struct sigaction is POSIX.1-1990 but siginfo_t, which is used by its
sa_sigaction member, is POSIX.1b-1993. Therefore it needs to be guarded
as well, and as part of a union, the struct size is protected.
Signed-off-by: Yaakov Selkowitz <yselkowi@redhat.com>
Error messages of regtool can't be read, which are encoded in,
for instance, SHIFT_JIS in Japanese Windows. Fix by using
wide chars instead of multibyte.
When SA_RESTART is not set on a socket, a blocking send() that is
interrupted mid-transition by a signal should return success (and
report just how many bytes were actually transmitted).
The err variable used here was not always guaranteed to be set
correctly in the loop, so better to just remove it and call
WSAGetLastError() explicitly.
There are two common sigpause variants, both of which take an int argument.
If you request _XOPEN_SOURCE or _GNU_SOURCE, you get the System V version,
which removes the given signal from the process's signal mask; otherwise
you get the BSD version, which sets the process's signal mask to the given
value.
Signed-off-by: Yaakov Selkowitz <yselkowi@redhat.com>
So far Cygwin's readdir returned the inode number of a mount target
in d_ino, rather than the actual inode number of the mount point in
the underlying filesystem. This not only results in a performance
hit if the mount target is a remote FS, it is also not done on other
POSIX systems.
Remove the code evaluating the mount target inode number.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
This patch fixes a minor compatibility issue w/ cygwin mount point handling in
readdir(), compared to equivalent behavior of Linux and MacOS. dentry.d_ino
should indicate the INO of the mount point itself, not the target volume root
folder.
Changed return type from readdir_check_reparse_point to uint8_t, to avoid
unnecessarily being implicitly cast to and from a signed int.
Renamed a related local variable "attr" to "oattr" that was eclipsing a member
variable with the same name.
Joe L.
Mingw-w64 (where the code has been taken from) has 4 byte longs
independently of the architecture but x86_64 Cygwin has 64 bit longs.
So use fistpll instead of fistpl on x86_64 Cygwin.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Workaround a bug (or undocumented behaviour) in LCMapStringW:
It's documented(*) that the cchDest parameter is a byte count with
LCMAP_SORTKEY, but a character count otherwise. But the docs don't
state what happens if you combine LCMAP_SORTKEY with LCMAP_BYTEREV.
Tests indicate that LCMAP_SORTKEY treats cchDest as byte count, but
then LCMAP_BYTEREV treats it as char count in the same call. So the
latter swaps twice as much bytes in the destination buffer than the
byte count it returns, which potentially results in writing past the
end of the given output buffer.
Solution: Don't specify LCMAP_BYTEREV in the LCMapStringW(LCMAP_SORTKEY)
call, rather byte swap afterwards.
(*) https://msdn.microsoft.com/en-us/library/windows/desktop/dd318702(v=vs.85).aspx
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
This leads to excessive lag when stracing processes if the inferior
process checks the process table. The reason is that ppid isn't set
in the procinfo memory of the dynamically loading strace itself.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Add new SYMBOLIC_LINK_FLAG_ALLOW_UNPRIVILEGED_CREATE flag to
CreateSymbolicLinkW call when running on W10 1703 or later.
Don't do that on older versions to avoid ERROR_INVALID_PARAMETER.
Preliminary, needs testing. There's an off-chance that the
flag results in the same ERROR_INVALID_PARAMETER on 1703 if the
developer settings are not enabled.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
RtlGetNtVersionNumbers returns the build number with some upper bits
set for no apparent reason. The fact that RtlGetNtVersionNumbers is
undocumented doesn't exactly help.
Just filter out the upper WORD for now. If build numbers are in
danger to become 6 digit numbers, re-evaluate.
Always retrieve FileCompressionInformation for non-empty
files if FileStandardInformation returns 0 allocated blocks.
This fixes stat.st_blocks for files compressed with CompactOS method.
Signed-off-by: Christian Franke <franke@computer.org>
Also:
Remove obsolete reference to g-b-s
Remove mention of ancient pre-invisiconsole behaviour of setup scripts
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Recent versions of gcc are optimizing away the TLS buffer allocated in
main, so we need to tell gcc that it's really used. RtlSecureZeroMemory
accomplishes this while also inlining the memset.
Signed-off-by: Daniel Santos <daniel.santos@pobox.com>
previous commit 4c90db7bc8 introduced
a compile time error because libm/common/s_infconst.c used the remove
__fmath, __dmath, and __ldmath union types.
Since this is very old, and unused for a very long time, just drop the
file and thus the __infinity constants entirely.
Exception: Cygwin exports __infinity from the beginning. There's a very,
VERY low probability that any existing executable or lib still uses this
constant, but we just keep it in for backward compat, nevertheless.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Explicitly format the contents of /proc/loadavg to avoid the decimal point
getting localized according to LC_NUMERIC. Using anything other than '.' is
wrong and breaks top.
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Ensure that ldd always stops when the exception is flagged as
non-continuable.
Also arrange for ldd to exit with a non-zero exit code if something went
wrong which prevented us from listing all dynamic dependencies.
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
v2:
autoload PerfDataHelper functions
Keep loadavg in shared memory
Guard loadavg access by a mutex
Initialize loadavg to the current load
v3:
Shared memory version bump isn't needed if we are only extending it
Remove unused autoload
Mark inititalized flags as NO_COPY for correct behaviour in fork child
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
_log/_vlog were always called so we always had a function call hit even
if we're not debugging. Expand on the debugging macros so the decision
to call _log/_vlog is done in the caller already. Also, make a log level
difference between syscall_printf and system_printf.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The current implementation is a very simple approach to implement
a statically sized sleep queue. The problem is that this code requires
a certain amount of synchronization because the slots in the queue are
used dynamically. To top it off, the Event objects used for sync'ing
are created and destroyed on demand. This is complicated, slow, and
error prone.
There's also a blatant bug here: The number of slots in the queue was
wrongly computed in size. It was too small if XSI IPC was used a lot.
Make the code more robust. Let the queue have the right size. Every
slot is now used for a specific IPC object. All sync objects (switched
to Semaphores) are only created when first required, but never destroyed.
This reduces the usage of a critical section to the creation of a new
sync object.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The number of threads in the worker pool is fixed so far. This is a
problem in XSI IPC scenarions with an unknown number of consumers.
It doesn't make sense to make the pool very big for a start, but when
the need arises, we need to make sure we can serve the request even if
all other worker threads are in a wait state.
This patch changes threaded_queue to just add another worker thread
if all current workers are busy.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The locale_t type is provided by <xlocale.h> on Linux, FreeBSD, and Darwin.
While, like on some of those systems, it is automatically included by
<locale.h> with the proper feature test macros, its presence under this
particular name is still presumed in real-world software.
Signed-off-by: Yaakov Selkowitz <yselkowi@redhat.com>
The original dll_init code was living under the wrong assumption that
dll_dllcrt0_1 and in turn dll_list::alloc will be called for each
LoadLibrary call. The same wrong assumption was made for
cygwin_detach_dll/dll_list::detach called via FreeLibrary.
In reality, dll_dllcrt0_1 gets only called once at first LoadLibrary
and cygwin_detach_dll once at last FreeLibrary.
In effect, reference counting for DLLs was completely broken after fork:
parent:
l1 = dlopen ("lib1"); // LoadLibrary, LoadCount = 1
l2 = dlopen ("lib1"); // LoadLibrary, LoadCount = 2
fork (); // LoadLibrary in the child, LoadCount = 1!
child:
dlclose (l1); // FreeLibrary actually frees the lib
x = dlsym (l2); // SEGV
* Move reference counting to dlopen/dlclose since only those functions
have to keep track of loading/unloading DLLs in the application context.
* Remove broken accounting code from dll_list::alloc and dll_list::detach.
* Fix error handling in dlclose.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Windows NUL device returns only the lower 32 bit of the number of
bytes written. Implement a fake write function to ignore the underlying
NUL device.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
So far we copy *_impure_ptr into _main_tls->local_clib if the child
process has been forked from a pthread. But that's not required.
The local_clib area of the new thread is on the stack and the stack
gets copied from the parent anyway (in frok::parent). So we only
have to make sure _main_tls is pointing to the right address and
do the simple post-fork thread init.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
This test was broken from the start. It leads to creating a completely
new stack for the main thread of the child process when started from
the main thread of the parent. However, the main thread of a process
can easily running on a completely different stack, if the parent's main
thread was created by calling fork() from a pthread. For an example,
see https://cygwin.com/ml/cygwin/2017-03/msg00113.html
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
We use errno AKA _REENT->_errno since the last century and only set
_impure_ptr->_errno for backward compat. Stop that. Also, remove
the last check for _impure_ptr->_errno in Cygwin code.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Note that this always returns with dli_sname and dli_saddr set to NULL,
indicating no symbol matching addr could be found.
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
POSIX states as follows about pthread_cond_wait:
If a signal is delivered to a thread waiting for a condition variable,
upon return from the signal handler the thread resumes waiting for the
condition variable as if it was not interrupted, or it returns zero
due to spurious wakeup.
Cygwin so far employs the latter behaviour, while Linux and BSD employ
the former one.
Align Cygwin behaviour to Linux and BSD.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
There are certain, very obscure scenarios, which render the Windows
CWD handle inaccessible for reopening. An easy one is, the handle can
be NULL if the permissions of the CWD changed under the parent processes
feet.
Originally we just set errno and returned, but in case of init at
process startup that left the "posix" member NULL and subsequent
calls to getcwd failed with EFAULT.
We now check for a NULL handle and change the reopen approach
accordingly. If that doesn't work, try to duplicate the handle instead.
If duplicating fails, too, we set the dir handle to NULL and carry on.
This will at least set posix to some valid path and subsequent getcwd
calls won't fail. A NULL dir handle is ok, because we already do this
for virtual paths.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
This patch alters the behaviour of dll_list::topsort to preserve the
order of dlopen'd units.
The load order of unrelated DLLs is reversed every time fork is called,
since dll_list::topsort finds the tail of the list and then unwinds to
reinsert items. My change takes advantage of what should be undefined
behaviour in dll_list::populate_deps (ndeps non-zero and ndeps and deps
not initialised) to allow the deps field to be initialised prior to the
call and appended to, rather than overwritten.
All DLLs which have been dlopen'd have their deps list initialised with
the list of all previously dlopen'd units. These extra dependencies mean
that the unwind preserves the order of dlopen'd units.
The motivation for this is the FlexDLL linker used in OCaml. The FlexDLL
linker allows a dlopen'd unit to refer to symbols in previously dlopen'd
units and it resolves these symbols in DllMain before anything else has
initialised (including the Cygwin DLL). This means that dependencies may
exist between dlopen'd units (which the OCaml runtime system
understands) but which Windows is unaware of. During fork, the
process-level table which FlexDLL uses to get the symbol table of each
DLL is copied over but because the load order of dlopen'd DLLs is
reversed, it is possible for FlexDLL to attempt to access memory in the
DLL before it has been loaded and hence it fails with an access
violation. Because the list is reversed on each call to fork, it means
that a subsequent call to fork puts the DLLs back into the correct
order, hence "even" invocations of fork work!
An interesting side-effect is that this only occurs if the DLLs load at
their preferred base address - if they have to be rebased, then FlexDLL
works because at the time that the dependent unit is loaded out of
order, there is still in memory the "dummy" DONT_RESOLVE_DLL_REFERENCES
version of the dependency which, as it happens, will contain the correct
symbol table in the data section. For my tests, this initially appeared
to be an x86-only problem, but that was only because the two DLLs on x64
should have been rebased.
Signed-off-by: David Allsopp <david.allsopp@metastack.com>
Match glibc behaviour to expose the public bswap_* macros only with an
explicity #include <byteswap.h>; #include'ing <endian.h> should not expose
them.
Signed-off-by: Yaakov Selkowitz <yselkowi@redhat.com>
Give more elements ids, so random ids aren't assigned to them, so anchors
are stable between builds.
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Don't set SO_RCVBUF/SO_SNDBUF to fixed values, thus disabling autotuning.
Patch modeled after a patch suggestion from Daniel Havey <dhavey@gmail.com>
in https://cygwin.com/ml/cygwin-patches/2017-q1/msg00010.html:
At Windows we love what you are doing with Cygwin. However, we have
been getting reports from our hardware vendors that iperf is slow on
Windows. Iperf is of course compiled against the cygwin1.dll and we
believe we have traced the problem down to the function fdsock in
net.cc. SO_RCVBUF and SO_SNDBUF are being manually set. The comments
indicate that the idea was to increase the buffer size, but, this code
must have been written long ago because Windows has used autotuning
for a very long time now. Please do not manually set SO_RCVBUF or
SO_SNDBUF as this will limit your internet speed.
I am providing a patch, an STC and my cygcheck -svr output. Hope we
can fix this. Please let me know if I can help further.
Simple Test Case:
I have a script that pings 4 times and then iperfs for 10 seconds to
debit.k-net.fr
With patch
$ bash buffer_test.sh 178.250.209.22
usage: bash buffer_test.sh <iperf server name>
Pinging 178.250.209.22 with 32 bytes of data:
Reply from 178.250.209.22: bytes=32 time=167ms TTL=34
Reply from 178.250.209.22: bytes=32 time=173ms TTL=34
Reply from 178.250.209.22: bytes=32 time=173ms TTL=34
Reply from 178.250.209.22: bytes=32 time=169ms TTL=34
Ping statistics for 178.250.209.22:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 167ms, Maximum = 173ms, Average = 170ms
------------------------------------------------------------
Client connecting to 178.250.209.22, TCP port 5001
TCP window size: 64.0 KByte (default)
------------------------------------------------------------
[ 3] local 10.137.196.108 port 58512 connected with 178.250.209.22 port 5001
[ ID] Interval Transfer Bandwidth
[ 3] 0.0- 1.0 sec 768 KBytes 6.29 Mbits/sec
[ 3] 1.0- 2.0 sec 9.25 MBytes 77.6 Mbits/sec
[ 3] 2.0- 3.0 sec 18.0 MBytes 151 Mbits/sec
[ 3] 3.0- 4.0 sec 18.0 MBytes 151 Mbits/sec
[ 3] 4.0- 5.0 sec 18.0 MBytes 151 Mbits/sec
[ 3] 5.0- 6.0 sec 18.0 MBytes 151 Mbits/sec
[ 3] 6.0- 7.0 sec 18.0 MBytes 151 Mbits/sec
[ 3] 7.0- 8.0 sec 18.0 MBytes 151 Mbits/sec
[ 3] 8.0- 9.0 sec 18.0 MBytes 151 Mbits/sec
[ 3] 9.0-10.0 sec 18.0 MBytes 151 Mbits/sec
[ 3] 0.0-10.0 sec 154 MBytes 129 Mbits/sec
Without patch:
dahavey@DMH-DESKTOP ~
$ bash buffer_test.sh 178.250.209.22
Pinging 178.250.209.22 with 32 bytes of data:
Reply from 178.250.209.22: bytes=32 time=168ms TTL=34
Reply from 178.250.209.22: bytes=32 time=167ms TTL=34
Reply from 178.250.209.22: bytes=32 time=170ms TTL=34
Reply from 178.250.209.22: bytes=32 time=169ms TTL=34
Ping statistics for 178.250.209.22:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 167ms, Maximum = 170ms, Average = 168ms
------------------------------------------------------------
Client connecting to 178.250.209.22, TCP port 5001
TCP window size: 208 KByte (default)
------------------------------------------------------------
[ 3] local 10.137.196.108 port 58443 connected with 178.250.209.22 port 5001
[ ID] Interval Transfer Bandwidth
[ 3] 0.0- 1.0 sec 512 KBytes 4.19 Mbits/sec
[ 3] 1.0- 2.0 sec 1.50 MBytes 12.6 Mbits/sec
[ 3] 2.0- 3.0 sec 1.50 MBytes 12.6 Mbits/sec
[ 3] 3.0- 4.0 sec 1.50 MBytes 12.6 Mbits/sec
[ 3] 4.0- 5.0 sec 1.50 MBytes 12.6 Mbits/sec
[ 3] 5.0- 6.0 sec 1.50 MBytes 12.6 Mbits/sec
[ 3] 6.0- 7.0 sec 1.50 MBytes 12.6 Mbits/sec
[ 3] 7.0- 8.0 sec 1.50 MBytes 12.6 Mbits/sec
[ 3] 8.0- 9.0 sec 1.50 MBytes 12.6 Mbits/sec
[ 3] 9.0-10.0 sec 1.50 MBytes 12.6 Mbits/sec
[ 3] 0.0-10.1 sec 14.1 MBytes 11.7 Mbits/sec
The output shows that the RTT from my machine to the iperf server is
similar in both cases (about 170ms) however with the patch the
throughput averages 129 Mbps while without the patch the throughput
only averages 11.7 Mbps. If we calculate the maximum throughput using
Bandwidth = Queue/RTT we get (212992 * 8)/0.170 = 10.0231 Mbps. This
is just about what iperf is showing us without the patch since the
buffer size is set to 212992 I believe that the buffer size is
limiting the throughput. With the patch we have no buffer limitation
(autotuning) and can develop the full potential bandwidth on the link.
If you want to duplicate the STC you will have to find an iperf server
(I found an extreme case) that has a large enough RTT distance from
you and try a few times. I get varying results depending on Internet
traffic but without the patch never exceed the limit caused by the
buffering.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The form data sent to the server should be application/x-www-form-urlencoded
This replaces spaces with '+' before being RFC 1738 encoded, so a literal
'+' must be %-encoded also.
See https://cygwin.com/ml/cygwin/2014-01/msg00287.html et seq.
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
The termios code doesn't handle erasing of multibyte characters
in canonical mode, it always erases a single byte. When entering
a multibyte character and then pressing VERASE, the input ends up
with an invalid character.
Following Linux we introduce the IUTF8 input flag now, set by
default. When this flag is set, VERASE or VWERASE will check
if the just erased input byte is a UTF-8 continuation byte. If
so, it erases another byte and checks again until the entire
UTF-8 character has been removed from the input buffer.
Note that this (just as on Linux) does NOT work with arbitrary
multibyte codesets. This only works with UTF-8.
For a discussion what happens, see
https://cygwin.com/ml/cygwin/2017-01/msg00299.html
Sidenote: The eat_readahead function is now member of fhandler_termios,
not fhandler_base. That's necessary to get access to the terminal's
termios flags.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- Drop virtual_key_code (only used once)
- Convert macros wch and control_key_state to const vars
unicode_char and ctrl_key_state.
- Fix formatting
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Create two new inline functions is_alt_numpad_key(PINPUT_RECORD) and
is_alt_numpad_event(PINPUT_RECORD) which contain the actual checks.
Call these functions from fhandler_console::read and peek_console for
better readability.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
{p}select/{p}poll completely ignored Alt+Numpad key sequences in console
input which results in newer readline using pselect to fail handling such
sequences correctly. See https://cygwin.com/ml/cygwin/2017-01/msg00135.html
During debugging and testing it turned out that while reading console
input, single key presses during an Alt+Numpad sequences where not
ignored, so ultimately a sequence like
Alt-down Numpad-1 Numpad-2 Numpad-3
whihc is supposed to result in a single character in the input stream
will actually result in 4 chars in the input stream, three control
sequences and the actual character.
Both problems should be fixed by this patch.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
This patch fixes the following problem:
Commit 9636c426 refactored the pipe code especially to make sure
to call WriteFile only with chunks matching the maximum atomic write
count. This accidentally introduced a small change in behaviour
on blocking pipes due to the success case falling through into the
error case. Rather then writing atomic chunks until all bytes are
written, the code immediately broke from the loop after writing
the first chunk, basically the same as in case of non-blocking
writes. This behaviour is not compliant to POSIX which requires
"Write requests to a pipe or FIFO [...]
* If the O_NONBLOCK flag is clear, a write request may cause the
thread to block, but on normal completion it shall return nbyte."
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
If newfile already exists and is in use, trying to overwrite it with
NtSetInformationFile(FileRenameInformation) fails exactly as if we
don't have the permissions to delete it. Unfortunately the return code
is the same STATUS_ACCESS_DENIED, so we have no way to distinguish
these cases. What we do here so far is to start a transaction to delete
newfile. If this open fails with a transactional error we stop the
transaction and retry opening the file without transaction.
But, here's the problem: If newfile is in use, NtOpenFile(oldfile)
naturally does NOT fail with a transactional error. Rather, the
subsequent call to unlink_nt(newfile) does, because there's another
handle open to newfile outside a transaction. However, the code does
not check if unlink_nt fails with a transactional error and so fails
to retry without transaction.
This patch recifies the problem and checks unlink_nt's status as well.
Refactor code to get rid of goto into another code block.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
A *very* recent Windows build adds more code to the preamble of
RtlGetCurrentDirectory_U() so that the previous heuristic failed to find
the call to the locking routine.
This only affects the 64-bit version of ntdll, where the 0xe8 byte is
now found at offset 40, not the 32-bit version. However, let's just
double the area we search for said byte for good measure.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Returns the process's environment concatenated into a single block of
null-terminated strings, along with the length of the environment block.
Adds an associated PICOM_ENVIRON commune_process handler.
win32env_to_cygwenv handles converting wchar to char and some other
minor taks. Optionally it handles converting any paths in variables to
posix paths.
This will be useful for implementing /proc/<pid>/environ
commit 67fd2101 introduced a bad bug. Changing sys_privs to a static
area and just returning a pointer is nice... *if* the calling code doesn't
call free() on it. Make sure callers check pointer for sys_privs and
refrain from calling free, if so.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
GNU no longer encourages the use of documentation mirrors, to avoid
referring to obsolete documentation. Also www.fsf.org/manual/ is
just a redirect to www.gnu.org/manual/
Links to using-utils.html #fragments are no longer correct as each utility
is now a separate page, since 646745cb.
indiana.edu seems to have moved XLiveCD information, without a redirect.
Linking to clean_setup.pl on cygwin.com doesn't work, as direct downloads
aren't allowed, so instead state where it can be found on a mirror.
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Include ntsecapi.h where required and just redefine RtlGenRandom
correctly in the ntsecapi.h wrapper.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
In preparation of exporting getentropy/getrandom to userspace, rearrange
code a bit:
- Define RtlGenRandom in ntdll.h.
- Drop calls to getentropy in favor of RtlGenRandom (fhandler_socket,
fhandler_dev_random).
- Add try/except blocks in fhandler_dev_random to return EFAULT rather
than crashing if buffer pointer is invalid.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
NtOpenFile/NtCreateFile on non-existent paths on network drives has a
bug. Assuming a path Z:\dir\file. Further assuming that Z:\dir does
not exist.
The first NtOpenFile("Z:\dir\file") correctly returns
STATUS_OBJECT_PATH_NOT_FOUND. Subsequent calls incorrectly
return STATUS_OBJECT_NAME_NOT_FOUND.
This appears to be some kind of caching behaviour. Waiting a while
before repeating the call correctly returns STATUS_OBJECT_PATH_NOT_FOUND
again.
This patch works around the observed misbehaviour.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
So far, when converting from POSIX to Windows notation, cygwin_conv_path
fails to check for .exe suffix, so /path/foo did not return /path/foo.exe
even if this file exists.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The original code only skipped the "./", but missed to test if more
trailing slashes are present. This in turn leads to invalid conversion.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Corinna Vinschen
Yaakov Selkowitz
David Macek
Brian Inglis
Sebastian Huber
Jon Turney
Fujii Hironori
Joe_Lowe
Erik M. Bray
Christian Franke
Daniel Santos
Mark Geisert
David Allsopp
Michael Haubenwallner
Kenneth Nellis
Johannes Schindelin
Erik M. Bray