* Change default fallback for failed winsock error -> POSIX error
mappings to EACCES, which is a valid errno for more socket-related
syscalls.
* Added a few previously missing entries to the wsock_errmap table
that have obvious POSIX errno.h analogues.
Add methods need_fixup_before, init_fixup_before, and
fixup_before_fork_exec to accomplish this. Stopping the thread makes
sure that the client handler lists of the parent and child remain in
sync while the forking/execing is in progress.
Don't use the same i/o handle for the first client handler as is used
for the fhandler itself; this can lead to a later attempt to close the
same handle twice. Instead use a duplicate.
* Pre-release version still reporting kernel version 6.4.
* Windows 10 1511 is out of support since 2017-10-10.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Define fhandler:fifo::fixup_after_exec, which sets listen_client_thr
and lct_termination_evt to NULL. This forces the listen_client thread
to restart on the first attempt to read after an exec. Previously the
exec'd process could hang in fhandler_fifo::raw_read.
Remove fifo_client_handler::connect and move its code into
listen_client_thread. That way we can check the return status when a
client handler's connect_evt is signaled. Previously we incorrectly
assumed there was a successful connection.
Also simplify listen_client_thread in the following ways:
- Replace fhandler_fifo::disconnect_and_reconnect by a new
delete_client_handler method. Now we just delete invalid client
handlers rather than trying to re-use them.
- Try to maintain a client handler list that consists of connected
client handlers and exactly one that is listening for a connection.
This allows us to call WaitForMultipleObjects with only two wait
objects.
- Remove 'dummy_evt' from the fifo_client_handler struct; it is no
longer needed.
- On exit from listen_client_thread, delete the "extra" (listening)
client handler. Otherwise there could be a connection that doesn't
get recorded in the client handler list. This could happen when a
file descriptor is being duplicated.
Don't set the write end of the pipe to non-blocking mode if the FIFO
is opened in blocking mode.
In fhandler_fifo::raw_write in blocking mode, wait for the write to
complete rather than returning -1 with EAGAIN.
If the amount to write is large, write in smaller chunks (of size
determined by a new data member max_atomic_write), as in
fhandler_base_overlapped.
For convenience, add two new NTSTATUS codes, STATUS_THREAD_SIGNALED
and STATUS_THREAD_CANCELED, to ntdll.h.
After copyto is called, make the new fhandler's pipe_name point to the
new fhandler's pipe_name_buf, which is a *copy* of the old fhandler's
pipe_name_buf. Previously, get_pipe_name would return the wrong
result after a clone/dup, causing create_pipe_instance and open_pipe
to fail.
Also, stop the listen_client thread when cloning. Otherwise the
thread can keep accepting connections that the cloned fhandler won't
know about.
Do this via a new method fhandler_fifo::stop_listen_client, extracted
from fhandler_fifo::close.
Make read_ready a manual reset event. It should always be set shortly
after startup of the listen_client thread and remain set until the
thread terminates. (We don't want writers to connect without being
recorded in the client handler list.)
Remove the unnecessary code that checks for read_ready when a reader
is opening.
Add data members 'reader', 'writer', and 'duplexer' to the
fhandler_fifo class. Set them in fhandler_fifo::open. ('duplexer'
replaces the previous '_duplexer'.)
This will be useful in later commits.
The word "client" suggests something that holds a handle to the client
side of the pipe (in Windows terminology). But our
fifo_client_handlers hold a handle the server side of the pipe, and
they *connect* to clients.
Rather than newest last write time of all dlls loaded, use the forking
process' windows pid and windows thread id as directory name to create
the forkable hardlinks into. While this may create hardlinks more
often, it does avoid conflicts between dlls not having the newest last
write time.
* Changes error handling to allow /proc/[pid]/ virtual files to be
empty in some cases (in this case the file's formatter should return
-1 upon error, not 0).
* Better error handling of /proc/[pid]/stat for zombie processes:
previously trying to open this file on zombie processes resulted
in an EINVAL being returned by open(). Now the file can be read,
and fields that can no longer be read are just zeroed.
* Similarly for /proc/[pid]/statm for zombie processes.
* Similarly for /proc/[pid]/maps for zombie processes (in this case the
file can be read but is zero-length, which is consistent with observed
behavior on Linux.
- After 24 bit color support patch, arrow keys and function keys
do not work properly in native console applications if they
are started in cygwin console. This patch fixes this issue.
In case SA_SIGINFO flag is given, the signal handler may change
the context and the application is supposed to pick up from the
changed context. So far we don't do that, so the context given
to the signal handler is basically read-only, unless the signal
handler calls setcontext or swapcontext.
For a start, restore the thread's signal mask from the uc_sigmask
value of the context given to the signal handler.
If that's feasible for Cygwin, we restore the entire context from
the context changed by the signal handler in a followup patch.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
commit d1be0a59d4,
"Cygwin: winpids: Fix getting process multiple times"
fixed duplicate processes in ps -W output, but it fixed
the symptom, not the cause. It also didn't fix the problem
that the `ps' process itself may show up twice in its own
output.
This patch fixes it. The spawn worker only deleted the
"winpid.PID" symlink of the current process if the child is
a non-Cygwin process, under the assumption that the exec'ing
process exits anyway. However, the Window in which both
winpid.PID symlinks point to the same cygpid.PID area is just
too long. The spawn worker now also deletes its own winpid.PID
symlink if the exec'ed process is a Cygwin process.
Additionally the fix from d1be0a59d4
is now performed on the calling process, too.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- Add 24 bit color support using xterm compatibility mode in
Windows 10 1703 or later.
- Add fake 24 bit color support for legacy console, which uses
the nearest color from 16 system colors.
In dll_crt0_0, both threadinterface->Init and sigproc_init allocate
windows object handles using unpredictable memory regions, which may
collide with dynamically loaded dlls when they were relocated.
Make fhandler_base::clear_readahead virtual, and implement
fhandler_fifo::clear_readahead. This is called by
dtable::fixup_after_exec; it clears the readahead in each client.
Starting w/ the intro of S4U, seteuid32() calls lsaprivkeyauth(), then
s4uauth(). s4uauth calls LsaRegisterLogonProcess().
LsaRegisterLogonProcess fails w/ STATUS_PORT_CONNECTION_REFUSED, if the
proper privileges are not held.
Because of RtlNtStatusToDosError(), this status would be mapped to
ERROR_ACCESS_DENIED, which in turn would map to EACCES. Therefore it is
useless to add this status to errmap[] (errno.cc), as s4auauth() should
return EPERM as errno here (i.e. if process is not privileged).
Hence the kludge.
Before the intro of S4U, seteuid32() called lsaprivkeyauth(), then
lsaauth(), then create_token(). Before the intro of Vista, the latter
would have called NtCreateToken().
NtCreateToken() would have failed w/ STATUS_PRIVILEGE_NOT_HELD for a
process w/o the proper privileges. In that case, calling seteuid32()
would have returned EPERM (as required).
Since the intro of Vista, and if the process had been started from an
UNelevated shell, create_token() does NOT reach NtCreateToken()!
As create_token() failed to properly set errno in that case, calling
seteuid32() would return errno as set by lsaauth(), i.e. EACCES, not
in agreement w/ Posix (a bug which was present for years).
(lsaauth() called LsaRegisterLogonProcess() which would fail)
If a FIFO is opened with O_RDWR access, create the pipe with
read/write access, and make the first client have the handle of that
pipe as its I/O handle.
Adjust fhandler_fifo::raw_read to account for the result of trying to
read from that client if there's no data.
fhandler_fifo::clone called fhandler_base::clone on each client
fhandler. But those fhandlers are actually fhandler_fifo objects, so
when fhandler_base::clone calls copyto, it's actually
fhandler_fifo::copyto that gets called. This can lead to mysterious
crashes.
Fix this by simply calling clone (which translates to
fhandler_fifo::clone) on each client fhandler.
Add static functions peek_fifo, thread_fifo, start_thread_fifo, and
fifo_cleanup to select.cc. These are based on the corresponding pipe
functions, the main difference being that peek_fifo loops through the
connected clients to see if any of them have data available for
reading.
Add the fhandler_fifo methods select_read, select_write, and
select_except.
Add accessor methods get_nclients, get_handle, and is_connected that
are needed by peek_fifo.
Add a hit_eof method that tries to detect whether any clients are
connected. Before concluding that there are none, it gives the
listen_client thread time to update the client data.
Introduce a 'fifo_client_handler' structure that can be used by a
reader to communicate with a writer using an instance of the named
pipe. An fhandler_fifo opened for reading creates a thread that does
the following:
- maintains a list of fifo_client_handlers
- listens for_clients trying to connect
- creates new pipe instances as needed so that there's always at
least one available for connecting.
The pipe instances are initially created in blocking mode, but they
are set to be non-blocking after a connection is made.
fhandler_fifo::raw_read now loops through the connected clients and
reads from the first one that has data available.
New fhandler_fifo methods: add_client, listen_client,
listen_client_thread, check_listen_client_thread.
Replace the create_pipe method by create_pipe_instance, which allows
unlimited pipe instances.
New helper functions: create_event, set_pipe_non_blocking.
Make fhandler_fifo a derived class of fhandler_base instead of
fhandler_base_overlapped.
Replace the create_pipe macro, which is based on
fhandler_pipe::create, by new create_pipe and open_pipe methods.
These use NT functions instead of Win32 functions. Replace fifo_name
by get_pipe_name, which returns a pointer to a UNICODE_STRING.
Remove the fnevent macro, which would now be needed only once.
Add a raw_write method, adapted from fhandler_base::raw_write.
Adapt all functions to the changes above.
Switching to Cywin-only PIDs introduced a new problem when collecting
Cygwin processes for `ps -W': A process can show up multiple times
again, if the Cygwin procinfo has been opened for a just execing
process. The execed process then shows up twice, once as Cygwin
process, but with the wrong Windows PID of the execing process,
once as Windows-only process.
The mechanism used to exclude these stray processes didn't work with
the new Cygwin pid handling anymore. To fix this
* check if the incoming Windows PID is the same as the PID in the
procinfo. If not, we have the PID of the execing process while
procinfo was already changed,
* always check if the process has already been handled, not only
for processes we got a procinfo for,
* simplify adding pid to pidlist since pid is now always correct.
While at it, fix comments and comment formatting.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
strace only printed the Windows PID in event output so far.
Especially now that Windows and Cygwin PID are decoupled, the
strace user might like to see the Cygwin pid in event output as
well. However, at process startup, the process might not have
a Cygwin PID yet.
To mitigate this, always print the Windows PID and only add the
Cygwin pid if it exists.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
commit c0d7d3e1a2 removed the usage of the
LCMAP_BYTEREV flag in the call to LCMapStringW to workaround a strange
bug in LCMapStringW. This patch didn't take a userspace call of
wcsxfrm{_l} with NULL buffer and 0 size to evaluate the required buffer
size into account. This introduced a crash trying to byte swap the
NULL buffer. This patch fixes that problem.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
3.0.0 changed uname but missed to align /proc/version
which then used the old uname function on the new uname
struct.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Always use NtQuerySystemInformation(SystemProcessIdInformation).
This drops two code paths calling NtQueryInformationProcess or
GetModuleFileNameExW and only requires to open the process
to fetch system time info.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
There's a long-standing bug in ps -W. It only shows processes which ps
can open with PROCESS_QUERY_LIMITED_INFORMATION permissions. However,
that fails for a lot of system processes. Due to that, output is
basically restricted to processes in the same session, as well as Cygwin
processes... which isn't *quite* what ps -W was supposed to do.
Basically we only need to open the process to fetch the image name. If
that fails, utilize the undocumented SystemProcessIdInformation info
class introduced with Windows Vista, which allows to fetch the image
name by specifying the PID. Restructure the code a bit.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
When logging in via ssh with an unprivileged account,
PdhAddEnglishCounter returns with status 0x800007D0,
PDH_CSTATUS_NO_MACHINE. We didn't find any workaround
but the changes to improve debugging output may help
in future. Using UNICODE instead of ANSI functions is
a result of trying to fix this problem.
Also drop the prototype workaround for PdhAddEnglishCounterA.
It's not required anymore since Mingw-w64's pdh.h catched up.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Create process with standard rights, plus
PROCESS_QUERY_LIMITED_INFORMATION for authenticated users. This
allows to fetch basic process information and thus /proc/<PID>/stat
to succeed on foreign processes.
While at it, fix formatting in CreateProcess calls.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
There's no good reason to return blank if some of the info
couldn't be collected. Drop useless call collecting
SystemProcessorPerformanceInformation. Always return some
valid start_time, even if we couldn't collect ProcessTimes.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The OpenProcess call to generate /proc/<PID>/stat info requests
PROCESS_VM_READ, but that's not required. Drop it.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Creating /proc/<PID>/cmdline requires permissions to communicate
with the target process via its signal pipe. If that fails, the
output is "<defunct>" which doesn't make sense most of the time.
Rather, call format_process_exename in this case to get more useful
process name info, albeit not the full cmdline.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The winpid symlinks got created with no query permissions, so
only admins could see all Cygwin processes. Create symlinks
so everyone has query permissions instead.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Canceling the timer thread runs under lock. The thread uses the same
lock to guard its timer_tracker struct access. If the timing is bad,
timer_settime or timer_delete grab the lock at the same time, the timer
expires. In the end, cancel waits for the thread sync while the thread
waits for ther lock to be released.
Fix this by not waiting for the thread sync under lock.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
On setting the timer, the thread is accidentally only canceled when
disarming the timer. This leaks one thread per timer_settimer call.
Move the thread cancellation where it belongs.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
We don't support setting groups via /etc/groups anymore. Also, the
initgroups group list is created via S4U, so we have "Interactive" vs.
"Network" token, an artificial and entirely irrelevant difference.
So, "verifying" the lsaprivkeyauth token may lead to rejecting a prefectly
valid token. Just remove the verify_token call.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Revert "Cywin: user profile: unload impersonation user profile on exit"
Revert "Cygwin: seteuid: allow inheriting impersonation user profile handle"
Revert "Cygwin: user profile: add debug output to unload_user_profile"
Revert "Cygwin: user profile: Make an effort to unload unused user profiles"
This reverts commit bcb33dc4f0.
This reverts commit dd3730ed9c.
This reverts commit 8eee25241e.
This reverts commit 71b8777a71.
This patchset actually results in the following problem:
- After a couple of ssh logon/logoff attempts, an interactive session
of the same user loging in, is broken.
Apparently UnloadUserProfile manages to unload the user's profile
even while a parallel interactive session still uses the user's
profile.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Per MSDN VirtualQueryEx requires PROCESS_QUERY_INFORMATION.
Testing showed that PROCESS_QUERY_LIMITED_INFORMATION is sufficient
since Windows 8.1. The assumption that Windows 8 is the same as
Windows 8 was not correct, it requires PROCESS_QUERY_INFORMATION
as well.
Fix that by splitting the Windows 8 wincaps into one for Windows 8
and one for Windows 8.1. Set needs_query_information for Windows 8.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
If the user domain is the primary domain, LDAP is supposed to
use the default naming context. This is accomplished by setting
domain name to NULL in the call to cyg_ldap::fetch_ad_account.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
cyg_ldap::fetch_ad_account creates a naming context from the
incoming domain, if it's not NULL. The algorithm overwrites
dots with \0 in domain while creating the naming context, but
neglects to restore the dots.
Fix that by never overwriting the incoming domain name.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- feenableexcept,fedisableexcept, fegetexcept are GNU-only
- fegetprec, fesetprec are Solaris, use __MISC_VISIBLE
- _feinitialise is Cygwin-internal only
- Replace self-named FP precision values to values from
http://www.open-std.org/jtc1/sc22//WG14/www/docs/n752.htm
as used by Solaris.
- Change return value of fesetprec to adhere to the above document
and Solaris.
- Document fegetprec, fesetprec as Solaris functions, not as GNU
functions
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
...before calling any of its method. It's no safe bet that
it's already initialized when calling s4uauth and adding it
to load_user_profile certainly doesn't hurt.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
In case of a local machine account login, pi.lpProfilePath points
to the buffer returned by NetUserGetInfo, but NetApiBufferFree
is called prior to calling LoadUserProfileW. Fix by copying over
usri3_profile to the local userpath buffer, just as in the AD case.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
This never really worked. While at it, restructure code to
do common stuff only in one spot. Improve debug output.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Inspecting the content of case-sensitive directories
on remote machines results in lots of errors like
disappearing diretories and files, file not found, etc.
This is not feasible as default behaviour
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
A sleep is required on Windows 10 64 bit only before calling
RegisterClassW in the timerfd thread, and only when running
under strace. One of the child processes inheriting the timerfd
descriptor will get a STATUS_FLOAT_INEXACT_RESULT exception inside
of msvcrt.dll. It's apparently some timing problem. It occurs
in 4 out of 5 runs under strace only. WOW64 and Windows 7 64 bit
don't have this problem.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The share section was created using the PAGE_SIZE constant,
but PAGE_SIZE is 64K. Fix that by using wincap.page_size()
instead, which returns the desired actual page size of 4K.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
timerfd_tracker and timerfd_shared classes:
- Just because handles are shared, we don't have to store them in
shared memory. Move share handles into timerfd_tracker class.
- Drop shared instance counter since it's not required anymore.
timerfd_shared only stores the actual timer data.
- Drop timerfd_shared::create, just set clock id.
- Drop timerfd_shared::dtor, it's not required anymore.
- Drop timerfd_tracker::close, just call dtor where required.
- Rename timerfd_tracker::increment_instances to timerfd_tracker::dup.
It's the only reason it exists...
- timerfd_tracker::dtor now checks the non-shared pointers for NULL
before attempting to close them.
- timerfd_tracker::dtor handles decrementing the local instance count
by itself.
- Add a method timerfd_tracker::init_fixup_after_fork_exec to set
non-shared pointers to NULL. Together with the dtor patches it
fixes a problem with close_on_exec timerfd descriptors.
- Fix a bug in handling the thread synchronization event. It's
actually nice to create it before using it...
- Drop using sec_none{_nih} in InitializeObjectAttributes. It's
an unnecessary roundabout route just to get a NULL pointer.
- Slightly rework timechange window handling.
- Add more comments to explain what happens.
fhandler_timerfd:
- Drop cnew macro, it just hides what happens.
- fhandler_timerfd::fixup_after_exec now calls
timerfd_tracker::init_fixup_after_fork_exec first, so a subsequent
call to timerfd_tracker::dtor only works on valid handles.
- fhandler_timerfd::close directly calls timerfd_tracker::dtor now.
- Drop dtor call in fhandler_timerfd destructor.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
timerfd_tracker::fixup_after_fork_exec always tries to restore
the shared timer region at the same address as in the parent.
This is entirely unnecessary and wasn't intended, rather some
kind of copy/paste thinko. Fix that. Print NtMapViewOfSection
status code in api_fatal on failure for debugging.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The "optimized" condition to recognize an unarmed timer was plain
wrong. Replace it by checking the stored it_value against 0.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The child process needs access to the handle to be able to
unload it when switching user context.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Does this work? There's not much feedback given.
TODO: We might want to try unloading the user profile at process
exit as well, FWIW.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
curr_primary_token is either NO_IMPERSONATION or the external_token
or the internal_token, so it's never required to be closed by itself.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Commit 649911fb40 avoids the
calls to NetUserGetGroups and NetUserGetLocalGroups since
these can take a lot of time. The same problem potentially
occurs when loading the user profile. The code fetches
the roaming profile path calling NetUserGetInfo, which also
can be rather slow.
To avoid this problem, fetch the profile patch using LDAP.
Also, don't bail out early if the user's registry hive already
exists. This may result in outdated information.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
NetUserGetGroups and NetUserGetLocalGroups sometimes take a lot of time
(up to more than 2 mins) for no apparent reason.
Call s4uauth to generate an identification token for the user and fetch
the group list from there. This is *much* faster.
Keep the old code only for the sake of WOW64 on Vista and Windows 7,
which don't implement MsV1_0S4ULogon.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
s4uath was only callable to create an impersonation token so
far. Rework the function to allow creating an identification
token for informational purposes even from untrusted processes.
Take domainname and username instead of a passwd pointer to be
more multi-purpose.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Commit 4e34a39b5c made sure all user and
group names are case-correct, but it introduced a hefty performance hit
on starting the first Cygwin process.
Adding an ldap call for each AD group in a user token takes its toll in
bigger AD environments with lots of groups in a user token. Real-life
example: 300 groups w/ roundtrip time to the LDAP server of 0.25 secs
per call...
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Up to Vista CreateProcessAsUser only worked with primary tokens,
so convert S4U impersonation token to primary token. MSDN still
documents it that way, but actually an impersonation token is
sufficient since Windows 7.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Under WOW64 on 64 bit Windows 7, MsV1_0S4ULogon appears to be
unimplemented, probably under Vista as well. Re-enable
create_token method, to allow basic seteuid on W7 WOW64 and
Vista as well.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
for domain accounts we try KerbS4ULogon first, MsV1_0S4ULogon
second. But we only fetch the package id for the supporting
authentication package (Kerberos/MsV1_0) once at the start.
Duplicate LsaLookupAuthenticationPackage call and move into the
Kerb/MsV1_0 branches so that it fetches the correct package id
for the method we call next.
Curious enough this worked before. Apparently both methods
work with the MICROSOFT_KERBEROS_NAME_A package id. However,
requesting and using the right authentication package id is
the prudent thing to do.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
This reverts commit 7c34811440.
This potentially allows to circumvent OpenSSHs user/group name matching,
unless the Admin knows to add every local user twice or to use patterns,
e.g.:
Match user MACHINE+user,.+user
Match user *+user
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Commit c1023ee353 changed the way
path_conv::binmode() works. Rather than returning three states,
O_BINARY, O_TEXT, 0, it only returned 2 states, O_BINARY, O_TEXT. Since
mounts are only binary if they are explicitely mounted binary by setting
the MOUNT_BINARY flag, textmode is default.
This introduced a new bug. When inheriting stdio HANDLEs from native
Windows processes, the fhandler and its path_conv are created from a
device struct only. None of the path or mount flags get set this way.
So the mount flags are 0 and path_conv::binmode() returned 0.
After the path_conv::binmode() change it returned O_TEXT since, as
explained above, the default mount mode is textmode.
Rather than just enforcing binary mode for path_conv's created from
device structs, this patch changes the default mount mode to binary:
Replace MOUNT_BINARY flag with MOUNT_TEXT flag with opposite meaning.
Drop all explicit setting of MOUNT_BINARY. Drop local set_flags
function, it doesn't add any value.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
When recognizing a negative pid, optind is off by one. The
code correcting this has been erroneously removed by commit
8de660271f. Revert that.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The solution from commit 9a3cc77b2a
didn't work for foreign domain accounts. Rather than calling
LookupAccountSid we now use the info when we fetch it anyway
via LDAP or Net*GetInfo. Only in case of domain groups we have
to add an LDAP call explicitly.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Make sure a domain+username fits into the local name buffer.
The former buffer size didn't take adding a domain name to
a really_really_long_user_name into account.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
When looking up valid accounts by name, LookupAccountName returns
a SID and a case-correct domain name. However, the name was input
and LookupAccountName is case-insensitive, so the name is not
necessarily written the same way as in SAM or AD.
Fix that by doing a reverse lookup on the just fetched SID. This
fetches the account name in the correct case. Override the
incoming name with the case correct name from LookupAccountSid.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
This is a really old and crappy API, as the previous commit shows.
Use NtQueryInformationFile(FilePositionInformation) here instead.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
dtable::set_file_pointers_for_exec is called from
child_info_spawn::worker to move the file position of O_APPEND
files to EOF if the child is a native child.
However, this only works correctly for the first O_APPEND
file descriptor:
- set_file_pointers_for_exec calls SetFilePointer. The higher
4 bytes of the desired file offset are given to SetFilePointer
as pointer to a DWORD value. On return, SetFilePointer returns
the higher 4 bytes of the new file position in this DWORD.
- So for the second and subsequent descriptors the higher 4 byte
of the file position depend on what the actual file position
of the previous file has been set to:
- If the file is > 2 Gigs, the high offset will not be 0 anymore.
- If the desciptor points to a non-seekable file (i.e., a pipe
or socket), SetFilePosition returns an error and sets the high
position to -1.
Fix this by calling SetFilePointerEx instead, which does not
modify the incoming position value.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
When calling spawnve, in contrast to execve, the parent has
to create the pid for the child. With the old technique
this was simply the Windows pid, but now we have to inform
the child about its new pid.
Add a cygpid member to class child_info_spawn. Set it in
child_info_spawn::worker, just prior to calling CreateProcess
rather than afterwards. Overwrite cygheap->pid in
child_info_spawn::handle_spawn before calling pinfo::thisproc.
Make sure pinfo::thisproc knows the pid is already set by
setting the handle argument to INVALID_HANDLE_VALUE.
Also set procinfo->dwProcessId to myself_initial.dwProcessId
instead of to myself_initial.pid for clarity.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
When the current process has renamed (to bin) a readonly dll, we get
STATUS_TRANSACTION_NOT_ACTIVE for unknown reason when subsequently
creating the forkable hardlink. A workaround is to open the original
file with FILE_WRITE_ATTRIBUTES access, but that fails with permission
denied for users not owning the original file.
* forkable.cc (dll::create_forkable): Retry hardlink creation using the
original file's handle opened with FILE_WRITE_ATTRIBUTES access when the
first attempt fails with STATUS_TRANSACTION_NOT_ACTIVE.
* Rename cygwin_shared->prefer_forkable_hardlinks to
forkable_hardlink_support, with values
0 for Unknown, 1 for Supported, -1 for Unsupported.
Upon first dll loaded ever, dll_list::forkable_ntnamesize checks the
/var/run/cygfork directory to both exist and reside on NTFS, setting
cygwin_shared->forkable_hardlink_support accordingly.
* Replace enum forkables_needs by bool forkables_created: Set
to True by request_forkables after creating forkable hardlinks.
To avoid the need for each process to check the filesystem to detect
that hardlink creation is impossible or disabled, cache this fact in
shared memory. Removing cygfork directory while in use does disable
hardlinks creation. To (re-)enable hardlinks creation, the cygfork
directory has to exist before the first cygwin process does fork.
* forkable.cc (dll_list::forkable_ntnamesize): Short cut
forkables needs to impossible when disabled via shared memory.
(dll_list::update_forkables_needs): When detecting hardlink
creation as impossible (not on NTFS) while still (we are the
first one checking) enabled via shared memory, disable the
shared memory value.
(dll_list::request_forkables): Disable the shared memory value
when hardlinks creation became disabled, that is when the
cygfork directory was removed.
* include/cygwin/version.h: Bump CYGWIN_VERSION_SHARED_DATA 6.
* shared_info.h (struct shared_info): Add member
prefer_forkable_hardlinks. Update CURR_SHARED_MAGIC.
* shared.cc (shared_info::initialize): Initialize
prefer_forkable_hardlinks to 1 (Yes).
To support in-cygwin package managers, the fork() implementation must
not rely on .exe and .dll files to stay in their original location, as
the package manager's job is to replace these files. Instead, when the
first fork try fails, and we have NTFS, we use hardlinks to the original
binaries in /var/run/cygfork/ to create the child process during the
second fork try, along the main.exe.local file to enable the "DotLocal
Dll Redirection" feature for the dlls.
The (probably few) users that need an update-safe fork manually have to
create the /var/run/cygfork/ directory for now, using:
mkdir --mode=a=rwxt /var/run/cygfork
* child_info.h: Bump CURR_CHILD_INFO_MAGIC.
(enum child_status): Add _CI_SILENTFAIL flag.
(struct child_info): Add silentfail setter and getter.
* winsup.h (child_copy): Add bool silentfail parameter.
* cygheap.cc: Pass silentfail parameter to child_copy.
* dcrt0.cc: Ditto.
* dll_init.h (struct dll): Define public inline method forkedntname.
(struct dll_list): Declare private method find_by_forkedntname.
* dll_init.cc (struct dll_list): Implement find_by_forkedntname.
(dll_list::alloc): Use find_by_forkedntname when in load after fork.
(dll_list::load_after_fork_impl): Load dlls using dll::forkedntname.
* fork.cc (frok::parent): Set silentfail child info flag. Pass
silentfail parameter to child_copy. Use forkedntname of
dlls.main_executable.
(fork): When first dofork run failed and did not use forkables,
run dofork again with_forkables set to true.
(child_copy): Use debug_printf if silentfail is true,
system_printf otherwise.
In preparation to protect fork() against dll- and exe-updates, create
hardlinks to the main executable and each loaded dll in subdirectories
of /var/run/cygfork/, if that one exists on the NTFS file system.
The directory names consist of the user sid, the main executable's NTFS
IndexNumber, and the most recent LastWriteTime of all involved binaries
(dlls and main executable). Next to the main.exe hardlink we create the
empty file main.exe.local to enable dll redirection.
The name of the mutex to synchronize hardlink creation/cleanup also is
assembled from these directory names, to allow for synchronized cleanup
of even orphaned hardlink directories.
The hardlink to each dynamically loaded dll goes into another directory,
named using the NTFS IndexNumber of the dll's original directory.
* Makefile.in (DLL_OFILES): Add forkable.o.
* dll_init.h (struct dll): Declare member variables fbi, fii,
forkable_ntname. Declare methods nominate_forkable,
create_forkable.
(struct dll_list): Declare enum forkables_needs. Declare member
variables forkables_dirx_size, forkables_dirx_ntname,
forkables_mutex_name, forkables_mutex. Declare private methods
forkable_ntnamesize, prepare_forkables_nomination,
update_forkables_needs, update_forkables, create_forkables,
denominate_forkables, close_mutex, try_remove_forkables,
set_forkables_inheritance, request_forkables. Declare public
static methods ntopenfile, read_fii, read_fbi. Declare public
methods release_forkables, cleanup_forkables. Define public
inline method setup_forkables.
* dll_init.cc (dll_list::alloc): Allocate memory to hold the
name of the hardlink in struct dll member forkable_ntname.
Initialize struct dll members fbi, fii.
(dll_list::load_after_fork): Call release_forkables method.
* fork.cc: Rename public fork function to static dofork, add
with_forkables as bool pointer parameter. Add new fork function
calling dofork. (struct frok): Add bool pointer member
with_forkables, add as constructor parameter.
(frok::parent): Call dlls.setup_forkables before CreateProcessW,
dlls.release_forkables afterwards.
* pinfo.cc (pinfo::exit): Call dlls.cleanup_forkables.
* syscalls.cc (_unlink_nt): Rename public unlink_nt function to
static _unlink_nt, with 'shareable' as additional argument.
(unlink_nt): New, wrap _unlink_nt for original behaviour.
(unlink_nt_shareable): New, wrap _unlink_nt to keep a binary
file still loadable while removing one of its hardlinks.
* forkable.cc: New file.
Implement static functions mkdirs, rmdirs, rmdirs_synchronized,
stat_real_file_once, format_IndexNumber, rootname, sidname,
exename, lwtimename. Define static array forkable_nameparts.
(struct dll): Implement nominate_forkable, create_forkable.
(struct dll_list): Implement static methods ntopenfile,
read_fii, read_fbi. Implement forkable_ntnamesize,
Even for the main executable and cygwin1.dll store the file name as full
NT path. Create the child process using the main executable's file name
converted from the full NT path stored before.
* dll_init.cc (dll_list::alloc): Search for DLL_SELF type entry
with module name like for DLL_LINK, use full NT path to search
for DLL_LOAD type only. For DLL_SELF type do not indicate
having a destructor to be called.
(dll_list::find): Ignore DLL_SELF type entries.
(dll_list::init): Ditto. Call track_self method.
(dll_list::track_self): New.
(dll_list::load_after_fork): Call track_self method.
* dll_init.h (enum dll_type): Add DLL_SELF, for the main
executable and cygwin1.dll.
(struct dll_list): Declare private method track_self. Declare
member variable main_executable.
* fork.cc (frok::parent): Use ntname from dlls.main_executable
to create child process, converted to short path using
dll_list::buffered_shortname.
Store loaded dll's file name as full NT path.
* dll_init.h (struct dll): Rename member variable name to ntname.
(struct dll_list): Declare private static member variable
nt_max_path_buffer. Declare public static methods form_ntname,
form_shortname. Define public static methods nt_max_path_buf,
buffered_shortname.
(dll_list::operator []): Use PCWCHAR rather than const PWCHAR.
(dll_list::find_by_modname): Ditto.
* dll_init.cc (in_load_after_fork): Define earlier in file.
(struct dll_list): Rename member variable name to ntname.
Define nt_max_path_buffer variable.
Implement static methods form_ntname, form_shortname.
(dll_list::operator []): Use PCWCHAR rather than const PWCHAR.
(dll_list::find_by_modname): Ditto.
(reserve_at): Ditto.
(release_at): Ditto.
(dll_list::alloc): Use nt_max_path_buf method instead of local
buffer. Store module file name as full NT path, convert using
the form_ntname static method.
(dll_list::load_after_fork): Call load_after_fork_impl only when
reload_on_fork is set.
* fork.cc (frok::child): Call dlls.load_after_fork even without
need to dynamically load dlls.
(frok::parent): Move syscall_printf into the retry loop.
Trying to delete in-use executables and DLLs using
FILE_DISPOSITION_POSIX_SEMANTICS returns STATUS_CANNOT_DELETE.
Fall back to the former method if that error occurs to allow
unlinking these files.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The symlink target of /proc/PID/fd files pointing to pipes and
sockets are just artificial filenames referencing the object using
some internal number. The pipe open code expects a path specifying
process pid and the internal number so it access the right process
and pipe.
- Set the posix path of the pipe to the simple pipe name only,
as it shows up in /proc/PID/fd. A /proc/self prefix is just
as wrong as a /dev/fd prefix.
- Revert thinko in fhandler_pipe::open expecting the name as
/proc/self/fd/... In fact this should never happen.
- Fix up the path before re-opening the pipe instead.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The reopen code neglected to pass along the requested open
mode correctly. This may end up reopening the file with
incorrect access mask, or duplicating the wrong pipe handle.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Move TerminateProcess call into cleanup code to make sure child
doesn't linger in some border cases.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
When fork finally fails although both CreateProcess and creating the
"cygpid.N" shared memory section succeeded, we have to release that
shared memory section as well - before releasing the process handle.
Otherways we leave an orphan "cygpid.N" shared memory section, and any
subsequent cygwin process receiving the same PID fails to initialize.
* fork.cc (frok::parent): Call child.allow_remove in cleanup code.
- If the execve'ed process is a non-Cygwin process, we have to
create the matching winpid symlink and remove the old one
ourselves.
- If we spawn a child, the winpid symlink has to be maintained
by the child process, otherwise it disappears if the parent
process exits.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The arguments are not used anyway, so drop them. When called,
procinfo->dwProcessId is already set right, so we don't have
to access myself_initial.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
This may end up killing the wrong process. Only allow Cygwin PID.
Slightly clean up code: Remove outdated W95 considerations. Fix
a bug in commandline argument processing.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Since commit b5e1003722, native
Windows processes not started by Cygwin processes don't have a
Cygwin PID anymore. This breaks ps -W and kill -f <WINPID>.
Introduce MAX_PID (65536 for now).
Cygwin processes as well as native Windows processes started
from a Cygwin process get a PID < MAX_PID. All other native
Windows processes get a faked Cygwin PID >= MAX_PID.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Using the Windows PID as Cygwin PID has a few drawbacks:
- the PIDs on Windows get reused quickly. Some POSIX applications choke
on that, so we need extra code to avoid too quick PID reuse.
- The code to avoid PID reuse keeps parent process handles and
(depending on a build option) child processes open unnecessarily.
- After an execve, the process has a split personality: Its Windows PID
is a new PID, while its Cygwin PID is the PID of the execve caller
process. This requires to keep two procinfo shared sections open, the
second just to redirect process info requests to the first, correct
one.
This patch changes the way Cygwin PIDs are generated:
- Cygwin PIDs are generated independently of the Windows PID, in a way
expected by POSIX processes. The PIDs are created incrementally in
the range between 2 and 65535, round-robin.
- On startup of the first Cygwin process, choose a semi-random start PID
for the first process in the lower PID range to make the PIDs slightly
unpredictable. This may not be necessary but it seems kind of inviting
to know that the first Cygwin process always starts with PID 2.
- Every process not only creates the shared procinfo section, but also a
symlink in the NT namespace, symlinking the Windows PID to the Cygwin
PID. This drops the need for the extra procinfo section after execve.
- Don't keep other process handles around unnecessarily.
- Simplify the code creating/opening the shared procinfo section and
make a clear distinction between interfaces getting a Cygwin PID and
interfaces getting a Windows PID.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
If a process is just exiting, requesting memory info may fail
with STATUS_PROCESS_IS_TERMINATING. Right now the code just bails
out if fetching mem info fails. However, the rest of the info is
still valuable for procps, so just carry on.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
After creating a pthread, the stack gets moved to the desired memory
location. While the 32 bit thread wrapper copies the exception handler
information to the new stack (so we have at least *some* exception
handler present), the x86_64 code didn't perform any exception handler
magic. Fix that.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
VirtualQueryEx, called by fixup_mmaps_after_fork, requires
PROCESS_QUERY_INFORMATION permissions per MSDN. However, testing
shows that PROCESS_QUERY_LIMITED_INFORMATION is sufficient when
running the same code on Windows 8.1 or Windows 10. Fix the code
to give the forked child always PROCESS_QUERY_INFORMATION perms
on Windows Vista/7 and respective server releases.
Revert now unneeded patch to check_token_membership as well.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
POSIX requires that raise(3) is equivalent to
pthread_kill(pthread_self(), sig);
in multi-threaded applications. Our raise just called kill(sig).
Fix that.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Keeping an inheritable handle open results in that handle being
spilled over into grandchild processes, which is not desired.
Duplicate original parent handle into a non-inheritable one with
minimal SYNCHRONIZE permissions and close the original handle.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- Exec'ed/spawned processes don't need PROCESS_DUP_HANDLE. Remove that
permission from the parent handle.
- PROCESS_QUERY_LIMITED_INFORMATION doesn't work for Windows 7 if the
process is started as a service. Add PROCESS_QUERY_INFORMATION for
pre-Windows 8 in that case.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The version info only depends on the object files. This results
in the version info not being rebuild immediately if a source
file is changed. Rather, the version info is only rebuilt on the
next make run.
Fix that by making the version info build rule dependent on the
source files.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- This simple and official method replaces cyglsa and "create token"
methods. No network share access, same as before.
- lsaauth and create_token are disabled now. If problems crop up,
they can be easily reactivated. If no problems crop up, they
can be removed in a while, together with the lsaauth subdir.
- Bump Cygwin version to 3.0.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The previous patch failed with password-less auth because in
that case the return code from get_server_groups wasn't tested.
Fix that. Also make sure that get_server_groups does not
check if the account is disabled or locked out when just fetching
the group list for initgroups or getgrouplist.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
So far seteuid could change uid to any existing account, given
sufficient permissions of the caller. This is kind of bad since
it disallows admins to refuse login to disabled or locked out
accounts.
Add check for the account's UF_ACCOUNTDISABLE or UF_LOCKOUT flags
and don't let the user in, if one of the flags is set.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Use info from same source (GetNetworkParams).
Also move getdomainname near gethostname in source.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
If gethostname() fails we call GetComputerNameEx with
ComputerNameDnsFullyQualified. This is wrong, gethostname should return
the hostname only, not the FQDN. Fix this by calling GetComputerNameEx
with ComputerNameDnsHostname.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
When reusing a cygthread, the stub method fails to set the thread name
to the new name. The name is only set when actually creating the
thread. Fix that by moving the SetThreadName call right in front of the
thread function call.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Combine with a bit of cleanup:
- Drop overrun_event_running in favor of overrun_count being -1.
- Fix include guard in posix_timer.h.
- Drop ununsed function timespec_to_us.
- Don't use Interlocked functions without need.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Corinna Vinschen
Erik M. Bray
Ken Brown
Michael Haubenwallner
Takashi Yano
J.H. van de Water
Brian Inglis
Yaakov Selkowitz
Jozef Lawrynowicz