{p}select/{p}poll completely ignored Alt+Numpad key sequences in console
input which results in newer readline using pselect to fail handling such
sequences correctly. See https://cygwin.com/ml/cygwin/2017-01/msg00135.html
During debugging and testing it turned out that while reading console
input, single key presses during an Alt+Numpad sequences where not
ignored, so ultimately a sequence like
Alt-down Numpad-1 Numpad-2 Numpad-3
whihc is supposed to result in a single character in the input stream
will actually result in 4 chars in the input stream, three control
sequences and the actual character.
Both problems should be fixed by this patch.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
A few files were missing headers for memset/malloc, likely missed
because the files don't directly call the functions, rather they
come in via macros in libc/include/sys/reent.h:
#define _REENT_CHECK(var, what, type, size, init) do { \
struct _reent *_r = (var); \
if (_r->what == NULL) { \
_r->what = (type)malloc(size); \
#define _REENT_CHECK_ASCTIME_BUF(var) \
_REENT_CHECK(var, _asctime_buf, char *, _REENT_ASCTIME_SIZE, \
memset((var)->_asctime_buf, 0, _REENT_ASCTIME_SIZE))
Without these fixes, implicit function signatures are provided,
which gcc warns could cause aliasing issues down the line:
../../../../../../../newlib-2.5.0/newlib/libc/time/asctime.c:62:3: warning: type of 'memset' does not match original declaration [-Wlto-type-mismatch]
/Volumes/code/external/newlib-cygwin/newlib/libc/include/string.h:29:7: note: return value type mismatch
_PTR _EXFUN(memset,(_PTR, int, size_t));
^
/Volumes/code/external/newlib-cygwin/newlib/libc/include/string.h:29:7: note: 'memset' was previously declared here
/Volumes/code/external/newlib-cygwin/newlib/libc/include/string.h:29:7: note: code may be misoptimized unless -fno-strict-aliasing is used
../../../../../../../newlib-2.5.0/newlib/libc/time/asctime.c:62:3: warning: type of 'malloc' does not match original declaration [-Wlto-type-mismatch]
/Volumes/code/external/newlib-cygwin/newlib/libc/include/malloc.h:37:13: note: return value type mismatch
extern _PTR malloc _PARAMS ((size_t));
^
/Volumes/code/external/newlib-cygwin/newlib/libc/include/malloc.h:37:13: note: 'malloc' was previously declared here
/Volumes/code/external/newlib-cygwin/newlib/libc/include/malloc.h:37:13: note: code may be misoptimized unless -fno-strict-aliasing is used
../../../../../../../newlib-2.5.0/newlib/libc/time/lcltime.c:58:3: warning: type of 'malloc' does not match original declaration [-Wlto-type-mismatch]
/Volumes/code/external/newlib-cygwin/newlib/libc/include/malloc.h:37:13: note: return value type mismatch
extern _PTR malloc _PARAMS ((size_t));
^
/Volumes/code/external/newlib-cygwin/newlib/libc/include/malloc.h:37:13: note: 'malloc' was previously declared here
/Volumes/code/external/newlib-cygwin/newlib/libc/include/malloc.h:37:13: note: code may be misoptimized unless -fno-strict-aliasing is used
../../../../../../../newlib-2.5.0/newlib/libc/string/strsignal.c:70:3: warning: type of 'malloc' does not match original declaration [-Wlto-type-mismatch]
/Volumes/code/external/newlib-cygwin/newlib/libc/include/malloc.h:37:13: note: return value type mismatch
extern _PTR malloc _PARAMS ((size_t));
^
/Volumes/code/external/newlib-cygwin/newlib/libc/include/malloc.h:37:13: note: 'malloc' was previously declared here
/Volumes/code/external/newlib-cygwin/newlib/libc/include/malloc.h:37:13: note: code may be misoptimized unless -fno-strict-aliasing is used
Including the proper headers elminates the implicit function
signatures and these warnings.
This patch fixes the following problem:
Commit 9636c426 refactored the pipe code especially to make sure
to call WriteFile only with chunks matching the maximum atomic write
count. This accidentally introduced a small change in behaviour
on blocking pipes due to the success case falling through into the
error case. Rather then writing atomic chunks until all bytes are
written, the code immediately broke from the loop after writing
the first chunk, basically the same as in case of non-blocking
writes. This behaviour is not compliant to POSIX which requires
"Write requests to a pipe or FIFO [...]
* If the O_NONBLOCK flag is clear, a write request may cause the
thread to block, but on normal completion it shall return nbyte."
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
This patch adds further comments to nano-mallocr.c, to more comprehensively
explain how padding works in the malloc_chunk structure.
It was originally discussed in the following thread:
https://sourceware.org/ml/newlib/2017/msg00031.html
2017-01-13 Joe Seymour <joe.s@somniumtech.com>
newlib/
* libc/stdlib/nano-mallocr.c (malloc_chunk, get_chunk_from_ptr)
(nano_malloc): Add comments.
If newfile already exists and is in use, trying to overwrite it with
NtSetInformationFile(FileRenameInformation) fails exactly as if we
don't have the permissions to delete it. Unfortunately the return code
is the same STATUS_ACCESS_DENIED, so we have no way to distinguish
these cases. What we do here so far is to start a transaction to delete
newfile. If this open fails with a transactional error we stop the
transaction and retry opening the file without transaction.
But, here's the problem: If newfile is in use, NtOpenFile(oldfile)
naturally does NOT fail with a transactional error. Rather, the
subsequent call to unlink_nt(newfile) does, because there's another
handle open to newfile outside a transaction. However, the code does
not check if unlink_nt fails with a transactional error and so fails
to retry without transaction.
This patch recifies the problem and checks unlink_nt's status as well.
Refactor code to get rid of goto into another code block.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
A *very* recent Windows build adds more code to the preamble of
RtlGetCurrentDirectory_U() so that the previous heuristic failed to find
the call to the locking routine.
This only affects the 64-bit version of ntdll, where the 0xe8 byte is
now found at offset 40, not the 32-bit version. However, let's just
double the area we search for said byte for good measure.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
- use of DEBUG flag is non-standard and interferes with other
project's using same flag
- change to be _REENT_CHECK_DEBUG which means the flag is
allowing debugging of _REENT_CHECK macros
- use #ifdef instead of #if
Returns the process's environment concatenated into a single block of
null-terminated strings, along with the length of the environment block.
Adds an associated PICOM_ENVIRON commune_process handler.
win32env_to_cygwenv handles converting wchar to char and some other
minor taks. Optionally it handles converting any paths in variables to
posix paths.
This will be useful for implementing /proc/<pid>/environ
The pthread_setname_np() and pthread_getname_np() are GNU extensions and
provided by glibc.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
As described in nano-mallocr.c, chunks of heap are represented in memory
as a size (of type long), followed by some optional padding containing a
negative offset to size, followed by the data area.
get_chunk_from_ptr is responsible for taking a pointer to the data area
(as returned by malloc) and finding the start of the chunk. It does this
by assuming there is no padding and trying to read the size, if the size
is negative then it uses that as an offset to find the true size.
Crucially, it reads the padding area as a long.
nano_malloc is responsible for populating the optional padding area. It
does so by casting a pointer to an (int *) and writing the negative
offset into it.
This means that padding is being written as an int but read as a long.
On msp430 an int is 2 bytes, while a long is 4 bytes. This means that 2
bytes are written to the padding, but 4 bytes are read from it: it has
only been partially initialised.
nano_malloc is the default malloc implementation for msp430.
This patch changes the cast from (int *) to (long *). The change to
nano_malloc has has been observed to fix a TI Energia project that
had been malfunctioning because malloc was returning invalid addresses.
The change to nano_memalign is based entirely on code inspection.
I've built and tested as follows:
Configured (gcc+newlib) with: --target=msp430-elf --enable-languages=c
gcc testsuite variations:
msp430-sim/-mcpu=msp430
msp430-sim/-mcpu=msp430x
msp430-sim/-mcpu=msp430x/-mlarge/-mdata-region=either/-mcode-region=either
msp430-sim/-mhwmult=none
msp430-sim/-mhwmult=f5series
My testing has shown no regressions, however I don't know if the gcc
testsuite provides sufficient coverage for this patch?
I don't have write access, so if this patch is acceptable after review,
I would appreciate it if someone would commit it for me.
Thanks,
2017-01-XX Joe Seymour <joe.s@somniumtech.com>
newlib/
* libc/stdlib/nano-mallocr.c (nano_malloc): Fix incorrect cast.
(nano_memalign): Likewise.
Add a user-defined name to the self-contained synchronization objects in
order to make system diagnostics, tracing and debugging more user
friendly.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
commit 67fd2101 introduced a bad bug. Changing sys_privs to a static
area and just returning a pointer is nice... *if* the calling code doesn't
call free() on it. Make sure callers check pointer for sys_privs and
refrain from calling free, if so.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
https://sourceware.org/ml/newlib/2016/msg01139.htmlhttps://gcc.gnu.org/ml/gcc/2016-12/msg00010.html
There is no change if libtool is used.
Some run-time support libraries provided by GCC (e.g. libgomp) use
configure checks to detect certain features, e.g. availability of
thread-local storage. The configure script generates a test program and
tries to compile and link it. It should use target libraries and
startfiles of the build tree if available and not random ones from the
installation prefix for this procedure. The search directories
specified by -B are a bit special, see for_each_path() in gcc.c of the
GCC sources. First a search is performed on all search paths with the
multilib directory appended (if desired), then a second search is
performed on demand with the base directory only. For each multilib
there is a "newlib" subdirectory. This directory is specified by a -B
option for the support libraries. In order to find the newlib artifacts
(ctr0.o, libc.a, libg.a and libm.a) they must be located in a proper
multilib subdirectory withing the build directory.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
RTEMS defined SEM_VALUE_MAX to 32767 unlike other systems like FreeBSD
and glibc. A common value is INT_MAX.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
* libc/stdlib/strtod.c (strtof_l): Set errno to ERANGE when double to
float conversion results in infinity.
(strtof): Likewise.
* libc/stdlib/wcstod.c (wcstof_l): Likewise.
(wcstof): Likewise.
__sinit initialises some common file descriptors as line buffered and
relies on the first users of such FDs to call __smakebuf_r. If
__smakebuf_r realises there's no space for a buffer (malloc returns
NULL), it makes them unbuffered. However, while setting the __SNBF
bit, it doesn't clear the __SLBF bit in the flags. Depending on the
order in which functions check buffering flags in the FD, sometime
they assume it's line buffered (e.g. __sfvwrite_r), trashing
application memory that's not really been allocated to them.
This patch solves the problem by clearing the unbuffered/line buffered
flag when setting the line buffered/unbuffered flag.
GNU no longer encourages the use of documentation mirrors, to avoid
referring to obsolete documentation. Also www.fsf.org/manual/ is
just a redirect to www.gnu.org/manual/
Links to using-utils.html #fragments are no longer correct as each utility
is now a separate page, since 646745cb.
indiana.edu seems to have moved XLiveCD information, without a redirect.
Linking to clean_setup.pl on cygwin.com doesn't work, as direct downloads
aren't allowed, so instead state where it can be found on a mirror.
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Include ntsecapi.h where required and just redefine RtlGenRandom
correctly in the ntsecapi.h wrapper.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
In preparation of exporting getentropy/getrandom to userspace, rearrange
code a bit:
- Define RtlGenRandom in ntdll.h.
- Drop calls to getentropy in favor of RtlGenRandom (fhandler_socket,
fhandler_dev_random).
- Add try/except blocks in fhandler_dev_random to return EFAULT rather
than crashing if buffer pointer is invalid.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
NtOpenFile/NtCreateFile on non-existent paths on network drives has a
bug. Assuming a path Z:\dir\file. Further assuming that Z:\dir does
not exist.
The first NtOpenFile("Z:\dir\file") correctly returns
STATUS_OBJECT_PATH_NOT_FOUND. Subsequent calls incorrectly
return STATUS_OBJECT_NAME_NOT_FOUND.
This appears to be some kind of caching behaviour. Waiting a while
before repeating the call correctly returns STATUS_OBJECT_PATH_NOT_FOUND
again.
This patch works around the observed misbehaviour.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
So far, when converting from POSIX to Windows notation, cygwin_conv_path
fails to check for .exe suffix, so /path/foo did not return /path/foo.exe
even if this file exists.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
In the case of memcpy-armv7m.S being built for a big-endian multilib
(including armv7 without a specific profile), realignment code made
assumptions about the byte ordering being little-endian.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Ensure the Python Lex/Yacc (PLY) cache used by makedocbook is initialized
before it is used by parallelizable rules to make the DocBook XML, as it
appears that these can collide in cache generation, leading to errors.
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
In order to enable proper detection of thread-local storage availability
we have to provide some symbols on ARM.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
The original code only skipped the "./", but missed to test if more
trailing slashes are present. This in turn leads to invalid conversion.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Turn pthread_spinlock_t into a self-contained object. On uni-processor
configurations, interrupts are disabled in the lock/trylock operations
and the previous interrupt status is restored in the corresponding
unlock operations. On SMP configurations, a ticket lock is a acquired
and released in addition.
See also:
https://devel.rtems.org/ticket/2674
This implementation is simple and efficient. However, this test case of
the Linux Test Project would fail due to call of printf() and sleep()
during spin lock ownership:
https://github.com/linux-test-project/ltp/blob/master/testcases/open_posix_testsuite/conformance/interfaces/pthread_spin_lock/1-2.c
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Corinna Vinschen
Joel Sherrill
Pat Pannuto
Gedare Bloom
Joe Seymour
Johannes Schindelin
Jeff Johnston
Erik M. Bray
Sebastian Huber
Jon Turney
Julian Brown
Douglas