* Makefile.def (host-modules): Add gcc.
* Makefile.in: Regenerate.
* Makefile.tpl (sorry): New rule.
(configure-host, all-host, [+make_target+]-host, do-check,
install-host): Do not add gcc as a special case.
(host modules): Add a small special-casing for gcc. Export
extra_make_flags through the environment.
(maybe-configure-gcc, configure-gcc, maybe-all-gcc, all-gcc,
maybe-check-gcc, check-gcc, maybe-install-gcc, install-gcc,
other recursive targets for gcc): Remove.
(all, do-[+make_target+], do-check): Wrap between unstage and stage.
(stage, unstage): New rules.
(stage[+id+]-start, stage[+id+]-end, [+compare-target+],
distclean-stage[+id+]): Use stage_current.
([+bootstrap-target+], profiledbootstrap): Do not invoke manually
the stage*-start rules.
* configure.in: Add noconfigdirs for crx-*-*.
* configure: Regenerate.
2004-07-09 Loren J. Rittle <ljrittle@acm.org>
* configure.in: Build libmudflap by default on FreeBSD.
* configure: Regenerated.
2004-07-09 Mark Mitchell <mark@codesourcery.com>
* configure.in: Do not build libmudflap by default on non-GNU/Linux
systems.
* configure: Regenerated.
2004-07-08 John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
PR target/16344
* Makefile.tpl (profiledbootstrap): Build runtime libraries with
feedback based compiler.
* Makefile.in: Rebuilt.
2004-07-05 Phil Edwards <phil@codesourcery.com>
* configure.in: Do not prepend $srcdir to /dev/null in
makefile fragments.
* configure: Regenerate.
* Makefile.def (build_modules): Add bison, byacc, flex,
m4, texinfo.
(flags_to_pass): Add FLEX.
* Makefile.tpl (BUILD_DIR_PREFIX, BASE_EXPORTS): New.
(BUILD_EXPORTS, HOST_EXPORTS, BASE_TARGET_EXPORTS): Include it.
(DEFAULT_YACC, USUAL_YACC, DEFAULT_LEX, USUAL_LEX, DEFAULT_M4,
DEFAULT_MAKEINFO): Remove.
(CONFIGURED_YACC, CONFIGURED_FLEX, CONFIGURED_BISON,
CONFIGURED_LEX, CONFIGURED_M4, CONFIGURED_MAKEINFO): Substitute.
(YACC, FLEX, BISON, LEX, M4, MAKEINFO): Define to look into
objdir or else use configured tool.
(all-build): New.
(all): Depend on it.
(Build module dependencies): Add.
* Makefile.in: Regenerate.
* configure.in: Better support for multiple build modules,
matching what is done for host/target modules. Do not look
for "plausible" locations of build tools if Canadian cross.
Use autoconf's AC_PROG_CC to find a C compiler. Define
BUILD_DIR_PREFIX. Look for flex, makeinfo and m4.
* configure: Regenerate.
* Makefile.tpl (touch-stage[+id+]): New.
(restage[+prev+]): Depend on touch-stage[+id+].
* Makefile.tpl (RECURSE_FLAGS_TO_PASS): New.
Use it throughout.
* Makefile.def: Add profile and feedback bootstrap stages.
Remove next field from bootstrap stages.
* Makefile.tpl (LN, LN_S): Substitute.
(stageN-start, stageN-end): Use double-colon rules, to
provide a hook for additional setup commands.
(distclean-stageN-gcc, restageN): Create dependencies from
[+prev+], not from [+next+].
(stageN-bubble): Add commands for successive stages from
[+prev+], using double-colon rules.
(all-stageN-gcc): Fix typo.
(stagefeedback-start, profiledbootstrap): New.
* Makefile.in: Regenerate.
* configure.in: Call ACX_PROG_LN.
* configure: Regenerate.
config/ChangeLog:
2004-06-09 Paolo Bonzini <bonzini@gnu.org>
* acx.m4 (ACX_PROG_LN): From gcc, modified to
accept a parameter.
* Makefile.tpl (all.normal): Rename to all.
(all): Replace with a rule to pick the default
target from configure.
(all-gcc, configure-gcc): Use conditionals to
do nothing when toplevel bootstrap is going on.
(GCC directory bootstrap) [gcc-bootstrap]: Disable.
(Toplevel bootstrap) [gcc-no-bootstrap]: Disable.
* configure.in: Support --enable-bootstrap.
* Makefile.def: Remove new- prefix from toplevel
bootstrap targets.
* Makefile.tpl: Likewise.
* Makefile.def: Add bootstrap_stage 4. Add bootstrap2
target.
* Makefile.tpl (Toplevel bootstrap): Pass $(BASE_FLAGS_TO_PASS)
$(RECURSE_FLAGS) to recursive invocation of make.
* Makefile.in: Regenerate.
* configure: Regenerate.
(STAGE_HOST_EXPORTS, BASE_TARGET_EXPORTS, RAW_CXX_TARGET_EXPORTS)
(NORMAL_TARGET_EXPORTS): New macros. Use them in all the recursive
targets.
* Makefile.in: Regenerate.
* Makefile.tpl: Whenever a recursive target is defined, wrap
it in a special @if/@endif block, and prepare its maybe
dependency in the @if/@endif block
* configure.in: Instead of writing maybe dependencies, remove
the @if/@endif statements, and remove the @if/@endif blocks
that remain.
* configure: Regenerate.
* Makefile.in: Regenerate.
2004-04-27 Paolo Bonzini <bonzini@gnu.org>
Revert:
2004-04-26 Paolo Bonzini <bonzini@gnu.org>
* Makefile.def (flags_to_pass): Remove *dir variables that
are passed to the modules via TOPLEVEL_CONFIGURE_ARGUMENTS,
as well as prefix and exec_prefix.
* Makefile.in: Regenerate.
2004-04-26 Paolo Bonzini <bonzini@gnu.org>
* Makefile.def (host_modules): Mark with the bootstrap
flag packages on which gcc depends.
* Makefile.tpl (all-bootstrap): Use it.
* Makefile.in: Regenerate.
2004-04-26 Paolo Bonzini <bonzini@gnu.org>
* Makefile.def (flags_to_pass): Remove *dir variables that
are passed to the modules via TOPLEVEL_CONFIGURE_ARGUMENTS,
as well as prefix and exec_prefix.
* Makefile.in: Regenerate.
2004-04-26 Paolo Bonzini <bonzini@gnu.org>
* configure.in: Invoke ACX_PROG_CMP_IGNORE_INITIAL.
* configure: Regenerate.
* config/acx.m4: Mutuate ACX_PROG_CMP_IGNORE_INITIAL from gcc.
* gcc/Makefile.tpl (compare): Use the result of the test.
* gcc/Makefile.in: Regenerate.
2004-04-23 Paolo Bonzini <bonzini@gnu.org>
* Makefile.tpl (all-stage1-gcc, all-stage2-gcc, all-stage3-gcc):
Always relocate gcc and prev-gcc to the original names, even
if the build fails.
(new-cleanstrap, new-restage1, new-restage2, new-restage3):
New targets.
PR bootstrap/14871
* Makefile.tpl: If we don't have built-in-tree target tools,
use the ones found by configure rather than hacking around with
program_transform_name.
* configure.in: Give Makefile.tpl the information necessary
to do that.
* Makefile.in: Regenerate.
* configure: Regenerate.
2004-04-06 Nathanael Nerode <neroden@gcc.gnu.org>
PR bootstrap/14760
* configure.in: When computing baseargs, strip *all* copies of
offending options. Also, don't match/substitute the trailing space,
so that this actually works when two similar options are separated by
only one space.
* configure: Regenerate.
2004-04-06 David Edelsohn <edelsohn@gnu.org>
* configure.in (powerpc-*-aix*): Remove target-libada from noconfigdirs.
(rs6000-*-aix*): Same.
* configure: Regenerate.
to set @stage2_werror_flag@.
* configure: Regenerate.
* Makefile.tpl (top level bootstrap support): Pass
@stage2_werror_flag@ down to configure in stages 2 and 3.
* Makefile.in: Regenerate.
* Makefile.tpl (new-bootstrap): Set CC and CC_FOR_BUILD in configure
for stages 2 and 3 as well as in make. As a consequence, remove
OUTPUT_OPTION (now detected by configure) from the flags passed down
to make.
* Makefile.in: Regenerate.
* Makefile.tpl (new-bootstrap): Fix typo.
* Makefile.in: Regenerate.
into their proper sections.
* Makefile.tpl (top level bootstrap support): Move disabling
of coverage flags from 'make' to 'configure'; improve comments.
* Makefile.in: Regenerate.
* Makefile.tpl (experimental top level bootstrap) Move stage1
language setting from all- target to configure- target; disable
intermodule optimization in stage 1; prevent gratuitous rebuilds
of stage 1.
* Makefile.in: Regenerate.
* configure.in: Comma-separate stage 1 language list for top
level bootstrap.
* configure: Regenerate.
* Makefile.tpl: Clean up experimental top level bootstrap support:
note known problems; set CONFIG_SHELL; don't set BUILD_CC; relocate
prev-gcc in configure- targets as well as all- targets.
* Makefile.in: Regenerate.
* configure.in: Switch more things to use maybe dependencies.
* Makefile.tpl: Switch more things to use maybe dependencies.
Factor out common code from autogen IF statements.
* configure: Regenerate.
* Makefile.in: Regenerate.
* configure.in: Switch more things to use maybe dependencies.
Rearrange a little. Use GCC_TOPLEV_SUBDIRS.
* configure: Regenerate.
* Makefile.tpl: Switch more things to use maybe dependencies.
* Makefile.in: Regenerate.
<config>
* config/acx.m4: Introduce _GCC_TOPLEV_NONCANONICAL_BUILD,
_GCC_TOPLEV_NONCANOICAL_HOST, _GCC_TOPLEV_NONCANONICAL_TARGET,
GCC_TOPLEV_SUBDIRS.
(multilib.ts): ... this. Moved into...
(multilib.out): ... this. Don't use sub-make.
($(BUILD_SUBDIR)/[+module+]/Makefile, [+module+]/Makefile,
$(TARGET_SUBDIR)/[+module+]/Makefile, gcc/Makefile): Moved into...
(configure-build-[+module+], configure-[+module+],
configure-target-[+module+], configure-gcc): ... these. Test
for Makefile existence. Drop config.status from dependencies.
* Makefile.in: Rebuilt.
* configure.in: Move gcc-version-trigger to the end of
ac_configure_args. Add comments to maybedep.tmp and
serdep.tmp. Introduce --disable-serial-configure. Remove
nonopt from baseargs, matching and removing corresponding
whitespace while at it.
* configure: Rebuilt.
program_transform_name to standard idiom.
(AUTOGEN, AUTOCONF): Define.
(Makefile.in): Use $(AUTOGEN).
(Makefile): Depend on config.status, and use autoconf-style rule to
build it. Move original commands to...
(config.status): ... this new target.
(configure): Add $(srcdir). Depend on config/acx.m4. Use
$(AUTOCONF).
* Makefile.in: Rebuilt.
* Makefile.tpl: Change dependency for */multilib.out so that
it works when gcc isn't in the tree.
* configure.in: Substitute more.
* configure: Run subconfigures from the Makefile.
* Makefile.tpl: Run subconfigures from the Makefile; add a few
convenience targets. Make sure gcc isn't rebuilt after bootstrap.
* configure.in: ...to here.
* configure.in: Separate subconfigure options added by this file from
options given by the user. Add machinery to put args for host
subconfigures into the Makefile.
* Makefile.tpl: Remove 'vault' targets.
* Makefile.tpl: Reorder and comment dependencies.
* Makefile.in: Regenerate.
(Continuing slow-motion replay)
* configure: More autoconf-style substitutions.
* Makefile.tpl: More autoconf-style substitutions.
* Makefile.in: Regenerate.
2002-11-30 Nathanael Nerode <neroden@gcc.gnu.org>
(Continuing slow-motion replay)
* configure: Substitute more variables in a more autoconf-friendly
way. Simplify slightly.
* Makefile.tpl: Make more variables substitutable in an
autoconf-friendly way.
* Makefile.in: Regenerate.
(Starting slow-motion replay merge from gcc 3.4 b-i-b branch)
* configure: Remove 'removing', which doesn't work. Replace $subdir
with . everywhere. Replace $subdirs with ''. Replace $makesrcdir
with $srcdir. Reformat indentation. Substitute some variables
formerly hard-coded in the Makefile for build=host.
* Makefile.tpl: Autogenerate more; make more autoconf-friendly.
* Makefile.def: Autogenerate more.
* Makefile.in: Regenerate.
* Makefile.tpl: Make SET_LIB_PATH substitution more autoconfy.
* Makefile.tpl: Make RPATH_ENVVAR substitution more autoconfy.
* configure.in: Make SET_LIB_PATH substitution more autoconfy.
* configure.in: Make RPATH_ENVVAR substitution more autoconfy.
* Makefile.in: Regenerate.
* Makefile.tpl: Make more autoconf-friendly.
* Makefile.in: Regenerate.
* configure: Make substitution more autoconf-like.
2002-09-28 Richard Earnshaw <rearnsha@arm.com>
* configure.in (arm-*-coff, strongarm-*-coff, xscale-*-coff): Use a
single entry to handle all these.
(arm-*-elf, strongarm-*-elf, xscale-*-elf): Likewise. Also enable
libjava on arm-*-elf.
* Makefile.def: New file.
* Makefile.tpl: New file.
* Makefile.in: Generate from Makefile.tpl with 'autogen Makefile.def'.
* configure.in: Minor rearrangement. Simplify tests.
(do-tar, do-bz2): New rules.
(taz): Update. Replace do-tar-bz2 with do-tar and do-bz2.
(gdb-tar): New rule.
(gdb-taz): Rewrite. Use gdb-tar and do-bz2.
(insight_dejagnu.tar): New rule.
(insight.tar): New rule.
(gdb+dejagnu.tar): New rule.
(gdb.tar): New rule.
* Makefile.in (TARGET_CONFIGARGS, BUILD_CONFIGARGS): Replace
CONFIG_ARGUMENTS.
(ALL_BUILD_MODULES_LIST, BUILD_CONFIGDIRS, BUILD_SUBDIR):
New variables.
(ALL_BUILD_MODULES, CONFIGURE_BUILD_MODULES): New variables
and rules.
(all.normal): Depend on ALL_BUILD_MODULES.
(CONFIGURE_TARGET_MODULES rule): Use TARGET_CONFIGARGS.
(all-build-libiberty): Depend on configure-build-libiberty.
* configure: Calculate and substitute proper value for
ALL_BUILD_MODULES.
* configure.in: Create the build subdirectory.
Calculate and substitute TARGET_CONFIGARGS (formerly
CONFIG_ARGUMENTS); also BUILD_SUBDIR and BUILD_CONFIGARGS (new).
DLLTOOL_FOR_TARGET, WINDRES_FOR_TARGET, AR_FOR_TARGET,
RANLIB_FOR_TARGET, NM_FOR_TARGET): Don't use double quotes to
avoid quotes nesting problems.
(NATIVE_CHECK_MODULES): Ditto, just for consistency.
(DO_X): Export only variables that are set.
(ALL_GCC_C, ALL_GCC_CXX): New macros. Use them as dependencies of
configure-target-<library> when their configure scripts need the C
or C++ library to have already been built to work properly.
(do_proto_toplev): Set them to an empty string.
(CROSS_CHECK_MODULES,INSTALL_MODULES,CLEAN_MODULES): Similarily.
(all-cgen): New target.
(all-opcodes,all-sim): Depend on all-cgen.
* configure.in (host_tools): Add cgen.
Only configure cgen if --enable-cgen-maint.
(GCC_FOR_TARGET): Use it.
(CC_FOR_TARGET, CXX_FOR_TARGET, CHILL_FOR_TARGET): Now defined...
* configure.in: ... here.
(FLAGS_FOR_TARGET): Define. Add ld build dir to -L path.
(libstdcxx_flags): Define and append to CXX_FOR_TARGET.
* configure: Revert changes made on May 18 and May 19.
* Makefile.in (CC_FOR_TARGET): Make sure as/ld in the gcc
directory are used if they exist. Make sure
$(build_tooldir)/include is searched for header files,
$(build_tooldir)/lib/ for library files.
(GCC_FOR_TARGET): Likewise.
(CXX_FOR_TARGET): Likewise.
(do-md5sum): New target.
(MD5PROG): Define.
(PACKAGE): Default to TOOL.
(VER): Default to a shell script.
(taz): Rewrite target. Move real work to do-proto-toplev. Include
md5 checksum generation.
(do-proto-toplev): New target. Create $(PACKAGE)-$(VER) link.
(do-tar-bz2): Delete creation of $(PACKAGE)-$(VER) link.
(gdb.tar.bz2, dejagnu.tar.bz2, gdb+dejagnu.tar.bz2,
insight.tar.bz2): Use gdb-taz to create archive.
Paolo Bonzini
Alexandre Oliva
DJ Delorie
Zack Weinberg
Jim Wilson
Nathanael Nerode
H.J. Lu
Keith Seitz
Andreas Jaeger
Chris Demetriou
Daniel Jacobowitz
Michael Chastain
Jason Merrill
Frank Ch. Eigler
Tom Tromey
Andreas Schwab
Kevin Buettner
Nick Clifton
Andrew Cagney
Ben Elliston
Richard Henderson
Mo DeJong
Jeff Holcomb
Hans-Peter Nilsson
Alan Modra
Doug Evans
Christopher Faylor
Jason Molenda
Ian Lance Taylor