Remove "32" or "64" from each of the following names: acl32,
aclcheck32, aclfrommode32, aclfrompbits32, aclfromtext32, aclsort32,
acltomode32, acltopbits32, acltotext32, facl32, fchown32, fcntl64,
fstat64, _fstat64, _fstat64_r, ftruncate64, getgid32, getgrent32,
getgrgid32, getgrnam32, getgroups32, getpwuid32, getpwuid_r32,
getuid32, getuid32, initgroups32, lseek64, lstat64, mknod32, mmap64,
setegid32, seteuid32, setgid32, setgroups32, setregid32, setreuid32,
setuid32, stat64, _stat64_r, truncate64.
Remove prototypes and macro definitions of these names.
Remove "#ifndef __INSIDE_CYGWIN__" from some headers so that the new
names will be available when compiling Cygwin.
Remove aliases that are no longer needed.
Include <unistd.h> in fhandler_clipboard.cc for the declarations of
geteuid and getegid.
fix tty_nr maj/min bits, vmmaxrss units, and x86 format mismatch:
ctty maj is 31:16, min is 15:0; tty_nr s/b maj 15:8, min 31:20, 7:0;
vmmaxrss s/b bytes not pages;
times all 64 bit - change formats of first two instances from %lu to %U;
realign sprintf formats and variables/values in more logical groups
So far the values of SigPnd and SigBlk were always 0 and SigIgn
was incorrectly set to the block mask of the current thread of
the calling process.
Fix that by adding a _pinfo::siginfo method and a PICOM_SIGINFO
message to allow to request actual signal info of any running process.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Use the same name as glibc & gnulib to indicate "newlib itself is
being compiled". This also harmonizes the codebase a bit in that
_LIBC was already used in places instead of _COMPILING_NEWLIB.
Building for bfin-elf, mips-elf, and x86_64-pc-cygwin produces
the same object code.
The incoming path is allowed to have the form "$PID/fd/[0-9]*/.*"
provided the descriptor symlink points to a directory. Check that
this is indeed the case.
Both flags are outdated and collide with official flags in
sys/_default_fcntl.h, which may result in weird misbehaviour
of file functions.
O_NOSYMLINK is not used anyway.
O_DIROPEN is used in fhandler_virtual and derived classes.
The collision with O_NOFOLLOW results in spurious EISDIR
errors when, e. g., reading files in the registry.
fhandler_base::open_fs uses O_DIROPEN in the call to
fhandler_base::open, but it's not used in this context
further down the road.
Drop both flags and create an alternative "diropen" bool
flag in fhandler_virtual.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
So far negative values were denoting files, positive values
denoting directories. We should prefer a less error prone
method. Redefine virtual_ftype_t to contain only positive
values and replace checks for negativ or positive values with
inline functions virt_ftype_isfile() and virt_ftype_isdir().
Drop outdcated comments referring to numerical virtual_ftype_t
values.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
commit 2607639992f6 "Improve error handling in /proc/[pid]/
virtual files." changed the return value of the /proc/PID
formatting functions to return -1 instead of 0 in the error
case to allow a filesize of 0.
The patch neglected to change this behaviour for /proc/PID/fd
content. This patch fixes that.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
* Changes error handling to allow /proc/[pid]/ virtual files to be
empty in some cases (in this case the file's formatter should return
-1 upon error, not 0).
* Better error handling of /proc/[pid]/stat for zombie processes:
previously trying to open this file on zombie processes resulted
in an EINVAL being returned by open(). Now the file can be read,
and fields that can no longer be read are just zeroed.
* Similarly for /proc/[pid]/statm for zombie processes.
* Similarly for /proc/[pid]/maps for zombie processes (in this case the
file can be read but is zero-length, which is consistent with observed
behavior on Linux.
There's no good reason to return blank if some of the info
couldn't be collected. Drop useless call collecting
SystemProcessorPerformanceInformation. Always return some
valid start_time, even if we couldn't collect ProcessTimes.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The OpenProcess call to generate /proc/<PID>/stat info requests
PROCESS_VM_READ, but that's not required. Drop it.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Creating /proc/<PID>/cmdline requires permissions to communicate
with the target process via its signal pipe. If that fails, the
output is "<defunct>" which doesn't make sense most of the time.
Rather, call format_process_exename in this case to get more useful
process name info, albeit not the full cmdline.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
If a process is just exiting, requesting memory info may fail
with STATUS_PROCESS_IS_TERMINATING. Right now the code just bails
out if fetching mem info fails. However, the rest of the info is
still valuable for procps, so just carry on.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
move special fd symlink code into own fhandler_process_fd class
to simplify further additions to /proc/PID/fd/DESCRIPTOR symlink
handling.
Add a method to handle stat(2) on such a proc fd symlink by handle.
This allows correct reply from stat(2) if the target file has been
deleted. This eventually fixes `awk -f /dev/fd/3 3<<eof'.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Along the same lines as the previous patch: By reopening an
O_TMPFILE by handle, we can now move the file to the bin at
open time and thus free'ing up the parent dir and *still*
open the file as /proc/PID/fd/DESCRIPTOR by linkat(2).
Allows expressions along the lines of `cat /proc/self/fd/0 <<EOF'.
The problem here is that the temporary file used for the here script
has already been deleted by the shell. Opening by filename, as
implemented so far, doesn't work because the file has been moved
to the bin.
Allow reopening files by handle the same way from another process
as long as we have sufficient permissions on the foreign process.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
This reverts commit 8a32c24a7bdb0f3d80daa8f267cc63d15edcf771.
Replacing page_size() with allocation_granularity() was incorrect.
The values returned by get_mem_values() are # of pages of size
page_size(). Multiplying with allocation_granularity() here
results in values 16 times too big.
* Use 64 bit timestamps
* Use System boot and process start time to compute starttime value per
Linux proc.5 description.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
* Redefine NSPERSEC to NS100PERSEC
* Define NSPERSEC as nanosecs per second
* Define USPERSEC as microsecs per second
* Use above constants throughout where appropriate
* Rename to_us to timespec_to_us and inline
* Rename it_bad to timespec_bad and inline
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Commit ba58e5f lowered permission requirements when opening threads
and processes to {PROCESS,THREAD}_QUERY_LIMITED_INFORMATION. However,
when creating the /proc/<PID>/maps file, the call to VirtualQueryEx
requires PROCESS_QUERY_INFORMATION access
Note: It seems PROCESS_QUERY_LIMITED_INFORMATION is sufficient starting
with Windows 8.1, but this is neither documented on MSDN, nor is it a
safe bet. It may have to do with a fixed implementation of the UAC
trust levels. Let's better follow the docs for now.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
In get_mem_values we open the process without PROCESS_VM_READ access
and are *still* able to request working set information, despite
MSDN claiming we need it for this purpose. Instead of adding this
access right, just add an comment to point this out for now.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Using PROCESS/THREAD_QUERY_INFORMATION may limit the number of
processes/threads we can inspect depending on their integrity level.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Revamp device parsing code. Introducing support for more partitions
into the shilka-generated parser has the unfortunate side-effect of
raising the size of the DLL by almost 2 Megs. Therefore we split out
the handling for /dev/sdXY devices into a tiny bit of hand-written
code.
While at it, remove some unused cruft from devices.* and generally
clean up the device class to provide access methods instead of direct
access to members.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Bump GPLv2+ to GPLv3+ for some files, clarify BSD 2-clause.
Everything else stays under GPLv3+.
New Linking Exception exempts resulting executables from LGPLv3 section 4.
Add CONTRIBUTORS file to keep track of licensing.
Remove 'Copyright Red Hat Inc' comments.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
This reverts commit 0008bdea02b690ab19ffe997499cb9a96ee5a66d.
This patch introduced a regression. Calling FOO=$(...) in zsh hangs
indefinitely and has to be killed forcefully.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
