check for file. Files should already be set. Report on binary mode for
debugging.
(fhandler_base::fhandler_base): Don't set default binmode here. That's for
later.
* fhandler_console.cc (fhandler_console::output_tcsetattr): Don't set binmode,
ever, for console.
* fhandler_disk_file.cc (fhandler_disk_file::open): Always set the binary mode
to the value derived from mount table.
* path.cc (mount_info::conv_to_win32_path): Default to binmode if path does not
translate into anything in the mount table.
* fhandler.h (fhandler_proc::fill_filebuf): Take a pinfo argument.
* fhandler_proc.cc (fhandler_proc::get_proc_fhandler): Simplify search for
given pid.
(fhandler_proc::readdir): Assume that pid exists if it shows up in the winpid
list.
* fhandler_process.cc (fhandler_process::open): Simplify search for given pid.
Call fill_filebuf with pinfo argument.
(fhandler_process::fill_filebuf): Pass pinfo here and assume that it exists.
* pinfo.h (pinfo::remember): Define differently if sigproc.h is not included.
* dll_init.cc (dll_list::detach): Don't run destructor on exit.
* syscalls.cc (stat_worker): Calculate dev and ino calculation here, if zero.
* fhandler_proc.cc (fhandler_proc::fhandler_proc): Minor reorg for debugging.
* fhandler_process.cc (fhandler_process::exists): Return 0 on nonexistence.
(fhandler_process::fstat): Simplify pid logic.
* fhandler_tape.cc (fhandler_dev_tape::fstat): Minor reformatting.
(LoadFuncEx2): Adapted from LoadFuncEx. Provides control of return value for
nonexistent function.
(NtQueryObject): Declare.
(IsDebuggerPresent): Declare via LoadFuncEx2 and always return true if not
available.
* debug.h (being_debugged): Just rely on IsDebuggerPresent return value.
* dtable.cc (handle_to_fn): New function.
(dtable::init_std_file_from_handle): Attempt to derive std handle's name via
handle_to_fn.
(dtable::build_fhandler_from_name): Fill in what we can in path_conv structure
when given a handle and path doesn't exist.
* fhandler.cc (fhandler_base::open): Don't set the file pointer here. Use
pc->exists () to determine if file exists rather than calling GetFileAttributes
again.
* fhandler.h (fhandler_base::exec_state_isknown): New method.
(fhandler_base::fstat_helper): Add extra arguments to declaration.
(fhandler_base::fstat_by_handle): Declare new method.
(fhandler_base::fstat_by_name): Declare new method.
* fhandler_disk_file (num_entries): Make __stdcall.
(fhandler_base::fstat_by_handle): Define new method.
(fhandler_base::fstat_by_name): Define new method.
(fhandler_base:fstat): Call fstat_by_{handle,name} as appropriate.
(fhandler_disk_file::fstat_helper): Accept extra arguments for filling out stat
structure. Move handle or name specific stuff to new methods above.
(fhandler_disk_file::open): Use real_path->exists rather than calling
GetFileAttributes again.
* ntdll.h (FILE_NAME_INFORMATION): Define new structure.
(OBJECT_INFORMATION_CLASS): Partially define new enum.
(OBJECT_NAME_INFORMATION): Define new structure.
(NtQueryInformationFile): New declaration.
(NtQueryObject): New declaration.
* path.cc (path_conv::fillin): Define new method.
* path.h (path_conv::fillin): Declare new method.
(path_conv::drive_thpe): Rename from 'get_drive_type'.
(path_conv::volser): Declare new method.
(path_conv::volname): Declare new method.
(path_conv::root_dir): Declare new method.
* syscalls.cc (fstat64): Send real path_conv to fstat as second argument.
(path_conv): Add normalized_path field.
* path.cc (path_conv::~path_conv): New destructor.
(path_conv::check): Set normalized_path, where appropriate.
* dtable.cc (build_fhandler_from_name): Use normalized path from path_conv.
* syscalls.cc (chroot): Ditto.
* cygheap.h: Remove path_prefix_p declaration. Christopher Faylor
<cgf@redhat.com> (minor fixups)
* Makefile.in: Add fhandler_proc.o, fhandler_registry.o, fhandler_process.o and
fhandler_virtual.o.
* dtable.cc (dtable::build_fhandler): Add entries for FH_PROC, FH_REGISTRY and
FH_PROCESS. Set unix_name to the normalized posix path.
* fhandler.h: Add constants for FH_PROC, FH_REGISTRY and FH_PROCESS. Add class
declarations for fhandler_virtual, fhandler_proc, fhandler_registry and
fhandler_virtual. Update fhandler_union accordingly.
* fhandler_proc.cc: New file. Add implementation for fhandler_proc.
* fhandler_virtual.cc: New file. Add implementation for fhandler_virtual.
* fhandler_process.cc: New file. Add implementation for fhandler_process.
* fhandler_registry.cc: New file. Add implementation for fhandler_registry.
* path.cc: Add isproc and isvirtual_dev macros.
* path.cc (path_conv::check): Add check for virtual devices.
* path.cc (mount_info::conv_to_win32_path): Convert paths in /proc to empty
Win32 paths.
* path.cc (chdir): Replace check for FH_CYGDRIVE with more generic
isvirtual_dev macro. Force setting of posix path for virtual fhandlers.
* path.h: Add externally visible path_prefix_p and normalized_posix_path
prototypes.
* exceptions.cc (try_to_debug): Spin only as long as we don't have a debugger
attached.
* fhandler.h (fhandler_base::set_nohandle): New method.
(fhandler_base::get_nohandle): New method.
* fhandler.cc (fhandler_base::dup): Avoid duplicating handle if there is no
handle.
* fhandler_disk_file.cc (fhandler_disk_file::opendir): Set nohandle flag on
dummy fd.
* Makefile.in: Make intermediate library for eventual inclusion in libcygwin.a
* fhandler.h (fhandler_pipe::fhandler_pipe): Remove default argument setting
since it is no longer used.
* miscfuncs.cc (check_null_str): New function.
(+check_null_str_errno): Ditto.
* net.cc: Add defensive buffer checking throughout.
(cygwin_sendto): Protect against invalid fd.
(cygwin_recvfrom): Ditto.
(cygwin_getpeername): Ditto.
(cygwin_recv): Ditto.
(cygwin_send): Ditto.
* winsup.h: Declare a new function.
* select.cc (set_bits): Fix conditional for setting fd in exceptfds.
* dtable.cc (dtable::build_fhandler): Create fhandler_pipe using correct device
type.
* path.cc (get_devn): Set correct pipe device type from device name.
methods for setting src pointer.
* dir.cc (opendir): Only pass path_conv argument to opendir, since name is
already part of the fhandler.
* dtable.cc (dtable::build_fhandler): Accomodate new FH_CYGDRIVE type.
* fhandler.cc (fhandler_base::opendir): Nuke name argument.
* fhandler.h: Add FH_CYGDRIVE to "device" enum.
(fhandler_base::opendir): Nuke name argument.
(fhandler_disk_file::opendir): Ditto.
(fhandler_disk_file::fhandler_disk_file): Declare new method which passes
devtype through.
(fhandler_cygdrive): Add elements for tracking drives.
(fhandler_cygdrive::set_drives): Declare new method.
(fhandler_cygdrive::iscygdrive_root): Declare new method.
(fhandler_cygdrive::opendir): Declare new method.
(fhandler_cygdrive::readdir): Declare new method.
(fhandler_cygdrive::telldir): Declare new method.
(fhandler_cygdrive::seekdir): Declare new method.
(fhandler_cygdrive::rewinddir): Declare new method.
(fhandler_cygdrive::closedir): Declare new method.
(fhandler_cygdrive::fstat): Declare new method.
* fhandler_disk_file.cc (fhandler_disk_file::fhandler_disk_file): Define new
method which passes devtype through.
(fhandler_disk_file::open): Tweak debug output.
(fhandler_disk_file::opendir): Nuke first argument. Use info from path_conv
and class rather than calling fstat.
(fhandler_cygdrive::set_drives): New method.
(fhandler_cygdrive::iscygdrive_root): New method.
(fhandler_cygdrive::opendir): New method.
(fhandler_cygdrive::readdir): New method.
(fhandler_cygdrive::telldir): New method.
(fhandler_cygdrive::seekdir): New method.
(fhandler_cygdrive::rewinddir): New method.
(fhandler_cygdrive::closedir): New method.
(fhandler_cygdrive::fstat): New method.
* path.cc (iscygdrive_device): Assume cygdriveness is already verified.
(path_conv::check): Treat FH_CYGDRIVE "method" as a special case, setting file
attributes as needed.
(mount_info::conv_to_win32_path): Allow stand-alone /cygdrive, meaning "the
directory which contains all of the drives on the system".
(fillout_mntent): Use cyg_tolower for conversions.
(mount_info::cygdrive_win32_path): Replace unused argument with unit number.
* shared_info.h (mount_info::cygdrive_win32_path): Reflect argument change.
* cygheap.h (cygheap_fdnew::operator =): New operator.
* dir.cc: Add invalid struct checking throughout. Use methods for all
directory manipulation throughout.
* fhandler.cc: Move fhandler_disk_file stuff to own file.
(fhandler_base::opendir): New method.
(fhandler_base::readdir): New method.
(fhandler_base::telldir): New method.
(fhandler_base::seekdir): New method.
(fhandler_base::rewinddir): New method.
(fhandler_base::closedir): New method.
* fhandler_disk_file.cc: New file.
* fhandler.h (fhandler_base): Declare new virtual methods.
(fhandler_disk_file): Ditto.
(fhandler_cygdrive): New class.
* path.cc (conv_path_list): Use strccpy to break apart path.
and creation time to last modification time for files on filesystems
not supporting multiple timestamps.
(fhandler_disk_file::fstat_helper): Set access time and creation
time in incoming Windows structure instead of in stat buf to avoid
incorrectly overwriting Epoch timestamp.
and HIDDEN_DOT_FILES is defined.
* fhandler.cc (fhandler_base::open): Ditto.
* path.cc (symlink): Ditto.
* syscalls.cc (_rename): Ditto and remove HIDDEN file attribute if
new filename does not begin with a dot.
device.
* fhandler.h (fhandler_base::set_eof): New virtual method.
(fhandler_pipe::set_eof): New method.
* pipe.cc (fhandler_pipe::fhandler_pipe): Clear saweof flag.
(fhandler_pipe::read): Return immediately if hit eof.
(fhandler_pipe::hit_eof): Return true if saweof flag is set.
* select.cc (peek_pipe): Don't call PeekNamedPipe if we couldn't grab the guard
mutex.
* fhandler.cc (fhandler_base::close): Show both name and handle in debugging
output.
* fhandler.h (fhandler_base::get_guard): New virtual method.
(fhandler_pipe::get_guard): New method.
(fhandler_socket::ready_for_read): Delete declaration.
(fhandler_pipe::ready_for_read): Ditto.
(fhandler_serial::ready_for_read): Ditto.
(fhandler_console::ready_for_read): Ditto.
(fhandler_tty_common::ready_for_read): Ditto.
(fhandler_windows::ready_for_read): Ditto.
(struct select_record::peek): Declare new method.
* select.cc (MAKEready): Delete.
(peek_pipe): Use get_guard method to retrieve potential guard mutex handle.
(fhandler_base::ready_for_read): Rewrite as generic ready-for-read handler.
Should only be called for "slow" devices.
(fhandler_socket::ready_for_read): Delete definition.
(fhandler_pipe::ready_for_read): Ditto.
(fhandler_serial::ready_for_read): Ditto.
(fhandler_console::ready_for_read): Ditto.
(fhandler_tty_common::ready_for_read): Ditto.
(fhandler_windows::ready_for_read): Ditto.
(fhandler_pipe::select_read): Fill in new peek record in select_record
structure.
(fhandler_console::select_read): Ditto.
(fhandler_tty_common::select_read): Ditto.
(fhandler_serial::select_read): Ditto.
(fhandler_socket::select_read): Ditto.
(fhandler_socket::select_read): Ditto.
(fhandler_tty_slave::ready_for_read): Check for tty not open. Set errnos
appropriately.
* syscalls.cc (_read): Allow ready_for_read to set errno.
* pinfo.cc (pinfo::init): Return spawn/NO_WAIT process as valid if it is
initializing.
* sigproc.cc (getsem): Adjust wait for process to initialize downward to avoid
huge waits.
macro.
(setclexec_pid): Replace old handle with new handle.
* debug.h: Reflect change in arguments for setclexec_pid.
* fhandler.cc (fhandler_base::set_inheritance): Ditto.
(fhandler_base::fork_fixup): Ditto.
* cygerrno.h: Reflect return value change for set_errno.
winsock.
* fhandler.cc (fhandler_base::set_inheritance): Make debugging output more
verbose.
* fhandler_socket.cc (fhandler_socket::fixup_after_fork): Force loading of
winsock32 if winsock2 not available.
* net.cc (set_socket_inheritance): Use DuplicateHandle in all cases to set
inheritance correctly.
(fdsock): Use winsock2_active macro to determine when to set socket
inheritance. Remove fdtab resource locking since this function should already
be protected.
(cygwin_accept): Simplify logic. Ensure that fdtab unlock is not called
inappropriately.
(cygwin_rcmd): Use fdtab locking.
(cygwin_rresvport): Ditto.
(cygwin_rexec): Ditto.
* select.cc (peek_socket): Set errno appropriately if winsock select fails.
* winsup.h: Declare check_pty_fds.
* syscalls.cc (check_pty_fds): Rename from check_ttys_fds. Also check pty
master.
(setsid): Use check_pty_fds.
* dtable.cc (dtable::dec_console_fds): Add check on pty fds.
SNDCTL_DSP_GETBLKSIZE operation. Remove obsolete 'name' arg from fhandler_*
constructors throughout.
* winsup.h (winsock_active): New macro.
(winsock2_active): Ditto.
* autoload.cc (wsock_init): Use new macros to decide if winsock or winsock2 is
loaded.
(nonexist_wsock32): Dummy function to force winsock load.
(nonexist_ws2_32): Dummy function to force winsock2 load.
* fhandler.h (fhandler_socket::fstat): Declare new method. Currently unused.
* fhandler_socket.cc (fhandler_socket::fixup_before_fork_exec): Check that
winsock2 is active before trying WSADuplicateSocketA.
(fhandler_socket::fixup_after_fork): Add extra check for winsock2_active.
Otherwise use iffy procedures for Windows 95.
(fhandler_socket::fixup_after_exec): Add debugging.
(fhandler_socket::dup): Add debugging.
(fhandler_socket::fstat): New method.
(fhandler_socket::set_close_on_exec): Attempt to perform iffy stuff on Windows
95.
* errno.cc (_sys_nerr): Work around compiler strangeness.
* pinfo.cc (winpids::add): Add extra element at end of allocated array for
setting to NULL.
(winpids::enumNT): Ditto.
(winpids::init): Don't modify pidlist if it hasn't been allocated
(possibly due to malloc problem).
as non-inheritable for debugging purposes in case there is a subsequent fork or
exec.
* fhandler_tty.cc (fhandler_tty_common::fixup_after_fork): Allow fork_fixup to
call ProtecHandle.
* fhandler.h: Change read and fstat to regparm/stdcall throughout.
(fhandler_base::fstat): Just declare. Don't define.
(fhandler_disk_file::fstat_helper): Declare.
* fhandler.cc (fhandler_base::fstat): Move here from fhandler.h, adapt from
former stat_dev().
(fhandler_disk_file::fstat): Move most of the disk-file-specific logic from
stat_worker to here. Use fstat_helper to derive final fstat output.
(fhandler_disk_file::fstat_helper): New method, renamed from former fstat
method.
(num_entries): Moved here from syscalls.cc.
* fhandler_mem.cc (fhandler_dev_mem::fstat): Use base class to initialize most
stuff. Invert has_physical_mem_access test for establishing permissions.
* fhandler_raw.cc (fhandler_dev_raw::fstat): Eliminate unneed test and memory
clearing. Use base class to initialize most stuff.
* syscalls.cc (stat_dev): Eliminate.
(stat_worker): Simply call fstat method to generate fstat output. Move all
device specific code to appropriate fstats.
* dir.cc (opendir): Pass correct arg to stat_worker to allow following
symlinks.
* fork.cc (vfork): Add debugging statements.
* path.cc (get_device_number): Make static. Rewrite to inspect both unix and
windows paths.
(get_raw_device_number): Just check for parts of raw device that we care about.
(get_devn): New function, pulled from get_device_number.
(win32_device_name): Accomodate arg changes to get_device_number.
(mount_info::get_device_number): Call get_device_number on translated Windows
path.
* spawn.cc (spawn_guts): Don't treat P_VFORK differently from P_NOWAIT. Add
handle to child's shared region to child so that it will be preserved if the
parent goes away.
* fhandler.h: Throughout, simplify to one open method for all fhandler classes,
requiring a path_conv first element.
* fhandler.cc (fhandler_base::open): Remove obsolete method. Generalize to
require path_conv * as first argument.
(fhandler_disk_file::open): Remove obsolete method.
(fhandler_disk_file::open): Use path_conv pointer rather than reference.
* fhandler_clipboard.cc (fhandler_dev_clipboard::dup): Use new open method.
(fhandler_dev_clipboard::open): Accomodate new argument for open methods.
* fhandler_console.cc (fhandler_console::open): Ditto.
(fhandler_console::dup): Use new open method.
(fhandler_console::fixup_after_fork): Ditto.
(fhandler_console::fixup_after_exec): Ditto.
* fhandler_dsp.cc (fhandler_dev_dsp::open): Accomodate new argument for open
methods.
* fhandler_floppy.cc (fhandler_dev_floppy::open): Ditto.
* fhandler_mem.cc (fhandler_dev_mem::open): Ditto.
* fhandler_random (fhandler_dev_random::open): Ditto.
* fhandler_raw.cc (fhandler_dev_raw::open): Ditto.
* fhandler_serial.cc (fhandler_serial::open): Ditto.
* fhandler_tape.cc (fhandler_dev_tape::open): Ditto.
* fhandler_tty.cc (fhandler_tty_slave::open): Ditto.
(fhandler_pty_master::open): Ditto.
* fhandler_windows.cc (fhandler_windows::open): Ditto.
* fhandler_zero.cc (fhandler_dev_zero::open): Ditto.
* fhandler_socket.cc (fhandler_socket::set_connect_secret): Accomodate new
argument for open methods.
* syscalls.cc (_open): Ditto.
(stat_worker): Ditto.
operators to simplify testing for directory and attributes, throughout.
* path.h (path_conv::exists): New method.
(path_conv::has_attribute): Ditto.
(path_conv::isdir): Ditto.
(path_conv::DWORD &): New operator.
(path_conv::int &): Ditto.
* dir.cc (rmdir): Eliminate a goto.
* dtable.cc (dtable::build_fhandler): Accept opt and suffix info for
path_conv.check. Return fh == NULL on path_conv error. Pass unit to set_name
as appropriate.
(dtable::reset_unix_path_name): New method.
* dtable.h (dtable): Declare new method. Reflect arg changes to
build_fhandler.
* fhandler.cc (fhandler_disk_dummy_name): Eliminate.
(fhandler_base::set_name): Expect paths to be NULL. Build unix_path_name from
win32_path_name when it is a device.
(fhandler_base::reset_unix_path_name): New method.
(fhandler_base::raw_read): Report EISDIR when ERROR_INVALID_FUNCTION or
ERROR_INVALID_PARAMETER and reading a directory.
(fhandler_disk_file::fstat): Don't call stat_dev since we should now never be
calling fhandler_disk_file methods with devices.
(fhandler_base::fhandler_base): Clear {unix,win32}_path_name.
(fhandler_base::~fhandler_base): Always free {unix,win32}_path_name.
(fhandler_disk_file::fhandler_disk_file): Remove set_no_free_names kludge.
(fhandler_disk_file::open): Ditto.
* fhandler.h (fhandler_base::no_free_names): Eliminate.
(fhandler_base::set_no_free_names): Ditto.
* fhandler_tty.cc (fhandler_tty_slave::fhandler_tty_slave): Don't set
unix_path_name here.
* path.cc (fchdir): Lock fd table throughout. Use new
dtable::reset_unix_path_name method to reset path.
* syscalls.cc (stat_worker): Reorganize to always call fstat method. Pass
path_conv method to fhandler_*::open.
(chroot): Elminate a goto.
If available, use this to calculate path name and device number.
* dtable.h (dtable): Reflect above change.
* fhandler.h (fhandler_base): Declare virtual method which accepts path_conv
rather than path string as first argument.
* fhandler.cc (fhandler_base::open): Define above new method.
* syscalls.cc (_open): Set aside a path_conv variable for use in build_fhandler
and subsequent call to open.
interrupted.
* fhandler.cc: Move pipe methods to pipe.cc.
* fhandler.h (fhandler_pipe): Add new methods.
* fork.cc (sync_with_parent): Make error messages more informative.
* pipe.cc (fhandler_pipe::fhandler_pipe): Move here from fhandler.cc.
(fhandler_pipe::lseek): Ditto.
(fhandler_pipe::set_close_on_exec): New method.
(fhandler_pipe::read): Ditto.
(fhandler_pipe::close): Ditto.
(fhandler_pipe::dup): Ditto.
(make_pipe): Create the guard mutex on the read side of the pipe.
* select.cc (peek_pipe): Use guard_mutex to discover if we have the right to
read on this pipe.
(fhandler_pipe::readh_for_read): Pass the read pipe guard mutex to peek_pipe.
* syscalls.cc (_read): Always detect signal catchers, for now.
* debug.cc (makethread): Eliminate hack to make thread inheritable.
* sigproc.cc (subproc_init): Don't use hack to make thread inheritable.
use SetHandleInformation() to set inheritance.
* wincap.cc: Set flag has_set_handle_information_on_console_handles
appropriately.
* wincap.h: Add flag has_set_handle_information_on_console_handles.
(setclexec_pid): New function for marking saved handle as close-on-exec.
(delete_handle): New function.
(debug_fixup_after_fork): New function.
* debug.h: Declare new functions, remove obsolete ones.
* fork.cc (debug_fixup_after_fork): Call to cleanup close-on-exec handles.
* fhandler.cc (fhandler_disk_file::close): Minor reorg.
(fhandler_base::set_inheritance): Set flag appropriately for debugging when
close-on-exec so forked process can delete closed handles.
* tty.h (open_output_mutex): Eliminate unneeded argument.
(open_input_mutex): Ditto.
* fhandler_tty.cc (fhandler_tty_slave::open): reflect open_*_mutex argument
changes.
* fhandler.h (fhandler_socket): Make saw_shutdown_* functions type bool.
* tty.cc (tty::get_event): Eliminate unneeded argument.
(tty::common_init): Reflect change to get_event. Events should always be
inherited.
* fhandler.h: Move definitions of O_NOSYMLINK, O_DIROPEN and
OLD_O_NDELAY from winsup.h to here. Add O_NONBLOCK_MASK define.
* fhandler_socket.cc (fhandler_socket::close): Add hack to allow
a graceful shutdown even if shutdown() hasn't been called by the
application. Add debug output.
(fhandler_socket::ioctl): Set fhandler's NONBLOCK flag according
to FIONBIO setting.
(fhandler_socket::fcntl): Use new O_NONBLOCK_MASK define. Actually
set `request' before using it.
* fhandler_tty.cc: Use new O_NONBLOCK_MASK define throughout.
(fhandler_tty_slave::ioctl): Set fhandler's NONBLOCK flag according
to FIONBIO setting.
(fhandler_pty_master::ioctl): Ditto.
* net.cc (wsock_event::prepare): Compare WSACreateEvent return code
with `WSA_INVALID_EVENT' according to MSDN.
* syscalls.cc (_read): Use new O_NONBLOCK_MASK define.
* fhandler.cc (fhandler_base::fcntl): Only set specific O_NDELAY style flag
passed in from application.
* fhandler_socket.cc (fhandler_socket::fcntl): Ditto.
* fhandler.h: Set constant for future use.
* winsup.h: Define OLD_O_NDELAY only for old programs.
* include/cygwin/version.h: Define CYGWIN_VERSION_CHECK_FOR_OLD_O_NONBLOCK.
* dcrt0.cc (set_os_type): Set 'iswinnt' appropriately.
* cygheap.cc (init_cheap): Revert to using VirtualAlloc for allocating cygheap.
(cygheap_setup_for_child_cleanup): New function. Standard function to call
after calling CreateProcess to cleanup cygheap info passed to child.
(cygheap_fixup_in_child): Copy cygheap from shared memory into allocated space
under Windows 9x or if can't relocate shared space under NT.
* cygheap.h: Declare new function.
* spawn.cc (spawn_guts): Use cygheap_fixup_in_child.
* fork.cc (fork_parent): Ditto.
* winsup.h: Declare iswinnt.
fhandler.h.
* fhandler.h (fhandler_base::get_inheritance): New method.
* fhandler_socket.cc (fhandler_socket::create_secret_event): Use proper
close-on-exec inheritance when creating.
(fhandler_socket::check_peer_secret_event): Create handle as non-inheritable.
* dtable.cc (dtable::dup_worker): Add debugging output.
(dtable::vfork_child_dup): Correctly set close_on_exec.
* fhandler.cc (fhandler_base::fork_fixup): Don't mess with handle if there is
no need to get it from the parent.
* fhandler_tty.cc (fhandler_tty_common::close): Add debugging output.
being read for executable test since we could be checking for less than that.
* syscalls.cc (stat_worker): Try opening the file the "correct" way first so
that #! processing can potentially happen. If that fails, then use "query
open" method.
* spawn.cc (spawn_guts): Delay processing of signal until after we've notified
parent about reparenting.
to 0, when requested.
* fhandler.h: New status flag FH_QUERYOPEN.
(fhandler::get_query_open): New function.
(fhandler::set_query_open): Ditto.
* syscalls.cc (stat_worker): Request query-only open mode.
doesn't deal well with "negative" chars.
* fhandler.cc (fhandler_disk_file::open): Propagate remote status of file
garnered from path_conv. Move #! checking to fstat.
(fhandler_disk_file::fstat): Reorganize st_mode setting to eliminate
duplication. Move check for #! here from fhandler::open.
* fhandler.h (fhandler_base::isremote): New method.
(fhandler_base::set_isremote): Ditto.
(fhandler_base::set_execable_p): Also record "don't care if executable state".
(fhandler_base::dont_care_if_execable): New method.
* path.cc (path_conv::check): Clear new flags. Appropriately set vol_flags,
drive_type, and is_remote_drive.
* path.h: Add new flags and methods for manipulating them.
* syscalls.cc (_unlink): Use isremote() to determine if a path is remote rather
than calling GetDriveType.
(stat_worker): Ditto.
* security.cc (get_file_attribute): Or attribute with result of NTReadEA to be
consistent with get_nt_attribute.
* fhandler.h (fhandler_base::set_open_status): New method. Stores original
open status.
(fhandler_base::get_open_status): New method. Retrieves original open status.
(fhandler_base::reset_to_open_binmode): New method.
* fhandler.cc (fhandler_base::open): Save open status.
(fhandler_base::init): Ditto.
* fhandler_clipboard.cc (fhandler_clipboard::open): Ditto.
* fhandler_console.cc (fhandler_console::open): Ditto.
* fhandler_dsp.cc (fhandler_dsp::open): Ditto.
* fhandler_dev_mem.cc (fhandler_dev_mem::open): Ditto.
* fhandler_dev_random.cc (fhandler_dev_random::open): Ditto.
* fhandler_serial.cc (fhandler_serial::open): Ditto.
* fhandler_tty_slave.cc (fhandler_tty_slave::open): Ditto.
* fhandler_tty_master.cc (fhandler_tty_master::open): Ditto.
* fhandler_dev_zero.cc (fhandler_dev_zero::open): Ditto.
* syscalls.cc (setmode): Rework so that 0 mode value causes reversion to open
state.
* fhandler_tty_slave.cc (fhandler_tty_slave::read): Use correct multiplier when
converting from deciseconds to milliseconds.
(fork_parent): Call the __pthread_atforkparent function.
* cygwin.din: Export pthread_atfork.
* thread.h (callback): New class.
(MTinterface): Use it.
* thread.cc (__pthread_atforkprepare): New function.
(__pthread_atforkparent): New function.
(__pthread_atforkchild): New function.
(__pthread_atfork): New function.
* pthread.cc (pthread_atfork): New function.
* environ.cc: Add extern declaration for `pcheck_case'.
(check_case_init): New function.
(struct parse_thing): Add "check_case" option.
* errno.cc (_sys_nerrlist): Add text for ECASECLASH.
(strerror): Add case branch for ECASECLASH.
* fhandler.cc (fhandler_disk_file::open): Check for case clash.
* path.cc: Add global variable `pcheck_case'.
(struct symlink_info): Add member `case_clash' and method `case_check'.
(path_prefix_p_): Call `pathnmatch' instead of `strncasematch'.
(pathnmatch): New funtion.
(pathmatch): Ditto.
(path_conv::check): Add handling for case checking.
(symlink): Check for case clash.
(symlink_info::check): Add parameter for case checking.
Handle case checking.
(symlink_info::case_check): New method.
(chdir): Don't use unconverted path if pcheck_case==PCHECK_STRICT.
* path.h: Add extern declarations for `pathmatch' and
`pathnmatch'.
(enum case_checking): New enumeration type describing
the case checking behaviour of path conversion routines.
(class path_conv): Add member `case_clash'.
* syscalls.cc (_link): Check for case clash.
chrisiasci@aol.com).
* cygwin.din: Add a new, internally used export - _check_for_executable.
* dcrt0.cc (dll_crt0_1): Set _check_for_executable for older binaries. Pass
user_data to premain functions.
* fhandler.cc (fhandler_disk_file::open): Only check for executable if the
linked program is intereested in the executable bit.
(fhandler_disk_file::check_execable_p): Delete.
* fhandler.h (executable_states): New enumeration of various states of
executable bit caring.
(fhandler_base::set_execable_p): New method.
* fhandler_termios.cc (fhandler_termios::line_edit): Flag when a signal has
been sent to the tty. Return -1 when this is so.
* fhandler_console.cc (fhandler_console::read): Return -1 when signal sending
character encountered.
* path.cc (path_conv::check): Record when path refers to a disk device. Move
executable extension check here.
(check_sysfile): Accomodate new EXEC path states.
(has_suffix): Remove.
(next_suffix): Remove.
(class suffix_scan): New clas.
(suffix_scan::has): New method.
(suffix_scan:next): New method.
(symlink_info::check): Use suffix_scan method to control for scanning for
suffixes.
* path.h (path_conv::exec_state): New method.
* perprocess.h: Make "C" friendly.
* include/cygwin/version.h: Define CYGWIN_VERSION_CHECK_FOR_S_IEXEC. Bump
CYGWIN_VERSION_API_MINOR.
* include/sys/cygwin.h: Change premain declarations.
* winsup.h: Move __cplusplus test to after builtin defines.
* autoload.cc: Add LoadDLLinitfunc for ole32.dll.
Add LoadDLLfuncEx statements for CoInitialize@4, CoUninitialize@0
and CoCreateInstance@20.
* dir.cc (dir_suffixes): New datastructure.
(readdir): Check for R/O *.lnk files to hide the suffix.
(opendir): Use `dir_suffixes' in path conversion.
(rmdir): Ditto.
* fhandler.cc (fhandler_disk_file::fstat): Add S_IFLNK flag
before calling `get_file_attribute'. Take FILE_ATTRIBUTE_READONLY
into account only if the file is no symlink.
* path.cc (inner_suffixes): New datastructure.
(SYMLINKATTR): Eliminated.
(path_conv::check): Use `inner_suffixes' on inner path components.
(shortcut_header): New global static variable.
(shortcut_initalized): Ditto.
(create_shortcut_header): New function.
(cmp_shortcut_header): Ditto.
(symlink): Create symlinks by creating windows shortcuts. Preserve
the old code.
(symlink_info::check_shortcut): New method.
(symlink_info::check_sysfile): Ditto.
(symlink_info::check): Check for shortcuts. Move code reading
old system attribute symlinks into symlink_info::check_sysfile().
(chdir): Use `dir_suffixes' in path conversion.
* security.cc (get_file_attribute): Check for S_IFLNK flag.
Force 0777 permissions then.
* spawn.cc (std_suffixes): Add ".lnk" suffix.
* syscalls.cc (_unlink): Use `inner_suffixes' in path conversion.
Check for shortcut symlinks to eliminate R/O attribute before
calling DeleteFile().
(stat_suffixes): Add ".lnk" suffix.
(stat_worker): Force 0777 permissions if file is a symlink.
when opening raw disk devices.
* fhandler_floppy.cc (fhandler_dev_floppy::lseek): Implement bytewise
access.
* fhandler_raw.cc (fhandler_dev_raw::open): Always open raw disk device
binary.
(fhandler_dev_raw::raw_write): Don't drop read buffer content when
writing after read.
`smbntsec'.
* path.cc (path_conv::check): Check path for being a remote path.
If so and `allow_smbntsec' is set to FALSE, set has_acls to FALSE.
* security.cc: Add global definition for `allow_smbntsec'.
* security.h: Add extern declaration for `allow_smbntsec'.
* fhandler.cc (fhandler_disk_file::open): Eliminate extern declaration
of `allow_ntsec'.
* syscalls.cc: Ditto.
condition.
* path.cc (path_conv::check): Get file system type in call to
GetVolumeInformation to check for file systems with buggy CreateFile.
* path.h (enum path_types): Add PATH_HASBUGGYOPEN.
(class path_conv): Add methods `has_buggy_open' and
`set_has_buggy_open'.
(fhandler_base::raw_read): Detect special case where last error ==
ERROR_NOACCESS but the file is at EOF. Most UNIXes do not consider this to be
an error.
execed process to avoid a race.
* sigproc.cc (wait_subproc): Print more info when a WFSO error occurs.
* automode.c: New file.
* syscalls.cc (close_all_files): Streamline slightly.
* cygheap.cc (ccalloc): Clear *entire* allocated array.
* dcrt0.cc (dll_crt0_1): Call signal_fixup_after_exec where appropriate. Set
myself->uid from parent version. Just use ThreadItem Init method. Close or
store hexec_proc as appropriate.
(_dll_crt0): Store user_data->forkee here so that proper tests can be made
subsequently.
(do_exit): Remove hExeced stuff.
* environ.cc (environ_init): Accept environ count as well as environ pointer.
* environ.h: Reflect above change.
* pinfo.cc (pinfo_init): Ditto. Accept environ count.
(fixup_in_spawned_child): Remove.
* spawn.cc (spawn_guts): Move signal code to dll_crt0_1. Don't suspend execing
process since it is no longer necessary. Store envc.
* exceptions.cc (signal_fixup_after_exec): New function.
(call_handler): Remove hExeced test.
* child_info.h (cygheap_exec_info): Store envc as well as envp.
(child_info_spawn): Store hexec_proc so that it can be closed in child.
* path.cc (normalize_posix_path): Avoid intermediate use of temporary cwd buf.
(normalize_win32_path): Ditto.
(cwdstuff::get_initial): Always set lock.
* sigproc.h: Remove hExeced.
* strace.cc (strace::vsprntf): Modify to accomodate for lack of hExeced.
* thread.cc (MTinterface::Init): Merge Init1 and ClearReent into this method.
(MTinterface::Init1): Eliminate.
(MTinterface::ClearReent): Eliminate.
* thread.h: Reflect above changes.
* include/sys/strace.h (strace): Make microseconds() public. Make various
functions 'regparm', throughout.
* pinfo.h (_pinfo): Inline simple signal manipulation functions. Requires
inclusion of thread.h which was removed from .cc files, where appropriate.
throughout.
* pinfo.cc: Eliminate signal manipulation functions.
(_pinfo::exit): Calculate total rusage for exiting process here.
* cygheap.cc (size2bucket): Eliminate.
(init_buckets): Ditto.
(_cmalloc): Calculate size and bits in a loop rather than going through a
function call.
(_crealloc): Use stored array index to calculate allocated size.
* spawn.cc (spawn_guts): Use _pinfo exit method to exit, calculating cpu usage.
* fhandler.cc (fhandler_base::fstat): Move to inline method in fhandler.h.
(fhandler_base::set_io_handle): Ditto.
* fhandler.h (fhandler_base): Make some methods inline.
* fhandler_console.cc (fhandler_console::write_normal): Make buffer larger.
* sigproc.h (sigframe::sigframe): Actually use set ebp parameter correctly.
* spawn.cc (spawn_guts): Set dwProcessId when exec'ing. Just exit immediately
after reparenting.
* syscalls.cc: Sprinkle sigframe stuff throughout.
* wait.cc (wait4): Set signal frame here.
* dcrt0.cc (__api_fatal): Don't rely on small_printf to display errors. Always
display problems to the console, if possible.
* fhandler.cc (fhandler_base::open): Ditto.
* fhandler.cc (fhandler_base::fhandler_base): Ditto.
(fhandler_base::read): Ditto. Add more debugging output. Don't issue a \r
when \r\n detected.
* pipe.cc (make_pipe): Streamline slightly. Make debug output more
interesting.
* strace.cc (strace::vsprintf): Use __progname where appropriate to distinguish
strace output when exec'ing.
throughout.
* shared.h: Remove.
* cygwin_version.h: New file.
* delqueue.h: New file.
* environ.h: New file.
* host_dependent.h: New file.
* perprocess.h: New file.
* registry.h: New file.
* security.h: New file.
Include sys/termios.h for files which need it.
* tty.h: New file.
* shared_info.h: New file.
* fhandler.h: Move inline methods that rely on tty stuff to
fhandler_console.cc.
* fhandler_tty.cc (fhandler_pty_master::process_slave_output): Set
output_done_event immediately after reading data to speed up tty output
processing.
(process_output): Set write_error to errno or zero.
(fhandler_tty_slave::write): Check previous write error prior to writing to
slave end of pipe. This allows tty output to be slightly less synchronous.
* fhandler_console.cc (fhandler_console::tcsetpgrp): Moved here from
fhandler.h.
(fhandler_console::set_input_state): Ditto.
* child_info.h: Add specific exec class.
* cygheap.h: New file. Contains declarations for cygwin heap.
* cygheap.cc: New file. Implements cygwin heap functions.
* dcrt0.cc (quoted): Simplify due to new method for passing arguments between
cygwin programs.
(alloc_stack_hard_way): Attempt to handle overlapped stack.
(dll_crt0_1): Move child_info processing here. Accomodate new method for
passing arguments between cygwin programs. Initialize cygwin heap. Establish
__argc and __argv variables.
(_dll_crt0): Move most of child_info processing to dll_crt0_1.
(cygwin_dll_init): Remove duplication.
* dtable.cc (dtable::extend): Allocate dtable using cygwin heap.
(dtable::build_fhandler): Ditto for fhandler type being constructed.
(dtable::dup_worker): Free new fhandler from cygwin heap on error.
(dtable::select_*): Don't assume that this == fdtab.
(dtable::linearize_fd_array): Delete.
(dtable::delinearize_fd_array): Delete.
(dtable::fixup_after_exec): New file.
(dtable::vfork_child_dup): Use cygwin heap.
(dtable::vfork_parent_restore): Ditto.
* dtable.h: Remove obsolete methods. Add new method.
* environ.cc (posify): Eliminate already_posix parameter and logic.
(envsize): New function.
(_addenv): Use envsize.
(environ_init): Accept an argument pointing to an existing environment list.
If supplied, allocate space for this in the the program's heap.
* fhandler.cc (fhandler_base::operator =): Move here from fhandler.h. Use
cygwin heap to allocate filenames.
(fhandler_base::set_name): Allocate/free names from cygwin heap.
(fhandler_base::linearize): Delete.
(fhandler_base::de_linearize): Delete.
(fhandler_base::operator delete): Free from cygwin heap.
(fhandler_base::~fhandler_base): Ditto.
* fhandler.h: Accomodate elimination of *linearize and other changes above.
* fhandler_console.cc (fhandler_console::fixup_after_exec): Rename from
de_linearize.
* heap.h: New file.
* fhandler_tty.cc (fhandler_tty_slave::fhandler_tty_slave): Use cygwin heap for
name. fhandler_tty::fixup_after_exec): Rename from de_linearize.
* fork.cc (fork): Call cygheap_fixup_in_child.
* heap.cc: Use declarations in heap.h.
* malloc.cc: Sprinkle assertions throughout to catch attempts to free/realloc
something from the cygwin heap.
* path.cc: Throughout, eliminate use of per-thread cache for cwd. Use cwd_*
functions rather than cwd_* variables to access cwd_win32 and cwd_posix.
(cwd_win32): New function.
(cwd_posix): New function.
(cwd_hash): New function.
(cwd_fixup_after_exec): New function.
* path.h: Accomodate path.cc changes.
* pinfo.cc (pinfo_init): Accept a pointer to an environment table. Pass this
to environ_init. Eliminate old 'title' tests.
* pinfo.h: Accomodate above change in argument.
* spawn.cc (struct av): New method for building argv list.
(av::unshift): New method.
(spawn_guts): Allocate everything that the child process needs in the cygwin
heap and pass a pointer to this to the child. Build argv list using new
method. Eliminate delinearize stuff.
* thread.h: Eliminate _cwd_win32 and _cwd_posix buffers.
* winsup.h: Eliminate obsolete functions. Add envsize() declaration.
(regopt): Use correct path to find LOCAL_MACHINE registry options.
* fhandler.cc (fhandler_base::open): Set binary mode only when binmode ==
O_BINARY.
* pipe.cc (pipe): Pipe handling should rely on binmode not _fmode now that the
two are different.
required.
* errno.cc: Use DWORD to hold Windows errors.
(geterrno_from_win_error): New function.
(seterrno_from_win_error): Use geterrno_from_win_error to convert supplied
windows error (suggested by Corinna Vinschen).
* path.cc (symlink_info): Add error element.
* path.cc (path_conv::check): Remove errno setting. Use new symlink_info errno
element to set path_conv error, where appropriate.
(symlink_info::check): Set error element rather than attempting to manipulate
errno. Add more checks for trailing / and /.. even though they are currently
useless. Avoid setting EINVAL.
* path.cc (normalize_posix_path): Correct check for trailing /.
* *.cc: put winsup.h before other headers (for __INSIDE_CYGWIN__);
use cur_environ() instead of just environ
* times.cc: remove import protections
* glob.c: add winsup.h
* localtime.c: ditto
* smallprint.c: ditto
* Makefile.in: don't __INSIDE_CYGWIN__ as it messes up profiling.
for second argument.
* path.h: Generalize SYMLINK_* constants to PC_*.
(path_conv): Create a new method. Fold third argument into second.
* dll_init.cc (dll_list::alloc): Try harder to find space to allocate dll
struct.
(dll_dllcrt0): Don't check sanity if we've already called dll_crt0.
* path.cc (path_conv::check): Don't check for a null or empty path unless
specifically told with a flag setting.
(check_null_empty_path): New function, adapted from macro.
* syscalls.cc (_rename): Use already-determined file attributes rather than
checking again.
* lib/cygwin/cygwin_attach.dll.c (cygwin_attach_dll): Use a static per_process
structure since this is apparently supposed to be zeroed.
* lib/cygwin_crt0.c (cygwin_crt0): Zero per_process structure sent to older
DLLs.
an fd.
* external.cc (cygwin_internal): Add handling of perfile_table setting.
* fhandler.cc (perfile_table): New global.
(fhandler_base::get_default_fmode): New method to return a file's default mode
based on its name.
(fhandler_base::open): Use get_default_mode method to determine a file's mode.
Record file mode in file flags.
* fhandler.h (fhandler_base): Declare get_default_fmode
* syscalls.cc (getmode): New function.
* sys/cygwin.h (__cygwin_perfile): New structure.
(cygwin_getinfo_types): Move outside of WINVER conditional.
(per_process): Move inside of WINVER conditional.
appropriate.
(LIBCOS): Find additional stub library stuff in their own subdirectory.
* dcrt0.cc: Convert user_data pointer to static __cygwin_user_data area.
(do_global_ctors): Check magic_bisquit for initialization.
(dll_crt0_1): First group of premain functions prior to fd initialization. Run
second group before calling main.
(dll_crt0 ()): New function, called from new initialization code.
(dll_crt0 (per_process *uptr)): Call new dll_crt0 () function on
initialization.
* debug.cc (thread_stub): Initialize bottom of stack with per-thread info.
* environ.cc (parse_thing): Use binmode global to control CYGWIN=binmode
behavior.
* fhandler.cc (fhandler_base::open): Allow explicit setting of __fmode to
O_BINARY or O_TEXT to override disk mount settings.
* libcmain.cc: Move to lib subdirectory.
* libccrt0.cc: Ditto.
* dll_main.cc: Ditto.
* dll_entry.cc: Ditto.
* getopt.c: Ditto.
* thread.cc (thread_init_wrapper): Call ExitThread explicitly rather than
returning, as a preliminary step towards placing per thread info at the bottom
of the stack.
* winsup.h: Move per_process class to include/sys/cygwin.h. Declare new
dll_crt0().
* include/cygwin/version.h: Bump API minor version.
* binmode.c: New file.
* textmode.c: Ditto.
* lib/_cygwin_crt0_common.cc: Ditto.
* lib/crt0.h: Ditto.
* lib/cygwin_attach_dll.c: Ditto.
* lib/cygwin_crt0.c: Ditto.
* lib/dll_entry.cc: Ditto.
* lib/dll_main.cc: Ditto.
* lib/getopt.c: Ditto.
* lib/libcmain.c: Ditto.
* lib/premain0.c: Ditto.
* lib/premain1.c: Ditto.
* lib/premain2.c: Ditto.
* lib/premain3.c: Ditto.
when determining exec flag.
* path.cc (symlink_info::check): Remove call to get_file_attribute().
* security.cc (read_sd): Rename, ditto for variables to conform
to common naming convention. Use GetFileSecurity() instead of
BackupRead() to avoid permission problems when reading ACLs.
(write_sd): Same renaming as for read_sd().
(alloc_sd): Change default permissions according to Linux permissions
for group and world when write permission is set.
* syscalls.cc (stat_worker): Avoid different permission problems
when requesting file informations.
(fhandler_base::set_inheritance): Make this a method so that we can use the
appropriate close methods.
* fhandler.cc (fhandler_base::set_inheritance): Ditto.
* path.cc (normalize_posix_path): Eliminate /. trailing path component.
(get_nt_attribute): Returns uid and gid additionally. Removed call
to set_process_privileges().
(get_file_attribute): Returns uid and gid additionally. Don't
call ntea if ntsec is ON.
(set_nt_attribute): Removed call to set_process_privileges().
Don't call ntea if ntsec is ON.
(acl): Removed call to set_process_privileges().
* dcrt0.cc (dll_crt0_1): Calls set_process_privileges() now.
* winsup.h: New prototype for set_process_privileges(),
changed prototype for get_file_attribute().
* fhandler.cc (get_file_owner): Discarded.
(get_file_group): Ditto.
(fhandler_disk_file::fstat): Discard calls to get_file_owner() and
get_file_group().
* path.cc (path_conv::path_conv): Added debugging output for result
of GetVolumeInformation().
(mount_info::conv_to_win32_path): Call backslashify() with pathbuf
instead of src_path.
* syscalls.cc (chown): Reformatted.
(chmod): Replace get_file_owner() and get_file_group() calls
by a call to get_file_attribute(). Discard local variable has_acls.
Slightly reformatted.
(stat_worker): Replaced idiot's (it's me) root dir check by call
to rootdir(). Don't call num_entries() on remote drives.
Discard local variable has_acls.
* debug.cc (threadname_init): Pass name of lock as arg 2 of new_muto.
* malloc.cc (malloc_init): Ditto.
* sigproc.cc (sigproc_init): Ditto.
* exceptions.cc (events_init): Ditto.
(call_handler): Eliminate special case for hExeced. Report locked thread in
debugging output.
* fhandler.cc (fhandker_pipe::fhandler_pipe): Propagate device type to base
class.
* fhandler.h (fhandler_pipe): Ditto.
* hinfo.cc (hinfo::build_fhandler): Pass specific type of pipe to constructor.
* spawn.cc (spawn_guts): Eliminate dependency on signal when waiting for
subprocess.
* strace.cc: Remove obsolete #ifdef.
* sync.cc (muto::muto): Save the name of the muto.
(muto:~muto): Also release the muto.
* sync.h: Add a muto name field.
* select.cc (peek_pipe): Avoid doing a PeekNamedPipe on the write end of a
pipe.
* fhandler.h: Declare new function. Add extra argument to
process_slave_output.
* fhandler_console.cc (fhandler_console::read): Move read ahead code to new
function.
* fhandler_tty.cc (fhandler_pty_master::process_slave_output): Move common code
here.
(fhandler_tty_slave::read): Understand readahead.
(fhandler_pty_master::read): Move code to process_slave_output.
* select.cc (peek_pipe): Avoid performing certain checks when non-read and on
inappropriate fh types.
(call_handler): Allow signals to be sent even if signalled thread is stopped.
Change order of signal_arrived arming/waiting threads clearing to eliminate a
race.
(reset_signal_arrived): New helper function.
* malloc.cc (malloc_init): Use mutos so that signal handler can keep track of
who owns the lock.
(__malloc_lock): Ditto.
(__malloc_unlock): Ditto.
* sync.h (new_muto): Actually use a muto for the "buffer".
* Makefile.in: Fix a dependency.
Christopher Faylor
Corinna Vinschen
Egor Duda
DJ Delorie