It looks like csky was created by copying & pasting the m68k port,
but m68k-specific stuff was left over related to target selection.
The makefile doesn't do anything with it, so punt it all to make
the file much simpler.
The top level dir isn't doing anything interesting, just recursing into
subdirs. So this change isn't terribly exciting. But it sets us up for
doing more fun stuff in follow up commits.
[TODO] Check test targets
The common $DO variable is used by the multilib logic to control which
target to multiplex. But the m68k subdir is also using $DO to control
which target (m68k or fido) to build. As we flatten things to automake,
this conflict shows up and breaks the m68k build. Just rename the m68k
variable to something unique to avoid it.
Commit 754f8def0d ("libgloss: merge stub
arch configure scripts up a level") had an unintended side-effect: the
MULTI* variables in the Makefiles no longer get rewritten at configure
time in the subdirs. Only the top-level Makefile still is. This is
because the configure integration of multilib (both the way libgloss
did it manually and the way AM_ENABLE_MULTILIB does it) only rewrites
"Makefile".
We could try propagating the MULTI* variables from libgloss/Makefile
down via FLAGS_TO_PASS, but this runs into a limitation: the multilib
logic uses this variable to switch from libgloss/ to each multilib
libgloss/, and libgloss uses this variable to enter subdirectories.
The latter we want, but the former ends up overridding the Makefile
environment. We could side-step that with some GNU Make directives,
but it feels like we're getting a bit too deep down the rabbit hole.
Instead, let's call config-ml.in ourselves for each subdir Makefile
that the top-level configure generates. This restores the previous
behavior and should be less risky in general.
This logic should be unnecessary when/if we switch libgloss over to
a non-recursive Automake build (since all build+install settings are
in the single libgloss/Makefile), but it'll be a while before we can
land that rework, so let's fix this up now.
The current libgloss multilib logic is almost exactly the same as the
config/multi.m4, and the differences should be minor, so switch over
to that to delete custom logic on ourside.
The insertions here look larger and that's because none of the scripts
were declaring --enable-multilib explicitly even though they checked the
flag and changed behavior.
These subdirs have unique configure scripts to do some compiler tests.
The checks should work for all targets, so hoist them up to the top
libgloss dir. This should allow us to delete these subdir configure
scripts.
It means the top-level gains autoheader support, but that's fine.
It wasn't exporting any defines previously (i.e. -D into CPPFLAGS),
and all of the defines it now exports are only used by code in the
libnosys subdir which was expecting to have a config.h.
Depending on the processing order of rules when installing in parallel,
these install rules might be processed before some other rule happens
to create the respective dirs. Make sure each one creates the needed
dirs before installing into them.
For arches that had their configure merged into the top-level, make
sure they don't still depend on a subdir configure script that no
longer exists. I had cleaned this up for some of the subdirs, but
these got lost in the shuffle.
Author: Mike Frysinger <vapier@gentoo.org>
Date: Mon Jan 17 22:20:20 2022 -0500
newlib: internalize HAVE_INITFINI_ARRAY
This define is only used by newlib internally, so stop exporting it
as HAVE_INITFINI_ARRAY since this can conflict with defines packages
use themselves.
We don't really need to add _ to HAVE_INIT_FINI too since it isn't
exported in newlib.h, but might as well be consistent here.
We can't (easily) add this to newlib_cflags like HAVE_INIT_FINI is
because this is based on a compile-time test in the top configure,
not on plain shell code in configure.host. We'd have to replicate
the test in every subdir in order to have it passed down.
With the move of configure scripts out of target directories, relative
paths to top_srcdir got broken:
/bin/sh: .../newlib/libgloss/../../mkinstalldirs: No such file or directory
Fix the PRU build by switching to srcroot relative path, as rest of targets do.
Fix the Blackfin build in the same way.
Signed-off-by: Dimitar Dimitrov <dimitar@dinux.eu>
For about half the ports, we don't need a subdir configure script.
They're using the config/default.m[ht] rules, and they aren't doing
any unique configure tests, so they exist just to pass top-level
settings down to create the arch Makefile. We can just as easily
do that from the top-level Mkaefile directly and skip configure.
Most of the remaining configure scripts could be migrated up to
the top-level too, but that would require care in each subdir.
So let's be lazy and put that off to another day.
A bunch of subdirs want this, so make it available in the common
dir to ease future merges. It isn't used directly in libgloss so
it should be harmless as-is.
Use standard AC_MSG_WARN macro in the top-level configure, and delete
the message from all the subdirs. There's no need to issue this more
than once per libgloss build.
The newlib & libgloss dirs are already generated using autoconf-2.69.
To avoid merging new code and/or accidental regeneration using diff
versions, leverage config/override.m4 to pin to 2.69 exactly. This
matches what gcc/binutils/gdb are already doing.
The README file already says to use autoconf-2.69.
To accomplish this, it's just as simple as adding -I flags to the
top-level config/ dir when running aclocal. This is because the
override.m4 file overrides AC_INIT to first require the specific
autoconf version before calling the real AC_INIT.
In order to transition to automake, we have to use hardcoded paths in
the AC_CONFIG_AUX_DIR macro call (since automake evaluates the path
itself, and doesn't expand vars), so simplify all the calls here.
Regenerate the files using automake-1.15 & autoconf-2.69 to match the
binutils/gdb/gcc projects. Ran:
libgloss $ find -name configure.ac -printf '%h\n' | while read d; do
(cd $d; export WANT_AUTOCONF=2.69 WANT_AUTOMAKE=1.15;
aclocal-1.15 -I.. && autoconf-2.69); done
The file configure.in was renamed to configure.ac in libgloss/riscv but
the hard coded name in the Makefile for that directory was not updated.
This patch simply renamed this to configure.ac.
These subdirs were missing aclocal.m4 files pulling in macros from
../acinclude.m4 which caused some macros to not be expanded. For
example, autoconf complains:
configure.ac:25: error: possibly undefined macro: LIB_AC_PROG_CC
If this token and others are legitimate, please use m4_pattern_allow.
See the Autoconf documentation.
These were generated with aclocal-1.9 as that seems to be what was
used in these dirs previously, and with whatever version of autoconf
the specific subdir was using. This should minimize diffs.
Autoconf emits a warning for this:
configure.ac:75: warning: AC_CACHE_VAL(libc_symbol_prefix, ...): suspicious cache-id, must contain _cv_ to be cached
Rename the variable to match the naming in libnosys/ subdir.
When running autoconf-2.69 in here, we get:
configure.ac:57: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body
../../lib/autoconf/lang.m4:193: AC_LANG_CONFTEST is expanded from...
../../lib/autoconf/general.m4:2503: _AC_PREPROC_IFELSE is expanded from...
../../lib/autoconf/general.m4:2518: AC_PREPROC_IFELSE is expanded from...
configure.ac:57: the top level
configure.ac:61: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body
../../lib/autoconf/lang.m4:193: AC_LANG_CONFTEST is expanded from...
../../lib/autoconf/general.m4:2503: _AC_PREPROC_IFELSE is expanded from...
../../lib/autoconf/general.m4:2518: AC_PREPROC_IFELSE is expanded from...
configure.ac:61: the top level
Add AC_LANG_PROGRAM wrappings to fix these.
The current implementation does not reliably initialize t0 once.
Additionally the initialization requires two calls to _gettimeofday().
Let's sacrifice a byte to keep the initialization status
and reduce the maximum number of calls to _gettimeofday().
This has caused issues in an application that invokes clock().
The problematic situation is as follows:
1) The program calls clock() which calls _times().
2) _gettimeofday(&t0, 0) puts 0 in t0.tv_usec (because less than 1 us has
elapsed since the beginning of time).
3) _gettimeofday(&t, 0) puts 1 in t.tv_usec (since now more than 1 us has
elapsed since the beginning of time).
4) That call to clock() returns 1 (the value from step 3 minus the value in
step 2).
5) The program does a second call to clock().
6) The code above still sees 0 in t0 so it tries to update t0 again and
_gettimeofday(&t0, 0) puts 1 in t0.tv_usec.
7) The _gettimeofday(&t, 0) puts 1 in t.tv_usec (since less than 1us has
elapsed since step 3).
8) clock() returns 0 (step 7 minus step 6) and indicates that time is
moving backwards.
Signed-off-by: Christoph Muellner <cmuellner@gcc.gnu.org>
visium and iq2000 have libgloss configure bits that reference
target_makefile_frag, but it's never set. This leads to failures during the
configure process and an empty libgloss/<target>/Makefile. Naturally bad
things happen with an empty Makefile.
This patch initializes target_makefile_frag for both targets in their
configure.in files and updates the generated configure files. This fixes the
build failures. I've been using it in my tester for about a week and both
targets have flipped from consistently failing to consistently passing.
* libgloss/visium/configure.in (target_makefile_frag): Define.
* libgloss/visium/configure: Regenerated.
* libgloss/iq2000/configure.in (target_makefile_frag): Define.
* libgloss/iq2000/configure: Regenerated.
Binutils LD default linker script was recently fixed to allow memory
sizes to be set via command line. Use this feature to remove the special
sim linker script in libgloss.
It is acceptable to require newer Binutils version here because simulator
target is only used for regression testing the toolchain. Real HW
targets are not affected.
Signed-off-by: Dimitar Dimitrov <dimitar@dinux.eu>
- RISC-V 32 bits linux/glibc didn't provide gettimeofday anymore
after upstream, because RV32 didn't have backward compatible issue,
so RV32 only support 64 bits time related system call.
- So using clock_gettime64 call instead for rv32 libgloss.
This patch adds support for Armv8-R AArch64.
Armv8-R AArch64 has no EL3, so we don't set vbar_el3, and adjust the
code to set up the MPU for Armv8-R. So build a different flavour of the
startup code to support that.
We also add a specs file that uses this alternative startup code which
can be used with Armv8-R AArch64 models.
The MSP430 target supports both 16-bit and 20-bit size_t and intptr_t.
Some implicit casts in Newlib expect these types to be
"long", (a 32-bit type on MSP430) which causes warnings during
compilation such as:
"cast from pointer to integer of different size"
The main memory region of the GDB simulator ends at address 0xFFBF,
but the simulator linker scripts do not make full use of this available
memory.
>From 61f3d212741acee583e21ff2c2808775584ecad6 Mon Sep 17 00:00:00 2001
From: Jozef Lawrynowicz <jozef.l@mittosystems.com>
Date: Mon, 3 Aug 2020 19:38:23 +0100
Subject: [PATCH 2/2] MSP430: Increase the amount of main memory available in
sim ld scripts
The main memory region of the GDB simulator ends at address 0xFFBF,
but the simulator linker scripts do not make full use of this available
memory.
__{preinit,init,fini}_array_start symbols must be word aligned in
linker scripts. If the section preceding the __*_array_start symbol
has an odd size, then a NULL byte will be present between the start
symbol and the .*_array section itself, when the section gets
automatically word-aligned.
This results in a branch to an invalid address when the CRT startup
code tries to run through the functions listed in the array sections.
>From de115144d05ecbaa82c9c737cc261715ca4b7d67 Mon Sep 17 00:00:00 2001
From: Jozef Lawrynowicz <jozef.l@mittosystems.com>
Date: Mon, 3 Aug 2020 19:09:46 +0100
Subject: [PATCH 1/2] MSP430: Word align __*_array_start symbols in sim linker
scripts
__{preinit,init,fini}_array_start symbols must be word aligned in
linker scripts. If the section preceding the __*_array_start symbol
has an odd size, then a NULL byte will be present between the start
symbol and the .*_array section itself, when the section gets
automatically word-aligned.
This results in a branch to an invalid address when the CRT startup
code tries to run through the functions listed in the array sections.
In the initial code I missed one level of pointer indirection. Instead
of storing errno in impure_data, _impure_ptr was corrupted.
Only simulator is impacted. Real targets have no OS and no syscalls.
This resolves a bunch of stdio cases from the GCC testsuite:
FAIL->PASS: gcc.c-torture/execute/printf-2.c -O0 execution test
Signed-off-by: Dimitar Dimitrov <dimitar@dinux.eu>
Most code in newlib already uses unified syntax, but just a couple of
laggards remain. This patch removes these and means the the entire
code base has now been converted.
Previously, __internal_syscall() compiled into asm-code that unconditionally
sets the syscall argument registers a0 to a5.
For example, the instruction sequence for a exit syscall looked like
this:
li a0, 1 # in ther caller of exit()
# ... # in newlib:
li a1, 0 # unused arguments
li a2, 0
li a3, 0
li a4, 0
li a5, 0
li a7, 93 # exit syscall number
(i.e. the binary contains then 5 superfluous instructions for this
one argument syscall)
This commit changes the RISC-V syscall code such that only the required
syscall argument registers are set.
GCC detects that argc is known at compile time and thus evaluates all the
if-statements where argc is used at compile time (tested with -O2 and -Os).
Mike Frysinger
Jeff Law
Dimitar Dimitrov
Lewis Revill
Christoph Muellner
Stafford Horne
Kito Cheng
Yeting Kuo
Craig Blackmore
Alex Coplan via Newlib
Jojo R
Jozef Lawrynowicz
Richard Earnshaw
Georg Sauthoff