* sigproc.cc (wait_sig): Keep looping if there are more signals to consider and
we are flushing signals.
(sig_send): Put nonsync signals in the correct bucket.
* sigproc.cc (pending_signals): Make static.
(wait_sig): Use defined values rather than integers for rc. Never scan both
todo arrays as this could cause hangs if signals arrive from two different
sources. Rename saw_pending_signals to saw_failed_interrupt. Exit loop when
signal found. Enter low-priority sleep, if necessary, after finished
signalling completion. Set pending_signals when blocked
(from Pierre Humblet).
* exceptions.cc (setup_handler): Move non-interruptible condition handling
(back) to wait_sig (as suggested by Pierre Humblet).
(set_process_mask): Don't worry about calling sig_dispatch_pending from
sigthread since it is detected in the function anyway.
(sig_handle): Eliminate thisproc arg. Don't call sig_dispatch_pending on
SIGCONT since that should happen automatically.
* sigproc.cc (sig_dispatch_pending): Eliminate justwake argument. Just return
when called from sigthread.
(wait_sig): Change some variables to bool. Change inner while to an if. Move
uninterruptible signal handling here.
(sigproc_terminate): Don't call sig_dispatch_pending. Just increment semaphore
on exit.
* speclib: Use slightly different (but still flawed) method for determining
symbols to extract from libraries.
cygerrno.h.
* include/cygwin/config.h (__DYNAMIC_REENT__): Define.
* include/cygwin/version.h: Bump API minor version.
* cygwin.din: Export __getreent
* cygerrno.h: Include errno.h. Fix places where _impure_ptr is used directly
to store the errno value.
* debug.cc (__set_errno): Ditto.
* errno.cc: Remove _RRENT_ONLY define to get errno.cc compiled.
* signal.cc: Rename _reent_clib to _REENT throughout.
* thread.h (reent_clib): Remove prototype.
* thread.cc (reent_clib): Rename reent_clib to __getreent. Return _impure_ptr
until MTinterface is initialized.
(reent_winsup): Fix a possible SEGV when _r == NULL. Return NULL instead.
* MTinterface::fixup_after_fork: Switch reent back to _impure_ptr to keep
signal handling running when fork is called from a thread other than the
mainthread.
* include/cygwin/version.h: Reflect new exports.
* syscalls.cc (_stat): Rename to stat to avoid newlib wrapper.
* syscalls.cc (_fstat): Ditto.
* fhandler_console.cc (fhandler_console::close): Correct check for current tty.
Add debugging output when console is freed.
(set_console_state_for_spawn): Add debugging output.
* fhandler_tty.cc (fhandler_tty_slave::open): Don't decrement console open flag
when vforking.
* sigproc.cc (sigproc_terminate): Fix debugging output.
* spawn.cc (handle): Eliminate second argument.
(spawn_guts): Reflect elimination of argument change to handle.
* syscalls.cc (setsid): Add debugging output when console is freed.
* syscalls.cc (rename): Revert assumption that DELETE_ON_CLOSE works on Win9x.
(fhandler_disk_file::open): Accept some filesystem specific stuff.
* sigproc.cc (wait_for_sigthread): Become slightly more thread safe.
(sig_send): Don't assume that signal thread is ready.
waiting for signals to happen.
* signal.cc (sleep): Force pending signal delivery before sleeping.
(usleep): Ditto.
(signal): Force pending signal delivery before manipulating signal stuff.
(sigprocmask): Ditto.
(kill_worker): Ditto.
(abort): Ditto.
(sigaction): Ditto.
* syscalls.cc (readv): Force pending signal delivery before I/O.
(writev): Ditto.
(open): Ditto.
* net.cc: Ditto, throughout.
* sigproc.cc (sig_dispatch_pending): Deliver any pending signals prior to
returning.
* tty.cc (tty::make_pipes): Increase pipe buffer size.
timeslice' wait.
(setup_handler): Revamp YA to attempt to deliver signal multiple times on
failure rather than punting to wait_sig.
* miscfuncs.cc (low_priority_sleep): Accept INFINITE sleep to mean "don't reset
the priority after setting it to idle". Return previous priority.
* winsup.h (SLEEP_0_STAY_LOW): Define.
(low_priority_sleep): Return an int.
* sigproc.h: Define WAIT_SIG_PRIORITY here.
* sigproc.cc: Remove WAIT_SIG_PRIORITY definition.
idle if pending signals to allow other threads to get into interruptible state.
* miscfuncs.cc (sys_mbstowcs): Save current thread in variable to avoid an OS
call.
* wait.cc (wait_sig): Reset thread priority each time through loop since the
priority may have been set down to deal with pending signals.
is supposed to be giving up time slice.
* fhandler_console.cc (fhandler_console::read): Switch button 2/3 output escape
sequences to be consistent with xterm.
* pinfo.h (SIGCOMMUNE): New signal type.
(commune_result): New structure for commune functions.
(picom): New enum for commune functions.
(_pinfo::hello_pid): New. Pid who's communicating with me.
(_pinfo::tothem): New. Handle of communicating pipe.
(_pinfo::fromthem): Ditto.
(_pinfo::commune_recv): Declare.
(_pinfo::commune_send): Declare.
(_pinfo::alive): Declare.
(_pinfo::cmdline): Declare.
(_pinfo::lock): Declare.
* pinfo.cc (set_myself): Initialize new _pinfo lock.
(_pinfo::alive): Define. Determines if process still exists.
(_pinfo::commune_recv): Define. Receive info from another cooperating process.
(_pinfo::commune_send): Define. Send info to another cooperating process.
(_pinfo::cmdline): Define. Determine command line of a given process.
* include/sys/cygwin.h (CW_CMDLINE): Define.
*sigproc.cc (talktome): Communicate with any processes who want to talk to me.
(wait_sig): Honor __SIGCOMMUNE.
* fhandler.cc (fhandler_virtual::fixup_after_exec): Declare.
* fhandler_proc.cc: Use malloc/free/realloc throughout rather than cmalloc
since buffers don't need to be propagated to subprocesses.
* fhandler_registry.cc: Ditto.
* fhandler_virtual.cc: Ditto.
(fhandler_virtual::fixup_after_exec): Define.
* fhandler_process.cc: Ditto for malloc/free/realloc.
(process_listin): Add "cmdline".
(fhandler_process::fill_filebuf): Implement PROCESS_CMDLINE.
* miscfuncs.cc (isalpha_array): New array populated with xor values for alpha
characters to switch from one case to another.
* string.h (cygwin_strcasematch): New asm implementation of case match.
* string.h (cygwin_nstrcasematch): New asm implementation of counted case
match.
* cygwin.din: Remove last vestiges (?) of newlib wrappers.
* cygthread.cc (cygthread::detach): Always wait for event or suffer an
apparently inavoidable race.
* dcrt0.cc (dll_crt0_1): Allocate threads after stack has been relocated.
* debub.cc (lock_debug): Don't acquire lock on exit.
* fork.cc (fork_child): Recreate mmaps before doing anything else since Windows
has a habit of using blocks of memory in the child that could previously have
been occupied by shared memory in the parent.
* mmap.cc (fhandler_disk_file::fixup_mmap_after_fork): Issue error here and
provide some details about what went wrong.
(fixup_mmaps_after_fork): Remove error message.
* shared.cc (open_shared): Move warning message so that more detail is
possible.
* sigproc.cc (sigproc_init): Initialize sync_proc_subproc to avoid a race.
(sigproc_terminate): Specifically wait for process thread to terminate.
before SetEvent to eliminate a race.
(cygthread::terminate): Accumulate list of threads to check for termination and
call WaitForMultipleObjects on list rather than waiting for each thread
individually.
* sigproc.cc (subproc_init): Zap hwait_subproc thread handle since it is no
longer used.
* spawn.cc (spawn_guts): Fix so that cygthread::terminate is *really* called
only for exec.
* dcrt0.cc (do_exit): Move thread stuff after vfork stuff or threads are
terminated during vfork.
* sigproc.cc (proc_terminate): Grab proc lock prior to signalling subproc
thread exit to avoid an extra "wait-for-thread-to-exit".
Assume that they exit via an ExitThread call.
* cygthread.h (cygthread::SetThreadPriority): New function.
(cygthread::zap_h): New function.
* dcrt0.cc (do_exit): Move cygthread::terminate earlier and establish
exit_state guard.
* fhandler.h (fhandler_tty_master::output_thread): Delete.
* fhandler_tty.cc (fhandler_tty_master::init): Set priority for threads via
method. Zap handles when done. Don't treat process_output specially.
(process_output): Call ExitThread directly.
(fhandler_tty_master::fixup_after_fork): Don't worry about output_thread.
(fhandler_tty_master::fixup_after_exec): Ditto.
* sigproc.cc (proc_terminate): Don't detach from hwait_subproc. Just let it
exit.
(sigproc_init): Close thread handle after initialization.
(wait_sig): Use GetCurrentThread() as SetThreadPriority call rather than
*event* handle. Call ExitThread directly on termination.
(wait_subproc): Call ExitThread directly on termination.
* tty.cc (tty_list::terminate): Don't attempt t detach from output_thread.
already taken care of that.
* fhandler_console.cc (fhandler_console::open): Initialize handles to NULL.
(fhandler_console::close): Ditto. GNUify non-GNU formatted functions calls
throughout.
* sigproc.h (sigCONT): Declare.
(wait_sig): Create sigCONT event here.
* exceptions.cc (sig_handle_tty_stop): Wait for sigCONT event rather than
stopping thread.
(sig_handle): Set sigCONT event as appropriate on SIGCONT rather than calling
ResumeThread.
* dcrt0.cc (dll_crt0_1): Just wait for signal thread to go live rather than
going through the overhead of invoking it.
* fork.cc (fork_child): Ditto.
* exceptions.cc (signal_fixup_after_fork): Call sigproc_init here.
* sigproc.cc (proc_can_be_signalled): Assume that the signal thread is live.
(sig_dispatch): Ditto.
(sig_send): Ditto.
(wait_for_sigthread): Renamed from "wait_for_me". Assume that wait_sig_inited
has been set and that this function is only called from the main thread.
* winsup.h (wait_for_sigthread): Declare new function.
function.
(cygthread::operator new): Add defense debugging output.
(cygthread::cygthread): Add debugging output. Set name after thread has been
awakened to avoid a race.
(cygthread::exit_thread): Use handle operator rather than using ev directly.
(cygthread::exit_thread): Reorganize to provide debugging. Set __name to NULL.
* cygthread.h (cygself): Define.
* fhandler_tty.cc (fhandler_tty_master::init): Use cygself as argument so that
invoked thread can access its own info.
(process_output): Derive cygthread info of thread from thread argument.
* sigproc.cc (sigproc_init): Use cygself as argument so that invoked thread can
access its own info.
(wait_sig): Derive cygthread info of thread from thread argument.
functionality.
* cygheap.cc (init_cheap): Move cygheap_max calculation to _csbrk.
(_csbrk): Reorganize to not assume first allocation is <= 1 page.
(cygheap_setup_for_child): Mark protected handle as inheritable.
* cygheap.h (cygheap_debug): New struct.
(init_cygheap): Add new structure when debugging.
* dcrt0.cc (dll_crt0_1): Remove call to debug_init. Close ppid_handle here, if
appropriate. Don't protect subproc_ready, since it is already protected in the
parent. Call memory_init prior to ProtectHandle to ensure that cygheap is set
up. Call debug_fixup_after_fork_exec when appropriate.
(_dll_crt0): Don't close ppid_handle here.
* debug.cc: Use cygheap debug structure rather than static elements throughout.
(add_handle): Don't issue a warning if attempt to protect handle in exactly the
same way from exactly the same place. Add pid info to warning output. Accept
additional argument controlling whether handle is to be inherited. Add pid to
stored information.
(debug_fixup_after_fork_exec): Renamed from debug_fixup_after_fork. Reorganize
to avoid erroneously skipping handles.
(mark_closed): Add pid info to warning output.
(setclexec): Rename from setclexec_pid.
* fhandler.cc (fhandler_base::get_default_fmode): Minor reorg.
(fhandler_base::fstat): Add debugging output.
(fhandler_base::set_inheritance): Call setclexec rather than setclexec_pid.
(fhandler_base::fork_fixup): Ditto.
* fhandler_console.cc (get_tty_stuff): Mark protected handle as inheritable.
* fhandler_tty.cc (fhandler_tty_slave::open): Ditto.
* tty.cc (tty::make_pipes): Ditto.
(tty::common_init): Ditto.
* fork.cc (fork_parent): Ditto.
(fork_child): Close protected handles with correct name. Remove
debug_fixup_after_fork call.
* fhandler_socket.cc (fhandler_socket::create_secret_event): Mark protected
handle as inheritable/non-inheritable, as appropriate.
* shared.cc (memory_init): Mark protected handle as inheritable. Call
debug_init here.
* sigproc.cc (wait_sig): Close protected handle with correct name.
* spawn.cc (spawn_guts): Rename spr to subproc_ready and mark it as
inheritable.
* exceptions.cc (debugger_command): Try to run dumper.exe, if found.
* syscalls.cc (fstat64): Don't follow symlinks for path_conv lookup since path
is already resolved.
muto. Use this argument to construct static storage.
* cygheap.cc (cygheap_init): Reflect above change.
* exceptions.cc (events_init): Ditto.
* malloc.cc (malloc_init): Ditto.
* path.cc (cwdstuff::init): Ditto.
* cygheap.h (cwdstuff): Change name of lock element to make it less generic.
* path.cc (cwdstuff::get_hash): Ditto.
(cwdstuff::get_initial): Ditto.
(cwdstuff::set): Ditto.
(cwdstuff::get): Ditto.
* sigproc.cc (proc_subproc): Ditto.
* debug.cc (lock_debug): Change to method. Use method rather than macro
throughout.
* tty.h (tty_min::kill_pgrp): Declare new method.
* fhandler_termios.cc (tty_min::kill_pgrp): New method.
(fhandler_termios::line_edit): Use new method for killing process.
* dcrt0.cc (do_exit): Ditto.
* dtable.cc (dtable::get_debugger_info): New method for inheriting dtable info
from a debugger.
* tty.cc (tty_init): Attempt to grab file handle info from parent debugger, if
appropriate. # dtable.cc (dtable::stdio_init): Make this a method.
(dtable::init_std_file_from_handle): Don't set fd unless it's not open.
(dtable::build_fhandler_from_name): Move name setting to
dtable::build_fhandler.
(dtable::build_fhandler): Add win32 name parameter.
* dcrt0.cc (dll_crt0_1): Change to use dtable stdio_init.
* dtable.h (dtable): Reflect build_fhandler parameter change.
* mmap.cc (mmap_record::alloc_fh): Don't set name parameter in build_fhandler.
* net.cc (fdsock): Remove set_name call since it is now handled by
build_fhandler.
* sigproc.cc (proc_subproc): Release muto as early as possible.
inheritance/permission.
* spawn.cc (spawn_guts): Ditto.
* security.cc (create_token): Initialize token so that it is not tested for
bogus value later. Use sec_user to control process/thread creation.
* security.h (__sec_user): Rename declaration from sec_user.
(sec_user_nih): Declare here as inline function wrapper for __sec_user.
(sec_user): Ditto.
* sigproc.cc (czombies): Allocate a character array for zombies to avoid
constructor overhead
(extremely hackish, I know).
(cpchildren): Ditto.
(pchildren): New define.
(zombies): Ditto.
(getsem): Use sec_user_nih to control semaphore inheritance/permission.
* uinfo.cc (uinfo_init): Use more robust method for determining if process was
invoked from a non-cygwin process.
* sync.h (muto::init): Eliminate "inheritance" parameter.
(new_muto): Reflect removal of parameter.
* sync.cc (muto::init): Ditto.
* cygheap.cc (cygheap_init): Ditto.
* debug.cc (threadname_init): Ditto.
* exceptions.cc (events_init): Ditto.
* malloc.cc (malloc_init): Ditto.
* path.cc (cwdstuff::init): Ditto.
* sigproc.cc (sigproc_init): Ditto.
* grp.cc (group_lock): Use different method for locking with static member.
(read_etc_group): REALLY ensure that read lock mutex is released.
* passwd.cc (passwd_lock): Use different method for locking with static member.
(read_etc_passwd): REALLY ensure that read lock mutex is released.
* shared.cc (sec_user): Correct reversed inheritance test.
required to allow use of some things from user loaded DLL.
(CW_STRACE_ON): Add new feature.
(CW_CYGWIN_PID_TO_WINPID): Ditto.
* pinfo.cc (set_myself): Call "strace.hello" to initiate possible strace
session.
(pinfo::init): Guard against dereferencing uninitialized myself.
* sigproc.cc (wait_sig): Call strace.hello() when __SIGTRACE "signal" received.
* strace.cc (strace::hello): New method.
* wincap.cc (wincapc::init): Avoid initializing if already initialized.
* wincap.h (wincapc::wincapc): New method.
* include/sys/cygwin.h: Add new CW_ enums. Kludge typedefs of {g,u}id_t if
required.
* strace.h (strace::hello): Declare new method.
signal came from this process or not.
* sigproc.h: Reflect sig_handle arg change.
* signal.cc (kill_pgrp): Add sigframe info.
(abort): New function. Eliminates newlib function of same name.
* sigproc.cc (wait_sig): Pass "signal from this process" value as arg 2.
* dcrt0.cc (_dll_crt0): Check for changes in child_info size.
(multiple_cygwin_problem): Avoid "proc" errors when testing. Just assume new
cygwin proc.
* shared_info.h (mount_info): Add 'cb' element for sanity checks.
(shared_info): Ditto.
* child_info.h (child_info): Add fhandler_union_size element for sanity
checking.
* shared.cc (open_shared): Detect shared region size mismatch between parent
and child.
(shared_info::initialize): Detect shared region size mismatch with expectation.
(memory_Init): Ditto.
* sigproc.cc (init_child_info): Correctly set cb in passed structure.
* shared.cc (open_shared):
Force dependencies for files which depend on autogenerated headers to ensure
that they are always built.
* child_info.h (child_info): Add new fields to accommodate new magic number
header stuff.
* dcrt0.cc: Rely on "child_info_magic.h" to ensure that correct child_info
magic numbers are used.
(dll_crt0_1): Temporarily remove _cygwin_testing_magic test.
(_dll_crt0): Do more testing on magic numbers from fork_info structure. Call
"multiple_cygwin_problem" where appropriate.
(multiple_cygwin_problem): Rename from multiple_cygwin_die. Issue a warning or
die, as appropriate based on cygwin version/magic number mismatch.
* pinfo.cc (pinfo::exit): Don't attempt to dereference `this' if it doesn't
exist. This can happen when a fatal error occurs early in process
initialization.
* shared.cc: Rely on "shared_info_magic.h" to accommodate that new magic number
header stuff.
(shared_info::initialize): Use new magic number stuff, for shared region.
(memory_init): Ditto, for mount table.
* shared_info.h: Accomodate new magic number stuff for shared region and mount
table.
* sigproc.cc: Rely on "child_info_magic.h" to accommodate new magic number
header stuff.
(init_child_info): Initialize new fields in child_info) to accomodate magic
numbers.
* winsup.h: Rename multiple_cygwin_die to multiple_cygwin_problem.
* include/cygwin/version.h: Define macros for manipulating version magic.
* cygmagic: New shell script for generating magic numbers.
inline" warnings.
* security.h (class cygsid): Ditto.
* sigproc.cc (get_proc_lock): Ditto.
* sigproc.h (class sigframe): Ditto.
* sync.h (class muto): Ditto.
* fhandler.h (fhandler_base::get_guard): Actually MAKE virtual as previously
indicated.
* pipe.cc (make_pipe): Remove extraneous set_errno.
* syscalls.cc (_open): Ditto.
* select.cc (peek_pipe): Need to check that there is still something to read
from the pipe after acquiring the mutex since another process/thread could have
eaten the input before we got to acquiring the lock. (Thanks to Nick Duffek
for this inspiration.)
* fhandler.cc (fhandler_base::close): Show both name and handle in debugging
output.
* fhandler.h (fhandler_base::get_guard): New virtual method.
(fhandler_pipe::get_guard): New method.
(fhandler_socket::ready_for_read): Delete declaration.
(fhandler_pipe::ready_for_read): Ditto.
(fhandler_serial::ready_for_read): Ditto.
(fhandler_console::ready_for_read): Ditto.
(fhandler_tty_common::ready_for_read): Ditto.
(fhandler_windows::ready_for_read): Ditto.
(struct select_record::peek): Declare new method.
* select.cc (MAKEready): Delete.
(peek_pipe): Use get_guard method to retrieve potential guard mutex handle.
(fhandler_base::ready_for_read): Rewrite as generic ready-for-read handler.
Should only be called for "slow" devices.
(fhandler_socket::ready_for_read): Delete definition.
(fhandler_pipe::ready_for_read): Ditto.
(fhandler_serial::ready_for_read): Ditto.
(fhandler_console::ready_for_read): Ditto.
(fhandler_tty_common::ready_for_read): Ditto.
(fhandler_windows::ready_for_read): Ditto.
(fhandler_pipe::select_read): Fill in new peek record in select_record
structure.
(fhandler_console::select_read): Ditto.
(fhandler_tty_common::select_read): Ditto.
(fhandler_serial::select_read): Ditto.
(fhandler_socket::select_read): Ditto.
(fhandler_socket::select_read): Ditto.
(fhandler_tty_slave::ready_for_read): Check for tty not open. Set errnos
appropriately.
* syscalls.cc (_read): Allow ready_for_read to set errno.
* pinfo.cc (pinfo::init): Return spawn/NO_WAIT process as valid if it is
initializing.
* sigproc.cc (getsem): Adjust wait for process to initialize downward to avoid
huge waits.
operators to simplify testing for directory and attributes, throughout.
* path.h (path_conv::exists): New method.
(path_conv::has_attribute): Ditto.
(path_conv::isdir): Ditto.
(path_conv::DWORD &): New operator.
(path_conv::int &): Ditto.
* dir.cc (rmdir): Eliminate a goto.
* dtable.cc (dtable::build_fhandler): Accept opt and suffix info for
path_conv.check. Return fh == NULL on path_conv error. Pass unit to set_name
as appropriate.
(dtable::reset_unix_path_name): New method.
* dtable.h (dtable): Declare new method. Reflect arg changes to
build_fhandler.
* fhandler.cc (fhandler_disk_dummy_name): Eliminate.
(fhandler_base::set_name): Expect paths to be NULL. Build unix_path_name from
win32_path_name when it is a device.
(fhandler_base::reset_unix_path_name): New method.
(fhandler_base::raw_read): Report EISDIR when ERROR_INVALID_FUNCTION or
ERROR_INVALID_PARAMETER and reading a directory.
(fhandler_disk_file::fstat): Don't call stat_dev since we should now never be
calling fhandler_disk_file methods with devices.
(fhandler_base::fhandler_base): Clear {unix,win32}_path_name.
(fhandler_base::~fhandler_base): Always free {unix,win32}_path_name.
(fhandler_disk_file::fhandler_disk_file): Remove set_no_free_names kludge.
(fhandler_disk_file::open): Ditto.
* fhandler.h (fhandler_base::no_free_names): Eliminate.
(fhandler_base::set_no_free_names): Ditto.
* fhandler_tty.cc (fhandler_tty_slave::fhandler_tty_slave): Don't set
unix_path_name here.
* path.cc (fchdir): Lock fd table throughout. Use new
dtable::reset_unix_path_name method to reset path.
* syscalls.cc (stat_worker): Reorganize to always call fstat method. Pass
path_conv method to fhandler_*::open.
(chroot): Elminate a goto.
interrupted.
* fhandler.cc: Move pipe methods to pipe.cc.
* fhandler.h (fhandler_pipe): Add new methods.
* fork.cc (sync_with_parent): Make error messages more informative.
* pipe.cc (fhandler_pipe::fhandler_pipe): Move here from fhandler.cc.
(fhandler_pipe::lseek): Ditto.
(fhandler_pipe::set_close_on_exec): New method.
(fhandler_pipe::read): Ditto.
(fhandler_pipe::close): Ditto.
(fhandler_pipe::dup): Ditto.
(make_pipe): Create the guard mutex on the read side of the pipe.
* select.cc (peek_pipe): Use guard_mutex to discover if we have the right to
read on this pipe.
(fhandler_pipe::readh_for_read): Pass the read pipe guard mutex to peek_pipe.
* syscalls.cc (_read): Always detect signal catchers, for now.
* debug.cc (makethread): Eliminate hack to make thread inheritable.
* sigproc.cc (subproc_init): Don't use hack to make thread inheritable.
queried in waitsig later.
* sigproc.cc (wait_sig): Don't deliver a signal if in a vfork.
* fork.cc (vfork): Deliver all signals on parent return from vfork.
* Makefile.in: Use linker script to control location of cygheap.
* cygheap.cc (buckets): Make static.
(init_cheap): Remove special iswinnt handling. Allocate cygheap at a fixed
location. Display more info when allocation fails.
(cygheap_fixup_in_child): Try harder to move cygheap to correct location.
Display more info when allocation fails.
* fhandler.h (fhandler_socket): Add macros for tracking socket shutdown state.
* net.cc (cygwin_shutdown): Set appropriate shutdown value for future use.
* select.cc (select_stuff::cleanup): New method.
(cygwin_select): Call cleanup explicitly to avoid a race.
(select_stuff:~select_stuff): Call cleanup chain via cleanup method.
(fhandler_socket::select_read): Set *_ready when shutdown has been called on
the socket.
(fhandler_socket::select_write): Ditto.
(fhandler_socket::select_except): Ditto.
* winsup.h: Move NO_COPY to "COMMON" section.
* autoload.cc (wsock_started): Avoid initializing NO_COPY value.
* sigproc.cc: Remove initialization from NO_COPY variables.
(sigproc_init): Initialize sig_loop_wait here, rather than via initialization.
(subproc_init): Initialize proc_loop_wait here, rather than via initialization.
fhandler.h.
* fhandler.h (fhandler_base::get_inheritance): New method.
* fhandler_socket.cc (fhandler_socket::create_secret_event): Use proper
close-on-exec inheritance when creating.
(fhandler_socket::check_peer_secret_event): Create handle as non-inheritable.
(class child_info): Add an element.
* cygheap.cc (init_cheap): Allocate cygwin heap in shared memory area.
(cygheap_fixup_in_child): Map cygwin heap, passed from parent via shared memory
into correct address.
(cygheap_setup_for_child): New function.
* cygheap.h: Declare new functions.
* dcrt0.cc (dll_crt0_1): Accomodate new cygheap_fixup_in_child arguments.
Avoid protecting subproc_ready unless it is spawn/nowait.
* fork.cc (fork_parent): Use new cygheap_setup_for_child function to setup
cygwin heap info. Close passed cygheap shared memory handle.
* spawn.cc (spawn_guts): Ditto. Also, reorganize to avoid synchronization
between parent and child in non-P_OVERLAY case.
* sigproc.cc (wait_sig): Only signal subproc_ready when execing.
(setup_handler): Move actions after a successful interrupt to interrupt_setup.
* fork.cc (vfork): Augment debugging output.
* sigproc.cc (proc_subproc): Ditto.
* spawn.cc (spawn_guts): Ditto. Correctly fill out progname when spawn
NO_WAIT. Call signal handler when a signal arrives.
* sigproc.h: Declare a function.
* pinfo.h: Correctly set __SIGOFFSET.
* path.cc (hash_path_name): Avoid calling library functions for simple copying
of characters.
* shortcut.c: Use WIN32_LEAN_AND_MEAN.
* smallprint.c: Ditto.
* environ.cc (getwinenv): Minor clarity fix.
* localtime.c: No need to include windows.h
* string.h: New file.
structure of newlib.
* sigproc.h (sig_send): Add exception parameter to sig_send.
* sigproc.cc (sig_send): Ditto. Use it when setting frame info.
* exceptions.cc (handle_exceptions): Use exception flag when calling sig_send.
[sigframe::~sigframe]: Clear exception field.
[sigframe::set]: Set exception field from caller.
* sigproc.cc (sig_send): Set exception field when frame pointer is passed in.
* exceptions.cc (interrupt_on_return): Always treat exception as interruptible.
(sigframe::~sigframe): Use unregister method.
(sigframe::call_signal_handler): Declare new method.
* exceptions.cc (sigframe::call_signal_handler): New method. Unregisters
current sigframe before calling signal handler.
(setup_handler): Clear waiting threads prior to arming signal_arrived.
* syscalls.cc (_read): Change goto to loop. Recalculate sigframe inside of
loop so that constructor is called when appropriate.
* wait.cc (wait4): Ditto.
* signal.cc: Change "sig" to "signal" in debugging messages throughout.
* sigproc.cc: Ditto.
* exceptions.cc (setup_handler): Clarify debugging message.
* sigproc.cc (proc_subproc): Remove PROC_CHILDSTOPPED test. It is handled by
normal PROC_CLEARWAIT case.
(wait_sig): Eliminate "dispatched" tracking. Remove __SIGCHILDSTOPPED test.
Decrement counter again before jumping out of InterlockedDecrement loop so that
subsequent InterlockedIncrement will keep the counter at the correctly
decremented value and also detect when there are pending signals.
* sigproc.h: Remove __SIGCHILDSTOPPED element.
(procstuff): Remove PROC_CHILDSTOPPED element.
* child_info.h (child_info): Move shared_h, console_h to cygheap. Add mount_h.
* cygheap.h (init_cygheap): Add shared_h, console_h.
* cygheap.cc (init_cheap): Initialize heap at a fixed location after the shared
memory regions. Initialize cygheap->user name here.
* dcrt0.cc (dll_crt0_1): Call getpagesize () to initialize constants. Remove
cygheap_init since it is done in shared_init now.
(_dll_crt0): Initialize mount_h, remove shared_h and console_h initialization.
* fhandler_console.cc (console_shared_h): Eliminate.
(get_tty_stuff): Use cygheap->console_h rather than console_shared_h.
* heap.cc (heap_init): Use page size constant calculated earlier in
initialization.
* shared.cc: Eliminate cygwin_shared_h. Add cygwin_mount_h.
(mount_table_init): New function for initializing a user mount table.
(open_shared_file_map): Use constant for shared memory region. Initialize
cygheap and mount table here.
(open_shared): Improve debugging output.
(shared_info::initialize): Eliminate call to mount.init.
(shared_terminate): Use cygheap->shared_h. Close cygwin_mount_h.
(open_shared_file_map): Eliminate.
* shared_info.h (mount_info): Add a version field.
(shared_align_past): New macro for calculating location for shared memory
regions.
* sigproc.cc (init_child_info): Eliminate shared_h, console_h.
* spawn.cc (spawn_guts): Pass on cygwin_mount_h iff not a different user.
* syscalls.cc (system_info): New global holding system memory defaults.
(getpagesize): Use system_info.
* uinfo.cc (internal_getlogin): Only fill in user name if nonexistent.
* winsup.h: Declare system_info.
* passwd.cc (read_etc_passwd): Use cygheap->user.name () rather than retrieving
the name again.
* exceptions.cc (sig_handle_tty_stop): Move setting of PID_STOPPED to earlier
in interrupt.
((interrupt_setup): i.e., here.
(sig_handle): Don't queue multiple SIGSTOPS.
* fhandler.h (bg_check_types): Enumerate return value of bg_check for clarity.
* signal.cc (kill_pgrp): Minor cleanup.
* fhandler_termios.cc (fhandler_termios::bg_check): Use enumerated type for
function return. Don't raise signal if a signal is already queued.
* fhandler_console.cc (fhandler_console::read): Use enumerated return type for
bg_check.
* select.cc: Ditto, throughout.
* read.cc: Ditto, throughout.
* termios.cc: Ditto, throughout.
(_read): YA interrupt detect simplification.
* wait.cc (wait4): Ditto.
* signal.cc (sigaction): Don't treat SIGCONT specially.
* exceptions.cc (interrupt_setup): Save sa_flags of interrupted signal for
later use.
(sig_handler): Default any stopping signal to SIGSTOP.
(call_signal_handler): New function.
(sigdelayed0): New function.
* sigproc.cc (sigproc_init): Initialize SIGSTOP sigaction for special behavior.
* sigproc.h: Define call_signal_handler.
* syscalls.cc (_read): Allow restartable signal behavior.
* environ.cc (codepage_init): To here.
* exceptoins.cc (SIG_NONMASKABLE): Remove SIGCONT from consideration since it
is supposed to be maskable.
* signal.cc (sigaction): Ditto.
* sigproc.cc (wait_sig): Ditto.
* winsup.h: Eliminate global declaration of codepage_init.
* exceptions.cc (interrupt_setup): Don't set signal mask here or races occur
with main thread. Set it in sigdelayed instead.
(sigreturn): Reflect change in stack order of ebp and flags.
(sigdelayed): Set stack frame correctly. Call set_process_mask here with flags
for last trapped signal.
(signal_dispatch): Add newmask.
* sigproc.cc (wait_sig): Eliminate ill-considered attempt to halt looping
signal processors.
* child_info.h (child_info): Eliminate parent_alive.
* dcrt0.cc (dll_crt0_1): Call fork_init for debugging pid creation.
* fork.cc (fork_child): Reflect change to fixup_mmaps_after_fork arguments.
(slow_pid_reuse): New function to grab last 'n' pids to prevent pid reuse.
(fork_parent): Move last_fork_proc into slow_pid_reuse. Handle fork_pids
debugging. Eliminate unnecessary call to set_child_mmap_ptr.
(fork_init): New debugging function.
* mmap.cc (fixup_mmaps_after_fork): Renamed from recreate_mmaps_after_fork.
Rely on copied data after a fork.
(set_child_mmap_ptr): Eliminate.
* pinfo.h (_pinfo): Eliminate parent_alive, mmap_ptr and reflect above changes.
* spawn.cc (spawn_guts): Eliminate vestiges of "old way" of sending new hProc
to parent process.
(cygheap_root::~cygheap_root): Ditto.
(cygheap_root::operator=): Ditto.
(cygheap_user::~cygheap_user): Ditto.
(cygheap_user::set_name): Ditto.
(cygheap_user::set_logsrv): Ditto.
(cygheap_user::set_domain): Ditto.
(cygheap_user::set_sid): Ditto.
* cygheap.h (cygheap_root): New class.
(cygheap_user): Ditto.
(init_cygheap): Change type of `root' member to cygheap_root.
Add `user' member.
* dir.cc (opendir): Use new `cygheap_root' class.
* dcrt0.cc (dll_crt0_1): Use new `cygheap_user' class.
* fork.cc (fork_parent): Ditto.
* grp.cc (getgroups): Ditto.
* passwd.cc (search_for): Ditto.
* path.cc: Use new `cygheap_root' class throughout.
* pinfo.h (_pinfo): Remove `use_psid'. Move `username', `psid',
`logsrv', `domain', `orig_{uid,gid}' and `real_{uid,gid}' to
cygheap_user class.
* security.cc: Use new `cygheap_user' class throughout.
* shared.cc (sec_user): Ditto.
* sigproc.cc (proc_subproc): Remove copy statements for user
related information moved to `cygheap_user' class.
* spawn.cc (spawn_guts): Invalidate current chroot settings
when creating Windows environment. Use new `cygheap_user' class.
* syscalls.cc: Use new `cygheap_user' class throughout.
* uinfo.cc: Ditto.
* uinfo.cc (internal_getlogin): Change parameters to reflect the
move of user information to cygheap.
heap.
* child_info.h (child_info): Change pointer type of cygheap to init_cygheap.
* cygheap.cc (init_cheap): Point cygheap_max after contents of cygheap. Move
some stuff into cygheap.h.
* dir.cc (opendir): Change to use root and rootlen in cygheap rather than in
myself.
(mkdir): Change to use umask in cygheap rather than in myself.
* path.cc: Ditto, throughout.
* syscalls.cc (_open): Ditto. Change to use umask in cygheap rather than in
myself.
(chroot): Change to allocate root dir on the cygwin heap.
(umask): Change to use umask in cygheap rather than in myself.
(cygwin_bind): Ditto.
* sigproc.cc (proc_subproc): Don't copy umask or root stuff as this happens
automatically now.
* pinfo.h (_pinfo): Migrate stuff out of here and into init_cheap.
* dcrt0.cc (dll_crt0_1): Call cygheap_init later in startup for first cygwin
process.
(dll_crt0_1): Move sigthread lock initialization to earlier in startup.
* exceptions.cc (interrupt_on_return): Remove previous kludgy attempt to detect
an invalid frame.
(call_handler): Eliminate inner for loop. Grab signal critical section lock
where appropriate.
* sigproc.cc (proc_subproc): Restore uid setting.
* sigproc.h (sigthread): Reinstitute sigthread lock as a critical section.
(sigframe): Grab the sigthread lock before clearing frame to avoid having the
signal thread use an invalid frame.
parent handle.
* dcrt0.cc (_dll_crt0): Close parent's parent handle when spawned or forked.
* debug.cc (add_handle): Correct erroneous reference to handle structure when
printing warning.
* exceptions.cc (interrupt_now): Always return 1.
(interrupt_on_return): Accept a sigthread argument. Check to see if this
argument has been trashed prior to setting up the stack return.
(call_handler): Add a loop around attempts to dispatch signals to detect case
where interrupt_on_return fails.
(_sigdelayed): Set up a temporary frame pointer prior to calling stuff that
could trigger an interrupt or the stack walking code will be very confused.
* fork.cc (fork_parent): Move a lot of the setup of the child process into
proc_subproc.
* spawn.cc (spawn_guts): Ditto. Use ppid_handle to contact logical parent when
reparenting.
* pinfo.h (_pinfo): Remember the logical handle of the parent process.
* sigproc.cc (proc_subproc): Record most stuff necessary for the _pinfo
structure that is inferrable from myself when adding children.
(wait_sig): Always set 'pending_signals' flag when about to kick off the signal
scanning loop. Reset it only if there are no pending signals.
execed process to avoid a race.
* sigproc.cc (wait_subproc): Print more info when a WFSO error occurs.
* automode.c: New file.
* syscalls.cc (close_all_files): Streamline slightly.
* cygheap.cc (ccalloc): Clear *entire* allocated array.
active.
* syscalls.cc (_read): Don't clear errno.
* sigproc.cc (wait_sig): Don't scan the waiting process list after a SIGCHLD if
there are no zombies to reap.
* winsup.h: Use __builtin_strcmp.
* environ.cc (posify): Don't initialize len unless it is required
(from DJ Delorie <dj@redhat.com>).
PROC_ADDCHILD. Return 0 when terminated child has just been reparented.
(wait_subproc): Only send SIGCHLD when proc_subproc returns != 0.
* strace.cc (strace::vsprntf): Only strip .exe extension from program name.
than once.
* fhandler_tty.cc (fhandler_tty_slave::open): Protect some handles.
(fhandler_tty_common::close): Use proper name when closing handles.
(fhandler_pty_master::close): Don't close to_slave or from_slave since they've
already been closed earlier in the function.
* sigproc.cc (proc_subproc): Don't protect vchild->hProcess. Expect that the
caller will do this, instead.
* tty.cc (tty_list::terminate): Use proper name when closing handles.
(tty::make_pipes): Protect some handles.
* dcrt0.cc (dll_crt0_1): Call signal_fixup_after_exec where appropriate. Set
myself->uid from parent version. Just use ThreadItem Init method. Close or
store hexec_proc as appropriate.
(_dll_crt0): Store user_data->forkee here so that proper tests can be made
subsequently.
(do_exit): Remove hExeced stuff.
* environ.cc (environ_init): Accept environ count as well as environ pointer.
* environ.h: Reflect above change.
* pinfo.cc (pinfo_init): Ditto. Accept environ count.
(fixup_in_spawned_child): Remove.
* spawn.cc (spawn_guts): Move signal code to dll_crt0_1. Don't suspend execing
process since it is no longer necessary. Store envc.
* exceptions.cc (signal_fixup_after_exec): New function.
(call_handler): Remove hExeced test.
* child_info.h (cygheap_exec_info): Store envc as well as envp.
(child_info_spawn): Store hexec_proc so that it can be closed in child.
* path.cc (normalize_posix_path): Avoid intermediate use of temporary cwd buf.
(normalize_win32_path): Ditto.
(cwdstuff::get_initial): Always set lock.
* sigproc.h: Remove hExeced.
* strace.cc (strace::vsprntf): Modify to accomodate for lack of hExeced.
* thread.cc (MTinterface::Init): Merge Init1 and ClearReent into this method.
(MTinterface::Init1): Eliminate.
(MTinterface::ClearReent): Eliminate.
* thread.h: Reflect above changes.
* include/sys/strace.h (strace): Make microseconds() public. Make various
functions 'regparm', throughout.
* pinfo.h (_pinfo): Inline simple signal manipulation functions. Requires
inclusion of thread.h which was removed from .cc files, where appropriate.
throughout.
* pinfo.cc: Eliminate signal manipulation functions.
(_pinfo::exit): Calculate total rusage for exiting process here.
* cygheap.cc (size2bucket): Eliminate.
(init_buckets): Ditto.
(_cmalloc): Calculate size and bits in a loop rather than going through a
function call.
(_crealloc): Use stored array index to calculate allocated size.
* spawn.cc (spawn_guts): Use _pinfo exit method to exit, calculating cpu usage.
console_handler_thread_waiter. It is obsolete.
(ctrl_c_handler): Don't use console_handler_thread_waiter.
* path.cc (hash_path_name): Fix handling of relative names. Make case
insensitive.
* path.h (suffix_info): Use initializers.
* pinfo.h (_pinfo): Avoid initializers for null case.
* resource.cc (fill_rusage): Zero rest of rusage structure.
* security.cc (set_process_privileges): Don't reopen parent process. Just use
hMainProc.
* signal.cc (signal): Track when a signal handler has been used.
(sigaction): Ditto.
* sigproc.cc (pchildren): Use default initializer.
(zombies): Ditto.
(sigproc_terminate): Avoid closing handles that will be closed on exit anyway.
(wait_sig): Send signal to "parent" on EXECing, not FORKing.
(wait_subproc): Send SIGCHLD here rather than in proc_wait to avoid potential
muto conflicts.
* sigproc.h (sigthread): Don't initialize to zero. It's the default.
* spawn.cc (spawn_guts): Fill in resources from exec parent prior to
termination.
* sync.h (muto): Don't initialize to zero.
* syscalls.cc (close_all_files): Use one lock around entire loop and call
fhandler close/release stuff directly.
(_read): Don't use ready_for_read if there are not signal handlers active.
* dcrt0.cc (dll_crt0_1): Fix display of "title".
(do_exit): Use pinfo exit method to exit.
(__api_fatal): Ditto.
* exceptions.cc (signal_exit): Ditto.
* fork.cc (fork_child): Remove debugging stuff. Use pinfo_fixup_after fork in
place of exec_fixup_after_fork.
* pinfo.cc (pinfo_fixup_after_fork): New method.
(pinfo_fixup_in_spawned_child): Ditto.
(_pinfo::exit): New method.
(_pinfo::init): Remove recursion. Detect pathological case where pinfo
structure already exists for new pid.
* pinfo.h (_pinfo): Reorganize slightly. Add new method and new function
declarations.
* sigproc.cc (proc_exists): Previous simplification was a little to simple.
Try harder to detect if a process exists.
(proc_terminate): Use PID_EXITED setting to determine if process is still
around.
(WFSO): Remove debugging statement.
(WFMO): Ditto.
* spawn.cc (exec_fixup_after_fork): Eliminate.
(spawn_guts): Always set old_title to NULL. Is it really needed? Move
hexec_proc to pinfo.cc. Call pinfo_fixup_in_spawned_child to eliminate handle
link after a spawn.
* include/sys/cygwin.h: Remove PID_NOT_IN_USE. Add PID_EXITED.
parent.
* dcrt0.cc (do_exit): Don't cleanup pinfo on exit. That happens automatically
now.
* exceptions.cc (signal_exit): Ditto.
* fork.cc (fork_parent): Use stack_here value passed in from fork().
(fork): Figure out top of stack here and pass it to fork_parent.
* pinfo.cc (_pinfo::record_death): Eliminate.
* pinfo.h (_pinfo): Ditto.
* sigproc.cc (proc_exists): Simplify.
(proc_terminate): Ditto.
(remove_zombie): Don't cleanup pinfo stuff.
(wait_sig): Send subproc_ready signal whether execed or spawned.
* spawn.cc (spawn_guts): Always create subproc_ready event. Use it for both
exec and spawn.
(_spawnve): Send proper mode to spawn_guts when mode != _P_OVERLAY.
(child_info): Move some fields from child_info_spawn to here.
* cygheap.cc: Make cygheap pointers NOCOPY.
* dcrt0.cc (dll_crt0_1): Copy cygwin heap here regardless of whether we've been
forked or execed.
* dtable.cc (dtable::fixup_after_fork): Just release close-on-exec fds.
* exceptions.cc (stackdump): Respond to C warning.
* fork.cc: Reorganize to minimize stack copying.
(fork_child): New function.
(fork_parent): Ditto.
(sync_with_child): Don't suspend the forkee.
(sync_with_parent): Ditto. Make into a function.
* heap.cc (heap_init): Add some debugging output.
* path.cc (path_conv::check): Add an assertion.
(has_suffix): Ditto.
* security.cc (get_pw_sid): Defend against NULL.
* sigproc.cc (proc_subproc): Fix debugging output.
(wait_sig): Ditto.
* strace.cc: Make statics NO_COPY throughout.
(strace::vsprntf): Defend against NULL.
settings.
(dtable::fixup_after_fork): Ditto.
* exceptions.cc (set_sig_errno): Remove some debugging output.
* path.cc (path_conv::check): Don't OR need_directory with flags sent to
symlink_info::check.
(symlink_info::check): Use PATH_ALL_EXEC to determine when a file is
executable.
* path.h (path_types): Add PATH_ALL_EXEC.
(isexec): Use PATH_ALL_EXEC so that cygexec types will be considered
executable.
* pinfo.h (_pinfo): Add a process handle that is kept open throughout the life
of a cygwin pid.
* sigproc.cc (proc_exists): Remove hopefully obsolete stuff.
(proc_subproc): Set up process handle that is kept open throughout the life of
a cygwin pid. Reorganize PROC_WAIT stuff to use common code.
(proc_terminate): Close pid lifetime process handle.
(checkstate): Cleanup.
(stopped_or_terminated): Move zombie cleanup.
(remove_zombie): To here.
* spawn.cc (spawn_guts): Reorganize reparenting code for 1247th time.
frame pointer rather than using this within the function, which is unstable
when this method is not inlined.
* net.cc: Eliminate use of second argument to sigframe.set throughout.
* select.cc (cygwin_select): Ditto.
* sigproc.cc (sig_send): Ditto.
throughout.
* shared.h: Remove.
* cygwin_version.h: New file.
* delqueue.h: New file.
* environ.h: New file.
* host_dependent.h: New file.
* perprocess.h: New file.
* registry.h: New file.
* security.h: New file.
Include sys/termios.h for files which need it.
* tty.h: New file.
* shared_info.h: New file.
* fhandler.h: Move inline methods that rely on tty stuff to
fhandler_console.cc.
* fhandler_tty.cc (fhandler_pty_master::process_slave_output): Set
output_done_event immediately after reading data to speed up tty output
processing.
(process_output): Set write_error to errno or zero.
(fhandler_tty_slave::write): Check previous write error prior to writing to
slave end of pipe. This allows tty output to be slightly less synchronous.
* fhandler_console.cc (fhandler_console::tcsetpgrp): Moved here from
fhandler.h.
(fhandler_console::set_input_state): Ditto.
* pinfo.cc (pinfo::release): Move here from pinfo.h.
* sigproc.cc (proc_terminate): Remove bogus 'pinfo child' which caused strange
destruction of random regions of memory when destructor was invoked.
(_dll_crt0): To here.
(cygwin_dll_init): And here.
* external.cc (fillout_pinfo): Use more foolproof method for scanning for pids.
* pinfo.cc (set_myself): Eliminate myself_identity.init.
* sigproc.cc (wait_sig): Do it here instead to reduce the amount of time where
there could potentially be two processes with the same pid.
* spawn.cc (spawn_guts): Eliminate duplicate initialization.
* include/sys/cygwin.h: Mark unused PID_* elements.
exception handling on threads not created by cygwin.
* sigproc.cc (proc_terminate): Don't release pinfo structs since we are
exiting.
* include/sys/cygwin.h: Add CW_INIT_EXCEPTIONS.
required.
* errno.cc: Use DWORD to hold Windows errors.
(geterrno_from_win_error): New function.
(seterrno_from_win_error): Use geterrno_from_win_error to convert supplied
windows error (suggested by Corinna Vinschen).
* path.cc (symlink_info): Add error element.
* path.cc (path_conv::check): Remove errno setting. Use new symlink_info errno
element to set path_conv error, where appropriate.
(symlink_info::check): Set error element rather than attempting to manipulate
errno. Add more checks for trailing / and /.. even though they are currently
useless. Avoid setting EINVAL.
* path.cc (normalize_posix_path): Correct check for trailing /.
* *.cc: put winsup.h before other headers (for __INSIDE_CYGWIN__);
use cur_environ() instead of just environ
* times.cc: remove import protections
* glob.c: add winsup.h
* localtime.c: ditto
* smallprint.c: ditto
* Makefile.in: don't __INSIDE_CYGWIN__ as it messes up profiling.
variable argument macros when possible.
* sigproc.cc: Throughout, use sigproc_printf rather than sip_printf.
* strace.cc (strace::prntf): Remove 'active' check, since callers are supposed
to ensure this.
(__system_printf): Remove. Subsumed by strace::prntf.
* winsup.h: Define "NEW_MACRO_VARARGS" to indicate when to use new macro
varargs capability.
the changes below. Redefine process structure to avoid a fixed size table.
Redefine pinfo/_pinfo classes. Use these throughout.
* dcrt0.cc (dll_crt0_1): Accomodate set_myself argument change.
(__api_fatal): Accomodate _pinfo::record_death argument change.
* exceptions.cc (really_exit): Ditto.
(sig_handle_tty_stop): Use pinfo constructor to access process info.
(events_init): Don't create pinfo_mutex since it is no longer required.
* external.cc (fillout_pinfo): Use winpids class to iterate over all system
pids.
(cygwin_internal): lock_pinfo_for_update and unlock_pinfo are now noops.
* fhandler_termios.cc (fhandler_termios::set_ctty): Use pinfo constructor to
access process info.
* fork.cc (fork): Reorganize to initialize child info after the child has
started since that is when we know the child's winpid, which is necessary to
allocate the pinfo shared memory.
* mmap.cc (recreate_mmaps_after_fork): Change arg type to _pinfo.
* pinfo.cc: Rename pinfo methods to _pinfo throughout. Eliminate pinfo_list
stuff.
(set_myself): Accept a pid argument now. Call pinfo initializer to initialize
myself. Detect when this is an "execed" process and create an "indirect" pid
block.
(pinfo_init): Accomodate set_myself arg change.
(procinfo): Remove.
(pinfo::lock_pinfo): Remove.
(pinfo::unlock_pinfo): Remove.
(pinfo::init): New method. Allocates shared memory space for process pinfo
structure.
(pinfo::record_death): Don't call locking functions.
(cygwin_winpid_to_pid): Simplify by using new pinfo constructor.
(EnumProcessesW95): New function for iterating over processes on Windows 95.
(winpids::winpids): New constructor for winpids class. Sets up a list of
process ids.
(enum_init): Initialize w95/wnt pid enumerators.
* shared.cc (shared-info::initialize): Remove pid initialization.
* shared.h: Move pinfo stuff into pinfo.h.
(class shared_info): Remove pinfo_list element.
* signal.cc (kill_worker): Use pinfo constructor to access process info.
(kill_pgrp): Ditto. Use winpids methods to access list of processes.
* sigproc.cc: Throughout, modify to use _pinfo where appropriate.
(proc_exists (pid_t)): New function. Determines if a process exists based on
the pid.
(proc_exists (_pinfo *p): Use new proc_exists function above.
(proc_subproc): Copy pinfo stuff around rather than _pinfo pointers. Try to be
careful about releasing shared memory when we don't need it anymore. Remove
pinfo locks.
(remove_zombies): Remove pinfo memory when zombie is going away.
* sigproc.h: Reflect _pinfo/pinfo changes in sigproc.cc.
* spawn.cc (spawn_guts): Eliminate pinfo *child argument. Reorganize to only
initialize child pinfo after process has been started and we know the windows
pid.
(_spawnve): Reflect spawn_guts changes.
* syscalls.cc (setpgid): Use pinfo constructor to access process info.
(getpgid): Ditto.
(internal_getlogin): Use _pinfo.
* winsup.h: Eliminate pinfo_mutex. Eliminate spawn_guts declaration since it
is static now. Reflect set_myself argument change.
* include/sys/cygwin.h: Add some PID_* enums to accomodate new pinfo stuff.
* include/cygwin/version.h: Update minor version for cygdrive changes below.
referring to something like c:\.
* dcrt0.cc (dll_crt0_1): Move uinfo initialization prior to sig_send
initialization to give signal thread a chance to finish.
* debug.cc (WFSO): Move to sigproc.cc
(WFMO): Ditto.
* exceptions.cc (interruptible): Allocate slightly more space for directory
just for paranoia's sake.
(call_handler): Eliminate nonmain argument. Determine if main thread has set a
frame pointer and use it if so.
(sig_handle): Eliminate nonmain argument.
* net.cc: Record frame information in appropriate routines throughout.
* select.cc (select): Ditto.
* sigproc.cc: Use sigthread structure to record mainthread id throughout.
(sig_send): Record frame information for signal handler.
(wait_sig): Reflect argument change in sig_handle.
(WFSO): Move here and record frame information for signal handler.
(WFMO): Ditto.
* sigproc.h: Implement new "sigthread" class. Implement "sigframe" class for
manipulating signal frame info.
* thread.cc (__pthread_kill): Use standard _kill() function rather than calling
sig_send directly.
* winsup.h: Eliminate ebp element from signal_dispatch class.
* debug.cc (threadname_init): Pass name of lock as arg 2 of new_muto.
* malloc.cc (malloc_init): Ditto.
* sigproc.cc (sigproc_init): Ditto.
* exceptions.cc (events_init): Ditto.
(call_handler): Eliminate special case for hExeced. Report locked thread in
debugging output.
* fhandler.cc (fhandker_pipe::fhandler_pipe): Propagate device type to base
class.
* fhandler.h (fhandler_pipe): Ditto.
* hinfo.cc (hinfo::build_fhandler): Pass specific type of pipe to constructor.
* spawn.cc (spawn_guts): Eliminate dependency on signal when waiting for
subprocess.
* strace.cc: Remove obsolete #ifdef.
* sync.cc (muto::muto): Save the name of the muto.
(muto:~muto): Also release the muto.
* sync.h: Add a muto name field.
* select.cc (peek_pipe): Avoid doing a PeekNamedPipe on the write end of a
pipe.
on interrupt if executing in a "cygwin" thread.
* fhandler_tty.cc (fhandler_pty_master::process_slave_output): Streamline,
simplify code.
* sigproc.cc (sig_send): Remove debugging statement.
* exceptions.cc (sfta): Eliminate obsolete function.
(sgmb): Eliminate obsolete function.
(class stack_info): Remove MS method for walking the stack.
(stack_info::init): Just initialize required fields.
(stack_info::brute_force): Rename to stack_info::walk.
(handle_exceptions): Pass derived frame pointer to sig_send.
(interrupt_setup): Clear saved frame pointer here.
(interrupt_on_return): thestack is no longer a pointer.
(call_handler): Accept a flag to indicate when a signal was sent from other
than the main thread. Use saved frame pointer for determining where to place
signal handler call.
(sig_handle): Accept "nonmain" argument. Pass it to call_handler.
* fhandler_tty.cc (fhandler_tty_common::__acquire_output_mutex): Change
debugging output slightly.
* (fhandler_tty_common::__release_output_mutex): Ditto.
(fhandler_tty_slave::read): Fix a comment, remove a goto.
* sigproc.cc (sig_send): Accept an optional frame pointer argument for use when
suspending the main process. sigcomplete_main is an autoreset event now. Save
frame pointer for non-main operation.
(wait_sig): Make sigcomplete_main an autoreset event. Eliminate NOSIGQUEUE.
Pass rc to sig_handle to signify if this was a nonmain process.
* sigproc.h: Reflect change to sig_send argument.
* syscalls.cc (swab): Eliminate swab function since it is now available in
newlib.
* winsup.h (signal_dispatch): Change CONTEXT cx to DWORD ebp.
(getprogname): Eliminate obsolete function.
(dll_crt0_1): Move initial strace initialization output to set_myself.
* exceptions.cc (interruptible): Add debugging output.
(interrupt_setup): New function.
(interrupt_now): Use interrupt_setup to set up common interrupt handler stuff.
(interrupt_on_return): Ditto.
(call_handler): Move signal_arrived arm and clear threads to region where
signalled thread is suspended or suffer races.
* pinfo.cc (set_myself): Output interesting information when strace is first
initialized. Initialize progname here.
* sigproc.cc (sig_dispatch_pending): Modify to ensure that flush signal are
sent synchronously.
* strace.cc (strace_vsprintf): Move code into strace program.
* uname.cc (uname): Use 'osname' global to construct cygwin name + Windows type
+ version.
(call_handler): Allow signals to be sent even if signalled thread is stopped.
Change order of signal_arrived arming/waiting threads clearing to eliminate a
race.
(reset_signal_arrived): New helper function.
* malloc.cc (malloc_init): Use mutos so that signal handler can keep track of
who owns the lock.
(__malloc_lock): Ditto.
(__malloc_unlock): Ditto.
* sync.h (new_muto): Actually use a muto for the "buffer".
* Makefile.in: Fix a dependency.
* debug.cc (iscygthread): New function.
* debug.h: Declare it.
* exceptions.cc (set_process_mask): Flush pending signals.
(handle_sigsuspend): No need to flush pending signals.
(call_handler): Refine previous tests of muto ownership. Only clear wait()'s
when we have definitely responded to a signal.
* fhandler_console.cc (fhandler_console::read): Don't set EINTR if executing in
a "cygwin" thread.
* sigproc.cc (proc_subproc): Use second argument to control whether CLEARWAIT
actually sets "signalled" flag.
* sync.h (muto): Add 'unstable' method.
interruptible.
(call_handler): Avoid suspending a thread if it owns a mutex. Only set
signal_arrived if the thread was actually interrupted.
(events_init): Initialize module information needed by interruptible().
(sigdelayed): Don't call sig_dispatch_pending since it could screw up
* init.cc (dll_entry): Record module handle of main for use by interruptible().
(proc_subproc): Reorganize handling of terminated child so that the bulk of the
processing comes from the signal thread.
(wait_sig): Force processing of waiting threads if SIGCHLD is not processed.
* sync.cc (muto::release): Set tid == 0 after lock is released or signal
processor will be confused.
Christopher Faylor
Corinna Vinschen
Egor Duda
DJ Delorie