Commit Graph

444 Commits

Author SHA1 Message Date
Jeff Johnston aa26b78462 or1k: UART also accept timeout interrupt
- The UART interrupt only handled receiver FIFO full interrupts, but we
  also want to handle timeout interrupts.

    * or1k/or1k_uart.c: Fix interrupts
2015-05-27 13:30:20 +02:00
Jeff Johnston 58e5719a0e Bug fix in timer for or1k
- Properly set the interrupt pending flag in the timer mode register.

    * or1k/timer.c: Properly set interrupt flags
2015-05-27 13:30:20 +02:00
Jeff Johnston b46d3b5536 Store entire context for or1k
- Store the exception program counter (from EPCR) and exception status
  register (from ESR) also during the exception. A runtime system may
  replace them thereby to implement a thread switch.

    * or1k/exception-asm.S: Store missing state
2015-05-27 13:30:20 +02:00
Jeff Johnston a6342974b0 Fix exception stack frame for or1k
- We do not need a red zone here, as we do not operate on the current
  stack, but always use the clear exception stack. Also reserve two
  extra words for the context to store EPCR and ESR.

    * or1k/crt0.S: Fix exception stack frame
    * or1k/exception-asm.S: ditto
2015-05-27 13:30:19 +02:00
Jeff Johnston 132030fcf2 Fix interrupt handling for or1k.
- During interrupt handling the PICSR, table pointers and current
  interrupt line have been saved in incorrect registers and/or stored on
  the stack.

- Save the pointer in r16/r18, PICSR in r20 and the current interrupt
  line in r22. Those are callee-saved registers, so that the register
  values will be preserved.

        * or1k/interruts-asm.S: Change registers to callee-saved.
2015-05-27 13:30:19 +02:00
Nick Clifton 324bd11706 Add a check that the data area does not overrun the stack.
* msp430/msp430-sim.ld (.stack): Add an assertion to make sure
	that the data area does not overrun the stack.  PROVIDE a new
	symbol __stack_size to allow the user to set the limit.
	* msp430/msp430xl-sim.ld (.stack): Likewise.
	* rl78/rl78-sim.ld (.stack): Likewise.
	* rl78/rl78.ld (.stack): Likewise.
	* rx/rx-sim.ld (.stack): Likewise.
	* rx/rx.ld (.stack): Likewise.
2015-05-27 13:30:19 +02:00
Nick Clifton baa681fd38 Adds support for placing MSP430 code and data into either low memory or high memory.
* msp430/msp430.ld: Delete.
	* msp430/msp430F5438A-l.ld: Delete.
	* msp430/msp430F5438A-s.ld: Delete.
	* msp430/crt_movedata.S: Delete.

	* msp430/Makefile.in (SCRIPTS): Remove msp430.ld.
	(CRT_OBJS): Add crt_move_highdata.o.
	* msp430/memmodel.h (START_CRT_FUNC): New macro.
	(END_CRT_FUNC): New macro.
	(WEAK_DEF): New macro.
	* msp430/crt0.S: Use new macros.
	(move_highdata): New code to initialise the .data section if it is
	held in high memory.

	* msp430/msp430-sim.ld (.data): Add .either.data.
	(.rodata2): Move some read-only data sections here.
	(.text): Add .either.text.
	(.rodata): Add .either.rodata.
	(.bss): Add .either.bss.
	* msp430/msp430xl-sim.ld (MEMORY): Add HIROM.
	(.rodata2): Move some read-only data sections here.
	(.upper.data): New section.  Include notes about how to initialise
	it.
2015-05-27 13:30:19 +02:00
Mike Frysinger e6101f3008 libgloss: mcore: add custom syscall header
The mcore simulator has a unique set of syscall numbers.  Add a header
that matches reality since the common one doesn't.
2015-04-23 22:03:45 +02:00
Mike Frysinger 6803327326 libgloss: arm: fix copy & paste in syscall.h
This header was clearly copied from the common syscall.h and customized,
but the header comment is no longer accurate -- this isn't the general
file anymore.
2015-04-23 22:03:45 +02:00
Nick Clifton cd0d459135 For the RX port, avoid using string instructions when __RX_DISALLOW_STRING_INSNS__ is defined.
* rx/crt0.S (_start): If string instructions are not allowed,
	avoid using SMOVF.

	* libc/machine/rx/memchr.S: Add non-string insn using version.
	* libc/machine/rx/memcpy.S: Likewise.
	* libc/machine/rx/memmove.S: Likewise.
	* libc/machine/rx/mempcpy.S: Likewise.
	* libc/machine/rx/strcat.S: Likewise.
	* libc/machine/rx/strcmp.S: Likewise.
	* libc/machine/rx/strcpy.S: Likewise.
	* libc/machine/rx/strlen.S: Likewise.
	* libc/machine/rx/strncat.S: Likewise.
	* libc/machine/rx/strncmp.S: Likewise.
	* libc/machine/rx/strncpy.S: Likewise.
2015-04-23 21:57:13 +02:00
Nick Clifton 45d0b17928 Add .note and DWARF3 sections to RX linker scripts.
* rx/rx.ld: Add .note and DWARF3 sections.
	* rx/rx-sim.ld: Likewise.
2015-04-23 21:57:13 +02:00
Nick Clifton 61a2d9dedb Always include the .csstart section in RL78 executables.
* rl78/rl78.ld (.csstart): Add a KEEP directive.
	* rl78/rl78-sim.ld (.csstart): Add a KEEP directive.
2015-04-23 21:57:12 +02:00
Nick Clifton e185d3febe * v850/sim.ld: Add a .note.renesas section. 2015-03-05 11:26:59 +00:00
Corinna Vinschen 8d98f956cc * arm/crt0.S: Initialise __heap_limit when ARM_RDI_MONITOR is defined.
* arm/syscalls.c: define __heap_limit global symbol.
	* arm/syscalls.c (_sbrk): Honour __heap_limit.
2015-02-17 09:30:52 +00:00
Corinna Vinschen 19e714bcee * or1k/or1k_uart.c: Write bugfix and cleanup/documentation.
* or1k/or1k_uart.h: Cleanup.
2015-02-11 13:33:40 +00:00
Yaakov Selkowitz 5ae2368e92 * sparc/crt0.S: Declare use of system registers.
* sparc/cygmon-crt0.S: Ditto.
* sparc/erc32-crt0.S: Ditto.
* sparc/traps.S: Ditto.
2015-01-22 17:38:39 +00:00
Eric Botcazou bf8f43ae8a * COPYING.LIBGLOSS: Add Controls and Data Services copyright.
* COPYING.NEWLIB: Likewise.
libgloss/
	* configure.in: Add Visium support.
	* configure: Regenerate.
	* visium/: New directory.
newlib/
	* configure.host: Add Visium support.
	* libc/machine/configure.in: Likewise.
	* libc/machine/configure: Regenerate.
	* libc/machine/visium/: New directory.
	* libc/include/machine/setjmp.h (_JBLEN): Define for Visium.
	* libc/include/machine/ieeefp.h (__IEEE_BIG_ENDIAN): Likewise.
	* libc/include/machine/time.h (_CLOCKS_PER_SEC_): Likewise.
2015-01-21 18:27:47 +00:00
DJ Delorie 70e52cba1b * rl78/crt0.S: Initialize .saddr. Avoid using SEL.
* rl78/rl78-sim.ld: Add .saddr/.frodata section.
* rl78/rl78.ld: Likewise.
* rl78/rl78-sim.ld: Make room for virtual register banks.
* rl78/rl78.ld: Likewise.

* rl78/vregs.h: New.
* rl78-sys.h: Use it.
* rl78/swrite.S: New.
* rl78/Makefile.in: Build it.
* rl78/write.c: Use it.
2015-01-16 22:21:34 +00:00
Corinna Vinschen f91272b8c2 * or1k/include/or1k-sprs.h: New auto-generated header file. 2015-01-14 09:56:02 +00:00
Jeff Johnston ba913653a6 2015-01-05 Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
* lm32/Makefile.in (install): Respect DESTDIR.
        (install-scripts): Ditto.
        * mep/Makefile.in (install): Ditto.
        * mt/Makefile.in (install): Ditto.
        * rl78/Makefile.in (install): Ditto.
2015-01-05 17:36:34 +00:00
Anthony Green 47c98af2ba The moxie sub.l instruction is now just sub. 2014-12-27 12:18:56 +00:00
Jeff Johnston ab42ec30e6 2014-12-15 Stefan Wallentowitz <stefan.wallentowitz@tum.de>
* or1k/Makefile.in: Build and install board libraries
        * or1k/board.h: New file
        * or1k/boards/README: New file
        * or1k/boards/atlys.S: New file
        * or1k/boards/de0_nano.S: New file
        * or1k/boards/ml501.S: New file
        * or1k/boards/ml509.S: New file
        * or1k/boards/optimsoc.S: New file
        * or1k/boards/or1ksim-uart.S: New file
        * or1k/boards/or1ksim.S: New file
        * or1k/boards/ordb1a3pe1500.S: New file
        * or1k/boards/ordb2a.S: New file
        * or1k/boards/orpsocrefdesign.S: New file
        * or1k/boards/tmpl.S: New file
        * or1k/boards/tmpl.c: New file
2014-12-15 20:22:28 +00:00
Jeff Johnston 68a9101237 2014-12-15 Stefan Wallentowitz <stefan.wallentowitz@tum.de>
* or1k/Makefile.in: Add libor1k
        * or1k/README: New file
        * or1k/caches-asm.S: New file
        * or1k/exceptions-asm.S: New file
        * or1k/exceptions.c: New file
        * or1k/impure.c: New file
        * or1k/include/or1k-nop.h: New file
        * or1k/include/or1k-support.h: New file
        * or1k/interrupts-asm.S: New file
        * or1k/interrupts.c: New file
        * or1k/mmu-asm.S: New file
        * or1k/or1k-internals.h: New file
        * or1k/or1k_uart.c: New file
        * or1k/or1k_uart.h: New file
        * or1k/outbyte.S: New file
        * or1k/sbrk.c: New file
        * or1k/sync-asm.S: New file
        * or1k/syscalls.c: New file
        * or1k/timer.c: New file
        * or1k/util.c: New file
2014-12-15 20:17:39 +00:00
Jeff Johnston d1219c0e89 2014-12-15 Stefan Wallentowitz <stefan.wallentowitz@tum.de>
* README: Add details about or1k.
        * configure.in: Add or1k/or1knd
        * configure: Regenerated.
        * or1k/aclocal.m4: New file.
        * or1k/configure: Ditto.
        * or1k/Makefile.in: New file
        * or1k/configure.in: New file
        * or1k/crt0.S: New file
        * or1k/include/or1k-asm.h: New file
2014-12-15 20:09:28 +00:00
Corinna Vinschen d4ef8a6368 * libgloss/nds32/_exit.S: Finish with an infinite loop in _exit.
* libgloss/nds32/_getpid.S: Don't issue _getpid system call, it is
	always successful.
	* libgloss/nds32/_gettimeofday.S: No error for _gettimeofday is defined
	in SYS_geterr handler.
	* libgloss/nds32/_isatty.S: No error for _isatty is defined in
	SYS_geterr handler.
	* libgloss/nds32/_kill.S: Alway fail. errno = EINVAL.
	* libgloss/nds32/_link.S: Alway fail. errno =  EMLINK.
	* libgloss/nds32/_times.S: Alway fail. errno = EACCES.
	* libgloss/nds32/_unlink.S: fix copy and paste error.
	* libgloss/nds32/crt0.S: Add pre_c_init, post_c_init, arg_init.
	* libgloss/nds32/crt1.S: Add pre_c_init, post_c_init, arg_init.
	* libgloss/nds32/syscall_extra.h: Re-format.
	* libgloss/nds32/vh.h: Add more virtual hosting number.
2014-12-15 13:30:07 +00:00
Anthony Green 070d1cee7d Rebuilt moxie/configure 2014-12-11 11:54:44 +00:00
Corinna Vinschen b3281dd194 * mips/crt0.S: Configure processor based on .MIPS.abiflags.
Remove FPU availability check, just use the pre-processor flags
	to indicicate what the user wanted.
	* mips/abiflags.S: New file.
	* mips/regs.S (SR_MSA): Define macro.
	* mips/mti32.ld: Place .MIPS.abiflags and wrap in marker symbols.
	* mips/mti64.ld: Likewise.
	* mips/mti64_64.ld: Likewise.
	* mips/mti64_n32.ld: Likewise.
2014-11-28 08:51:03 +00:00
Jeff Johnston 84b2a020da 2014-11-26 Matthew Fortune <Matthew.Fortune@imgtec.com>
* mips/crt0.S: Remove .set noreorder throughout.
        (zerobss): Open code the bltu macro instruction so that the
        zero-loop does not have a NOP in the branch delay slot.
2014-11-27 00:28:09 +00:00
Nick Clifton b7d6a7c805 * msp430/Makefile.in (CRT_OBJS): Add crt_high_bss.o.
* msp430/crt0.S (high_bss): Add.
	* msp430/msp430-sim.ld: Add error message if .upper sections are
	detected.
	* msp430/msp430xl-sim.ld (MEMORY): Adjust to better mimic real
	life MCUs.  Add support for upper and lower sections.
2014-11-13 10:18:57 +00:00
DJ Delorie 787fa74125 2014-10-22 Tim Harder <radhermit@gmail.com>
* msp430/Makefile.in: respect DESTDIR during install
2014-10-23 01:49:49 +00:00
Nick Clifton c30356443e * configure.in: Remove config_libnosys=false
* configure: Regenerated.
	* msp430/nosyscalls.S: Rename to ciosyscalls.S
	* msp430/Makefile.in: Change LIBNOSYS to LIB_CIO.
2014-09-22 15:26:46 +00:00
Corinna Vinschen 433de33ec2 * arm/elf-nano.specs: New file.
* arm/elf-rdimon.specs: Support nano.specs.
	* arm/Makefile.in: Support nano.specs.
	* libnosys/nosys.specs: Support nano.specs.
2014-08-14 15:00:33 +00:00
Anthony Green 0a0f33e501 Add moxiebox support. 2014-07-27 14:37:10 +00:00
Corinna Vinschen 844557c9ed * arm/elf-aprofile-validation.specs (*link): Make text segment
64k-aligned.
	* arm/elf-aprofile-ve.specs (*link): Likewise.
2014-07-16 11:53:34 +00:00
Nick Clifton 179e25f0df * msp430/Makefile.in (NOSYS_OBJS): Add unlink.o.
(SCRIPTS): Remove msp430F5438A-s.ld and msp430F5438A-s.ld.
	* unlink.c: New file.
2014-04-30 11:30:14 +00:00
Jeff Johnston d83d5c7d7b 2014-04-04 Ashish Kapania <akapania@ti.com>
* arm/configure.in: (*-*-tirtos*) Accept TIRTOS target when setting
        objtype
        * arm/configure: Regenerated.
2014-04-04 21:43:55 +00:00
Jeff Johnston e669b401f7 2014-03-21 Sabrini Ni <sabrinanitw@gmail.com>
* nds32/_sbrk.S: Add .size and .type directive.
2014-03-21 21:17:43 +00:00
Jeff Johnston c94fff60f1 2014-03-21 Sabrini Ni <sabrinanitw@gmail.com>
* nds32/crt0.S: Tweak initialization sqeuence.
        * nds32/crt1.S: Ditto.
2014-03-21 21:16:40 +00:00
Jeff Johnston 23cf8028ec 2014-03-21 Sabrini Ni <sabrinanitw@gmail.com>
* nds32/_argv.S: Replace syscall with break.
        * nds32/_argvlen.S: Ditto.
        * nds32/_chdir.S: Ditto.
        * nds32/_chmod.S: Ditto.
        * nds32/_close.S: Ditto.
        * nds32/_exit.S: Ditto.
        * nds32/_fstat.S: Ditto.
        * nds32/_getpid.S: Ditto.
        * nds32/_gettimeofday.S: Ditto.
        * nds32/_isatty.S: Ditto.
        * nds32/_kill.S: Ditto.
        * nds32/_link.S: Ditto.
        * nds32/_lseek.S: Ditto.
        * nds32/_open.S: Ditto.
        * nds32/_read.S: Ditto.
        * nds32/_rename.S: Ditto.
        * nds32/_stat.S: Ditto.
        * nds32/_system.S: Ditto.
        * nds32/_time.S: Ditto.
        * nds32/_times.S: Ditto.
        * nds32/_unlink.S: Ditto.
        * nds32/_utime.S: Ditto.
        * nds32/_write.S: Ditto.
        * nds32/syscall_error_handler.S: Ditto.
        * nds32/vh.h: New.
2014-03-21 21:02:52 +00:00
Jeff Johnston e59026e844 2014-03-21 Sabrini Ni <sabrinanitw@gmail.com>
* nds32/crt0.S: Initialize ITB base.
        * nds32/crt1.S: Ditto.
2014-03-21 20:58:54 +00:00
Jeff Johnston 31b1f3e55f 2014-03-21 Sabrini Ni <sabrinanitw@gmail.com>
* nds32/Makefile.in: Alter filename.
        * nds32/syscall_argv.S: Rename to _argv.S
        * nds32/syscall_argvlen.S: Rename to _argvlen.S
        * nds32/syscall_chdir.S: Rename to _chdir.S
        * nds32/syscall_chmod.S: Rename to _chmod.S
        * nds32/syscall_close.S: Rename to _close.S
        * nds32/syscall_exit.S: Rename to _exit.S
        * nds32/syscall_fstat.S: Rename to _fstat.S
        * nds32/syscall_getpid.S: Rename to _getpid.S
        * nds32/syscall_gettimeofday.S: Rename to _gettimeofday.S
        * nds32/syscall_isatty.S: Rename to _isatty.S
        * nds32/syscall_kill.S: Rename to _kill.S
        * nds32/syscall_link.S: Rename to _link.S
        * nds32/syscall_lseek.S: Rename to _lseek.S
        * nds32/syscall_open.S: Rename to _open.S
        * nds32/syscall_read.S: Rename to _read.S
        * nds32/syscall_rename.S: Rename to _rename.S
        * nds32/syscall_sbrk.S: Rename to _sbrk.S
        * nds32/syscall_stat.S: Rename to _stat.S
        * nds32/syscall_system.S: Rename to _system.S
        * nds32/syscall_time.S: Rename to _time.S
        * nds32/syscall_times.S: Rename to _times.S
        * nds32/syscall_unlink.S: Rename to _unlink.S
        * nds32/syscall_utime.S: Rename to _utime.S
        * nds32/syscall_write.S: Rename to _write.S
2014-03-21 20:55:57 +00:00
Jeff Johnston 8194dcec36 2014-03-21 Sabrini Ni <sabrinanitw@gmail.com>
* nds32/syscall_argv.S: Correct the method to set errno.
        * nds32/syscall_argvlen.S: Ditto.
        * nds32/syscall_chdir.S: Ditto.
        * nds32/syscall_chmod.S: Ditto.
        * nds32/syscall_close.S: Ditto.
        * nds32/syscall_error_handler.S: Ditto.
        * nds32/syscall_fstat.S: Ditto.
        * nds32/syscall_getpid.S: Ditto.
        * nds32/syscall_gettimeofday.S: Ditto.
        * nds32/syscall_isatty.S: Ditto.
        * nds32/syscall_kill.S: Ditto.
        * nds32/syscall_link.S: Ditto.
        * nds32/syscall_lseek.S: Ditto.
        * nds32/syscall_open.S: Ditto.
        * nds32/syscall_read.S: Ditto.
        * nds32/syscall_rename.S: Ditto.
        * nds32/syscall_sbrk.S: Ditto.
        * nds32/syscall_stat.S: Ditto.
        * nds32/syscall_system.S: Ditto.
        * nds32/syscall_time.S: Ditto.
        * nds32/syscall_times.S: Ditto.
        * nds32/syscall_unlink.S: Ditto.
        * nds32/syscall_utime.S: Ditto.
        * nds32/syscall_write.S: Ditto.
2014-03-21 20:34:46 +00:00
Jeff Johnston 488d885bf3 2014-03-21 Sabrini Ni <sabrinanitw@gmail.com>
* nds32/crt0.S: Use pseudo-instruction "bal frame" to replace
        "la + jral".
        * nds32/crt1.S: Ditto.
2014-03-21 20:27:41 +00:00
Jeff Johnston d35d103f08 2014-03-21 Sabrini Ni <sabrinanitw@gmail.com>
* nds32/crt0.S: Eliminate initialization for $fp.
        * nds32/crt1.S: Ditto.
2014-03-21 20:26:01 +00:00
Jeff Johnston b899f01579 2014-03-21 Sabrini Ni <sabrinanitw@gmail.com>
* nds32/crt0.S: Refine.
        * nds32/crt1.S: Refine.
2014-03-21 20:24:04 +00:00
Jeff Johnston 5ff6903e69 2014-03-21 Sabrini Ni <sabrinanitw@gmail.com>
* nds32/crt0.S: Set argc=argv=env=0.
        * nds32/crt1.S: Ditto.
2014-03-21 20:22:29 +00:00
Jeff Johnston 7f4230bdc8 2014-03-21 Sabrini Ni <sabrinanitw@gmail.com>
* nds32/Makefile.in: Add syscall_error_handler.o.
        * nds32/syscall_error_handler.S: New.
        * nds32/syscall_extra.h: Reduce code size.
2014-03-21 20:20:53 +00:00
Jeff Johnston 9246fbeced 2014-03-21 Sabrini Ni <sabrinanitw@gmail.com>
* nds32/syscall_extra.h: Define macro.
        * nds32/syscall_argv.S: Use define macro.
        * nds32/syscall_argvlen.S: Ditto.
        * nds32/syscall_chdir.S: Ditto.
        * nds32/syscall_chmod.S: Ditto.
        * nds32/syscall_close.S: Ditto.
        * nds32/syscall_fstat.S: Ditto.
        * nds32/syscall_getpid.S: Ditto.
        * nds32/syscall_gettimeofday.S: Ditto.
        * nds32/syscall_isatty.S: Ditto.
        * nds32/syscall_kill.S: Ditto.
        * nds32/syscall_link.S: Ditto.
        * nds32/syscall_lseek.S: Ditto.
        * nds32/syscall_open.S: Ditto.
        * nds32/syscall_read.S: Ditto.
        * nds32/syscall_rename.S: Ditto.
        * nds32/syscall_stat.S: Ditto.
        * nds32/syscall_system.S: Ditto.
        * nds32/syscall_time.S: Ditto.
        * nds32/syscall_times.S: Ditto.
        * nds32/syscall_unlink.S: Ditto.
        * nds32/syscall_utime.S: Ditto.
        * nds32/syscall_write.S: Ditto.
2014-03-21 20:16:14 +00:00
Jeff Johnston 065c7717b7 2014-02-27 Joey Ye <joey.ye@arm.com>
* libnosys/sbrk.c (_sbrk): Remove TWS
2014-03-04 17:39:26 +00:00
Jeff Johnston 6a7a80d83c 2014-02-11 Joey Ye <joey.ye@arm.com>
* arm/syscalls.c (_sbrk): Define as weak symbols.
        (_read, _write): Ditto.
2014-02-11 19:55:22 +00:00