The __XSI_VISIBLE is not enabled by default in Newlib. This is an
incompatiblity between FreeBSD and glibc.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
with name SO_DOMAIN to get the domain of a socket.
This is helpful when testing and Solaris and Linux have the same
socket option using the same name.
Reviewed by: bcr@, rrs@
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D16791
queues per bucket.
There is a hashing algorithm which should distribute IPv6 reassembly
queues across the available buckets in a relatively even way. However,
if there is a flaw in the hashing algorithm which allows a large number
of IPv6 fragment reassembly queues to end up in a single bucket, a per-
bucket limit could help mitigate the performance impact of this flaw.
Implement such a limit, with a default of twice the maximum number of
reassembly queues divided by the number of buckets. Recalculate the
limit any time the maximum number of reassembly queues changes.
However, allow the user to override the value using a sysctl
(net.inet6.ip6.maxfragbucketsize).
Reviewed by: jhb
Security: FreeBSD-SA-18:10.ip
Security: CVE-2018-6923
The IPv4 fragment reassembly code supports a limit on the number of
fragments per packet. The default limit is currently 17 fragments.
Among other things, this limit serves to limit the number of fragments
the code must parse when trying to reassembly a packet.
Add a limit to the IPv6 reassembly code. By default, limit a packet
to 65 fragments (64 on the queue, plus one final fragment to complete
the packet). This allows an average fragment size of 1,008 bytes, which
should be sufficient to hold a fragment. (Recall that the IPv6 minimum
MTU is 1280 bytes. Therefore, this configuration allows a full-size
IPv6 packet to be fragmented on a link with the minimum MTU and still
carry approximately 272 bytes of headers before the fragmented portion
of the packet.)
Users can adjust this limit using the net.inet6.ip6.maxfragsperpacket
sysctl.
Reviewed by: jhb
Security: FreeBSD-SA-18:10.ip
Security: CVE-2018-6923
Rack includes the following features: - A different SACK processing
scheme (the old sack structures are not used). - RACK (Recent
acknowledgment) where counting dup-acks is no longer done instead time
is used to knwo when to retransmit. (see the I-D) - TLP (Tail Loss
Probe) where we will probe for tail-losses to attempt to try not to take
a retransmit time-out. (see the I-D) - Burst mitigation using TCPHTPS -
PRR (partial rate reduction) see the RFC.
Once built into your kernel, you can select this stack by either
socket option with the name of the stack is "rack" or by setting
the global sysctl so the default is rack.
Note that any connection that does not support SACK will be kicked
back to the "default" base FreeBSD stack (currently known as "default").
To build this into your kernel you will need to enable in your
kernel:
makeoptions WITH_EXTRA_TCP_STACKS=1
options TCPHPTS
Sponsored by: Netflix Inc.
Differential Revision: https://reviews.freebsd.org/D15525
This patch adds a new socket option, SO_REUSEPORT_LB, which allow multiple
programs or threads to bind to the same port and incoming connections will be
load balanced using a hash function.
Most of the code was copied from a similar patch for DragonflyBSD.
However, in DragonflyBSD, load balancing is a global on/off setting and can not
be set per socket. This patch allows for simultaneous use of both the current
SO_REUSEPORT and the new SO_REUSEPORT_LB options on the same system.
Required changes to structures:
Globally change so_options from 16 to 32 bit value to allow for more options.
Add hashtable in pcbinfo to hold all SO_REUSEPORT_LB sockets.
Limitations:
As DragonflyBSD, a load balance group is limited to 256 pcbs (256 programs or
threads sharing the same socket).
This is a substantially different contribution as compared to its original
incarnation at svn r332894 and reverted at svn r332967. Thanks to rwatson@
for the substantive feedback that is included in this commit.
Submitted by: Johannes Lundberg <johalun0@gmail.com>
Obtained from: DragonflyBSD
Relnotes: Yes
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D11003
Part 3 of many ...
The VPC framework relies heavily on cloning pseudo interfaces
(vmnics, vpc switch, vcpswitch port, hostif, vxlan if, etc).
This pulls in that piece. Some ancillary changes get pulled
in as a side effect.
Reviewed by: shurd@
Approved by: sbruno@
Sponsored by: Joyent, Inc.
Differential Revision: https://reviews.freebsd.org/D15347
This patch adds a new socket option, SO_REUSEPORT_LB, which allow multiple
programs or threads to bind to the same port and incoming connections will be
load balanced using a hash function.
Most of the code was copied from a similar patch for DragonflyBSD.
However, in DragonflyBSD, load balancing is a global on/off setting and can not
be set per socket. This patch allows for simultaneous use of both the current
SO_REUSEPORT and the new SO_REUSEPORT_LB options on the same system.
Required changes to structures
Globally change so_options from 16 to 32 bit value to allow for more options.
Add hashtable in pcbinfo to hold all SO_REUSEPORT_LB sockets.
Limitations
As DragonflyBSD, a load balance group is limited to 256 pcbs
(256 programs or threads sharing the same socket).
Submitted by: Johannes Lundberg <johanlun0@gmail.com>
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D11003
Use an accessor to access ifgr_group and ifgr_groups.
Use an macro CASE_IOC_IFGROUPREQ(cmd) in place of case statements such
as "case SIOCAIFGROUP:". This avoids poluting the switch statements
with large numbers of #ifdefs.
Reviewed by: kib
Obtained from: CheriBSD
MFC after: 1 week
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14960
This fixes 32-bit compat (no ioctl command defintions are required
as struct ifreq is the same size). This is believed to be sufficent to
fully support ifconfig on 32-bit systems.
Reviewed by: kib
Obtained from: CheriBSD
MFC after: 1 week
Relnotes: yes
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14900
Add a new "interleave" allocation policy which stripes pages across
domains with a stride or width keeping contiguity within a multi-page
region.
Move the kernel to the dedicated numbered cpuset #2 making it possible
to assign kernel threads and memory policy separately from user. This
also eliminates the need for the complicated interrupt binding code.
Add a sysctl API for viewing and manipulating domainsets. Refactor some
of the cpuset_t manipulation code using the generic bitset type so that
it can be used for both. This probably belongs in a dedicated subr file.
Attempt to improve the include situation.
Reviewed by: kib
Discussed with: jhb (cpuset parts)
Tested by: pho (before review feedback)
Sponsored by: Netflix, Dell/EMC Isilon
Differential Revision: https://reviews.freebsd.org/D14839
Make all kernel accesses to ifru_buffer go via access functions
which take the process ABI into account and use an appropriate union
to access members in the correct place in struct ifreq.
Reviewed by: kib
Obtained from: CheriBSD
MFC after: 1 week
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14846
According to 802.1Q-2014, VLAN tagged packets with VLAN id 0 should be
considered as untagged, and only PCP and DEI values from the VLAN tag
are meaningful. See for instance
https://www.cisco.com/c/en/us/td/docs/switches/connectedgrid/cg-switch-sw-master/software/configuration/guide/vlan0/b_vlan_0.html.
Make it possible to specify PCP value for outgoing packets on an
ethernet interface. When PCP is supplied, the tag is appended, VLAN
id set to 0, and PCP is filled by the supplied value. The code to do
VLAN tag encapsulation is refactored from the if_vlan.c and moved into
if_ethersubr.c.
Drivers might have issues with filtering VID 0 packets on
receive. This bug should be fixed for each driver.
Reviewed by: ae (previous version), hselasky, melifaro
Sponsored by: Mellanox Technologies
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D14702
Include _uio.h instead of uio.h in several headers to reduce header
polution.
Fix a few places that relied on header polution to get the uio.h header.
I have not moved struct uio as many more things that use it rely on
header polution to get other definitions from uio.h.
Reviewed by: cem, kib, markj
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14811
which we discussed at the developer summits at BSDCan and BSDCam in 2017.
The TCP Blackbox Recorder allows you to capture events on a TCP connection
in a ring buffer. It stores metadata with the event. It optionally stores
the TCP header associated with an event (if the event is associated with a
packet) and also optionally stores information on the sockets.
It supports setting a log ID on a TCP connection and using this to correlate
multiple connections that share a common log ID.
You can log connections in different modes. If you are doing a coordinated
test with a particular connection, you may tell the system to put it in
mode 4 (continuous dump). Or, if you just want to monitor for errors, you
can put it in mode 1 (ring buffer) and dump all the ring buffers associated
with the connection ID when we receive an error signal for that connection
ID. You can set a default mode that will be applied to a particular ratio
of incoming connections. You can also manually set a mode using a socket
option.
This commit includes only basic probes. rrs@ has added quite an abundance
of probes in his TCP development work. He plans to commit those soon.
There are user-space programs which we plan to commit as ports. These read
the data from the log device and output pcapng files, and then let you
analyze the data (and metadata) in the pcapng files.
Reviewed by: gnn (previous version)
Obtained from: Netflix, Inc.
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D11085
These macros take an existing ioctl(2) command and replace the length
with the specified length or length of the specified type respectively.
These can be used to define commands for 32-bit compatibility with fewer
opportunities for cut-and-paste errors then a whole new definition.
Reviewed by: cem, kib
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14706
[RFC7413]. It also includes a pre-shared key mode of operation in which
the server requires the client to be in possession of a shared secret in
order to successfully open TFO connections with that server.
The names of some existing fastopen sysctls have changed (e.g.,
net.inet.tcp.fastopen.enabled -> net.inet.tcp.fastopen.server_enable).
Reviewed by: tuexen
MFC after: 1 month
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D14047
that had the IPv6 fragmentation header:
o Neighbor Solicitation
o Neighbor Advertisement
o Router Solicitation
o Router Advertisement
o Redirect
Introduce M_FRAGMENTED mbuf flag, and set it after IPv6 fragment reassembly
is completed. Then check the presence of this flag in correspondig ND6
handling routines.
PR: 224247
MFC after: 2 weeks
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Mainly focus on files that use BSD 3-Clause license.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
Mainly focus on files that use BSD 3-Clause license.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
for SO_TIMESTAMP and other similar socket options.
Provide new control message SCM_TIME_INFO to supply information about
timestamp. Currently it indicates that the timestamp was
hardware-assisted and high-precision, for software timestamps the
message is not returned. Reserved fields are added to ABI to report
additional info about it, it is expected that raw hardware clock value
might be useful for some applications.
Reviewed by: gallatin (previous version), hselasky
Sponsored by: Mellanox Technologies
MFC after: 2 weeks
X-Differential revision: https://reviews.freebsd.org/D12638
in nanoseconds from boot for the received packets.
The rcv_tstmp field overlaps the place of Ln header length indicators,
not used by received packets. The basic pkthdr rearrangement change
in sys/mbuf.h was provided by gallatin.
There are two accompanying M_ flags: M_TSTMP means that there is the
timestamp (and it was generated by hardware).
Another flag M_TSTMP_HPREC indicates that the timestamp is
high-precision. Practically M_TSTMP_HPREC means that hardware
provided additional precision comparing with the stamps when the flag
is not set. E.g., for ConnectX all packets are stamped by hardware
when PCIe transaction to write out the completion descriptor is
performed, but PTP packet are stamped on port. For Intel cards, when
PTP assist is enabled, only PTP packets are stamped in the limited
number of registers, so if Intel cards ever start support this
mechanism, they would always set M_TSTMP | M_TSTMP_HPREC if hardware
timestamp is present for the given packet.
Add IFCAP_HWRXTSTMP interface capability to indicate the support for
hardware rx timestamping, and ifconfig(8) command to toggle it.
Based on the patch by: gallatin
Reviewed by: gallatin (previous version), hselasky
Sponsored by: Mellanox Technologies
MFC after: 2 weeks (? mbuf KBI issue)
X-Differential revision: https://reviews.freebsd.org/D12638
It will be needed by hn(4) to configure its RSS key and hash
type/function in the transparent VF mode in order to match VF's
RSS settings. The description of the transparent VF mode and
the RSS hash value issue are here:
https://svnweb.freebsd.org/base?view=revision&revision=322299https://svnweb.freebsd.org/base?view=revision&revision=322485
These are generic enough to promise two independent IOCs instead
of abusing SIOCGDRVSPEC.
Setting RSS key and hash type/function is a different story,
which probably requires more discussion.
Comment about UDP_{IPV4,IPV6,IPV6_EX} were only in the patch
in the review request; these hash types are standardized now.
Reviewed by: gallatin
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D12174
They are defined by XSI or newer SUS.
This is a follow-up to r318780.
Reported by: jbeich
Obtained from: DragonflyBSD commit e08b3836c962
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Guard, requested by the MAP_GUARD mmap(2) flag, prevents the reuse of
the allocated address space, but does not allow instantiation of the
pages in the range. It is useful for more explicit support for usual
two-stage reserve then commit allocators, since it prevents accidental
instantiation of the mapping, e.g. by mprotect(2).
Use guards to reimplement stack grow code. Explicitely track stack
grow area with the guard, including the stack guard page. On stack
grow, trivial shift of the guard map entry and stack map entry limits
makes the stack expansion. Move the code to detect stack grow and
call vm_map_growstack(), from vm_fault() into vm_map_lookup().
As result, it is impossible to get random mapping to occur in the
stack grow area, or to overlap the stack guard page.
Enable stack guard page by default.
Reviewed by: alc, markj
Man page update reviewed by: alc, bjk, emaste, markj, pho
Tested by: pho, Qualys
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D11306 (man pages)
o Separate fields of struct socket that belong to listening from
fields that belong to normal dataflow, and unionize them. This
shrinks the structure a bit.
- Take out selinfo's from the socket buffers into the socket. The
first reason is to support braindamaged scenario when a socket is
added to kevent(2) and then listen(2) is cast on it. The second
reason is that there is future plan to make socket buffers pluggable,
so that for a dataflow socket a socket buffer can be changed, and
in this case we also want to keep same selinfos through the lifetime
of a socket.
- Remove struct struct so_accf. Since now listening stuff no longer
affects struct socket size, just move its fields into listening part
of the union.
- Provide sol_upcall field and enforce that so_upcall_set() may be called
only on a dataflow socket, which has buffers, and for listening sockets
provide solisten_upcall_set().
o Remove ACCEPT_LOCK() global.
- Add a mutex to socket, to be used instead of socket buffer lock to lock
fields of struct socket that don't belong to a socket buffer.
- Allow to acquire two socket locks, but the first one must belong to a
listening socket.
- Make soref()/sorele() to use atomic(9). This allows in some situations
to do soref() without owning socket lock. There is place for improvement
here, it is possible to make sorele() also to lock optionally.
- Most protocols aren't touched by this change, except UNIX local sockets.
See below for more information.
o Reduce copy-and-paste in kernel modules that accept connections from
listening sockets: provide function solisten_dequeue(), and use it in
the following modules: ctl(4), iscsi(4), ng_btsocket(4), ng_ksocket(4),
infiniband, rpc.
o UNIX local sockets.
- Removal of ACCEPT_LOCK() global uncovered several races in the UNIX
local sockets. Most races exist around spawning a new socket, when we
are connecting to a local listening socket. To cover them, we need to
hold locks on both PCBs when spawning a third one. This means holding
them across sonewconn(). This creates a LOR between pcb locks and
unp_list_lock.
- To fix the new LOR, abandon the global unp_list_lock in favor of global
unp_link_lock. Indeed, separating these two locks didn't provide us any
extra parralelism in the UNIX sockets.
- Now call into uipc_attach() may happen with unp_link_lock hold if, we
are accepting, or without unp_link_lock in case if we are just creating
a socket.
- Another problem in UNIX sockets is that uipc_close() basicly did nothing
for a listening socket. The vnode remained opened for connections. This
is fixed by removing vnode in uipc_close(). Maybe the right way would be
to do it for all sockets (not only listening), simply move the vnode
teardown from uipc_detach() to uipc_close()?
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D9770
INHERIT_ZERO is an OpenBSD feature.
When a page is marked as such, it would be zeroed
upon fork().
This would be used in new arc4random(3) functions.
PR: 182610
Reviewed by: kib (earlier version)
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D427
Renumber cluase 4 to 3, per what everybody else did when BSD granted
them permission to remove clause 3. My insistance on keeping the same
numbering for legal reasons is too pedantic, so give up on that point.
Submitted by: Jan Schaumann <jschauma@stevens.edu>
Pull Request: https://github.com/freebsd/freebsd/pull/96
Our mprotect() function seems to take a "const void *" address to the
pages whose permissions need to be adjusted. POSIX uses "void *". Simply
stick to the POSIX one to prevent us from writing unportable code.
PR: 211423 (exp-run)
Tested by: antoine@ (Thanks!)
for libthr.so.3, without breaking the ABI. Special value is stored in
the lock pointer to indicate shared lock, and offline page in the shared
memory is allocated to store the actual lock.
Reviewed by: vangyzen (previous version)
Discussed with: deischen, emaste, jhb, rwatson,
Martin Simmons <martin@lispworks.com>
Tested by: pho
Sponsored by: The FreeBSD Foundation
operations. File type-specific logic is now placed in the mmap hook
implementation rather than requiring it to be placed in
sys/vm/vm_mmap.c. This hook allows new file types to support mmap() as
well as potentially allowing mmap() for existing file types that do not
currently support any mapping.
The vm_mmap() function is now split up into two functions. A new
vm_mmap_object() function handles the "back half" of vm_mmap() and accepts
a referenced VM object to map rather than a (handle, handle_type) tuple.
vm_mmap() is now reduced to converting a (handle, handle_type) tuple to a
a VM object and then calling vm_mmap_object() to handle the actual mapping.
The vm_mmap() function remains for use by other parts of the kernel
(e.g. device drivers and exec) but now only supports mapping vnodes,
character devices, and anonymous memory.
The mmap() system call invokes vm_mmap_object() directly with a NULL object
for anonymous mappings. For mappings using a file descriptor, the
descriptors fo_mmap() hook is invoked instead. The fo_mmap() hook is
responsible for performing type-specific checks and adjustments to
arguments as well as possibly modifying mapping parameters such as flags
or the object offset. The fo_mmap() hook routines then call
vm_mmap_object() to handle the actual mapping.
The fo_mmap() hook is optional. If it is not set, then fo_mmap() will
fail with ENODEV. A fo_mmap() hook is implemented for regular files,
character devices, and shared memory objects (created via shm_open()).
While here, consistently use the VM_PROT_* constants for the vm_prot_t
type for the 'prot' variable passed to vm_mmap() and vm_mmap_object()
as well as the vm_mmap_vnode() and vm_mmap_cdev() helper routines.
Previously some places were using the mmap()-specific PROT_* constants
instead. While this happens to work because PROT_xx == VM_PROT_xx,
using VM_PROT_* is more correct.
Differential Revision: https://reviews.freebsd.org/D2658
Reviewed by: alc (glanced over), kib
MFC after: 1 month
Sponsored by: Chelsio
and MAP_NORESERVE flags to mmap(2). Older binaries are still permitted
to use these flags.
PR: 193961 (exp-run in ports)
Differential Revision: https://reviews.freebsd.org/D848
Reviewed by: kib
to add type-specific information to struct kinfo_file. - Move the
various fill_*_info() methods out of kern_descrip.c and into the various
file type implementations. - Rework the support for kinfo_ofile to
generate a suitable kinfo_file object for each file and then convert
that to a kinfo_ofile structure rather than keeping a second, different
set of code that directly manipulates type-specific file information. -
Remove the shm_path() and ksem_info() layering violations.
Differential Revision: https://reviews.freebsd.org/D775
Reviewed by: kib, glebius (earlier version)
It should be combined with MAP_FIXED, and prevents the request from
deleting existing mappings in the region, failing instead.
Reviewed by: alc
Discussed with: jhb
Tested by: markj, pho (previous version, as part of the bigger patch)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
to request that a mapping use an address in the first 2GB of the
process's address space. This flag should have the same semantics as the
same flag on Linux.
To facilitate this, add a new parameter to vm_map_find() that specifies an
optional maximum virtual address. While here, fix several callers of
vm_map_find() to use a VMFS_* constant for the findspace argument instead of
TRUE and FALSE.
Reviewed by: alc
Approved by: re (kib)
for posix shmfd. Add MAC framework entries for posix shm read and write.
Do not allow implicit extension of the underlying memory segment past
the limit set by ftruncate(2) by either of the syscalls. Read and
write returns short i/o, lseek(2) fails with EINVAL when resulting
offset does not fit into the limit.
Discussed with: alc
Tested by: pho
Sponsored by: The FreeBSD Foundation
Add __tls_get_addr() for all targets to crt0. This is not only used on
ARM. In particular, it is used on RISC-V. This helps to adequately
support the GCC libgomp.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de
Exotic RTEMS targets can define this back to int32_t as an exception if
there are good reasons.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
- From: Cesar Philippidis <cesar@codesourcery.com>
Date: Tue, 10 Apr 2018 14:43:42 -0700
Subject: [PATCH] nvptx port
This port adds support for Nvidia GPU's, which are primarily used as
offload accelerators in OpenACC and OpenMP.
Linux and FreeBSD use int as well. In addition, this fixes an Ada
incompatiblity problem on 64-bit targets. See also GCC:
gcc/ada/libgnarl/s-osinte__rtems.ads
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
For whatever reason FreeBSD renames several functions provided by
<arpa/inet.h> and uses weak references to provide the standard function
names. This causes problems on targets lacking proper support for weak
references. We do not need this function renaming on RTEMS.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
According to the FreeBSD man page BIT_CMP() returns true in case the two
sets are NOT equal.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Add the POSIX header files
* arpa/inet.h
* net/if.h
* netdb.h
* netinet/in.h
* netinet/tcp.h
* sys/socket.h
* sys/syslog.h
* sys/uio.h
* sys/un.h
* syslog.h
* termios.h
and their dependencies for RTEMS. The origin of these files is the
latest FreeBSD.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Make the RTEMS <sys/cpuset.h> compatible with the latest FreeBSD
version.
Fix the CPU_COPY() parameter order, see also:
https://devel.rtems.org/ticket/3023
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Use a dedicated header file <machine/_bitcount.h> to avoid cyclic header
dependencies in future changes.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Increase the MSIZE for RTEMS to be in line with the latest FreeBSD
version. The legacy network stack of RTEMS will provides its own
definition.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Update the RTEMS <machine/param.h> and <sys/param.h> to be compatible
with the latest FreeBSD version.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Add a user-defined name to the self-contained synchronization objects in
order to make system diagnostics, tracing and debugging more user
friendly.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
RTEMS defined SEM_VALUE_MAX to 32767 unlike other systems like FreeBSD
and glibc. A common value is INT_MAX.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
In order to enable proper detection of thread-local storage availability
we have to provide some symbols on ARM.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Turn pthread_spinlock_t into a self-contained object. On uni-processor
configurations, interrupts are disabled in the lock/trylock operations
and the previous interrupt status is restored in the corresponding
unlock operations. On SMP configurations, a ticket lock is a acquired
and released in addition.
See also:
https://devel.rtems.org/ticket/2674
This implementation is simple and efficient. However, this test case of
the Linux Test Project would fail due to call of printf() and sleep()
during spin lock ownership:
https://github.com/linux-test-project/ltp/blob/master/testcases/open_posix_testsuite/conformance/interfaces/pthread_spin_lock/1-2.c
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
This makes it possible provide operating system specific types for
<pthread.h>. It is in line with the FreeBSD header file structure and
allows a future cleanup of <pthread.h> to not expose unrelated things
via <sys/types.h> and <unistd.h>. Glibc uses the similar
<bits/pthreadtypes.h> for this purpose.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Add _TICKET_LOCK_INITIALIZER to statically initialize a
_Ticket_lock_Control structure. This makes it possible to embed a
ticket lock in other structures outside of <sys/lock.h>.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
The FreeBSD kernel types are not used in Newlib. Provide them via an
external header file to decouple Newlib and FreeBSD updates for RTEMS.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
This file was copied verbatim from FreeBSD and is in sync
with the FreeBSD svn version used by rtems-libbsd.
Signed-off-by: Joel Sherrill <joelemail@rtems.org>
Add _Thread_queue_Queue::_owner which will be used for the upcomming
priority inheritance implementation and an O(m) independence-preserving
protocol (OMIP) implementation.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Move _Thread_queue_Queue::_Lock to begin of the structure. On RTEMS,
the presence of a lock component in the thread queue structures actually
depends on the build-time RTEMS_SMP configuration option. A move of
this part to the begin of the structure allows an implementation re-use
for the other parts.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Sebastian Huber
tuexen
jtl
rrs
sbruno
mmacy
brooks
jeff
kib
pkelsey
ae@FreeBSD.org
pfg
glebius
sephe
des
delphij
imp
ed@FreeBSD.org
jhb
Jeff Johnston
Joel Sherrill
Yaakov Selkowitz
Gedare Bloom