* configure.in: Change check for libc/include in ${CC} to
use an intermediate value so as to work with different shells.
* configure: Regenerated.
* Makefile.in: Ditto.
timeslice' wait.
(setup_handler): Revamp YA to attempt to deliver signal multiple times on
failure rather than punting to wait_sig.
* miscfuncs.cc (low_priority_sleep): Accept INFINITE sleep to mean "don't reset
the priority after setting it to idle". Return previous priority.
* winsup.h (SLEEP_0_STAY_LOW): Define.
(low_priority_sleep): Return an int.
* sigproc.h: Define WAIT_SIG_PRIORITY here.
* sigproc.cc: Remove WAIT_SIG_PRIORITY definition.
* libc/machine/h8300/setjmp.S (setjmp, longjmp): Combine common
code for __H8300H__ and __H8300S__. Also return 32-bit return code
when -mint32 is used.
Undeclare internal_getpwent. Define DEFAULT_UID_NT. Change
DEFAULT_GID.
* passwd.cc (internal_getpwsid): New function.
(internal_getpwent): Suppress.
(read_etc_passwd): Make static. Rewrite the code for the completion
line. Set curr_lines to 0.
(parse_pwd): Change type to static int. Return 0 for short lines.
(add_pwd_line): Pay attention to the value of parse_pwd.
(search_for): Do not look for nor return the DEFAULT_UID.
* grp.cc (read_etc_group): Make static. Free gr_mem and set
curr_lines to 0. Always call add_pwd_line. Rewrite the code for the
completion line.
(internal_getgrsid): New function.
(parse_grp): If grp.gr_mem is empty, set it to &null_ptr.
Never NULL gr_passwd.
(getgrgid32): Only return the default if ntsec is off and the gid is
ILLEGAL_GID.
* sec_helper.cc (cygsid::get_id): Use getpwsid and getgrsid.
(cygsid_getfrompw): Clean up last line.
(cygsid_getfromgr): Ditto.
(is_grp_member): Use getpwuid32 and getgrgid32.
* uinfo.cc (internal_getlogin): Set DEFAULT_GID at start.
Use getpwsid. Move the read of /etc/group after the second access
to /etc/passwd. Change some debug_printf.
just in case an access_denied ACE follows an access_allowed.
Handle the case owner_sid == group_sid, with a FIXME.
Remove unnecessary tests for non-NULL PSIDs.
(alloc_sd): Use existing owner and group sids if {ug}id == -1.
Handle case where owner_sid == group_sid.
Do not call is_grp_member. Try to preserve canonical ACE order.
Remove unnecessary tests for non-NULL PSIDs. Reorganize
debug_printf's.
(get_initgroups_sidlist): Put well_known_system_sid on left
side of ==.
(add_access_denied_ace): Only call GetAce if inherit != 0.
(add_access_allowed_ace): Ditto. Use appropriate sizeof.
* syscalls.cc (chown_worker): Pass {ug}id equal to -1 to
alloc_sd, which removes the need to obtain old_{ug}id.
(chmod): Remove call to get_file_attribute (), simply pass
{ug}id equal to -1 to alloc_sd.
* h8300.h (h8_opcode): Remove 'noperands', 'idx', and 'size'
fields.
(h8_opcodes). Modify initializer and initializer macros to no
longer initialize the removed fields.
* h8300.h (h8_opcode): Remove 'length' field.
(h8_opcodes): Mark as 'const' (both the declaration and
definition). Modify initializer and initializer macros to no
longer initialize the length field.
2002-11-11 Klee Dienes <kdienes@apple.com>
* h8300-dis.c: Include libiberty.h (for xmalloc).
(struct h8_instruction): New type, used to wrap h8_opcodes with a
length field (computed at run-time).
(h8_instructions): New variable.
(bfd_h8_disassemble_init): Allocate the storage for
h8_instructions. Fill h8_instructions with pointers to the
appropriate opcode and the correct value for the length field.
(bfd_h8_disassemble): Iterate through h8_instructions instead of
h8_opcodes.
* arc.h (arc_ext_opcodes): Declare as extern.
(arc_ext_operands): Declare as extern.
* i860.h (i860_opcodes): Declare as const.
2002-11-18 Klee Dienes <kdienes@apple.com>
* arc-opc.c (arc_ext_opcodes): Define.
(arc_ext_operands): Define.
* i386-dis.c (Suffix3DNow): Declare as const.
* arm-opc.h (arm_opcodes): Declare as const.
(thumb_opcodes): Declare as const.
* h8500-opc.h (h8500_table): Declare as const.
(h8500_table): Use a NULL for the opcode in the terminator, so
that code testing (opcode->name) behaves correctly.
* mcore-opc.h (mcore_table): Declare as const.
* sh-opc.h (sh_table): Declare as const.
* w65-opc.h (optable): Declare as const.
* z8k-opc.h (z8k_table): Declare as const.
parameters. Added support for new opcode-list format. General
error message fixups.
(c4x_inst_add): Reject insn not for our CPU
(md_begin): Added matrix for setting the proper opcode-level &
device-flags according to cpu type and revision. Rewrite the
opcode hasher.
(c4x_operand_parse): Fix opcode bug
(c4x_operands_match): New function argument. Added dry-run
mechanism, that is optional error generation. Added constraint 'i'
and 'j'.
(c4x_insn_check): Added new function for post-verification of the
generated insn.
(md_assemble): Check all opcodes before croaking because of an
argument mismatch. Need this to be able to fully support
ortogonally arguments.
(md_parse_options): Revised commandprompt swicthes and added new
ones.
(md_show_usage): Complete rewrite of printout.
* gas/testsuite/gas/tic4x/addressing.s: Fix bug in one insn
* gas/testsuite/gas/tic4x/addressing_c3x.d: Update thereafter
* gas/testsuite/gas/tic4x/addressing_c4x.d: Update thereafter
* gas/testsuite/gas/tic4x/allopcodes.S: Add support for new
opclass.h changes
* gas/testsuite/gas/tic4x/opclasses.h: Added testsuites for
the new enhanced opcodes.
* gas/testsuite/gas/tic4x/opcodes.s: Regenerate
* gas/testsuite/gas/tic4x/opcodes_c3x.d: Update from above
* gas/testsuite/gas/tic4x/opcodes_c4x.d: Update from above
* gas/testsuite/gas/tic4x/opcodes_new.d: Added new testsuite for
the enhanced and special insns.
* gas/testsuite/gas/tic4x/tic4x.exp: Added the opcodes_new testsuite
* include/opcode/tic4x.h: File reordering. Added enhanced opcodes.
* opcodes/tic4x-dis.c: Added support for enhanced and special
insn.
(c4x_print_op): Added insn class 'i' and 'j'
(c4x_hash_opcode_special): Add to support special insn
(c4x_hash_opcode): Update to support the new opcode-list
format. Add support for the new special insns.
(c4x_disassemble): New opcode-list support.
(c4x_operands_match): Added check for 8-bits LDF insn. Give
warning when using constant direct bigger than 2^16. Add the new
arguments.
* include/opcode/tic4x.h: Major rewrite of entire file. Define
instruction classes, and put each instruction into a class.
* opcodes/tic4x-dis.c: (c4x_print_op): Add support for the new
argument format. Fix bug in 'N' register printer.
idle if pending signals to allow other threads to get into interruptible state.
* miscfuncs.cc (sys_mbstowcs): Save current thread in variable to avoid an OS
call.
* wait.cc (wait_sig): Reset thread priority each time through loop since the
priority may have been set down to deal with pending signals.
* testsuite/lib/passfail.exp (newlib_pass_fail): Changed to
only issue one pass/fail message for a compile/link/execute.
* testsuite/newlib.elix/elix.exp: New file.
* testsuite/newlib.elix/tmmap.c: Ditto.
token if process is in impersonated state.
* sec_helper.cc (is_grp_member): Rewrite. Call getgroups32 only
for current user. Scan passwd and group info otherwise.
is supposed to be giving up time slice.
* fhandler_console.cc (fhandler_console::read): Switch button 2/3 output escape
sequences to be consistent with xterm.
Jeff Johnston
Christopher Faylor
Corinna Vinschen
Klee Dienes
Svein Seldal
Nick Clifton
David Starks-Browning
Danny Smith
DJ Delorie