* Makefile.tpl (configure-stageN-MODULE): Pass --with-build-libsubdir
for stages after the first.
* Makefile.in: Regenerate.
config:
2006-07-19 Paolo Bonzini <bonzini@gnu.org>
* acx.m4: Support --with-build-libsubdir and AC_SUBST
build_libsubdir.
Sync from gcc:
2007-07-03 Paolo Bonzini <bonzini@gnu.org>
PR other/27063
* configure.in: Test subdir_requires and give an appropriate
error message.
* configure: Regenerate.
2006-06-16 Rainer Orth <ro@TechFak.Uni-Bielefeld.DE>
PR target/27540
* configure.in: Only enable libgomp on IRIX 6.
* configure: Regenerate.
PR bootstrap/28072
* configure.in: Add target-boehm-gc to noconfigdirs depending on
whether target-libjava is being configured instead of whether the
java front end is enabled.
* configure: Regenerate.
to R_ARM_LDC_SB_G{0,1,2} respectively.
bfd/
* bfd-in2.h: Regenerate.
* elf32-arm.c (R_ARM_ALU_PC_G0_NC, R_ARM_ALU_PC_G0,
R_ARM_ALU_PC_G1_NC, R_ARM_ALU_PC_G1, R_ARM_ALU_PC_G2,
R_ARM_LDR_PC_G1, R_ARM_LDR_PC_G2, R_ARM_LDRS_PC_G0,
R_ARM_LDRS_PC_G1, R_ARM_LDRS_PC_G2, R_ARM_LDC_PC_G0,
R_ARM_LDC_PC_G1, R_ARM_LDC_PC_G2, R_ARM_ALU_SB_G0_NC,
R_ARM_ALU_SB_G0, R_ARM_ALU_SB_G1_NC, R_ARM_ALU_SB_G1,
R_ARM_ALU_SB_G2, R_ARM_LDR_SB_G0, R_ARM_LDR_SB_G1,
R_ARM_LDR_SB_G2, R_ARM_LDRS_SB_G0, R_ARM_LDRS_SB_G1,
R_ARM_LDRS_SB_G2, R_ARM_LDC_SB_G0, R_ARM_LDC_SB_G1,
R_ARM_LDC_SB_G2): New relocation types.
(R_ARM_PC13): Rename to AAELF name R_ARM_LDR_PC_G0 and
adjust HOWTO entry to be consistent with R_ARM_LDR_PC_G1
and friends.
(elf32_arm_howto_table_3): Delete; contents merged into
elf32_arm_howto_table_2.
(elf32_arm_howto_from_type): Adjust correspondingly.
(elf32_arm_reloc_map): Extend with the above relocations.
(calculate_group_reloc_mask): New function.
(identify_add_or_sub): New function.
(elf32_arm_final_link_relocate): Support for the above
relocations.
* reloc.c: Add enumeration entries for BFD_RELOC_ARM_...
codes to correspond to the above relocations.
gas/
* config/tc-arm.c (enum parse_operand_result): New.
(struct group_reloc_table_entry): New.
(enum group_reloc_type): New.
(group_reloc_table): New array.
(find_group_reloc_table_entry): New function.
(parse_shifter_operand_group_reloc): New function.
(parse_address_main): New function, incorporating code
from the old parse_address function. To be used via...
(parse_address): wrapper for parse_address_main; and
(parse_address_group_reloc): new function, likewise.
(enum operand_parse_code): New codes OP_SHG, OP_ADDRGLDR,
OP_ADDRGLDRS, OP_ADDRGLDC.
(parse_operands): Support for these new operand codes.
New macro po_misc_or_fail_no_backtrack.
(encode_arm_cp_address): Preserve group relocations.
(insns): Modify to use the above operand codes where group
relocations are permitted.
(md_apply_fix): Handle the group relocations
ALU_PC_G0_NC through LDC_SB_G2.
(tc_gen_reloc): Likewise.
(arm_force_relocation): Leave group relocations for the linker.
(arm_fix_adjustable): Likewise.
gas/testsuite/
* gas/arm/group-reloc-alu.d: New test.
* gas/arm/group-reloc-alu-encoding-bad.d: New test.
* gas/arm/group-reloc-alu-encoding-bad.l: New test.
* gas/arm/group-reloc-alu-encoding-bad.s: New test.
* gas/arm/group-reloc-alu-parsing-bad.d: New test.
* gas/arm/group-reloc-alu-parsing-bad.l: New test.
* gas/arm/group-reloc-alu-parsing-bad.s: New test.
* gas/arm/group-reloc-alu.s: New test.
* gas/arm/group-reloc-ldc.d: New test.
* gas/arm/group-reloc-ldc-encoding-bad.d: New test.
* gas/arm/group-reloc-ldc-encoding-bad.l: New test.
* gas/arm/group-reloc-ldc-encoding-bad.s: New test.
* gas/arm/group-reloc-ldc-parsing-bad.d: New test.
* gas/arm/group-reloc-ldc-parsing-bad.l: New test.
* gas/arm/group-reloc-ldc-parsing-bad.s: New test.
* gas/arm/group-reloc-ldc.s: New test.
* gas/arm/group-reloc-ldr.d: New test.
* gas/arm/group-reloc-ldr-encoding-bad.d: New test.
* gas/arm/group-reloc-ldr-encoding-bad.l: New test.
* gas/arm/group-reloc-ldr-encoding-bad.s: New test.
* gas/arm/group-reloc-ldr-parsing-bad.d: New test.
* gas/arm/group-reloc-ldr-parsing-bad.l: New test.
* gas/arm/group-reloc-ldr-parsing-bad.s: New test.
* gas/arm/group-reloc-ldr.s: New test.
* gas/arm/group-reloc-ldrs.d: New test.
* gas/arm/group-reloc-ldrs-encoding-bad.d: New test.
* gas/arm/group-reloc-ldrs-encoding-bad.l: New test.
* gas/arm/group-reloc-ldrs-encoding-bad.s: New test.
* gas/arm/group-reloc-ldrs-parsing-bad.d: New test.
* gas/arm/group-reloc-ldrs-parsing-bad.l: New test.
* gas/arm/group-reloc-ldrs-parsing-bad.s: New test.
* gas/arm/group-reloc-ldrs.s: New test.
ld/testsuite/
* ld-arm/group-relocs-alu-bad.d: New test.
* ld-arm/group-relocs-alu-bad.s: New test.
* ld-arm/group-relocs.d: New test.
* ld-arm/group-relocs-ldc-bad.d: New test.
* ld-arm/group-relocs-ldc-bad.s: New test.
* ld-arm/group-relocs-ldr-bad.d: New test.
* ld-arm/group-relocs-ldr-bad.s: New test.
* ld-arm/group-relocs-ldrs-bad.d: New test.
* ld-arm/group-relocs-ldrs-bad.s: New test.
* ld-arm/group-relocs.s: New test.
* ld-arm/arm-elf.exp: Wire in new tests.
Sync from gcc:
2006-06-12 David Ayers <d.ayers@inode.at>
PR bootstrap/27963
PR target/19970
* configure.in: Remove target-boehm-gc from noconfigdirs where
${libgcj} is specified.
* configure: Regenerate.
Sync from gcc:
2005-01-12 David Edelsohn <edelsohn@gnu.org>
Andreas Schwab <schwab@suse.de>
PR bootstrap/18033
* config-ml.in: Eval option if surrounded by single quotes.
Sync from gcc:
2006-06-06 David Ayers <d.ayers@inode.at>
PR libobjc/13946
* Makefile.def: Add dependencies for libobjc which boehm-gc.
* Makefile.in: Regenerate.
* configure.in: Add --enable-objc-gc at toplevel and have it
enable boehm-gc for Objective-C.
Remove target-boehm-gc from libgcj.
Add target-boehm-gc to target_libraries.
Add target-boehm-gc to noconfigdirs where ${libgcj}
is specified.
Assert that boehm-gc is supported when requested for Objective-C.
Only build boehm-gc if needed either for Java or Objective-C.
* configure: Regenerate.
2006-06-05 Paolo Bonzini <bonzini@gnu.org>
PR 27674
* Makefile.tpl (configure-[+prefix+][+module+],
all-[+prefix+][+module+]): Depend on stage_current if bootstrapping.
Remove rule to unstage bootstrapped modules.
(stage_current): New.
* Makefile.in: Regenerate.
2006-05-20 John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
Andreas Tobler <a.tobler@schweiz.ch>
* configure.in: Enable libgcj for hppa*-hp-hpux11*.
* configure: Rebuilt.
Revert
2006-01-31 Richard Guenther <rguenther@suse.de>
Paolo Bonzini <bonzini@gnu.org>
* Makefile.def (target_modules): Add libgcc-math target module.
* configure.in (target_libraries): Add libgcc-math target library.
(--enable-libgcc-math): New configure switch.
* Makefile.in: Re-generate.
* configure: Re-generate.
PR bootstrap/25670
* Makefile.tpl ([+compare-target+]): Print explanation messages.
* Makefile.def (ADAFLAGS, BOOT_ADAFLAGS, LANGUAGES): New flags_to_pass.
* Makefile.tpl (BASE_FLAGS_TO_PASS): Support optional flags_to_pass.
(EXTRA_GCC_FLAGS): Remove ADAFLAGS, BOOT_ADAFLAGS, LANGUAGES,
BUILD_PREFIX, BUILD_PREFIX_1.
* configure.in: (BUILD_PREFIX, BUILD_PREFIX_1): Don't substitute.
* Makefile.def (bootstrap stage 1): Pass LIBCFLAGS too.
* Makefile.tpl (POSTSTAGE1_FLAGS_TO_PASS): Override LIBCFLAGS too.
* Makefile.tpl (configure-stage[+id+]-[+prefix+][+module+],
all-stage[+id+]-[+prefix+][+module+], : Use $(current_stage) instead
of `cat stage_current`. Always provide the `r' and `s' variables.
(clean-stage[+id+]-[+prefix+][+module+]): Likewise, and make it into
a single shell execution.
(configure-[+prefix+][+module+], all-[+prefix+][+module+]): For
bootstrapped modules, make the stage1 module if the build was not
started yet, else build the current stage.
(all-host, all-target): Omit bootstrapped modules (if bootstrapping).
(all-build, all-host, all-target, [+make_target+]-host,
[+make_target+]-target): Do not use \-continued lines.
(target modules): Depend on stage_last, not all-gcc, if bootstrapping.
(current_stage, restrap, stage_last): New.
* Makefile.in: Regenerate.
* configure: Regenerate.
Andreas Schwab <schwab@suse.de>
* configure: Regenerate.
config:
2006-02-14 Paolo Bonzini <bonzini@gnu.org>
Andreas Schwab <schwab@suse.de>
* acx.m4 (NCN_STRICT_CHECK_TARGET_TOOLS): Use correct program name.
(ACX_CHECK_INSTALLED_TARGET_TOOL): Likewise, and always set $1.
* configure.in: Set with_gnu_as, with_gnu_ld, with_newlib earlier.
Set md_exec_prefix. Use ACX_CHECK_INSTALLED_TARGET_TOOL to find
the assembler, linker and binutils.
* configure: Regenerate.
config:
2006-01-16 Paolo Bonzini <bonzini@gnu.org>
* acx.m4 (NCN_STRICT_CHECK_TARGET_TOOLS): Test $with_build_time_tools.
(ACX_PATH_SEP): New.
(ACX_TOOL_DIRS): Move here from the gcc directory.
(ACX_CHECK_INSTALLED_TARGET_TOOL): New.
(GCC_TARGET_TOOL): Do not use a host tool if we found a target tool
with a complete path in either $with_build_time_tools or $exec_prefix.
Sync from gcc:
2006-01-04 Paolo Bonzini <bonzini@gnu.org>
PR bootstrap/24252
* Makefile.def (flags_to_pass): Add STAGE1_CFLAGS and STAGE1_LANGUAGES.
* Makefile.tpl (OBJDUMP): New.
(EXTRA_HOST_FLAGS): Add it.
(EXTRA_GCC_FLAGS): Remove flags already specified in flags_to_pass.
* Makefile.tpl (stage[+id+]-start, stage[+id+]-end): Do not try
to use symbolic links between directories. Avoid race conditions
or make them harmless.
* configure.in: Do not try to use symbolic links between directories.
* Makefile.def (LEAN): Pass.
* Makefile.tpl (LEAN): Define.
(stage[+id+]-start): Accept that the previous directory does not
exist, if the bootstrap is lean.
(stage[+id+]-bubble): Invoke lean bootstrap commands after
stage[+id+]-start. Use a makefile variable and an `if' instead of a
configure substitution.
([+compare-target+]): Likewise.
([+bootstrap-target+]-lean): New.
* configure.in: Remove lean bootstrap support from here.
* Makefile.in: Regenerate.
* configure: Regenerate.
2006-01-02 Andreas Schwab <schwab@suse.de>
* configure.in: When reconfiguring remove Makefile in
all stage directories.
* configure: Regenerate.
Revert Ada-related part of the previous change.
* Makefile.def (ADAFLAGS, BOOT_ADAFLAGS, ADAFLAGS_FOR_TARGET):
Do not pass.
* Makefile.tpl (BOOT_ADAFLAGS): Do not define.
* Makefile.in: Regenerate.
* configure.in: Do not include mt-ppc-aix target fragment.
* configure: Regenerate.
config:
2005-12-20 Paolo Bonzini <bonzini@gnu.org>
Revert Ada-related part of the previous change.
* mt-ppc-aix: Delete.
2005-12-05 Paolo Bonzini <bonzini@gnu.org>
Sync with gcc:
2005-12-05 Paolo Bonzini <bonzini@gnu.org>
* configure.in (CONFIGURED_BISON, CONFIGURED_YACC, CONFIGURED_M4,
CONFIGURED_FLEX, CONFIGURED_LEX, CONFIGURED_MAKEINFO): Remove
"CONFIGURED_" from the AC_CHECK_PROGS invocation. Move below.
Find in-tree tools if available.
(EXPECT, RUNTEST, LIPO, STRIP): Find them and substitute them.
(CONFIGURED_*_FOR_TARGET): Don't set nor substitute.
(*_FOR_TARGET): Set them with GCC_TARGET_TOOL.
(COMPILER_*_FOR_TARGET): New.
* Makefile.tpl (HOST_EXPORTS): Add *_FOR_TARGET symbols that gcc needs.
(BASE_TARGET_EXPORTS): Use COMPILER_*_FOR_TARGET symbols.
(CONFIGURED_*, USUAL_*): Remove.
(BISON, YACC, FLEX, LEX, M4, MAKEINFO, EXPECT, RUNTEST, LIPO,
STRIP): Use autoconf substitutions.
(COMPILER_AS_FOR_TARGET, COMPILER_LD_FOR_TARGET,
COMPILER_NM_FOR_TARGET): New.
(EXTRA_HOST_FLAGS): Pass LIPO and STRIP.
(all): Make all-host and all-target in parallel.
(do-[+make_target+], do-check, install, [+compare-target+]): Ensure
that $$r and $$s are set before invoking a recursive make.
(stage[+id+]-bubble): Likewise, and invoke the comparison at the end.
([+bootstrap-target+]): Inline most of the `all' target.
2005-11-29 Ben Elliston <bje@au.ibm.com>
* Makefile.tpl (clean-target-libgcc): Invoke clean-target-libgcc
from the gcc build directory.
* Makefile.in: Regenerate.
2005-11-29 Ben Elliston <bje@au.ibm.com>
* Makefile.def: Add new libdecnumber host_module. Make all-gcc
depend on all-libdecnumber.
* configure.in (host_libs): Include libdecnumber.
* Makefile.in: Regenerate.
* configure: Likewise.
2005-11-21 Kean Johnston <jkj@sco.com>
* config.sub, config.guess: Sync from upstream sources.
config:
2005-12-05 Paolo Bonzini <bonzini@gnu.org>
* acx.m4 (GCC_TARGET_TOOL): New.
Daniel Jacobowitz
Paolo Bonzini
Jakub Jelinek
Alexandre Oliva
David Ayers
Mark Shinwell
John David Anglin
Jeff Johnston
Carlos O'Donell
Ben Elliston
DJ Delorie
H.J. Lu
Nick Clifton
Nathan Sidwell