- With this patch, FILE_SYNCHRONOUS_IO_NONALERT flag is applied to
the read pipe so that native C# programs work with cygwin pipe.
To handle signals in reading pipe with this flag set, the read
pipe itself is always set to nonblocking mode and simulates the
blocking behaviour in raw_read().
- Default to byte mode rather than message mode in order to make
C# programs work with cygwin pipe.
Addresses: https://cygwin.com/pipermail/cygwin/2021-March/247987.html
- With pseudo console enabled, if the non-cygwin app is started in
the background and put it into the foreground, the process cannot
be stopped by Ctrl-C. This patch fixes the issue.
- This patch fixes the bug that input is wrongly sent to io_handle_nat
rather than io_handle when neither read() nor select() is called
after the cygwin app is started from non-cygwin app. This happens
only if psuedo console is disabled.
Addresses:
https://cygwin.com/pipermail/cygwin-patches/2021q4/011587.html
- The last change in path.cc introduced a bug that causes an error
when accessing a virtual drive which mounts UNC path such as
"\\server\share\dir" rather than "\\server\share". This patch
fixes the issue.
This avoids warning with autoconf >= 2.70:
configure.ac:47: warning: The macro `AC_CONFIG_HEADER' is obsolete.
AC_CONFIG_HEADERS has been supported since before autconf 2.59, the
minimum version we can be using, controlled by AC_PREREQ.
Rather than special case status code 0xc00004b3, add status and matching
error code to ntdll.h and handle it as part of the standard error mapping.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
To keep getrlimit/setrlimit clean, move the RLIMIT_AS code into
local static functions __set_rlimit_as and __get_rlimit_as.
Also, make adding process to the job the last step, to be able to
close and release the job resources if anything failed. Add matching
comment.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
If the incoming soft limit is less restrictive than the current
hard limit, bail out with EPERM. Given the previous sanity check,
this implies trying to raise the hard limit. While, theoretically,
this should be allowed for privileged processes, Windows has no
matching concept in terms of job limits
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Code based on the idea implemented by the oneTBB project,
see https://github.com/oneapi-src/oneTBB
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
NtReadFile can return STATUS_PENDING occasionally even in non-blocking
mode. Check for this and wait for NtReadFile to complete. To avoid
code repetition, do this in a static helper function nt_read.
https://cygwin.com/pipermail/cygwin/2021-November/249930.html
reported a regression introduce by using a dynamically sized local
char array in favor of a statically sized array.
Fix this by reverting to a statically sized array, using a small
buffer on the stack for a reasonable number of requested digits, a
big mallocated buffer otherwise. This should work for small targets
as well, given that malloc is used in printf anyway right now.
This is *still* hopefully just a temporary measure, unless somebody
actually provides a new ldtoa.
Fixes: 4d90e53359 ("ldtoa: fix dropping too many digits from output")
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
raise(2) on Linux returns the same values and sets errno
independent of calling kill(2) or pthread_kill(3). Align
code to behave the same.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The check for the pthread self pointer in TLS is misleading,
given the main thread has this pointer initialized as well.
Check for the global __isthreaded flag as well.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- This patch fixes the issue that process sometimes hangs for 60
seconds with the following scenario.
1) Open command prompt.
2) Run "c:\cygwin64\bin\bash -l"
3) Compipe the following source with mingw compiler.
/*--- Begin ---*/
#include <stdio.h>
int main() {return getchar();}
/*---- End ----*/
4) Run "tcsh -c ./a.exe"
5) Hit Ctrl-C.
The file attributes after creating a file are not necessarily
identical to the attributes we passed as argument to NtCreateFile.
This results in subsequent operations like fchmod or facl to
set the DOS file attributes to unexpected values.
The fix is to request file attributes from the OS after file creation
and cache those.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
When running Cygwin's Bash in the Windows Terminal (see
https://docs.microsoft.com/en-us/windows/terminal/ for details), Cygwin
is receiving keyboard input in the form of UTF-16 characters.
UTF-16 has that awkward challenge that it cannot map the full Unicode
range, and to make up for it, there are the ranges U+D800-U+DBFF and
U+DC00-U+DFFF which are illegal except when they come in a pair encoding
for Unicode characters beyond U+FFFF.
Cygwin does not handle such surrogate pairs correctly at the moment, as
can be seen e.g. when running Cygwin's Bash in the Windows Terminal and
then inserting an emoji (e.g. via Windows + <dot>, which opens an emoji
picker on recent Windows versions): Instead of showing an emoji, this
shows the infamous question mark in a black triangle, i.e. the invalid
Unicode character.
Let's special-case surrogate pairs in this scenario.
This fixes https://github.com/git-for-windows/git/issues/3281
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Use the same name as glibc & gnulib to indicate "newlib itself is
being compiled". This also harmonizes the codebase a bit in that
_LIBC was already used in places instead of _COMPILING_NEWLIB.
Building for bfin-elf, mips-elf, and x86_64-pc-cygwin produces
the same object code.
A recent change in binutils marks the .gnu_debuglink_overlay section
as debug section. When dllfixdbg calls objcopy -g, the section
is removed and the --add-gnu-debuglink option on the same command line
appends the section consequentially at the end of the sections.
This in turn breaks Windows Version info and, potentially, raising
the cygheap size at runtime.
Fix this by adding an explicit --keep-section=.gnu_debuglink_overlay
to the objcopy command line.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
isabspath handles a path "X:", without trailing slash or backslash,
as absolute path. This breaks some scenarios with relative paths
starting with "X:". For instance, fstatat will mishandle a call
with valid dirfd and "c:" as path.
The reason is that gen_full_path_at() will check for isabspath("C:")
which returns true. So the path will be used verbatim in fstatat,
rather than being converted to a path "<dirfd-path>/c:".
So, introduce isabspath_strict, which returns true for paths starting
with "X:" only if the next char is actually a slash or backslash.
Use it from gen_full_path_at().
This still fixes only half the problem. The right thing would have been
to disallow using DOS paths in the first place. Unfortunately it's much
too late for that.
Addresses: https://cygwin.com/pipermail/cygwin/2021-November/249837.html
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Cygwin always requests FILE_WRITE_ATTRIBUTES permissions when trying to
change DAC information. This can lead to permission problems when
trying to chmod/chown files on Samba shares. Drop requesting
FILE_WRITE_ATTRIBUTES on Samba shares and go with WRITE_DAC/WRITE_OWNER
only.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Also rename release 3.4.0 to 3.3.2. It doesn't make sense to
duplicate the issues fixed in 3.3.x into the 3.4.0 relnotes.
Only patches not backported into 3.3.x belong into 3.4.0.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- Currently, bash occasionally exits by Ctrl-C with the following
scenario.
1) Start bash in the command prompt.
2) Run 'exec bash'.
3) Press Ctrl-C several times.
This patch fixes the issue.
- Currently, read() returns EINTR due to a bug if signal handler
is SIG_DFL and the process is suspended by Ctrl-Z and restarted.
This patch fixes the issue.
i. e. Vista/2008. This drops support for the sr_CS locale.
Regenerate LC_MESSAGES and LC_TIME ERA data from more recent Linux
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
i. e., Vista/2008.
AllocConsole appears to allow creating a console only on the currently
visible desktop since Windows 7, which broke the simple code opening
the console on an invisible desktop in an invisible window station.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Per https://cygwin.com/pipermail/cygwin-developers/2021-October/012429.html,
we may encounter a crash when starting multiple threads during process
startup (here: fhandler_fifo::fixup_after_{fork,exec}) which in turn
allocate memory via malloc.
The problem is concurrent usage of malloc before the malloc muto has
been initialized.
To fix this issue, convert the muto to a SRWLOCK and make sure it is
statically initalized. Thus, malloc can be called as early as necessary
and malloc_init is only required to check for user space provided malloc.
Note that this requires to implement a __malloc_trylock macro to be
called from fork.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
This patch unifies the layout of the clipboard descriptor cygcb_t for
32- and 64-bit Cygwin. It allows correct copy/paste between the two
environments without corruption of user's copied data and without access
violations due to interpreting that data as a size field.
The definitions of CYGWIN_NATIVE and cygcb_t are moved to a new include
file, sys/clipboard.h. The include file is used by fhandler_clipboard.cc
as well as getclip.c and putclip.c in the Cygwin cygutils package.
When copy/pasting between 32- and 64-bit Cygwin environments, both must
be running version 3.3.0 or later for successful operation.
- The commit b531d6b0 introduced temporary_query_hdl() which uses
SystemHandleInformation. With this patch, ProcessHandleInformation
rather than SystemHandleInformation is used if it is available.
This request is faster, however, is only available since Windows 8,
therefore, SystemHandleInformation is used for Windows Vista and 7
as before.
- The commit f79a4611 introduced query_hdl, which is the read pipe
handle kept in the write pipe instance in order to determine if
the pipe is ready to write in select(). This implementation has
a potential risk that the write side fails to detect the closure
of the read side if more than one writer exists and one of them
is a non-cygwin process.
With this patch, the strategy of commit f79a4611 is used only if
the process is running as a service. For a normal process,
instead of keeping query_hdl in the write pipe instance, it is
retrieved temporarily when select() is called. Actually, we
want to use tenporary query_hdl for all processes, however, it
does not work for service processes due to OpenProcess()
failure.
open_setup is called by dtable::init_std_file_from_handle and
fhandler_base::open_with_arch. In both cases, failure of open_setup
is now a fatal error.
Currently this can only happen in the following situation: A Cygwin
process is started by a non-Cygwin process, one of the standard IO
handles is a pipe handle, and Cygwin is unable to create a required
mutex (read_mtx or hdl_cnt_mtx).
- query_hdl and hdl_cnt_mtx are moved from fhandler_pipe_fifo to
fhandler_pipe. Then reader_closed() is changed to virtual and
overridden in fhandler_pipe.
- This patch fixes the race issue in the handle counting to detect
closure of read pipe, which is introduced by commit f79a4611.
A mutex hdl_cnt_mtx is introduced for this issue.
- Currently, the stderr handle is duplicated in close_all_files().
This interferes the handle counting for detecting closure of read
pipe, which is introduced by commit f79a4611. This patch stops
duplicating stderr handle if it is write pipe.
NtQueryInformationFile hangs if it's called on the read side handle of
a pipe while another thread or process is performing a blocking read.
Avoid select potentially hanging by calling NtQueryInformationFile
only on the write side of the pipe and using PeekNamedPipe otherwise.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- In pipe_data_available() in select.cc, PeekNamedPipe() call is
not needed if WriteQuotaAvailable is non-zero because we already
know the write pipe has a space. Therefore, with this patch,
PeekNamedPipe() is called only when WriteQuotaAvailable is zero.
This makes select() on pipe faster a bit.
- Currently, raw_read(), raw_write() and close() release select_sem
unconditionally even if no waiter for select_sem exists. With this
patch, only the minimum number of semaphores required is released.
- Usually WriteQuotaAvailable retrieved by NtQueryInformationFile()
on the write side reflects the space available in the inbound buffer
on the read side. However, if a pipe read is currently pending,
WriteQuotaAvailable on the write side is decremented by the number
of bytes the read side is requesting. So it's possible (even likely)
that WriteQuotaAvailable is 0, even if the inbound buffer on the
read side is not full. This can lead to a deadlock situation:
The reader is waiting for data, but select on the writer side
assumes that no space is available in the read side inbound buffer.
Currently, to avoid this stuation, read() does not request larger
block than pipe size - 1. However, this mechanism does not take
effect if the reader side is non-cygwin app.
The only reliable information is available on the read side, so
fetch info from the read side via the pipe-specific query handle
(query_hdl) introduced.
If the query_hdl (read handle) is kept in write side, writer can
not detect closure of read pipe. Therefore, raw_write() counts
write handle and query_hdl. If they are equal, only the pairs of
write handle and query_hdl are alive. In this case, raw_write()
returns EPIPE and raises SIGPIPE.
- Nonblocking pipes (PIPE_NOWAIT) are not well handled by non-Cygwin
tools, so convert pipe handles to PIPE_WAIT handles when spawning
a non-Cygwin process.
We already fetched the correct SECURITY_ATTRIBUTES at the start of
fhandler_pipe::create, so using another SECURITY_ATTRIBUTES object for
the mutex and semaphore objects doesn't make much sense.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
select_sem gets created on the read side with inheritence settings
depending on the O_CLOEXEC flag. Then it gets duplicated to the write
side with unconditional inheritence. Fix that.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Fold all code branches potentially having read or written data into
a single if branch, so signalling select_sem catches all cases.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Rename fhandler_pipe_and_fifo::max_atomic_write to pipe_buf_size.
This reflect its actual meaning better. The fhandler_pipe_and_fifo
constructor initializes it to DEFAULT_PIPEBUFSIZE (== 64K), which is
the buffer size for the windows pipes created by fhandler_pipe and
fhandler_fifo. But if we inherit a stdio pipe handle from a
non-Cygwin process, the buffer size could be different.
To remedy this, add a method fhandler_pipe::set_pipe_buf_size that
queries the OS for the pipe buffer size, and use it in
dtable::init_std_file_from_handle.
Given we return 1 already if WriteQuotaAvailable is > 0, the condition
for tiny pipes is never true. Fix the comments.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
In blocking mode, the underlying IO must always be terminated,
one way or the other, to make sure the application knows the exact
state after returning from the IO function. Therefore, always call
CancelIo in blocking mode.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Just cancelling a thread doesn't cancel async IO started by this thread.
Fix this by returning from cygwait and calling CancelIo before canceling
self.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- By guarding read with read_mtx, no more than one ReadFile can
be called simultaneously. So couting read handles is no longer
necessary.
- Make raw_read code as similar as possible to raw_write code.
This is a parent of fhandler_pipe and fhandler_fifo for code that is
common between the two classes. Currently it just contains
max_atomic_write and raw_write(). The latter is identical to what
used to be fhandler_pipe::raw_write().
FILE_PIPE_LOCAL_INFORMATION::WriteQuotaAvailable is unreliable.
Usually WriteQuotaAvailable on the write side reflects the space
available in the inbound buffer on the read side. However, if a
pipe read is currently pending, WriteQuotaAvailable on the write side
is decremented by the number of bytes the read side is requesting.
So it's possible (even likely) that WriteQuotaAvailable is 0, even
if the inbound buffer on the read side is not full. This can lead to
a deadlock situation: The reader is waiting for data, but select
on the writer side assumes that no space is available in the read
side inbound buffer.
This patch implements a workaround by never trying to read more than
half the buffer size blocking if the read buffer is empty. This first
cut tries to take the number of open readers into account by reducing
the amount of requested bytes accordingly.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
POSIX requires atomicity for non-blocking writes <= PIPE_BUF bytes
and writing of at least 1 byte if any buffer space is left.
Windows NtWriteFile returns STATUS_SUCCESS and "0 bytes written"
if the write doesn't match buffer space. Fix this discrepancy.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The buffer pointer is incremented by "chunk", which is what we
typically try to write, but this isn't what actually got written.
Increment the buffer pointer by what we actually wrote, as returned
by NtWriteFile.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
get_obj_handle_count() is used in flock only so far, but pipe
handling might have a usage, too, soon. Given that this function
might be generally useful and isn't restricted to flock usage,
move it to miscfuncs.cc and make it non-static. Add a prototype
in miscfuncs.h.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
I wasted valuable minutes of my life just to find out why we export
this weird version of pipe. In the pre-2000 era the idea was Cygwin
could be used as drop-in replacement for msvcrt.dll, apparently.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The read handles of pipes created by CreateNamedPipe don't have
FILE_WRITE_ATTRIBUTES access unless the pipe is created with
PIPE_ACCESS_DUPLEX. This causes set_pipe_non_blocking to fail on such
handles. To fix this, add a helper function nt_create, which uses
NtCreateNamedPipeFile instead of CreateNamedPipe and gives us more
flexibility in setting access rights.
Use this helper function in fhandler_pipe::create (fhandler_pipe *[2],
unsigned, int), which is the version of fhandler_pipe::create used by
the pipe and pipe2 system calls.
For convenience, also add a static member function
fhandler_pipe::npfs_handle similar to those used by fhandler_fifo and
fhandler_socket_unix.
Add methods 'set_pipe_non_blocking' and 'fcntl' to keep the blocking
mode of the Windows pipe in sync with that of the fhandler_pipe
object. This applies to pipes created with the 'pipe' and 'pipe2'
system calls.
Previously fhandler_pipe was derived from fhandler_base_overlapped,
which we are going to remove in a future commit. Make minimal changes
so that the build still succeeds.
In https://cygwin.com/pipermail/cygwin/2021-September/249361.html
Brian pointed out that initializing the structure would be more
future proof, should the developers at Microsoft ever decide to
split the Reserved field and use some bits of the struct for
other purposes.
Fixes: 3d322ac930 ("Cygwin: fix initializing MEM_EXTENDED_PARAMETER")
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
MEM_EXTENDED_PARAMETER consists of a 64 bit bitfield which contains
the Type and the Reserved members. The former usage of designated
initializer lists initialized Type, but not Reserved. Since that's
not possible anymore due to a g++ 11.2 bug, Cygwin initializes the
MEM_EXTENDED_PARAMETER structs explicitely. This results in a
random value in Reserved, which at least VirtualAlloc2 chokes on
(ERROR_INVALID_PARAMETER).
Set Reserved explicitely to 0 for a fix.
Fixes: bdb7991db3 ("Cygwin: workaround a g++ 11.2 initialization bug")
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The handle is created non-inheritable but gets inheritable when
dup'ing the file descriptor. Fix that.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Modern gcc's generate additional DWARF 5 debug sections, which were
still missing in our Cygwin loader script. With ld from binutils 2.37,
this results in diagnostic output when linking the Cygwin DLL...
ld: cygwin0.dll:/4: section below image base
ld: cygwin0.dll:/20: section below image base
ld: cygwin0.dll:/36: section below image base
...and the section addresses given to these sections (.debug_loclists,
.debug_rnglists, debug_line_str) will be wrong.
Fix this by adding the missing DWARF 5 sections to our linker script
template cygwin.sc.in. Add a comment in terms of the deprecated
DWARF 4 section .debug_types.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
This was used before switching to automake to allow easy tweaking
of optimization and debugging settings from the command line during
testing. Reenable.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
trying to use aggregate initialization syntax on a member of a
nameless union member failes in g++ 11.2.
Workaround this by using explicit initialization.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The GCC diagnostic ignored "-Wstringop-overflow" pragma doesn't work
as expected anymore. Use the still working expression.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The register keyword was already deprecated with C++11, but
with C++17 it has been entirely removed.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Revert mx parameter and mutex lock while operating the list.
Mutex was removed with 94d24160 informing that:
'Use InterlockedCompareExchangePointer to ensure race safeness
without using a mutex.'
But it does not.
Calling pthread_mutex_init and pthread_mutex_destroy from two or
more threads occasionally leads to hang in pthread_mutex_destroy.
To not change the behaviour of other cases where List_insert was called,
List_insert_nolock is added.
As outlined in the previous patch, the non-atomicity of iterating
over a directory in the NT namespace via NtQueryDirectoryObject
one entry each, results in potential duplication of directory entries.
Fix this for fhandler_procsys::readdir as well by fetching the entire
dir inside fhandler_procsys::opendir, storing it in a buffer, and just
return buffer content from fhandler_procsys::readdir.
Fixes: 43f65cdd7d ("fhandler_procsys.cc: New file.")
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Due to reports on the Cygwin mailing list[1][2], it was uncovered
that a NtOpenDirectoryObject/NtQueryDirectoryObject/NtClose sequence
with NtQueryDirectoryObject iterating over the directory entries,
one entry per invocation, is not running atomically. If new entries
are inserted into the queried directory, other entries may be moved
around and then accidentally show up twice while iterating.
Change (almost) all NtQueryDirectoryObject invocations so that it gets
a really big buffer (64K) and ideally fetches all entries at once.
This appears to work atomically.
"Almost" all, because fhandler_procsys::readdir can't be easily changed.
[1] https://cygwin.com/pipermail/cygwin/2021-July/248998.html
[2] https://cygwin.com/pipermail/cygwin/2021-August/249124.html
Fixes: e9c8cb3193 ("(format_proc_partitions): Revamp loop over existing harddisks by scanning the NT native \Device object directory and looking for Harddisk entries.")
Fixes: a998dd7055 ("Implement advisory file locking.")
Fixes: 3b7cd74bfd ("(winpids::enum_processes): Fetch Cygwin processes from listing of shared cygwin object dir in the native NT namespace.")
Fixes: 0d6f2b0117 ("syscalls.cc (sync_worker): Rewrite using native NT functions.")
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Commit 3434d35a64 fixed a problem when
accessing block devices via their /proc/sys/Device entries. This
changed the way stat info is generated for these devices, resulting
in identical inode numbers for all block devices under /proc/sys/Device.
This patch fixes that by faking a device number for these devices, just as
before.
Fixes: 3434d35a64 ("Cygwin: Fix access to block devices below /proc/sys.")
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Make sure to cast to ulong all DWORD values displayed with format "%lu".
More instances are fixed here than in either my earlier unused patch or
Corinna's patch. I decided to use typedef..ulong for more compact code.
Address jturney's reported small issues:
- Remove explicit external ref for cygwin_internal() as it is already
provided by <sys/cygwin.h>.
- Leave intact ref for cygwin_dll_path[] as it is required by function(s)
in path.cc that profiler uses. Added comment to that effect.
- Delete existing main() wrapper. Rename main2() to main(). This because
profiler is now a Cygwin program and doesn't need to dynamically load
cygwin1.dll.
- Documentation issues will be addressed in a separate xml patch.
(I would have linked message-ids of Corinna's and Jon's messages for
proper theading but I no longer have their original emails and the mail
archives don't show msgids any more.)
The doc for gmondump says 1 or more FILENAME are expected, but 0 is
handled. That's an oversight. Make invocation with 0 FILENAMEs print a
one-line help message.
Reword the beginning of profiler's description doc to clarify target's
child processes are run but only optionally profiled.
If a service is supported as TCP and UDP service, GetAddrInfo does not
return two entries, one for TCP, one for UDP, as on Linux. Rather, it
just returns a single entry with ai_socktype and ai_protocol set to 0.
If the service only exists as TCP or UDP service, then ai->ai_socktype
is set, but ai_protocol isn't.
Fortunately we copy over the result from Windows into local storage
anyway, so this patch adds code to fix up the fields neglected by
Windows. In case ai_socktype as well as ai_protocol are 0, duplicate
the entry with valid values for ai_socktype and ai_protocol.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
If an interface is disconnected, net.cc:get_ifs tries to fetch IPv4
addresses from the registry. If it fails, it currently returns
pointers to sockaddr structs with zero address. Return a NULL pointer
instead, to signal the caller of getifaddrs that we do not have a
valid struct sockaddr.
Partially addresses: https://cygwin.com/pipermail/cygwin/2021-July/248970.html
It appears to be the case that NtQueryTimer can return a negative time
remaining for an unsignalled timer. The value appears to be less than
the timer resolution.
Signed-off-by: David Allsopp <david.allsopp@metastack.com>
DWORD has different types on 32 and 64 bit. Use a common cast to
unsigned long to use %lu format for DWORD values throughout.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
These are updates to wire into the build tree the new tools profiler and
gmondump, and to supply documentation for the tools.
The documentation for profiler and ssp now mention each other but do not
discuss their similarities or differences. That will be handled in a
future update to the "Profiling Cygwin Programs" section of the Cygwin
User's Guide, to be supplied.
This new tool was formerly part of 'profiler' but was spun out thanks to
Jon T's reasonable review comment. Gmondump is more of a debugging tool
than something users might have need for. Users would more likely use
gprof to make use of symbolic info like function names and source line
numbers.
The new tool formerly known as cygmon is renamed to 'profiler'. For the
name I considered 'ipsampler' and could not think of any others. I'm open
to a different name if any is suggested.
I decided that a discussion of the pros and cons of this profiler vs the
existing ssp should probably be in the "Profiling Cygwin Programs" section
of the Cygwin User's Guide rather than in the help for either. That
material will be supplied at some point.
CONTEXT buffers are made child-specific and thus thread-specific since
there is one profiler thread for each child program being profiled.
The SetThreadPriority() warning comment has been expanded.
chmod() works on Cygwin so the "//XXX ineffective" comment is gone.
I decided to make the "sample all executable sections" and "sample
dynamically generated code" suggestions simply expanded comments for now.
The profiler program is now a Cygwin exe rather than a native exe.
The Linux man page for cfsetspeed(3) specifies that the speed argument
must be one of the constants Bnnn (e.g., B9600) defined in termios.h.
But Linux in fact allows the speed to be the numerical baud rate
(e.g., 9600). For consistency with Linux, we now do the same.
Addresses: https://cygwin.com/pipermail/cygwin/2021-July/248887.html
The default PSAPI_VERSION is controlled by WIN32_WINNT, which we set to
0x0a00 when building utils since 48a76190 (and is the default in w32api
>= 9.0.0)
In order for the built executables to run on Windows Vista, we must also
define PSAPI_VERSION as 1 (otherwise '#define GetModuleFileNameExA
K32GetModuleFileNameExA' causes a 'The procedure entry point
K32GetModuleFilenameExA could not be located in the dynamic link library
kernel32.dll' error at run time).
Also drop uneeded psapi.h from dlfcn.cc (31ddf45d), resource.cc
(34a6eeab) and ps.cc (1def2148).
Use <cmdsynopsis> element markup in utils docbook documentation, rather
than some preformatted text inside <screen>.
(This didn't happen as part of 646745cb, when we first started using
refentry elements to make it possible to generate manpages)
This helps produce better looking manpages:
* uses bold (for command names) and italic (for replaceable items)
* different output formats inconsistently treat tabs inside <screen>
(so we have to be careful to not use them in that preformatted text)
Also clean up various issues:
* Replace '[OPTIONS]' with a real synopsis of the options
* Consistently use 'ITEM...' rather than 'ITEM1 [ITEM2...]' for an item
which should appear 1 or more times (cygcheck -f, getfacl, kill)
* Consistently document the '-h | -V' invocation form
* Since replaceable items are now marked up so they have some formatting
indicating they are replaceable, we can drop wrapping them in angle
brackets, as is done in some places
* Add missing '-W' and '-p PID' options to ps synopsis
* Adjust cygpath synopsis to show that only one 'System information'
option is allowed, possibly modified by -A
Future work:
* Sync up the actual help emitted by the util, where it's been improved
* Also don't use <screen> for formatting 'OPTIONS' section of manpage
* pldd inconsistently uses '-?' rather than '-h'!
* Drop duplicate 'Options:' headers (mkgroup, mkpassword)
* Add missing indication that MACHINE is optional with -L (mkgroup, mkpassword)
* Tweak some <refpurpose> which try to be a synopsis, rather than a decription (passwd, ssp)
* Drop some stray '\n' in setfacl options
* Move 'Original Author' note in ssp to an AUTHORS section
* Use <para> to improve formatting of tzset manpage
xterm 368 and mintty 3.5.1 implement a new feature to support
notification of terminal scaling via font zooming also if the terminal
text dimensions (rows/columns) stay unchanged, using
ioctl(TIOCSWINSZ), raising SIGWINCH;
this patches cygwin to support that scenario
The new GetFinalPathNameW handling for native symlinks in inner path
components is disabled if caller doesn't want to follow symlinks, or
doesn't want to follow reparse points.
The check for a file or dir within /dev/mqueue is accidentally using
the incoming path, which could be a relative path. Make sure to
restore the absolute POSIX path in path_copy and only then test the
path.
Also, move the actual check for a valid path below /dev/mqueue into
the fhandler_mqueue class.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
/dev has been handled as virtual dir in cwdstuff, thus not allowing
to start native apps from /dev as CWD, even if /dev actually exists
on disk. Unfortunately this also affects Cygwin executables started
from a debugger.
When chdir'ing to /dev, check if /dev exists on disk. If so, treat
it as any other existing path.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
reuse fhandler_virtual implementation to implement read and lseek.
The output from read(2) is modelled after the output when reading
from an mq file on Linux.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Ken Brown
Takashi Yano
Jon Turney
Corinna Vinschen
Johannes Schindelin
Mike Frysinger
Mark Geisert
Aleksand Malikov
David Allsopp
Thomas Wolff
Jeremy Drake
Brian Inglis