Renumber cluase 4 to 3, per what everybody else did when BSD granted
them permission to remove clause 3. My insistance on keeping the same
numbering for legal reasons is too pedantic, so give up on that point.
Submitted by: Jan Schaumann <jschauma@stevens.edu>
Pull Request: https://github.com/freebsd/freebsd/pull/96
Split the QUEUE_MACRO_DEBUG into QUEUE_MACRO_DEBUG_TRACE and
QUEUE_MACRO_DEBUG_TRASH.
Add the debug macrso QMD_IS_TRASHED() and QMD_SLIST_CHECK_PREVPTR().
Document these in queue.3.
Reviewed by: emaste
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D3984
Add two new macros, SLIST_CONCAT and LIST_CONCAT. Note in both the
queue.h header file and in the queue.3 manual page that they are O(n) so
should be used only in low-usage paths with short lists (otherwise an
STAILQ or TAILQ should be used).
Reviewed by: kib
Make the system queue header file fully usable within C++ programs by
adding macros to define class lists.
This change is backwards compatible for all use within C and C++
programs. Only C++ programs will have added support to use the queue
macros within classes. Previously the queue macros could only be used
within structures.
The queue.3 manual page has been updated to describe the new
functionality and some alphabetic sorting has been done while
at it.
Differential Revision: https://reviews.freebsd.org/D2745
PR: 200827 (exp-run)
MFC after: 2 weeks
Add new FOREACH_FROM variants of the queue(3) FOREACH macros which can
optionally start the traversal from a previously found element by
passing the element in as "var". Passing a NULL "var" retains the same
semantics as the regular FOREACH macros.
Kudos to phk for suggesting the "FROM" suffix instead of my original
proposal.
Reviewed by: jhb (previous version), rpaulo
MFC after: 1 week
Renumber cluase 4 to 3, per what everybody else did when BSD granted
them permission to remove clause 3. My insistance on keeping the same
numbering for legal reasons is too pedantic, so give up on that point.
Submitted by: Jan Schaumann <jschauma@stevens.edu>
Pull Request: https://github.com/freebsd/freebsd/pull/96
For example, the FreeBSD GCC (4.2.1) has a spotty support for that
feature. If the static keyword is used with an unnamed array parameter
in a function declaration, then the compilation fails with:
error: static or type qualifiers in abstract declarator
The feature does work if the parameter is named.
So, the restriction introduced in this commit can be removed when all
affected function prototypes have the workaround.
MFC after: 1 week
Sponsored by: Panzura
For consistency with the qualifiers added in r310977, define a new
qualifier _Null_unspecified which is also defined in clang 3.7+.
Add two new macros:
__NULLABILITY_PRAGMA_PUSH
__NULLABILITY_PRAGMA_POP
These are for use in headers when we want avoid noisy warnings if
some pointers are left without nullability annotations.
These are added with way ahead of their first use to teach the GCC
ports headers of their existance before their first use.
This was meant to be used by a future FORTIFY_SOURCE implementation.
Probably for good, FORTIFY_SOURCE and this particular GCCism were never
well supported by clang or other compilers. Furthermore, the technology
has long since been replaced by either static checkers, sanitizers, or
even just the strong stack protector that was enabled by default.
Drop __gnu_inline to avoid cluttering the headers.
MFC after: 5 days
Add two new qualifiers for use by the static checkers:
_Nonnull
The _Nonnull nullability qualifier indicates that null is not a meaningful
value for a value of the _Nonnull pointer type.
_Nullable
The _Nullable nullability qualifier indicates that a value of the
_Nullable pointer type can be null.
These were introduced in Clang 3.7. For more information, see:
http://clang.llvm.org/docs/AttributeReference.html#nonnull
We add these now without using them so that the GCC ports have time to
pick up the header change.
Hinted by: Android Bionic libc [1]
Also seen in: Apple's Libc-1158.20.4
[1]
baa2a973bd
C99 allows array function parameters to use the static keyword for their
sizes. This tells the compiler that the parameter will have at least the
specified size, and calling code will fail to compile if that guarantee is
not met. However, this syntax is not legal in C++.
This commit reverts r300824, which worked around the problem for
sys/md5.h only, and introduces a new macro: min_size(). min_size(x) can
be used in headers as a static array size, but will still compile in C++
mode.
Reviewed by: cem, ed
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D8277
fix a typo in __STDC_VERSION__ in __min_size requirements
MFC after: 1 week
Sponsored by: Panzura
It clashes with the one in libc++'s <atomic> header.
(Previously, the _Atomic() macro was defined in <stdatomic.h>, which is
only for use with C11, but for various reasons it was moved to its
current location in r251804.)
Discussed with: bdrewery, ed
MFC after: 2 weeks
Some architectures like ARM encode the short enum option state in the
object file and the linker checks that this option is consistent for all
objects of an executable. In case applications use -fno-short-enums,
then this leads to linker warnings. Use the enum __packed attribute for
the relevent enums to avoid the -fshort-enums compiler option. This
attribute is at least available on GCC, LLVM/clang and the Intel
compiler.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
The locale_t type is provided by <xlocale.h> on Linux, FreeBSD, and Darwin.
While, like on some of those systems, it is automatically included by
<locale.h> with the proper feature test macros, its presence under this
particular name is still presumed in real-world software.
Signed-off-by: Yaakov Selkowitz <yselkowi@redhat.com>
Problem:
After passing locales created by 'duplocale' to 'uselocale',
referencing 'MB_CUR_MAX', which is actually expanded to
'__locale_mb_cur_max()' by preprocessors, causes segmentation faults.
Direct use of locales from 'newlocale' does not cause the problem.
This is the problem of 'duplocale'.
$ echo $LANG
ja_JP.UTF-8
$ cat test.c
#include <stdlib.h>
#include <locale.h>
volatile int var;
int main(void) {
locale_t const loc = newlocale(LC_ALL_MASK, "", NULL);
locale_t const dup = duplocale(loc);
locale_t const old = uselocale(dup);
var = MB_CUR_MAX; /* <-- crashes here */
uselocale(old);
freelocale(dup);
freelocale(loc);
return 0;
}
$ gcc test.c
$ ./a
Segmentation fault (core dumped)
# Note: "core dumped" in the above message was actually written in
# Japanese, but I translated the part to post a mail in English.
Bug:
In the beginning of '__loadlocale' (newlib/libc/locale/locale.c:501),
there is a code which checks if the operations can be skipped:
> /* Avoid doing everything twice if nothing has changed. */
> if (!strcmp (new_locale, loc->categories[category]))
> return loc->categories[category];
While, in the function '_duplocale_r' (newlib/libc/locale/
duplocale.c), '__loadlocale' is called as in the quoted codes:
> /* If the object is not a "C" locale category, copy it. Just call
> __loadlocale. It knows what to do to replicate the category. */
> tmp_locale.lc_cat[i].ptr = NULL;
> tmp_locale.lc_cat[i].buf = NULL;
> if (!__loadlocale (&tmp_locale, i, tmp_locale.categories[i]))
> goto error;
This call of '__loadlocale' results in the skip check being
!strcmp(tmp_locale.categories[i], tmp_locale.categories[i]),
which is always true. This means that the actual operations of
'__loadLocale' will never be performed for 'duplocale'.
Fix:
The call of '__loadlocale' in '_duplocale_r' is modified.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Teach makedocbook how to handle some new things seen in the makedoc markup
since bd547490:
- struct lines appearing in the synopsis
- use of @strong{} texinfo markup
At the moment when targeting bare-metal targets or systems without
definition for the locking primitives newlib, uses dummy empty macros.
This has the advantage of reduced size and faster implementation but
does not allow the application to retarget the locking routines.
Retargeting is useful for a single toolchain to support multiple systems
since then it's only at link time that you know which system you are
targeting.
This patch adds a new configure option
--enable-newlib-retargetable-locking to use dummy empty functions
instead of dummy empty macros. The default is to keep the current
behavior to not have any size or speed impact on targets not interested
in this feature. To allow for any size of lock, the _LOCK_T type is
changed into pointer to struct _lock and the _init function are tasked
with allocating the locks. The platform being targeted must provide the
static locks. A dummy implementation of the locking routines and static
lock is provided for single-threaded applications to link successfully
out of the box.
To ensure that the behavior is consistent (either no locking whatsoever
or working locking), the dummy implementation is strongly defined such
that a partial retargeting will cause a doubly defined link error.
Indeed, the linker will only pull in the file providing the dummy
implementation if it cannot find an implementation for one of the
routine or lock.
Newlib build system defines __SINGLE_THREAD__ to allow concurrency code
to be only compiled when newlib is configured for multithread. One such
example are locks which become useless in single thread mode. Although
most static locks are indeed guarded by !defined(__SINGLE_THREAD__),
some are not.
This commit adds these missing guards to __dd_hash_mutex,
__atexit_recursive_mutex, __at_quick_exit_mutex and __arc4random_mutex.
It also makes sure locking macros in lock.h are noop in single thread
mode.
In preparation for the patch that would allow retargeting of locking
routines, rename all lock objects to follow this pattern:
"__<name>_[recursive_]mutex".
Following locks were renamed:
__dd_hash_lock -> __dd_hash_mutex
__sfp_lock -> __sfp_recursive_mutex
__sinit_lock -> __sinit_recursive_mutex
__atexit_lock -> __atexit_recursive_mutex
_arc4random_mutex -> __arc4random_mutex
__env_lock_object -> __env_recursive_mutex
__malloc_lock_object -> __malloc_recursive_mutex
__atexit_mutex -> __at_quick_exit_mutex
__tz_lock_object -> __tz_mutex
In patch b219285f87 you have a syntax
error in the PLD instruction. The syntax for the pld argument should be
in square brackets as it's a memory address like so: pld [r1]. With
your patch the newlib build fails for armv7-a targets. This patch fixes
the build failures.
Tested by making sure the newlib build completes successfully.
2016-01-26 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
* libc/machine/arm/strcpy.c (strcpy): Fix PLD assembly syntax.
* libc/machine/arm/strlen-stub.c (strlen): Likewise.
LTO can re-order top-level assembly blocks, which can cause this
macro definition to appear after its use (or not at all), causing
compilation failures. On modern toolchains (armv4t+), assembly
should write `bx lr` in all cases, and linkers will transparently
convert them to `mov pc, lr`, allowing us to simply remove the
macro.
(source: https://groups.google.com/forum/#!topic/comp.sys.arm/3l7fVGX-Wug
and verified empirically)
For the armv4.S file, preserve this macro to maximize backwards
compatibility.
LTO can re-order top-level assembly blocks, which can cause this
macro definition to appear after its use (or not at all), causing
compilation failures. As the macro has very few uses, simply removing
it by inlining is a simple fix.
n.b. one of the macro invocations in strlen-stub.c was already
guarded by the relevant #define, so it is simply converted directly
to a pld
Remove stray commas. Include <sys/cdefs.h> for __restrict (includes
<stddef.h> indirectly).
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Hi,
With the patch to allow newlib's locking routine to be retargeted currently
under discussion, we need to start thinking of locks as part of newlib's ABI
since newlib depends on specific names being provided by the OS. This patch
renames 2 locks so that they follow the same naming convention as other locks.
It needs to be applied before the retargeting patch, while locks are still an
internal consideration.
Newlib builds successfully with this change.
Ok for master branch?
Best regards,
Thomas
Provide an extension NL_LOCALE_NAME() macro, with semantics
matching glibc, which can be used as:
nl_langinfo_l(NL_LOCALE_NAME(LC_MESSAGES), locale);
to get back the locale string that locale was originally
created with during newlocale(). This in turn allows a library
(such as gettext) to determine what thread-local locale settings
it has inherited from the main program without having to be told
what parameters were passed to newlocale(), for less overall
coupling between parts of the program.
gnulib is set up to use the extension:
https://lists.gnu.org/archive/html/bug-gnulib/2017-01/msg00129.html
* libc/include/langinfo.h (NL_LOCALE_NAME): New macro
* libc/locale/nl_langinfo.c (nl_langinfo_l): Expose locale names
of a locale_t's category components.
Signed-off-by: Eric Blake <eblake@redhat.com>
A few files were missing headers for memset/malloc, likely missed
because the files don't directly call the functions, rather they
come in via macros in libc/include/sys/reent.h:
#define _REENT_CHECK(var, what, type, size, init) do { \
struct _reent *_r = (var); \
if (_r->what == NULL) { \
_r->what = (type)malloc(size); \
#define _REENT_CHECK_ASCTIME_BUF(var) \
_REENT_CHECK(var, _asctime_buf, char *, _REENT_ASCTIME_SIZE, \
memset((var)->_asctime_buf, 0, _REENT_ASCTIME_SIZE))
Without these fixes, implicit function signatures are provided,
which gcc warns could cause aliasing issues down the line:
../../../../../../../newlib-2.5.0/newlib/libc/time/asctime.c:62:3: warning: type of 'memset' does not match original declaration [-Wlto-type-mismatch]
/Volumes/code/external/newlib-cygwin/newlib/libc/include/string.h:29:7: note: return value type mismatch
_PTR _EXFUN(memset,(_PTR, int, size_t));
^
/Volumes/code/external/newlib-cygwin/newlib/libc/include/string.h:29:7: note: 'memset' was previously declared here
/Volumes/code/external/newlib-cygwin/newlib/libc/include/string.h:29:7: note: code may be misoptimized unless -fno-strict-aliasing is used
../../../../../../../newlib-2.5.0/newlib/libc/time/asctime.c:62:3: warning: type of 'malloc' does not match original declaration [-Wlto-type-mismatch]
/Volumes/code/external/newlib-cygwin/newlib/libc/include/malloc.h:37:13: note: return value type mismatch
extern _PTR malloc _PARAMS ((size_t));
^
/Volumes/code/external/newlib-cygwin/newlib/libc/include/malloc.h:37:13: note: 'malloc' was previously declared here
/Volumes/code/external/newlib-cygwin/newlib/libc/include/malloc.h:37:13: note: code may be misoptimized unless -fno-strict-aliasing is used
../../../../../../../newlib-2.5.0/newlib/libc/time/lcltime.c:58:3: warning: type of 'malloc' does not match original declaration [-Wlto-type-mismatch]
/Volumes/code/external/newlib-cygwin/newlib/libc/include/malloc.h:37:13: note: return value type mismatch
extern _PTR malloc _PARAMS ((size_t));
^
/Volumes/code/external/newlib-cygwin/newlib/libc/include/malloc.h:37:13: note: 'malloc' was previously declared here
/Volumes/code/external/newlib-cygwin/newlib/libc/include/malloc.h:37:13: note: code may be misoptimized unless -fno-strict-aliasing is used
../../../../../../../newlib-2.5.0/newlib/libc/string/strsignal.c:70:3: warning: type of 'malloc' does not match original declaration [-Wlto-type-mismatch]
/Volumes/code/external/newlib-cygwin/newlib/libc/include/malloc.h:37:13: note: return value type mismatch
extern _PTR malloc _PARAMS ((size_t));
^
/Volumes/code/external/newlib-cygwin/newlib/libc/include/malloc.h:37:13: note: 'malloc' was previously declared here
/Volumes/code/external/newlib-cygwin/newlib/libc/include/malloc.h:37:13: note: code may be misoptimized unless -fno-strict-aliasing is used
Including the proper headers elminates the implicit function
signatures and these warnings.
This patch adds further comments to nano-mallocr.c, to more comprehensively
explain how padding works in the malloc_chunk structure.
It was originally discussed in the following thread:
https://sourceware.org/ml/newlib/2017/msg00031.html
2017-01-13 Joe Seymour <joe.s@somniumtech.com>
newlib/
* libc/stdlib/nano-mallocr.c (malloc_chunk, get_chunk_from_ptr)
(nano_malloc): Add comments.
- use of DEBUG flag is non-standard and interferes with other
project's using same flag
- change to be _REENT_CHECK_DEBUG which means the flag is
allowing debugging of _REENT_CHECK macros
- use #ifdef instead of #if
The pthread_setname_np() and pthread_getname_np() are GNU extensions and
provided by glibc.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
As described in nano-mallocr.c, chunks of heap are represented in memory
as a size (of type long), followed by some optional padding containing a
negative offset to size, followed by the data area.
get_chunk_from_ptr is responsible for taking a pointer to the data area
(as returned by malloc) and finding the start of the chunk. It does this
by assuming there is no padding and trying to read the size, if the size
is negative then it uses that as an offset to find the true size.
Crucially, it reads the padding area as a long.
nano_malloc is responsible for populating the optional padding area. It
does so by casting a pointer to an (int *) and writing the negative
offset into it.
This means that padding is being written as an int but read as a long.
On msp430 an int is 2 bytes, while a long is 4 bytes. This means that 2
bytes are written to the padding, but 4 bytes are read from it: it has
only been partially initialised.
nano_malloc is the default malloc implementation for msp430.
This patch changes the cast from (int *) to (long *). The change to
nano_malloc has has been observed to fix a TI Energia project that
had been malfunctioning because malloc was returning invalid addresses.
The change to nano_memalign is based entirely on code inspection.
I've built and tested as follows:
Configured (gcc+newlib) with: --target=msp430-elf --enable-languages=c
gcc testsuite variations:
msp430-sim/-mcpu=msp430
msp430-sim/-mcpu=msp430x
msp430-sim/-mcpu=msp430x/-mlarge/-mdata-region=either/-mcode-region=either
msp430-sim/-mhwmult=none
msp430-sim/-mhwmult=f5series
My testing has shown no regressions, however I don't know if the gcc
testsuite provides sufficient coverage for this patch?
I don't have write access, so if this patch is acceptable after review,
I would appreciate it if someone would commit it for me.
Thanks,
2017-01-XX Joe Seymour <joe.s@somniumtech.com>
newlib/
* libc/stdlib/nano-mallocr.c (nano_malloc): Fix incorrect cast.
(nano_memalign): Likewise.
Add a user-defined name to the self-contained synchronization objects in
order to make system diagnostics, tracing and debugging more user
friendly.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
https://sourceware.org/ml/newlib/2016/msg01139.htmlhttps://gcc.gnu.org/ml/gcc/2016-12/msg00010.html
There is no change if libtool is used.
Some run-time support libraries provided by GCC (e.g. libgomp) use
configure checks to detect certain features, e.g. availability of
thread-local storage. The configure script generates a test program and
tries to compile and link it. It should use target libraries and
startfiles of the build tree if available and not random ones from the
installation prefix for this procedure. The search directories
specified by -B are a bit special, see for_each_path() in gcc.c of the
GCC sources. First a search is performed on all search paths with the
multilib directory appended (if desired), then a second search is
performed on demand with the base directory only. For each multilib
there is a "newlib" subdirectory. This directory is specified by a -B
option for the support libraries. In order to find the newlib artifacts
(ctr0.o, libc.a, libg.a and libm.a) they must be located in a proper
multilib subdirectory withing the build directory.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
RTEMS defined SEM_VALUE_MAX to 32767 unlike other systems like FreeBSD
and glibc. A common value is INT_MAX.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
* libc/stdlib/strtod.c (strtof_l): Set errno to ERANGE when double to
float conversion results in infinity.
(strtof): Likewise.
* libc/stdlib/wcstod.c (wcstof_l): Likewise.
(wcstof): Likewise.
__sinit initialises some common file descriptors as line buffered and
relies on the first users of such FDs to call __smakebuf_r. If
__smakebuf_r realises there's no space for a buffer (malloc returns
NULL), it makes them unbuffered. However, while setting the __SNBF
bit, it doesn't clear the __SLBF bit in the flags. Depending on the
order in which functions check buffering flags in the FD, sometime
they assume it's line buffered (e.g. __sfvwrite_r), trashing
application memory that's not really been allocated to them.
This patch solves the problem by clearing the unbuffered/line buffered
flag when setting the line buffered/unbuffered flag.
In the case of memcpy-armv7m.S being built for a big-endian multilib
(including armv7 without a specific profile), realignment code made
assumptions about the byte ordering being little-endian.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Ensure the Python Lex/Yacc (PLY) cache used by makedocbook is initialized
before it is used by parallelizable rules to make the DocBook XML, as it
appears that these can collide in cache generation, leading to errors.
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
In order to enable proper detection of thread-local storage availability
we have to provide some symbols on ARM.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Turn pthread_spinlock_t into a self-contained object. On uni-processor
configurations, interrupts are disabled in the lock/trylock operations
and the previous interrupt status is restored in the corresponding
unlock operations. On SMP configurations, a ticket lock is a acquired
and released in addition.
See also:
https://devel.rtems.org/ticket/2674
This implementation is simple and efficient. However, this test case of
the Linux Test Project would fail due to call of printf() and sleep()
during spin lock ownership:
https://github.com/linux-test-project/ltp/blob/master/testcases/open_posix_testsuite/conformance/interfaces/pthread_spin_lock/1-2.c
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Provide <memory.h> for all standard Newlib targets and remove
Cygwin-specific header. Most POSIX like systems provide this historic
header.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
The non-standard pthread_yield() function is available at least on
Cygwin, FreeBSD and glibc.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
This makes it possible provide operating system specific types for
<pthread.h>. It is in line with the FreeBSD header file structure and
allows a future cleanup of <pthread.h> to not expose unrelated things
via <sys/types.h> and <unistd.h>. Glibc uses the similar
<bits/pthreadtypes.h> for this purpose.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Add _TICKET_LOCK_INITIALIZER to statically initialize a
_Ticket_lock_Control structure. This makes it possible to embed a
ticket lock in other structures outside of <sys/lock.h>.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Non-default visibility attributes are unsupported on PE/COFF, so don't
use in __hidden definition for Cygwin. Add comment.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The FreeBSD kernel types are not used in Newlib. Provide them via an
external header file to decouple Newlib and FreeBSD updates for RTEMS.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Hi,
make pdf on Ubuntu 16.04 fail with:
newlib/libc/libc.texinfo:9: Missing @endcsname inserted.
After a lot of fiddling the reason appears to be the combination of concept
and function index despite a lack of concept index entries. Arguably texinfo
should not error in that case but here we are, newlib will fail to build its
documentation on some systems because of this. Since libc.texinfo only
contains function index entries this patch simply removes the combination of
indices. It does the same for libm.texinfo which has concept index entries but
no function index entries.
Tested by running make pdf, make dvi, make info and make html successfully.
libc.pdf appears to have only one index as expected.
== Proposed commit message ==
Fix pdf build failure with texinfo 6.1.0 as provided in Ubuntu 16.04. Index
combination in libc.texinfo and libm.texinfo fails because both file have only
one type of index entries. Removing index combination is thus harmless and
solves the problem.
Is this ok for master?
Best regards,
Thomas
Provide __intmax_t and __uintmax_t via <machine/_default_types.h> and
define intmax_t and uintmax_t in <sys/_stdint.h> for FreeBSD
compatibility.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
The original test is broken. It tests for a NULL locale which
isn't just wrong, it simply can't occur at this point due to an
earlier check for a NULL locale string. Thus, the locale info
for a category is never taken from the environment.
Fixes Coverty CID 153467.
Also, add comment.
Also, add some parens for readability.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Update the getconf utility to support the new flag as well as
_PC_POSIX_PERMISSIONS and _PC_POSIX_SECURITY. These were previously
unsupported, probably as an oversight.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
_ctype_b is defined in ctype_.c as a const char array for non cygwin
targets allowing negative ctype index but as a char array for the same
targets in ctype_.h, giving type conflict at compile time. This is
because the cygwin targets are not treated specially in the latter file.
This patch adds the necessary logic for cygwin targets in ctype_.h.
While both long and long long are 64-bits on x86_64, they are distinct types,
and long was used prior to commit 477463a201.
Changing this breaks the linking of previously compiled C++ functions with
off_t arguments on 64-bit Cygwin with newly compiled code, as the mangling of
long (l) and long long (x) differ.
Signed-off-by: Yaakov Selkowitz <yselkowi@redhat.com>
Keep __ctype_ptr__ available on Cygwin only, for backward compatibility
with existing apps referencing it via the ctype macros.
Otherwise initialize __global_locale.ctype_ptr and __C_locale.ctype_ptr
and use them throughout.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
__C_locale is const. Thus, overwriting the lconv values in __localeconv_l
will try to write to a R/O region. Given the lconv values in __C_locale
are initialized, there's no reason to write them in __localeconv_l at all.
Just return &__C_locale.lconv.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Only access "C" locale using the new __get_C_locale inline function.
Enable __global_locale for !_MB_CAPABLE targets. Accommodate !_MB_CAPABLE
targets in new locale code.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Now that __locale_cjk_lang is an inline function in setlocale.h and
setlocale.h is included, the declaration doesn't make sense.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Change nl_langinfo to nl_langinfo_l using locale given as argument.
Remove outdated TRANSITION_PERIOD_HACK. The codeset is stored in
the locale for quite some time now. For !MB_CAPABLE targets, just
return "US_ASCII" as codeset.
Implement nl_langinfo by calling nl_langinfo_l. Export nl_langinfo_l
from Cygwin DLL and bump minor API version number.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The former __locale_charset always fetched the current locale's charset.
We need the per-locale charset, too, in future. Rename __locale_charset
to __current_locale_charset and change __locale_charset to take a
locale_t as parameter. Accommodate througout.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
This reverts commit 4de8596. It worked around a problem which was
actually introduced by patch 10a30e7 a few weeks ago. Rather than
adding special code to the newlib version of __getreent, the followup
patch reinstantiates the original, Cygwin-only implementation of
__getreent.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Signed-off-by: Stefan Assmann <sassmann@redhat.com>
So far the lib function __getreent always returned _impure_ptr. On Cygwin
this is only correct after _impure_ptr got initialized. The inline
function in include/cygwin/config.h always returns the right _reent ptr,
though.
After introducing per-thread locales, the __getreent function is called
prior to initialization of _impure_ptr (from dll_crt0_0) to access the
locale pointer, which leads to a crash.
Fix the __getreent lib function for Cygwin to return the correct _reent
pointer all the time. Rename inline function to __inline_getreent
and introduce a macro __getreent calling the inline function. Change
the lib function __getreent to call __inline_getreent on Cygwin.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
make pdf on arm-none-eabi targets fails to build after the reorganization in
baf0c9fcb5 to fold is*_l documentation in their
is* counterpart. This is due two issues:
1) newlib/libc/ctype/ctype.tex still including the def file for the long versions
2) missing angle brackets in .c files for some of is*_l functions
This patch fixes the issues and allows make pdf to succeeds.
Using era_info_t and alt_digits_t indiscriminately in strftime and
strftime_l breaks targets not wanting C99 time formats.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
These functions are used from, e.g., nl_langinfo or strftime, so
we need them for all targets. Just return "C" locale category for
non-__HAVE_LOCALE_INFO__ targets.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- Setting the categories strings in tmp_locale short-circuits
__loadlocale. Use a new_categories array instead, just as in
_setlocale_r.
- If we have a base, copy over the *not* defined categories in
category_mask in the first place. Rearrange loop accordingly.
- Free base right in newlocale.
Signed-off by: Corinna Vinschen <corinna@vinschen.de>
Initializing a pointer to struct __locale_t to point to a string "C"
is not such a bright idea in the long run...
Signed-off by: Corinna Vinschen <corinna@vinschen.de>
Add global const __C_locale for reference purposes.
Bump Cygwin API minor number and DLL major version number to 2.6.0.
Signed-off by: Corinna Vinschen <corinna@vinschen.de>
This allows looping through the structs and buffers. Also
rearrange definitions to follow order of LC_xxx values.
Signed-off by: Corinna Vinschen <corinna@vinschen.de>
Don't use global variables. This allows to call loadlocale from
the yet to be created newlocale().
Rename _thr_locale_t to __locale_t (these locales are not restricted
to threads so the name is misleading).
Along these lines, fix _set_ctype to take a __locale_t as parameter.
Signed-off by: Corinna Vinschen <corinna@vinschen.de>
- Remove charset parameter from low level __foo_wctomb/__foo_mbtowc calls.
- Instead, create array of function for ISO and Windows codepages to point
to function which does not require to evaluate the charset string on
each call. Create matching helper functions. I.e., __iso_wctomb,
__iso_mbtowc, __cp_wctomb and __cp_mbtowc are functions returning the
right function pointer now.
- Create __WCTOMB/__MBTOWC macros utilizing per-reent locale and replace
calls to __wctomb/__mbtowc with calls to __WCTOMB/__MBTOWC.
- Drop global __wctomb/__mbtowc vars.
- Utilize aforementioned changes in Cygwin to get rid of charset in other,
calling functions and simplify the code.
- In Cygwin restrict global cygheap locale info to the job performed
by internal_setlocale. Use UTF-8 instead of ASCII on the fly in
internal conversion functions.
- In Cygwin dll_entry, make sure to initialize a TLS area with a NULL
_REENT->_locale pointer. Add comment to explain why.
Signed-off by: Corinna Vinschen <corinna@vinschen.de>
Move all locale category structure definitions into setlocale.h and remove
other headers in locale subdir. Create inline accessor functions for
current category struct pointers and use throughout. Use pointers to
"C" locale category structs by default in __global_locale.
Signed-off by: Corinna Vinschen <corinna@vinschen.de>
Introduce first cut of struct _thr_locale_t used for the locale_t definition.
Introduce global instance called __global_locale used by default.
Introduce internal inline functions __get_global_locale, __get_locale_r,
__get_current_locale.
Remove usage of global variables in favor of accessor functions pointing to
__global_locale for now. Include all local headers in locale subdir from
setlocale.h to get single include for internal locale access.
Introduce __CTYPE_PTR macro to replace direct access to __ctype_ptr__
and use throughout in isxxx functions.
Signed-off by: Corinna Vinschen <corinna@vinschen.de>
_GNU_SOURCE generally enables all features, but in this case the POSIX
requirement to #include <wctype.h> for these is preferred.
Signed-off-by: Yaakov Selkowitz <yselkowi@redhat.com>
This typedef, along with that of FILE in wchar.h, were XSI prior to
inclusion in POSIX.1-2008.
Fixes: https://sourceware.org/ml/newlib/2016/msg00640.html
Signed-off-by: Yaakov Selkowitz <yselkowi@redhat.com>
Many wchar.h functions were never properly guarded; these changes should
make the header fully compliant.
Signed-off-by: Yaakov Selkowitz <yselkowi@redhat.com>
strcmp.S contained invalid guard for code that used barrel-shifter optional
instruction - it was checking for !ARC601 instead of whether barrel shifter
is present. While it is true that ARC601 doesn't have barrel shifter, so
does some other ARC EM configurations.
2016-07-21 Anton Kolesov <Anton.Kolesov@synopsys.com>
* libc/machine/arc/strcmp.S: Fix big endian without barrel shifter.
Signed-off-by: Anton Kolesov <Anton.Kolesov@synopsys.com>
Prealloc instruction may not be present in all HS variants. Hence, use
prefetch instead of prealloc.
newlib/
2016-04-26 Claudiu Zissulescu <claziss@synopsys.com>
* libc/machine/arc/memset-archs.S: Use prefetch.
This file was copied verbatim from FreeBSD and is in sync
with the FreeBSD svn version used by rtems-libbsd.
Signed-off-by: Joel Sherrill <joelemail@rtems.org>
MAXFLOAT, M_PI, and friends date back to at least XPG4v2, so this guard
was incorrect even prior to the feature test macros overhaul.
Signed-off-by: Yaakov Selkowitz <yselkowi@redhat.com>
The _reent members _current_category and _current_locale are not
used at all. _current_locale is set to "C" in various points of
the code but its value is just as unused as _current_category.
This patch redefines these members without changing the size of the
structure to allow for an implementation of per-thread locales per
POSIX-1.2008 (i.e. uselocale and usage of the per-thread locale in
subsequent function calls).
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Add makedocbook, a tool to process makedoc markup and output DocBook XML
refentries.
Process all the source files which are processed with makedoc with
makedocbook as well
Add chapter-texi2docbook, a tool to automatically generate DocBook XML
chapter files from the chapter .texi files. For generating man pages all we
care about is the content of the refentries, so all this needs to do is
convert the @include of the makedoc generated .def files to xi:include of
the makedocbook generated .xml files.
Add skeleton Docbook XML book files, lib[cm].in.xml which include these
generated chapters, which in turn include the generated files containing
refentries, which is processed with xsltproc to generate the lib[cm].xml
Add new make targets to generate and install man pages from lib[cm].xml
Add makedocbook, a tool to process makedoc markup and output DocBook XML
refentries.
Process all the source files which are processed with makedoc with
makedocbook as well
Add chapter-texi2docbook, a tool to automatically generate DocBook XML
chapter files from the chapter .texi files. For generating man pages all we
care about is the content of the refentries, so all this needs to do is
convert the @include of the makedoc generated .def files to xi:include of
the makedocbook generated .xml files.
Add skeleton Docbook XML book files, lib[cm].in.xml which include these
generated chapters, which in turn include the generated files containing
refentries, which is processed with xsltproc to generate the lib[cm].xml
Add new make targets to generate and install man pages from lib[cm].xml
gettimeofday is currently guarded with __MISC_VISIBLE || __XSI_VISIBLE.
However, gettimeofday should be always visible, as in GLibc.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The proper location for these functions has always been <stdio.h>, however
XPG4 and SUSv2 did mandate a duplicate declaration in <unistd.h>. cuserid
was dropped in SUSv3 (it was marked legacy since XPG4) and the ctermid
declaration in <unistd.h> was made optional and obsolete in SUSv4.
Fixes: https://cygwin.com/ml/cygwin/2016-05/msg00002.html
Signed-off-by: Yaakov Selkowitz <yselkowi@redhat.com>
Marcus Shawcroft wrote:
> This patch appears to have been munged by the mail system, can you
> repost as an attachment please.
Sure, I've attached the patch.
Wilco
Add a simple rawmemchr implementation. Use strlen for rawmemchr(s, '\0') as it is the
fastest way to search for '\0', and use memchr with an infinite size for other cases.
This is 3x faster for large sizes.
ChangeLog:
2016-04-22 Wilco Dijkstra <wdijkstr@arm.com>
* newlib/libc/machine/aarch64/Makefile.in: Add rawmemchr.S and
rawmemchr-stub.c.
* newlib/libc/machine/aarch64/Makefile.am: Likewise.
* newlib/libc/machine/aarch64/rawmemchr.S (rawmemchr): Add rawmemchr.
* newlib/libc/machine/aarch64/rawmemchr-stub.c (rawmemchr): Likewise.
The following testcase:
$ cat > test.c <<EOF
#include <sys/select.h>
#include <sys/time.h>
EOF
$ gcc -c test.c
emits the following error:
/usr/include/sys/reent.h:276:3: error: expected specifier-qualifier-list befor
e ‘_fpos64_t’
_fpos64_t _EXFNPTR(_seek64, (struct _reent *, _PTR, _fpos64_t, int));
^
The reason is that the load order from sys/select.h includes sys/_types.h
before sys/config.h has been included from anywhere else. sys/_types.h
defines _fpos64_t only if __LARGE64_FILES is defined, but it never is in
this scenario. So sys/_types.h has to make sure to get the configuration
info by itself.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
2016-04-18 Thomas Preud'homme <thomas.preudhomme@arm.com>
* libc/machine/arm/strlen-stub.c: Check capabilities of architecture
to decide which Thumb implementation to use and fall back to C
implementation for architecture not supporting Thumb mode.
* libc/machine/arm/strlen.S: Likewise.
Add _Thread_queue_Queue::_owner which will be used for the upcomming
priority inheritance implementation and an O(m) independence-preserving
protocol (OMIP) implementation.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Move _Thread_queue_Queue::_Lock to begin of the structure. On RTEMS,
the presence of a lock component in the thread queue structures actually
depends on the build-time RTEMS_SMP configuration option. A move of
this part to the begin of the structure allows an implementation re-use
for the other parts.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
If the passed t pointer is not a null pointer, always assign the return
value to the object it points to, regardless of whether the return value
is an error.
This is what the GNU C Library does, and this is also the expected
behavior according to the latest draft of the C programming language
standard (C11 ISO/IEC 9899:201x WG14 N1570, dated 2011-04-12):
Signed-off-by: Benoît Thébaudeau <benoit@wsystem.com>
Submitted on behalf of Yuriy Kolerov.
newlib/ChangeLog
2016-04-29 Yuriy Kolerov <yuriy.kolerov@synopsys.com>
testsuite/newlib.locale/UTF-8.exp: Don't run if multibyte support is
disabled.
Signed-off-by: Yuriy Kolerov <yuriy.kolerov@synopsys.com>
Signed-off-by: Anton Kolesov <anton.kolesov@synopsys.com>
Provide the following types via <sys/types.h> on RTEMS for FreeBSD
compatibility if __BSD_VISIBLE
* accmode_t,
* cap_rights_t,
* c_caddr_t,
* cpulevel_t,
* fixpt_t,
* lwpid_t,
* uintfptr_t,
* vm_offset_t,
* vm_ooffset_t,
* vm_paddr_t,
* vm_pindex_t, and
* vm_size_t.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Always provide register_t via <sys/types.h> for glibc and BSD
compatibility. Define __BIT_TYPES_DEFINED__ to 1 like glibc for legacy
header files.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
* libc/include/sys/types.h: Fix a comment about Cygwin. Simplify
guarding pthread types against inclusion on Cygwin.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Resurrect <machine/_user_types.h> for use in <sys/types.h>. Newlib
targets may provide an own version of <machine/types.h> in their machine
directory to add custom user types for <sys/types.h>. Check the
_SYS_TYPES_H header guard to prevent a direct include of
<machine/types.h>, since the <machine/types.h> file is a Newlib
speciality.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Introduce <machine/_endian.h> to let target based customization of
<machine/endian.h> via
* _LITTLE_ENDIAN,
* _BIG_ENDIAN,
* _PDP_ENDIAN, and
* _BYTE_ORDER.
defines. Add definitions expected by FreeBSD to
<machine/endian.h> like
* _QUAD_HIGHWORD,
* _QUAD_LOWWORD,
* __bswap16(),
* __bswap32(),
* __bswap64(),
* __htonl(),
* __htons(),
* __ntohl(), and
* __ntohs().
Also, if __BSD_VISIBLE
* LITTLE_ENDIAN,
* BIG_ENDIAN,
* PDP_ENDIAN, and
* BYTE_ORDER.
Targets that define __machine_host_to_from_network_defined in
<machine/_endian.h> must provide their own implementation of
* __htonl(),
* __htons(),
* __ntohl(), and
* __ntohs(),
otherwise a default implementation is provided by <machine/endian.h>.
In case of GCC defines to builtins are used.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
The dummy crt0.c provided by the RTEMS target provides stubs of
symbols which would normally be provided by RTEMS. This patch adds
stubs for posix_memalign() as well as the synchronization methods
prototyped in <sys/lock.h>.
Various FreeBSD source and header files need a typedef __size_t via
<sys/_types.h>. Unfortunately the GCC provided <stddef.h> uses
#if (defined (__FreeBSD__) && (__FreeBSD__ >= 5)) \
|| defined(__DragonFly__) \
|| defined(__FreeBSD_kernel__)
/* __size_t is a typedef on FreeBSD 5, must not trash it. */
#elif defined (__VMS__)
/* __size_t is also a typedef on VMS. */
#else
#define __size_t
#endif
and therefore defines __size_t on Newlib targets which would trash a
__size_t typedef. Include <stddef.h> before <sys/_types.h> in
<sys/types.h> and undefine __size_t in <sys/_types.h> as a workaround.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Include <machine/endian.h> in <sys/types.h> if __BSD_VISIBLE for BSD
compatibility. This is in line with glibc <sys/types.h>.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Add __va_list to <sys/_types.h> for BSD compatibility. In FreeBSD this
typedef is provided by the various architecture-specific
<machine/_types.h> in a copy and paste manner.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Newlib defines defaults for internal types via <sys/_types.h> and uses
<machine/_types.h> to let targets define their own type if necessary.
Previously for example
#ifndef __dev_t_defined
typedef short __dev_t;
#endif
However, the __*_t_defined pattern conflicts with the glibc type guard
pattern for user types, e.g. dev_t in this example. Introduce a
__machine_*_t_defined pattern for internal types (defined by
<machine/_types.h>, used by <sys/_types.h>). For example
#ifndef __machine_dev_t_defined
typedef short __dev_t;
#endif
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
strings.h is the header mandated for these functions in POSIX.1 prior to
2008 (when most of these were removed). The declarations in string.h are
only for BSD compatibility. But when both headers are included, avoid
duplicate declarations.
Also, mark stpcpy and stpncpy as POSIX.1-2008.
Signed-off-by: Yaakov Selkowitz <yselkowi@redhat.com>
Remove off_t typedef from cygwin/types.h thus relying on sys/types.h.
Introduce winsup/cygwin/machine/_types.h and move some types shared
with newlib into it. Get rid of their definition in cygwin/types.h.
Add same handling for __key_t/key_t as for the other types.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Copy definitions of off_t, dev_t, uid_t, and gid_t verbatim from latest
FreeBSD <sys/types.h>.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
This change solves a glibc/BSD compatibility problem.
glibc and BSD use double underscore types for internal types. The Linux
port of Newlib uses some glibc provided internal type definitions which
are not protected by guard defines, e.g. __off_t. To avoid a conflict
Newlib uses single underscore types for some internal types, e.g.
_off_t. However, for BSD compatibility we have to define the internal
types with double underscore names in <sys/_types.h>.
The header file <machine/types.h> is Newlib-specific. It was used
instead of <sys/_types.h> to provide the internal type definitions
_CLOCK_T, _TIME_T_, _CLOCKID_T_, _TIMER_T_, and __suseconds_t. Move
these definitions to <sys/_types.h> (there exist two instances of this
file, one for Linux and one for all other targets). This makes the
_HAVE_SYSTYPES configuration define obsolete (could possibly break the
__RDOS__ target). Use the standard <sys/_types.h> include throughout.
Move __loff_t defintion to default (non-Linux) <sys/_types.h>. Define
it via _off64_t to avoid a dependency on the compiler.
Provide the __off_t definition via default (non-Linux) <sys/_types.h>
based on _off_t for all systems except Cygwin. For Cygwin use _off64_t.
Define off_t via __off_t.
Provide the __pid_t definition via default (non-Linux) <sys/_types.h>.
This prevents a potential __pid_t and pid_t incompatibility. Add BSD
guard defines for pid_t.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Move the kernel dependent parts of <sys/time.h> to new system-specific
header file <machine/_time.h>. Provide an empty default implementation.
Add a specialized implementation for RTEMS.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
This include is not present in default Newlib, glibc and FreeBSD
<sys/param.h>. With it there is now a conflict with <sys/libkern.h>
introduced by ecf453f963.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Each version of SUS specifies a different value for _POSIX_VERSION,
_POSIX2_VERSION, and _XOPEN_VERSION. glibc also changes the value
of the other _POSIX2_ variables but not the _POSIX_* variables.
_POSIX_TIMERS should be set to a version number, not just 1.
The _POSIX_V7_* macros were missing, which was not noticed because
the V6 values were aliased in sysconf (<unistd.h>).
Signed-off-by: Yaakov Selkowitz <yselkowi@redhat.com>
Intel MCU System V ABI are incompartible with i386 System V ABI:
o Minimum instruction set is Intel Pentium ISA minus x87 instructions
o No x87 or vector registers
o First three args are passed in %eax, %edx and %ecx
o Full specification available here:
https://github.com/hjl-tools/x86-psABI/wiki/iamcu-psABI-0.7.pdf
newlib/
* configure.host: Add new ix86-*-elfiamcu target
newlib/libc/include/
* setjmp.h: Change _JBLEN for Intel MCU target
newlib/libc/machine/i386/
* memchr.S: (memchr) Target-specific size-optimized version
* memcmp.S: (memcmp) Likewise
* memcpy.S: (memcpy) Likewise
* memmove.S: (memmove) Likewise
* memset.S: (memset) Likewise
* setjmp.S: (setjmp) Likewise
* strchr.S: (strchr) Likewise
* strlen.S: (strlen) Likewise
newlib/libc/stdlib/
* srtold.c: (__flt_rounds) Disable for Intel MCU
This patch adds the long double functions missing in newlib to Cygwin.
Apart from some self-written additions (exp10l, finite{f,l}, isinf{f,l},
isnan{f,l}, pow10l) the files are taken from the Mingw-w64 math lib.
Minor changes were required, e.g. substitue _WIN64 with __x86_64__ and
fixing __FLT_RPT_DOMAIN/__FLT_RPT_ERANGE for Cygwin.
Cygwin:
* math: New subdir with math functions.
* Makefile.in (VPATH): Add math subdir.
(MATH_OFILES): List of object files collected from building files in
math subdir.
(DLL_OFILES): Add $(MATH_OFILES).
${CURDIR}/libm.a: Add $(MATH_OFILES) to build.
* common.din: Add new functions from math subdir.
* i686.din: Align to new math subdir. Remove functions now commonly
available.
* x86_64.din: Ditto.
* math.h: math.h wrapper to define mingw structs used in some files in
math subdir.
* include/cygwin/version.h: Bump API minor version.
newlib:
* libc/include/complex.h: Add prototypes for complex long double
functions. Only define for Cygwin.
* libc/include/math.h: Additionally enable prototypes of long double
functions for Cygwin. Add Cygwin-only prototypes for dreml, sincosl,
exp10l and pow10l. Explain why we don't add them to newlib.
* libc/include/tgmath.h: Enable long double handling on Cygwin.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Prototypes also added for initstate() and setstate() but they
were not implemented in the shared newlib code.
* newlib/libc/include/cygwin/stdlib.h: Prototypes added.
* winsup/cygwin/include/cygwin/stdlib.h: Prototypes removed.
* newlib/libc/stdlib/random.c: New file.
* newlib/libc/machine/epiphany/machine/stdlib.h: Removed
* newlib/libc/stdlib/Makefile.am: Added random.c.
* newlib/libc/stdlib/stdlib.tex: Added random.def.
* newlib/libc/stdlib/Makefile.in: Regenerated.
GCCs builtin functions are mostly type agnostic and architecture
indepedent. Prefer to use them if available.
* libc/include/math.h (fpclassify, isfinite, isinf, isnan,
isnormal): Use matching GCC builtin functions if built with
GCC 4.4 or later.
(signbit): Use matching GCC builtin functions if built with
GCC 4.0 or later.
(isgreater, isgreaterequal, isless, islessequal, islessgreater,
isunordered): Use matching GCC builtin functions if built with
GCC 2.97 or later.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
__builtin_isinf_sign doesn't reflect the correct return value for NaN
to emulate finite function. Use __builtin_isfinite instead whichg is available
since GCC 4.4 just as __builtin_isinf_sign.
* libm/common/sl_finite.c (finitel): Use __builtin_isfinite.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Infinity returned from strtold is recognized as NaN by GCC builtin
functions. The reason is that ULtox is missing to set a bit.
* libc/stdlib/strtorx.c (ULtox): Set high bit in second word
to create valid Infinity value.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
u_char, u_short, u_int, u_long are BSD-only types. Remove them from
Cygwin headers which are supposed to be used in a non-BSD scenario.
Drop special Cygwin handling of those types in sys/types.h.
newlib:
* libc/include/sys/types.h (u_char,u_short,u_int,u_long): Drop
Cygwin exception.
cygwin:
* fhandler_socket.cc (fhandler_socket::ioctl): Accommodate change
in include/asm/socket.h. Continue using u_long since that's the
MS type here.
* include/asm/socket.h: Since the type given in _IOR/_IOW macros
is only used for its sizeof, replace u_long with equivalent long.
* netdb.h (getnetbyaddr): Fix prototype.
* netinet/ip.h: Replace old BSD-only types with generically defined
old BSD types (u_char -> u_int8_t, etc).
* netinet/tcp.h: Ditto.
* netinet/udp.h: Ditto.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The u_intN_t types are BSD types but sanctioned by POSIX. They are
always defined when using Glibc headers so we follow suit.
newlib:
* libc/include/sys/types.h: Drop outdated __INTTYPES_DEFINED__
macro. Always define u_intN_t types.
cygwin:
* include/cygwin/types.h: Remove definition of u_intN_t types.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
* libc/locale/ldpart.c (split_lines): Don't dereference result
of strchr without checking for NULL pointer first.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
While C++11 was the first version of the standard to use C99 functionality,
TR1 (for C++03) also does, and G++ does not distinguish between C++98 and
C++03, or when TR1 is in use. Therefore, while not strictly correct for
"pure" C++98, enabling C99 for all C++ usage is the simplest solution (and
much better than always using -D_GNU_SOURCE as on Linux).
See thread starting: https://sourceware.org/ml/newlib/2016/msg00297.html
Signed-off-by: Yaakov Selkowitz <yselkowi@redhat.com>
These types are available in SVID as well.
* libc/include/sys/types.h (u_char,u_short,u_int,u_long): Replace
__BSD_VISIBLE with __MISC_VISIBLE.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
_LARGEFILE_SOURCE, which controls only these two functions, is implicitly
defined by _XOPEN_SOURCE >= 500. However, they are also later added to
POSIX.1-2001 (and therefore available by default).
Signed-off-by: Yaakov Selkowitz <yselkowi@redhat.com>
When running RTEMS paravirtualized in user space, the cli/sti instructions
can't be used. But I can't see why they are needed in either user or
supervisor state. Turning the use of them off for RTEMS.
This code is unmodified since the beginning of the repository, so I have
no insight into why it was done. I may even have been the one to add them.
Absolutely no idea except they aren't necessary.
GCC 6.0+ asserts that the memptr argument to the builtin function
posix_memalign is nonnull.
Add the necessary annotation to the prototype and
remove the now unnecessary check to fix a warning.
newlib/Changelog
newlib/libc/include/stdlib.h: Annotate arg to posix_memalign as
non-null.
winsup/cygwin/ChangeLog
malloc_wrapper.cc (posix_memalign): Remove always true nonnull check.
Signed-off-by: Peter Foley <pefoley2@pefoley.com>
newlib:
* libc/stdlib/arc4random.h: Remove Cygwin-specific locking code.
Conditionalize arc4 locking. Check for _ARC4_LOCK_INIT being
undefined to fall back to default implementation.
cygwin:
* include/machine/_arc4random.h: New file.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
commit bb01594897 moved the struct timeval
declaration from <sys/time.h> to <sys/_timeval.h>, and commit
01885f533d changed <sys/select.h> to include
<sys/_timeval.h>. Therefore, sparc64's own struct timeval needs to be
moved accordingly in order to avoid a conflict from the generic type.
Signed-off-by: Yaakov Selkowitz <yselkowi@redhat.com>
Acked-by: Corinna Vinschen <vinschen@redhat.com>
sparc64 has a number of its own headers which override the generic ones.
These too need to use feature test macros properly.
These changes correspond to the generic fcntl.h and sys/stat.h changes
in commit d2df6d381b and
commit 069e400c91.
Signed-off-by: Yaakov Selkowitz <yselkowi@redhat.com>
Acked-by: Corinna Vinschen <vinschen@redhat.com>
Move the sig*set macros following the functions inside their feature
test macro conditional.
This fixes the build on bare-metal targets following
commit 5c78499ae2.
Signed-off-by: Yaakov Selkowitz <yselkowi@redhat.com>
Acked-by: Corinna Vinschen <vinschen@redhat.com>
In file included from libc/sys/arm/crt0.S:2:0:
libc/sys/arm/arm.h:32:25: fatal error: acle-compat.h: No such file or directory
acle-compat.h is libc/machine/arm.
Signed-off-by: Yaakov Selkowitz <yselkowi@redhat.com>
According to the OpenBSD man page, "A Replacement Call for Random". It
offers high quality random numbers derived from input data obtained by
the OpenBSD specific getentropy() system call which is declared in
<unistd.h> and must be implemented for each Newlib port externally. The
arc4random() functions are used for example in LibreSSL and OpenSSH.
Cygwin provides currently its own implementation of the arc4random
family. Maybe it makes sense to use this getentropy() implementation:
http://cvsweb.openbsd.org/cgi-bin/cvsweb/src/lib/libcrypto/crypto/getentropy_win.c?rev=1.4&content-type=text/x-cvsweb-markup
* libc/include/stdlib.h (arc4random): Declare if __BSD_VISIBLE.
(arc4random_buf): Likewise.
(arc4random_uniform): Likewise.
* libc/include/sys/unistd.h (getentropy): Likewise.
* libc/include/machine/_arc4random.h: New file.
* libc/stdlib/arc4random.c: Likewise.
* libc/stdlib/arc4random.h: Likewise.
* libc/stdlib/arc4random_uniform.c: Likewise.
* libc/stdlib/chacha_private.h: Likewise.
* libc/sys/rtems/include/machine/_arc4random.h: Likewise.
* libc/stdlib/Makefile.am (EXTENDED_SOURCES): Add arc4random.c
and arc4random_uniform.c.
* libc/stdlib/Makefile.in: Regenerate.
This function is used by LibreSSL and OpenSSH and is provided by the
OpenBSD libc.
* libc/include/string.h (timingsafe_memcmp): Declare.
* libc/string/timingsafe_memcmp.c: New file.
* libc/string/Makefile.am: Add new file.
* libc/string/Makefile.in: Regenerate.
This function is used by LibreSSL and OpenSSH and is provided by the
OpenBSD libc.
* libc/include/string.h (timingsafe_bcmp): Declare.
* libc/string/timingsafe_bcmp.c: New file.
* libc/string/Makefile.am: Add new file.
* libc/string/Makefile.in: Regenerate.
This function is used by LibreSSL and OpenSSH and is provided by the
OpenBSD libc.
* libc/include/string.h (explicit_bzero): Declare.
* libc/string/explicit_bzero.c: New file.
* libc/string/Makefile.am: Add new file.
* libc/string/Makefile.in: Regenerate.
This guard is used by FreeBSD <sys/socket.h> for example. The FreeBSD
network stack is used in RTEMS.
* newlib/libc/include/sys/types.h (ssize_t): Guard by
_SSIZE_T_DECLARED.
The u_int/u_char/etc. BSD types are needed by Cygwin's netinet/*.h
headers, so they always need to be available.
Signed-off-by: Yaakov Selkowitz <yselkowi@redhat.com>
The inclusion of <sys/select.h> is required also by POSIX.1-2001.
setitimer is XSI, and futimesat is GNU.
Signed-off-by: Yaakov Selkowitz <yselkowi@redhat.com>
Replace all !_POSIX_SOURCE with BSD. All *at functions depend on
ATFILE; futimens is POSIX.1-2008.
Signed-off-by: Yaakov Selkowitz <yselkowi@redhat.com>
Throughout, use proper internal macros for functions, including those
marked as target-specific. Use ATFILE for all *at functions.
Signed-off-by: Yaakov Selkowitz <yselkowi@redhat.com>
Throughout, remove __STRICT_ANSI__ and use the proper internal macros.
bcmp, bcopy, bzero, index, and rindex were in POSIX prior to 2008.
memrchr is GNU.
strdup and strndup are POSIX.1-2008.
The int-returning form of strerror_r is POSIX.1-2001.
Signed-off-by: Yaakov Selkowitz <yselkowi@redhat.com>
Throughout, simplify the C99/C11 conditionals, and replace
__STRICT_ANSI__ with the proper internal POSIX macros. The _*_r
reentrant functions need not be guarded (and most haven't been) because
such names in the global scope are reserved to the implementation.
atoff is unique to newlib.
dtoa is not actually exported (_dtoa_r is used internally), is
nonstandard, and the declaration conflicts with the code included in
MySQL, NSPR, and SpiderMonkey.
mktemp was removed in POSIX.1-2001.
The qsort_r declarations are reordered so that the GNU version retains
precedence.
Signed-off-by: Yaakov Selkowitz <yselkowi@redhat.com>
Throughout, remove references to __STRICT_ANSI__ and use the proper
internal macros and versions for C99, POSIX, ATFILE for the various *at
functions, or LARGEFILE for fseeko and ftello.
[v]asprintf are GNU extensions, but the *iprintf, *iscanf, and
*asnprintf functions are unique to newlib.
getw and putw were removed from POSIX.1-2001. funopen is BSD, and
fopencookie is GNU.
Signed-off-by: Yaakov Selkowitz <yselkowi@redhat.com>
Use proper internal macros for BSD sig_t and GNU sighandler_t.
sigaltstack and friends are XSI even in SUSv4 but in glibc are
nonetheless handled as POSIX.1-2008 (not 2001).
The requirement for the ucontext_t typedef in signal.h was XSI prior to
POSIX.1-2008.
Signed-off-by: Yaakov Selkowitz <yselkowi@redhat.com>
Simplify the C99 conditionals. Mark the drem and gamma functions as
BSD|SVID, the Bessel double functions also XSI and the floats also SUSv3.
signgam is BSD|SVID|XSI, and matherr is SVID. Finally, use the internal
macros to control the symbolic constants.
Signed-off-by: Yaakov Selkowitz <yselkowi@redhat.com>
_PATH_GROUP is a BSDism. getgr*_r are BSD|SVID|POSIX, and the *grent
functions are BSD|SVID|XPG4v2.
Signed-off-by: Yaakov Selkowitz <yselkowi@redhat.com>
Most of the !_POSIX_SOURCE code is BSD, although ironically some were
added to POSIX.1-2001.
Use the ATFILE conditional for most of the *at functions, except
futimesat which is GNU.
Signed-off-by: Yaakov Selkowitz <yselkowi@redhat.com>
MAXNAMLEN is a BSDism.
Use the proper internal macros instead of !_POSIX_SOURCE. telldir and
seekdir are XSI, scandir and alphasort are POSIX.1-2008, and scandirat
is GNU.
Signed-off-by: Yaakov Selkowitz <yselkowi@redhat.com>
This is the complete rework of the feature tests macros for better
compatibility with GNU libc, primarily based on the Linux man pages
documentation:
http://man7.org/linux/man-pages/man7/feature_test_macros.7.html
The previous implementation was flawed in its approach that macros were
often used to hide symbols if defined (e.g. !defined __STRICT_ANSI__ or
!defined _POSIX_SOURCE), whereas the approach of glibc is that these macros
make symbols available when defined (e.g. defined _BSD_SOURCE, or as used
internally, #if __BSD_VISIBLE). As much open-source software is written
with glibc in mind, this necessitated patching numerous packages just to
compile.
In particular, __STRICT_ANSI__ (which is defined by gcc -ansi or -std=c*)
was given too much importance. This implementation limits the influence
of __STRICT_ANSI__ to controlling the default when no other feature test
macros are defined, and to the inclusion of <alloca.h> in <stdlib.h> as
documented. These are the only places where __STRICT_ANSI__ should be
tested.
The following macros are now accepted: _ATFILE_SOURCE, _BSD_SOURCE,
_DEFAULT_SOURCE, _ISOC99_SOURCE, _ISOC11_SOURCE, _LARGEFILE_SOURCE,
_SVID_SOURCE, _XOPEN_SOURCE_EXTENDED.
The existing __*_VISIBLE internal macros have been kept mostly
compatible with the original BSD implementation, with some changes to
the criteria which controls them. Several more macros in this style
have been added where needed for concision or accuracy.
Enabling C++11 or newer in the compiler also enables C99 and C11
functions. Doing so should help move away from the need to define
_GNU_SOURCE in g++ for _GLIBCXX_USE_C99 support as on Linux:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=51749
Signed-off-by: Yaakov Selkowitz <yselkowi@redhat.com>
Newlib's setvbuf function is very old and has two bugs:
- It sets the SRD/SWR flags incorrectly in case of files opened for
reading and writing.
See https://cygwin.com/ml/cygwin/2016-03/msg00180.html
for a desription of the effect.
- It always sets the buffer size to BUFSIZ if it's not provided by
the application, independent of the optimal blocksize for the
underlying IO device.
Update setvbuf to latest code from OpenBSD to fix both problems.
* libc/stdio/setvbuf.c (setvbuf): Import latest OpenBSD
implementation.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
To fix a long-standing setvbuf bug, import __swhatbuf function from
OpenBSD and only slightly rearrange for newlib.
* libc/stdio/local.h (__swhatbuf_r): Declare.
* libc/stdio/makebuf (__smakebuf_r): New function.
(__smakebuf_r): Drop file handling code and call __smakebuf_r.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Per the preceeding comment this inline code is disabled since 1993(!)
because of a bug in GCC at the time. This is long gone and the equivalent
inline code is used in the BSDs for quite some time. Enable this code for
newlib as well.
* libc/include/stdio.h (__sputc_r): Enable GCC inline code. Add
handling for targets defining __SCLE.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
* pthread.h: Add prototypes for pthread_condattr_getclock(),
pthread_condattr_setclock(), pthread_setschedpri(),
pthread_getcpuclockid(), pthread_getconcurrency(), and
pthread_setconcurrency(). Also cleaned up file header to
remove CVS Id string.
* sys/types.h: Add clock ID to pthread_condattr_t.
* libc/include/sys/features.h: Set POSIX option macros from 200112L
to 200809L for Cygwin.
(_POSIX_SPAWN): Set to 200809L for Cygwin.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Currently, the newlib version information needs to be updated in two places:
- newlib/acinclude.m4
- newlib/libc/include/sys/features.h
The goal of this patch is to:
- supply a single location for defining the newlib version
information: newlib/acinclude.m4
- define __NEWLIB__, __NEWLIB_MINOR__ and __NEWLIB_PATCHLEVEL__
This is in line with what gcc does for its version macros. See:
https://gcc.gnu.org/onlinedocs/cpp/Common-Predefined-Macros.html
This patch moves the definition of the _NEWLIB_VERSION, __NEWLIB__
and __NEWLIB_MINOR__ macros from newlib/libc/include/sys/features.h,
to the newly generated newlib/_newlib_version.h file. Additionally,
the __NEWLIB_PATCHLEVEL__ macro was created, for completeness.
In order to stay backwards compatible, newlib/_newlib_version.h gets
included by newlib/newlib.h and newlib/libc/include/sys/features.h.
Note: This patch does _not_ include the modifications to the following
files, as these should all be generated any way.
*Makefile.in,
*aclocal.m4,
*configure
stamp-* files
Signed-off-by: Pieter du Preez <pdupreez@gmail.com>
Any attempt to use isnanf, isinff, or finitef from <ieeefp.h> with
GCC 5 on platforms other than SPU result in a "lvalue required as
unary '&' operand" error.
newlib/libc/
* include/ieeefp.h (__ieeefp_isnanf): Remove broken macro.
(__ieeefp_isinff, __ieeefp_finitef): Ditto.
Signed-off-by: Yaakov Selkowitz <yselkowi@redhat.com>
This patch fixes the problem reported in
https://cygwin.com/ml/cygwin/2016-02/msg00014.html
The 2009 changes to handle multibyte decimal point and thousands
separator missed to take the length of a multibyte decimal point into
account when computing the field size.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Current mesa expects stdio.h to prototype fileno() when compiling with gcc
-std=c99 -D_XOPEN_SOURCE
Fix the 'POSIX 1003.1:2001' block in stdio.h to prototype functions if not
__STRICT_ANSI__, or _BSD_SOURCE, _POSIX_C_SOURCE or _XOPEN_SOURCE are defined
appropriately
As far as I can tell, despite being in this block, setbuffer() and setlinebuf()
are BSDisms which aren't in POSIX 1003.1:2001
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Non-reentrant system calls version implies both MISSING_SYSCALL_NAMES
and REENTRANT_SYSCALL_PROVIDED macros to be defined.
Being coupled with --enable-newlib-nano-malloc knob it breaks the build:
bash-4.3$ ../newlib-2.3.0.20160104/configure CC_FOR_TARGET=gcc
AR_FOR_TARGET=ar RANLIB_FOR_TARGET=ranlib CFLAGS_FOR_TARGET="-m32
-DMISSING_SYSCALL_NAMES -DREENTRANT_SYSCALLS_PROVIDED"
--target=i386-elf --enable-newlib-nano-malloc && make
<...omitted output...>
../../../../../../newlib-2.3.0.20160104/newlib/libc/stdlib/nano-mallocr.c:
In function ‘_mallinfo_r’:
../../../../../../newlib-2.3.0.20160104/newlib/libc/stdlib/nano-mallocr.c:489:35:
error: macro "_sbrk_r" requires 2 arguments, but only 1 given
sbrk_now = _sbrk_r(RCALL 0);
^
../../../../../../newlib-2.3.0.20160104/newlib/libc/stdlib/nano-mallocr.c:489:20:
error: ‘_sbrk_r’ undeclared (first use in this function)
sbrk_now = _sbrk_r(RCALL 0);
^
../../../../../../newlib-2.3.0.20160104/newlib/libc/stdlib/nano-mallocr.c:489:20:
note: each undeclared identifier is reported only once for each
function it appears in
Makefile:1512: recipe for target 'lib_a-nano-mallinfor.o' failed
make[8]: *** [lib_a-nano-mallinfor.o] Error 1
In case of non-reentrant system calls _sbrk_r became a macro with TWO
args (defined in reent.h):
#define _sbrk_r(__reent, __incr) sbrk(__incr)
But in our case only one argument is present. (RCALL 0) is considered
as a single argument despite RCALL itself is a macro:)
So intermediate one-arg macro will be enough to expand args before
final _sbrk_r expansion:
#define _SBRK_R(X) _sbrk_r(X)
Here is a patch:
This fixes the build of krb5 and other packages on Cygwin.
* libc/include/grp.h: Use __BSD_VISIBLE and __XSI_VISIBLE guards.
Signed-off-by: Yaakov Selkowitz <yselkowi@redhat.com>
libgloss:
* arm/Makefile.in: Add newlib/libc/machine/arm to the include path if
newlib is present.
* arm/arm.h: Include acle-compat.h.
(THUMB_V7_V6M): Rename to ...
(PREFER_THUMB): This. Use ACLE macros __ARM_ARCH_ISA_ARM instead of
__ARM_ARCH_6M__ to decide whether to define it.
(THUMB1_ONLY): Define for Thumb-1 only targets.
(THUMB_V7M_V6M): Rename to ...
(THUMB_VXM): This. Defined based on __ARM_ARCH_ISA_ARM, excluding
ARMv7.
* arm/crt0.S: Use THUMB1_ONLY rather than __ARM_ARCH_6M__,
!__ARM_ARCH_ISA_ARM rather than THUMB_V7M_V6M for fp enabling, and
PREFER_THUMB rather than THUMB_V7_V6M. Rename other occurences of
THUMB_V7M_V6M to THUMB_VXM.
* arm/linux-crt0.c: Likewise.
* arm/redboot-crt0.S: Likewise.
* arm/swi.h: Likewise.
* arm/trap.S: Likewise.
newlib:
* libc/machine/arm/memcpy-stub.c: Use ACLE macros __ARM_ARCH_ISA_THUMB
and __ARM_ARCH_ISA_ARM to check for Thumb-2 only targets rather than
__ARM_ARCH and __ARM_ARCH_PROFILE.
* libc/machine/arm/memcpy.S: Likewise.
* libc/machine/arm/setjmp.S: Likewise for Thumb-1 only target and
include acle-compat.h.
* libc/machine/arm/strcmp.S: Likewise for Thumb-1 and Thumb-2 only
target and include acle-compat.h.
* libc/sys/arm/arm.h: Include acle-compat.h.
(THUMB_V7_V6M): Rename to ...
(PREFER_THUMB): This. Use ACLE macro __ARM_ARCH_ISA_ARM instead of
__ARM_ARCH_6M__ to decide whether to define it.
(THUMB1_ONLY): Define for Thumb-1 only targets.
(THUMB_V7M_V6M): Rename to ...
(THUMB_VXM): This. Defined based on __ARM_ARCH_ISA_ARM, excluding
ARMv7.
* libc/sys/arm/crt0.S: Use PREFER_THUMB rather than THUMB_V7_V6M and
rename THUMB_V7M_V6M into THUMB_VXM.
* libc/sys/arm/swi.h: Likewise.
If small reent is enabled (_REENT_SMALL is defined) then malloc() was
used in __register_exitproc() even if user requested it to be disabled
(_ATEXIT_DYNAMIC_ALLOC is defined). With this fix, function fails when
_ATEXIT_DYNAMIC_ALLOC is defined and whole static storage is already
used.
2015-12-21 Freddie Chopin <freddie.chopin@gmail.com>
* libc/stdlib/__atexit.c (__register_exitproc): Fix for
_ATEXIT_DYNAMIC_ALLOC.
2015-12-21 Freddie Chopin <freddie.chopin@gmail.com>
* libc/stdlib/on_exit_args.{c,h}: New files.
* libc/stdlib/Makefile.am: Add new source file.
* libc/stdlib/Makefile.in: Regenerate.
* libc/stdlib/__atexit.c (__register_exitproc): Initialize
_on_exit_args_ptr field of _GLOBAL_ATEXIT on first run.
* libc/stdlib/on_exit.c: Force linking of static instance of
_on_exit_args.
* libc/stdlib/cxa_atexit.c: Likewise.
GCC for ARC has been updated to provide consistent naming of preprocessor
definitions for different optional architecture features:
* __ARC_BARREL_SHIFTER__ instead of __Xbarrel_shifter for
-mbarrel-shifter
* __ARC_LL64__ instead of __LL64__ for -mll64
* __ARCEM__ instead of __EM__ for -mcpu=arcem
* __ARCHS__ instead of __HS__ for -mcpu=archs
* etc (not used in newlib)
This patch updates assembly routines for ARC to use new definitions instead
of a deprecated ones. To ensure compatibility with older compiler new
definitions are also defined in asm.h if needed, based on deprecated
preprocessor definitions.
*** newlib/ChangeLog ***
2015-12-15 Anton Kolesov <Anton.Kolesov@synopsys.com>
* libc/machine/arc/asm.h: Define new GCC definition for old compiler.
* libc/machine/arc/memcmp-bs-norm.S: Use new GCC defines to detect
processor features.
* libc/machine/arc/memcmp.S: Likewise.
* libc/machine/arc/memcpy-archs.S: Likewise.
* libc/machine/arc/memcpy-bs.S: Likewise.
* libc/machine/arc/memcpy.S: Likewise.
* libc/machine/arc/memset-archs.S: Likewise.
* libc/machine/arc/memset-bs.S: Likewise.
* libc/machine/arc/memset.S: Likewise.
* libc/machine/arc/setjmp.S: Likewise.
* libc/machine/arc/strchr-bs-norm.S: Likewise.
* libc/machine/arc/strchr-bs.S: Likewise.
* libc/machine/arc/strchr.S: Likewise.
* libc/machine/arc/strcmp-archs.S: Likewise.
* libc/machine/arc/strcmp.S: Likewise.
* libc/machine/arc/strcpy-bs-arc600.S: Likewise.
* libc/machine/arc/strcpy-bs.S: Likewise.
* libc/machine/arc/strcpy.S: Likewise.
* libc/machine/arc/strlen-bs-norm.S: Likewise.
* libc/machine/arc/strlen-bs.S: Likewise.
* libc/machine/arc/strlen.S: Likewise.
* libc/machine/arc/strncpy-bs.S: Likewise.
* libc/machine/arc/strncpy.S: Likewise.
Signed-off-by: Anton Kolesov <Anton.Kolesov@synopsys.com>
Provide a _REENT_INIT_PTR_ZEROED() macro to initialize an already
zero-initialized struct _reent.
* libc/include/sys/reent.h (_REENT_INIT_PTR_ZEROED): New.
(_REENT_INIT_PTR): Define only once and use _REENT_INIT_PTR_ZEROED().
* libc/include/sys/_sigset.h: New.
* libc/include/sys/select.h: Do not include <sys/types.h> and
<sys/time.h> to avoid cyclic header file dependencies. Include
specialized header files instead.
(sigset_t): Conditionally define.
* libc/include/sys/signal.h (sigset_t): Likewise.
* libc/include/sys/time.h: Include <sys/select.h> if
__BSD_VISIBLE.
* libc/include/sys/types.h: Likewise.
In some code paths the __atexit_lock held by this function was not
released when returning with an error.
* libc/stdlib/__atexit.c (__register_exitproc): Always release
lock before return.
Currently, double precision math functions in newlib/libm/machine/arm detect whether neon instructions can be used for double precision computation by checking the architecture version (>= 8) and the availability of floating-point instructions. However, these instructions would not be available if targeting fpv5-sp-d16 as the FPU, which by definition does not have 64bit float instructions. This patch adds a check that __ARM_FP advertises 64bit float instructions.
* libm/machine/arm/s_ceil.c: Also check that 64bit FP instructions are
available in the guard.
* libm/machine/arm/s_floor.c: Likewise.
* libm/machine/arm/s_nearbyint.c: Likewise.
* libm/machine/arm/s_rint.c: Likewise.
* libm/machine/arm/s_round.c: Likewise.
* libm/machine/arm/s_trunc.c: Likewise.
* libc/stdio/freopen.c (_freopen_r): Only reset __SWID bit per SUSv4.
* libc/stdio64/freopen64.c (_freopen64_r): Add missing resetting of
flag values and _mbstate.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
* libc/include/sys/types.h: Move definitions of NBBY and howmany to
sys/param.h. Move definitions of select(2) macros to sys/select.h.
* libc/include/sys/param.h: See above.
* libc/include/sys/select.h: Move Cygwin's sys/select.h here.
* include/sys/select.h: Move select(2) macros from newlib's sys/types.h
here. Rename howmany to _howmany to unclutter namespace. Move file to
newlib.
* libc/rexex.cc: Add declaration for cygwin_gethostname.
* poll.cc: Include sys/param.h and locale select.h.
* select.h (cygwin_select): Declare.
* uname.cc: Declare cygwin_gethostname.
* winsup.h: Drop declarations of cygwin_select and cygwin_gethostname.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Reformulate the strcmp-armv7.S selection logic around the architecture
features required by the implementation code rather (some) version of
the architecture that expose those features.
The patch moves the inline ASM thumb2 -Os implementation out into its
own .S file.
Tested by building newlib and comparing libc.a binaries before and
after for all permutations of:
Architectures:
armv4 armv4t armv5 armv5t armv5te armv6 armv6j armv6k
armv6z armv6kz armv6t2 armv6-m armv6s-m armv7 armv7-a
armv7ve armv7-r armv7-m armv7e-m armv8-a iwmmxt iwmmxt2
ISAs:
thumb arm
Optimization Levels:
Os O2
Excluding:
armv6s-m -mthumb
armv6-m -mthumb
armv6zk -mthumb
armv6z -mthumb
armv6k -mthumb
armv6j -mthumb
- move the description of the alternative form produced with the # flag from a
nested table to an additional table
2015-11-12 Jon Turney <jon.turney@dronecode.org.uk>
* libc/stdio/sprintf.c: Simplify documentation markup.
* libc/stdio/swprintf.c: Ditto.
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
- use bullet points to separate width, size and type sections, rather than using
rows in an enormous table, for consistency with sprintf and swprintf.
- use code markup for size bullet point for consistency
- use a texinfo multitable for description of the size flags, rather than some
preformatted text
- tidy up some whitespace so type flags are all aligned
2015-11-12 Jon Turney <jon.turney@dronecode.org.uk>
* libc/stdio/sscanf.c: Improve documentation markup.
* libc/stdio/swscanf.c: Ditto.
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
The patch moves the inline ASM thumb1 -O2 implementation out into its
own .S file.
Tested by building newlib and comparing libc.a binaries before and
after for all permutations of:
Architectures:
armv4 armv4t armv5 armv5t armv5te armv6 armv6j armv6k
armv6z armv6kz armv6t2 armv6-m armv6s-m armv7 armv7-a
armv7ve armv7-r armv7-m armv7e-m armv8-a iwmmxt iwmmxt2
ISAs:
thumb arm
Optimization Levels:
Os O2
Excluding:
armv6s-m -mthumb
armv6-m -mthumb
armv6zk -mthumb
armv6z -mthumb
armv6k -mthumb
armv6j -mthumb
The patch adds strlen.S to contain the complementary preprocessor
logic to strlen-stub.c intended to provide #inclusion of alternative
.S implementations.
Initially we just include the existing strlen-armv7.S implementation.
We rewrite _ISA_ARMV7 in both strlen.S and strlen-stub.c to use the
underlying existing underlying defintion from arm_asm.h in order to
avoide including that file, this is in effect the first step towards a
move to ACLE predefines only.
Tested by building newlib and comparing libc.a binaries before and
after for all permutations of:
Architectures:
armv4 armv4t armv5 armv5t armv5te armv6 armv6j armv6k
armv6z armv6kz armv6t2 armv6-m armv6s-m armv7 armv7-a
armv7ve armv7-r armv7-m armv7e-m armv8-a iwmmxt iwmmxt2
ISAs:
thumb arm
Optimization Levels:
Os O2
Excluding:
armv6s-m -mthumb
armv6-m -mthumb
armv6zk -mthumb
armv6z -mthumb
armv6k -mthumb
armv6j -mthumb
In order to maintain consistency both within machine/arm and between
machine/arm and machine/aarch64, rename the 'c' stub to -stub.c.
Tested by building newlib and comparing libc.a binaries before and
after for all permutations of:
Architectures:
armv4 armv4t armv5 armv5t armv5te armv6 armv6j armv6k
armv6z armv6kz armv6t2 armv6-m armv6s-m armv7 armv7-a
armv7ve armv7-r armv7-m armv7e-m armv8-a iwmmxt iwmmxt2
ISAs:
thumb arm
Optimization Levels:
Os O2
Excluding:
armv6s-m -mthumb
armv6-m -mthumb
armv6zk -mthumb
armv6z -mthumb
armv6k -mthumb
armv6j -mthumb
This patch flattens the condition code selection used in strlen in an
attempt to make the guarding condition for each alternative
implementation clearer and to structure the logic in a manner that
makes it easier to maintain complementary logic between the
alternative 'C' and assembler implementations.
Tested by building newlib and comparing libc.a binaries before and
after for all permutations of:
Architectures:
armv4 armv4t armv5 armv5t armv5te armv6 armv6j armv6k
armv6z armv6kz armv6t2 armv6-m armv6s-m armv7 armv7-a
armv7ve armv7-r armv7-m armv7e-m armv8-a iwmmxt iwmmxt2
ISAs:
thumb arm
Optimization Levels:
Os O2
Excluding:
armv6s-m -mthumb
armv6-m -mthumb
armv6zk -mthumb
armv6z -mthumb
armv6k -mthumb
armv6j -mthumb
Regression testing newlib in conjunction with libgloss and
--enable-multilib can result in incompatible multilib versions of
newlib and libgloss being used during link.
This manifests on ARM target when newlib regression is run using a
GCC configured using --with-multilib-list=aprofile
With this configuration many of the multilib variants built are
mutually incompatible.
The issue is that the newlib dejagnu foo iterates each multilib
variant and correctly chooses the appropriate newlib variant but
always chooses the root/base libgloss variant.
The implementation of newlib/testsuite/lib/flags.exp contains the
following fragment:
set target_build_path "$objdir/$multibuildtop.."
The effect of this fragment is to explicitly select the root version
of libgloss, irrespective of the current multilib.
Digging around in VC it appears that the original implementation of
multlib magic came into the tree back in 2002 with:
6e9d950a (Thomas Fitzsimmons 2002-05-01 17:06:25 +0000 39)
In this initial version of multilib support, newlib was multilib
capable, but libgloss was not multilib capable, hence the necessity to
explicitly select the root libgloss version.
Subsequently flags.exp was modified to support out of tree testing:
cec1d3b4 (Jeff Johnston 2005-07-05 00:11:50 +0000 25)
This change is orthogonal to this issue, its effect is to exit early
in none multilib configurations.
Subsequently libgloss gained --enable-multilib support, the relevant
change is:
https://sourceware.org/ml/newlib/2006/msg00440.html
commit 00a4b31ad0
Author: Jeff Johnston <jjohnstn@redhat.com>
Date: Wed May 10 20:51:41 2006 +0000
This change enabled multilib support throughout libgloss, but ommitted
to adjust the flag.exp behaviour which anchors the libgloss multilib
selection to the base version.
The attached patch adjusts flags.exp to select the current multilib
variant of libgloss.
2015-11-06 Marcus Shawcroft <marcus.shawcroft@arm.com>
* testsuite/lib/flags.exp (libgloss_link_flags): Drop multilibtop
from target_build_path.
Align makedoc's iscommand() with it's documentation, and don't allow commands to
contain a space. A command is a line containing only a sequence of capital
letters or '_', followed by optional spaces.
This prevents "IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE" (the only line in the license text which consists of only
capitals and spaces, without any punctuation) from being interepreted as a
makedoc command, leading to:
"Can't find IMPLIED"
"warning, IMPLIED is not recognised"
being emitted by makedoc, (which is normally un-noticed because makedoc's stderr
is redirected to a .ref file)
2015-11-06 Jon Turney <jon.turney@dronecode.org.uk>
* doc/makedoc.c (iscommand): Only allow commands to have trailing
spaces, not space separated words.
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
makedoc defines a command as 'all upper case, and alone on a line'.
A few QUICKREF lines currently violate this by having some additional text after
the QUICKREF.
So, currently, these lines are treated as an unknown command.
This is benign as QUICKREF currently does nothing but produce some ignored
output on stderr. I'm not sure what the intent of QUICKREF is.
2015-11-06 Jon Turney <jon.turney@dronecode.org.uk>
* libm/mathfp/s_acos.c: Fix QUICKREF.
* libm/mathfp/e_acosh.c: Ditto.
* libm/math/w_asin.c: Ditto.
* libm/mathfp/e_acosh.c: Ditto.
* libm/mathfp/s_acos.c: Ditto.
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
The unused INTERNAL_DEFINITION, INTERNAL_FUNCTION and INTERNAL commands are
defined in terms of the non-existent built-in 'func'
This causes every single invocation of makedoc to output "Can't find func" three
times, as it parses doc.str.
This is normally un-noticed because makedoc's stderr is redirected to a .ref
file.
Fix these unused command definitions to something with equivalent lack of
effect, but without generating an error.
2015-11-06 Jon Turney <jon.turney@dronecode.org.uk>
* doc/doc.str: Fix INTERNAL_DEFINITION, INTERNAL_FUNCTION and
INTERNAL.
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
ARM newlib has various strcmp implementations that use .cfi_*
directives to generate unwind information.
The effect of this is that the generated objects contain .eh_frame
sections. However, ARM uses its own unwind info format, not
.eh_frame, which is generated by ARM-specific directives, not .cfi_*.
The .eh_frame sections are useless, but also not removed by strip and
may be loaded into memory at runtime.
This patch fixes this by using .cfi_sections .debug_frame (as in
glibc) so that the directives generate .debug_frame instead.
.debug_frame is useful for the debugger, can be removed by strip, and
is not loaded into memory at runtime.
* libc/machine/arm/strcmp-arm-tiny.S: Use .cfi_sections
.debug_frame.
* libc/machine/arm/strcmp-armv4.S: Likewise.
* libc/machine/arm/strcmp-armv4t.S: Likewise.
* libc/machine/arm/strcmp-armv6.S: Likewise.
* libc/machine/arm/strcmp-armv6m.S: Likewise.
* libc/machine/arm/strcmp-armv7.S: Likewise.
* libc/machine/arm/strcmp-armv7m.S: Likewise.
The patch cleans up the auto configury mechanism used to select
different implementations of memchr for various architecture versions.
The approach here is to remove the selection of memchr within automake
and instead use complimentary logic in memchr-stub.c and memchr.S to
choose between the gerneric memchr.c implementation or one of the
architecture specific implementations.
This patch also changes the selection criteria inline with the
previous proposal here:
https://sourceware.org/ml/newlib/2015/msg00752.html
but using the ACLE predefines.
Regressed for armv7-a armv5 armv8-a, correct selection of memcpy
implementation by manual inspection of a test program built for these
three architectures.
This patch cleans up the auto configury mechanism used to select
different implementations of memcpy for various architecture versions.
The approach here is to remove the selection of memcpy within automake
and instead use complimentary logic in memcpy-stub.c and memcpy.S to
choose between the generic memcpy.c implemenation or one of the
architecture specific memcpy*.S implemenations.
Regressed for armv7-a armv5 armv8-a, correct selection of memcpy
implementation by manual inspection of a test program built for these
three architectures.
This revised patch flips the remaining preprocessor logic in
memcpy-stub.c to use ACLE defines as requested in the previous review
and removes the now disused HAVE_ARMV7A and HAVE_ARMV8A configure.in
support.
The newlib configury logic that detects architecture version and
chooses an appropriate memcpy implementation does not consider
ARMv8-a.
This patch adds configury logic to detect ARMv8-a along with the
associated changes in Makefile.am and memcpy.
This is mandated by POSIX.
2015-10-30 Sebastian Huber <sebastian.huber@embedded-brains.de>
libc/include/pthread.h: Include <sched.h> instead of
<sys/sched.h>.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
aligned_alloc() is implemented in terms of posix_memalign() which is
only declared in <stdlib.h> but not defined in Newlib in general. At
least Linux and RTEMS implement this function.
newlib/ChangeLog
2015-10-14 Sebastian Huber <sebastian.huber@embedded-brains.de>
* libc/stdlib/Makefile.am (GENERAL_SOURCES): Add
alloc_aligned.c.c.
* libc/stdlib/Makefile.in: Regenerate.
* libc/stdlib/aligned_alloc.c: New.
Import some <stdlib.h> function declarations from latest FreeBSD and
implement them. I am not sure if we should call the global reent
cleanup in quick_exit() similar to exit().
newlib/ChangeLog
2015-10-14 Sebastian Huber <sebastian.huber@embedded-brains.de>
* libc/include/stdlib.h (at_quick_exit): Declare.
(quick_exit): Likewise.
* libc/stdlib/Makefile.am (GENERAL_SOURCES): Add
quick_exit.c.
* libc/stdlib/Makefile.in: Regenerate.
* libc/stdlib/quick_exit.c: New.
- Move types and defines to
<machine/_threads.h> so that it can be customized per target.
* libc/include/threads.h: New.
* libc/sys/rtems/include/machine/_threads.h: Likewise.
* include/sys/unistd.h (_SC_LEVEL*): Add cache-related variables as
on Linux.
* fhandler_proc.cc (format_proc_cpuinfo): Fetch cache information
from new cache functions in sysconf.cc, get_cpu_cache_intel and
get_cpu_cache_amd.
* sysconf.cc (__nt_query_system): New local helper.
(get_nproc_values): Utilize __nt_query_system on pre-Windows 7 systems.
Use GetLogicalProcessorInformationEx otherwise to handle more than
64 CPUs. Only handle _SC_NPROCESSORS_CONF and _SC_NPROCESSORS_ONLN.
(get_phys_pages): New helper to handle _SC_PHYS_PAGES.
(cpuid2_cache_descriptor): New array to map Intel CPUID 2 descriptor
values to cache type, cache size, associativity and linesize.
(cpuid2_cache_desc_compar): Comparision function for bsearch over
cpuid2_cache_descriptor.
(get_cpu_cache_intel_cpuid2): New function to fetch cache info from
Intel CPUID 2.
(get_cpu_cache_intel_cpuid4): Ditto from Intel CPUID 4.
(get_cpu_cache_intel): New function as CPU-specific entry point.
(assoc): New array to map associativity values from AMD CPUID
0x80000006.
(get_cpu_cache_amd): New function to fetch cache info from AMD CPUIDs
0x80000005 and 0x80000006.
(get_cpu_cache): New function to fetch cache info.
(sca): Call get_phys_pages if _SC_PHYS_PAGES is requested. Call
get_cpu_cache for new _SC_* cache requests.
(SC_MAX): Set to _SC_LEVEL4_CACHE_LINESIZE.
(get_phys_pages(void)): Call get_phys_pages(int).
* include/cygwin/version.h (CYGWIN_VERSION_API_MINOR): Bump.
* new-features.xml (ov-new2.3): Document sysconf cache addition.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Hi!
I've got the situation, that the function strlen() occurs twice in libc.a
(building newlib for ARM-V7a and Size-Optimized).
In newlib/libc/machine/arm/strlen.c there are the pre-processor stetements ...
#if defined (__OPTIMIZE_SIZE__) || defined (PREFER_SIZE_OVER_SPEED) || \
(defined (__thumb__) && !defined (__thumb2__))
/*...*/
#else
#if !(defined(_ISA_ARM_7) || defined(__ARM_ARCH_6T2__))
/*...*/
#endif
and in newlib/libc/machine/arm/strlen-armv7.S the "exclude" begins with
/* NOTE: This ifdef MUST match the ones in arm/strlen.c
We fallback to the one in arm/strlen.c for size optimised or
for older architectures. */
#if defined(_ISA_ARM_7) || defined(__ARM_ARCH_6T2__) && \
!(defined (__OPTIMIZE_SIZE__) || defined (PREFER_SIZE_OVER_SPEED) || \
(defined (__thumb__) && !defined (__thumb2__)))
But this is not completely contrary to arm/strlen.c (see above)!
To fix the logical statement in arm/strlen-armv7.S there are parentheses needed
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Hi,
As I mentioned recently [1], newlib is providing a "kill" symbol to link
against, without declaring "kill" in signal.h. This is confusing for the
libgfortran build, which tries to link against kill (which succeeds), then
tries to use it (which triggers -Werror=implicit-function-declaration).
This patch implements my suggestion in that thread - making the declaration
of 'kill' in libc/include/sys/signal.h unconditional.
I've tested this by building a modified libgfortran on AArch64/ARM to see
that the Werror goes away, and the libgfortran build succeeds.
Is something like this OK for newlib? If so, can someone please commit
it on my behalf, as I have no commit access here.
Otherwise, what is your preferred direction for me to take this patch?
Thanks,
James
On 11/08/2015 11:08, Andre Vieira wrote:
> On 10/08/15 14:38, Jon TURNEY wrote:
>> On 07/08/2015 11:13, Andre Vieira wrote:
>>> Building the manuals on Ubuntu LTS 14.04 (64-bit) using pdfTeX
>>> 3.1415926-2.5-1.40.14 (TeX Live 2013/Debian) is failing with the
>>> following error:
>>> "Transcript written on libc.log.
>>> /usr/bin/texi2dvi: pdfetex exited with bad status, quitting."
>>>
>>> libc.log complaints about the following:
>>>
>>> You can't use `@unskip' in vertical mode.
>>>
[...]
>>>
>>> This code has been around for a while, so it might have to do with a
>>> change in pdfTex?
So it seems this problem has been around for a while, and looks like it
is due to a change in texi2dvi in texinfo 5.0 or late 4.x, see [1].
I guess it's not very noticeable since it only occurs when doing 'make
dvi', which doesn't happen by default.
Attached is a different and perhaps cleaner workaround to the one in
that thread.
[1] https://sourceware.org/ml/newlib/2013/msg00057.html
From 4d386b5900b6c68e022004b447faa696be5ff8c7 Mon Sep 17 00:00:00 2001
From: Jon TURNEY <jon.turney@dronecode.org.uk>
Date: Tue, 11 Aug 2015 14:46:39 +0100
Subject: [PATCH] Use '@sp 1' rather than '@*' to workaround a change in
texi2dvi.
Since about TexInfo 5.0, using '@*' immediately after a table causes a 'You
can't use `@unskip' in vertical mode' error.
See https://sourceware.org/ml/newlib/2013/msg00057.html
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
On 31/07/15 10:34, Richard Earnshaw wrote:
> On 31/07/15 10:28, Andre Vieira wrote:
>> newlib/ChangeLog:
>> 2015-07-28 Andre Vieira <andre.simoesdiasvieira@arm.com>
>>
>> * libc/sys/arm/sys/param.h: Include machine/param.h
>> (HZ, NOFILE, PATHSIZE): Define.
>>
>> param_refactor_1.patch
>>
>>
>> From abc2d5f3398721f6ca891b9581feaba58730b19c Mon Sep 17 00:00:00 2001
>> From: Andre Simoes Dias Vieira <andsim01@arm.com>
>> Date: Tue, 28 Jul 2015 12:10:59 +0100
>> Subject: [PATCH 1/2] Moved param configuration to machine/param.h
>>
>> ---
>> newlib/libc/sys/arm/sys/param.h | 12 ++++++++++--
>> 1 file changed, 10 insertions(+), 2 deletions(-)
>>
>> diff --git a/newlib/libc/sys/arm/sys/param.h b/newlib/libc/sys/arm/sys/param.h
>> index adc066e9a8756e07edaaa8cadc79b5f05c996ac9..622c371972ab3c9dbb93ea5c51323a593e2a171a 100644
>> --- a/newlib/libc/sys/arm/sys/param.h
>> +++ b/newlib/libc/sys/arm/sys/param.h
>> @@ -3,9 +3,17 @@
>> #ifndef _SYS_PARAM_H
>> # define _SYS_PARAM_H
>>
>> -# define HZ (100)
>> -# define NOFILE (60)
>> +#include <machine/param.h>
>> +
>> +#ifndef HZ
>> +# define HZ (60)
>
> Why have you changed the value for HZ? It seems that, by convention,
> ARM boards have always used 100.
>
> R.
>
>> +#endif
>> +#ifndef NOFILE
>> +# define NOFILE>(60)
>> +#endif
>> +#ifndef PATHSIZE
>> # define PATHSIZE (1024)
>> +#endif
>>
>> #define BIG_ENDIAN 4321
>> #define LITTLE_ENDIAN 1234
>>
>
Hi Richard,
ARM's machine/param.h that is included in "#include <machine/param.h>",
before the 'ifndef' already defines HZ to be 100. This file was already
there, it was just not being used. I understand that this 'ifndef' might
be confusing, though I decided to add it to mimic the behavior of the
default sys/param.h.
There is however an unrelated issue with this patch, a typo in the
"#define NOFILE" that crept in there due to some copy pasting when
splitting the patch.
Here is a fixed version.
BR,
Andre
newlib/ChangeLog:
2015-07-28 Andre Vieira <andre.simoesdiasvieira@arm.com>
* libc/sys/arm/sys/param.h: Include machine/param.h
(HZ, NOFILE, PATHSIZE): Define.
From abc2d5f3398721f6ca891b9581feaba58730b19c Mon Sep 17 00:00:00 2001
From: Andre Simoes Dias Vieira <andsim01@arm.com>
Date: Tue, 28 Jul 2015 12:10:59 +0100
Subject: [PATCH 1/2] Moved param configuration to machine/param.h
* libc/include/sys/signal.h [__CYGWIN__]: include <sys/ucontext.h>
if compiling for POSIX.1-2008.
Signed-off-by: Yaakov Selkowitz <yselkowi@redhat.com>
Only on first call to the recursive malloc lock the restore value of
exception enable fields is stored.
* libc/sys/or1k/mlock.c: Fix exception enable saving
Fix documentation build since 6c2b1842 by not including stdio64 functions in the
reent syscalls menu if the node itself isn't going to be included because it's
under the STDIO64 flag.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Sorry, there was a typo in <sys/lock.h> which leads to memory corruption
since not enough space is reserved for the lock object.
newlib/ChangeLog
2015-07-30 Sebastian Huber <sebastian.huber@embedded-brains.de>
* libc/sys/rtems/include/sys/lock.h (__LOCK_INIT_RECURSIVE): Use
proper type.
This is an optimized memset for AArch64. Memset is split into 4 main
cases: small sets of up to 16 bytes, medium of 16..96 bytes which are
fully unrolled. Large memsets of more than 96 bytes align the
destination and use an unrolled loop processing 64 bytes per
iteration. Memsets of zero of more than 256 use the dc zva
instruction, and there are faster versions for the common ZVA sizes 64
or 128. STP of Q registers is used to reduce codesize without loss of
performance.
During libgcc build the first include search path for <...> is
"../newlib/libc/sys/rtems/include". Move all RTEMS specific header
files to "libc/sys/rtems/include" so that they can be found. Later
during libc build the header files in the previous location were somehow
present, but for libgcc build they were invisible. This change is
necessary to use <pthread.h> for the GCC thread model implementation.
newlib/ChangeLog
2015-07-27 Sebastian Huber <sebastian.huber@embedded-brains.de>
libc/sys/rtems/machine/_types.h: Move to ...
libc/sys/rtems/include/machine/_types.h: ... here.
libc/sys/rtems/machine/limits.h: Move to ...
libc/sys/rtems/include/machine/limits.h: ... here.
libc/sys/rtems/machine/param.h: Move to ...
libc/sys/rtems/include/machine/param.h: ... here.
libc/sys/rtems/sys/cpuset.h: Move to ...
libc/sys/rtems/include/sys/cpuset.h: ... here.
libc/sys/rtems/sys/dirent.h: Move to ...
libc/sys/rtems/include/sys/dirent.h: ... here.
libc/sys/rtems/sys/param.h: Move to ...
libc/sys/rtems/include/sys/param.h: ... here.
libc/sys/rtems/sys/syslimits.h: Move to ...
libc/sys/rtems/include/sys/syslimits.h: ... here.
libc/sys/rtems/sys/utime.h: Move to ...
libc/sys/rtems/include/sys/utime.h: ... here.
This got removed everywhere else in commit 139f923b, so I'm assuming whatever
ancient bug this was has been fixed long since.
There are plenty of other uses of texinfo with a filename containing an
underscore now.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
We use texinfo nodes beginning with an underscore in several other places, so
revert this ancient workaround for a no longer existing bug, and use the makedoc
generated texinfo for reentrant versions of syscalls, rather than handwritten
documentation.
Also alphabetically sort these functions.
Also add documentation for _execve_r, _getpid_r, _kill_r and _times_r functions,
whose non-reentrant versions are documented as stubs
v2:
Keep _open64_r, _lseek64_r and _fstat64_r functions under texinfo conditional STDIO64
Add _stat64_r function likewise.
Notes:
1. The handwritten prototypes give the reentrancy structure pointer as of type
void *, rather than the presumably more correct struct __reent *
2. The fcntl, gettimeofday, mkdir and rename functions are not documented as
stubs, so I haven't added the reentrant versions either
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
makedoc requires a NEWPAGE command to preceed the second and subsequent FUNCTION
commands in a file in order to produce the correct texinfo output.
Add missing NEWPAGE commands needed in reent/execr.c. and reent/signalr.c, which
contain makedoc markup for multiple functions.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
* libc/include/machine/setjmp.h (siglongjmp): Declare as function on
Cygwin.
(sigsetjmp): Ditto.
(_longjmp): Mark as noreturn function on Cygwin.
* common.din (siglongjmp): Export.
(sigsetjmp): Export.
* gendef: Change formatting of some comments.
(sigsetjmp): Implement.
(siglongjmp): Implement.
(__setjmpex): x86_64 only: Drop entry point.
(setjmp): x86_64 only: Store tls stackptr in Frame now, store MXCSR
and FPUCW registers in Spare, as MSVCRT does.
(longjmp): x86_64 only: Restore tls stackptr from Frame now, restore
MXCSR and FPUCW registers from Spare.
* include/cygwin/version.h (CYGWIN_VERSION_API_MINOR): Bump.
* new-features.xml (ov-new2.2): Document sigsetjmp, siglongjmp.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
This is an optimized memset for AArch64. Memset is split into 4 main
cases: small sets of up to 16 bytes, medium of 16..96 bytes which are
fully unrolled. Large memsets of more than 96 bytes align the
destination and use an unrolled loop processing 64 bytes per
iteration. Memsets of zero of more than 256 use the dc zva
instruction, and there are faster versions for the common ZVA sizes 64
or 128. STP of Q registers is used to reduce codesize without loss of
performance.
This is an optimized memcpy for AArch64. Copies are split into 3 main
cases: small copies of up to 16 bytes, medium copies of 17..96 bytes
which are fully unrolled. Large copies of more than 96 bytes align
the destination and use an unrolled loop processing 64 bytes per
iteration. In order to share code with memmove, small and medium
copies read all data before writing, allowing any kind of overlap. On
a random copy test memcpy is 40.8% faster on A57 and 28.4% on A53.
This is an optimized memmove for AArch64. All copies of up to 96
bytes and all backward copies are done by the new memcpy. The only
remaining case is large forward copies which are done in the same way
as the memcpy loop, but copying from the end rather than the start.
As a commonly-included header, the #define basename in <string.h> can
affect code which uses "basename" for its own purposes (e.g. struct
members or C++ namespaced functions). When such cases occur and some
code includes <string.h> and some not, then errors result. OTOH,
<libgen.h> is rarely used, and that's where the renaming occurs in
glibc, so code using <libgen.h> should already be safe.
* libc/include/libgen.h (basename): Define as __xpg_basename
for source compatibility with glibc.
Declare with __ASMNAME("basename") for ABI compatibility.
* libc/include/string.h (basename): Define as basename for
source compatibility with glibc.
Declare with __ASMNAME("__gnu_basename") for ABI compatibility.
https://sourceware.org/ml/newlib/2015/msg00520.html describes
how sys/time.h uses __BSD_VISIBLE while the types used in the
affected inline functions are guarded with !_POSIX_SOURCE.
Fix that by guarding the type with __BSD_VISIBLE as well.
* libc/include/sys/time.h: Explicitely include sys/cdefs.h.
* libc/include/sys/types.h: Ditto. Guard BSD convenience base types
with __BSD_VISIBLE rather than !_POSIX_SOURCE.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The CHECK_INIT() is necessary before the _newlib_flockfile_start() since
this would use otherwise acquire an uninitialized lock which gets
initialized after this leading to a corrupt release.
newlib/ChangeLog
2015-07-01 Sebastian Huber <sebastian.huber@embedded-brains.de>
libc/stdio/fputs.c (_puts_r): Add missing CHECK_INIT().
libc/stdio/gets.c (_gets_r): Add missing _REENT_SMALL_CHECK_INIT() and
CHECK_INIT(). Use _stdin_r() to get the file pointer instead of stdin.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
These source files have makedoc markup, but aren't listed to be chewed by
makedoc. I am assuming that is accidental.
Future work: Note that stdio/fseeko.c, stdio/ftello.c and common/s_isnand.c have
makedoc markup, but duplicate stdio/fseek.c, stdio/ftell.c and common/s_isnan.c
respectively.
2015-06-23 Jon Turney <jon.turney@dronecode.org.uk>
* libc/ctype/Makefile.am (CHEWOUT_FILES): Add isblank.def.
* libc/ctype/ctype.tex: Include isblank and add to menu.
* libc/posix/Makefile.am (CHEWOUT_FILES): Add posix_spawn.def.
* libc/posix/posix.tex: Include posix_spawn and add to menu.
* libc/stdio64/Makefile.am (CHEWOUT_FILES): Add fdopen.def.
* libc/stdio64/stdio64.tex: Include fdopen64 and add to menu.
* libc/stdio64/fdopen64.c: Improve one-line description.
* libc/string/Makefile.am (CHEWOUT_FILES): Add strchrnul.def.
* libc/string/strings.tex: Include strchrnul and add to menu.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
I think these are accidental omissions, as these source files are listed to be
chewed by makedoc, but the result is not included by any texinfo source file.
Future work: Nothing in libc/reent/ which is processed by makedoc is included by
reent.tex
2015-06-23 Jon Turney <jon.turney@dronecode.org.uk>
* libc/stdlib/stdlib.tex: Include itoa and utoa, and add to menu.
* libc/string/strings.tex: Include memrchr and rawmemchr, and add
to menu.
* libm/math/math.tex: Include exp10 and pow10, and add to menu.
* libm/common/s_exp10.c: Improve one-line description.
* libm/common/s_exp10.c: Ditto.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Don't chew files which contain no documentation markup.
Neither of the alternatives for MALLOCR (mallocr.c or nano-mallocr.c) contain
any documentation markup.
2015-06-23 Jon Turney <jon.turney@dronecode.org.uk>
* libc/stdlib/Makefile.am (CHEWOUT_FILES): Remove $(MALLOCR).def.
* libc/stdio/Makefile.am (CHEWOUT_FILES): Remove getwc.def and
putwc.def.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Fix typo-ed function names in efgcvt.c documentation, neither gvcvt nor gdvtf
exists.
2015-06-23 Jon Turney <jon.turney@dronecode.org.uk>
* libc/stdlib/efgcvt.c: Fix typo-ed function names in
documentation.
* libc/stdlib/stdlib.tex: Fix function name in menu to match.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Fix an inconsistent use of '.' to separate function names in FUNCTION. ',' is
used everywhere else.
2015-06-23 Jon Turney <jon.turney@dronecode.org.uk>
* libc/stdio/fread.c: Fix inconsistent use of '.' to separate
function names in FUNCTION mark up.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
2015-06-23 Jon Turney <jon.turney@dronecode.org.uk>
* libc/stdlib/llabs.c: Mark up parameter name in ANSI_SYNOPSIS.
* libc/time/tzset.c: Add and mark up parameter in SYNOPSIS.
* libm/common/s_nan.c: Ditto.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
2015-06-23 Jon Turney <jon.turney@dronecode.org.uk>
* libc/stdio/getchar_u.c: Fix a non-ANSI prototype in SYNOPSIS.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
2015-06-23 Jon Turney <jon.turney@dronecode.org.uk>
* libc/string/wcscpy.c: Remove stray ',' from prototype in
ANSI_SYNOPSIS.
* libc/string/wcpcpy.c: Ditto.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
2015-06-23 Jon Turney <jon.turney@dronecode.org.uk>
* libc/signal/signal.tex: Use texinfo not makedoc markup.
* libc/stdio/stdio.tex: Ditto.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
* libc/include/sys/config.h: Move evaluation of _UINTPTR_EQ_ULONG and
_UINTPTR_EQ_ULONGLONG from here...
* libc/include/sys/_intsup.h: ...to here. Rename to _INTPTR_EQ_LONG
and _INTPTR_EQ_LONGLONG to refer to signed base type. Add test for
base type of int32_t and set _INT32_EQ_LONG accordingly.
* libc/include/stdint.h: Change checks for __have_long32 to checks
for _INT32_EQ_LONG.
* libc/include/inttypes.h: Ditto. Accommodate aforementioned name
change.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
This avoids a strlen(NULL) crash a few lines later.
* libc/time/strftime.c (strftime) <%Z>: Initialize tznam to NULL.
Use _tzname as fallback if TM_ZONE is NULL.
2015-03-23 Joel Sherrill <joel.sherrill@oarcorp.com
* configure.in: Delete logic to determine _UINTPTR_EQ_ULONGLONG
and _UINTPTR_EQ_ULONG at configuration time.
*libc/include/sys/config.h: Add logic to determine
_UINTPTR_EQ_ULONGLONG and _UINTPTR_EQ_ULONG at compilation time.
* libc/include/inttypes.h: Add include of <sys/config.h>.
* configure: Regenerated.
If the newlib .info files are installed using install-info, 'info libc' and
'info libm' don't work.
This seems to be due to the formatting of the directory entry line not being
quite right, so fix that.
Also use @direntry texinfo command, rather than writing .info directory entry
literally.
Also use @dircategory texinfo command to place into 'Newlib' category, rather
than ending up in 'Miscellaneous'
newlib/ChangeLog:
2015-03-13 Jon TURNEY <jon.turney@dronecode.org.uk>
* libc/libc.texinfo: Fix directory entry.
* libm/libm.texinfo: Ditto.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
* testsuite/newlib.stdio/swprintf.c (main): Change size of value
used to initialise 'val' variable so that it will compile on
targets with 32-bit doubles.
* libc/include/sys/config.h: Dynamic reentrancy for or1k sys targets
* libc/sys/or1k/: New system for or1k baremetal
* libc/sys/or1k/Makefile.am: New file
* libc/sys/or1k/Makefile.in: New file
* libc/sys/or1k/aclocal.m4: New file
* libc/sys/or1k/configure.in: New file
* libc/sys/or1k/configure: New file
* libc/sys/or1k/getreent.S: New file
* libc/sys/or1k/mlock.S: New file
* libc/sys/or1k/or1k-asm.S: New file
on systems where available. On Cygwin, call function to get values.
Add comment to explain why. Drop TZ_LOCK/TZ_UNLOCK in 'z' case since
it's not necessary. In 'Z' case, add a comment to document a potential
codeset problem.
improvements. Adjust to allow building as stpcpy.
* libc/machine/aarch64/stpcpy.S: New file.
* libc/machine/aarch64/stpcpy-stub.c: New file.
* libc/machine/aarch64/Makefile.am (lib_a_SOURCES): Build stpcpy.
* libc/machine/aarch64/Makefile.in: Regenerated.
[!__GNUC__]: Declare real functions for the macros, and make
the macros conditional on !__cplusplus.
* libc/stdio/Makefile.am (ELIX_4_SOURCES): Add stdio_ext.c.
(CHEWOUT_FILES): Add stdio_ext.def.
* libc/stdio/Makefile.in: Regenerate.
* libc/stdio/stdio.tex: Include stdio_ext.def.
* libc/stdio/stdio_ext.c: New file.
* libc/machine/aarch64/strrchr-stub.c: New file.
* libc/machine/aarch64/Makefile.am: Add them to build list.
* libc/machine/aarch64/Makefile.in: Regenerated.
from the 64-bit _JBTYPE definition.
* libc/machine/mips/setjmp.S: Re-work the o32 FP64 support to match
the now one-and-only supported o32 FP64 ABI extension. Also
support o32 FPXX.
* configure.in: Add autoconf test to determine size of uintptr_t.
* newlib.hin: Add new autoconf feature variables.
* libc/include/inttypes.h: Use new feature variables.
* configure: Regenerate.
* libc/include/math.h: _LONG_LONG_TYPE replaced by "long long".
Guards for C99 and C++11 functions fixed.
* libc/include/stdlib.h: Guards for C99 and C++11 functions fixed.
* libc/time/month_lengths.c: New file with __month_lengths array
(previously mon_lengths array in mktm_r.c)
* libc/time/tzcalc_limits.c: New file with __tzcalc_limits() from
mktm_r.c
* libc/time/lcltime_r.c (localtime_r): Simplify by changing call to
_mktm_r() with call to gmtime_r() and code moved from _mktm_r() which
was used to do time zone adjustments
* libc/time/gmtime_r.c (gmtime_r): Simplify by moving all relevant
code from _mktm_r(), breaking all dependencies on time zone related
functions
* libc/time/mktm_r.c: Delete file
* libc/time/local.h: Update accordingly - remove declaration of
_mktm_r(), add declaration of __month_lengths[]
* libc/time/Makefile.am: Modify accordingly.
* libc/time/Makefile.in: Regenerate.
Found by:
find -name '*.h' |xargs grep -i 'attribute.*(([a-z]'
For an example of the type of bugs this causes, try compiling this valid
C11 program (it's valid because 'noreturn' is reserved for use in the
user namespace unless you include <stdnoreturn.h>):
$ cat foo.c
#define noreturn __attribute__((noreturn))
#include <stdlib.h>
$ gcc -c -o foo.o -Wall foo.c
In file included from /usr/include/stdlib.h:11:0,
from foo.c:2:
foo.c:1:18: error: expected ')' before '__attribute__'
#define noreturn __attribute__((noreturn))
^
/usr/include/stdlib.h:66:28: error: expected ',' or ';' before ')' token
_VOID _EXFUN(abort,(_VOID) _ATTRIBUTE ((noreturn)));
^
* libc/machine/spu/spu_timer_internal.h: Decorate attribute names
with __, for namespace safety.
* libc/machine/xscale/machine/profile.h: Likewise.
* libc/include/stdlib.h: Likewise.
* libc/include/_ansi.h: Likewise.
* libc/include/sys/unistd.h: Likewise.
* libc/sys/linux/linuxthreads/libc-symbols.h: Likewise.
* libc/sys/linux/linuxthreads/internals.h: Likewise.
* libc/sys/linux/machine/i386/weakalias.h: Likewise.
* libc/sys/linux/machine/i386/dl-procinfo.h: Likewise.
* libc/sys/linux/machine/i386/dl-machine.h: Likewise.
* libc/sys/linux/libc-symbols.h: Likewise.
* libc/sys/linux/iconv/gconv_charset.h: Likewise.
* libc/sys/linux/include/resolv.h: Likewise.
* libc/sys/linux/sys/unistd.h: Likewise.
* libc/sys/linux/dl/atomicity.h: Likewise.
* libc/sys/linux/dl/dynamic-link.h: Likewise.
* libc/sys/linux/dl/ldsodefs.h: Likewise.
2014-07-11 K�vin Petit <kevin.petit@arm.com>
* libc/machine/aarch64/memchr.S: New file.
* libc/machine/aarch64/memchr-stub.c: New file.
* libc/machine/aarch64/Makefile.am: Add the new files.
* libc/machine/aarch64/Makefile.in: Regenerated.
Scan CID 60023).
* libc/ctype/iswalpha.c (iswalpha): Add bounds check to avoid
out-of-bounds read from utf8 tables (CID 59949).
* libc/locale/ldpart.c (__part_load_locale): Add 1 byte to size of lbuf.
Write NUL into the last byte to accommodate split_lines (CID 60047).
* libc/machine/aarch64/strchrnul-stub.c: New file.
* libc/machine/aarch64/Makefile.am: Add them to build list.
* libc/machine/aarch64/Makefile.in: Regenerated.
* libc/machine/aarch64/strchr-stub.c: New file
* libc/machine/aarch64/Makefile.am: Add them to build list.
* libc/machine/aarch64/Makefile.in: Regenerated.
(msp430): Set it.
* configure.in (newlib_nano_malloc): Leave unset if not set by
the user.
* configure: Regenerate.
* libc/configure.in (NEWLIB_NANO_MALLOC): Set after running
configure.host.
(newlib_nano_malloc): Leave unset if not set by the user.
* libc/configure: Regenerate.
* libc/machine/arm/strcmp-armv4.S: New file.
* libc/machine/arm/strcmp-armv4t.S: New file.
* libc/machine/arm/strcmp-armv6.S: New file.
* libc/machine/arm/strcmp-armv7.S: New file.
* libc/machine/arm/strcmp-armv7m.S: New file.
* libc/machine/arm/strcmp.S: Replace with wrapper for various
implementations.
* libc/machine/arm/Makefile.am (strcmp.o, strcmp.obj): Add
dependencies.
* libc/machine/arm/Makefile.in: Regenerated.
* configure.host (sys_dir, newlib_cflags): Set sys_dir to tirtos and use
-D__DYNAMIC_REENT__ and -DMALLOC_PROVIDED compiler options for TIRTOS
target.
* libc/stdio/local.h (_STDIO_CLOSE_PER_REENT_STD_STREAMS): Change #ifdef
to not define this macro when __tirtos__ is defined.
* libc/sys/tirtos : Add support for TIRTOS.
* libc/sys/tirtos/Makefile.am, libc/sys/tirtos/lock.c: New files.
* libc/sys/tirtos/configure.in, libc/sys/tirtos/include/sys/lock.h: Ditto.
semantics from POSIX to BSD.
* libc/stdio/fclose.c (_fclose_r): Conditionalize file flushing on
_STDIO_BSD_SEMANTICS. Call __sflush_r rather than _fflush_r. Add
comment.
* libc/stdio/fflush.c (__sflushw_r): New function, only available
if _STDIO_BSD_SEMANTICS is defined.
* libc/stdio/findfp.c (_cleanup_r): Call _fwalk_reent rather than
_fwalk. Conditionalize cleanup function call on _STDIO_BSD_SEMANTICS.
Add comments. Add FIXME.
* libc/stdio/local.h (__sflushw_r): Declare if _STDIO_BSD_SEMANTICS is
defined.
* libc/search/hash.c (hash_delete): Change __uint32_t to u_int.
(hash_get): Likewise.
(hash_put): Likewise.
(hash_seq): Likewise.
(hash_sync): Likewise.
Also fix former ChangeLog entry to be 2014.
* libc/include/limits.h: Define LLONG_MIN, LLONG_MAX and ULLONG_MAX
for C++11 too.
* libc/include/stdlib.h: Define struct lldiv_t, _Exit, atoll, llabs
and lldiv for C99 and C++11. Move wcstold to wchar.h.
* libc/include/wchar.h: Define WCHAR_MIN and WCHAR_MAX according to
__WCHAR_UNSIGNED__ if it is provided, and correct the limit when
unsigned (to 32 all-1 bits, not 31). Define FILE as in stdio.h.
Move wcstold from stdlib.h here.
header includes. Include <sys/features.h> for
__GNUC_PREREQ__().
(__u?int.*_t): Define via GCC provided __U?INT.*_TYPE__ if
available.
(__intptr_t): Define.
(__uintptr_t): Likewise.
* libc/include/stdint.h: Include <machine/_default_types.h>
instead of <_ansi.h>.
(u?int.*_t): Define via __u?int.*_t provided by
<machine/_default_types.h>.
(u?int_fast.*_t): Define via GCC provided
__U?INT_FAST.*_TYPE__ if available.
(U?INT.*(MIN|MAX)): Define via GCC provided __U?INT.*(MIN|MAX)__
if available.
(U?INT.*_C): Define via GCC provided __U?INT.*_C if available.
* libc/include/sys/cdefs.h: Use <machine/_default_types.h>
instead of <stdint.h>.
* libc/sys/rtems/sys/cpuset.h: Likewise.
* libc/sys/rtems/machine/_types.h: Include <stdint.h> for
FreeBSD compatibility.
* libc/include/machine/setjmp.h: Add support for __mips_fpr being
64 and treat it the same as if __mips64 is set.
* libc/machine/mips/setjmp.S: Ditto, plus add checks for _MIPS_SIM
being _ABIN32 and _ABI64.
in newlib or Cygwin.
(process_spawnattr): Use sigprocmask rather than _sigprocmask. Use
sigaction rather than _sigaction.
(process_file_actions_entry): Use dup2 rather than _dup2.
(do_posix_spawn): Use execvpe rather than _execvpe. Use waitpid
rather than _waitpid.
"const char *".
* newlib/libc/stdlib/getopt.c (getopt_internal): Use fputs()/fputc()
instead of fprintf() to save code space. Fix signed/unsigned
comparison.
* libc/stdlib/nano-mallocr.c (RONECALL): New parameter macro.
(sbrk_start): New variable.
(current_mallinfo, free_list): Forward declaration of data.
(chunk): Define size as long type.
(mallinfo): Synchronize with latest malloc.h.
(nano_*): Forward declaration of functions.
(get_chunk_from_ptr): Defined to static inline.
(nano_mallinfo): Implement this function.
(nano_malloc_stats): Implement this function.
__readfn and __writefn parameter to match new definition of
FILE's _read and _write methods.
(_funopen_r): Ditto.
(funopen): Ditto.
(_funopen_r): Ditto.
* libc/include/sys/config.h (_READ_WRITE_BUFSIZE_TYPE) Define
as type int if not already defined. Add comment to explain.
* libc/include/sys/reent.h: Include stddef.h.
(struct __sFILE): Change type of last parameter in declaration
of _read and _write methods to _READ_WRITE_BUFSIZE_TYPE.
(struct __sFILE64): Ditto.
* libc/stdio/local.h (__sread): Declare with last parameter set
to _READ_WRITE_BUFSIZE_TYPE.
(__seofread): Ditto.
(__swrite): Ditto.
(__swrite64): Ditto.
* libc/stdio/fvwrite.c (__sfvwrite_r): Change type of local
variables w and s to _READ_WRITE_RETURN_TYPE.
* libc/stdio/fflush.c (__sflush_r): Change type of local variables
n and t to _READ_WRITE_BUFSIZE_TYPE and _READ_WRITE_RETURN_TYPE.
Add local variables flags to keep _flags value.
* libc/stdio/fmemopen.c (fmemreader): Align to above change.
(fmemwriter): Ditto.
* libc/stdio/fopencookie.c (fcreader): Ditto.
(fcwriter): Ditto.
* libc/stdio/funopen.c (funread): Ditto.
(funwrite): Ditto.
(funreader): Ditto.
(funwriter): Ditto.
* libc/stdio/open_memstream.c (memwriter): Ditto.
* libc/stdio/stdio.c (__sread): Ditto.
(__seofread): Ditto.
(__swrite): Ditto.
* libc/stdio64/stdio64.c (__swrite64): Ditto.
* configure.host: Disable new posix_spawn function for all
users of posix dir except Cygwin.
* libc/posix/Makefile.am: Add support for new posix_spawn function.
* libc/posix/Makefile.in: Regenerate.
* libc/posix/posix_spawn.c: New file.
* libc/include/spawn.h: Ditto.
Lite exit support.
* README: Add information about lite-exit.
* acconfig.h (_LITE_EXIT): New macro.
* configure.in (enable-lite-exit): New option.
(_LITE_EXIT): Define new macro.
* configure: Regenerated.
* newlib.hin (_LITE_EXIT): New macro.
* libc/stdlib/__atexit.c [_LITE_EXIT]: Add dummy explicit
reference to __call_exitprocs.
* libc/stdlib/cxa_atexit.c [_LITE_EXIT]: Make __register_exitproc a
weak reference.
* libc/stdlib/exit.c (exit)[_LITE_EXIT]: Remove TWS and weakly reference
__call_exitprocs.
Adjust the conditions for entering the aligned copy loop to
improve performance on mutually misaligned buffer copies.
2013-07-01 Will Newton <will.newton@linaro.org>
* libc/machine/arm/memcpy-armv7a.S: Adjust entry to
aligned loop to improve misaligned copy performance.
Import the latest version of strlen from the Linaro cortex-strings
package. This version is faster across a variety of block size and
alignments on ARMv7.
newlib/ChangeLog:
2013-06-21 Will Newton <will.newton@linaro.org>
* libc/machine/arm/strlen-armv7.S: Import latest strlen
code from Linaro cortex-strings.
* libc/include/sys/config.h (_REENT_GLOBAL_ATEXIT): Define for
RTEMS.
* libc/include/sys/reent.h (_reent): Use _REENT_GLOBAL_ATEXIT.
(_global_atexit): Declare if _REENT_GLOBAL_ATEXIT is defined.
* libc/reent/reent.c (_reclaim_reent): Remove atexit cleanup if
_REENT_GLOBAL_ATEXIT is defined.
(_wrapup_reent): Remove atexit handling if _REENT_GLOBAL_ATEXIT
is defined.
* libc/stdlib/__atexit.c (_global_atexit0): Define if
_REENT_GLOBAL_ATEXIT is defined.
* libc/stdlib/__call_atexit.c (_global_atexit): Define if
_REENT_GLOBAL_ATEXIT is defined.
* libc/include/sys/features.h: Redefine compilation environment
definitions for Cygwin to cover 64 bit Cygwin.
* libc/ctype/ctype_.c (_ctype_): Fix definition for 64 bit Cygwin.
* libc/include/machine/setjmp.h: Change definition of _JBLEN to allow
different values for 32 bit and 64 bit Cygwin.
* libc/include/reent.h (stat64): Define as stat under Cygwin, instead
of as __stat64. Undef stat64 if not building Newlib.
* libc/include/sys/stat.h (stat64): Define as stat under Cygwin.
* libc/machine/arm/memcpy-stub.c: Use generic memcpy if unaligned
access is not enabled.
* libc/machine/arm/memcpy.S: Faster memcpy implementation for
Cortex A15 cores using NEON and VFP if available.
* newlib.hin (_WCHAR_ORIENT): Undef
* configure.in (--enable-newlib-wchar-orient): New option.
* configure: Regenerated.
* libc/configure.in (--enable-newlib-wchar-orient): New option.
* libc/configure: Regenerated.
* libc/stdio/Makefile.am (NEWLIB_WIDE_ORIENT): Use.
* libc/stdio/Makefile.in: Regenerated.
* libc/stdio/local.h (ORIENT): Use _WCHAR_ORIENT to control
the definition. Add alternative definition.
* libc/stdio/vfprintf.c (__sfputs_r, __sprint_r): Use _WCHAR_ORIENT
to control the wide char output.
* newlib.hin (_FVWRITE_IN_STREAMIO): Undefine.
* configure.in (--disable-newlib-fvwrite-in-streamio): New option.
* configure: Regenerated.
* libc/stdio/fputs.c (_fputs_r): Use _FVWRITE_IN_STREAMIO to
control __sfvwrite_r. Add alternative implementation.
* libc/stdio/fputws.c (_fputws_r): Ditto.
* libc/stdio/fwrite.c (_fwrite_r): Ditto.
* libc/stdio/puts.c (_puts_r): Ditto.
* libc/stdio/vfprintf.c (__ssputs_r, __sfputs_r): New function.
(_VFPRINTF_R): Use _FVWRITE_IN_STREAMIO to control vector buffer.
(__SPRINT): Use _FVWRITE_IN_STREAMIO to control macro definition.
* libc/stdio/vfwprintf.c (_VFWPRINTF_R): Use _FVWRITE_IN_STREAMIO
to control vector buffer.