everywhere. Leave some thread.cc stuff alone for now.
* cygtls.h: Kludge some definitions to avoid including a problematic windows
header.
(_cygtls::_myfault): New entry.
(_cygtls::_myfault_errno): Ditto.
(_cygtls::fault_guarded): New function.
(_cygtls::setup_fault): Ditto.
(_cygtls::return_from_fault): Ditto.
(_cygtls::clear_fault): Ditto.
(myfault): New class.
* exceptions.cc (handle_exceptions): Handle case of guarded fault in system
routine.
* gendef: Add another entry point for setjmp that the compiler doesn't know
about and won't complain about.
* gentls_offsets: Just include windows.h rather than kludging a HANDLE def.
* miscfuncs.cc (check_null_str): Delete.
(check_null_empty_str): Ditto.
(check_null_empty_str_errno): Ditto.
(check_null_str_errno): Ditto.
(__check_null_invalid_struct): Ditto.
(__check_null_invalid_struct_errno): Ditto.
(__check_invalid_read_ptr): Ditto.
(__check_invalid_read_ptr_errno): Ditto.
(dummytest): New function.
(check_iovec_for_read): Delete.
(chec_iovec): Rename from check_iovec_for_write. Take a read/write parameter.
* tlsoffsets.h: Regenerate.
* winsup.h: Remove check_* declarations.
(check_iovec_for_read): Delete declaration. Turn into a define instead.
(check_iovec_for_write): Ditto.
(check_iovec): New declaration.
* thread.h: Use ifdef guard name consistent with other header files.
* thread.h (cw_sig_wait): New enum.
(fast_mutex::lock): Use cancelable_wait with resumable signal.
(cancelable_wait): Change fourth argument to cw_sig_wait enum.
* thread.cc (cancelable_wait): Ditto. Loop on signal detection if fourth
argument == cw_sig_resume.
(__main): Don't rely on atexit to run dtors.
(do_exit): Specifically call do_global_dtors here.
(cygwin_exit): Ditto.
* dll_init.cc (dll_global_dtors): Make global. Only run dtors once.
(dll_list::init): Just set flag that dtors should be run. Don't rely on
atexit.
* dll_init.h (dll_global_dtors): Declare.
* exceptions.cc (sigrelse): Define.
* path.h (is_fs_device): New method.
(is_lnk_special): Ditto.
* fhandler_disk_file.cc (fhandler_disk_file::link): Use "is_lnk_special" rather
than "is_lnk_symlink".
* syscalls.cc (rename): Ditto.
* hookapi.cc (ld_preload): Use colon as a separator rather than space.
(wininfo::itv): Ditto.
(wininfo::start_time): Ditto.
(wininfo::window_started): Ditto.
(wininfo::getitimer): Ditto.
(wininfo::setitimer): Ditto.
(wininfo::wininfo): Ditto.
(wininfo::lock): New method.
(wininfo::release): Ditto.
* window.cc: Use new lock/acquire wininfo methods throughout.
(wininfo::wininfo): Delete
(wininfo::getitimer): Ditto.
(wininfo::setitimer): Ditto.
(getitimer): Ditto.
(setitimer): Ditto.
(ualarm): Ditto.
(alarm): Ditto.
(wininfo::lock): Define new function.
(wininfo::release): Ditto.
(wininfo::process): Delete WM_TIMER handling.
* timer.cc (struct timetracker): Delete it, flags. Add it_interval,
interval_us, sleepto_us, running, init_muto(), syncthread, and gettime().
(ttstart): Make NO_COPY.
(lock_timer_tracker): New class.
(timer_tracker::timer_tracker): Distinguish ttstart case.
(timer_tracker::~timer_tracker): New destructor. Clean out events, and reset
magic.
(timer_tracker::init_muto): New method.
(to_us): Round up as per POSIX.
(timer_thread): Reorganize to match timer_tracker::settime and
timer_tracker::gettime. Call sig_send without wait. Call auto_release.
(timer_tracker::settime): Reorganize logic to avoid race. Call gettime to
recover old value.
(timer_tracker::gettime): New method.
(timer_create): Properly set errno on invalid timerid. Use new
lock_timer_tracker method.
(timer_delete): Ditto. Simplify code slightly.
(timer_gettime): New function.
(fixup_timers_after_fork): Reinit ttstart.
(getitimer): New implementation.
(setitimer): Ditto.
(ualarm): Ditto.
(alarm): Ditto.
* cygwin.din: Export timer_gettime.
* winsup.h: Remove has has_visible_window_station declaration.
* Makefile.in (DLL_OFILES): Add lsearch.o.
* cygthread.h (cygthread::notify_detached): New element.
(cygthread::cygthread): Take optional fourth argument signifying event to
signal on thread completion.
* cygthread.cc (cygthread::stub): Signal notify_detached event, if it exists.
(cygthread::cygthread): Initialize notify_detached from fourth argument.
(cygthread::detach): Wait for notify_detached field is present.
* lsearch.cc: New file.
* search.h: Ditto.
* include/cygwin/version.h: Bump API minor number to 126.
* cygwin.din: Export lsearch, lfind.
(pinfo::exit): Move here from _pinfo::exit.
* sigproc.cc (child_info::sync): Use new function to set exitcode and
process_state.
* pinfo.cc (_pinfo::exit): Ditto.
(proc_waiter): Ditto.
(_pinfo::set_exit_state): Define new function.
(_pinfo::dup_proc_pipe): Close handle when there is no parent process around to
care about the exit value.
* dcrt0.cc (dll_crt0_0): Move subproc_ready synchronization later to make sure
that myself is still mapped in parent.
(do_exit): Reflect movement to pinfo::exit.
(__api_fatal): Ditto.
* exceptions.cc (signal_exit): Ditto.
* errno.cc (errmap): Map PROC_NOT_FOUND.
* init.cc (dll_entry): Release myself before exiting.
* sigproc.cc (proc_can_be_signalled): Set errno appropriately.
(sig_send): Ditto. Also remove ill-advised test for !myself->sendsig since
this is an indication of a process which is still initializating -- it is not
an error.
(child_info::sync): Don't set exitcode here. Assume that will happen in
proc_waiter, if necessary.
* spawn.cc (spawn_guts): Delay "wait_for_myself" logic until later. Don't wait
at all if the process has already exited. Reflect movement to pinfo::exit.
(child_info::parent_wr_proc_pipe): Eliminate.
* pinfo.h (_pinfo::alert_parent): Move here from pinfo class.
(_pinfo::dup_proc_pipe): New method.
(_pinfo::sync_proc_pipe): Ditto.
* exceptions.cc (sig_handle_tty_stop): Reflect move of alert_parent.
* init.cc (dll_entry): Exit with status one if main process called ExitProcess.
* pinfo.cc (set_myself): Remove handling of parent_wr_proc_pipe.
(_pinfo::exit): Reflect move of alert_parent. Set procinfo to NULL to flag
that we are exiting normally. Always use exitcode when exiting
(although this could be a little racy).
(pinfo::init): Set default exit to SIGTERM. This will be the exit code
reported if process is terminated.
(_pinfo::dup_proc_pipe): New function.
(pinfo::wait): Duplicate wr_proc_pipe to the right place. Use dup_proc_pipe to
move the pipe to the child.
(_pinfo::sync_proc_pipe): New function.
(_pinfo::alert_parent): Move to _pinfo. Make sure that wr_proc_pipe is ours
before using it.
* sigproc.cc (child_info::child_info): Remove handling of parent_wr_proc_pipe.
* spawn.cc (spawn_guts): Pass our wr_proc_pipe to the child when execing.
Ensure that exit code of cygwin process started from windows is correctly set.
* dcrt0.cc (dll_crt0_0): Remove hexec_proc stuff.
* fork.cc (fork_child): Remove call to pinfo_fixup_after_fork.
* pinfo.cc (set_myself): Close and zero pid_handle if set.
(pinfo_fixup_after_fork): Delete.
(proc_waiter): Don't close vchild.hProcess here. Do that when we are remove
the vchild from procs. Save hProcess as pid_handle only on first reparent
operation.
(pinfo::wait): Don't set pid_handle here.
(pinfo::alert_parent): Always try to send signal. If unsuccessful then close
and zero wr_proc_pipe.
* pinfo.h (pinfo::pinfo): Make sure that appropriate parts of the class are
zeroed on construction.
(pinfo::alert_parent): Take char argument.
(pinfo_fixup_after_fork): Delete declaration.
(hexec_proc): Ditto.
* sigproc.cc (remove_proc): Close pid_handle and hProcess if appropriate.
* spawn.cc (spawn_guts): Set cygheap->pid_handle on first exec.
* cygheap.h (init_cygheap::pid_handle): New element.
* pinfo.cc (set_myself): Clear previously existing cygheap->pid_handle when a
new process has been started.
(pinfo::wait): Make sure that a handle to the newly forked/spawned process is
kept around so that the pid will not be reused.
* pinfo.h (_pinfo::pid_handle): Move.
(pinfo::pid_handle): to here.
* spawn.cc (spawn_guts): Create a pid_handle in cygheap prior to spawning to
ensure that the pid does not get reused during the lifetime of the "cygwin
pid".
* pinfo.h (pinfo::alert_parent): New function.
* exceptions.cc (sig_handle_tty_stop): Use alert_parent to send "signals" to
parent.
* fork.cc (fork_parent): Don't close pi.hProcess. Let the waiter thread do
that.
* pinfo.cc (proc_waiter): Detect case where process exits without setting the
exit code and use value from GetExitCodeProcess. Reluctantly implement
__SIGREPARENT.
(pinfo::alert_parent): Define.
* sigproc.h (__SIGREPARENT): New enum.
* spawn.cc (spawn_guts): Send reparent signal to parent on exec. Always create
process in suspended state to avoid races. Remove cygthread.h in favor of
cygtls.h throughout since cygtls now includes cygthread.h. Eliminate
ppid_handle usage throughout.
* child_info.h: Regenerate magic number
(child_info): Remove pppid_handle.
* cygthread.h (cygthread::release): New method. Frees thread without waiting.
* cygthread.cc (cygthread::stub): Set _ctinfo in _mytls to point to information
for executing thread. Don't call SetEvent if thread is no longer in use.
(cygthread::simplestub): Ditto.
* cygtls.h (_cygtls::_ctinfo): New element contains pointer to information
about executing cygthread, if any.
* dcrt0.cc: Remove last vestiges of per_thread stuff.
(dll_crt0_0): Ditto. Remove accommodation for ppid_handle.
(do_exit): Remove obsolete reparenting test.
(_exit): Exit with a more SUSv3-like exit value.
* dtable.cc (dtable::stdio_init): Check for myself->cygstarted rather than
myself->ppid_handle to see if we were started by a cygwin process.
* exceptions.cc (open_stackdumpfile): Ditto.
(handle_exceptions): Ditto.
(ctrl_c_handler): Ditto.
(sig_handle_tty_stop): Ditto. Let parent send signal to itself on STOP.
(sigpacket::process): Comment out vfork test.
(signal_exit): Use more SUSv3-like exit value on signal.
* external.cc (fillout_pinfo): Don't set hProcess.
* fork.cc: Remove VFORK cruft.
(per_thread::set): Delete.
(fork_child): Remove perthread stuff.
(fork_parent): Remove obsolete subproc_init. Accommodate new method for
tracking subprocesses.
* pinfo.cc (set_myself): Accommodate new pinfo/_pinfo layout. Set some things
here that used to be set in wait_sig.
(_pinfo::exit): Set exitcode here. Close process pipe.
(_pinfo::commune_send): Accommodeate new pinfo/_pinfo layout.
(proc_waiter): New function. Waits, in a thread for subprocess to go away.
(pinfo::wait): New function. Initialization for proc_waiter.
* pinfo.h (_pinfo::exitcode): New element.
(_pinfo::cygstarted): Ditto.
(_pinfo::wr_proc_pipe): Ditto.
(_pinfo::ppid_handle): Delete.
(_pinfo::hProcess): Delete.
(_pinfo::lock): Delete.
(pinfo::hProcess): New element.
(pinfo::lock): Ditto.
(pinfo::wait): Declare new function.
(pinfo::preserve): Define new function.
* sigproc.cc: Remove old stuff from wait_subproc thread based method.
(zombies): Remove.
(procs): New.
(my_parent_is_alive): Just check that the parent pid exists.
(mychild): Just use pinfo methods to determine if child is mine.
(proc_subproc): Revamp PROC_ADDCHILD to use pinfo::wait. Remove
PROC_CHILDTERMINATED logic. Use different method to remove processes from list
when SIGCHLD == SIG_IGN.
(proc_terminate): Gut.
(subproc_init): Delete.
(init_child_info): Remove setting of pppid_handle.
(checkstate): Revamp to only scan procs array.
(remove_proc): Rename from remove_zombie. Don't close hProcess or pid_handle.
Don't release memory if it's myself.
(stopped_or_terminated): Change logic to handle new consolidated proc/zombie
array.
(wait_subproc): Delete.
* sigproc.h: Remove obsolete EXIT_* defines.
(subproc_init): Remove declaration.
* spawn.cc (spawn_guts): Remove reparenting stuff. Use standard wait logic to
wait for child if started from a non-cygwin process.
* tlsoffsets.h: Regenerate.
* tty.cc (tty_init): Check for myself->cygstarted rather than
myself->ppid_handle to see if we were started by a cygwin process.
* include/sys/signal.h (external_pinfo::exitcode): Replace hProcess.
* include/sys/wait.h (WCOREDUMP): Define.
* fhandler_tty.cc (fhandler_tty_slave::read): Add debugging output for timeout
case.
* signal.cc (abort): Flag that we are exiting with the ABORT signal.
starting.
* child_info.h (init_child_info): Remove pid argument from declaration.
* cygheap.h (init_cygheap::pid): New element.
* dcrt0.cc (dll_crt0_0): Eliminate handling of now-noexistent cygpid parameter
in child_info struct. Set forkee to 'true' rather than cygpid since the pid
value was never used.
(dll_crt0_1): Ditto.
(_dll_crt0): Ditto.
* fork.cc (fork_child): Don't wait for sigthread. This is handled in the fork
call now.
(fork_parent): Remove obsolete pid argument from init_child_info call. Don't
do anything special with cygpid when DEBUGGING.
(fork): Delay all signals during fork.
(fork_init): Don't do anything special when DEBUGGING.
* pinfo.cc (set_myself): Remove pid parameter. Use new pid field in cygheap.
(pinfo_init): Don't pass pid argument to set_myself.
* sigproc.cc (sig_send): Wait for dwProcessId to be non-zero as well as
sendsig.
(init_child_info): Eliminate handling of pid.
(wait_sig): Implement method to temporarily hold off sending signals.
* sigproc.h (__SIGHOLD): New enum.
(__SIGNOHOLD): Ditto.
* spawn.cc (spawn_guts): Remove obsolete pid argument from init_child_info
call.
* tty.h (tty_list::allocate_tty): Turn argument into a boolean.
* tty.cc (tty_list::init): Protect entire allocation operation with tty_mutex
(formerly title_mutex) to protect against allocation races.
(_cygtls::wq): Declare.
* cygtls.cc (_cygtls::fixup_after_fork): Clear wq.thread_ev to avoid using an
invalid event handle in forked process.
* dcrt0.cc (waitq_storage): Delete.
(threadstuff): Remove waitq_storage.
* perthread.h (per_thread_waitq): Delete.
(waitq_storage): Delete declaration.
* sigproc.cc (sigproc_init): Remove perthread waitq consideration.
* sigproc.h (waitq): Delete declaration.
* wait.cc (wait4): Use _my_tls waitq structure rather than per_thread.
* cygtls.h (_cygtls::newmask): Delete member.
(_cygtls::deltamask): New member.
* gendef (_sigdelayed): Replace the call to set_process_mask by a call to
set_process_mask_delta.
* exceptions.cc (handle_sigsuspend): Do not filter tempmask. Or
SIG_NONMASKABLE in deltamask as a flag.
(_cygtls::interrupt_setup): Set deltamask only.
(set_process_mask_delta): New function.
(_cygtls::call_signal_handler): Replace the first call to set_process_mask by a
call to set_process_mask_delta.
* tlsoffsets.h: Regenerate.
* exceptions.cc: Remove some __I386__ conditionals.
(handle_exceptions): Move ppid test to outside of a loop for efficiency.
(setup_handler): Make debugging output more wordy.
(_cygtls::call_signal_handler): To avoid a race, use lock/unlock to synchronize
with signal thread and ensure that signal_arrived event has actually been set.
* gendef (_sigfe): Use ebx for all sigstack manipulations to ensure that the
register is saved. Move setting of incyg to within stack lock to avoid
setup_handler confusion.
(_sigbe): Use ebx for all sigstack manipulations to ensure that the register is
saved.
(_cygtls::pop): Ditto.
(_cygtls::lock): Ditto.
(stabilize_sig_stack): Ditto.
(setjmp): Ditto.
(longjmp): Ditto.
function, in an exception, spinning, or locked.
* gendef (_sigfe): Move incyg setting earlier.
(sigreturn): Set incyg flag to avoid interrupting called cygwin functions.
(sigdelayed): Ditto.
(stabilize_sig_stack): Ditto.
* sigproc.cc (proc_subproc): Don't restore process lock early in exec case.
* cygtls.h: Reorganize fields in _cygtls slightly.
* tlsoffsets.h: Regenerate.
could conceivably exit before function returns, rendering the child's shared
memory area invalid.
* cygtls.h (_cygtls::incyg): Declare new field.
(_cygtls::in_exception): Define new function.
* exceptions.cc (setup_handler): Remove locked flag. Use 'incyg' flag and
in_exception function to determine when we're in a cygwin function.
(_cygtls::call_signal_handler): Decrement incyg flag prior to calling a
handler. Increment it on return.
* gendef (_sigfe): Increment incyg flag. Use testl for zero testing rather
than orl, for consistency.
(_sigbe): Decrement incyg flag. Use testl for zero testing rather than orl,
for consistency.
(_cygtls::pop): Use testl for zero testing rather than orl, for consistency.
(stabilize_sig_stack): Ditto.
to force signal to be handled. Zero event here to prevent races.
* signal.cc (sigwaitinfo): Use local handle value for everything since signal
thread could zero event element at any time. Detect when awaking due to thread
not in mask and set return value and errno accordingly. Don't set signal
number to zero unless we've recognized the signal.
* sigproc.cc (sigq): Rename from sigqueue throughout.
* thread.cc (pthread::join): Handle signals received while waiting for thread
to terminate.
* cygwin.din: Export sighold, sigqueue.
* exceptions.cc (sighold): Define new function.
* signal.cc (handle_sigprocmask): Set correct errno for invalid signal.
Simplify debugging output.
(sigqueue): Define new function.
* include/cygwin/signal.h (sighold): Declare new function.
(sigqueue): Ditto.
* include/cygwin/version.h: Bump API minor version number.
* include/limits.h (TIMER_MAX): Define.
(_POSIX_TIMER_MAX): Ditto.
(sigfe.s): Ensure that sigfe.s will be regenerated if it does not exist.
* dll_init.cc (dll_dllcrt0): Simplify initializing tests.
* exceptions.cc (setup_handler): Detect when stub caller is either spinning or
has acquired the lock after being suspended to avoid windows problems with
suspending a win32 API call.
* cygtls.h (_cygtls::spinning): Declare new element.
* gendef: Remove unused _siglist_index and _siglist declaration.
(_sigfe): Set spinning element when potentially looping, waiting for lock.
(_sigbe): Ditto.
(_cygtls::lock): Ditto.
(_longjmp): Ditto.
* tlsoffsets.h: Regenerate.
* pinfo.cc (_pinfo::exit): Set final exit state here. Call sigproc_terminate
if invoked with 'norecord'. Clear any residual _cygtls stuff.
* winsup.h (exit_states): Define ES_FINAL.
* spawn.cc (spawn_guts): Don't call proc_terminate specifically when execing.
Let _pinfo::exit handle that case.
* sigproc.cc (wait_subproc): Always exit loop early when proc_loop_wait.
* init.cc (munge_threadfunc): Eliminate unused argument.
(dll_entry): Reflect above change in call to munge_threadfunc.
* cygtls.h (_cygtls::call_signal_handler): Rename from call_signal_handler_now.
(_cygtls::push): Make second argument mandatory.
(_cygtls::fixup_after_fork): Declare new function.
(_cygtls::lock): Ditto.
* cygtls.cc (_cygtls::fixup_after_fork): Define new function.
* dcrt0.cc (cygwin_finished_initializing): Define as bool.
(alloc_stack): Use _tlstop rather than arbitrary variable in probably vain
attempt to avoid strange fork problem on CTRL-C.
(dll_crt0_0): Remove obsolete winpids::init call.
* dll_init.cc (dll_dllcrt0): Detect forkee condition as equivalent to
initializing.
* winsup.h (cygwin_finished_initializing): Declare as bool.
* exceptions.cc (handle_exceptions): Rely on cygwin_finished_initializing to
determine how to handle exception during process startup.
(_cygtls::call_signal_handler): Rename from call_signal_handler_now.
(_cygtls::interrupt_now): Fill in second argument to push.
(signal_fixup_after_fork): Eliminate.
(setup_handler): Initialize locked to avoid potential inappropriate unlock.
Resume thread if it has acquired the stack lock.
(ctrl_c_handler): Just exit if ctrl-c is hit before cygiwn has finished
initializing.
* fork.cc (sync_with_child): Don't call abort since it can cause exit
deadlocks.
(sync_with_child): Change debugging output slightly.
(fork_child): Set cygwin_finished_initializing here. Call _cygtls fork fixup
and explicitly call sigproc_init.
(fork_parent): Release malloc lock on fork failure.
(vfork): Call signal handler via _my_tls.
* sigproc.cc (sig_send): Ditto.
* syscalls.cc (readv): Ditto.
* termios.cc (tcsetattr): Ditto.
* wait.cc (wait4): Ditto.
* signal.cc (nanosleep): Ditto.
(abort): Ditto.
(kill_pgrp): Avoid killing self if exiting.
* sync.cc (muto::acquire): Remove (temporarily?) ill-advised exiting_thread
check.
* gendef (_sigfe): Be more agressive in protecting stack pointer from other
access by signal thread.
(_cygtls::locked): Define new function.
(_sigbe): Ditto.
(_cygtls::pop): Protect edx.
(_cygtls::lock): Use guaranteed method to set eax to 1.
(longjmp): Aggressively protect signal stack.
* miscfuncs.cc (low_priority_sleep): Reduce "sleep time" for secs == 0.
* pinfo.cc (winpids::set): Counterintuitively use malloc's lock to protect
simultaneous access to the pids list since there are pathological conditions
which can cause malloc to call winpid.
(winpids::init): Eliminate.
* pinfo.h (winpids::cs): Eliminate declaration.
* pinfo.h (winpids::init): Eliminate definition.
* Makefile.in: Make version.h/cygwin.din version check a warning since it is
not foolproof.
* cygheap.h (CYGHEAPSIZE): Bump size down.
* cygtls.h (_threadinfo::stacklock): New element.
(_threadinfo::pop): Make regparm.
(_threadinfo::lock): New function.
(_threadinfo::unlock): New function.
* cygtls.cc (_threadinfo::push): Wait for a lock on the stack before performing
the operation.
(_threadinfo::pop): Move to another file.
* cygwin.din: More SIGFE changes.
* exceptions.cc (try_to_debug): Always display messages on console.
(handle_exceptions): Unwind stack only when actually about to call sig_send.
(setup_handler): Lock stack prior to performing any operations.
* gendef (_sigfe): Ditto.
(_sigbe): Ditto.
(_threadinfo::pop): Ditto. Move here.
* gen_tlsoffsets: Generate positive offsets.
* tlsoffsets.h: Regenerate.
version.
* debug.cc (__set_errno): Ditto.
* exceptions.cc (handle_sigsuspend): Remove spurious sig_dispatch_pending call.
(set_signal_mask): When there seem to be pending signals to dispatch, tell
signal_dispatch_pending/sig_send not to specifically call any handlers.
* sigproc.h (sig_dispatch_pending): Change declaration to void.
* sigproc.cc (sig_dispatch_pending): Change definition to void. Take an
argument to determine whether to tell sig_send to wait for handler to be
called.
* sigproc.cc (sig_send): Don't call signal handler when sig == __SIGFLUSHFAST.
(wait_sig): Honor __SIGFLUSHFAST. Guard against sigpacket::process nuking
si_signo.
* sigproc.h (__SIGFLUSHFAST): Define new special signal.
(sig_dispatch_pending): Change declaration to void. Take optional boolean
argument.
* fork.cc (vfork): Add debugging output.
signal_arrived and for sigCONT.
(sigpacket::process): Enforce sending of both signal_arrived and sigCONT, where
appropriate.
* gendef (sigreturn): Save tls pointer in ebx so that it can jump into
sigdelayed and use the same register.
initialization.
* dcrt0.cc (initial_env): Can it really be true that XP doesn't allow attaching
a debugger during DLL attach? Add temporary workaround.
(dll_crt0_0): Ensure that _impure_ptr stdio is initialized before any threads.
(dll_crt0_1): Move _impure_ptr initialization to dll_crt0_0.
* exceptions.cc (try_to_debug): Reinstate old method for looping while
debugging.
* syscalls.cc (_cygwin_istext_for_stdio): Regularize debugging output. Remove
hopefully extraneous check.
(setmode_helper): Add debugging output for improbable case. Use "binary"
rather "raw" for consistency.
* exceptions.cc (setup_handler): Improve debugging output.
(call_signal_handler_now): Remove ill-advised debugger call.
* sigproc.cc (sigcomplete_main): Delete.
(sig_send): Honor FIXME and avoid using main thread's completion event for
everything or suffer races.
(pending_signals::add): Default stored mask to current process mask rather than
mask at time of signal send.
(wait_sig): Add debugging output.
* sigproc.h (sigpacket::mask_storage): Delete.
* cygwin.din: Make clock SIGFE. Add clock_gettime, sigwaitinfo, timer_create,
timer_delete, timer_settime.
* include/cygwin/version.h: Reflect above additions.
* fork.cc (fork_child): Call fixup_timers_after_fork.
* signal.cc (sigwait): Remove unused variable.
* timer.cc: New file.
(clock_gettime): Define new function.
(timer_tracker): Define new struct used by timer functions.
(timer_tracker::timer_tracker): New function.
(to_us): New function.
(timer_thread): New function.
(timer_tracker::settime): New function.
(timer_create): New function.
(timer_settime): New function.
(timer_delete): New function.
(fixup_timers_after_fork): New function.
* cygthread.cc: Bump thread count.
* signal.cc (sigwaitinfo): Define new function.
(sigwait): Redefine based on sigwaitinfo.
* include/cygwin/signal.h (sigwaitinfo): Declare.
(sigwait): Ditto.
* dtable.cc (dtable::vfork_parent_restore): Avoid double close of ctty when
ctty == ctty_on_hold.
* cygtls.h (_threadinfo::threadkill): New element.
(_threadinfo::set_threadkill): Declare new function.
(_threadinfo::reset_threadkill): Declare new function.
* dcrt0.cc (dcrt0_1): Call here so that it will be possible to attach to
running process with #(*& Windows Me/9x.
(initial_env): Try to initialize strace if uninitialized.
* gendef: Don't zero signal if threadkill is set since that will happen in the
called function.
* signal.cc (sigwait): Ensure cleanup in error conditions.
* sigproc.cc (sig_send): Clear packet mask storage.
(wait_subproc): Fill in child exit code in siginfo_t structure.
* thread.cc (pthread_kill): Set threadkill flag.
* tlsoffsets.h: Regenerate. Throughout, use siginfo_t to fill out all signal
information for "kernel" signals.
* cygtls.h (_threadinfo::set_siginfo): Declare new function.
* cygtls.cc (_threadinfo::set_siginfo): Define new function.
* dcrt0.cc (do_exit): Accommodate siginfo_t considerations.
* exceptions.cc (handle_exceptions): Ditto.
(sig_handle_tty_stop): Ditto.
(ctrl_c_handler): Use killsys() to send signal.
(sigpacket::process): Rename from sig_handle. Use siginfo_t field from
sigpacket for everything.
(tty_min::kill_pgrp): Accommodate siginfo_t considerations.
(fhandler_termios::bg_check): Ditto.
* fhandler_tty.cc (fhandler_tty_slave::ioctl): Use killsys() to send signal.
* signal.cc (kill_worker): Rewrite to use siginfo_t second argument.
(kill_pgrp): Ditto.
(kill0): Define new function pulled from kill().
(kill): Rewrite as frontend to kill0.
(killsys): Define new function.
* sigproc.cc (sigelem): Eliminate.
(sigpacket): Move to sigproc.h. Subsume sigelem.
(pending_signals): Use sigpacket rather than sigelem for everything.
(sig_clear): Ditto.
(wait_sig): Ditto.
(sig_send): Rewrite to use siginfo_t argument.
(sig_send): New function wratpper to sig_send with siginfo_t argument.
(wait_subproc): Accommodate siginfo_t considerations.
* thread.cc (pthread_kill): Ditto.
* sigproc.h (sigpacket): Move here.
(sigpacket::process): Declare "new" function.
(sig_handle): Eliminate declaration.
(sig_send): Declare with new paramaters.
(killsys): Declare new function.
(kill_pgrp): Declare.
* winsup.h: Move some signal-specific stuff to sigproc.h.
* include/cygwin/signal.h: Tweak some siginfo_t stuff.
compiler bug.
* autoload.cc (TryEnterCriticalSection): Remove.
* dcrt0.cc (dll_crt0_0): Delete inappropriate setting of _my_tls.stackptr to
NULL since it has really bad consequences. Make 'si' an automatic variable.
* cygtls.cc (_threadinfo::init_thread): Correct thinko which caused thread list
to be allocated every time.
* cygtls.h (CYGTLS_PADSIZE): Define as const int.
* sync.h: Make multiple inclusion safe.
(muto::next): Eliminate.
(muto::exiting_thread): New variable.
(muto::set_exiting_thread): New function.
(new_muto): Change to use different section for mutos since c++ give
inexplicable warning in some cases otherwise.
(new_muto1): Ditto.
* dcrt0.cc (do_exit): Call muto::set_exiting_thread here.
* sync.cc (muto_start): Eliminate.
(muto::acquire): Always give exiting thread a lock. Never give thread a lock
if exiting.
(muto::release): Ditto for releasing.
* dtable.cc (dtable::init_lock): Unline function and define here.
* dtable.h (lock_cs): Define as a muto since critical sections seem to work
oddly on Windows Me.
(lock): Accommodate switch to muto.
(unlock): Ditto.
* exceptions.cc (setup_handler): Don't worry about acquiring mutos since that
hasn't mattered for a long time.
(signal_exit): Ditto: muto stuff will be handled automatically on exit now.
* Makefile.in (DLL_IMPORTS): Link advapi32 to ensure proper DLL initialization.
* autoload.cc (RegCloseKey): Arbitrarily choose this function as a "seed" to
pull the advapi32 link library in. So, comment out the autoloading.
* cygtls.cc (_threadinfo::init_thread): Just clear CYGTLS_PADSIZE.
(_threadinfo::remove): Add debugging.
(_threadinfo::find_tls): Ditto.
* cygtls.h (_threadinfo::padding): Make zero length (for now?).
* dcrt0.cc (dll_crt0_0): Move more initialization here from dll_crt0_1.
(dll_crt0_1): See above.
* dtable.h (dtable::lock): Remove commented out critical section locking.
* dtable.h (dtable::init_lock): Remove commented out critical section locking.
* dtable.h (dtable::unlock): Remove commented out critical section locking.
* exceptions.cc (interruptible): bool'ize.
* init.cc (threadfunc_fe): Revert to storing threadfunc at stack bottom.
(munge_threadfunc): Ditto. Avoid adding overhead to calibration_thread.
(prime_threads): Don't initialize tls stuff.
(dll_entry): Make minor change to initialization order.
* tlsoffsets.h: Regenerate.
* sigproc.cc (wait_sig): Add sanity check for end of process thread exit.
* select.h: Make minor formatting change.
* Makefile.in: Add still more -fomit-frame-pointer functions.
* dtable.h (dtable::lock): New function.
(dtable::unlock): New function.
(dtable::init_lock): New function.
* cygheap.h (HEAP_TLS): Declare new enum value.
(init_cygheap::threadlist): Declare new array.
(init_cygheap::sthreads): Declare new variable.
(cygheap_fdmanip::~cygheap_fdmanip): Use new dtable lock/unlock functions.
(cygheap_fdnew::cygheap_fdnew): Ditto.
(cygheap_fdget::cygheap_fdget): Ditto.
* dtable.cc (dtable_init): Initialize fdtab critical section.
(dtable::fixup_after_fork): Ditto.
(dtable::fixup_after_exec): Ditto.
(dtable::dup2): Use lock/unlock calls to protect access to fdtab.
(dtable::find_fifo): Ditto.
(dtable::fixup_before_fork): Ditto.
(dtable::fixup_before_exec): Ditto.
(dtable::set_file_pointers_for_exec): Ditto.
(dtable::vfork_child_dup): Ditto.
(dtable::vfork_parent_restore): Ditto.
* syscalls.cc (close_all_files): Ditto.
* sync.h (muto::acquired): Declare new function.
(new_muto1): Declare new macro used to specify name of muto storage.
* sync.cc (muto::acquired): Define new function.
* cygthread.cc (cygthread::stub): Remove signal chain removal call since it is
handled during initialization now.
* cygthread.cc (cygthread::simplestub): Remove signal chain removal call since
it is handled during initialization now.
* cygtls.cc (sentry): New class used for locking. Use throughout.
(_threadinfo::reset_exception): Don't pop stack.
(_threadinfo::find_tls): Move from exceptions.cc.
(_threadinfo::init_thread): Initialize array of threads rather than linked
list. Take second argument indicating thread function for this thread.
(_threadinfo::remove): Search thread array rather than linked list. Use sentry
to lock. Only unlock if we got the lock.
(_threadinfo::find_tls): Ditto for first two.
(handle_threadlist_exception): Handle exceptions when manipulating the thread
list in case of premature thread termination.
(_threadinfo::init_threadlist_exceptions): Ditto.
* cygtls.h (TLS_STACK_SIZE): Decrease size.
(_threadinfo::padding): Add element to avoid overwriting lower part of stack.
(_threadinfo::remove): Add a "wait" argument to control how long we wait for a
lock before removing.
* exceptions.cc (init_exception_handler): Make global. Take argument to
control exception handler being set.
(ctrl_c_handler): Wait forever when removing self from signal chain.
(_threadinfo::find_tls): Move to cygtls.cc.
(sig_handle): Reorganize detection for thread-specific signals.
* heap.cc (heap_init): Rework slightly. Make fatal error more verbose. Remove
malloc initialization since it can't happen during dll attach.
* init.cc (search_for): Move address to search for on stack here.
(threadfunc_ix): Ditto for stack offset. Make shared so that stack walk
potentially only has to be done once when cygwin processes are running.
(threadfunc_fe): Use standard tls to store thread function (may change back
later).
(calibration_thread): New function. Potentially called to find threadfunc_ix.
(munge_threadfunc): Search for "search_for" value on stack. Output warning
when thread func not found on stack. Use standard tls to store thread
function.
(prime_threads): New function. Called to prime thread front end.
(dll_entry): Call dll_crt0_0 here when DLL_PROCESS_ATTACH. Call prime_threads
here. Try to remove thread from signal list here.
* sigproc.cc (wait_sig): Initialize threadlist exception stuff here.
* thread.cc (pthread::exit): Pass argument to signal list remove function.
* thread.h: Remove obsolete *ResourceLock defines.
* tlsoffsets.h: Regenerate.
* winsup.h (spf): Define temporary debug macro to be deleted later.
* dcrt0.cc (dll_crt0_0): New function, called during DLL initialization.
Mainly consists of code pulled from dll_crt0_1.
(dll_crt0_1): See above.
(_dll_crt0): Wait for initial calibration thread to complete, if appropriate.
Move some stuff to dll_crt0_0.
(initialize_main_tls): Accommodate argument change to
_thread_info::init_thread.
* fork.cc (fork_child): Ditto.
(sync_with_child): Fix debug message.
* external.cc (cygwin_internal): Remove special considerations for
uninitialized dll since initialization happens during dll attach now.
* dlfcn.cc (dlopen): Remove obsolete *ResourceLock calls.
(dlclose): Ditto.
* cygheap.h (init_cygheap::close_ctty): Declare new function.
* cygheap.cc (init_cygheap::close_ctty): Define new function.
* syscalls.cc (close_all_files): Use close_ctty.
(setsid): Ditto.
* cygthread.cc (cygthread::stub): Remove exception initialization.
* cygthread.cc (cygthread::stub): Remove exception initialization.
(cygthread::simplestub): Ditto.
* thread.cc (pthread::thread_init_wrapper): Ditto.
* cygtls.cc (_last_thread): Make static.
(_threadinfo::call2): Initialize exception handler here.
(_threadinfo::find_tls): Move here.
* exceptions.cc (_threadinfo::find_tls): Move.
* dcrt0.cc (__api_fatal): Add prefix info to message here rather than including
it in every call to function.
* winsup.h (api_fatal): Accommodate above change.
* debug.cc (add_handle): Don't do anything if cygheap not around.
(mark_closed): Ditto.
* dll_init.cc (dll_list::detach): Fix debug output.
* fork.cc (sync_with_child): Ditto.
(vfork): Improve debug output.
* heap.cc (heap_init): Ditto.
* exceptions.cc (try_to_debug): Clarify message when debugger attaches.
environment variable after error_start detected.
* fhandler_tty_slave.cc (fhandler_tty_slave::close): Clarify debug message.
* syscalls.cc (setsid): Don't increment usecount here, since it will be
automatically decremented on close.
calculated mask in debugging output.
* sigproc.h (set_signal_mask): Reflect above change in declaration.
* path.cc (mount_item::build_win32): Take path apart before feeding it to
fnmunge. Throughout, change use of _reent_winsup()-> to _my_tls.locals.
instead. Throughout, remove obsolete MT_SAFE/_CYG_THREAD_FAILSAFE
considerations. Througout, add cygtls.h include.
* Makefile.in (DLL_OFILES): Add cygtls.o. Add some more objects to the
-fomit-frame-pointer list.
* acconfig.h: Remove obsolete settings.
* config.h.in: Ditto.
* bsdlib.cc: Add cygtls.h include.
* configure.in: Remove --enable-extra-threadsafe-checking.
* configure: Regenerate.
* cygtls.h (_local_storage): New struct renamed from _winsup_t (sic).
(_threadinfo:local_clib): Add new field.
(_threadinfo::locals): Ditto.
(_threadinfo::init_thread): Accept second _reent * argument.
(_threadinfo::call): Define as regparm.
(CYGTLS_PADSIZE): Remove unnecessary slop.
(_getreent): Define as a macro.
* thread.h: Remove _CYG_THREAD_FAILSAFE and MT_SAFE stuff.
(_winsup_t): Move to cygtls.h.
(ResourceLocks::ResourceLocks): Eliminate empty constructor.
(MTinterface::reents): Eliminate.
(MTinterface::thread_self_key): Eliminate.
(MTinterface::MTinterface): Eliminate.
* dcrt0.cc: Include stdio.h for _impure_ptr initialization.
(do_global_ctors): Remove run_ctors_p (sic) considerations. Don't call atexit
here.
(__main): Initialize destructors for user here.
(dll_crt0_1): Accept a dummy argument. Don't call init_thread here. Don't set
_impure_ptr here. Call do_global_ctors after more things have been
initialized.
(_dll_crt0): Define zeros buffer as max of needed size of CYGTLS_PADSIZE so
that it can be used for two purposes while minimizing stack usage. Initialize
_impure_ptr specifically, for speed. Call dll_crt0_1 with buffer argument.
(cygwin_dll_init): Call dll_crt0_1 with dummy argument.
* dtable.cc (dtable::find_unused_handle): Remove call to AssertResourceOwner.
* exceptions.cc: Move _threadinfo stuff to new file.
* cygtls.cc: New file.
* gentls_offsets: Accommodate increasing complexity of cygtls.h.
* hires.h (hires_base::~hires_base): Remove.
* init.cc (dll_entry): Remove setting of reents.
* thread.cc: Remove syslog.h include.
(__getreent): Simplify to use _my_tls.
(_reent_winsup): Delete.
(AssertResourceOwner): Delete.
(MTinterface::Init): Remove setting of _clib and _winsup, with all that
entails.
(MTinterface::fixup_after_fork): Ditto.
(pthread::thread_init_wrapper): Ditto. Also remove call to
set_tls_self_pointer.
(pthread::set_tls_self_pointer): Eliminate.
(pthread::get_tls_self_pointer): Just return _my_tls.tid;
(__reent_t::init_clib): Eliminate.
* tlsoffsets.h: Regenerate.
getsigmask.
* fhandler.h (fhandler_base): Make friends with close_all_files.
* pinfo.cc (_pinfo::set_ctty): Add more debugging.
* sigproc.cc (proc_can_be_signalled): Detect state when signal handler thread
is gone in target process as an EPERM situation. Set errno to ESRCH if process
doesn't exist.
(sigproc_terminate): Set sendsig to illegal value when closed.
(sig_send): Rely on proc_can_be_signalled setting the proper errno.
* syscalls.cc (close_all_files): Detect when all ttys are closed prior to
calling close_all_files. The ctty needs to be closed explicitly in this case.
cygthread::stub2. Just return from function now since ExitThread is guaranteed
by automatic _threadinfo wrapper. Define as per ThreadProc convention.
(cygthread::stub2): Remove.
(cygthread::simplestub): Perform similar operations to cygthread::stub.
(cygthread::simplestub2): Remove.
* cygthread.h (cygthread::stub): Declare as per ThreadProc convention.
(cygthread::stub2): Remove declaration.
(cygthread::simplestub): Declare as per ThreadProc convention.
(cygthread::simplestub2): Remove declaration.
* cygtls.h (_threadinfo::call): Define first argument as per ThreadProc
convention.
(_threadinfo::call2): Ditto.
(_tlsbase): Define as char * pointer.
(_tlstop): New definition.
(_main_tls): Define here.
* dcrt0.cc (alloc_stack): Revert previous change which called init_thread since
information would be overwritten by fork later anyway.
(dll_crt0_1): Use _tlsbase and _tlstop for setting stack bottom, top.
* exceptions.cc: Move _main_tls declaration to cygtls.h.
(_threadinfo::call): Define first argument as per ThreadProc convention.
(_threadinfo::call2): Call ExitThread with thread function return value.
(_threadinfo::init_thread): Don't initialize cygtls to zero if input arg is
NULL.
* fork.cc (fork_child): Reset _main_tls here. Reinitialize parts of _my_tls
after copying data from parent.
* init.cc (threadfunc_fe): New function. Front-end for all threads created in
cygwin processes.
(munge_threadfunc): New function.
(dll_entry): Call munge_threadfunc to force the call of a thread wrapper.
* thread.cc (pthread::thread_init_wrapper): Perform similar operations to
cygthread::stub.
(pthread::thread_init_wrapper2): Remove.
* thread.h (pthread::thread_init_wrapper): Declare as per ThreadProc
convention.
(pthread::thread_init_wrapper2): Remove declaration.
* window.cc (Winmain): Just return from function now since ExitThread is
guaranteed by automatic _threadinfo wrapper.
(_threadinfo::init_thread): Rename from 'init'.
(_threadinfo::init): Declare new function.
(_threadinfo::protect_linked_list): Declare new critical section.
* dcrt0.cc (dll_crt0_1): Call init_thread to initialize thread stuff.
(_dll_crt0): Call _threadinfo::init prior to invoking dll_crt0_1.
* exceptions.cc (_threadinfo::init_thread): Rename from 'init'.
(_threadinfo::init): Define new function. Protect linked list manipulation
with new critical section.
(_threadinfo::call): Reflect function name change.
(_threadinfo::remove): Protect linked list manipulation with new critical
section
* gentls_offsets: Rework to allow multi-line "don't parse this" protection.
* init.cc (dll_entry): Don't remove threads info stuff here since the remove
function uses a critical section which can't be used during thread creation or
destruction.
* thread.cc (pthread::exit): Call _threadinfo remove function here.
* exceptions.cc: Ditto.
* fhandler_termios.cc: Ditto.
* signal.cc: Ditto.
* sigproc.cc: Ditto.
* Makefile.in: Revert previous change which made a cygwin.din newer than a
version.h a warning rather than an error.
* Makefile.in (DLL_OFILES): Add sigfe.o. Remove reliance on cygwin.def from
cygwin0.dll dependency since dependence on sigfe.o implies that. Generate def
file on the fly using 'gendef'.
* configure.in: Don't auto-generate cygwin.def.
* configure: Regenerate.
* cygwin.din: Add SIGFE stuff where appropriate.
* dcrt0.cc (dll_crt0_1): Initialize cygwin tls early in process startup. Set
_main_tls to address of the main thread's cygwin tls.
* debug.h: Remove now unneeded WFSO and WFMO declarations.
* exceptions.cc (_last_thread): Define.
(set_thread_state_for_signals): New function.
(reset_thread_exception_for_signals): Ditto.
(init_thread_for_signals): Ditto.
(delete_thread_for_signals): Ditto.
(capture_thread_for_signals): Ditto.
(handle_exceptions): Set return address explicitly for exceptions prior to
calling sig_send.
(interrupt_on_return): Eliminate.
(setup_handler): Add preliminary implementation for dealing with
thread-specific signals by querying _main_tls.
(signal_exit): Use cygthread::main_thread_id instead of mainthread.id.
(call_signal_handler_now): For now, just handle the main thread.
* fork.cc (vfork): Save and restore main _my_tls.
* gendef: New file. Generates def file and sigfe.s file.
* gentls_offsets: New file. Generates offsets for perl to use in sigfe.s.
* how-signals-work.txt: Mention that info is obsolete.
* init.cc (dll_entry): Initialize cygwin tls storage here.
* miscfuncs.cc (low_priority_sleep): Make a C function for easier calling from
asm.
* perthread.h (vfork_save::tls): New element.
* signal.cc (nanosleep): Replace previous use of
sigframe.call_signal_handler_now with straight call to call_signal_handler_now.
(abort): Ditto.
* syscalls.cc (readv): Ditto.
* termios.cc (tcsetattr): Ditto.
* wait.cc (wait4): Ditto.
* sigproc.cc (sig_dispatch_pending): Ditto.
(sig_send): Ditto.
* sigproc.h: Declare call_signal_handler_now.
* thread.cc (pthread::thread_init_wrapper): Initialize cygwin tls. Remove
obsolete and unworking signal stuff.
* thread.h (verifyable_object::sigs): Eliminate.
(verifyable_object::sigmask): Eliminate.
(verifyable_object::sigtodo): Eliminate.
(verifyable_object::exit): Make attribute noreturn.
(verifyable_object::thread_init_wrapper): Ditto.
(pthread_null::exit): Ditto.
* winbase.h (__stackbase): Always define.
* winsup.h (low_priority_sleep): Declare as a "C" function.
* include/cygwin/version.h: Bump API version to reflect sigwait export.
* include/sys/queue.h: Protect SLIST_ENTRY from previous declaration.
* signal.cc (sigwait): Implement.
* select.cc (fhandler_base::ready_for_read): Add debugging output.
* devices.h: Define more device pointers via their storage.
* devices.in: Don't parse things like /dev/inet/tcp, as they really have no
meaning.
* devices.cc: Regenerate.
* gendevices: Set proper protection for output file.
* cygtls.h: New file.
* gendef: New file.
* gentls_offsets: New file.
* tlsoffsets.h: New file. Autogenerated.
* config/i386/longjmp.c: Remove. File subsumed by gendef output.
* config/i386/makefrag: Remove obsolete file.
* fhandler.cc: Remove spurious access_worker declaration.
* spawn.cc (spawnve): Make debugging output more accurate.
* cygwin-gperf: Remove.
* devices.cc: Remove.
CTRL_LOGOFF_EVENT to processes running in invisible Windows Stations.
* window.cc (has_visible_window_station): New function.
* winsup.h: Add declaration for has_visible_window_station.
* pinfo.cc (pinfo::init): Do not give FILE_MAP_WRITE access to Everybody.
* exceptions.cc (sig_handle_tty_stop): Do not create pinfo parent with
PID_MAP_WRITE.
* fhandler_process.cc (fhandler_process::fill_filebuf): Ditto for pinfo p.
* signal.cc (kill_worker): Ditto for pinfo dest.
* devices.gperf: New file.
* devices.shilka: New file.
* cygwin-gperf: New file.
* cygwin-shilka: New file.
* fhandler_fifo.cc: New file.
* fhandler_nodevice.cc : New file. Reorganize headers so that path.h precedes
fhandler.h throughout. Remove device argument and unit arguments from fhandler
constructors throughout. Remove pc arguments to fhandler functions and use
internal pc element instead, throughout. Use dev element in pc throughout.
Use major/minor elements rather than units and device numbers previously in
fhandler class. Use correct methods for fhandler file names rather than
directly accessing file name variables, throughout.
* Makefile.in (DLL_OFILES): Add devices.o, fhandler_fifo.o
* dcrt0.cc (dll_crt0_1): Call device::init.
* devices.h: Renumber devices based on more Linux-like major/minor numbers.
Add more devices. Declare standard device storage.
(device): Declare struct.
* dir.cc (opendir): Use new 'build_fh_name' to construct a fhandler_* type.
* dtable.cc (dtable::get_debugger_info): Ditto.
(cygwin_attach_handle_to_fd): Ditto.
(dtable::release): Remove special FH_SOCKET case in favor of generic
"need_fixup_before" test.
(dtable::init_std_file_from_handle): Use either build_fh_dev or build_fh_name
to build standard fhandler.
(dtable::build_fh_name): Renamed from dtable::build_fhandler_from_name. Move
out of dtable class. Don't accept a path_conv argument. Just build it here
and pass it to:
(build_fh_pc): Renamed from dtable::build_fhandler. Move out of dtable class.
Use intrinsic device type in path_conv to create new fhandler.
(build_fh_dev): Renamed from dtable::build_fhandler. Move out of dtable class.
Simplify arguments to just take new 'device' type and a name. Just return
pointer to fhandler rather than trying to insert into dtable.
(dtable::dup_worker): Accommodate above build_fh name changes.
(dtable::find_fifo): New (currently broken) function.
(handle_to_fn): Use strechr for efficiency.
* dtable.h: Reflect above build_fh name changes and argument differences.
(fhandler_base *&operator []): Return self rather than copy of self.
* fhandler.cc (fhandler_base::operator =): Use pc element to set normalized
path.
(fhandler_base::set_name): Ditto.
(fhandler_base::raw_read): Use method to access name.
(fhandler_base::write): Correctly use get_output_handle rather than get_handle.
(handler_base::device_access_denied): New function.
(fhandler_base::open): Eliminate pc argument and use pc element of
fhandler_base throughout.
(fhandler_base::fstat): Detect if device is based in filesystem and use
fstat_fs to calculate stat, if so.
(fhandler_base::fhandler_base): Eliminate handling of file names and, instead,
just free appropriate component from pc.
(fhandler_base::opendir): Remove path_conv parameter.
* fhandler.h: Remove all device flags.
(fhandler_base::pc): New element.
(fhandler_base::set_name): Change argument to path_conv.
(fhandler_base::error): New function.
(fhandler_base::exists): New function.
(fhandler_base::pc_binmode): New function.
(fhandler_base::dev): New function.
(fhandler_base::open_fs): New function.
(fhandler_base::fstat_fs): New function.
(fhandler_base::fstat_by_name): New function.
(fhandler_base::fstat_by_handle): New function.
(fhandler_base::isfifo): New function.
(fhandler_base::is_slow): New function.
(fhandler_base::is_auto_device): New function.
(fhandler_base::is_fs_special): New function.
(fhandler_base::device_access_denied): New function.
(fhandler_base::operator DWORD&): New operator.
(fhandler_base::get_name): Return normalized path from pc.
(fhandler_base::get_win32_name): Return windows path from pc.
(fhandler_base::isdevice): Renamed from is_device.
(fhandler_base::get_native_name): Return device format.
(fhandler_fifo): New class.
(fhandler_nodevice): New class.
(select_stuff::device_specific): Remove array.
(select_stuff::device_specific_pipe): New class element.
(select_stuff::device_specific_socket): New class element.
(select_stuff::device_specific_serial): New class element.
(select_stuff::select_stuff): Initialize new elements.
* fhandler_disk_file.cc (fhandler_base::fstat_by_handle): Move to base class
from fhandler_disk_file.
(fhandler_base::fstat_by_name): Ditto.
(fhandler_base::fstat_by_name): Ditto.
(fhandler_disk_file::open): Move most functionality into
fhandler_base::open_fs.
(fhandler_base::open_fs): New function.
(fhandler_disk_file::close): Move most functionality into
fhandler_base::close_fs.
(fhandler_base::close_fs): New function.
* fhandler_mem.cc (fhandler_dev_mem::open): Use device name in debugging
output.
* fhandler_socket.cc (fhandler_socket::set_connect_secret): Copy standard
urandom device into appropriate place.
(fhandler_socket::accept): Reflect change in fdsock return value.
* fhandler_tty.cc: See "throughouts" above.
* net.cc: Accommodate fdsock change throughout.
(fdsock): Return success or failure, accept fd argument and device argument.
* path.cc (symlink_info::major): New element.
(symlink_info::minor): New element.
(symlink_info::parse_device): Declare new function.
(fs_info::update): Accommodate changes in path_conv class.
(path_conv::fillin): Ditto.
(path_conv::return_and_clear_normalized_path): Eliminate.
(path_conv::set_normalized_path): New function.
(path_conv::path_conv): Set info in dev element. Use path_conv methods Check
for FH_FS rather than FH_BAD to indicate when to fill in filesystem stuff.
where appropriate rather than direct access. Use set_normalized_path to set
normalized path.
(windows_device_names): Eliminate.
(get_dev): Ditto.
(get_raw_device_number): Ditto.
(get_device_number): Ditto.
(win32_device_name): Call new device name parser to do most of the heavy
lifting.
(mount_info::conv_to_win32_path): Fill in dev field as appropriate.
(symlink_worker): Handle new device files.
(symlink_info::check): Ditto.
(symlink_info::parse_device): Define new function.
* path.h (executable_states): Move here from fhandler.h.
(fs_info): Rename variables to *_storage and create methods for accessing same.
(path_conv): Add dev element, remove devn and unit and adjust inline methods to
accommodate.
(set_normalized_path): Declare new function.
* pinfo.cc (_pinfo::commune_recv): Add broken support for handling fifos.
(_pinfo::commune_send): Ditto.
* pipe.cc (fhandler_pipe::close): check for existence of handle before closing
it.
(handler_pipe::create): Rename from make_pipe. Change arguments to accept
fhandler_pipe array. Accommodate fifos.
(pipe): Rework to deal with fhandler_pipe::create changes.
(_pipe): Ditto.
* select.cc: Use individual device_specific types throughout rather than
indexing with obsolete device number.
(set_bits): Use is_socket call rather than checking device number.
* shared_info.h (CURR_MOUNT_MAGIC): Update.
(conv_to_win32_path): Reflect addition of device argument.
* syscalls.cc (mknod_worker): New function.
(open): Use build_fh_name to build fhandler.
(chown_worker): Detect if this is an 'auto' device rather than an on-filesystem
device and handle appropriately.
(chmod_device): New function.
(chmod): Detect if this is an 'auto' device rather than an on-filesystem device
and handle appropriately. Use chmod_device to set mode of in-filesystem
devices.
(stat_worker): Eliminate path_conv argument. Call build_fh_name to construct
fhandler. Use fh->error() rather than pc->error to detect errors in fhandler
construction.
(access_worker): New function pulled from access. Accommodate in-filesystem
devices.
(access): Use access_worker.
(fpathconf): Detect if this is an 'auto' device rather than an on-filesystem
device and handle appropriately.
(mknod_worker): New function.
(mknod32): New function.
(chroot): Free normalized path -- assuming it was actually cmalloced.
* tty.cc (create_tty_master): Tweak for new device class.
(tty::common_init): Ditto.
* winsup.h (stat_worker): Remove.
(symlink_worker): Declare.
* exceptions.cc (set_process_mask): Just call sig_dispatch_pending and don't
worry about pending_signals since sig_dispatch_pending should always do the
right thing now.
(sig_handle): Reorganize SIGCONT handling to more closely conform to SUSv3.
* pinfo.h: Move __SIG enum to sigproc.h.
(PICOM_FIFO): New enum element.
(_pinfo): Remove 'thread2signal' stuff throughout class.
(_pinfo::commune_send): Make varargs.
(_pinfo::sigtodo): Eliminate.
(_pinfo::thread2signal): Ditto.
* signal.cc (kill_worker): Eliminate call to setthread2signal.
* sigproc.cc (local_sigtodo): Eliminate.
(getlocal_sigtodo): Ditto.
(sigelem): New class.
(pending_signals): New class.
(sigqueue): New variable, start of sigqueue linked list.
(sigcatch_nonmain): Eliminate.
(sigcatch_main): Eliminate.
(sigcatch_nosync): Eliminate.
(sigcomplete_nonmain): Eliminate.
(pending_signals): Eliminate.
(sig_clear): Call signal thread to clear pending signals, unless already in
signal thread.
(sigpending): Call signal thread to get pending signals.
(sig_dispatch_pending): Eliminate use of pending_signals and just check
sigqueue.
(sigproc_terminate): Eliminate all of the obsolete semaphore stuff. Close
signal pipe handle.
(sig_send): Eliminate all of the obsolete semaphore stuff and use pipe to send
signals.
(getevent): Eliminate.
(pending_signals::add): New function.
(pending_signals::del): New function.
(pending_signals::next): New function.
(wait_sig): Eliminate all of the obsolete semaphore stuff. Use pipe to
communicate and maintain a linked list of signals.
* sigproc.h: Move __SIG defines here. Add __SIGPENDING.
(sig_dispatch_pending): Remove "C" specifier.
(sig_handle): Accept a mask argument.
* thread.cc: Remove signal handling considerations throughout.
* pinfo.cc (pinfo_init): Initialize myself->gid.
(pinfo::init): Create the "access" variable, set it appropriately and use it to
specify the requested access.
* exceptions.cc (sig_handle_tty_stop): Add PID_MAP_RW in pinfo parent.
* signal.cc (kill_worker): Ditto for pinfo dest.
* syscalls.cc (setpgid): Ditto for pinfo p.
* exceptions.cc (early_stuff_init): Delete.
(init_console_handler): New function - top half of early_stuff_init.
(init_global_security): New function - bottom half of early_stuff_init.
(sig_handle): Avoid special hExeced test for SIGINT. Just terminate the
captive process.
(signal_exit): Add debugging output.
* fhandler_tty.cc (fhandler_tty_slave::open): Don't allocate a console if one
already seems to exist. Properly initialize ctrl-c handling if we do allocate
a console.
* winsup.h (early_stuff_init): Delete declaration.
(init_console_handler): New declaration.
(init_global_security): New declaration.
set.
* exceptions.cc (sig_handle_tty_stop): Don't reset sigCONT event since it is
reset automatically.
* fork.cc (fork): Remove obsolete usage of PID_SPLIT_HEAP.
* include/sys/cygwin.h: Ditto.
* sigproc.cc (sig_send): Use sigframe init method to set frame since it checks
for previous ownership of the frame.
* sigproc.h (sigframe::init): Accept an "is_exception" argument.
become unmasked.
* sigproc.cc (pending_signals): Flip back to a global.
(wait_sig): Don't set pending signals when there is an armed semaphore or
signal is blocked.
* shared.cc (shared_info::initialize): Add a username parameter for user-mode
mounts. Reorganize to try to avoid startup race.
(memory_init): Move some stuff into shared_info::initialize.
* shared_info.h (shared_info::initialize): Change declaration.
(CURR_SHARED_MAGIC): Update.
* cygheap.h (cygheap_types): Add HEAP_SIGS.
* exceptions.cc (signal_fixup_after_exec): Remove from this file.
* pinfo.h (pinfo::getsig): Just return global_sigs array.
(pinfo::sigs): Delete.
* sigproc.cc (signal_fixup_after_exec): Move it here.
(global_sigs): New global array, moved from pinfo structure.
(sigalloc): New function. Allocate global sigaction array here.
(proc_subproc): Remove copysigs call. It's automatic now.
* include/sys/cygwin.h (PID_NOCLDSTOP): New value.
* signal.cc (sigaction): Set myself->PID_NODCLDSTOP when appropriate.
* sigproc.h (sigalloc): Declare.
* fnmatch.c (fnmatch): Use C90 parameters.
(rangematch): Ditto.
* fhandler.cc (fhandler_base::raw_read): Use right coercion to avoid a compiler
warning.
* configure.in: Fill in MALLOC_OFILES with either debugging or regular malloc.
* configure: Regenerate.
* dlmalloc.c: Make various fruitless changes to attempt to get to work.
* dlmalloc.h: Ditto.
* malloc.cc (free): Check malloc pool when debugging.
* path.cc (win32_device_name): Eliminate compiler warning.
* sigproc.cc (sig_dispatch_pending): Remove use of was_pending. Let
thisframe.call_signal_handler decide if handler should be called rather than
using bogus was_pending check.
* exceptions.cc (interrupt_setup): Remove accidentally checked in debugging
code.
* heap.cc (sbrk): Save rounded addess in user_heap_max.
* sigproc.cc (pending_signals): Make static.
(wait_sig): Use defined values rather than integers for rc. Never scan both
todo arrays as this could cause hangs if signals arrive from two different
sources. Rename saw_pending_signals to saw_failed_interrupt. Exit loop when
signal found. Enter low-priority sleep, if necessary, after finished
signalling completion. Set pending_signals when blocked
(from Pierre Humblet).
* exceptions.cc (setup_handler): Move non-interruptible condition handling
(back) to wait_sig (as suggested by Pierre Humblet).
(set_process_mask): Don't worry about calling sig_dispatch_pending from
sigthread since it is detected in the function anyway.
(sig_handle): Eliminate thisproc arg. Don't call sig_dispatch_pending on
SIGCONT since that should happen automatically.
* sigproc.cc (sig_dispatch_pending): Eliminate justwake argument. Just return
when called from sigthread.
(wait_sig): Change some variables to bool. Change inner while to an if. Move
uninterruptible signal handling here.
(sigproc_terminate): Don't call sig_dispatch_pending. Just increment semaphore
on exit.
* speclib: Use slightly different (but still flawed) method for determining
symbols to extract from libraries.
is a tty associated with the process. Send SIGHUP on CTRL_LOGOFF_EVENT.
* fhandler_tty.cc (fhandler_tty_slave::open): Adjust console open handle
counter regardless of whether this is a pty or tty.
(fhandler_tty_slave::open): Ditto.
(fhandler_tty_slave::dup): Ditto.
(fhandler_tty_common::set_close_on_exec): Ditto.
(fhandler_tty_master::init_console): Decrement console open handle counter
after init since it will now be handled by all tty open.
* syscalls.cc (setsid): Rework debugging output slightly.
cygerrno.h.
* include/cygwin/config.h (__DYNAMIC_REENT__): Define.
* include/cygwin/version.h: Bump API minor version.
* cygwin.din: Export __getreent
* cygerrno.h: Include errno.h. Fix places where _impure_ptr is used directly
to store the errno value.
* debug.cc (__set_errno): Ditto.
* errno.cc: Remove _RRENT_ONLY define to get errno.cc compiled.
* signal.cc: Rename _reent_clib to _REENT throughout.
* thread.h (reent_clib): Remove prototype.
* thread.cc (reent_clib): Rename reent_clib to __getreent. Return _impure_ptr
until MTinterface is initialized.
(reent_winsup): Fix a possible SEGV when _r == NULL. Return NULL instead.
* MTinterface::fixup_after_fork: Switch reent back to _impure_ptr to keep
signal handling running when fork is called from a thread other than the
mainthread.
when the real {u,g}ids and the groups are original.
Move RevertToSelf and ImpersonateLoggedOnUser to the main line.
* uinfo.cc (uinfo_init): Reorganize. If CreateProcess was called
while impersonated, preserve the uids and gids and call
ImpersonateLoggedOnUser. Preserve the uids and gids on Win9X.
* exceptions.cc (error_start_init): Quote the pgm in the command.
* exceptions.cc (signal_fixup_after_exec): Eliminate argument in definition.
Don't reset signal handlers after spawm. Just treat like fork/exec.
* dcrt0.cc (dll_crt0_1): Don't pass PROC_SPAWN argument to
signal_fixup_after_exec.
* syscalls.cc (unlink): Don't change attributes of file if not readonly/system.
Ditto for resetting of arguments.
* exceptions.cc (try_to_debug): Set priority of current thread rather than the
main thread. Make busy waiting loop less busy. Restore priority when function
returns.
needed.
* dtable.cc (dtable::vfork_parent_restore): Remove assertion.
* pipe.cc (fhandler_pipe::close): Don't close read_state during fork_fixup
since it wasn't inherited.
via signal.
(signal_exit): Enter critical section early to avoid exit races with main
thread.
* dcrt0.cc (do_exit): Use exit_lock critical section to avoid races.
(cygthread::detach): Accept a "wait_for_signal" argument.
(cygthread::terminate_thread): New function.
* cygthread.cc (cygthread::stub): Set stack pointer argument.
(cygthread::terminate_thread): New function. Forcibly terminate thread.
(cygthread::detach): Optionally wait for signals and kill thread when signal
arrives.
* exceptions.cc (signal_exit): Set signal_arrived prior to exiting to wake up
anything blocking on signals.
* fhandler.h (fhandler_base::set_r_no_interrupt): Change to accept bool
argument.
(fhandler_pipe::ready_for_read): Declare.
* pipe.cc (pipeargs): New structure.
(read_pipe): New thread stub wrapper for normal pipe read.
(fhandler_pipe::read): Modify to call reader in a cygthread, terminating on
signal, as appropriate.
* select.cc (fhandler_pipe::ready_for_read): Define new function.
waiting for signals to happen.
* signal.cc (sleep): Force pending signal delivery before sleeping.
(usleep): Ditto.
(signal): Force pending signal delivery before manipulating signal stuff.
(sigprocmask): Ditto.
(kill_worker): Ditto.
(abort): Ditto.
(sigaction): Ditto.
* syscalls.cc (readv): Force pending signal delivery before I/O.
(writev): Ditto.
(open): Ditto.
* net.cc: Ditto, throughout.
* sigproc.cc (sig_dispatch_pending): Deliver any pending signals prior to
returning.
* tty.cc (tty::make_pipes): Increase pipe buffer size.
timeslice' wait.
(setup_handler): Revamp YA to attempt to deliver signal multiple times on
failure rather than punting to wait_sig.
* miscfuncs.cc (low_priority_sleep): Accept INFINITE sleep to mean "don't reset
the priority after setting it to idle". Return previous priority.
* winsup.h (SLEEP_0_STAY_LOW): Define.
(low_priority_sleep): Return an int.
* sigproc.h: Define WAIT_SIG_PRIORITY here.
* sigproc.cc: Remove WAIT_SIG_PRIORITY definition.
idle if pending signals to allow other threads to get into interruptible state.
* miscfuncs.cc (sys_mbstowcs): Save current thread in variable to avoid an OS
call.
* wait.cc (wait_sig): Reset thread priority each time through loop since the
priority may have been set down to deal with pending signals.
is supposed to be giving up time slice.
* fhandler_console.cc (fhandler_console::read): Switch button 2/3 output escape
sequences to be consistent with xterm.
(child_info_fork::heaptop): Remove obsolete element.
(child_info_fork::heabbase): Ditto.
(child_info_fork::heapptr): Ditto.
(child_info_fork::mount_table): New element.
(child_info_fork::myself_addr): Ditto.
* dcrt0.cc (dll_crt0_1): Set mount_table and myself_addr when forking.
(initial_env): Add newline to "sleeping" message.
* dll_init.cc (reserve_upto): Accommodate cygwin heap when freeing memory.
Make debugging output a little more descriptive.
* fork.cc (fork_parent): Save mount_table and myself_addr.
* pinfo.cc (myself_addr): New variable.
(set_myself): Pass PID_MYSELF flag to init.
(pinfo::Init): Honor PID_MYSELF. Save address where myself shared memory
resides in myself_addr, for fork.
* pinfo.h (myself_addr): Declare.
* shared.cc (memory_init): On fork, use previously saved address for location
of mount table.
* include/sys/cygwin.h (PID_MYSELF): New value.
* dtable.cc (dtable::stdio_init): Don't pass access type to
init_std_file_from_handle. It's always the same.
(dtable::init_std_file_from_handle): Remove access type argument. Assume
read/write.
* dtable.h (dtable::init_std_file_from_handle): Ditto for declaration.
* exceptions.cc (try_to_debug): Don't try to debug if already being debugged.
* fhandler_console.cc (shared_console_info_save): New variable.
(fhandler_console::get_tty_stuff): Save address of shared console stuff for
fork.
Initialize thread_sync event here which is used to Suspend using an event
rather than relying on SuspendThread/ResumeThread.
(cygthread::init): Save handle to runner thread for future termination.
(cygthread::cygthread): Only resume thread when it is actually suspended.
Otherwise signal thread completion event.
(cygthread::terminate): Forcibly terminate runner thread and any helper
threads. Call DisableThreadLibrary calls if execing.
* cygthread.h (cygthread::thread_sync): Declare.
* dcrt0.cc (do_exit): Eliminate calls to obsolete window_terminate and
shared_terminate.
* exceptions.cc (events_terminate): Don't bother closing title_mutex since it
is going away anyway.
* pinfo.cc (_pinfo::exit): Call cygthread::terminate to ensure that threads are
shut down before process exit or otherwise strange races seem to occur.
* shared.cc (shared_terminate): Eliminate.
* shared.h (shared_terminate): Eliminate declaration.
* winsup.h (window_terminate): Eliminate declaration.
* spawn.cc (spawn_guts): Call cygthread::terminate early in process if execing.
Call DisableThreadLibrary calls if execing.
* window.cc (Winmain): Call ExitThread to force exit.
(window_terminate): Eliminate.
* dcrt0.cc (do_exit): Track exit state more closely.
(cygthread::stub): Report overflows in cygwin thread pool when DEBUGGING is on
and special environment variable is not set.
(cygthread::terminate): Set event only when event actually exists.
* exceptions.cc (signal_exit): Set priority of main thread to low before
setting current thread to high.
already taken care of that.
* fhandler_console.cc (fhandler_console::open): Initialize handles to NULL.
(fhandler_console::close): Ditto. GNUify non-GNU formatted functions calls
throughout.
* sigproc.h (sigCONT): Declare.
(wait_sig): Create sigCONT event here.
* exceptions.cc (sig_handle_tty_stop): Wait for sigCONT event rather than
stopping thread.
(sig_handle): Set sigCONT event as appropriate on SIGCONT rather than calling
ResumeThread.
* dcrt0.cc (dll_crt0_1): Just wait for signal thread to go live rather than
going through the overhead of invoking it.
* fork.cc (fork_child): Ditto.
* exceptions.cc (signal_fixup_after_fork): Call sigproc_init here.
* sigproc.cc (proc_can_be_signalled): Assume that the signal thread is live.
(sig_dispatch): Ditto.
(sig_send): Ditto.
(wait_for_sigthread): Renamed from "wait_for_me". Assume that wait_sig_inited
has been set and that this function is only called from the main thread.
* winsup.h (wait_for_sigthread): Declare new function.
(readlink): Use path_conv method rather than field.
* fhandler_disk_file.cc (fhandler_disk_file::fstat_helper): Ditto, throughout.
* path.h (path_conv): Make fileattr private.
* exceptions.cc (try_to_debug): Default to idle priority when looping.
warning.
* shared.cc (memory_init): Remove debug_init call.
* debug.h (handle_list): Change "clexec" to "inherited".
* debug.cc: Remove a spurious declaration.
(setclexec): Conditionalize away since it is currently unused.
(add_handle): Use inherited field rather than clexec.
(debug_fixup_after_fork_exec): Ditto. Move debugging output to delete_handle.
(delete_handle): Add debugging output.
* fhandler.cc (fhandler_base::set_inheritance): Don't bother setting
inheritance in debugging table since the handle was never protected anyway.
(fhandler_base::fork_fixup): Ditto.
* exceptions.cc (debugger_command): Revert.
set up.
(break_here): New function, for debugging.
(initial_env): Add program name to "Sleeping" message. Implement new
"CYGWIN_DEBUG" environment variable option.
* exceptions.cc (debugger_command): Add argument to dumper call.
* strace.cc (strace::hello): Use winpid if cygwin pid is unavailable.
(strace::vsprntf): Ditto.
functionality.
* cygheap.cc (init_cheap): Move cygheap_max calculation to _csbrk.
(_csbrk): Reorganize to not assume first allocation is <= 1 page.
(cygheap_setup_for_child): Mark protected handle as inheritable.
* cygheap.h (cygheap_debug): New struct.
(init_cygheap): Add new structure when debugging.
* dcrt0.cc (dll_crt0_1): Remove call to debug_init. Close ppid_handle here, if
appropriate. Don't protect subproc_ready, since it is already protected in the
parent. Call memory_init prior to ProtectHandle to ensure that cygheap is set
up. Call debug_fixup_after_fork_exec when appropriate.
(_dll_crt0): Don't close ppid_handle here.
* debug.cc: Use cygheap debug structure rather than static elements throughout.
(add_handle): Don't issue a warning if attempt to protect handle in exactly the
same way from exactly the same place. Add pid info to warning output. Accept
additional argument controlling whether handle is to be inherited. Add pid to
stored information.
(debug_fixup_after_fork_exec): Renamed from debug_fixup_after_fork. Reorganize
to avoid erroneously skipping handles.
(mark_closed): Add pid info to warning output.
(setclexec): Rename from setclexec_pid.
* fhandler.cc (fhandler_base::get_default_fmode): Minor reorg.
(fhandler_base::fstat): Add debugging output.
(fhandler_base::set_inheritance): Call setclexec rather than setclexec_pid.
(fhandler_base::fork_fixup): Ditto.
* fhandler_console.cc (get_tty_stuff): Mark protected handle as inheritable.
* fhandler_tty.cc (fhandler_tty_slave::open): Ditto.
* tty.cc (tty::make_pipes): Ditto.
(tty::common_init): Ditto.
* fork.cc (fork_parent): Ditto.
(fork_child): Close protected handles with correct name. Remove
debug_fixup_after_fork call.
* fhandler_socket.cc (fhandler_socket::create_secret_event): Mark protected
handle as inheritable/non-inheritable, as appropriate.
* shared.cc (memory_init): Mark protected handle as inheritable. Call
debug_init here.
* sigproc.cc (wait_sig): Close protected handle with correct name.
* spawn.cc (spawn_guts): Rename spr to subproc_ready and mark it as
inheritable.
* exceptions.cc (debugger_command): Try to run dumper.exe, if found.
* syscalls.cc (fstat64): Don't follow symlinks for path_conv lookup since path
is already resolved.
(LoadFuncEx2): Adapted from LoadFuncEx. Provides control of return value for
nonexistent function.
(NtQueryObject): Declare.
(IsDebuggerPresent): Declare via LoadFuncEx2 and always return true if not
available.
* debug.h (being_debugged): Just rely on IsDebuggerPresent return value.
* dtable.cc (handle_to_fn): New function.
(dtable::init_std_file_from_handle): Attempt to derive std handle's name via
handle_to_fn.
(dtable::build_fhandler_from_name): Fill in what we can in path_conv structure
when given a handle and path doesn't exist.
* fhandler.cc (fhandler_base::open): Don't set the file pointer here. Use
pc->exists () to determine if file exists rather than calling GetFileAttributes
again.
* fhandler.h (fhandler_base::exec_state_isknown): New method.
(fhandler_base::fstat_helper): Add extra arguments to declaration.
(fhandler_base::fstat_by_handle): Declare new method.
(fhandler_base::fstat_by_name): Declare new method.
* fhandler_disk_file (num_entries): Make __stdcall.
(fhandler_base::fstat_by_handle): Define new method.
(fhandler_base::fstat_by_name): Define new method.
(fhandler_base:fstat): Call fstat_by_{handle,name} as appropriate.
(fhandler_disk_file::fstat_helper): Accept extra arguments for filling out stat
structure. Move handle or name specific stuff to new methods above.
(fhandler_disk_file::open): Use real_path->exists rather than calling
GetFileAttributes again.
* ntdll.h (FILE_NAME_INFORMATION): Define new structure.
(OBJECT_INFORMATION_CLASS): Partially define new enum.
(OBJECT_NAME_INFORMATION): Define new structure.
(NtQueryInformationFile): New declaration.
(NtQueryObject): New declaration.
* path.cc (path_conv::fillin): Define new method.
* path.h (path_conv::fillin): Declare new method.
(path_conv::drive_thpe): Rename from 'get_drive_type'.
(path_conv::volser): Declare new method.
(path_conv::volname): Declare new method.
(path_conv::root_dir): Declare new method.
* syscalls.cc (fstat64): Send real path_conv to fstat as second argument.
* dtable.cc (dtable::extend): Use new macro.
* exceptions.cc (try_to_debug): Ditto.
* strace.cc (strace::hello): Only output debugging info when we think we're
being debugged.
muto. Use this argument to construct static storage.
* cygheap.cc (cygheap_init): Reflect above change.
* exceptions.cc (events_init): Ditto.
* malloc.cc (malloc_init): Ditto.
* path.cc (cwdstuff::init): Ditto.
* cygheap.h (cwdstuff): Change name of lock element to make it less generic.
* path.cc (cwdstuff::get_hash): Ditto.
(cwdstuff::get_initial): Ditto.
(cwdstuff::set): Ditto.
(cwdstuff::get): Ditto.
* sigproc.cc (proc_subproc): Ditto.
* debug.cc (lock_debug): Change to method. Use method rather than macro
throughout.
* tty.h (tty_min::kill_pgrp): Declare new method.
* fhandler_termios.cc (tty_min::kill_pgrp): New method.
(fhandler_termios::line_edit): Use new method for killing process.
* dcrt0.cc (do_exit): Ditto.
* dtable.cc (dtable::get_debugger_info): New method for inheriting dtable info
from a debugger.
* tty.cc (tty_init): Attempt to grab file handle info from parent debugger, if
appropriate. # dtable.cc (dtable::stdio_init): Make this a method.
(dtable::init_std_file_from_handle): Don't set fd unless it's not open.
(dtable::build_fhandler_from_name): Move name setting to
dtable::build_fhandler.
(dtable::build_fhandler): Add win32 name parameter.
* dcrt0.cc (dll_crt0_1): Change to use dtable stdio_init.
* dtable.h (dtable): Reflect build_fhandler parameter change.
* mmap.cc (mmap_record::alloc_fh): Don't set name parameter in build_fhandler.
* net.cc (fdsock): Remove set_name call since it is now handled by
build_fhandler.
* sigproc.cc (proc_subproc): Release muto as early as possible.
* uinfo.cc (uinfo_init): Use more robust method for determining if process was
invoked from a non-cygwin process.
* sync.h (muto::init): Eliminate "inheritance" parameter.
(new_muto): Reflect removal of parameter.
* sync.cc (muto::init): Ditto.
* cygheap.cc (cygheap_init): Ditto.
* debug.cc (threadname_init): Ditto.
* exceptions.cc (events_init): Ditto.
* malloc.cc (malloc_init): Ditto.
* path.cc (cwdstuff::init): Ditto.
* sigproc.cc (sigproc_init): Ditto.
* grp.cc (group_lock): Use different method for locking with static member.
(read_etc_group): REALLY ensure that read lock mutex is released.
* passwd.cc (passwd_lock): Use different method for locking with static member.
(read_etc_passwd): REALLY ensure that read lock mutex is released.
* shared.cc (sec_user): Correct reversed inheritance test.
signal came from this process or not.
* sigproc.h: Reflect sig_handle arg change.
* signal.cc (kill_pgrp): Add sigframe info.
(abort): New function. Eliminates newlib function of same name.
* sigproc.cc (wait_sig): Pass "signal from this process" value as arg 2.
(ctrl_c_handler): Attempt to work around potential signal duplication during
process startup.
(sig_handle): Ignore SIGINT when we're just an "exec stub".
* spawn.cc (spawn_guts): Store pid of spawned process in global for use by
ctrl_c_handler.
* dcrt0.cc (dll_crt0_1): Call renamed initialization function.
* winsup.h: Reflect function name change.
* exceptions.cc (try_to_debug): Spin only as long as we don't have a debugger
attached.
* fhandler.h (fhandler_base::set_nohandle): New method.
(fhandler_base::get_nohandle): New method.
* fhandler.cc (fhandler_base::dup): Avoid duplicating handle if there is no
handle.
* fhandler_disk_file.cc (fhandler_disk_file::opendir): Set nohandle flag on
dummy fd.
* Makefile.in: Make intermediate library for eventual inclusion in libcygwin.a
* fhandler.h (fhandler_pipe::fhandler_pipe): Remove default argument setting
since it is no longer used.
* miscfuncs.cc (check_null_str): New function.
(+check_null_str_errno): Ditto.
* net.cc: Add defensive buffer checking throughout.
(cygwin_sendto): Protect against invalid fd.
(cygwin_recvfrom): Ditto.
(cygwin_getpeername): Ditto.
(cygwin_recv): Ditto.
(cygwin_send): Ditto.
* winsup.h: Declare a new function.
* select.cc (set_bits): Fix conditional for setting fd in exceptfds.
* dtable.cc (dtable::build_fhandler): Create fhandler_pipe using correct device
type.
* path.cc (get_devn): Set correct pipe device type from device name.
* dlmalloc.c (errprint): Remove abort() call which causes interesting error
message printing to abort prematurely.
* environ.cc: Sprinkle MALLOC_CHECKs liberally throughout.
(_addenv): Allocate two empty elements at end of environ to
(apparently) work around problems with some buggy applications.
(winenv): Avoid calling alloca if no forced environment variable is present.
* exceptions.cc (open_stackdumpfile): Don't print "Dumping stack trace to..."
when running in a cygwin environment (i.e., the parent is a cygwin process).
* dtable.cc (dtable::init_std_file_from_handle): Move device type detection
code from build_fhandler here since it is only used by this function.
(dtable::build_fhandler_from_name): New method. Renamed from
dtable::build_fhandler.
(dtable::build_fhandler): Use build_fhandler_from_name.
(cygwin_attach_handle_to_fd): Ditto.
* syscalls.cc (_open): Ditto.
(stat_worker): Ditto.
* dtable.h (dtable::build_fhandler_from_name): Rename declaration from
dtable::build_fhandler.
interrupted.
* fhandler.cc: Move pipe methods to pipe.cc.
* fhandler.h (fhandler_pipe): Add new methods.
* fork.cc (sync_with_parent): Make error messages more informative.
* pipe.cc (fhandler_pipe::fhandler_pipe): Move here from fhandler.cc.
(fhandler_pipe::lseek): Ditto.
(fhandler_pipe::set_close_on_exec): New method.
(fhandler_pipe::read): Ditto.
(fhandler_pipe::close): Ditto.
(fhandler_pipe::dup): Ditto.
(make_pipe): Create the guard mutex on the read side of the pipe.
* select.cc (peek_pipe): Use guard_mutex to discover if we have the right to
read on this pipe.
(fhandler_pipe::readh_for_read): Pass the read pipe guard mutex to peek_pipe.
* syscalls.cc (_read): Always detect signal catchers, for now.
* debug.cc (makethread): Eliminate hack to make thread inheritable.
* sigproc.cc (subproc_init): Don't use hack to make thread inheritable.
candidate for deletion. It is actually the end of a linked list chain.
* exceptions.cc (open_stackdumpfile): Default to "unknown" program name if
myself->progname hasn't been filled out yet.
controlling tty is the console and already closed.
* dtable.h (class dtable): Add members to count descriptors referring to the
console.
* dtable.cc (dtable::dec_console_fds): New function to detach process from its
console.
(dtable::release): Decrement the counter of console descriptors.
(dtable::build_fhandler): Increment it.
* exception.cc (ctrl_c_handler): Send SIGTERM to myself when catch
CTRL_SHUTDOWN_EVENT.
* path.cc (path_conv::check): Add signal protection here since retrieving info
about remote shares can take some time.
* path.h (check_null_empty_str_errno): Convert to a function prototype.
* path.cc (check_null_empty_str): Move to miscfuncs.cc.
* miscfuncs.cc (check_null_empty_str_errno): New function.
(__check_null_invalid_struct): Ditto.
(__check_null_invalid_struct_errno): Ditto.
(check_null_empty_str): Change from VirtualQuery to IsBadWritePtr.
* thread.cc (check_valid_pointer): Ditto.
* resource.cc (getrlimit): Use check_null_invalid_struct macro for checking
validity of pointer.
(setrlimit): Ditto.
(setup_handler): Move actions after a successful interrupt to interrupt_setup.
* fork.cc (vfork): Augment debugging output.
* sigproc.cc (proc_subproc): Ditto.
* spawn.cc (spawn_guts): Ditto. Correctly fill out progname when spawn
NO_WAIT. Call signal handler when a signal arrives.
* sigproc.h: Declare a function.
stopping.
* fhandler_console.cc (fhandler_console::fixup_after_fork): Don't set
controlling terminal if just inheriting a handle.
(fhandler_console::fixup_after_exec): Ditto.
* fhandler_tty.cc (fhandler_tty_slave::init): Ditto.
* signal.cc (kill_worker): Set appropriate errno if proc_exists determines that
process does not really exist.
(_crealloc): Ditto.
* dcrt0.cc (dll_crt0_1): Default to always checking for executable for now.
* dtable.cc (dtable::not_open): Move method.
* dtable.h (dtable): Here.
* exceptions.cc (ctrl_c_handler): Don't expect process group leader to handle a
signal if it doesn't exist.
* fhandler.h (fhandler_base): Make openflags protected.
* localtime.c (tzsetwall): Check for __CYGWIN__ as well as __WIN32__.
* path.cc (path_conv::check): Add some comments. Change strcat to assignment.
* lib/_cygwin_S_IEXEC.cc (_cygwin_bob__): Eliminate.
* fhandler_tty.cc (fhandler_console::dup): Set controlling terminal if
necessary.
* fhandler_tty.cc (fhandler_tty_slave::dup): Ditto.
(stack_info::init): Add extra arguments to control method of initialization..
If we have a known good frame, set things up so that this frame is not skipped
the first time through. Record whether caller cares about arguments or not.
(stack_info::walk): Don't store arguments if they're unwanted.
(stackdump): Add isexception parameter for use when called by exception
handler.
(cygwin_stackdump): Accomodate extra argument to stackdump.
(handle_exceptions): Ditto.
(sig_handle): Ditto.
(interrupt_on_return): Accomodate extra arguments to stack walk initialization.
* pinfo.h: Correctly set __SIGOFFSET.
* path.cc (hash_path_name): Avoid calling library functions for simple copying
of characters.
* shortcut.c: Use WIN32_LEAN_AND_MEAN.
* smallprint.c: Ditto.
* environ.cc (getwinenv): Minor clarity fix.
* localtime.c: No need to include windows.h
* string.h: New file.
(init_exceptions): Just use init_exception_handler.
(open_stackdumpfile): New function.
(stack_info::first_time): Eliminate.
(stack_info::init): Set up fields to avoid "first_time" consideration.
(stack_info::walk): Remove "first_time" consideration.
(stackdump): Change arguments to accept initial frame pointer and open stack
file flag.
(stack): Eliminate.
(cygwin_stackdump): Use stackdump() rather than stack().
(try_to_debug): Remove all synchronization logic. Just keep looping in
exception handler until debugger notices us. Return 1 if successfully started
debugger.
(handle_exceptions): Just return if we know that we're debugging. Reorganize
to avoid creating a stackdump file if we are starting a debugger. Return from
exception handler if debugger started successfully.
(sig_handle): Create a stackdump only if debugger wasn't started.
* winsup.h (try_to_debug): Add an argument.
Throughout, change 'OutputStopped' to 'output_stopped', for consistency.
* dtable.cc (stdio_init): Set controlling tty if not set by stdio opens.
* exceptions.cc (ctrl_c_handler): Avoid special pgid checking if no tty is
associated with the process.
(Suggested by Tim Baker <dbaker@direct.ca>)
* external.cc (fillout_pinfo): Return actual tty number for ctty.
* fhandler_console.cc (get_tty_stuff): Set ctty when shared memory is
allocated. Accept flags input from open().
(set_console_ctty): New function.
(fhandler_console::open): Pass flags to get_tty_stuff and rely on this function
to set the ctty, if appropriate.
* fhandler_termios.cc (fhandler_termios::set_ctty): Move to tty_min class.
* fhandler_tty.cc (fhandler_tty_slave::open): Use tc field to access
set_ctty().
* tty.h (TTY_CONSOLE): Move to include/sys/cygwin.h.
(tty_min): Add set_ctty class here.
* include/sys/cygwin.h (TTY_CONSOLE): New home here.
* path.cc (symlink_info): Make contents an actual buffer. Pass more flags to
case_check.
(path_conv::check): Reorganize to do parsing based on posix path rather than
native path.
(symlink_info::check): Expect posix path as input. Translate to native path
here. Accept path_conv flags. Stop parsing if not a symlink regardless of
whether previous path was a symlink.
structure of newlib.
* sigproc.h (sig_send): Add exception parameter to sig_send.
* sigproc.cc (sig_send): Ditto. Use it when setting frame info.
* exceptions.cc (handle_exceptions): Use exception flag when calling sig_send.
[sigframe::~sigframe]: Clear exception field.
[sigframe::set]: Set exception field from caller.
* sigproc.cc (sig_send): Set exception field when frame pointer is passed in.
* exceptions.cc (interrupt_on_return): Always treat exception as interruptible.
it.
* cygwin.din: Remove obsolete "__empty" export.
* exceptions.cc (call_signal_handler_now): Force inclusion of function even
when -finline-functions is specified.
* sigproc.h: Remove obsolete call_signal_handler declaration.
* fhandler_console.cc (cp_get_internal): New function.
(cp_convert): New function.
(con_to_str): New function.
(str_to_con): New function.
(fhandler_console::read): Replace OemToCharBuff with con_to_str.
(fhandler_console::write_normal): Replace CharToOemBuff with str_to_con.
(sigframe::~sigframe): Use unregister method.
(sigframe::call_signal_handler): Declare new method.
* exceptions.cc (sigframe::call_signal_handler): New method. Unregisters
current sigframe before calling signal handler.
(setup_handler): Clear waiting threads prior to arming signal_arrived.
* syscalls.cc (_read): Change goto to loop. Recalculate sigframe inside of
loop so that constructor is called when appropriate.
* wait.cc (wait4): Ditto.
* signal.cc: Change "sig" to "signal" in debugging messages throughout.
* sigproc.cc: Ditto.
complain.
* exceptions.cc (unused_sig_wrapper): Ditto.
* fhandler.h (fhandler_base): Make get_io_handle and friends return self.
* fhandler_tty.cc (fhandler_pty_common::close_on_exec): Accomodate DEBUGGING
flag to avoid spurious warnings when inheritance is set.
* exceptions.cc (setup_handler): Clarify debugging message.
* sigproc.cc (proc_subproc): Remove PROC_CHILDSTOPPED test. It is handled by
normal PROC_CLEARWAIT case.
(wait_sig): Eliminate "dispatched" tracking. Remove __SIGCHILDSTOPPED test.
Decrement counter again before jumping out of InterlockedDecrement loop so that
subsequent InterlockedIncrement will keep the counter at the correctly
decremented value and also detect when there are pending signals.
* sigproc.h: Remove __SIGCHILDSTOPPED element.
(procstuff): Remove PROC_CHILDSTOPPED element.
(sigframe:;set): Call get_winapi_lock after frame is set so that signal handler
thread knows not to call SuspendThread.
(sigframe::~sigframe): Release winapi_lock.
* exceptions.cc (sigthread::get_winapi_lock): New method.
(sigthread::release_winapi_lock): New method.
(setup_handler): Use get_winapi_lock to ensure that signalled thread is not
blocked in a Windows API.
* path.h (path_types): Avoid broken GCC warning.
* child_info.h (child_info): Move shared_h, console_h to cygheap. Add mount_h.
* cygheap.h (init_cygheap): Add shared_h, console_h.
* cygheap.cc (init_cheap): Initialize heap at a fixed location after the shared
memory regions. Initialize cygheap->user name here.
* dcrt0.cc (dll_crt0_1): Call getpagesize () to initialize constants. Remove
cygheap_init since it is done in shared_init now.
(_dll_crt0): Initialize mount_h, remove shared_h and console_h initialization.
* fhandler_console.cc (console_shared_h): Eliminate.
(get_tty_stuff): Use cygheap->console_h rather than console_shared_h.
* heap.cc (heap_init): Use page size constant calculated earlier in
initialization.
* shared.cc: Eliminate cygwin_shared_h. Add cygwin_mount_h.
(mount_table_init): New function for initializing a user mount table.
(open_shared_file_map): Use constant for shared memory region. Initialize
cygheap and mount table here.
(open_shared): Improve debugging output.
(shared_info::initialize): Eliminate call to mount.init.
(shared_terminate): Use cygheap->shared_h. Close cygwin_mount_h.
(open_shared_file_map): Eliminate.
* shared_info.h (mount_info): Add a version field.
(shared_align_past): New macro for calculating location for shared memory
regions.
* sigproc.cc (init_child_info): Eliminate shared_h, console_h.
* spawn.cc (spawn_guts): Pass on cygwin_mount_h iff not a different user.
* syscalls.cc (system_info): New global holding system memory defaults.
(getpagesize): Use system_info.
* uinfo.cc (internal_getlogin): Only fill in user name if nonexistent.
* winsup.h: Declare system_info.
* passwd.cc (read_etc_passwd): Use cygheap->user.name () rather than retrieving
the name again.
signal mask so that stacked signals behave correctly.
(sigdelayed): Avoid a race where a signal could end up calling an incorrect
signal handler if two signals come in close together.
* exceptions.cc (sig_handle_tty_stop): Move setting of PID_STOPPED to earlier
in interrupt.
((interrupt_setup): i.e., here.
(sig_handle): Don't queue multiple SIGSTOPS.
* fhandler.h (bg_check_types): Enumerate return value of bg_check for clarity.
* signal.cc (kill_pgrp): Minor cleanup.
* fhandler_termios.cc (fhandler_termios::bg_check): Use enumerated type for
function return. Don't raise signal if a signal is already queued.
* fhandler_console.cc (fhandler_console::read): Use enumerated return type for
bg_check.
* select.cc: Ditto, throughout.
* read.cc: Ditto, throughout.
* termios.cc: Ditto, throughout.
(_read): YA interrupt detect simplification.
* wait.cc (wait4): Ditto.
* signal.cc (sigaction): Don't treat SIGCONT specially.
* exceptions.cc (interrupt_setup): Save sa_flags of interrupted signal for
later use.
(sig_handler): Default any stopping signal to SIGSTOP.
(call_signal_handler): New function.
(sigdelayed0): New function.
* sigproc.cc (sigproc_init): Initialize SIGSTOP sigaction for special behavior.
* sigproc.h: Define call_signal_handler.
* syscalls.cc (_read): Allow restartable signal behavior.
* environ.cc (codepage_init): To here.
* exceptoins.cc (SIG_NONMASKABLE): Remove SIGCONT from consideration since it
is supposed to be maskable.
* signal.cc (sigaction): Ditto.
* sigproc.cc (wait_sig): Ditto.
* winsup.h: Eliminate global declaration of codepage_init.
* exceptions.cc (stackdump): Avoid creating stackdump when
`rlim_core' is 0.
* resource.cc: New global variable `rlim_core'.
(getrlimit): New function.
(setrlimit): Ditto.
include/cygwin/version.h: Bump minor API version to 32 due to
adding `getrlimit' and `setrlimit'.
include/sys/resource.h: Add defines, types and prototypes for
`getrlimit' and `setrlimit'.
* exceptions.cc (interrupt_setup): Don't set signal mask here or races occur
with main thread. Set it in sigdelayed instead.
(sigreturn): Reflect change in stack order of ebp and flags.
(sigdelayed): Set stack frame correctly. Call set_process_mask here with flags
for last trapped signal.
(signal_dispatch): Add newmask.
* sigproc.cc (wait_sig): Eliminate ill-considered attempt to halt looping
signal processors.
* child_info.h (child_info): Eliminate parent_alive.
* dcrt0.cc (dll_crt0_1): Call fork_init for debugging pid creation.
* fork.cc (fork_child): Reflect change to fixup_mmaps_after_fork arguments.
(slow_pid_reuse): New function to grab last 'n' pids to prevent pid reuse.
(fork_parent): Move last_fork_proc into slow_pid_reuse. Handle fork_pids
debugging. Eliminate unnecessary call to set_child_mmap_ptr.
(fork_init): New debugging function.
* mmap.cc (fixup_mmaps_after_fork): Renamed from recreate_mmaps_after_fork.
Rely on copied data after a fork.
(set_child_mmap_ptr): Eliminate.
* pinfo.h (_pinfo): Eliminate parent_alive, mmap_ptr and reflect above changes.
* spawn.cc (spawn_guts): Eliminate vestiges of "old way" of sending new hProc
to parent process.
(dll_crt0_1): Move sigthread lock initialization to earlier in startup.
* exceptions.cc (interrupt_on_return): Remove previous kludgy attempt to detect
an invalid frame.
(call_handler): Eliminate inner for loop. Grab signal critical section lock
where appropriate.
* sigproc.cc (proc_subproc): Restore uid setting.
* sigproc.h (sigthread): Reinstitute sigthread lock as a critical section.
(sigframe): Grab the sigthread lock before clearing frame to avoid having the
signal thread use an invalid frame.
parent handle.
* dcrt0.cc (_dll_crt0): Close parent's parent handle when spawned or forked.
* debug.cc (add_handle): Correct erroneous reference to handle structure when
printing warning.
* exceptions.cc (interrupt_now): Always return 1.
(interrupt_on_return): Accept a sigthread argument. Check to see if this
argument has been trashed prior to setting up the stack return.
(call_handler): Add a loop around attempts to dispatch signals to detect case
where interrupt_on_return fails.
(_sigdelayed): Set up a temporary frame pointer prior to calling stuff that
could trigger an interrupt or the stack walking code will be very confused.
* fork.cc (fork_parent): Move a lot of the setup of the child process into
proc_subproc.
* spawn.cc (spawn_guts): Ditto. Use ppid_handle to contact logical parent when
reparenting.
* pinfo.h (_pinfo): Remember the logical handle of the parent process.
* sigproc.cc (proc_subproc): Record most stuff necessary for the _pinfo
structure that is inferrable from myself when adding children.
(wait_sig): Always set 'pending_signals' flag when about to kick off the signal
scanning loop. Reset it only if there are no pending signals.
(sigreturn): Construct pseudo-frame-pointer so that signal handler can figure
out where to put return address when signals are coming in quickly.
* path.cc (cwdstuff::get): Allow length 0 buffer length when buffer when NULL.
* path.h: Remove unneeded extern.
* spawn.cc (std_suffixes): Make static. Don't set dwProcessId here since it
makes the process unsignalable. Set strace flag that this is an execed process
stub.
* strace.cc (strace::vsprntf): Use strace flag to indicate when to visually
flag that this is an exec stub.
* include/sys/strace.h (strace): Add 'execing' flag.
active.
* syscalls.cc (_read): Don't clear errno.
* sigproc.cc (wait_sig): Don't scan the waiting process list after a SIGCHLD if
there are no zombies to reap.
* winsup.h: Use __builtin_strcmp.
* environ.cc (posify): Don't initialize len unless it is required
(from DJ Delorie <dj@redhat.com>).
* dcrt0.cc (dll_crt0_1): Call signal_fixup_after_exec where appropriate. Set
myself->uid from parent version. Just use ThreadItem Init method. Close or
store hexec_proc as appropriate.
(_dll_crt0): Store user_data->forkee here so that proper tests can be made
subsequently.
(do_exit): Remove hExeced stuff.
* environ.cc (environ_init): Accept environ count as well as environ pointer.
* environ.h: Reflect above change.
* pinfo.cc (pinfo_init): Ditto. Accept environ count.
(fixup_in_spawned_child): Remove.
* spawn.cc (spawn_guts): Move signal code to dll_crt0_1. Don't suspend execing
process since it is no longer necessary. Store envc.
* exceptions.cc (signal_fixup_after_exec): New function.
(call_handler): Remove hExeced test.
* child_info.h (cygheap_exec_info): Store envc as well as envp.
(child_info_spawn): Store hexec_proc so that it can be closed in child.
* path.cc (normalize_posix_path): Avoid intermediate use of temporary cwd buf.
(normalize_win32_path): Ditto.
(cwdstuff::get_initial): Always set lock.
* sigproc.h: Remove hExeced.
* strace.cc (strace::vsprntf): Modify to accomodate for lack of hExeced.
* thread.cc (MTinterface::Init): Merge Init1 and ClearReent into this method.
(MTinterface::Init1): Eliminate.
(MTinterface::ClearReent): Eliminate.
* thread.h: Reflect above changes.
* include/sys/strace.h (strace): Make microseconds() public. Make various
functions 'regparm', throughout.
* pinfo.h (_pinfo): Inline simple signal manipulation functions. Requires
inclusion of thread.h which was removed from .cc files, where appropriate.
throughout.
* pinfo.cc: Eliminate signal manipulation functions.
(_pinfo::exit): Calculate total rusage for exiting process here.
* cygheap.cc (size2bucket): Eliminate.
(init_buckets): Ditto.
(_cmalloc): Calculate size and bits in a loop rather than going through a
function call.
(_crealloc): Use stored array index to calculate allocated size.
* spawn.cc (spawn_guts): Use _pinfo exit method to exit, calculating cpu usage.
console_handler_thread_waiter. It is obsolete.
(ctrl_c_handler): Don't use console_handler_thread_waiter.
* path.cc (hash_path_name): Fix handling of relative names. Make case
insensitive.
* path.h (suffix_info): Use initializers.
* pinfo.h (_pinfo): Avoid initializers for null case.
* resource.cc (fill_rusage): Zero rest of rusage structure.
* security.cc (set_process_privileges): Don't reopen parent process. Just use
hMainProc.
* signal.cc (signal): Track when a signal handler has been used.
(sigaction): Ditto.
* sigproc.cc (pchildren): Use default initializer.
(zombies): Ditto.
(sigproc_terminate): Avoid closing handles that will be closed on exit anyway.
(wait_sig): Send signal to "parent" on EXECing, not FORKing.
(wait_subproc): Send SIGCHLD here rather than in proc_wait to avoid potential
muto conflicts.
* sigproc.h (sigthread): Don't initialize to zero. It's the default.
* spawn.cc (spawn_guts): Fill in resources from exec parent prior to
termination.
* sync.h (muto): Don't initialize to zero.
* syscalls.cc (close_all_files): Use one lock around entire loop and call
fhandler close/release stuff directly.
(_read): Don't use ready_for_read if there are not signal handlers active.
* dcrt0.cc (dll_crt0_1): Fix display of "title".
(do_exit): Use pinfo exit method to exit.
(__api_fatal): Ditto.
* exceptions.cc (signal_exit): Ditto.
* fork.cc (fork_child): Remove debugging stuff. Use pinfo_fixup_after fork in
place of exec_fixup_after_fork.
* pinfo.cc (pinfo_fixup_after_fork): New method.
(pinfo_fixup_in_spawned_child): Ditto.
(_pinfo::exit): New method.
(_pinfo::init): Remove recursion. Detect pathological case where pinfo
structure already exists for new pid.
* pinfo.h (_pinfo): Reorganize slightly. Add new method and new function
declarations.
* sigproc.cc (proc_exists): Previous simplification was a little to simple.
Try harder to detect if a process exists.
(proc_terminate): Use PID_EXITED setting to determine if process is still
around.
(WFSO): Remove debugging statement.
(WFMO): Ditto.
* spawn.cc (exec_fixup_after_fork): Eliminate.
(spawn_guts): Always set old_title to NULL. Is it really needed? Move
hexec_proc to pinfo.cc. Call pinfo_fixup_in_spawned_child to eliminate handle
link after a spawn.
* include/sys/cygwin.h: Remove PID_NOT_IN_USE. Add PID_EXITED.
parent.
* dcrt0.cc (do_exit): Don't cleanup pinfo on exit. That happens automatically
now.
* exceptions.cc (signal_exit): Ditto.
* fork.cc (fork_parent): Use stack_here value passed in from fork().
(fork): Figure out top of stack here and pass it to fork_parent.
* pinfo.cc (_pinfo::record_death): Eliminate.
* pinfo.h (_pinfo): Ditto.
* sigproc.cc (proc_exists): Simplify.
(proc_terminate): Ditto.
(remove_zombie): Don't cleanup pinfo stuff.
(wait_sig): Send subproc_ready signal whether execed or spawned.
* spawn.cc (spawn_guts): Always create subproc_ready event. Use it for both
exec and spawn.
(_spawnve): Send proper mode to spawn_guts when mode != _P_OVERLAY.
(child_info): Move some fields from child_info_spawn to here.
* cygheap.cc: Make cygheap pointers NOCOPY.
* dcrt0.cc (dll_crt0_1): Copy cygwin heap here regardless of whether we've been
forked or execed.
* dtable.cc (dtable::fixup_after_fork): Just release close-on-exec fds.
* exceptions.cc (stackdump): Respond to C warning.
* fork.cc: Reorganize to minimize stack copying.
(fork_child): New function.
(fork_parent): Ditto.
(sync_with_child): Don't suspend the forkee.
(sync_with_parent): Ditto. Make into a function.
* heap.cc (heap_init): Add some debugging output.
* path.cc (path_conv::check): Add an assertion.
(has_suffix): Ditto.
* security.cc (get_pw_sid): Defend against NULL.
* sigproc.cc (proc_subproc): Fix debugging output.
(wait_sig): Ditto.
* strace.cc: Make statics NO_COPY throughout.
(strace::vsprntf): Defend against NULL.
settings.
(dtable::fixup_after_fork): Ditto.
* exceptions.cc (set_sig_errno): Remove some debugging output.
* path.cc (path_conv::check): Don't OR need_directory with flags sent to
symlink_info::check.
(symlink_info::check): Use PATH_ALL_EXEC to determine when a file is
executable.
* path.h (path_types): Add PATH_ALL_EXEC.
(isexec): Use PATH_ALL_EXEC so that cygexec types will be considered
executable.
* pinfo.h (_pinfo): Add a process handle that is kept open throughout the life
of a cygwin pid.
* sigproc.cc (proc_exists): Remove hopefully obsolete stuff.
(proc_subproc): Set up process handle that is kept open throughout the life of
a cygwin pid. Reorganize PROC_WAIT stuff to use common code.
(proc_terminate): Close pid lifetime process handle.
(checkstate): Cleanup.
(stopped_or_terminated): Move zombie cleanup.
(remove_zombie): To here.
* spawn.cc (spawn_guts): Reorganize reparenting code for 1247th time.
* exceptions.cc (signal_exit): Don't terminate the main thread. Just try to
exit in this thread really quickly.
* signal.cc (kill_pgrp): Fix typo which caused pinfo structure to be assigned
incorrectly.
throughout.
* shared.h: Remove.
* cygwin_version.h: New file.
* delqueue.h: New file.
* environ.h: New file.
* host_dependent.h: New file.
* perprocess.h: New file.
* registry.h: New file.
* security.h: New file.
Include sys/termios.h for files which need it.
* tty.h: New file.
* shared_info.h: New file.
* fhandler.h: Move inline methods that rely on tty stuff to
fhandler_console.cc.
* fhandler_tty.cc (fhandler_pty_master::process_slave_output): Set
output_done_event immediately after reading data to speed up tty output
processing.
(process_output): Set write_error to errno or zero.
(fhandler_tty_slave::write): Check previous write error prior to writing to
slave end of pipe. This allows tty output to be slightly less synchronous.
* fhandler_console.cc (fhandler_console::tcsetpgrp): Moved here from
fhandler.h.
(fhandler_console::set_input_state): Ditto.
* exceptions.cc (unused_sig_wrapper): Remove _raise.
* sigproc.h (class sigframe): Default frames to skip to zero or suffer from
exuberant optimization.
* fhandler_tty.cc (fhandler_tty::write): Set appropriate errno when WriteFile
to pipe fails.
required.
* errno.cc: Use DWORD to hold Windows errors.
(geterrno_from_win_error): New function.
(seterrno_from_win_error): Use geterrno_from_win_error to convert supplied
windows error (suggested by Corinna Vinschen).
* path.cc (symlink_info): Add error element.
* path.cc (path_conv::check): Remove errno setting. Use new symlink_info errno
element to set path_conv error, where appropriate.
(symlink_info::check): Set error element rather than attempting to manipulate
errno. Add more checks for trailing / and /.. even though they are currently
useless. Avoid setting EINVAL.
* path.cc (normalize_posix_path): Correct check for trailing /.
* *.cc: put winsup.h before other headers (for __INSIDE_CYGWIN__);
use cur_environ() instead of just environ
* times.cc: remove import protections
* glob.c: add winsup.h
* localtime.c: ditto
* smallprint.c: ditto
* Makefile.in: don't __INSIDE_CYGWIN__ as it messes up profiling.
the changes below. Redefine process structure to avoid a fixed size table.
Redefine pinfo/_pinfo classes. Use these throughout.
* dcrt0.cc (dll_crt0_1): Accomodate set_myself argument change.
(__api_fatal): Accomodate _pinfo::record_death argument change.
* exceptions.cc (really_exit): Ditto.
(sig_handle_tty_stop): Use pinfo constructor to access process info.
(events_init): Don't create pinfo_mutex since it is no longer required.
* external.cc (fillout_pinfo): Use winpids class to iterate over all system
pids.
(cygwin_internal): lock_pinfo_for_update and unlock_pinfo are now noops.
* fhandler_termios.cc (fhandler_termios::set_ctty): Use pinfo constructor to
access process info.
* fork.cc (fork): Reorganize to initialize child info after the child has
started since that is when we know the child's winpid, which is necessary to
allocate the pinfo shared memory.
* mmap.cc (recreate_mmaps_after_fork): Change arg type to _pinfo.
* pinfo.cc: Rename pinfo methods to _pinfo throughout. Eliminate pinfo_list
stuff.
(set_myself): Accept a pid argument now. Call pinfo initializer to initialize
myself. Detect when this is an "execed" process and create an "indirect" pid
block.
(pinfo_init): Accomodate set_myself arg change.
(procinfo): Remove.
(pinfo::lock_pinfo): Remove.
(pinfo::unlock_pinfo): Remove.
(pinfo::init): New method. Allocates shared memory space for process pinfo
structure.
(pinfo::record_death): Don't call locking functions.
(cygwin_winpid_to_pid): Simplify by using new pinfo constructor.
(EnumProcessesW95): New function for iterating over processes on Windows 95.
(winpids::winpids): New constructor for winpids class. Sets up a list of
process ids.
(enum_init): Initialize w95/wnt pid enumerators.
* shared.cc (shared-info::initialize): Remove pid initialization.
* shared.h: Move pinfo stuff into pinfo.h.
(class shared_info): Remove pinfo_list element.
* signal.cc (kill_worker): Use pinfo constructor to access process info.
(kill_pgrp): Ditto. Use winpids methods to access list of processes.
* sigproc.cc: Throughout, modify to use _pinfo where appropriate.
(proc_exists (pid_t)): New function. Determines if a process exists based on
the pid.
(proc_exists (_pinfo *p): Use new proc_exists function above.
(proc_subproc): Copy pinfo stuff around rather than _pinfo pointers. Try to be
careful about releasing shared memory when we don't need it anymore. Remove
pinfo locks.
(remove_zombies): Remove pinfo memory when zombie is going away.
* sigproc.h: Reflect _pinfo/pinfo changes in sigproc.cc.
* spawn.cc (spawn_guts): Eliminate pinfo *child argument. Reorganize to only
initialize child pinfo after process has been started and we know the windows
pid.
(_spawnve): Reflect spawn_guts changes.
* syscalls.cc (setpgid): Use pinfo constructor to access process info.
(getpgid): Ditto.
(internal_getlogin): Use _pinfo.
* winsup.h: Eliminate pinfo_mutex. Eliminate spawn_guts declaration since it
is static now. Reflect set_myself argument change.
* include/sys/cygwin.h: Add some PID_* enums to accomodate new pinfo stuff.
* include/cygwin/version.h: Update minor version for cygdrive changes below.
EXIT_SIGNAL bit and reorganizes exit value for backwards cygwin handling.
(handle_exceptions): Call signal_exit. Set "core dumped" bit.
(sig_handle): Call signal_exit. Set "core dumped" bit appropriately.
(handle_exceptions): Be more assertive in finding ebp for use under W2K.
Create a dummy stack frame for cases where program is dying and a stack dump is
being output.
(sig_handle): Fill out a GetThreadContext for use with a user-generated "core
dump".
* autoload.h: Add additional field to autoload block for handling unimplemented
functions.
(LoadDLLfuncEx): New function which accepts additional parameter for
controlling unimplemented function behavior.
(LoadDLLfunc): Use LoadDLLfuncEx.
* dcrt0.cc: Use new arguments for LoadDLLfunc. Add advapi32 routines.
(noload): Rewrite in assembler. Handle new unimplemented function type.
* exceptions.cc: Eliminate another vestige of StackWalk stuff.
* net.cc: Use new arguments for LoadDLLfunc.
* uinfo.cc: Ditto.
* config.h.in: Remove obsolete define.
* path.h (isdrive): New macro.
* dcrt0.cc (globify): Use new macro to determine if a string refers to an
MS-DOS drive.
* environ.cc (winenv): Ditto.
* spawn.cc (find_exec): Ditto.
* path.cc (get_raw_device_number): Ditto.
(mount_info::conv_to_posix_path): Ditto.
(chdir): Ditto.
(cygwin_posix_path_list_p): Ditto.
(cygwin_split_path): Ditto.
(path_conv::check): Move tmp_buf to beginning of function since it can be used
earlier in the loop. Use tmp_buf rather than 'root' to hold root information.
(mount_info::conv_to_win32_path): Add trailing slash to end of mount path when
it translates to a drive. Add defensive code to avoid writing beyond the end
of 'dst'.
just checks for validity. Flag module handle == 0 as noninterrupible.
(call_handler): Always acquire and release ebp lock. Loop for only a fixed
amount of time attempting to grab mutos and find an interruptible PC.
referring to something like c:\.
* dcrt0.cc (dll_crt0_1): Move uinfo initialization prior to sig_send
initialization to give signal thread a chance to finish.
* debug.cc (WFSO): Move to sigproc.cc
(WFMO): Ditto.
* exceptions.cc (interruptible): Allocate slightly more space for directory
just for paranoia's sake.
(call_handler): Eliminate nonmain argument. Determine if main thread has set a
frame pointer and use it if so.
(sig_handle): Eliminate nonmain argument.
* net.cc: Record frame information in appropriate routines throughout.
* select.cc (select): Ditto.
* sigproc.cc: Use sigthread structure to record mainthread id throughout.
(sig_send): Record frame information for signal handler.
(wait_sig): Reflect argument change in sig_handle.
(WFSO): Move here and record frame information for signal handler.
(WFMO): Ditto.
* sigproc.h: Implement new "sigthread" class. Implement "sigframe" class for
manipulating signal frame info.
* thread.cc (__pthread_kill): Use standard _kill() function rather than calling
sig_send directly.
* winsup.h: Eliminate ebp element from signal_dispatch class.
name check. Windows 95 seems to null-terminate the directory otherwise.
(interrupt_on_return): Issue a fatal error if we can't find the caller's stack.
* spawn.cc (find_exec): Accept a path_conv argument rather than a buffer so
that the caller can find things out about a translated path.
(perhaps_suffix): Ditto.
(spawn_guts): Allocate path_conv stuff here so that we can find out stuff about
the translated path (this is work in progress).
* environ.cc (environ_init): Accept an as-yet unused argument indicating
whether we were invoked from a cygwin parent or not.
(winenv): Ditto.
(posify): Accept an argument indicating whether the path has already been
translated.
* dlfcn.cc (check_access): Provide a path_conv buffer to find_exec.
* exec.cc (sexecvpe): Ditto.
* path.cc (path_conv::check): Rename from path_conv::path_conv.
(mount_item::getmntent): Recognize "Cygwin executable" bit.
(symlink_info::check): Remove debugging statements.
* path.h (class path_conv): Add iscygexec method. Rewrite constructor to call
"check" method to allow multiple operations on a path_conv variable.
* pinfo.cc (pinfo_init): Pass argument to environ_init.
* shared.h: Bump PROC_MAGIC.
* winsup.h: Reflect above changes to function arguments.
* include/sys/mount.h: Add MOUNT_CYGWIN_EXEC type.
in forked process.
(interruptible): Flag as interruptible when running in main process module.
(interrupt_setup): Save return address and address of return address.
(signal_fixup_after_fork): New function. Uses above two values to restore
proper behavior to forked process.
(interrupt_on_return): Pass return address address to interupt_setup.
(interrupt_now): Pass NULL for return address address to interrupt_setup.
* fork.cc (fork): Call signal_fixup_after_fork.
* shared.h: Lint cleanups.
* winsup.h: Ditto.
* debug.cc (threadname_init): Pass name of lock as arg 2 of new_muto.
* malloc.cc (malloc_init): Ditto.
* sigproc.cc (sigproc_init): Ditto.
* exceptions.cc (events_init): Ditto.
(call_handler): Eliminate special case for hExeced. Report locked thread in
debugging output.
* fhandler.cc (fhandker_pipe::fhandler_pipe): Propagate device type to base
class.
* fhandler.h (fhandler_pipe): Ditto.
* hinfo.cc (hinfo::build_fhandler): Pass specific type of pipe to constructor.
* spawn.cc (spawn_guts): Eliminate dependency on signal when waiting for
subprocess.
* strace.cc: Remove obsolete #ifdef.
* sync.cc (muto::muto): Save the name of the muto.
(muto:~muto): Also release the muto.
* sync.h: Add a muto name field.
* select.cc (peek_pipe): Avoid doing a PeekNamedPipe on the write end of a
pipe.
* exceptions.cc (sfta): Eliminate obsolete function.
(sgmb): Eliminate obsolete function.
(class stack_info): Remove MS method for walking the stack.
(stack_info::init): Just initialize required fields.
(stack_info::brute_force): Rename to stack_info::walk.
(handle_exceptions): Pass derived frame pointer to sig_send.
(interrupt_setup): Clear saved frame pointer here.
(interrupt_on_return): thestack is no longer a pointer.
(call_handler): Accept a flag to indicate when a signal was sent from other
than the main thread. Use saved frame pointer for determining where to place
signal handler call.
(sig_handle): Accept "nonmain" argument. Pass it to call_handler.
* fhandler_tty.cc (fhandler_tty_common::__acquire_output_mutex): Change
debugging output slightly.
* (fhandler_tty_common::__release_output_mutex): Ditto.
(fhandler_tty_slave::read): Fix a comment, remove a goto.
* sigproc.cc (sig_send): Accept an optional frame pointer argument for use when
suspending the main process. sigcomplete_main is an autoreset event now. Save
frame pointer for non-main operation.
(wait_sig): Make sigcomplete_main an autoreset event. Eliminate NOSIGQUEUE.
Pass rc to sig_handle to signify if this was a nonmain process.
* sigproc.h: Reflect change to sig_send argument.
* syscalls.cc (swab): Eliminate swab function since it is now available in
newlib.
* winsup.h (signal_dispatch): Change CONTEXT cx to DWORD ebp.
(getprogname): Eliminate obsolete function.
(dll_crt0_1): Move initial strace initialization output to set_myself.
* exceptions.cc (interruptible): Add debugging output.
(interrupt_setup): New function.
(interrupt_now): Use interrupt_setup to set up common interrupt handler stuff.
(interrupt_on_return): Ditto.
(call_handler): Move signal_arrived arm and clear threads to region where
signalled thread is suspended or suffer races.
* pinfo.cc (set_myself): Output interesting information when strace is first
initialized. Initialize progname here.
* sigproc.cc (sig_dispatch_pending): Modify to ensure that flush signal are
sent synchronously.
* strace.cc (strace_vsprintf): Move code into strace program.
* uname.cc (uname): Use 'osname' global to construct cygwin name + Windows type
+ version.
(call_handler): Allow signals to be sent even if signalled thread is stopped.
Change order of signal_arrived arming/waiting threads clearing to eliminate a
race.
(reset_signal_arrived): New helper function.
* malloc.cc (malloc_init): Use mutos so that signal handler can keep track of
who owns the lock.
(__malloc_lock): Ditto.
(__malloc_unlock): Ditto.
* sync.h (new_muto): Actually use a muto for the "buffer".
* Makefile.in: Fix a dependency.
* debug.cc (iscygthread): New function.
* debug.h: Declare it.
* exceptions.cc (set_process_mask): Flush pending signals.
(handle_sigsuspend): No need to flush pending signals.
(call_handler): Refine previous tests of muto ownership. Only clear wait()'s
when we have definitely responded to a signal.
* fhandler_console.cc (fhandler_console::read): Don't set EINTR if executing in
a "cygwin" thread.
* sigproc.cc (proc_subproc): Use second argument to control whether CLEARWAIT
actually sets "signalled" flag.
* sync.h (muto): Add 'unstable' method.
interruptible.
(call_handler): Avoid suspending a thread if it owns a mutex. Only set
signal_arrived if the thread was actually interrupted.
(events_init): Initialize module information needed by interruptible().
(sigdelayed): Don't call sig_dispatch_pending since it could screw up
* init.cc (dll_entry): Record module handle of main for use by interruptible().
(proc_subproc): Reorganize handling of terminated child so that the bulk of the
processing comes from the signal thread.
(wait_sig): Force processing of waiting threads if SIGCHLD is not processed.
* sync.cc (muto::release): Set tid == 0 after lock is released or signal
processor will be confused.
Christopher Faylor
Corinna Vinschen
Robert Collins
Pierre Humblet
Thomas Pfaff
DJ Delorie