The sigpending mechanism failed to check if the pending signal was a
process-wide signal, or a signal for the curent thread. Fix that by
adding a matching conditional to wait_sig's __SIGPENDING code.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
So far sig_send's return type is int. The problem with this is
that sig_send returns a sigset_t on __SIGPENDING, and sigset_t
is defined as long type. So the function only returns the lower
32 bit of sigset_t, which is fine on 32 bit, but casts away the
pending RT signals on 64 bit.
Fix this by changing the return type of sig_send to sigset_t, so
as not to narrow down the sigset when returning from handling
__SIGPENDING. Make sure to cast correctly in all invocations
of sig_send.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Have sched_getaffinity() interface like glibc's, and provide an
undocumented internal interface __sched_getaffinity_sys() like the Linux
kernel's sched_getaffinity() for benefit of taskset(1).
Add a function timerfd_tracker::enter_critical_section_cancelable,
which is like enter_critical_section but honors a cancel event. Call
this when a timer expires while the timerfd thread is in its inner
loop. This avoids a deadlock if timerfd_tracker::dtor has entered its
critical section and is trying to cancel the thread. See
https://cygwin.com/ml/cygwin/2019-06/msg00096.html.
This patch set implements the Linux syscalls sched_getaffinity,
sched_setaffinity, pthread_getaffinity_np, and pthread_setaffinity_np.
Linux has a straightforward view of the cpu sets used in affinity masks.
They are simply long (1024-bit) bit masks. This code emulates that view
while internally dealing with Windows' distribution of available CPUs among
processor groups.
Make it a manual reset event. It's only used once to allow a reader
to open, and there's no reason to ever reset it. Defensively set it
when a client connection is recorded, even though it should be set by
the writer that connected.
Call NtReadFile directly instead of calling fhandler_base::raw_read.
In addition to being simpler, this gives us access to the return value
from NtReadFile.
Add a method fifo_client_handler::pipe_state that queries Windows for
the state of a pipe instance. Use this to help terminate the
listen_client thread cleanly.
If the last client handler is useless, delete it instead of declaring
it invalid.
fhandler_fifo::close could be called from a signal handler or another
thread at a time when another function is holding the fifo_client
lock. This could prevent the listen_client thread from acting on the
thread termination event. Avoid a deadlock by calling
fifo_client_unlock at the beginning of fhandler_fifo::close.
libX11 provides <X11/Xlocale.h>. The build of libX11 itself adds
include/X11 to the compiler's include path. This results in a name
collision with /usr/include/xlocale.h on case-insensitive filesystems.
Commit 90e35b1eb3 renamed sys/_locale.h to xlocale.h in March 2017 under
the assumption that we should provide the locale_t type in the same file
as on Linux, FreeBSD, and Darwin.
A few weeks later (June 2017), glibc removed the xlocale.h file in favor
of bits/types/locale_t.h, which shouldn't be included directly anyway.
For reference and the reasoning, see
https://sourceware.org/git/?p=glibc.git;a=commit;h=f0be25b6336d
Given the above, revert 90e35b1eb3 and
fix additional usage of xlocale.h.
32 bit Cygwin performs a POSIX-compatible mapping after EOF which
is not supported in this form on Windows. The 64 bit Windows
kernel never supported the AT_ROUND_TO_PAGE mapping flag, so we
couldn't page-aligned map the space right after the file's EOF.
So mapping beyond EOF was disabled in 64 bit Windows and WOW64.
However, if mmap works, a matching munmap should work as well,
*and* it should not accidentally unmap unrelated memory.
Therefore we enable mapping beyond EOF on 64 bit as well. Since
that mapping is always 64K aligned, the are between the last file
page and the next 64K allocation boundary will be unallocated.
There's no way around that.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
When using NtCreateFile when creating a directory that already exists,
it will correctly return 'STATUS_OBJECT_NAME_COLLISION'.
However using this function to create a directory (and all its parents)
a normal use would be to start with mkdir(‘/cygdrive/c’) which translates
to ‘C:\’ for which it'll instead return ‘STATUS_ACCESS_DENIED’.
An increasing number of tools are being included in Windows which have the
same names as those included in Cygwin packages. Indicating which one is
first in PATH can be helpful in diagnosing behavioural discrepencies
between them.
Also, fix the alphabetization of ssh.
64 bit Windows started out with a 44 bit address space due to a
restriction of the AMD64 CPUs at the time. Starting with Windows
8.1, these CPUs are not supported anymore and Windows switched to
the full 48 bit address space supported by AMD64.
Cygwin didn't follow suit yet so mmaps are still restricted to
the lower 44 bit address space. Fix that by using a system-specific
upper address for mmap allocations, 44 bit up to Windows 8, 48 bit
starting with Windows 8.1.
While at it, move the heap by another 8 Gigs to leave some space
for a potential extension of DLL address space, and restrict the
mmap lower address so the heap can grow to 32 Gigs before colliding
with mmaps.
Do not remember the child before it was successfully initialized, or we
would need more sophisticated cleanup on child initialization failure,
like cleaning up the process table and suppressing SIGCHILD delivery
with multiple threads ("waitproc") involved. Compared to that, the
potential slowdown due to an extra yield () call should be negligible.
Pause the child process after performing fork fixups even if there were
no dynamically loaded dlls with extra data/bss transfers to wait for.
This allows the parent process to cancel the current fork call even if
the child process was successfully initialized already.
This is a preparation for when the parent does remember the child no
earlier than after successful child initialization.
Querying the ntlength and existence of the /var/run/cygfork directory in
the very first Cygwin process should not use nt_max_path_buf, as that
one is used by dll_list::alloc already.
NtQueryVirtualMemory for MemorySectionName may return some old path even
if the process was just started, for when some directory in between was
renamed - maybe because the NT file cache is hot for the old path still.
This was seen during gcc bootstrap, returning a MemorySectionName of
".../gcc/xgcc.exe" even if started as ".../prev-gcc/xgcc.exe", where the
directory rename from "gcc" to "prev-gcc" was done the moment before.
As we stat the module's real file right after loading now, there is no
point in using NtQueryVirtualMemory with MemorySectionName any more, and
we can use what GetModuleFileName returned instead.
-Add vendor identification
-Support in get_cpu_cache
Background:
Chengdu Haiguang IC Design Co., Ltd (Hygon) is a Joint Venture
between AMD and Haiguang Information Technology Co.,Ltd., aims at
providing high performance x86 processor for China server market.
Its first generation processor codename is Dhyana, which
originates from AMD technology and shares most of the
architecture with AMD's family 17h, but with different CPU Vendor
ID("HygonGenuine")/Family series number(Family 18h).
Related Hygon kernel patch can be found on:
http://lkml.kernel.org/r/5ce86123a7b9dad925ac583d88d2f921040e859b.1538583282.git.puwen@hygon.cn
Signed-off-by: Jinke Fan <fanjinke@hygon.cn>
There's no longer a need to consider the connect_evt after fork/exec.
After stopping the listen_client thread, all client handlers should be
in the fc_connected or fc_invalid states, so their connect_evt members
won't be used again.
Also remove code in fhandler_fifo::dup that just repeats things
already done in stop_listen_client.
Add a method fhandler_fifo::check_listen_client_thread that checks
whether the thread is running. Use it in raw_read instead of just
testing the handle listen_client_thr.
On exit from the listen_client thread, make sure there's no pending
FSCTL_PIPE_LISTEN request. Otherwise we might get a client connection
after restarting the thread, and we won't have a handle for
communicating with that client.
Remove the retry loop in the case of STATUS_PIPE_LISTENING; that case
shouldn't occur.
Remove the now-unused fc_connecting value from
fifo_client_connect_state.
It's now up to the caller to pass a handle to open_pipe and, if
desired, to call set_handle on return.
This will be useful for a future commit, in which we will open a
client connection without setting an io_handle.
When opening a duplexer, open a client connection to the first client
handler. Previously we gave the duplexer a bogus write handle, which
was just a duplicate of the first client handler's handle. This meant
that we had a pipe server with no clients connected, and all I/O
attempts failed with STATUS_PIPE_LISTENING.
Extend the last fcntl change to duplexers.
Remove a now unused fifo_client_handler constructor, as well as the
long unusued method fifo_client_handler::connect.
Don't create the pipe in duplex mode; the server handle will only be
used for reading.
NtQueryVirtualMemory for MemorySectionName does not reliable return the
changed dll file name when another process does move the file around,
and we may end up creating forkable hardlinks to wrong dll files.
So query the file id when loading the dll rather than before fork.
Make stat_real_file_once a method of struct dll, to be more flexible on
where to use. Also, debug print memory section name queried for a dll.
This is a preparation to query the file id when loading the dll.
The blocking mode of the Windows pipe underlying a writer is set to
match that of the writer itself when the latter is opened. Define
fhandler_fifo::fcntl to keep the pipe and the writer in sync if the
blocking mode is changed via fcntl.
* Change default fallback for failed winsock error -> POSIX error
mappings to EACCES, which is a valid errno for more socket-related
syscalls.
* Added a few previously missing entries to the wsock_errmap table
that have obvious POSIX errno.h analogues.
Add methods need_fixup_before, init_fixup_before, and
fixup_before_fork_exec to accomplish this. Stopping the thread makes
sure that the client handler lists of the parent and child remain in
sync while the forking/execing is in progress.
Don't use the same i/o handle for the first client handler as is used
for the fhandler itself; this can lead to a later attempt to close the
same handle twice. Instead use a duplicate.
* Pre-release version still reporting kernel version 6.4.
* Windows 10 1511 is out of support since 2017-10-10.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Define fhandler:fifo::fixup_after_exec, which sets listen_client_thr
and lct_termination_evt to NULL. This forces the listen_client thread
to restart on the first attempt to read after an exec. Previously the
exec'd process could hang in fhandler_fifo::raw_read.
Remove fifo_client_handler::connect and move its code into
listen_client_thread. That way we can check the return status when a
client handler's connect_evt is signaled. Previously we incorrectly
assumed there was a successful connection.
Also simplify listen_client_thread in the following ways:
- Replace fhandler_fifo::disconnect_and_reconnect by a new
delete_client_handler method. Now we just delete invalid client
handlers rather than trying to re-use them.
- Try to maintain a client handler list that consists of connected
client handlers and exactly one that is listening for a connection.
This allows us to call WaitForMultipleObjects with only two wait
objects.
- Remove 'dummy_evt' from the fifo_client_handler struct; it is no
longer needed.
- On exit from listen_client_thread, delete the "extra" (listening)
client handler. Otherwise there could be a connection that doesn't
get recorded in the client handler list. This could happen when a
file descriptor is being duplicated.
Don't set the write end of the pipe to non-blocking mode if the FIFO
is opened in blocking mode.
In fhandler_fifo::raw_write in blocking mode, wait for the write to
complete rather than returning -1 with EAGAIN.
If the amount to write is large, write in smaller chunks (of size
determined by a new data member max_atomic_write), as in
fhandler_base_overlapped.
For convenience, add two new NTSTATUS codes, STATUS_THREAD_SIGNALED
and STATUS_THREAD_CANCELED, to ntdll.h.
After copyto is called, make the new fhandler's pipe_name point to the
new fhandler's pipe_name_buf, which is a *copy* of the old fhandler's
pipe_name_buf. Previously, get_pipe_name would return the wrong
result after a clone/dup, causing create_pipe_instance and open_pipe
to fail.
Also, stop the listen_client thread when cloning. Otherwise the
thread can keep accepting connections that the cloned fhandler won't
know about.
Do this via a new method fhandler_fifo::stop_listen_client, extracted
from fhandler_fifo::close.
Make read_ready a manual reset event. It should always be set shortly
after startup of the listen_client thread and remain set until the
thread terminates. (We don't want writers to connect without being
recorded in the client handler list.)
Remove the unnecessary code that checks for read_ready when a reader
is opening.
Add data members 'reader', 'writer', and 'duplexer' to the
fhandler_fifo class. Set them in fhandler_fifo::open. ('duplexer'
replaces the previous '_duplexer'.)
This will be useful in later commits.
The word "client" suggests something that holds a handle to the client
side of the pipe (in Windows terminology). But our
fifo_client_handlers hold a handle the server side of the pipe, and
they *connect* to clients.
Rather than newest last write time of all dlls loaded, use the forking
process' windows pid and windows thread id as directory name to create
the forkable hardlinks into. While this may create hardlinks more
often, it does avoid conflicts between dlls not having the newest last
write time.
* Changes error handling to allow /proc/[pid]/ virtual files to be
empty in some cases (in this case the file's formatter should return
-1 upon error, not 0).
* Better error handling of /proc/[pid]/stat for zombie processes:
previously trying to open this file on zombie processes resulted
in an EINVAL being returned by open(). Now the file can be read,
and fields that can no longer be read are just zeroed.
* Similarly for /proc/[pid]/statm for zombie processes.
* Similarly for /proc/[pid]/maps for zombie processes (in this case the
file can be read but is zero-length, which is consistent with observed
behavior on Linux.
- After 24 bit color support patch, arrow keys and function keys
do not work properly in native console applications if they
are started in cygwin console. This patch fixes this issue.
In case SA_SIGINFO flag is given, the signal handler may change
the context and the application is supposed to pick up from the
changed context. So far we don't do that, so the context given
to the signal handler is basically read-only, unless the signal
handler calls setcontext or swapcontext.
For a start, restore the thread's signal mask from the uc_sigmask
value of the context given to the signal handler.
If that's feasible for Cygwin, we restore the entire context from
the context changed by the signal handler in a followup patch.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
commit d1be0a59d4,
"Cygwin: winpids: Fix getting process multiple times"
fixed duplicate processes in ps -W output, but it fixed
the symptom, not the cause. It also didn't fix the problem
that the `ps' process itself may show up twice in its own
output.
This patch fixes it. The spawn worker only deleted the
"winpid.PID" symlink of the current process if the child is
a non-Cygwin process, under the assumption that the exec'ing
process exits anyway. However, the Window in which both
winpid.PID symlinks point to the same cygpid.PID area is just
too long. The spawn worker now also deletes its own winpid.PID
symlink if the exec'ed process is a Cygwin process.
Additionally the fix from d1be0a59d4
is now performed on the calling process, too.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- Add 24 bit color support using xterm compatibility mode in
Windows 10 1703 or later.
- Add fake 24 bit color support for legacy console, which uses
the nearest color from 16 system colors.
In dll_crt0_0, both threadinterface->Init and sigproc_init allocate
windows object handles using unpredictable memory regions, which may
collide with dynamically loaded dlls when they were relocated.
Make fhandler_base::clear_readahead virtual, and implement
fhandler_fifo::clear_readahead. This is called by
dtable::fixup_after_exec; it clears the readahead in each client.
Starting w/ the intro of S4U, seteuid32() calls lsaprivkeyauth(), then
s4uauth(). s4uauth calls LsaRegisterLogonProcess().
LsaRegisterLogonProcess fails w/ STATUS_PORT_CONNECTION_REFUSED, if the
proper privileges are not held.
Because of RtlNtStatusToDosError(), this status would be mapped to
ERROR_ACCESS_DENIED, which in turn would map to EACCES. Therefore it is
useless to add this status to errmap[] (errno.cc), as s4auauth() should
return EPERM as errno here (i.e. if process is not privileged).
Hence the kludge.
Before the intro of S4U, seteuid32() called lsaprivkeyauth(), then
lsaauth(), then create_token(). Before the intro of Vista, the latter
would have called NtCreateToken().
NtCreateToken() would have failed w/ STATUS_PRIVILEGE_NOT_HELD for a
process w/o the proper privileges. In that case, calling seteuid32()
would have returned EPERM (as required).
Since the intro of Vista, and if the process had been started from an
UNelevated shell, create_token() does NOT reach NtCreateToken()!
As create_token() failed to properly set errno in that case, calling
seteuid32() would return errno as set by lsaauth(), i.e. EACCES, not
in agreement w/ Posix (a bug which was present for years).
(lsaauth() called LsaRegisterLogonProcess() which would fail)
If a FIFO is opened with O_RDWR access, create the pipe with
read/write access, and make the first client have the handle of that
pipe as its I/O handle.
Adjust fhandler_fifo::raw_read to account for the result of trying to
read from that client if there's no data.
fhandler_fifo::clone called fhandler_base::clone on each client
fhandler. But those fhandlers are actually fhandler_fifo objects, so
when fhandler_base::clone calls copyto, it's actually
fhandler_fifo::copyto that gets called. This can lead to mysterious
crashes.
Fix this by simply calling clone (which translates to
fhandler_fifo::clone) on each client fhandler.
Add static functions peek_fifo, thread_fifo, start_thread_fifo, and
fifo_cleanup to select.cc. These are based on the corresponding pipe
functions, the main difference being that peek_fifo loops through the
connected clients to see if any of them have data available for
reading.
Add the fhandler_fifo methods select_read, select_write, and
select_except.
Add accessor methods get_nclients, get_handle, and is_connected that
are needed by peek_fifo.
Add a hit_eof method that tries to detect whether any clients are
connected. Before concluding that there are none, it gives the
listen_client thread time to update the client data.
Introduce a 'fifo_client_handler' structure that can be used by a
reader to communicate with a writer using an instance of the named
pipe. An fhandler_fifo opened for reading creates a thread that does
the following:
- maintains a list of fifo_client_handlers
- listens for_clients trying to connect
- creates new pipe instances as needed so that there's always at
least one available for connecting.
The pipe instances are initially created in blocking mode, but they
are set to be non-blocking after a connection is made.
fhandler_fifo::raw_read now loops through the connected clients and
reads from the first one that has data available.
New fhandler_fifo methods: add_client, listen_client,
listen_client_thread, check_listen_client_thread.
Replace the create_pipe method by create_pipe_instance, which allows
unlimited pipe instances.
New helper functions: create_event, set_pipe_non_blocking.
Make fhandler_fifo a derived class of fhandler_base instead of
fhandler_base_overlapped.
Replace the create_pipe macro, which is based on
fhandler_pipe::create, by new create_pipe and open_pipe methods.
These use NT functions instead of Win32 functions. Replace fifo_name
by get_pipe_name, which returns a pointer to a UNICODE_STRING.
Remove the fnevent macro, which would now be needed only once.
Add a raw_write method, adapted from fhandler_base::raw_write.
Adapt all functions to the changes above.
Switching to Cywin-only PIDs introduced a new problem when collecting
Cygwin processes for `ps -W': A process can show up multiple times
again, if the Cygwin procinfo has been opened for a just execing
process. The execed process then shows up twice, once as Cygwin
process, but with the wrong Windows PID of the execing process,
once as Windows-only process.
The mechanism used to exclude these stray processes didn't work with
the new Cygwin pid handling anymore. To fix this
* check if the incoming Windows PID is the same as the PID in the
procinfo. If not, we have the PID of the execing process while
procinfo was already changed,
* always check if the process has already been handled, not only
for processes we got a procinfo for,
* simplify adding pid to pidlist since pid is now always correct.
While at it, fix comments and comment formatting.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
strace only printed the Windows PID in event output so far.
Especially now that Windows and Cygwin PID are decoupled, the
strace user might like to see the Cygwin pid in event output as
well. However, at process startup, the process might not have
a Cygwin PID yet.
To mitigate this, always print the Windows PID and only add the
Cygwin pid if it exists.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
commit c0d7d3e1a2 removed the usage of the
LCMAP_BYTEREV flag in the call to LCMapStringW to workaround a strange
bug in LCMapStringW. This patch didn't take a userspace call of
wcsxfrm{_l} with NULL buffer and 0 size to evaluate the required buffer
size into account. This introduced a crash trying to byte swap the
NULL buffer. This patch fixes that problem.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
3.0.0 changed uname but missed to align /proc/version
which then used the old uname function on the new uname
struct.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Always use NtQuerySystemInformation(SystemProcessIdInformation).
This drops two code paths calling NtQueryInformationProcess or
GetModuleFileNameExW and only requires to open the process
to fetch system time info.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
There's a long-standing bug in ps -W. It only shows processes which ps
can open with PROCESS_QUERY_LIMITED_INFORMATION permissions. However,
that fails for a lot of system processes. Due to that, output is
basically restricted to processes in the same session, as well as Cygwin
processes... which isn't *quite* what ps -W was supposed to do.
Basically we only need to open the process to fetch the image name. If
that fails, utilize the undocumented SystemProcessIdInformation info
class introduced with Windows Vista, which allows to fetch the image
name by specifying the PID. Restructure the code a bit.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
When logging in via ssh with an unprivileged account,
PdhAddEnglishCounter returns with status 0x800007D0,
PDH_CSTATUS_NO_MACHINE. We didn't find any workaround
but the changes to improve debugging output may help
in future. Using UNICODE instead of ANSI functions is
a result of trying to fix this problem.
Also drop the prototype workaround for PdhAddEnglishCounterA.
It's not required anymore since Mingw-w64's pdh.h catched up.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Create process with standard rights, plus
PROCESS_QUERY_LIMITED_INFORMATION for authenticated users. This
allows to fetch basic process information and thus /proc/<PID>/stat
to succeed on foreign processes.
While at it, fix formatting in CreateProcess calls.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
There's no good reason to return blank if some of the info
couldn't be collected. Drop useless call collecting
SystemProcessorPerformanceInformation. Always return some
valid start_time, even if we couldn't collect ProcessTimes.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The OpenProcess call to generate /proc/<PID>/stat info requests
PROCESS_VM_READ, but that's not required. Drop it.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Creating /proc/<PID>/cmdline requires permissions to communicate
with the target process via its signal pipe. If that fails, the
output is "<defunct>" which doesn't make sense most of the time.
Rather, call format_process_exename in this case to get more useful
process name info, albeit not the full cmdline.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The winpid symlinks got created with no query permissions, so
only admins could see all Cygwin processes. Create symlinks
so everyone has query permissions instead.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Canceling the timer thread runs under lock. The thread uses the same
lock to guard its timer_tracker struct access. If the timing is bad,
timer_settime or timer_delete grab the lock at the same time, the timer
expires. In the end, cancel waits for the thread sync while the thread
waits for ther lock to be released.
Fix this by not waiting for the thread sync under lock.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
On setting the timer, the thread is accidentally only canceled when
disarming the timer. This leaks one thread per timer_settimer call.
Move the thread cancellation where it belongs.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
We don't support setting groups via /etc/groups anymore. Also, the
initgroups group list is created via S4U, so we have "Interactive" vs.
"Network" token, an artificial and entirely irrelevant difference.
So, "verifying" the lsaprivkeyauth token may lead to rejecting a prefectly
valid token. Just remove the verify_token call.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Revert "Cywin: user profile: unload impersonation user profile on exit"
Revert "Cygwin: seteuid: allow inheriting impersonation user profile handle"
Revert "Cygwin: user profile: add debug output to unload_user_profile"
Revert "Cygwin: user profile: Make an effort to unload unused user profiles"
This reverts commit bcb33dc4f0.
This reverts commit dd3730ed9c.
This reverts commit 8eee25241e.
This reverts commit 71b8777a71.
This patchset actually results in the following problem:
- After a couple of ssh logon/logoff attempts, an interactive session
of the same user loging in, is broken.
Apparently UnloadUserProfile manages to unload the user's profile
even while a parallel interactive session still uses the user's
profile.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Per MSDN VirtualQueryEx requires PROCESS_QUERY_INFORMATION.
Testing showed that PROCESS_QUERY_LIMITED_INFORMATION is sufficient
since Windows 8.1. The assumption that Windows 8 is the same as
Windows 8 was not correct, it requires PROCESS_QUERY_INFORMATION
as well.
Fix that by splitting the Windows 8 wincaps into one for Windows 8
and one for Windows 8.1. Set needs_query_information for Windows 8.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
If the user domain is the primary domain, LDAP is supposed to
use the default naming context. This is accomplished by setting
domain name to NULL in the call to cyg_ldap::fetch_ad_account.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
cyg_ldap::fetch_ad_account creates a naming context from the
incoming domain, if it's not NULL. The algorithm overwrites
dots with \0 in domain while creating the naming context, but
neglects to restore the dots.
Fix that by never overwriting the incoming domain name.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- feenableexcept,fedisableexcept, fegetexcept are GNU-only
- fegetprec, fesetprec are Solaris, use __MISC_VISIBLE
- _feinitialise is Cygwin-internal only
- Replace self-named FP precision values to values from
http://www.open-std.org/jtc1/sc22//WG14/www/docs/n752.htm
as used by Solaris.
- Change return value of fesetprec to adhere to the above document
and Solaris.
- Document fegetprec, fesetprec as Solaris functions, not as GNU
functions
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
...before calling any of its method. It's no safe bet that
it's already initialized when calling s4uauth and adding it
to load_user_profile certainly doesn't hurt.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
In case of a local machine account login, pi.lpProfilePath points
to the buffer returned by NetUserGetInfo, but NetApiBufferFree
is called prior to calling LoadUserProfileW. Fix by copying over
usri3_profile to the local userpath buffer, just as in the AD case.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
This never really worked. While at it, restructure code to
do common stuff only in one spot. Improve debug output.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Inspecting the content of case-sensitive directories
on remote machines results in lots of errors like
disappearing diretories and files, file not found, etc.
This is not feasible as default behaviour
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
A sleep is required on Windows 10 64 bit only before calling
RegisterClassW in the timerfd thread, and only when running
under strace. One of the child processes inheriting the timerfd
descriptor will get a STATUS_FLOAT_INEXACT_RESULT exception inside
of msvcrt.dll. It's apparently some timing problem. It occurs
in 4 out of 5 runs under strace only. WOW64 and Windows 7 64 bit
don't have this problem.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The share section was created using the PAGE_SIZE constant,
but PAGE_SIZE is 64K. Fix that by using wincap.page_size()
instead, which returns the desired actual page size of 4K.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
timerfd_tracker and timerfd_shared classes:
- Just because handles are shared, we don't have to store them in
shared memory. Move share handles into timerfd_tracker class.
- Drop shared instance counter since it's not required anymore.
timerfd_shared only stores the actual timer data.
- Drop timerfd_shared::create, just set clock id.
- Drop timerfd_shared::dtor, it's not required anymore.
- Drop timerfd_tracker::close, just call dtor where required.
- Rename timerfd_tracker::increment_instances to timerfd_tracker::dup.
It's the only reason it exists...
- timerfd_tracker::dtor now checks the non-shared pointers for NULL
before attempting to close them.
- timerfd_tracker::dtor handles decrementing the local instance count
by itself.
- Add a method timerfd_tracker::init_fixup_after_fork_exec to set
non-shared pointers to NULL. Together with the dtor patches it
fixes a problem with close_on_exec timerfd descriptors.
- Fix a bug in handling the thread synchronization event. It's
actually nice to create it before using it...
- Drop using sec_none{_nih} in InitializeObjectAttributes. It's
an unnecessary roundabout route just to get a NULL pointer.
- Slightly rework timechange window handling.
- Add more comments to explain what happens.
fhandler_timerfd:
- Drop cnew macro, it just hides what happens.
- fhandler_timerfd::fixup_after_exec now calls
timerfd_tracker::init_fixup_after_fork_exec first, so a subsequent
call to timerfd_tracker::dtor only works on valid handles.
- fhandler_timerfd::close directly calls timerfd_tracker::dtor now.
- Drop dtor call in fhandler_timerfd destructor.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
timerfd_tracker::fixup_after_fork_exec always tries to restore
the shared timer region at the same address as in the parent.
This is entirely unnecessary and wasn't intended, rather some
kind of copy/paste thinko. Fix that. Print NtMapViewOfSection
status code in api_fatal on failure for debugging.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The "optimized" condition to recognize an unarmed timer was plain
wrong. Replace it by checking the stored it_value against 0.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The child process needs access to the handle to be able to
unload it when switching user context.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Does this work? There's not much feedback given.
TODO: We might want to try unloading the user profile at process
exit as well, FWIW.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
curr_primary_token is either NO_IMPERSONATION or the external_token
or the internal_token, so it's never required to be closed by itself.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Commit 649911fb40 avoids the
calls to NetUserGetGroups and NetUserGetLocalGroups since
these can take a lot of time. The same problem potentially
occurs when loading the user profile. The code fetches
the roaming profile path calling NetUserGetInfo, which also
can be rather slow.
To avoid this problem, fetch the profile patch using LDAP.
Also, don't bail out early if the user's registry hive already
exists. This may result in outdated information.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
NetUserGetGroups and NetUserGetLocalGroups sometimes take a lot of time
(up to more than 2 mins) for no apparent reason.
Call s4uauth to generate an identification token for the user and fetch
the group list from there. This is *much* faster.
Keep the old code only for the sake of WOW64 on Vista and Windows 7,
which don't implement MsV1_0S4ULogon.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
s4uath was only callable to create an impersonation token so
far. Rework the function to allow creating an identification
token for informational purposes even from untrusted processes.
Take domainname and username instead of a passwd pointer to be
more multi-purpose.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Commit 4e34a39b5c made sure all user and
group names are case-correct, but it introduced a hefty performance hit
on starting the first Cygwin process.
Adding an ldap call for each AD group in a user token takes its toll in
bigger AD environments with lots of groups in a user token. Real-life
example: 300 groups w/ roundtrip time to the LDAP server of 0.25 secs
per call...
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Up to Vista CreateProcessAsUser only worked with primary tokens,
so convert S4U impersonation token to primary token. MSDN still
documents it that way, but actually an impersonation token is
sufficient since Windows 7.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Under WOW64 on 64 bit Windows 7, MsV1_0S4ULogon appears to be
unimplemented, probably under Vista as well. Re-enable
create_token method, to allow basic seteuid on W7 WOW64 and
Vista as well.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
for domain accounts we try KerbS4ULogon first, MsV1_0S4ULogon
second. But we only fetch the package id for the supporting
authentication package (Kerberos/MsV1_0) once at the start.
Duplicate LsaLookupAuthenticationPackage call and move into the
Kerb/MsV1_0 branches so that it fetches the correct package id
for the method we call next.
Curious enough this worked before. Apparently both methods
work with the MICROSOFT_KERBEROS_NAME_A package id. However,
requesting and using the right authentication package id is
the prudent thing to do.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
This reverts commit 7c34811440.
This potentially allows to circumvent OpenSSHs user/group name matching,
unless the Admin knows to add every local user twice or to use patterns,
e.g.:
Match user MACHINE+user,.+user
Match user *+user
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Commit c1023ee353 changed the way
path_conv::binmode() works. Rather than returning three states,
O_BINARY, O_TEXT, 0, it only returned 2 states, O_BINARY, O_TEXT. Since
mounts are only binary if they are explicitely mounted binary by setting
the MOUNT_BINARY flag, textmode is default.
This introduced a new bug. When inheriting stdio HANDLEs from native
Windows processes, the fhandler and its path_conv are created from a
device struct only. None of the path or mount flags get set this way.
So the mount flags are 0 and path_conv::binmode() returned 0.
After the path_conv::binmode() change it returned O_TEXT since, as
explained above, the default mount mode is textmode.
Rather than just enforcing binary mode for path_conv's created from
device structs, this patch changes the default mount mode to binary:
Replace MOUNT_BINARY flag with MOUNT_TEXT flag with opposite meaning.
Drop all explicit setting of MOUNT_BINARY. Drop local set_flags
function, it doesn't add any value.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
When recognizing a negative pid, optind is off by one. The
code correcting this has been erroneously removed by commit
8de660271f. Revert that.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The solution from commit 9a3cc77b2a
didn't work for foreign domain accounts. Rather than calling
LookupAccountSid we now use the info when we fetch it anyway
via LDAP or Net*GetInfo. Only in case of domain groups we have
to add an LDAP call explicitly.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Make sure a domain+username fits into the local name buffer.
The former buffer size didn't take adding a domain name to
a really_really_long_user_name into account.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
When looking up valid accounts by name, LookupAccountName returns
a SID and a case-correct domain name. However, the name was input
and LookupAccountName is case-insensitive, so the name is not
necessarily written the same way as in SAM or AD.
Fix that by doing a reverse lookup on the just fetched SID. This
fetches the account name in the correct case. Override the
incoming name with the case correct name from LookupAccountSid.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
This is a really old and crappy API, as the previous commit shows.
Use NtQueryInformationFile(FilePositionInformation) here instead.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
dtable::set_file_pointers_for_exec is called from
child_info_spawn::worker to move the file position of O_APPEND
files to EOF if the child is a native child.
However, this only works correctly for the first O_APPEND
file descriptor:
- set_file_pointers_for_exec calls SetFilePointer. The higher
4 bytes of the desired file offset are given to SetFilePointer
as pointer to a DWORD value. On return, SetFilePointer returns
the higher 4 bytes of the new file position in this DWORD.
- So for the second and subsequent descriptors the higher 4 byte
of the file position depend on what the actual file position
of the previous file has been set to:
- If the file is > 2 Gigs, the high offset will not be 0 anymore.
- If the desciptor points to a non-seekable file (i.e., a pipe
or socket), SetFilePosition returns an error and sets the high
position to -1.
Fix this by calling SetFilePointerEx instead, which does not
modify the incoming position value.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
When calling spawnve, in contrast to execve, the parent has
to create the pid for the child. With the old technique
this was simply the Windows pid, but now we have to inform
the child about its new pid.
Add a cygpid member to class child_info_spawn. Set it in
child_info_spawn::worker, just prior to calling CreateProcess
rather than afterwards. Overwrite cygheap->pid in
child_info_spawn::handle_spawn before calling pinfo::thisproc.
Make sure pinfo::thisproc knows the pid is already set by
setting the handle argument to INVALID_HANDLE_VALUE.
Also set procinfo->dwProcessId to myself_initial.dwProcessId
instead of to myself_initial.pid for clarity.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
When the current process has renamed (to bin) a readonly dll, we get
STATUS_TRANSACTION_NOT_ACTIVE for unknown reason when subsequently
creating the forkable hardlink. A workaround is to open the original
file with FILE_WRITE_ATTRIBUTES access, but that fails with permission
denied for users not owning the original file.
* forkable.cc (dll::create_forkable): Retry hardlink creation using the
original file's handle opened with FILE_WRITE_ATTRIBUTES access when the
first attempt fails with STATUS_TRANSACTION_NOT_ACTIVE.
* Rename cygwin_shared->prefer_forkable_hardlinks to
forkable_hardlink_support, with values
0 for Unknown, 1 for Supported, -1 for Unsupported.
Upon first dll loaded ever, dll_list::forkable_ntnamesize checks the
/var/run/cygfork directory to both exist and reside on NTFS, setting
cygwin_shared->forkable_hardlink_support accordingly.
* Replace enum forkables_needs by bool forkables_created: Set
to True by request_forkables after creating forkable hardlinks.
To avoid the need for each process to check the filesystem to detect
that hardlink creation is impossible or disabled, cache this fact in
shared memory. Removing cygfork directory while in use does disable
hardlinks creation. To (re-)enable hardlinks creation, the cygfork
directory has to exist before the first cygwin process does fork.
* forkable.cc (dll_list::forkable_ntnamesize): Short cut
forkables needs to impossible when disabled via shared memory.
(dll_list::update_forkables_needs): When detecting hardlink
creation as impossible (not on NTFS) while still (we are the
first one checking) enabled via shared memory, disable the
shared memory value.
(dll_list::request_forkables): Disable the shared memory value
when hardlinks creation became disabled, that is when the
cygfork directory was removed.
* include/cygwin/version.h: Bump CYGWIN_VERSION_SHARED_DATA 6.
* shared_info.h (struct shared_info): Add member
prefer_forkable_hardlinks. Update CURR_SHARED_MAGIC.
* shared.cc (shared_info::initialize): Initialize
prefer_forkable_hardlinks to 1 (Yes).
To support in-cygwin package managers, the fork() implementation must
not rely on .exe and .dll files to stay in their original location, as
the package manager's job is to replace these files. Instead, when the
first fork try fails, and we have NTFS, we use hardlinks to the original
binaries in /var/run/cygfork/ to create the child process during the
second fork try, along the main.exe.local file to enable the "DotLocal
Dll Redirection" feature for the dlls.
The (probably few) users that need an update-safe fork manually have to
create the /var/run/cygfork/ directory for now, using:
mkdir --mode=a=rwxt /var/run/cygfork
* child_info.h: Bump CURR_CHILD_INFO_MAGIC.
(enum child_status): Add _CI_SILENTFAIL flag.
(struct child_info): Add silentfail setter and getter.
* winsup.h (child_copy): Add bool silentfail parameter.
* cygheap.cc: Pass silentfail parameter to child_copy.
* dcrt0.cc: Ditto.
* dll_init.h (struct dll): Define public inline method forkedntname.
(struct dll_list): Declare private method find_by_forkedntname.
* dll_init.cc (struct dll_list): Implement find_by_forkedntname.
(dll_list::alloc): Use find_by_forkedntname when in load after fork.
(dll_list::load_after_fork_impl): Load dlls using dll::forkedntname.
* fork.cc (frok::parent): Set silentfail child info flag. Pass
silentfail parameter to child_copy. Use forkedntname of
dlls.main_executable.
(fork): When first dofork run failed and did not use forkables,
run dofork again with_forkables set to true.
(child_copy): Use debug_printf if silentfail is true,
system_printf otherwise.
In preparation to protect fork() against dll- and exe-updates, create
hardlinks to the main executable and each loaded dll in subdirectories
of /var/run/cygfork/, if that one exists on the NTFS file system.
The directory names consist of the user sid, the main executable's NTFS
IndexNumber, and the most recent LastWriteTime of all involved binaries
(dlls and main executable). Next to the main.exe hardlink we create the
empty file main.exe.local to enable dll redirection.
The name of the mutex to synchronize hardlink creation/cleanup also is
assembled from these directory names, to allow for synchronized cleanup
of even orphaned hardlink directories.
The hardlink to each dynamically loaded dll goes into another directory,
named using the NTFS IndexNumber of the dll's original directory.
* Makefile.in (DLL_OFILES): Add forkable.o.
* dll_init.h (struct dll): Declare member variables fbi, fii,
forkable_ntname. Declare methods nominate_forkable,
create_forkable.
(struct dll_list): Declare enum forkables_needs. Declare member
variables forkables_dirx_size, forkables_dirx_ntname,
forkables_mutex_name, forkables_mutex. Declare private methods
forkable_ntnamesize, prepare_forkables_nomination,
update_forkables_needs, update_forkables, create_forkables,
denominate_forkables, close_mutex, try_remove_forkables,
set_forkables_inheritance, request_forkables. Declare public
static methods ntopenfile, read_fii, read_fbi. Declare public
methods release_forkables, cleanup_forkables. Define public
inline method setup_forkables.
* dll_init.cc (dll_list::alloc): Allocate memory to hold the
name of the hardlink in struct dll member forkable_ntname.
Initialize struct dll members fbi, fii.
(dll_list::load_after_fork): Call release_forkables method.
* fork.cc: Rename public fork function to static dofork, add
with_forkables as bool pointer parameter. Add new fork function
calling dofork. (struct frok): Add bool pointer member
with_forkables, add as constructor parameter.
(frok::parent): Call dlls.setup_forkables before CreateProcessW,
dlls.release_forkables afterwards.
* pinfo.cc (pinfo::exit): Call dlls.cleanup_forkables.
* syscalls.cc (_unlink_nt): Rename public unlink_nt function to
static _unlink_nt, with 'shareable' as additional argument.
(unlink_nt): New, wrap _unlink_nt for original behaviour.
(unlink_nt_shareable): New, wrap _unlink_nt to keep a binary
file still loadable while removing one of its hardlinks.
* forkable.cc: New file.
Implement static functions mkdirs, rmdirs, rmdirs_synchronized,
stat_real_file_once, format_IndexNumber, rootname, sidname,
exename, lwtimename. Define static array forkable_nameparts.
(struct dll): Implement nominate_forkable, create_forkable.
(struct dll_list): Implement static methods ntopenfile,
read_fii, read_fbi. Implement forkable_ntnamesize,
Even for the main executable and cygwin1.dll store the file name as full
NT path. Create the child process using the main executable's file name
converted from the full NT path stored before.
* dll_init.cc (dll_list::alloc): Search for DLL_SELF type entry
with module name like for DLL_LINK, use full NT path to search
for DLL_LOAD type only. For DLL_SELF type do not indicate
having a destructor to be called.
(dll_list::find): Ignore DLL_SELF type entries.
(dll_list::init): Ditto. Call track_self method.
(dll_list::track_self): New.
(dll_list::load_after_fork): Call track_self method.
* dll_init.h (enum dll_type): Add DLL_SELF, for the main
executable and cygwin1.dll.
(struct dll_list): Declare private method track_self. Declare
member variable main_executable.
* fork.cc (frok::parent): Use ntname from dlls.main_executable
to create child process, converted to short path using
dll_list::buffered_shortname.
Store loaded dll's file name as full NT path.
* dll_init.h (struct dll): Rename member variable name to ntname.
(struct dll_list): Declare private static member variable
nt_max_path_buffer. Declare public static methods form_ntname,
form_shortname. Define public static methods nt_max_path_buf,
buffered_shortname.
(dll_list::operator []): Use PCWCHAR rather than const PWCHAR.
(dll_list::find_by_modname): Ditto.
* dll_init.cc (in_load_after_fork): Define earlier in file.
(struct dll_list): Rename member variable name to ntname.
Define nt_max_path_buffer variable.
Implement static methods form_ntname, form_shortname.
(dll_list::operator []): Use PCWCHAR rather than const PWCHAR.
(dll_list::find_by_modname): Ditto.
(reserve_at): Ditto.
(release_at): Ditto.
(dll_list::alloc): Use nt_max_path_buf method instead of local
buffer. Store module file name as full NT path, convert using
the form_ntname static method.
(dll_list::load_after_fork): Call load_after_fork_impl only when
reload_on_fork is set.
* fork.cc (frok::child): Call dlls.load_after_fork even without
need to dynamically load dlls.
(frok::parent): Move syscall_printf into the retry loop.
Trying to delete in-use executables and DLLs using
FILE_DISPOSITION_POSIX_SEMANTICS returns STATUS_CANNOT_DELETE.
Fall back to the former method if that error occurs to allow
unlinking these files.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The symlink target of /proc/PID/fd files pointing to pipes and
sockets are just artificial filenames referencing the object using
some internal number. The pipe open code expects a path specifying
process pid and the internal number so it access the right process
and pipe.
- Set the posix path of the pipe to the simple pipe name only,
as it shows up in /proc/PID/fd. A /proc/self prefix is just
as wrong as a /dev/fd prefix.
- Revert thinko in fhandler_pipe::open expecting the name as
/proc/self/fd/... In fact this should never happen.
- Fix up the path before re-opening the pipe instead.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The reopen code neglected to pass along the requested open
mode correctly. This may end up reopening the file with
incorrect access mask, or duplicating the wrong pipe handle.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Move TerminateProcess call into cleanup code to make sure child
doesn't linger in some border cases.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
When fork finally fails although both CreateProcess and creating the
"cygpid.N" shared memory section succeeded, we have to release that
shared memory section as well - before releasing the process handle.
Otherways we leave an orphan "cygpid.N" shared memory section, and any
subsequent cygwin process receiving the same PID fails to initialize.
* fork.cc (frok::parent): Call child.allow_remove in cleanup code.
- If the execve'ed process is a non-Cygwin process, we have to
create the matching winpid symlink and remove the old one
ourselves.
- If we spawn a child, the winpid symlink has to be maintained
by the child process, otherwise it disappears if the parent
process exits.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The arguments are not used anyway, so drop them. When called,
procinfo->dwProcessId is already set right, so we don't have
to access myself_initial.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
This may end up killing the wrong process. Only allow Cygwin PID.
Slightly clean up code: Remove outdated W95 considerations. Fix
a bug in commandline argument processing.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Since commit b5e1003722, native
Windows processes not started by Cygwin processes don't have a
Cygwin PID anymore. This breaks ps -W and kill -f <WINPID>.
Introduce MAX_PID (65536 for now).
Cygwin processes as well as native Windows processes started
from a Cygwin process get a PID < MAX_PID. All other native
Windows processes get a faked Cygwin PID >= MAX_PID.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Using the Windows PID as Cygwin PID has a few drawbacks:
- the PIDs on Windows get reused quickly. Some POSIX applications choke
on that, so we need extra code to avoid too quick PID reuse.
- The code to avoid PID reuse keeps parent process handles and
(depending on a build option) child processes open unnecessarily.
- After an execve, the process has a split personality: Its Windows PID
is a new PID, while its Cygwin PID is the PID of the execve caller
process. This requires to keep two procinfo shared sections open, the
second just to redirect process info requests to the first, correct
one.
This patch changes the way Cygwin PIDs are generated:
- Cygwin PIDs are generated independently of the Windows PID, in a way
expected by POSIX processes. The PIDs are created incrementally in
the range between 2 and 65535, round-robin.
- On startup of the first Cygwin process, choose a semi-random start PID
for the first process in the lower PID range to make the PIDs slightly
unpredictable. This may not be necessary but it seems kind of inviting
to know that the first Cygwin process always starts with PID 2.
- Every process not only creates the shared procinfo section, but also a
symlink in the NT namespace, symlinking the Windows PID to the Cygwin
PID. This drops the need for the extra procinfo section after execve.
- Don't keep other process handles around unnecessarily.
- Simplify the code creating/opening the shared procinfo section and
make a clear distinction between interfaces getting a Cygwin PID and
interfaces getting a Windows PID.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
If a process is just exiting, requesting memory info may fail
with STATUS_PROCESS_IS_TERMINATING. Right now the code just bails
out if fetching mem info fails. However, the rest of the info is
still valuable for procps, so just carry on.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
After creating a pthread, the stack gets moved to the desired memory
location. While the 32 bit thread wrapper copies the exception handler
information to the new stack (so we have at least *some* exception
handler present), the x86_64 code didn't perform any exception handler
magic. Fix that.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
VirtualQueryEx, called by fixup_mmaps_after_fork, requires
PROCESS_QUERY_INFORMATION permissions per MSDN. However, testing
shows that PROCESS_QUERY_LIMITED_INFORMATION is sufficient when
running the same code on Windows 8.1 or Windows 10. Fix the code
to give the forked child always PROCESS_QUERY_INFORMATION perms
on Windows Vista/7 and respective server releases.
Revert now unneeded patch to check_token_membership as well.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
POSIX requires that raise(3) is equivalent to
pthread_kill(pthread_self(), sig);
in multi-threaded applications. Our raise just called kill(sig).
Fix that.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Keeping an inheritable handle open results in that handle being
spilled over into grandchild processes, which is not desired.
Duplicate original parent handle into a non-inheritable one with
minimal SYNCHRONIZE permissions and close the original handle.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- Exec'ed/spawned processes don't need PROCESS_DUP_HANDLE. Remove that
permission from the parent handle.
- PROCESS_QUERY_LIMITED_INFORMATION doesn't work for Windows 7 if the
process is started as a service. Add PROCESS_QUERY_INFORMATION for
pre-Windows 8 in that case.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The version info only depends on the object files. This results
in the version info not being rebuild immediately if a source
file is changed. Rather, the version info is only rebuilt on the
next make run.
Fix that by making the version info build rule dependent on the
source files.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- This simple and official method replaces cyglsa and "create token"
methods. No network share access, same as before.
- lsaauth and create_token are disabled now. If problems crop up,
they can be easily reactivated. If no problems crop up, they
can be removed in a while, together with the lsaauth subdir.
- Bump Cygwin version to 3.0.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The previous patch failed with password-less auth because in
that case the return code from get_server_groups wasn't tested.
Fix that. Also make sure that get_server_groups does not
check if the account is disabled or locked out when just fetching
the group list for initgroups or getgrouplist.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
So far seteuid could change uid to any existing account, given
sufficient permissions of the caller. This is kind of bad since
it disallows admins to refuse login to disabled or locked out
accounts.
Add check for the account's UF_ACCOUNTDISABLE or UF_LOCKOUT flags
and don't let the user in, if one of the flags is set.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Use info from same source (GetNetworkParams).
Also move getdomainname near gethostname in source.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
If gethostname() fails we call GetComputerNameEx with
ComputerNameDnsFullyQualified. This is wrong, gethostname should return
the hostname only, not the FQDN. Fix this by calling GetComputerNameEx
with ComputerNameDnsHostname.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
When reusing a cygthread, the stub method fails to set the thread name
to the new name. The name is only set when actually creating the
thread. Fix that by moving the SetThreadName call right in front of the
thread function call.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Combine with a bit of cleanup:
- Drop overrun_event_running in favor of overrun_count being -1.
- Fix include guard in posix_timer.h.
- Drop ununsed function timespec_to_us.
- Don't use Interlocked functions without need.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Allocating on the cygheap would copy information of the tracker into
the child process. A forked child knows the timer id and could simply
still access the (free'd but still valid) timer_tracker on the heap,
which is dangerous and very certainly doesn't reflect POSIX semantics.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- Rename files timer.* to posix_timer.*.
- Reimplement using an OS timer rather than a handcrafted wait loop.
- Use a Slim R/W Lock for synchronization.
- Drop timer chaining. It doesn't server a purpose since all timers
are local only.
- Rename ttstart to itimer_tracker to better reflect its purpose.
It's not the anchor for a timer chain anymore anyway.
- Drop fixup_timers_after_fork. Everything is process-local, nothing
gets inherited.
- Rename timer_tracker::disarm_event to disarm_overrun_event for
better readability.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- When correcting the next expiration timestamp, the number of
expirations gets computed correctly, just the expiration timestamp
itself is then only incremented by a single interval, rather than
the just computed expired intervals. Fix that.
- drop the local clock variable in timerfd_tracker::create. It doesn't
serve any purpose.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- split into to __try/__except blocks to make sure
leave_critical_section is always called when required.
- Actually fill time_spec in settime so it_interval is returned
correctly.
- Return all 0 if timer is disarmed.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The value returned by reading from a timerfd is not an overrun
count in the same sense as for posix timers, it's an expiry counter.
Reflect that in the name.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- Drop erroneous initial computation of overrun count in settime
for absolute non-realtime clocks. It's repeated in thread_func
and thus counted twice.
- Fix overrun computation for timestamp offsets being a multiple of
the timer interval. The timestamp has to be corrected after the
first offset, otherwise the correction loop counts the intervals
again.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Non-CLOCK_REALTIME counters always use a relative DueTime in NtSetTimer.
However, relative DueTime has to be negative, but the code
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- On systems with inexact realtime clock, the current timestamp may
be fractionally smaller than the desired timestamp. This breaks the
computation for incrementing overrun_count so overrun_count may end
up as 0. Expiring the timer with an overrun_count of 0 is a no-go.
Make sure we always increment overrun_count by at least one after
timer expiry.
- Do not expire the timer when another process deletes its timer_tracker.
This, too, may result in a 0 overrun_count.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Using posix timers "timer_tracker" as base class for timerfd was flawed.
Posix timers are not inherited by child processes and don't survive
execve. The method used by posix timers didn't allow to share timers
between processes. The timers were still per-process timers and worked
entirely separate from each other. Reading from these timers via
different descriptors was only synchronized within the same process.
This does not reflect the timerfd semantics in Linux: The per-file
timers can be dup'ed and survive fork and execve. They are still just
descriptors pointing to the same timer object originally created by
timerfd_create. Synchronization is performed between all descriptor
instances of the same timer, system-wide.
Thus, reimplement timerfd using a timer instance in shared memory,
a kernel timer, and a handful of sync objects.
Every process maintains a per-process timerfd struct on the cygheap
maintaining a per-process thread. Every process sharing the same
timerfd will run this thread checking the state of the timer, similar
to the posix timer thread, just working on the shared objects and
synchronizing its job with each other thread.
Drop the timerfd implementation in the posix timer code and move the
public API to fhandler_timerfd.c. Keep the ttstart timer_tracker
anchor out of "NO_COPY" since the fixup_after_fork code should run to
avoid memory leakage.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Linux returns EINVAL, "fd is attached to an object which is unsuitable
for writing". If we don't handle write locally, write returns EBADF.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- Puzzeling: Commit ec98d19a08
changed ttstart to NO_COPY but kept all the code to handle
fixup after fork. Revert to not-NO_COPY and make timerfd
fork work.
- On fixup_after_fork, keep timerfd timers and restart thread
if they were armed in the parent.
- Move timerfd timer_trackers to cygheap. Overload timer_tracker
new and delete methods to handle timers accordingly. This is not
exactly required for fork, but exec will be grateful.
- Give up on TFD_TIMER_CANCEL_ON_SET for now. There's no easy way
to recognize a discontinuous change in a clock.
- Be paranoid when cleaning out ttstart.
- Fix some minor issues.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- Drop initial overrun computation from timer_tracker::settimer.
It's performed in timer_tracker::thread_func anyway.
- Fix regression in returning correct overrun count narrowed down to
int from timer_getoverrun. This has been introduced by changing
overrun_count_curr to LONG64.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
First cut of a timerfd implementation.
Still TODO:
- fork/exec semantics
- timerfd_settime TFD_TIMER_CANCEL_ON_SET flag
- ioctl(TFD_IOC_SET_TICKS)
- bug fixes
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
In case sigwait_common returns EINTR, read wrongly ignores it,
so read can't be interrupt by a signal. Fix that.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
While FileRenameInformationEx is defined starting with Windows
10 1709 per MSDN, it only starts working in W10 1809, apparently.
Users of 1803 report "Function not implemented".
Introduce wincap_10_1809 and change the version check in
wincapc::init accordingly. Split has_posix_file_info into
has_posix_unlink_semantics and has_posix_rename_semantics.
Enable the latter only starting with W10 1809.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Allow the signal thread to recognize we're called in consequence of
select on a signalfd. If the signal is part of the wait mask, don't
call any signal handler and don't remove the signal from the queue,
so a subsequent read (or sigwaitinfo/sigtimedwait) still gets the
signal. Instead, just signal the event object at
_cygtls::signalfd_select_wait for the thread running select.
The addition of signalfd_select_wait to _cygtls unearthed the alignment
problem of the context member again. To make sure this doesn't get lost,
improve the related comment in the header file so that this (hopefully)
doesn't get lost (again).
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
First cut of a signalfd implementation.
Still TODO: Non-polling select.
This should mostly work as on Linux except for missing support
for some members of struct signalfd_siginfo, namely ssi_fd,
ssi_band (both SIGIO/SIGPOLL, not fully implemented) and ssi_trapno
(HW exception, required HW support).
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
There's a long-standing bug in select. If we have poll-only
descriptors in the fd set, select overwrites the incoming
fd sets with the polling result. If none of the fds is ready,
select has to loop again. But now the fd sets are set to all
zero and select hangs.
Fix this by utilizing the local fd sets r, w, e as storage for
the incoming fd sets and use them to initialize select_stuff.
If we have to loop, overwritung the incoming fd sets doesn't matter.
While at it, rename r, w, e to readfds_in, writefds_in, exceptfds_in.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- use int64_t instead of long long
- make is_timer_tracker const
- improve copyright header comment
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
So far we check the recycler name all the time, and the last interation
also only managed to handle two ways to write the recycler. However,
an adventurous user might change the case of the recycler arbitrarily.
Fix this problem by keeping track of the name in a somewhat relaxed
fashion. Use camel back on drive C by default, all upper case elsewhere.
Only if the rename op fails do we fix the recycler name on the fly
when trying to create it, and it turns out it already existed.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
If the first rename fails, we reopen the rootdir for creating a subdir.
The rootdir handle can change its value at this point, but the code
doesn't take this into account. The subsequent rename then fails with
STATUS_INVALID_HANDLE. Fix this by copying the new rootdir value to
pfri->RootDirectory.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
So far we reopened the file if it was opened case sensitive to
workaround the problem that the recycler could be named in
camel back or all upper case, depending on who created it.
That's a problem for O_TMPFILE on pre-W10. As soon as the
original HANDLE gets closed, delete-on-close is converted to full
delete disposition and all useful operations on the file cease to
work (STATUS_ACCESS_DENIED or STATUS_FILE_DELETED).
To avoid that problem drop the reopen code and check for the exact
recycler filename, either $Recycle.Bin or $RECYCLE.BIN, if the file
has been opened case sensitive.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
On pre-W10 systems there's no way to reopen a file by handle if
the delete disposition is set. We try to get around with
duplicating the handle.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The new proc fd code accidentally allowed to linkat an O_TMPFILE
even if the file has been opened with O_EXCL. This patch fixes it.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
move special fd symlink code into own fhandler_process_fd class
to simplify further additions to /proc/PID/fd/DESCRIPTOR symlink
handling.
Add a method to handle stat(2) on such a proc fd symlink by handle.
This allows correct reply from stat(2) if the target file has been
deleted. This eventually fixes `awk -f /dev/fd/3 3<<eof'.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
path_conv now sets the PATH_RESOLVE_PROCFD flag in path_flags if
the PC_SYM_NOFOLLOW_PROCFD pathconv_arg flag has been set on input
*and* the file is actually a proc fd symlink.
Add matching path_conv::follow_fd_symlink method for checking and
use it in open(2).
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- Remove another unfortunate amalgamation: Mount flags (MOUNT_xxx)
are converted to path_types (PATH_xxx) and mixed with non-mount
path_types flags in the same storage, leading to a tangled,
pell-mell usage of mount flags and path flags in path_conv and
symlink_info.
- There's also the case of PC_NONULLEMPTY. It's used in exactly
one place with a path_conv constructor only used in this single
place, just to override the automatic PC_NULLEMPTY addition
when calling the other path_conv constructors. Crazily,
PC_NONULLEMPTY is a define, no path_types flag, despite its
name.
- It doesn't help that the binary flag exists as mount and path
flag, while the text flag only exists as path flag. This leads
to mount code using path flags to set text/binary. Very confusing
is the fact that a text mount/path flag is not actually required;
the mount code sets the text flag on non binary mounts anyway, so
there are only two states. However, to puzzle people a bit more,
path_conv::binary wrongly implies there's a third, non-binary/non-text
state.
Clean up this mess:
- Store path flags separately from mount flags in path_conv and
symlink_info classes and change all checks and testing inline
methods accordingly.
- Make PC_NONULLEMPTY a simple path_types flag and drop the
redundant path_check constructor.
- Clean up the definition of pathconv_arg, path_types, and mount flags.
Use _BIT expression, newly define in cygwin/bits.h.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
There's an unfortunate amalgamation of caller-provided pathconv_arg
flags with path_types flags which in turn are mostly mount flags.
This leads to a confusion of flag values in sylink_info::pflags and,
in turn, in path_conv::path_flags.
This patch decouples pathconv_flags from the other flags by making
sure that a pathconv_flag is never copied into a variable used for
path_types flags. Also, remove PATH_NO_ACCESS_CHECK since it's
not necessary.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Along the same lines as the previous patch: By reopening an
O_TMPFILE by handle, we can now move the file to the bin at
open time and thus free'ing up the parent dir and *still*
open the file as /proc/PID/fd/DESCRIPTOR by linkat(2).
Allows expressions along the lines of `cat /proc/self/fd/0 <<EOF'.
The problem here is that the temporary file used for the here script
has already been deleted by the shell. Opening by filename, as
implemented so far, doesn't work because the file has been moved
to the bin.
Allow reopening files by handle the same way from another process
as long as we have sufficient permissions on the foreign process.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
To allow reopening a file open in another process by HANDLE, introduce
a matching file_pathconv method, taking a file descriptor as parameter.
The result is a serialized path_conv and a HANDLE value. The HANDLE is
valid in the foreign process and MUST be duplicated into the target
process before usage.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
So far io_handle is NULL when calling fhandler_base::open to
open or create a file. Add a check for io_handle to allow
priming the fhandler with a HANDLE value so we can reopen a
file from a HANDLE on file systems supporting it. This allows
to open already deleted files for further action. This will
be used by open("/proc/PID/fd/DESCRIPTOR") scenarios.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The commit message of commit 07e0a9584f
and the expectation set therein, are wrong.
There's no POSIX semantics allowing to link a file with a link
count of 0 and making it available in the file system again.
In fact, the Linux linkat extension AT_EMPTY_PATH explicitely
disallows to link a file descriptor to a file with a link count
of 0, except for O_TMPFILE without O_EXCL.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- Turns out, the definition of POSIX unlink semantics is half-hearted
so far: It's not possible to link an open file HANDLE if it has
been deleted with POSIX semantics, nor is it possible to remove
the delete disposition. This breaks linkat on an O_TMPFILE.
Tested with W10 1809.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
On Windows 10 1803 and later, create dirs under the Cygwin
installation dir as case sensitive, if WSL is installed.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- short-circuit most code in unlink_nt since it's not necessary
anymore if FILE_DISPOSITION_POSIX_SEMANTICS is supported.
- Immediately remove O_TMPFILE from filesystem after creation.
Disable code for now because we have to implement /proc/self/fd
opening by handle first, lest linkat fails.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Newer FAT32 and exFAT add FILE_SUPPORTS_ENCRYPTION to their
flags which wasn't handled by Cygwin yet.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Various new file info class members adding important POSIX semantics
have been added with W10 1709. We may want to utilize them, so add
a matching wincaps.
Rearrange checking the W10 build number to prefer the latest builds
over the older builds. Rename wincap_10 to wincap_10_1507 for
enhanced clarity.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- Add missing members added in later OS versions
- Rearrange accompanying FILE_foo_INFORMATION structs
ordered by info class
- Add promising FILE_foo_INFORMATION structs of later
Windows 10 releases plus accompanying enums
- Drop "Checked on 64 bit" comments since that's self-evident
these days
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The check for the TEB being allocated beyond the first 2GB area is not
valid anymore. At least on W10 WOW64, the TEB is allocated in the
lower 2GB even in large-address aware executables. Use VirtualQuery
instead. It fails for invalid addresses so that's a simple enough test.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
While reformatting the script, backticks `` were replaced with
brackets $(). This in turn invalidated the \\( ... \\) expressions in the
sed script because backslash resolution in $() works differently from
backslash resolution in ``. Only a single backslash is valid now.
While at it, fix up the uname(2) date representation when building a
snapshot.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
when calling clocks too early in DLL init, the vtables are not correctly
set up for some reason. Calls to init() from now() fail because the init
pointer in the vtable is NULL.
Real life example is mintty which runs into a minor problem at startup,
triggering a system_printf call. Strace is another problem, it's called
the first time prior to any class initialization.
Workaround is to make sure that no virtual methods are called in an
early stage. Make init() non-virtual and convert resolution() to a
virtual method instead. Add a special non-virtual
clk_monotonic_t::strace_usecs.
While at it:
- Inline internal-only methods.
- Drop the `inited' member. Convert period/ticks_per_sec toa union.
Initialize period/ticks_per_sec via InterlockeExchange64.
- Fix GetTickCount64 usage. No, it's not returning ticks but
milliseconds since boot (unbiased).
- Fix comment indentation.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Use whatever native unit the system provides for the resolution of
a timer to avoid rounding problems
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- Drop hires_[nm]s clocks, rename hires.h to clock.h.
- Implement clk_t class as an extensible clock class in new file clock.cc.
- Introduce get_clock(clock_id) returning a pointer to the clk_t instance
for clock_id. Provide the following methods along the lines of the former
hires classes:
void clk_t::nsecs (struct timespec *);
ULONGLONG clk_t::nsecs ();
LONGLONG clk_t::usecs ();
LONGLONG clk_t::msecs ();
void clk_t::resolution (struct timespec *);
- Add CLOCK_REALTIME_COARSE, CLOCK_MONOTONIC_RAW, CLOCK_MONOTONIC_COARSE
and CLOCK_BOOTTIME clocks.
- Allow clock_nanosleep, pthread_condattr_setclock and timer_create to use
all new clocks (both clocks should be usable with a small tweak, though).
- Bump DLL major version to 2.12.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
clock_setres is a questionable function only existing on QNX.
Disable the function, just return success for CLOCK_REALTIME
to maintain backward compatibility.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The current method to make hires_ns priming thread-safe isn't
thread-safe. Rather than hoping that running the thread in
TIME_CRITICAL priority is doing the right thing, use a spinlock.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
LARGE_INTEGER has QuadPart anyway, no reason to compute the
64 bit value from HighPart and LowPart.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
fhandler_socket_wsock::set_socket_handle calls set_flags after
setting the O_NONBLOCK/O_CLOEXEC flags, thus overwriting them.
It also turns out that fhandler_socket_wsock::init_events is called
too late. The inheritence flags are changed before creating the
socket event handling objects. Thus, inheritence flags for
those objects are wrong with SOCK_CLOEXEC.
Fix this by reordering the calls and setting the file flags through
fhandler_base::set_flags.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Regression introduced with 2.11.0:
The failure paths in socket, socketpair and accept4 functions and
methods accidentally release *unused* cygheap_fdmanip objects. The
subsequently called dtable::release method was designed to be called for
*used* cygheap_fdmanip objects only. Using them on unused objects leads
to NULL pointer member dereferencing.
Worse, the inet/local accept4 methods only release the cygheap_fdmanip
object but neglect to delete the just created fhandler_socket_* object.
Fix this by removing the erroneous release calls in the aforementioned
failure paths and delete the fhandler_socket_* object in accept4 instead.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The fhandler_base_overlapped::copyto clears atomic_write_buf on the
clone, but none of the derived classes were doing this. This allowed
the destructor to double-free the buffer and corrupt cygheap.
Clear atomic_write_buf in copyto of all derived classes.
Move common content of the various <sys/dirent.h> and the latest FreeBSD
<dirent.h> to <dirent.h>.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Drop Cygwin-specific nanl in favor of a generic implementation
in newlib. Requires GCC 3.3 or later.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The current loop condition is borderline. Make sure it ends and
choose a replacement char in the unlikely case the current console
font isn't recognized at all.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Rather than relying on an index variable, store the current
replacement char and use that directly in WriteConsoleW.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
EnumFontFamiliesExW fails if the font is "Terminal" (aka "Raster Fonts")
and lfCharSet requests ANSI_CHARSET. Using DEFAULT_CHARSET fixes this.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Make sure device context is not copied to forked process.
It is a process-specific datastructure.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Try various Unicode characters which may be used as a replacement
character in case an invalid character has to be printed.
Current list is 0xfffd "REPLACEMENT CHARACTER", 0x25a1 "WHITE SQUARE",
and 0x2592 "MEDIUM SHADE" in that order.
Additionally workaround a problem with some fonts (namely DejaVu
Sans Mono) which are returned wit ha broken fontname with trailing
stray characters.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
So far we printed a half filled square (0x2592) if the input char is
invalid, but using REPLACEMENT CHARACTER (0xfffd) is apparently the way
to go.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Commit 35998fc2fa fixed the buffer underun
in win32 path normalization, but introduced a new bug: A wrong
assumption led to the inability to backtrack the path outside of the
current working directory in case of relative paths.
This patch fixes this problem, together with a minor problem if the CWD
is on a network share: The result erroneously started with tripple
backslash if the src path starts with a single backslash.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Starting with Windows 10, LookupAccountSid/Name return valid
info for the login session with new SID_NAME_USE value
SidTypeLogonSession. To return the same info as on pre-Windows 10,
we have to handle this type.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
cygpsid::get_id neglects to set the type to 0 (ACL_UNDEFINED_TAG
in POSIX speak) if the SID can not be translated into a valid
uid or gid. This in turn leads to incorrect handling of uid/gid -1
entries.
Fix this by setting type to 0 if the id is unknown.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
This patch follows glibc. Original commit message:
Author: Florian Weimer <fweimer@redhat.com>
Date: Thu, 14 Apr 2016 06:54:57 +0000
Remove union wait [BZ #19613]
The overloading approach in the W* macros was incompatible with
integer expressions of a type different from int. Applications
using union wait and these macros will have to migrate to the
POSIX-specified int status type.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Add __nl_item to <sys/_types.h> for FreeBSD compatibility. Use it in
<langinfo.h> and the Cygwin <nl_types.h>. Make the enum __nl_item in
<langinfo.h> anonymous.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
This reverts commit 8a32c24a7b.
Replacing page_size() with allocation_granularity() was incorrect.
The values returned by get_mem_values() are # of pages of size
page_size(). Multiplying with allocation_granularity() here
results in values 16 times too big.
By excluding the denormal-operand exception from FE_ALL_EXCEPT, it will not
be possible anymore to UNmask this exception by means of the API defined by
/usr/include/fenv.h
Note: terminology has changed since IEEE Std 854-1987; denormalized numbers
are called subnormal numbers nowadays.
This modification has basically been motivated by the fact that it is also
not possible on Linux to manipulate the denormal-operand exception by means
of the interface as defined by /usr/include/fenv.h. This has been the state
of affairs on Linux since 2001 (Andreas Jaeger).
The exceptions required by the standard (IEEE Std 754), in case they can be
supported by the implementation, are:
FE_INEXACT, FE_UNDERFLOW, FE_OVERFLOW, FE_DIVBYZERO and FE_INVALID.
Although it is allowed to define additional exceptions, there is no reason
to support the "denormal-operand exception" in this case (fenv.h), because
the subnormal numbers can be handled almost as fast the normalized numbers
by the hardware of the x86/x86_64 architecture. Said differently, a reason
to trap on the input of subnormal numbers does not exist. At least that is
what William Kahan and others at Intel asserted around 2000.
(that is William Kahan of the K-C-S draft, the precursor to the standard)
This commit modifies winsup/cygwin/include/fenv.h as follows:
- redefines FE_ALL_EXCEPT from 0x3f to 0x3d
- removes the definition for FE_DENORMAL
- introduces __FE_DENORM (0x2) (enum in Linux also uses __FE_DENORM)
- introduces FE_ALL_EXCEPT_X86 (0x3f), i.e. ALL x86/x86_64 FP exceptions
* create new function __get_cpus_per_group to evaluate # of CPU groups
* Call from format_proc_cpuinfo and sched_getcpu
* Bump API minor version
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
fnstenv MUST be followed by fldenv in fegetenv(), as the former disables all
exceptions in the x87 FPU, which is not appropriate here (fegetenv() ).
fldenv after fnstenv should reload the x87 FPU w/ the configuration that was
saved by fnstenv, i.e. a configuration that might have exceptions enabled.
Note: x86_64 uses SSE for floating-point, not the x87 FPU. However, because
feraiseexcept() attempts to provoke an exception using the x87 FPU, the bug
in fegetenv() will make this attempt futile here (x86_64).
Note: WoW uses the x87 FPU for floating-point, not SSE. Here anything that
would normally result in triggering an exception, not only feraiseexcept(),
will not be able to, as result of the bug in fegetenv().
Updates to misc files to integrate AIO into the Cygwin source tree.
Much of it has to be done when adding any new syscalls. There are
some updates to limits.h for AIO-specific limits. And some doc mods.
This code is where the AIO implementation is wired into existing Cygwin
mechanisms for file and device I/O: the fhandler* functions. It makes
use of an existing internal routine prw_open to supply a "shadow fd"
that permits asynchronous operations on a file the user app accesses
via its own fd. This allows AIO to read or write at arbitrary locations
within a file without disturbing the app's file pointer. (This was
already the case with normal pread|pwrite; we're just adding "async"
to the mix.)
This is the core of the AIO implementation: aio.cc and aio.h. The
latter is used within the Cygwin DLL by aio.cc and the fhandler* modules,
as well as by user programs wanting the AIO functionality.
Make getfacl print two colons instead of one after "other" and "mask".
Change the help text for setfacl to indicate that there can be either
one colon or two.
Bug in current ARM64 WOW64: GetNativeSystemInfo returns
PROCESSOR_ARCHITECTURE_INTEL rather than PROCESSOR_ARCHITECTURE_ARM64.
Provide for this.
Make code better readable.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Guard the entire operation with the FastPebLock critical section
used by RtlSetCurrentDirectory_U as well, thus eliminating the
race between concurrent chdir/fchdir/SetCurrentDirectory calls.
Streamline comment explaining the fallback method.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
* fhandler_socket_local.cc (get_inet_addr_local): Change type from
'static int' to 'int' to be callable from syslog.cc.
* syslog.cc (connect_syslogd): Use get_inet_addr_local() instead of
getsockname() to retrieve name information of the syslogd socket.
Our local ntsecapi.h wrapper corrects a bug in the definition of
SystemFunction036 which otherwise leads to crashes on 32 bit when
using RtlGenRandom. The fhandler_socket_local.cc file accidentally
included the incorrect w32api version of that file, rather than the
local wrapper. Fix it.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Certain tape drives (known example: QUANTUM_ULTRIUM-HH6) return
the non-standard ERROR_NOT_READY rather than ERROR_NO_MEDIA_IN_DRIVE
if no media is present. ERROR_NOT_READY is not documented as valid
return code from GetTapeStatus. Without handling this error code
Cygwin's tape code can't report an offline state to user space.
Fix this by converting ERROR_NOT_READY to ERROR_NO_MEDIA_IN_DRIVE
where appropriate.
Add a debug_printf to mtinfo_drive::get_status to allow requesting
user info without having to rebuild the DLL.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
pthread_timedjoin_np returns ETIMEDOUT if a thread is still running,
not EBUSY as pthread_tryjoin_np.
Also, clean up initializing timeout in pthread_tryjoin_np.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- Move pthread_join to thread.cc to have all `join' calls in
the same file (pthread_timedjoin_np needs pthread_convert_abstime
which is static inline in thread.cc)
- Bump API version
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
* fhandler.h (class fhandler_socket_inet): Add variable bool oobinline.
* fhandler_socket_inet.cc (fhandler_socket_inet::fhandler_socket_inet):
Initialize variable oobinline.
(fhandler_socket_inet::recv_internal): Make the handling of OOB data
as consistent with POSIX as possible. Add simulation of inline mode
for OOB data as a workaround for broken winsock behavior.
(fhandler_socket_inet::setsockopt): Ditto.
(fhandler_socket_inet::getsockopt): Ditto.
(fhandler_socket_wsock::ioctl): Fix return value of SIOCATMARK command.
The return value of SIOCATMARK of winsock is almost opposite to
expectation.
* fhandler_socket_local.cc (fhandler_socket_local::recv_internal):
Remove the handling of OOB data from AF_LOCAL domain socket. Operation
related to OOB data will result in an error like Linux does.
(fhandler_socket_local::sendto): Ditto.
(fhandler_socket_local::sendmsg): Ditto.
This fixes the issue reported in following post.
https://cygwin.com/ml/cygwin/2018-06/msg00143.html
Commit ebd645e on 2001-10-03 made environ.cc:_addenv() add unneeded
space at the end of the environment block to "work around problems
with some buggy applications." This clutters the code and is
presumably no longer needed.
Thanks to Ken Harris <Ken.Harris@mathworks.com> for the diagnosis.
When backing up tail to handle a "..", the code only checked that
it didn't underrun the destination buffer while removing path
components. It did *not* take into account that the first backslash
in the path had to be kept intact. Example path to trigger the
problem: "C:\A..\..\..\B'
Fix this by moving the dst pointer to the first backslash so subsequent
tests cannot underrun this position. Also make sure that we always
*have* a backslash.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Thanks to Ken Harris <Ken.Harris@mathworks.com> for the diagnosis
which led to a buffer underrun in this loop.
Revert before release.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
GCC 7 is able to see straight through this trick, so use a more formal
method to avoid the warning.
Signed-off-by: Yaakov Selkowitz <yselkowi@redhat.com>
There are systems with a MaximumProcessorCount not
reflecting the actually available CPUs. The ActiveProcessorCount
is correct though. So we use ActiveProcessorCount rather than
MaximumProcessorCount per group to set group affinity correctly.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
* Change set_socket_type/get_socket_type to virtual methods
* Move various variables into af_unix_shmem_t
* Change sun_name_t to match new usage pattern
* Move shut_state definition and add a name for the 0 value
* Allow marking packet as administrative packet. This allows
filtering out info packets exchange between peers and tweak
data accordingly.
* Rename send_my_name to send_sock_info and send credentials
if not called from bind (so the socket was already connected)
* Handle SO_PASSCRED in setsockopt/getsockopt
* Add input size checking to setsockopt/getsockopt
* Use NT functions where appropriate
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
We need to share socket info between threads *and* processes.
SRWLOCKs are single-process only, unfortunately. Provide a
sharable low-profile spinlock instead.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
E.g. arm ABI requires -fshort-enums for bare-metal toolchains.
Given there are only 29 category enums, the compiler chooses an
8 bit enum type, so a size of 11 bits for the bitfield leads to
a compile time error:
error: width of 'cat' exceeds its type
enum category cat: 11;
^~~
Fix this by aligning the size of the category members to byte
borders.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Per-socket info in fhandler isn't correctly shared between multiple
instances of th same descriptor. Implement a basic shared info which
is shared between all instances of a socket.
This also requires to move the fhandler_socket status bits into
fhandler_socket_wsock since the data is moved to the shared region
for AF_UNIX sockets.
Also, drop backing file requirement for socketpair server socket.
This will be handled differently in recvmsg/sendmsg.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
* don't abort on failing allocation, just return with error
* make sure the allocation is restricted to a single process
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Bad idea. A file hidden from directory listings is not seen by
rm either, so it never calls unlink for the file and a recursive
removal of the parent directory fails with "directory not empty".
Fix comments accordingly.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
* Use correct cygwait/WFSO invocation to not die on cancel and signals
uncontrolled.
* Manage io handles under io_lock.
* Copy peer address to user space under SEH to avoid a resource leak.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Using TerminateThread potentially leaks resources. In our case,
the connect wait thread may be forcefully terminated after
having successfully opened a client side pipe handle. If this
occurs, we have a stale pipe server instance, so the pipe will
never be closed as long as the process lives.
Avoid this by changing the npfs handle to non-blocking, so we can
wait on a termination event object from inside the thread itself
and cleanly exit from the thread instead of terminating.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Depending on the exact circumstances, some erros are indicated
by different status codes. Add helper macros to handle them
together.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The handle to the device is never needed. As the name impies,
FSCTL_PIPE_WAIT works on the file system, not on the device level.
Drop opening the device and make sure to open only one handle to NPFS.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
They are only used there anyway and it allows to use the AF_UNIX
macro without tweaking header files. While at it, improve
both constructors. The default constructor now creates the name
of an unnamed socket, the constructor taking parameters carefully
checks its input.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
...plus lots of helper functions. Add comment to explain how everything
works. This comment will be improved while implementing the yet missing
parts.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
This function is going to be used for transposing sun_path of
abstract sockets. This also adds a transposition of the NUL
character to tfx_chars since NUL-bytes in abstract socket names
are perfectly valid.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Add constructors and new/delete operators to make sure sun_name_t
objects are allocated on the cygheap.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
* check_reparse_point_target returns a path flag mask, rather than
just 1. Return PATH_SYMLINK | PATH_REP for symlinks and directory
mount points, PATH_SOCKET | PATH_REP for AF_UNIX sockets.
* Define Cygwin AF_UNIX socket reparse tag and GUID in ntdll.h.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
* Rearrange includes and drop unneccessary ones.
* Don't pull in cygwin/socket.h into sys/un.h just to get
sa_family_t. Include sys/types.h and use __sa_family_t instead.
* start including Windows headers using the w32api/ path prefix
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
fhandler_cygdrive has a size of 696 bytes on x86_64, while the next
biggest fhandler type, fhandler_pty_master, is 584 bytes. The members
responsible for the size are private to opendir/readdir/closedir usage.
fhandler_disk_file stores private readdir data in DIR->__d_internal
instead. Use equivalent method with fhandler_cygdrive. This drops
the size to 464 bytes.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
* Make distinct from AF_LOCAL for testing purposes. This will have
to be reverted as soon as fhandler_socket_unix goes life.
* Move saw_reuseaddr flag back to fhandler_socket status
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Insert another class fhandler_socket_wsock between fhandler_socket
and fhandler_socket_inet/fhandler_socket_local.
Also, add a new method fhandler::is_wsock_socket to allow asking
for sockets in general (is_socket) vs. Winsock-based sockets
(is_wsock_socket).
This allows to develop a new handler_socket_unix class as derived
class from fhandler_socket without any trace of wsock code left
in fhandler_socket.
While this is basically a temporary measure at this time, it may
prove useful for later interoperability with the upcoming Windows 10
AF_UNIX implementation at one point.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
* Rename DEV_TCP_MAJOR to DEV_SOCK_MAJOR
* Drop FH_TCP, FH_UDP, FH_ICMP in favor of single FH_INET
* Drop FH_UNIX, FH_STREAM, FH_DGRAM in favor of single FH_LOCAL
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
First cut, still incomplete
* fhandler_socket is now base class for other socket classes
* fhandler_socket_inet handles AF_INET and AF_INET6 sockets
* fhandler_socket_local handles AF_LOCAL/AF_UNIX sockets
* finally get rid of fdsock by using set_socket_handle in accept4
* align file-related calls (fstat, fstatvfs, fchown, fchmod, facl)
to Linux.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- Move definition of windows to POSIX error mapping struct into
cygerrno.h
- Move declaration of winsock errno functions to cygerrno.h
- Input to error mapping functions is DWORD
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Dropping the 'LL' specifier leads to 32 bit truncation during timestamp
computation. Revert it. Exempt MSPERSEC which is used for 32 bit values.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Ken Brown
Corinna Vinschen
Mark Geisert
Ben Wijen
Yaakov Selkowitz
Michael Haubenwallner
Jinke Fan
Erik M. Bray
Takashi Yano
J.H. van de Water
Brian Inglis
Jozef Lawrynowicz
David McFarland
Sebastian Huber
Sergejs Lukanihins
Thomas Wolff
David Macek