try IOCTL_DISK_GET_DRIVE_GEOMETRY_EX and
IOCTL_DISK_GET_PARTITION_INFO_EX ioctls first, to allow access to GPT
partitioned disks. Fall back to old non-EX ioctls otherwise.
Add comment to explain NT4 weirdness.
drive_size, current_position and bytes_per_sector.
(fhandler_dev_floppy::get_drive_info): Declare.
* fhandler_floppy.cc (fhandler_dev_floppy::is_eom): Define ERROR_SEEK
and ERROR_SECTOR_NOT_FOUND as end-of-medium conditions.
(fhandler_dev_floppy::get_drive_info): New method to have one function
retrieving drive info.
(fhandler_dev_floppy::open): Call get_drive_info to get drive
information right from the start.
(fhandler_dev_floppy::lseek): Use and set drive information members.
Especially keep track of current_position.
(fhandler_dev_floppy::ioctl): Ditto.
* fhandler_raw.cc (fhandler_dev_raw::write_file): Keep track of
current_position.
(fhandler_dev_raw::read_file): Ditto.
(fhandler_dev_raw::raw_read): Never try to read beyond end-of-medium.
(fhandler_dev_raw::dup): Handle new drive information members.
be overridden.
* exceptions.cc (_cygtls::call_signal_handler): Call signal handler with extra
siginfo_t * and void * parameters when SA_SIGINFO flag is set.
* signal.cc (signal): Clear SA_SIGINFO flag.
(sigqueue): Fix incorrect setting of si_code.
* sigproc.cc (signal_fixup_after_exec): Clear SA_SIGINFO flag when setting
handler to SIG_DFL.
* faq.xml: Remove copyright section, link to license.html
* faq-sections.xml: Remove copyright section, link to license.html
* faq-programming.xml: Remove confusing reference to Red Hat.
* faq-what.xml: Reword "supported" FAQ.
* exceptions.cc (sigpacket::process): Eliminate return after call to reinstated
noreturn function.
(signal_exit): Allow function to exit when a captive process has been
terminated.
* pinfo.cc (pinfo::exit): Enter exit_lock here. Once again exit here under
control of exit_lock.
* sigproc.cc (sig_send): Don't wait for completion if process is exiting.
Remove special __SIGEXIT accommodations.
(wait_sig): Just exit the thread when a __SIGEXIT has been detected. Don't
exit the process.
* sigproc.h (struct sipacket::thread_handle): Put thread_handle here.
* sigproc.cc (sigproc_terminate): Move setting of thread_handle...
(sig_send): ...to here. Put it in packet being sent. Only close pack.wakeup
when we're waiting for completion.
(wait_sig): Use thread_handle directly from received packet.
* cygtls.h (struct _cygtls::thread_handle): New field.
* dcrt0.cc (exit_lock): Remove declaration.
* winsup.h (exit_lock): Add declaration.
* exceptions.cc (sigpacket::process): Properly return after signal_exit.
* pinfo.cc (pinfo::exit): Only exit the process if _my_tls.thread_handle has
not been filled out -- which should be an impossible event.
* sigproc.cc (sigproc_terminate): Fillout _my_tls.thread_handle to provide
something for wait_sig to wait for. Use the siginfo_t version of sig_send and
fill out the tls argument with _my_tls.
(wait_sig): Wait for the thread specified in pack.tls or (for now) complain
bitterly if it doesn't exit.
file attributes argument.
* fhandler_disk_file.cc (fhandler_base::fstat_by_handle): Use
file attributes evaluated from NtQueryFileInformation or
FileInformationByHandle in call to fstat_helper.
Set pc.fileattr from just evaluated file attributes here.
(fhandler_base::fstat_by_name): Use file attributes evaluated from
FindFileFirst or default attribute in call to fstat_helper.
Set pc.fileattr from just evaluated file attributes here.
(fhandler_base::fstat_helper): Use file attributes given as argument,
not file attributes stored in this fhandler, since this information
is potentially wrong. Add comment to explain this.
* path.h (has_attribute): New global inline function.
(path_conv::set_attributes): New method to change fileattr.
* mkgroup.c (print_win_error): Create macro calling ...
(_print_win_error): ... this function created from former
print_win_error. Move up in source.
(PDOMAIN_CONTROLLER_INFOW): Define return type of DcGetDcNameW.
(dsgetdcname): New function pointer for DcGetDcNameW.
(load_netapi): Get DcGetDcNameW address.
(main): If DcGetDcNameW is available, use it.
* mkpasswd.c (PDOMAIN_CONTROLLER_INFOW): Define return type of
DcGetDcNameW.
(dsgetdcname): New function pointer for DcGetDcNameW.
(load_netapi): Get DcGetDcNameW address.
(main): If DcGetDcNameW is available, use it. Rename local variable
domain_name_specified to domain_specified as in mkgroup.c.
pinfo::exit.
* pinfo.cc (pinfo::exit): Move sigproc_terminate later so that signals can be
processed while waiting for hExeced child.
(pinfo::maybe_set_exit_code_from_windows): Set exit code from sigExeced if it
is non-zero. Set exit_state to ES_EXEC_EXIT prior to waiting for captive
process exit code.
* exceptions.cc (sigExeced): New global variable.
(signal_exit): Remove noreturn attribute from declaration.
(signal_exit): Just terminate captive process and return if hExeced on the
theory that the exit will be subsequently handled in the main thread.
* sigproc.cc (sigproc_terminate): Eliminate test for ES_SIGPROCTERMINATE and
use ES_FINAL instead.
(sig_send): Use no_signals_available instead of duplicate test.
* winsup.h (ES_EXEC_EXIT): New enum.
(ES_SIGPROCTERMINATE): Delete.
(EXITCODE_NOSET): Ditto.
* sigproc.cc (no_signals_available): Remove check for hwait_sig. Just rely on
my_sendsig. Pass in an argument controlling when it is appropriate to test
EXITCODE_SET.
(proc_can_be_signalled): Remove checks for myself since this function is never
called in that context.
(sigproc_init): Pre-initialize my_sendsig to non-zero so that
proc_can_be_signalled will know that we expect to be signalable soon.
(sig_send): Change debugging output.
signal thread.
(wait_sig): Correct so that WaitForSingleObject is called when hMainThread is
!= 0, rather than the reverse.
* cygheap.cc (cygheap_fixup_in_child): Clarify potential error message.
* fork.cc (fork_copy): Cosmetic change.
called, since that is the intent of sending a __SIGEXIT. Wait forever for main
thread to go away since, presumably, the main thread told us it was going away.
(av::av): Remove reference to error.
(av::replace0_maybe): Ditto.
(av::dup_maybe): Ditto.
(av::dup_all): Ditto.
(av::unshift): Ditto.
(spawn_guts): On a fault, return E2BIG only if ENOMEM has been set. Otherwise
return EFAULT.
(cygtls::andreas): New element. Replaces _myfault and _myfault_errno.
(cygtls::fault_guarded): Use andreas.
(cygtls::return_from_fault): Ditto.
(cygtls::setup_fault): Add a parameter denoting where to store old fault
handler, if any and use it to "stack" faults.
(cygtls::reset_fault): Restore fault from parameter.
(myfault::sebastian): New variable.
(myfault::~myfault): Pass sebastian to reset_fault.
(myfault::myfault): Store old fault values in sebastian.
(handle_exceptions): Use _sig_tls rather than sigtid to determine if this is
the signal thread.
(set_signal_mask): Ditto for conditionalized CGF code.
* pinfo.cc (pinfo::exit): Exit the thread if we forcefully terminated the main
thread
* sigproc.cc (sigtid): Delete.
(_sig_tls): Define.
(sig_clear): Use _sig_tls rather than sigtid to determine if this is the signal
thread.
(sig_dispatch_pending): Ditto.
(wait_sig): Set _sig_tls here.
* dcrt0.cc (do_exit): Move sigproc_terminate call later since signal handling
was still needed for subsequent stuff. Call sigproc_terminate with new
exit_state value.
* pinfo.cc (pinfo::exit): Call sigproc_terminate with new exit_state value.
* sigproc.cc (proc_terminate): Remove unnecessary (void) parameter.
(sigproc_terminate): Ditto. Add new argument to accept exit state to be set.
(wait_sig): Reorganize __SIGEXIT handling. Add more debugging output.
* winsup.h (sigproc_terminate): Declare with new exit_state argument.
(exit_states): Reorganize to reflect new exit ordering of sigproc_terminate.
appropriately.
* pinfo.cc (pinfo::exit): Always call sigproc_terminate here. Rely on
sigproc_terminate to signal signal thread to handle eventual process exit.
* sigproc.cc (no_signals_available): Change criteria for determining if this
process can handle signals to itself.
(my_sendsig): New variable. Copy of my sendsig handle.
(proc_can_be_signalled): Don't send signals if exit code is set.
(sigproc_terminate): Use and set exit_state appropriately to determine when to
do anything. Send __SIGEXIT to self to control process exit.
(sig_send): Use my_sendsig for sending signals. Don't call
proc_can_be_signalled for myself since the criteria is now different for
sending signals to myself.
(wait_sig): Copy myself->sendsig to my_sendsig for future use. Exit signal
loop when __SIGEXIT is received. Wait for main thread to exit and use its exit
status to actually exit process.
* sigproc.h (__SIGEXIT): New enum.
* dcrt0.cc (alloc_stack): Eliminate superfluous "return;".
* debug.cc (add_handle): Ditto.
* devices.in (device::parse): Ditto.
* dtable.cc (dtable::vfork_parent_restore): Ditto.
(dtable::vfork_child_fixup): Ditto.
* environ.cc (parse_options): Ditto.
* errno.cc (seterrno_from_win_error): Ditto.
* exceptions.cc (sig_handle_tty_stop): Ditto.
(set_signal_mask): Ditto.
* fhandler.cc (fhandler_base::read): Ditto.
(fhandler_base::operator delete): Ditto.
(fhandler_base::seekdir): Ditto.
(fhandler_base::rewinddir): Ditto.
* fhandler_console.cc (fhandler_console::read): Ditto.
(fhandler_console::fixup_after_exec): Ditto.
* sigproc.cc (sigproc_init): Ditto.
(sigproc_terminate): Ditto.
* devices.cc: Regenerate.
heap. Change fatal error to avoid confusion with cygheap.
* spawn.cc (linebuf::finish): New function.
(linebuf::add): Cosmetic change.
(spawn_guts): Only avoid building windows command line if the program being
executed was actually mounted with -X. Don't return E2BIG if we hit the 32K
size and we're executing a detected cygwin program. Just silently truncate the
windows command line, instead.
(print_version): Ditto.
(cmd_list): Don't depend on terminating '\0' being present on
string-values.
(cmd_get): Don't attempt to read more than present, but keep
extra space for terminating '\0'. Really output REG_BINARY.
Don't leak memory.
(cmd_set): Include trailing '\0' in string's length.
warning.
* path.h (path_conv::set_cygexec): New function.
* spawn.cc (av::iscygwin): Eliminate.
(av::av): Don't initialize iscygwin.
(spawn_guts): Just use real_path.iscygexec for all tests.
(av::fixup): Short circuit test if .exe extension and known cygexec. Set
cygexec flag appropriately if we find that program uses cygwin1.dll.
(dll_crt0_0): Move console initialization earlier.
* init.cc (dll_entry): Move console initialization here.
* exceptions.cc (init_console_handler): Fully remove any old console handler.
* spawn.cc (spawn_guts): Don't fill out windows argv if we've deduced that this
is a cygwin-using program.
(av::fixup): Always check executables to see if they are using cygwin1.dll.
Don't consider .com files to be scripts.
* hookapi.cc (rvadelta): New function.
(PEHeaderFromHModule): Simplify slightly.
(hook_or_detect_cygwin): Use passed in name argument for "HMODULE" rather than
incorrectly reading current program. Calculate delta needed to read image data
and file names if this isn't a real "HMODULE".
* fork.cc (fork_parent): Don't issue errors if "somebody" has set the
PID_EXITED flag on a child. Don't close process handle if it has potentially
already been closed.
* pinfo.cc (winpids::add): Eliminate PID_ALLPIDS handling which was obsoleted
by previous changes.
* spawn.cc (av::fixup): Do win16 detection for .com files. Make sure that
buffer has been unmapped in all cases.
(_cygtls::return_from_fault): Use __ljfault.
* exceptions.cc (set_signal_mask): Revert previous checkin.
* gendef (__sjfault): Split out into a separate function which doesn't bother
with any special signal locking. routines.
(_ljfault): Return from a __sjfault without bothering with signals.
* Makefile.in: Remove extra anchor to make NN4 happy.
* faq.xml: Link to cygwin.com/license.html
* faq-resources.xml: Link instead of duplicating info.
* faq-using.xml: Split out services and network shares FAQ.
* faq-what.xml: Link to cygwin.com/license.html
intact throughout.
(normalize_win32_path): Revert to only checking for slash.
(realpath): Convert drive letters to cygdrive paths before
doing anything else.
* shared_info.h (mount_info::cygdrive_posix_path): Make public.
in favor of calling path_conv with PC_POSIX flag. Align error
handling closer to POSIX. As on Linux, return user space allocated
memory if second parameter is NULL.
thread.
(sigpacket:process): Simplify logic which determines when and how a signal is
masked. Don't trigger sigwait if there is a signal handler.
* sigproc.cc (wait_sig): Update comment. Try to process a signal which is in
the queue if it isn't queued for the target thread (this is still not right).
Corinna Vinschen
Christopher Faylor
Joshua Daniel Franklin
Danny Smith
Chris Sutcliffe
Dimitri Papadopoulos