Add a _REENT_ERRNO() macro to encapsulate the access to the
_errno member of struct reent. This will help to replace the
structure member with a thread-local storage object in a follow
up patch.
Replace uses of __errno_r() with _REENT_ERRNO(). Keep __errno_r() macro for
potential users outside of Newlib.
These have no effect on x86_64. Retain a few occurrences of __cdecl
in files imported from other sources.
Also retain all occurrences of WINAPI, even though the latter is
simply a macro that expands to __stdcall. Most of these occurrences
are associated with Windows API functions, and removing them might
make the code confusing instead of simpler.
- Move definition of windows to POSIX error mapping struct into
cygerrno.h
- Move declaration of winsock errno functions to cygerrno.h
- Input to error mapping functions is DWORD
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
We use errno AKA _REENT->_errno since the last century and only set
_impure_ptr->_errno for backward compat. Stop that. Also, remove
the last check for _impure_ptr->_errno in Cygwin code.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Bump GPLv2+ to GPLv3+ for some files, clarify BSD 2-clause.
Everything else stays under GPLv3+.
New Linking Exception exempts resulting executables from LGPLv3 section 4.
Add CONTRIBUTORS file to keep track of licensing.
Remove 'Copyright Red Hat Inc' comments.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
(mainly in fhandler*) start fixing gcc 4.7.2 mismatch between regparm
definitions and declarations.
* gendef: Define some functions to take @ declaration to accommodate _regN
defines which use __stdcall.
* gentls_offsets: Define __regN macros as empty.
* autoload.cc (wsock_init): Remove unneeded regparm attribute.
* winsup.h (__reg1): Define.
(__reg2): Define.
(__reg3): Define.
* advapi32.cc (DuplicateTokenEx): Coerce some initializers to avoid warnings
from gcc 4.7.2.
* exceptions.cc (status_info): Declare struct to use NTSTATUS.
(cygwin_exception::dump_exception): Coerce e->ExceptionCode to NTSTATUS.
* fhandler_clipboard.cc (cygnativeformat): Redefine as UINT to avoid gcc 4.7.2
warnings.
(fhandler_dev_clipboard::read): Ditto.
some modifications.
* init.cc (dll_entry): Revert previous change.
* miscfuncs.cc: Include sigproc.h for exit_thread declaration.
* winsup.h (ExitThread): Define as 'exit_thread' to ensure no accidental use.
* sigproc.cc (exit_thread): New function.
(wait_sig): Handle __SIGTHREADEXIT case. Don't just block rather than
returning from this function.
* sigproc.h (__SIGTHREADEXIT): New enum.
(exit_thread): Declare.
* sync.cc (muto::release): Accept a tls command-line argument.
* sync.h (muto::release): Accept a tls command-line parameter. Default to
&_my_tls.
* cygerrno.h (__set_errno): Define as extern so that no function code is ever
emitted.
* cygserver_ipc.h (cygserver_ipc.h): Ditto.
* miscfuncs.h (transform_chars): Ditto.
* path.h (has_attribute): Ditto.
* security.h (privilege_luid): Ditto.
* winsup.h (flush_file_buffers): Ditto.
logs easier. Throughout, change /dev/tty* to /dev/pty*. Throughout, add flags
argument to fhandler_*::dup methods.
* devices.in: Rename (temporarily?) /dev/ttyN to /dev/ptyN. Add /dev/ptymN
devices for pty masters.
* devices.cc: Regenerate.
* devices.h (MAX_CONSOLES): Set to max number supported by devices.in.
(fh_devices::FH_PTMX): Rename from FH_PTYM.
(device::operator int): Return by reference.
* dtable.cc (fh_alloc): Take pc as an argument rather than just the device.
This makes debugging easier since more information is available. Actually
implement handling for already-allocated pty master devices. Make different
decisions when generating fhandler for not-opened devices. Add kludge to deal
with opening /dev/tty.
(cnew_no_ctor): New macro.
(build_fh_pc): Make debugging output more verbose. Use new clone() fhandler
interface to duplicate archetypes. Reset last term opened.
(dtable::dup_worker): Use Use new clone() fhandler interface to duplicate
archetypes. Pass flags to child dup handler.
(dtable::dup3): Set O_NOCTTY flag if newfd is not stdin/stdout/stderr.
* fhandler.cc (fhandler_base::reset): Rename from operator =() and reduce
functionality and sense of copy direction.
(fhandler_base::open_with_arch): Use published interface to query io_handle().
Use new copyto() fhandler method to copy from/to found archetype.
* fhandler.h: Throughout, delete size(), add copyout, clone, and fhandler_*
(void *) methods.
(fhandler_base::reset): Rename from operator =().
(fhandler_termios::is_dev_tty): Delete.
(fhandler_termios): change "protected" region to "private".
(fhandler_termios::is_dev_tty): Delete.
(fhandler_termios): Rearrange protected/public.
(fhandler_termios::fhandler_termios): Remember last fhandler_termios "opened".
(fhandler_termios::~fhandler_termios): Forget last fhandler_termios opened.
(ioctl): Rename from ioctl_termios. Take a void * argument. Reflect argument
change in pinfo::set_ctty.
(fhandler_console::dup): Declare new function. Set ctty here if appropriate.
(fhandler_pty_master::from_master): Privatize.
(fhandler_pty_master::to_master): Ditto.
(fhandler_pty_master::dwProcessId): Ditto.
(fhandler_pty_master::fhandler_pty_master): Add an `int' argument.
(fhandler_pty_master::open_setup): Declare new function.
(fhandler_pty_master::~fhandler_pty_master): Declare new method.
(fhandler_nodevice): Remove commented out function declaration.
* fhandler_console.cc: Use get_ttyp() instead of tc() throughout.
(fhandler_console::dup): Define new function to set controlling ctty on dup, as
appropriate.
(fhandler_console::ioctl): Reflect ioctl_termios name change.
(fhandler_console::setup): Rename from get_tty_stuff.
(fhandler_console::open_setup): Reflect argument change in pinfo::set_ctty.
(fhandler_console::fhandler_console): Set _tc here.
* fhandler_termios.cc (handler_termios::ioctl): Rename. Take a void * arg like
other ioctl functions.
* fhandler_tty.cc (fhandler_pty_slave::dup): Call myself->set_ctty to
potentially reset the controlling terminal.
(fhandler_pty_slave::ioctl): Reflect name/arg change for ioctl_termios.
(fhandler_pty_slave::fhandler_pty_slave): Take a "unit" argument. Call setup()
here so that we will know the unit number of this fhandler as soon as possible.
Set the unit as appropriate.
(handler_pty_master::open): Move most stuff to constructor and open_setup.
(handler_pty_slave::open_setup): Reflect argument change in pinfo::set_ctty.
(handler_pty_master::open_setup): Define new function.
(fhandler_pty_master::cleanup): Clear handles as a flag that the destructor
does not have to do "close" operations.
(fhandler_pty_master::close): Ditto.
(fhandler_pty_master::~fhandler_pty_master): Define new method.
(fhandler_pty_master::ioctl): Reflect name/arg change for ioctl_termios.
(fhandler_pty_master::setup): Allocate tty here. Rely on handles being
returned from allocated test rather than opening them here. Avoid setting
_need_nl here since it is already zeroed in the constructor. Set up device
information with DEV_TTYM_MAJOR.
* path.h (path_conv &operator =): Take a const argument.
(path_conv::dup): Ditto.
(pathconv_arg::PC_OPEN): New enum.
(pathconv_arg::PC_CTTY): Ditto.
(path_types::PATH_CTTY): Ditto.
(path_types::PATH_OPEN): Ditto.
(path_conv::isopen): New method.
(path_conv::isctty_capable): Ditto.
* path.cc (path_conv::check): Set PATH_OPEN and PATH_CTTY as appropriate.
* pipe.cc (fhandler_pipe::open): Use copyto to copy pipe handle.
* syscall.cc (open): Reinstate fd > 2 check to disallow resetting ctty on
non-std* handles.
* tty.cc (tty_list::allocate): Pass out handles for allocated tty. use
`not_allocated' to find unallocated ttys. Avoid keeping the lock since the
allocation of the tty should be sufficient to prevent multiple access.
(tty::not_allocated): Clarify comment. Rename. Return handles when an unused
tty is found. Simply test for existing tty.
(tty::exists): Rewrite to use `not_allocated'.
* tty.h (NTTYS): Reset down to actual number supported by devices.in.
(tty::not_allocated): Declare new function.
(tty_list::allocate): Pass out read/write tty handles. Zero them when not
found.
* fhandler_proc.cc: Reflect name change from FH_PTYM -> FH_PTMX.
* pinfo.h (pinfo::set_ctty): Reduce/reorder arguments passed in.
* pinfo.cc (pinfo::set_ctty): Ditto. Just use tc() built into the passed-in
fhandler_termios pointer. Return true if ctty is assigned.
* syscalls.cc (open): Call build_fh_pc with PC_OPEN flag. Set PC_CTTY if
appropriate.
(stat_worker): Remove is_dev_tty () stuff.
* errno.cc (geterrno_from_nt_status): Define.
* flock.cc: Fix copyright dates.
* ntdll.h (enum _TIMER_TYPE): Define.
(PTIMER_APC_ROUTINE): Define.
(NtCancelTimer): Declare.
(NtCreateTimer): Declare.
(NtSetTimer): Declare.
* posix_ipc.cc (ipc_cond_timedwait): Rewrite to make interruptible and
restartable. Call pthread_testcancel in case of timeout to enable
pthread_cancel on waiting thread. Replace WFMO timeout with waiting
for a waitable timer. Explain why. Replace single call to WFMO with
two calls, one for the event, one for the mutex. Don't lock mutex in
case of error.
(ipc_cond_signal): Make void function.
(ipc_cond_close): Ditto.
(_mq_send): Immediately return -1 in case of error from
ipc_cond_timedwait.
(_mq_receive): Ditto.
(__seterrno_from_nt_status): Call seterrno_from_nt_status.
* errno.cc (seterrno_from_win_error): Set errno without calling
set_errno to avoid packing strace output with errno messages.
(seterrno_from_nt_status): New function to print NT status as well as
resulting Windows error.
error code as well as errno. Use throughout where errno is set from
NT status.
(set_errno): Evaluate val only once.
* fhandler_disk_file.cc (fhandler_base::fstat_by_handle): Fix typo in
debug output.
* fhandler_mem.cc (fhandler_dev_mem::open): Rely on
__seterrno_from_nt_status setting Win32 error code in debug output.
* fhandler_proc.cc (format_proc_uptime): Ditto.
(format_proc_stat): Ditto.
* fhandler_process.cc (format_process_stat): Ditto.
* sysconf.cc (sysconf): Ditto.
version.
* debug.cc (__set_errno): Ditto.
* exceptions.cc (handle_sigsuspend): Remove spurious sig_dispatch_pending call.
(set_signal_mask): When there seem to be pending signals to dispatch, tell
signal_dispatch_pending/sig_send not to specifically call any handlers.
* sigproc.h (sig_dispatch_pending): Change declaration to void.
* sigproc.cc (sig_dispatch_pending): Change definition to void. Take an
argument to determine whether to tell sig_send to wait for handler to be
called.
* sigproc.cc (sig_send): Don't call signal handler when sig == __SIGFLUSHFAST.
(wait_sig): Honor __SIGFLUSHFAST. Guard against sigpacket::process nuking
si_signo.
* sigproc.h (__SIGFLUSHFAST): Define new special signal.
(sig_dispatch_pending): Change declaration to void. Take optional boolean
argument.
* fork.cc (vfork): Add debugging output.
cygerrno.h.
* include/cygwin/config.h (__DYNAMIC_REENT__): Define.
* include/cygwin/version.h: Bump API minor version.
* cygwin.din: Export __getreent
* cygerrno.h: Include errno.h. Fix places where _impure_ptr is used directly
to store the errno value.
* debug.cc (__set_errno): Ditto.
* errno.cc: Remove _RRENT_ONLY define to get errno.cc compiled.
* signal.cc: Rename _reent_clib to _REENT throughout.
* thread.h (reent_clib): Remove prototype.
* thread.cc (reent_clib): Rename reent_clib to __getreent. Return _impure_ptr
until MTinterface is initialized.
(reent_winsup): Fix a possible SEGV when _r == NULL. Return NULL instead.
* MTinterface::fixup_after_fork: Switch reent back to _impure_ptr to keep
signal handling running when fork is called from a thread other than the
mainthread.
macro.
(setclexec_pid): Replace old handle with new handle.
* debug.h: Reflect change in arguments for setclexec_pid.
* fhandler.cc (fhandler_base::set_inheritance): Ditto.
(fhandler_base::fork_fixup): Ditto.
* cygerrno.h: Reflect return value change for set_errno.
debugging.
(__set_errno): Declare when DEBUGGING.
* cygheap.h (cygheap_fdget::cygheap_fdget): Add a flag to control when errno is
set.
* debug.cc (__set_errno): New function.
* fcntl.cc (_fcntl): Fix so that correct fd is used for second argument to
dup2.
* syscalls.cc (_cygwin_istext_for_stdio): Don't set errno here when using
cygheap_fdget.
Windows shortcuts to avoid compiler flag `-fvtable-thunks'.
* shortcut.h: Ditto.
* Makefile.in: Add shortcut.o to DLL_OFILES.
* cygerrno.h: Provide a C interface to `geterrno_from_win_error' for
using in shortcut.c.
* errno.cc (geterrno_from_win_error): Define as extern "C".
* path.cc (struct symlink_info): Remove methods `check_shortcut' and
`check_sysfile'.
(shortcut_header): Move to shortcut.c.
(shortcut_initalized): Ditto.
(create_shortcut_header): Ditto.
(cmp_shortcut_header): Ditto.
(symlink_info::check_shortcut): Ditto. Reorganize as a plain C function.
(symlink_info::check_sysfile): Redefine as a global function using the
same parameter list as `check_shortcut' for clearness.
(symlink_info::check): Change parameter list for calls to
`check_shortcut' and `check_sysfile'.
* dcrt0.cc (dll_crt0_1): Call signal_fixup_after_exec where appropriate. Set
myself->uid from parent version. Just use ThreadItem Init method. Close or
store hexec_proc as appropriate.
(_dll_crt0): Store user_data->forkee here so that proper tests can be made
subsequently.
(do_exit): Remove hExeced stuff.
* environ.cc (environ_init): Accept environ count as well as environ pointer.
* environ.h: Reflect above change.
* pinfo.cc (pinfo_init): Ditto. Accept environ count.
(fixup_in_spawned_child): Remove.
* spawn.cc (spawn_guts): Move signal code to dll_crt0_1. Don't suspend execing
process since it is no longer necessary. Store envc.
* exceptions.cc (signal_fixup_after_exec): New function.
(call_handler): Remove hExeced test.
* child_info.h (cygheap_exec_info): Store envc as well as envp.
(child_info_spawn): Store hexec_proc so that it can be closed in child.
* path.cc (normalize_posix_path): Avoid intermediate use of temporary cwd buf.
(normalize_win32_path): Ditto.
(cwdstuff::get_initial): Always set lock.
* sigproc.h: Remove hExeced.
* strace.cc (strace::vsprntf): Modify to accomodate for lack of hExeced.
* thread.cc (MTinterface::Init): Merge Init1 and ClearReent into this method.
(MTinterface::Init1): Eliminate.
(MTinterface::ClearReent): Eliminate.
* thread.h: Reflect above changes.
* include/sys/strace.h (strace): Make microseconds() public. Make various
functions 'regparm', throughout.
* pinfo.h (_pinfo): Inline simple signal manipulation functions. Requires
inclusion of thread.h which was removed from .cc files, where appropriate.
throughout.
* pinfo.cc: Eliminate signal manipulation functions.
(_pinfo::exit): Calculate total rusage for exiting process here.
* cygheap.cc (size2bucket): Eliminate.
(init_buckets): Ditto.
(_cmalloc): Calculate size and bits in a loop rather than going through a
function call.
(_crealloc): Use stored array index to calculate allocated size.
* spawn.cc (spawn_guts): Use _pinfo exit method to exit, calculating cpu usage.
required.
* errno.cc: Use DWORD to hold Windows errors.
(geterrno_from_win_error): New function.
(seterrno_from_win_error): Use geterrno_from_win_error to convert supplied
windows error (suggested by Corinna Vinschen).
* path.cc (symlink_info): Add error element.
* path.cc (path_conv::check): Remove errno setting. Use new symlink_info errno
element to set path_conv error, where appropriate.
(symlink_info::check): Set error element rather than attempting to manipulate
errno. Add more checks for trailing / and /.. even though they are currently
useless. Avoid setting EINVAL.
* path.cc (normalize_posix_path): Correct check for trailing /.