lnk" suffix. Socket files do not fall into this category, and
this change prevents ".lnk" from being appended erroneously when such
files are renamed.
Remove a now redundant !pc.issocket() from fhandler_disk_file::link().
It is used only once, and the name is supposed to suggest "device that
is not based on the filesystem". This intended meaning is clearer if
we just replace is_auto_device() by its definition at the place where
it's used.
The sigpending mechanism failed to check if the pending signal was a
process-wide signal, or a signal for the curent thread. Fix that by
adding a matching conditional to wait_sig's __SIGPENDING code.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
So far sig_send's return type is int. The problem with this is
that sig_send returns a sigset_t on __SIGPENDING, and sigset_t
is defined as long type. So the function only returns the lower
32 bit of sigset_t, which is fine on 32 bit, but casts away the
pending RT signals on 64 bit.
Fix this by changing the return type of sig_send to sigset_t, so
as not to narrow down the sigset when returning from handling
__SIGPENDING. Make sure to cast correctly in all invocations
of sig_send.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
2019-07-09 Joern Rennecke <joern.rennecke@riscy-ip.com>
* libm/common/s_expm1.c ("math_config.h"): Include.
(expm1): Use __math_oflow to set errno.
* libm/common/s_log1p.c ("math_config.h"): Include.
(log1p): Use __math_divzero and __math_invalid to set errno.
* libm/common/sf_expm1.c ("math_config.h"): Include.
(expm1f): Use __math_oflow to set errno.
* libm/common/sf_log1p.c ("math_config.h"): Include.
(log1pf): Use __math_divzero and __math_invalid to set errno.
Have sched_getaffinity() interface like glibc's, and provide an
undocumented internal interface __sched_getaffinity_sys() like the Linux
kernel's sched_getaffinity() for benefit of taskset(1).
Update the offsets used to save registers into the stejmp jmp_buf
structure in order to:
* Avoid writing the supervision register outside the buffer and thus
clobbering something on the stack. Previously the supervision register
was written at offset 124 while the buffer was of length 124.
* Shrink the jmp_buf down to the size actually needed, by avoiding holes
at the locations of omitted registers.
Invert equality check instruction to correct the return value handling
in longjmp.
The return value should be the value of the second argument to longjmp,
unless the argument value was 0 in which case it should be 1.
Previously, longjmp would set return value 1 if the second argument was
non-zero, and 0 if it was 0, which was incorrect.
Add a function timerfd_tracker::enter_critical_section_cancelable,
which is like enter_critical_section but honors a cancel event. Call
this when a timer expires while the timerfd thread is in its inner
loop. This avoids a deadlock if timerfd_tracker::dtor has entered its
critical section and is trying to cancel the thread. See
https://cygwin.com/ml/cygwin/2019-06/msg00096.html.
GCC r272640 modifies the MSP430 target to use "__int20__" for
PTRDIFF_TYPE (and therefore INTPTR_TYPE) instead of "__int20".
To support the calculation of pointer size in
newlib/libc/include/sys/_intsup.h, definitions for __int20__ need to be
added.
This patch set implements the Linux syscalls sched_getaffinity,
sched_setaffinity, pthread_getaffinity_np, and pthread_setaffinity_np.
Linux has a straightforward view of the cpu sets used in affinity masks.
They are simply long (1024-bit) bit masks. This code emulates that view
while internally dealing with Windows' distribution of available CPUs among
processor groups.
Make it a manual reset event. It's only used once to allow a reader
to open, and there's no reason to ever reset it. Defensively set it
when a client connection is recorded, even though it should be set by
the writer that connected.
Call NtReadFile directly instead of calling fhandler_base::raw_read.
In addition to being simpler, this gives us access to the return value
from NtReadFile.
Add a method fifo_client_handler::pipe_state that queries Windows for
the state of a pipe instance. Use this to help terminate the
listen_client thread cleanly.
If the last client handler is useless, delete it instead of declaring
it invalid.
fhandler_fifo::close could be called from a signal handler or another
thread at a time when another function is holding the fifo_client
lock. This could prevent the listen_client thread from acting on the
thread termination event. Avoid a deadlock by calling
fifo_client_unlock at the beginning of fhandler_fifo::close.
libX11 provides <X11/Xlocale.h>. The build of libX11 itself adds
include/X11 to the compiler's include path. This results in a name
collision with /usr/include/xlocale.h on case-insensitive filesystems.
Commit 90e35b1eb3 renamed sys/_locale.h to xlocale.h in March 2017 under
the assumption that we should provide the locale_t type in the same file
as on Linux, FreeBSD, and Darwin.
A few weeks later (June 2017), glibc removed the xlocale.h file in favor
of bits/types/locale_t.h, which shouldn't be included directly anyway.
For reference and the reasoning, see
https://sourceware.org/git/?p=glibc.git;a=commit;h=f0be25b6336d
Given the above, revert 90e35b1eb3 and
fix additional usage of xlocale.h.
Corinna Vinschen
Jozef Lawrynowicz
Ken Brown
uchan-nos
Vaibhav Gupta
Alexander Fedotov
Corinna Vinschen
Jeff Johnston
Mark Geisert
Martin Erik Werner