DWORD has different types on 32 and 64 bit. Use a common cast to
unsigned long to use %lu format for DWORD values throughout.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
These are updates to wire into the build tree the new tools profiler and
gmondump, and to supply documentation for the tools.
The documentation for profiler and ssp now mention each other but do not
discuss their similarities or differences. That will be handled in a
future update to the "Profiling Cygwin Programs" section of the Cygwin
User's Guide, to be supplied.
This new tool was formerly part of 'profiler' but was spun out thanks to
Jon T's reasonable review comment. Gmondump is more of a debugging tool
than something users might have need for. Users would more likely use
gprof to make use of symbolic info like function names and source line
numbers.
The new tool formerly known as cygmon is renamed to 'profiler'. For the
name I considered 'ipsampler' and could not think of any others. I'm open
to a different name if any is suggested.
I decided that a discussion of the pros and cons of this profiler vs the
existing ssp should probably be in the "Profiling Cygwin Programs" section
of the Cygwin User's Guide rather than in the help for either. That
material will be supplied at some point.
CONTEXT buffers are made child-specific and thus thread-specific since
there is one profiler thread for each child program being profiled.
The SetThreadPriority() warning comment has been expanded.
chmod() works on Cygwin so the "//XXX ineffective" comment is gone.
I decided to make the "sample all executable sections" and "sample
dynamically generated code" suggestions simply expanded comments for now.
The profiler program is now a Cygwin exe rather than a native exe.
The Linux man page for cfsetspeed(3) specifies that the speed argument
must be one of the constants Bnnn (e.g., B9600) defined in termios.h.
But Linux in fact allows the speed to be the numerical baud rate
(e.g., 9600). For consistency with Linux, we now do the same.
Addresses: https://cygwin.com/pipermail/cygwin/2021-July/248887.html
The default PSAPI_VERSION is controlled by WIN32_WINNT, which we set to
0x0a00 when building utils since 48a76190 (and is the default in w32api
>= 9.0.0)
In order for the built executables to run on Windows Vista, we must also
define PSAPI_VERSION as 1 (otherwise '#define GetModuleFileNameExA
K32GetModuleFileNameExA' causes a 'The procedure entry point
K32GetModuleFilenameExA could not be located in the dynamic link library
kernel32.dll' error at run time).
Also drop uneeded psapi.h from dlfcn.cc (31ddf45d), resource.cc
(34a6eeab) and ps.cc (1def2148).
Use <cmdsynopsis> element markup in utils docbook documentation, rather
than some preformatted text inside <screen>.
(This didn't happen as part of 646745cb, when we first started using
refentry elements to make it possible to generate manpages)
This helps produce better looking manpages:
* uses bold (for command names) and italic (for replaceable items)
* different output formats inconsistently treat tabs inside <screen>
(so we have to be careful to not use them in that preformatted text)
Also clean up various issues:
* Replace '[OPTIONS]' with a real synopsis of the options
* Consistently use 'ITEM...' rather than 'ITEM1 [ITEM2...]' for an item
which should appear 1 or more times (cygcheck -f, getfacl, kill)
* Consistently document the '-h | -V' invocation form
* Since replaceable items are now marked up so they have some formatting
indicating they are replaceable, we can drop wrapping them in angle
brackets, as is done in some places
* Add missing '-W' and '-p PID' options to ps synopsis
* Adjust cygpath synopsis to show that only one 'System information'
option is allowed, possibly modified by -A
Future work:
* Sync up the actual help emitted by the util, where it's been improved
* Also don't use <screen> for formatting 'OPTIONS' section of manpage
* pldd inconsistently uses '-?' rather than '-h'!
* Drop duplicate 'Options:' headers (mkgroup, mkpassword)
* Add missing indication that MACHINE is optional with -L (mkgroup, mkpassword)
* Tweak some <refpurpose> which try to be a synopsis, rather than a decription (passwd, ssp)
* Drop some stray '\n' in setfacl options
* Move 'Original Author' note in ssp to an AUTHORS section
* Use <para> to improve formatting of tzset manpage
xterm 368 and mintty 3.5.1 implement a new feature to support
notification of terminal scaling via font zooming also if the terminal
text dimensions (rows/columns) stay unchanged, using
ioctl(TIOCSWINSZ), raising SIGWINCH;
this patches cygwin to support that scenario
The new GetFinalPathNameW handling for native symlinks in inner path
components is disabled if caller doesn't want to follow symlinks, or
doesn't want to follow reparse points.
The check for a file or dir within /dev/mqueue is accidentally using
the incoming path, which could be a relative path. Make sure to
restore the absolute POSIX path in path_copy and only then test the
path.
Also, move the actual check for a valid path below /dev/mqueue into
the fhandler_mqueue class.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
/dev has been handled as virtual dir in cwdstuff, thus not allowing
to start native apps from /dev as CWD, even if /dev actually exists
on disk. Unfortunately this also affects Cygwin executables started
from a debugger.
When chdir'ing to /dev, check if /dev exists on disk. If so, treat
it as any other existing path.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
reuse fhandler_virtual implementation to implement read and lseek.
The output from read(2) is modelled after the output when reading
from an mq file on Linux.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The POSIX entry points are just wrappers now, calling into
fhandler_mqueue. While at it, eliminate mqi_flags, replace with
standard fhandler nonblocking flag.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The mq_open call is just a framework now. This patch moves the
entire functionality into fhandler_mqueue. To support standard
OS calls (as on Linux), make fhandler_mqueue a derived class from
fhandler_disk_file and keep the base handle the handle to the
default stream, to allow implementing O_PATH functionlaity as well
as reading from the file and NOT reading binary message queue data.
Implement a standard fhandler_mqueue::open method, allowing, for
instance, to touch a file under /dev/mqueue and if it doesn't exist,
to create a message queue file.
FIXME: This introduces a BAD HACK into path_conv::check, which needs
reviewing.
Keep the posix path intact in the fhandler, and change get_proc_fd_name
accordingly to return only the basename plus leading slash for
/proc/<PID>/fd.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
POSIX message queues will be moved into NTFS streams.
Extend get_nt_native_path to provide a filename suffix which is not
subject to special character transposition, to allow specifying
a colon.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The default PSAPI_VERSION is controlled by WIN32_WINNT, which we set to
0x0a00 when building ldd, which gets PSAPI_VERSION=2.
This causes K32GetModuleFileNameEx to be used for GetModuleFileNameEx,
which isn't available on Windows Vista.
Define PSAPI_VERSION as 1 for the built executable to work on Windows
Vista.
This encapsulated creation, duplication, and closing of all
Windows objects connected to the message queue in the fhandler.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The function evaluating correctness of ipc object names was a
bit half-hearted. Fix the tests to follow more closely the
desriptions in the Linux man pages.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
build_fh_dev can take the POSIX object name as parameter anyway,
so use that and drop from mqinfo call.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Drop creating a unique ID, the queue name itself is already
unique. This allows to move ipc object generation into the
fhandler in the next step.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
So far, the mqd_t type returned a pointer to an allocated
area under the hood. The mutex and event objects attached
to the message queue were implemented as inheritable types.
As unfortunate side effect the HANDLEs to these objects
were inherited by exec'd child processes, even though all
other message queue properties are not inherted, per POSIX.
Fix this by converting an mqd_t to a descriptor, and create a
matching fhandler_mqueue object to handle various aspects of
the message queues inside the fhandler. Especially, create the
IPC objects as non-inheritable and duplicate the HANDLEs as
part of the fixup_after_fork mechanism.
Drop using mmap and create the memory map with NT functions.
This allows to control duplication of handle and mapping in the
forked child process, without the requirement to regenerate the
map in the same spot. It also allows to dup() the descriptor,
as on Linux, albeit this isn't implemented yet.
This patch is the first cut. There's a bit more to do, like
moving more functionality from the POSIX functions into the
fhandler and making sure the mqd_t type can't be used in other
descriptor-related functions willy-nilly.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Corinna Vinschen
Mark Geisert
Ken Brown
Jon Turney
Thomas Wolff
Jeremy Drake
Brian Inglis
Takashi Yano
Christian Franke