a bit of DIAGNOSTIC code that depends on it.
Reported by: rpokala, mjguzik
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D25204
field. Set the least significant bit in the pointer to the node from its parent
to indicate that the node is red. Have the tree rotation macros leave the
old-parent/new-child node red and the new-parent/old-child node black.
This change makes RB_LEFT and RB_RIGHT no longer assignable, and
RB_COLOR no longer defined. Any code that modifies the tree or
examines a node color would have to be modified after this change.
Reviewed by: markj
Tested by: pho
Differential Revision: https://reviews.freebsd.org/D25105
where the pointer checked is provably never null. Restructure the surrounding
code just enough to make the non-nullness obvious.
Reviewed by: markj
Tested by: pho
Differential Revision: https://reviews.freebsd.org/D25089
child is red or child is null. In the first case, RB_REMOVE_COLOR just changes
the child to black and returns. With this change, RB_REMOVE handles that case,
and drops the child argument to RB_REMOVE_COLOR, since that value is always
null.
RB_REMOVE_COLOR is changed to remove a couple of unneeded tests, and
to eliminate some deep indentation.
RB_ISRED is defined to combine a null check with a test for redness,
to replace that combination in several places.
Reviewed by: markj
Tested by: pho
Differential Revision: https://reviews.freebsd.org/D25032
search to find the node to replace the one being removed, restructure to first
remove the replacement node and correct the parent pointers around it, and then
let the all-cases code at the end deal with the parent of the deleted node,
making it point to the replacement node. This removes one or two conditional
branches.
Reviewed by: markj
Tested by: pho
Differential Revision: https://reviews.freebsd.org/D24845
macros so that is invoked at the root of every subtree that changes in an
insert or delete, and only once, and ordered from the bottom of the tree to the
top. For intel_gas.c, the only user of RB_AUGMENT I can find, change the
augmenting routine so that it does not climb from entry to tree root on every
call, and remove a 'tree correcting' function that can be supplanted by proper
tree augmentation.
Reviewed by: kib
Tested by: pho
Differential Revision: https://reviews.freebsd.org/D23189
removing a node and reinserting it back with an updated key.
This is one of dependencies for the upcoming stats(3) code.
Reviewed by: cem
Obtained from: Netflix
MFC after: 2 weeks
Sponsored by: Klara Inc, Netflix
Differential Revision: https://reviews.freebsd.org/D21786
For configurations without x2APIC support (guests, older hardware), the global
LAPIC MMIO mapping will trigger false-positive KCSan reports as it will appear
that multiple CPUs are concurrently reading and writing the same address.
This isn't actually true, as the underlying physical access will be performed
on the local CPU's APIC. Additionally, because LAPIC access can happen during
event timer configuration, the resulting KCSan printf can produce a panic due
to attempted recursion on event timer resources.
Add a __nosanitizethread preprocessor define to prevent the compiler from
inserting TSan hooks, and apply it to the x86 LAPIC accessors.
PR: 249149
Reported by: gbe
Reviewed by: andrew, kib
Tested by: gbe
Differential Revision: https://reviews.freebsd.org/D26354
This is an unfortunate instance where the __has_attribute check does
not function usefully. Gcc does have the attribute, but for gcc it only
applies to functions, not variables, and trying to apply it to a
variable generates Wattribute. So far we only apply the attribute to
variables. Only enable the attribute for clang, for now.
Reviewed by: Anton Rang <rang at acm.org>
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D22875
The assumptions of linker_set don't play nicely with
AddressSanitizer. AddressSanitizer adds a 'redzone' of zeros around
globals (including those in named sections), whereas linker_set
assumes they are all packed consecutively like a pointer array. So:
let's annotate linker_set so that AddressSanitizer ignores it.
Submitted by: Matthew Bryan <matthew.bryan@isilon.com>
Reviewed by: kib, rang_acm.org
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D22239
The <sys/cdefs.h> and <stdatomic.h> headers already included support for
C11 atomics via intrinsincs in modern versions of GCC, but these versions
tried to "hide" atomic variables inside a wrapper structure. This wrapper
is not compatible with GCC's internal <stdatomic.h> header, so that if
GCC's <stdatomic.h> was used together with <sys/cdefs.h>, use of C11
atomics would fail to compile. Fix this by not hiding atomic variables
in a structure for modern versions of GCC. The headers already avoid
using a wrapper structure on clang.
Note that this wrapper was only used if C11 was not enabled (e.g.
via -std=c99), so this also fixes compile failures if a modern version
of GCC was used with -std=c11 but with FreeBSD's <stdatomic.h> instead
of GCC's <stdatomic.h> and this change fixes that case as well.
Reported by: Mark Millard
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D16585
As discussed in GCC bug 97088
(https://gcc.gnu.org/bugzilla/show_bug.cgi?id=97088), parameters in
prototypes of library functions should use reserved names, or no name
at all.
This patch moves the internal struct __tzrule_struct to its own
internal header sys/_tz_structs.h. This is included from newlib's
time code as well as from Cygwin's localtime wrapper.
Signed-off-by: Torbjörn SVENSSON <torbjorn.svensson@st.com>
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
As discussed in GCC bug 97088
(https://gcc.gnu.org/bugzilla/show_bug.cgi?id=97088), parameters in
prototypes of library functions should use reserved names, or no name
at all.
This patch removes the 'ptr' parameter name from
wint_t _getwchar_r (struct _reent *);
wint_t _getwchar_unlocked_r (struct _reent *);
to avoid possible clashes with user code in case someone uses
before including Newlib's wchar.h (or uses some other conflicting
definition)
Signed-off-by: Torbjörn SVENSSON <torbjorn.svensson@st.com>
As discussed in GCC bug 97088
(https://gcc.gnu.org/bugzilla/show_bug.cgi?id=97088), parameters in
prototypes of library functions should use reserved names, or no name
at all.
This patch removes the 'j' parameter name from
extern intmax_t imaxabs(intmax_t);
to avoid possible clashes with user code in case someone uses
before including Newlib's inttypes.h (or uses some other conflicting
definition)
Signed-off-by: Torbjörn SVENSSON <torbjorn.svensson@st.com>
As discussed in GCC bug 97088
(https://gcc.gnu.org/bugzilla/show_bug.cgi?id=97088), parameters in
prototypes of library functions should use reserved names, or no name
at all.
This patch removes the 'x' parameter name from
extern int __isinff (float);
extern int __isinfd (double);
extern int __isnanf (float);
extern int __isnand (double);
extern int __fpclassifyf (float);
extern int __fpclassifyd (double);
extern int __signbitf (float);
extern int __signbitd (double);
to avoid possible clashes with user code in case someone uses
before including Newlib's math.h (or uses some other conflicting
definition)
The current gamma, gamma_r, gammaf and gammaf_r functions return
|gamma(x)| instead of ln(|gamma(x)|) due to a change made back in 2002
to the __ieee754_gamma_r implementation. This patch fixes that, making
all of these functions map too their lgamma equivalents.
To fix the underlying bug, the __ieee754_gamma functions have been
changed to return gamma(x), removing the _r variants as those are no
longer necessary. Their names have been changed to __ieee754_tgamma to
avoid potential confusion from users.
Now that the __ieee754_tgamma functions return the correctly signed
value, the tgamma functions have been modified to use them.
libm.a now exposes the following gamma functions:
ln(|gamma(x)|):
__ieee754_lgamma_r
__ieee754_lgammaf_r
lgamma
lgamma_r
gamma
gamma_r
lgammaf
lgammaf_r
gammaf
gammaf_r
lgammal (on machines where long double is double)
gamma(x):
__ieee754_tgamma
__ieee754_tgammaf
tgamma
tgammaf
tgammal (on machines where long double is double)
Additional aliases for any of the above functions can be added if
necessary; in particular, I'm not sure if we need to include
__ieee754_gamma*_r functions (which would return ln(|(gamma(x)|).
Signed-off-by: Keith Packard <keithp@keithp.com>
----
v2:
Switch commit message to ASCII
For RISC-V targets without hardware FMA support, include the
common fma implementation to provide that API.
Signed-off-by: Keith Packard <keithp@keithp.com>
Like ARM, some RISC-V implementations have hardware sqrt. Support for
that can be detected at compile time, which the code did. However, the
filenames were incorrect so that both the risc-v specific and general
code were getting included in the resulting library.
Fix this by following the ARM model and #include'ing the general code
when the architecture-specific support is not available.
Signed-off-by: Keith Packard <keithp@keithp.com>
The MSP430 target supports both 16-bit and 20-bit size_t and intptr_t.
Some implicit casts in Newlib expect these types to be
"long", (a 32-bit type on MSP430) which causes warnings during
compilation such as:
"cast from pointer to integer of different size"
This is required to avoid colliding with files built from libm/common
that would end up with the same object name.
When libm.a was constructed from the individual sub-libraries, the
contents of the libm/common files would be replaced by that from
libm/machine/arm with the same name.
Signed-off-by: Keith Packard <keithp@keithp.com>
commit 588a5e1dde added a non-reentrant
call to nano_malloc which causes a build failure if INTERNAL_NEWLIB is
defined.
Here is a snippet of the error:
In file included from .../newlib/newlib/libc/stdlib/nano-mallocr.c:38:
.../newlib/newlib/libc/include/malloc.h:42:25: note: expected 'struct _reent *' but argument is of type 'ptrdiff_t' {aka 'int'}
42 | extern void *_malloc_r (struct _reent *, size_t);
| ^~~~~~~~~~~~~~~
.../newlib/newlib/libc/stdlib/nano-mallocr.c:67:22: error: too few arguments to function '_malloc_r'
67 | #define nano_malloc _malloc_r
| ^~~~~~~~~
.../newlib/newlib/libc/stdlib/nano-mallocr.c:456:11: note: in expansion of macro 'nano_malloc'
456 | mem = nano_malloc(bytes);
| ^~~~~~~~~~~
In file included from .../newlib/newlib/libc/stdlib/nano-mallocr.c:38:
.../newlib/newlib/libc/include/malloc.h:42:14: note: declared here
42 | extern void *_malloc_r (struct _reent *, size_t);
| ^~~~~~~~~
.../newlib/newlib/libc/stdlib/nano-mallocr.c:43: warning: "assert" redefined
43 | #define assert(x) ((void)0)
|
This patch adds a missing RCALL to the args when calling nano_malloc
from nano_calloc, so that if the call is reentrant, reent_ptr is passed
as the first argument.
The variable `bytes` (also added in 588a5e1d) has been changed from a
`ptrdiff_t` to `malloc_size_t` as it does not need to be signed. It is
used to store the product of two unsigned malloc_size_t variables and
then iff there was no overflow is it passed to malloc and memset which
both expect size_t which is unsigned.
Signed-off-by: Craig Blackmore <craig.blackmore@embecosm.com>
This built-in function (available in both gcc and clang) is more
efficient and generates shorter code than open-coding the test.
Signed-off-by: Keith Packard <keithp@keithp.com>
When HAVE_FAST_FMAF is set, use the vfma.f32 instruction, when
HAVE_FAST_FMA is set, use the vfma.f64 instruction.
Usually the compiler built-ins will already have inlined these
instructions, but provide these symbols for cases where that doesn't
work instead of falling back to the (inaccurate) common code versions.
Signed-off-by: Keith Packard <keithp@keithp.com>
Anything with fast FMA is assumed to have fast FMAF, along with
32-bit arms that advertise 32-bit FP support and __ARM_FEATURE_FMA
Signed-off-by: Keith Packard <keithp@keithp.com>
32-bit ARM processors with HW float (but not HW double) may define
__ARM_FEATURE_FMA, but that only means they have fast FMA for 32-bit
floats.
Signed-off-by: Keith Packard <keithp@keithp.com>
It was calling __math_uflow(0) instead of __math_uflowf(0), which
resulted in no exception being set on machines with exception support
for float but not double.
Signed-off-by: Keith Packard <keithp@keithp.com>
This removes the run-time configuration of errno support present in
portions of the math library and unifies all of the compile-time errno
configuration under a single parameter so that the whole library
is consistent.
The run-time support provided by _LIB_VERSION is no longer present in
the public API, although it is still used internally to disable errno
setting in some functions. Now that it is a constant, the compiler should
remove that code when errno is not supported.
This removes s_lib_ver.c as _LIB_VERSION is no longer variable.
Signed-off-by: Keith Packard <keithp@keithp.com>
The __ieee754 functions already return the right value in exception
cases, so don't modify those. Setting the library to _POSIX_/_IEEE_
mode now only affects whether errno is modified.
Signed-off-by: Keith Packard <keithp@keithp.com>
The y0, y1 and yn functions need separate conditions when x is zero as
that returns ERANGE instead of EDOM.
Also stop adjusting the return value from the __ieee754_y* functions
as that is already correct and we were just breaking it.
Signed-off-by: Keith Packard <keithp@keithp.com>
math_errhandling is specified to contain two bits of information:
1. MATH_ERRNO -- Set when the library sets errno
2. MATH_ERREXCEPT -- Set when math operations report exceptions
MATH_ERRNO should match whether the original math code is compiled in
_IEEE_LIBM mode and the new math code has WANT_ERRNO == 1.
MATH_ERREXCEPT should match whether the underlying hardware has
exception support. This patch adds configurations of this value for
RISC-V, ARM, Aarch64, x86 and x86_64 when using HW float.
Signed-off-by: Keith Packard <keithp@keithp.com>
_IEEE_LIBM is the configuration value which controls whether the
original libm functions modify errno. Use that in the new math code as
well so that the resulting library is internally consistent.
Signed-off-by: Keith Packard <keithp@keithp.com>
C compilers may fold const values at compile time, so expressions
which try to elicit underflow/overflow by performing simple
arithemetic on suitable values will not generate the required
exceptions.
Work around this by replacing code which does these arithmetic
operations with calls to the existing __math_xflow functions that are
designed to do this correctly.
Signed-off-by: Keith Packard <keithp@keithp.com>
----
v2:
libm/math: Pass sign to __math_xflow instead of muliplying result
Compiling
#include <sys/select.h>
void f(int X)
{
fd_set set;
FD_ZERO(&set);
FD_SET(X,&set);
FD_CLR(X+1,&set);
(void)FD_ISSET(X+2,&set);
}
results in plenty of gcc warnings when compiled with
-Wconversion -Wsign-conversion:
fds.c:7:2: warning: conversion to ‘long unsigned int’ from ‘int’ may
FD_SET(X,&set);
^~~~~~
[...]
The unsigned NFDBITS macro combined with the signed 1L constant
are causing lots of implicit signed/unsigned type conversions.
Fix this by updating the FD_* macro code to the latest from FreeBSD
and adding an (int) cast to _NFDBITS.
As a side-effect, this fixes the visibility of NFDBITS and
fds_bits (only if __BSD_VISIBLE).
This also eliminates the old, outdated fd_set workaround.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Newlib's posix_spawn has been taken from FreeBSD. The code relies on
BSD-specific behaviour of vfork, namely the fact that vfork blocks
the parent until the child exits or calls execve as well as the fact
that the child shares parent memory in non-COW mode.
This behaviour can't be emulated by Cygwin. Cygwin's vfork is
equivalent to fork. This is POSIX-compliant, but it's lacking BSD's
vfork ingrained synchronization of the parent to wait for the child
calling execve, or the chance to just write a variable and the parent
will see the result.
So this requires a Cygwin-specific solution. The core function of
posix_spawn, called do_posix_spawn is now implemented twice, once using
the BSD method, and once for Cygwin using Windows synchronization under
the hood waiting for the child to call execve and signalling errors
upstream. The Windows specifics are hidden inside Cygwin, so newlib
only calls internal Cygwin functions.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
ld: libm.a(lib_a-fesetenv.o): in function `fesetenv':
newlib/libm/machine/arm/fesetenv.c:38: undefined reference to `vmsr_fpscr'
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Use the already existing stub files if possible. These files are
necessary to override the stub implementation with the machine-specific
implementation through the build system.
Reviewed-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Signed-off-by: Eshan dhawan <eshandhawan51@gmail.com>
The previous fenv support for ARM used the soft-float implementation of
FreeBSD. Newlib uses the one from libgcc by default. They are not
compatible. Having an GCC incompatible soft-float fenv support in
Newlib makes no sense. A long-term solution could be to provide a
libgcc compatible soft-float support. This likely requires changes in
the GCC configuration. For now, provide a stub implementation for
soft-float multilibs similar to RISC-V.
Move implementation to one file and delete now unused files. Hide
implementation details. Remove function parameter names from header
file to avoid name conflicts.
Provide VFP support if __SOFTFP__ is not defined like glibc.
Reviewed-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Signed-off-by: Eshan dhawan <eshandhawan51@gmail.com>
This patch fixes a bug in RISC-V's memcpy implementation where an
integer wraparound occurs when src + size < 8 * sizeof(long), causing
the word-sized copy loop to be incorrectly entered.
Signed-off-by: Chih-Mao Chen <cmchen@andestech.com>
If __HAVE_LOCALE_INFO__ is not defined, then the locale in the
locale-specific ctype functions is ignored. In the previous
implementation this resulted in compiler warnings. For example:
int main()
{
locale_t locale;
locale = duplocale(uselocale((locale_t)0));
isspace_l('x', locale);
return 0;
}
gcc -Wall main.c
main.c: In function 'main':
main.c:6:11: warning: variable 'locale' set but not used [-Wunused-but-set-variable]
6 | locale_t locale;
| ^~~~~~
_ICONV_CONVERTER -> ICONV_FROM_ENCODING. It's not perfect, as the
library can support different from/to encodings now, but at least in
the default configurations the tests now work.
Signed-off-by: Keith Packard <keithp@keithp.com>
This caused the strnstr to walk off the end of the alias array and
fetch invalid data. Instead of attempting to update 'len', just
re-compute it based on the table end pointer that is already known.
Signed-off-by: Keith Packard <keithp@keithp.com>
The pointer value for the iconv alias data never changes, so get rid
of the pointer and make it an array instead.
Signed-off-by: Keith Packard <keithp@keithp.com>
Fix the code checking for character set loading failure so that
it checks the return value from the init function.
Signed-off-by: Keith Packard <keithp@keithp.com>
The original implementation had multiple issues:
- Only worked when posix_memalign was available (Linux, RTEMS).
- Violated C11 link namespace rules by calling posix_memalign.
- Failed to set errno on error.
These can be fixed by essentially using the same implementation
for aligned_alloc as for memalign, i.e. simply calling _memalign_r
(which is always available and a "more reserved name" although
technically still not in the reserved link namespace, at least
code written in c cannot define a colliding symbol, newlib has
plenty such namespace issues so this is fine).
It is not clear what the right policy is when MALLOC_PROVIDED is set,
currently that does not cover aligned_alloc so it is kept that way.
Tested on aarch64-none-elf
The IEEE spec for pow only has special case for x**0 and 1**y when x/y
are quiet NaN. For signaling NaN, the general case applies and these functions
should signal the invalid exception and return a quiet NaN.
Signed-off-by: Keith Packard <keithp@keithp.com>
These functions shared a pattern of re-converting the argument to bits
when returning +/-0. Skip that as the initial conversion still has the
sign bit.
Signed-off-by: Keith Packard <keithp@keithp.com>
Recent GCC appears to elide multiplication by 1, which causes snan
parameters to be returned unchanged through *iptr. Use the existing
conversion of snan to qnan to also set the correct result in *iptr
instead.
Signed-off-by: Keith Packard <keithp@keithp.com>
This fix comes from glibc, from files which originated from
the same place as the newlib files. Those files in glibc carry
the same license as the newlib files.
Bug 14155 is spurious underflow exceptions from Bessel functions for
large arguments. (The correct results for large x are roughly
constant * sin or cos (x + constant) / sqrt (x), so no underflow
exceptions should occur based on the final result.)
There are various places underflows may occur in the intermediate
calculations that cause the failures listed in that bug. This patch
fixes problems for the double version where underflows occur in
calculating the intermediate functions P and Q (in particular, x**-12
gets computed while calculating Q). Appropriate approximations are
used for P and Q for arguments at least 0x1p28 and above to avoid the
underflows.
For sufficiently large x - 0x1p129 and above - the code already has a
cut-off to avoid calculating P and Q at all, which means the
approximations -0.125 / x and 0.375 / x can't themselves cause
underflows calculating Q. This cut-off is heuristically reasonable
for the point beyond which Q can be neglected (based on expecting
around 0x1p-64 to be the least absolute value of sin or cos for large
arguments representable in double).
The float versions use a cut-off 0x1p17, which is less heuristically
justifiable but should still only affect values near zeroes of the
Bessel functions where these implementations are intrinsically
inaccurate anyway (bugs 14469-14472), and should serve to avoid
underflows (the float underflow for jn in bug 14155 probably comes
from the recurrence to compute jn). ldbl-96 uses 0x1p129, which may
not really be enough heuristically (0x1p143 or so might be safer - 143
= 64 + 79, number of mantissa bits plus total number of significant
bits in representation) but again should avoid underflows and only
affect values where the code is substantially inaccurate anyway.
ldbl-128 and ldbl-128ibm share a completely different implementation
with no such cut-off, which I propose to fix separately.
Signed-off-by: Keith Packard <keithp@keithp.com>
Add the missing mask for the decomposition of hi+lo which caused some
errors of 1-2 ULP.
This change is taken over from FreeBSD:
95436ce20d
Additionally I've removed some variable assignments which were never
read before being overwritten again in the next 2 lines.
This fix for k_tan.c is a copy from fdlibm version 5.3 (see also
http://www.netlib.org/fdlibm/readme), adjusted to use the macros
available in newlib (SET_LOW_WORD).
This fix reduces the ULP error of the value shown in the fdlibm readme
(tan(1.7765241907548024E+269)) to 0.45 (thereby reducing the error by
1).
This issue only happens for large numbers that get reduced by the range
reduction to a value smaller in magnitude than 2^-28, that is also
reduced an uneven number of times. This seems rather unlikely given that
one ULP is (much) larger than 2^-28 for the values that may cause an
issue. Although given the sheer number of values a double can
represent, it is still possible that there are more affected values,
finding them however will be quite hard, if not impossible.
We also took a look at how another library (libm in FreeBSD) handles the
issue: In FreeBSD the complete if branch which checks for values smaller
than 2^-28 (or rather 2^-27, another change done by FreeBSD) is moved
out of the kernel function and into the external function. This means
that the value that gets checked for this condition is the unreduced
value. Therefore the input value which caused a problem in the
fdlibm/newlib kernel tan will run through the full polynomial, including
the careful calculation of -1/(x+r). So the difference is really whether
r or y is used. r = y + p with p being the result of the polynomial with
1/3*x^3 being the largest (and magnitude defining) value. With x being
<2^-27 we therefore know that p is smaller than y (y has to be at least
the size of the value of x last mantissa bit divided by 2, which is at
least x*2^-51 for doubles) by enough to warrant saying that r ~ y. So
we can conclude that the general implementation of this special case is
the same, FreeBSD simply has a different philosophy on when to handle
especially small numbers.
Make line 47 in sf_trunc.c reachable. While converting the double
precision function trunc to the single precision version truncf an error
was introduced into the special case. This special case is meant to
catch both NaNs and infinities, however qNaNs and infinities work just
fine with the simple return of x (line 51). The only error occurs for
sNaNs where the same sNaN is returned and no invalid exception is
raised.
The comparison c == FP_INFINITE causes the function to return +inf as it
expects x = +inf to always be larger than y. This shortcut causes
several issues as it also returns +inf for the following cases:
- fdim(+inf, +inf), expected (as per C99): +0.0
- fdim(-inf, any non NaN), expected: +0.0
I don't see a reason to keep the comparison as all the infinity cases
return the correct result using just the ternary operation.
While testing the exp function we noticed some errors at the specified
magnitude. Within this range the exp function returns the input value +1
as an output. We chose to run a test of 1m exponentially spaced values
in the ranges [-2^-27,-2^-32] and [2^-32,2^-27] which showed 7603 and
3912 results with an error of >=0.5 ULP (compared with MPFR in 128 bit)
with the highest being 0.56 ULP and 0.53 ULP.
It's easy to fix by changing the magnitude at which the input value +1
is returned from <2^-28 to <2^-32 and using the polynomial instead. This
reduces the number of results with an error of >=0.5 ULP to 485 and 479
in above tests, all of which are exactly 0.5 ULP.
As we were already checking on exp we also took a look at expf. For expf
the magnitude where the input value +1 is returned can be increased from
<2^-28 to <2^-23 without accuracy loss for a slight performance
improvement. To ensure this was the correct value we tested all values
in the ranges [-2^-17,-2^-28] and [2^-28,2^-17] (~92.3m values each).
The single-precision trigonometric functions show rather high errors in
specific ranges starting at about 30000 radians. For example the sinf
procedure produces an error of 7626.55 ULP with the input
5.195880078125e+04 (0x474AF6CD) (compared with MPFR in 128bit
precision). For the test we used 100k values evenly spaced in the range
of [30k, 70k]. The issues are periodic at higher ranges.
This error was introduced when the double precision range reduction was
first converted to float. The shift by 8 bits always returns 0 as iq is
never higher than 255.
The fix reduces the error of the example above to 0.45 ULP, highest
error within the test set fell to 1.31 ULP, which is not perfect, but
still a significant improvement. Testing other previously erroneous
ranges no longer show particularly large accuracy errors.
Most code in newlib already uses unified syntax, but just a couple of
laggards remain. This patch removes these and means the the entire
code base has now been converted.
Having symlinks for these files led to an issue reported to the RTEMS
Project that showed up using some tar for native Windows to unpack the
newlib sources. It creates symlinks in the tar file as copies of the
files the symlinks point to. If the links appear in the tar file before
the source exists, it cannot copy the file.
The solution in this patch is to convert the files that are symbolic
links into simple files which include the file they were linked to.
This should be more portable and avoids the symbolinc link problem.
I think I may have encountered a bug in the implementation of pow:
pow(-1.0, NaN) returns 1.0 when it should return NaN.
Because ix is used to check input vs 1.0 rather than hx, -1.0 is
mistaken for 1.0
This edits licenses held by Berkeley and NetBSD, both of which
have removed the advertising requirement from their licenses.
Signed-off-by: Keith Packard <keithp@keithp.com>
This reverts commit 59362c80e3.
This breaks gnulib's autoconf test for POSIX compatibility of
fflush/fseek. After fflush/fseek, ftello and lseek are out of
sync, with lseek having the wrong offset. This breaks backward
compatibility with Cygwin applications.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- also change the handling of default_newlib_reent_check_verify to
be the same as other default variables in configure.host
- regenerate newlib/configure
If we had architecture-specific exception bits, we could just set them
to match the processor, but instead ieeefp.h is shared by all targets
so we need to map between the public values and the register contents.
Signed-off-by: Keith Packard <keithp@keithp.com>
This makes the fpsetround function actually do something rather than
just return -1 due to the default 'fall-through' behavior of the switch
statement.
Signed-off-by: Keith Packard <keithp@keithp.com>
In the two helper functions that _dcvt calls for 'f' and 'e' mode, if
there are no digits to display after the decimal point, don't add one.
Signed-off-by: Keith Packard <keithp@keithp.com>
Leading zeros after the decimal point should not count
towards the 'ndigits' limit.
This makes gcvt match glibc and the posix gcvt man page.
Signed-off-by: Keith Packard <keithp@keithp.com>
Even if the number is really small and this means showing *no* digits.
This makes newlib match glibc, and the fcvt posix man page.
Signed-off-by: Keith Packard <keithp@keithp.com>
sf_log1p was using __math_divzero and __math_invalid, which
drag in a pile of double-precision code. Switch to using the
single-precision variants. This also required making those
available in __OBSOLETE_MATH mode.
Signed-off-by: Keith Packard <keithp@keithp.com>
newlib wide char conversion functions were updated to
Unicode 11 on 2019-01-12
update standard symbol __STDC_ISO_10646__ to
Unicode 11 release date 2018-06-05 for Cygwin
The call to fflush was invalidating the read buffer, preventing relative
seeks to positions that would have been inside the read buffer from
being optimized. The call to srefill would then re-read mostly the same
data that was initially in the read buffer.
s[0:3] contain a descriptor used to set up the initial value of the
stack, but only the lower 48 bits of s[0:1] are currently used.
The reent marker is currently set in s3, but by stashing it in the
upper 16 bits of s[0:1] instead, s3 can be freed up for other purposes.
This change is based on the FreeBSD commit:
Author: asomers <asomers@FreeBSD.org>
Date: Mon Jul 30 15:46:40 2018 +0000
Make timespecadd(3) and friends public
The timespecadd(3) family of macros were imported from NetBSD back in
r35029. However, they were initially guarded by #ifdef _KERNEL. In the
meantime, we have grown at least 28 syscalls that use timespecs in some
way, leading many programs both inside and outside of the base system to
redefine those macros. It's better just to make the definitions public.
Our kernel currently defines two-argument versions of timespecadd and
timespecsub. NetBSD, OpenBSD, and FreeDesktop.org's libbsd, however, define
three-argument versions. Solaris also defines a three-argument version, but
only in its kernel. This revision changes our definition to match the
common three-argument version.
Bump _FreeBSD_version due to the breaking KPI change.
Discussed with: cem, jilles, ian, bde
Differential Revision: https://reviews.freebsd.org/D14725
The TI proprietary toolchain uses nonstandard names for some math
library functions. In order to achieve ABI compatibility between
GNU and TI toolchains, add support for the TI function names.
Signed-off-by: Dimitar Dimitrov <dimitar@dinux.eu>
- change sys/reent.h to replace _REENT_CHECK_DEBUG with
_REENT_CHECK_VERIFY which when set asserts that any memory
allocated is non-NULL and calls __assert_func directly
- add new --enable-newlib-reent-check-verify configure option
- add support for configure.host to specify default for
newlib_reent_check_verify
- add _REENT_CHECK_VERIFY macro support to acconfig.h and newlib.hin
- add new eBalloc macro to mprec.h which calls Balloc and
aborts if Balloc fails due to out of memory
- change mprec.c functions that use Balloc without checking to use eBalloc instead
- fix dtoa.c to use eBalloc
The ioctl(2) is intended to provide more details about the cause of
the down for the link.
Eventually we might define a comprehensive list of codes for the
situations. But interface also allows the driver to provide free-form
null-terminated ASCII string to provide arbitrary non-formalized
information. Sample implementation exists for mlx5(4), where the
string is fetched from firmware controlling the port.
Reviewed by: hselasky, rrs
Sponsored by: Mellanox Technologies
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D21527
KTLS adds support for in-kernel framing and encryption of Transport
Layer Security (1.0-1.2) data on TCP sockets. KTLS only supports
offload of TLS for transmitted data. Key negotation must still be
performed in userland. Once completed, transmit session keys for a
connection are provided to the kernel via a new TCP_TXTLS_ENABLE
socket option. All subsequent data transmitted on the socket is
placed into TLS frames and encrypted using the supplied keys.
Any data written to a KTLS-enabled socket via write(2), aio_write(2),
or sendfile(2) is assumed to be application data and is encoded in TLS
frames with an application data type. Individual records can be sent
with a custom type (e.g. handshake messages) via sendmsg(2) with a new
control message (TLS_SET_RECORD_TYPE) specifying the record type.
At present, rekeying is not supported though the in-kernel framework
should support rekeying.
KTLS makes use of the recently added unmapped mbufs to store TLS
frames in the socket buffer. Each TLS frame is described by a single
ext_pgs mbuf. The ext_pgs structure contains the header of the TLS
record (and trailer for encrypted records) as well as references to
the associated TLS session.
KTLS supports two primary methods of encrypting TLS frames: software
TLS and ifnet TLS.
Software TLS marks mbufs holding socket data as not ready via
M_NOTREADY similar to sendfile(2) when TLS framing information is
added to an unmapped mbuf in ktls_frame(). ktls_enqueue() is then
called to schedule TLS frames for encryption. In the case of
sendfile_iodone() calls ktls_enqueue() instead of pru_ready() leaving
the mbufs marked M_NOTREADY until encryption is completed. For other
writes (vn_sendfile when pages are available, write(2), etc.), the
PRUS_NOTREADY is set when invoking pru_send() along with invoking
ktls_enqueue().
A pool of worker threads (the "KTLS" kernel process) encrypts TLS
frames queued via ktls_enqueue(). Each TLS frame is temporarily
mapped using the direct map and passed to a software encryption
backend to perform the actual encryption.
(Note: The use of PHYS_TO_DMAP could be replaced with sf_bufs if
someone wished to make this work on architectures without a direct
map.)
KTLS supports pluggable software encryption backends. Internally,
Netflix uses proprietary pure-software backends. This commit includes
a simple backend in a new ktls_ocf.ko module that uses the kernel's
OpenCrypto framework to provide AES-GCM encryption of TLS frames. As
a result, software TLS is now a bit of a misnomer as it can make use
of hardware crypto accelerators.
Once software encryption has finished, the TLS frame mbufs are marked
ready via pru_ready(). At this point, the encrypted data appears as
regular payload to the TCP stack stored in unmapped mbufs.
ifnet TLS permits a NIC to offload the TLS encryption and TCP
segmentation. In this mode, a new send tag type (IF_SND_TAG_TYPE_TLS)
is allocated on the interface a socket is routed over and associated
with a TLS session. TLS records for a TLS session using ifnet TLS are
not marked M_NOTREADY but are passed down the stack unencrypted. The
ip_output_send() and ip6_output_send() helper functions that apply
send tags to outbound IP packets verify that the send tag of the TLS
record matches the outbound interface. If so, the packet is tagged
with the TLS send tag and sent to the interface. The NIC device
driver must recognize packets with the TLS send tag and schedule them
for TLS encryption and TCP segmentation. If the the outbound
interface does not match the interface in the TLS send tag, the packet
is dropped. In addition, a task is scheduled to refresh the TLS send
tag for the TLS session. If a new TLS send tag cannot be allocated,
the connection is dropped. If a new TLS send tag is allocated,
however, subsequent packets will be tagged with the correct TLS send
tag. (This latter case has been tested by configuring both ports of a
Chelsio T6 in a lagg and failing over from one port to another. As
the connections migrated to the new port, new TLS send tags were
allocated for the new port and connections resumed without being
dropped.)
ifnet TLS can be enabled and disabled on supported network interfaces
via new '[-]txtls[46]' options to ifconfig(8). ifnet TLS is supported
across both vlan devices and lagg interfaces using failover, lacp with
flowid enabled, or lacp with flowid enabled.
Applications may request the current KTLS mode of a connection via a
new TCP_TXTLS_MODE socket option. They can also use this socket
option to toggle between software and ifnet TLS modes.
In addition, a testing tool is available in tools/tools/switch_tls.
This is modeled on tcpdrop and uses similar syntax. However, instead
of dropping connections, -s is used to force KTLS connections to
switch to software TLS and -i is used to switch to ifnet TLS.
Various sysctls and counters are available under the kern.ipc.tls
sysctl node. The kern.ipc.tls.enable node must be set to true to
enable KTLS (it is off by default). The use of unmapped mbufs must
also be enabled via kern.ipc.mb_use_ext_pgs to enable KTLS.
KTLS is enabled via the KERN_TLS kernel option.
This patch is the culmination of years of work by several folks
including Scott Long and Randall Stewart for the original design and
implementation; Drew Gallatin for several optimizations including the
use of ext_pgs mbufs, the M_NOTREADY mechanism for TLS records
awaiting software encryption, and pluggable software crypto backends;
and John Baldwin for modifications to support hardware TLS offload.
Reviewed by: gallatin, hselasky, rrs
Obtained from: Netflix
Sponsored by: Netflix, Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D21277
IPPROTO 33 is DCCP in the IANA Registry:
https://www.iana.org/assignments/protocol-numbers/protocol-numbers.xhtml
IPPROTO_SEP was added about 20 years ago in r33804. The entries were added
straight from RFC1700, without regard to whether they were used.
The reference in RFC1700 for SEP is '[JC120] <mystery contact>', this is an
indication that the protocol number was probably in use in a private network.
As RFC1700 is no longer the authoritative list of internet numbers and that
IANA assinged 33 to DCCP in RFC4340, change the header to the actual
authoritative source.
Reviewed by: Richard Scheffenegger, bz
Approved by: bz (mentor)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D21178
being used at NF as well as sets in some of the groundwork for
committing BBR. The hpts system is updated as well as some other needed
utilities for the entrance of BBR. This is actually part 1 of 3 more
needed commits which will finally complete with BBRv1 being added as a
new tcp stack.
Sponsored by: Netflix Inc.
Differential Revision: https://reviews.freebsd.org/D20834
multiple unmapped pages.
Unmapped mbufs allow sendfile to carry multiple pages of data in a
single mbuf, without mapping those pages. It is a requirement for
Netflix's in-kernel TLS, and provides a 5-10% CPU savings on heavy web
serving workloads when used by sendfile, due to effectively
compressing socket buffers by an order of magnitude, and hence
reducing cache misses.
For this new external mbuf buffer type (EXT_PGS), the ext_buf pointer
now points to a struct mbuf_ext_pgs structure instead of a data
buffer. This structure contains an array of physical addresses (this
reduces cache misses compared to an earlier version that stored an
array of vm_page_t pointers). It also stores additional fields needed
for in-kernel TLS such as the TLS header and trailer data that are
currently unused. To more easily detect these mbufs, the M_NOMAP flag
is set in m_flags in addition to M_EXT.
Various functions like m_copydata() have been updated to safely access
packet contents (using uiomove_fromphys()), to make things like BPF
safe.
NIC drivers advertise support for unmapped mbufs on transmit via a new
IFCAP_NOMAP capability. This capability can be toggled via the new
'nomap' and '-nomap' ifconfig(8) commands. For NIC drivers that only
transmit packet contents via DMA and use bus_dma, adding the
capability to if_capabilities and if_capenable should be all that is
required.
If a NIC does not support unmapped mbufs, they are converted to a
chain of mapped mbufs (using sf_bufs to provide the mapping) in
ip_output or ip6_output. If an unmapped mbuf requires software
checksums, it is also converted to a chain of mapped mbufs before
computing the checksum.
Submitted by: gallatin (earlier version)
Reviewed by: gallatin, hselasky, rrs
Discussed with: ae, kp (firewalls)
Relnotes: yes
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D20616
into using a STAILQ instead of a linear array.
The multicast memberships for the inpcb structure are protected by a
non-sleepable lock, INP_WLOCK(), which needs to be dropped when
calling the underlying possibly sleeping if_ioctl() method. When using
a linear array to keep track of multicast memberships, the computed
memory location of the multicast filter may suddenly change, due to
concurrent insertion or removal of elements in the linear array. This
in turn leads to various invalid memory access issues and kernel
panics.
To avoid this problem, put all multicast memberships on a STAILQ based
list. Then the memory location of the IPv4 and IPv6 multicast filters
become fixed during their lifetime and use after free and memory leak
issues are easier to track, for example by: vmstat -m | grep multi
All list manipulation has been factored into inline functions
including some macros, to easily allow for a future hash-list
implementation, if needed.
This patch has been tested by pho@ .
Differential Revision: https://reviews.freebsd.org/D20080
Reviewed by: markj @
MFC after: 1 week
Sponsored by: Mellanox Technologies
protections.
A new macro PROT_MAX() alters a protection value so it can be OR'd with
a regular protection value to specify the maximum permissions. If
present, these flags specify the maximum permissions.
While these flags are non-portable, they can be used in portable code
with simple ifdefs to expand PROT_MAX() to 0.
This change allows (e.g.) a region that must be writable during run-time
linking or JIT code generation to be made permanently read+execute after
writes are complete. This complements W^X protections allowing more
precise control by the programmer.
This change alters mprotect argument checking and returns an error when
unhandled protection flags are set. This differs from POSIX (in that
POSIX only specifies an error), but is the documented behavior on Linux
and more closely matches historical mmap behavior.
In addition to explicit setting of the maximum permissions, an
experimental sysctl vm.imply_prot_max causes mmap to assume that the
initial permissions requested should be the maximum when the sysctl is
set to 1. PROT_NONE mappings are excluded from this for compatibility
with rtld and other consumers that use such mappings to reserve
address space before mapping contents into part of the reservation. A
final version this is expected to provide per-binary and per-process
opt-in/out options and this sysctl will go away in its current form.
As such it is undocumented.
Reviewed by: emaste, kib (prior version), markj
Additional suggestions from: alc
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D18880
DTR are asserted. Some development boards for example will reset on DTR,
and some radio interfaces will transmit on RTS.
This patch allows "stty -f /dev/ttyu9.init -rtsdtr" to prevent
RTS and DTR from being asserted on open(), allowing these devices
to be used without problems.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D20031
Error messages in gai_strerror(3) vary largely among OSs.
For new software we largely replaced the obsoleted EAI_NONAME and
with EAI_NODATA but we never updated the corresponding message to better
match the intended use. We also have references to ai_flags and ai_family
which are not very descriptive for non-developer end users.
Bring new new error messages based on informational RFC 3493, which has
obsoleted RFC 2553, and make them consistent among the header adn
manpage.
MFC after: 1 month
Differentical Revision: D18630
The FACE Technical Standard, Edition 3.0 and later require the
definition of the subcommand SOCKCLOSE in <devctl.h>.
Reference: https://www.opengroup.org/face
- revert previous fix which altered sys/stat.h
- fix libgloss/cris/gensyscalls to undef st_atime, st_mtime,
and st_ctime macros which cannot be used with new_stat structure
Teach makedocbook how to handle some new things seen in the makedoc markup
since eae68bfc:
- 'link with' lines appearing in SYNOPSIS sections
Also, don't raise a NoneType exception when there's something we don't
know how to handle in a SYNOPSIS section, just exit.
The default implementation of the fenv.h methods return
-EOPNOTSUP. Some of these have implementations appropriate
for soft-float.
The intention of the new fenv.h is that it be portable
and that architectures provide their own implementation
of sys/fenv.h.
dougm
trasz
jah
mjg
rlibby
dab
jhb
Torbjörn SVENSSON via Newlib
Thomas Wolff
Torbjörn SVENSSON
Christophe Lyon
Jojo R
Keith Packard
Corinna Vinschen
Jozef Lawrynowicz
Jon Turney
Craig Blackmore
Sebastian Huber
Eshan dhawan
Aschref Ben Thabet
Jeff Johnston
Szabolcs Nagy
Joseph S. Myers
Fabian Schriever
Joel Sherrill
Richard Earnshaw
Thomas Wolff
Nicolas Brunie
Anthony Green
Bruno Haible
Brian Inglis
Bastien Bouclet
Kwok Cheung Yeung
imp
Dimitar Dimitrov
Christos Gentsos
kib
thj
rrs
hselasky
brooks
shurd
pfg
Giacomo Tesio
Alexander Fedotov