Rename "res" to "wait_state" and change its type to
select_stuff::wait_states. Use select_stuff::wait_states
values instead of ints throughout. Rearrange a few comments.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
* select.cc (copyfd_set): Remove.
(select): Don't copy local wait fd arrays over to returned fd arrays
since bits set there are not accounted for in return value. Zero out
returned fd arrays instead. Always call sel.poll even in case of a
timeout. Always zero out fd array when timing out. Convert while/do
to do/while for clarity. Use dedicated variable as return value to
decouple return value from artificial return code from sel.wait.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
* cygtls.h (_cygtls::wait_signal_arrived): Renamed from
set_signal_arrived.
(_cygtls::set_signal_arrived): New function signalling signal_arrived.
(_cygtls::reset_signal_arrived): Don't reset will_wait_for_signal.
(_cygtls::unwait_signal_arrived): New function only resetting
will_wait_for_signal.
(class wait_signal_arrived): Rename from set_signal_arrived.
Accommodate name change throughout Cygwin.
(wait_signal_arrived::~wait_signal_arrived): Call
_cygtls::unwait_signal_arrived. Add comment.
* cygserver_ipc.h (ipc_set_proc_info): Fetch signal_arrived handle
via call to _cygtls::get_signal_arrived.
* exceptions.cc (_cygtls::interrupt_setup): Signal signal_arrived via
call to _cygtls::set_signal_arrived.
(_cygtls::handle_SIGCONT): Ditto.
* fhandler_socket.cc (fhandler_socket::wait_for_events): Generate
WSAEVENT array prior to entering wait loop. Add cancel event object
if available. Remove calls to pthread_testcancel and just call
pthread::static_cancel_self if the cancel event object is signalled.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
* fhandler.h (class fhandler_base): Add virtual function
get_io_handle_cyg() to get handle from which OPOST-processed output is
read on PTY master.
(class fhandler_pty_slave): Add variable output_handle_cyg to store a
handle to which OPOST-processed output is written. Add two functions,
i.e., set_output_handle_cyg() and get_output_handle_cyg(), regarding
variable output_handle_cyg. Now, output_handle is used only by native
windows program. The data before OPOST-processing is written to
output_handle and OPOST-processing is applied in the master-side. For a
cygwin process, OPOST-processing is applied in the slave-side, and the
data after OPOST-processing is written to output_handle_cyg.
(class fhandler_pty_master): Add two variables, i.e., io_handle_cyg and
to_master_cyg, to store handles of a pipe through which OPOST-processed
output passes. Add pty_master_fwd_thread and function
pty_master_fwd_thread() for a thread which applies OPOST-processing
and forwards data from io_handle to to_master_cyg. Add function
get_io_handle_cyg() regarding variable io_handle_cyg. Now, the pipe
between io_handle and to_master are used only by native windows program
for applying OPOST-processing in the master-side. For a cygwin process,
the pipe between io_handle_cyg and to_master_cyg is used for passing
through the data which is applied OPOST-processing in the slave-side.
* fhandler_tty.cc (struct pipe_reply): Add member to_master_cyg.
(fhandler_pty_master::process_slave_output): Read slave output from
io_handle_cyg rather than io_handle.
(fhandler_pty_slave::fhandler_pty_salve): Initialize output_handle_cyg.
(fhandler_pty_slave::open): Set output_handle_cyg by duplicating handle
to_master_cyg on PTY master.
(fhandler_pty_slave::close): Close handle output_handle_cyg.
(fhandler_pty_slave::write): Write data to output_handle_cyg rather
than output_handle.
(fhandler_pty_slave::fch_close_handles): Close handle output_handle_cyg.
(fhandler_pty_master::fhandler_pty_master): Initialize io_handle_cyg,
to_master_cyg and master_fwd_thread.
(fhandler_pty_master::cleanup): Clean up to_master_cyg as well.
(fhandler_pty_master::close): Print to_master_cyg as well in debug
message. Terminate master forwarding thread. Close handles
to_master_cyg and io_handle_cyg.
(fhandler_pty_master::ioctl): Use io_handle_cyg rather than to_master.
(fhandler_pty_master::pty_master_thread): Add code for duplicating
handle to_master_cyg.
(fhandler_pty_master::pty_master_fwd_thread): New function for a thread
to forward OPOST-processed data from io_handle to to_master_cyg. This
thread applies OPOST-processing to the output of native windows program.
(::pty_master_fwd_thread): Ditto.
(fhandler_pty_master::setup): Create a new pipe to pass thruegh OPOST-
processed output. Create new thread to forward data from io_handle to
to_master_cyg. Set handle to_master_cyg to tty. Print io_handle_cyg as
well in debug message. Close handles io_handle_cyg and to_master_cyg in
case of error.
(fhandler_pty_master::fixup_after_fork): Set handle to_master_cyg to
tty. Copy handle to_master_cyg from arch->to_master_cyg.
(fhandler_pty_master::fixup_after_exec): Clean up to_master_cyg.
* select.cc: Check handle returned by get_io_handle_cyg() rather than
get_handle().
* tty.h (class tty): Add variable _to_master_cyg to store a handle to
which OPOST-processed data is written. Add two functions,
to_master_cyg() and set_to_master_cyg(), regarding _to_master_cyg.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
* tty.h (class tty_min): Remove variable "write_error" to which any
errors are not currently set at anywhere.
(class tty): Add variable "column" for handling ONOCR.
* tty.cc (tty::init): Add initialization code for variable "column".
* fhandler.h (class fhandler_pty_master): Remove variable "need_nl"
which is not necessary any more. "need_nl" was needed by OPOST process
in fhandler_pty_master::process_slave_output().
(class fhandler_pty_common): Add function process_opost_output() for
handling post processing for OPOST in write process.
* fhandler_tty.cc (fhandler_pty_master::process_slave_output): Count
TIOCPKT control byte into length to be read in TIOCPKT mode. Move
post processing for OPOST to write process. Remove code related to
variable "write_error". Return with EIO error if slave is already
closed.
(fhandler_pty_master::fhandler_pty_master): Remove initialization
code for variable "need_nl".
(fhandler_pty_common::process_opost_output): Add this function for
handling of OPOST in write process. Add code to avoid blocking in
non-blocking mode when output is suspended by ^S.
(fhandler_pty_slave::write): Call fhandler_pty_common::
process_opost_output() instead of WriteFile(). Remove code related to
variable "write_error".
(fhandler_pty_master::doecho): Call fhandler_pty_common::
process_opost_output() instead of WriteFile().
* select.cc (peek_pipe): Remove code related to variable "need_nl".
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
(class fhandler_pty_master): Add echo_r and echo_w handles constituting
read and write side of new echo pipe.
* select.cc (peek_pipe): On pty masters, check additionally if input
from the echo pipe is available.
* fhandler_tty.cc (fhandler_pty_master::doecho): Drop output_mutex
locking. Write output to echo pipe.
(fhandler_pty_master::process_slave_output): Check if input is available
in echo pipe and prefer to read from it, if so.
(fhandler_pty_slave::write): Drop output_mutex locking.
(fhandler_pty_master::fhandler_pty_master): Initialize echo pipe
handles to NULL.
(fhandler_pty_master::close): Close and NULL echo pipe handles.
(fhandler_pty_master::setup): Create echo pipe, close in case of error.
connect_state and af_local_connect connect call here, once, independent
of FD_CONNECT being requested. Add comment to explain why.
(fhandler_socket::connect): Drop connect_state handling and calling
af_local_connect. Move remaining AF_LOCAL stuff prior to calling
::connect and explain why. Simplify error case.
* poll.cc (poll): Handle connect state independently of POLLOUT being
requested for the descriptor to allow setting POLLIN if connect failed.
Add comment.
* select.cc (set_bits): Drop connect_state and AF_LOCAL handling here.
handler.
* cygtls.cc (_cygtls::remove): Accommodate the fact that pathbufs
has been moved from _local_storage to _cygtls.
* cygtls.h (class tls_pathbuf): Add comment to hint to gendef usage
of counters. Change type of counters to uint32_t for clarity.
Remove _cygtls as friend class.
(struct _local_storage): Move pathbufs from here...
(struct _cygtls): ...to here, allowing to access it from _sigbe.
(class san): Only define on 32 bit. Remove errno, _c_cnt and _w_cnt
members.
(san::setup): Drop parameter. Don't initialize removed members.
(san::leave): Don't set removed members.
(class myfault): Only define on 32 bit.
(myfault::faulted): Only keep implementation not taking any parameter.
Drop argument in call to sebastian.setup.
(__try/__leave/__except/__endtry): Implement to support real SEH. For
now stick to SJLJ on 32 bit.
* dcrt0.cc (dll_crt0_0): Drop 64 bit call to
exception::install_myfault_handler.
* exception.h (exception_handler): Define with EXCEPTION_DISPOSITION
as return type.
(PDISPATCHER_CONTEXT): Define as void * on 32 bit. Define as pointer
to _DISPATCHER_CONTEXT on 64 bit.
(class exception): Define separately for 32 and 64 bit.
(exception::myfault): Add handler for myfault SEH handling on 64 bit.
(exception::exception): Fix mangled method name to account for change
in type of last parameter.
(exception::install_myfault_handler): Remove.
* exceptions.cc (exception::myfault_handle): Remove.
(exception::myfault): New SEH handler for 64 bit.
* gendef (_sigbe): Set tls_pathbuf counters to 0 explicitely when
returning to the caller.
* ntdll.h: Move a comment to a better place.
(struct _SCOPE_TABLE): Define on 64 bit.
* thread.cc (verifyable_object_isvalid): Remove gcc 4.7 workaround.
* tls_pbuf.cc (tls_pbuf): Fix to accommodate new place of pathbufs.
(tls_pathbuf::destroy): Change type of loop variables to uint32_t.
* tls_pbuf.h (class tmp_pathbuf): Change type of buffer counters to
uint32_t. Accommodate new place of pathbufs.
* tlsoffsets.h: Regenerate.
* tlsoffsets64.h: Regenerate.
included by default.
* winlean.h: Add long comment to explain why we have to define certain
symbols.
(_NORMALIZE_): Define.
(_WINNLS_): Drop definition and subsequent undef.
(_WINNETWK_): Ditto.
(_WINSVC_): Ditto.
2013-11-23 Eric Blake <eblake@redhat.com>
(dev_storage): Map /dev and /dev/windows to \Device\Null.
* devices.cc: Regenerate.
* dir.cc (opendir): Create unique id. Explain why.
* fhandler.h (fhandler_dev::get_dev): Implement inline.
(fhandler_cygdrive::close): Drop declaration.
(fhandler_cygdrive::get_dev): Implement inline.
(fhandler_windows::get_hwnd): Ditto.
(fhandler_windows::set_close_on_exec): Drop declaration.
(fhandler_windows::fixup_after_fork): Ditto.
* fhandler_dev.cc (fhandler_dev::open): Call fhandler_disk_file::open
without O_CREAT flag. Explain why. Create \Device\Null handle if
/dev/ doesn't actually exist.
(fhandler_dev::close): Drop nohandle case.
(fhandler_dev::fstatvfs): Drop nohandle check. Test for fs_got_fs
instead. Set ST_RDONLY fs flag for simulated /dev.
(fhandler_dev::opendir): If /dev doesn't exist, call open() to create
fake \Device\Null handle. Don't set nohandle. Set dir_exists
correctly.
(fhandler_dev::rewinddir): Call fhandler_disk_file::rewinddir only if
/dev is a real directory.
* fhandler_disk_file.cc (fhandler_disk_file::opendir): If called for
the cygdrive dir, call open() to create fake \Device\Null handle.
Only attach __DIR_mounts buffer to dir if not called for cygdrive dir.
Don't set nohandle.
(fhandler_cygdrive::open): Create \Device\Null handle.
(fhandler_cygdrive::close): Remove.
(fhandler_cygdrive::fstatvfs): Set ST_RDONLY fs flag.
* fhandler_windows.cc (fhandler_windows::open): Create \Device\Null
handle.
(fhandler_windows::read): Don't add io_handle to WFMO handle array.
Change subsequent test for return value accordingly. Fix test for
"message arrived".
(fhandler_windows::set_close_on_exec): Remove.
(fhandler_windows::fixup_after_fork): Remove.
* path.h (path_conv::set_path): Make sure wide_path is NULL when
setting a new path.
* select.cc (peek_windows): Use correct hWnd value, not io_handle.
(fhandler_windows::select_read): Don't use io_handle as wait object.
(fhandler_windows::select_write): Ditto.
(fhandler_windows::select_except): Ditto.
(select_info): Ditto.
(select_record::dump_select_record): Declare new debugging-only function.
(select_info): Zero all fields.
(select_pipe_info): Ditto.
(select_socket_info): Ditto.
(select_serial_info): Ditto.
(select_mailslot_info): Ditto.
* select.cc (select_record::dump_select_record): Define new debugging-only
function.
(select_stuff::test_and_set): Call dump_select_record when debugging.
* thread.cc (pthread_mutex::unlock): Revert setting of tid to NULL since, in
this context, it is a number, not a pointer.
(pthread_spinlock::unlock): Ditto.
2012-11-12 Christopher Faylor <me.cygwin2012@cgf.cx>
* Makefile.common: Revamp for new configury. Add default compilation
targets, include .E processing. Add magic for allowing "CFLAGS" to
control optimization options in "CXXFLAGS".
* configure.cygwin: New include for Cygwin configure.in's.
* acinclude.m4: Delete old definitions. Implement AC_WINDOWS_HEADERS,
AC_WINDOWS_LIBS, AC_CYGWIN_INCLUDES, target_builddir, winsup_srcdir.
* aclocal.m4: Regenerate.
* autogen.sh: New file.
* ccwrap: New script.
* c++wrap: New script.
* config.guess: New script.
* config.sub: New script.
* configure: Regenerate.
* configure.in: Eliminate LIB_AC_PROG_* calls in favor of standard.
Delete ancient target test.
* install-sh: New script.
cygserver/ChangeLog:
2012-11-12 Christopher Faylor <me.cygwin2012@cgf.cx>
* Makefile.in: Revamp for new configury.
* configure.in: Revamp for new configury.
* aclocal.m4: Regenerate.
* configure: Ditto.
* autogen.sh: New script.
cygwin/ChangeLog:
2012-11-22 Christopher Faylor <me.cygwin2012@cgf.cx>
* select.cc (select): Don't return -1 when we've timed out after
looping.
2012-11-22 Christopher Faylor <me.cygwin2012@cgf.cx>
* Makefile.in: Revamp for new configury.
(datarootdir): Add variable setting.
(winver_stamp): Accommodate changes to mkvers.sh setting.
(libc.a): Fix race when libm.a might not have been built yet.
* configure.in: Revamp for new configury.
* aclocal.m4: Regenerate.
* configure: Ditto.
* autogen.sh: New script.
* mkvers.sh: Find include directives via CFLAGS and friends rather than
assuming that w32api lives nearby.
utils/ChangeLog:
2012-11-12 Christopher Faylor <me.cygwin2012@cgf.cx>
* aclocal.m4: Regenerate.
* configure: Ditto.
* autogen.sh: New script.
* configure.in: Revamp for new configury.
* Makefile.in: Revamp for new configury. Rename ALL_* to just *.
Always use "VERBOSE" setting.
(MINGW_CXX): Don't include CFLAGS in definition.
(all): Define target first, before everything else so that it is the
default.
(ps.exe): Don't add useless -lcygwin.
(ldh.exe): For consistency, add to existing MINGW_LDFLAGS rather than
redefining them.
(cygcheck.exe): Always include -lz for MINGW_LDFLAGS. Don't try to
figure out where to find it.
(dumper.exe): Simplify check. Assume libraries are installed rather
than trying to retrieve from source tree.
(install): Just use /bin/mkdir to create directories.
(Makefile): Regenerate when standard dependencies change.
* dump_setup.cc: Always include zlib.h. Remove accommodations for it
possibly not existing.
* parse_pe.cc: Add define which allows building with installed
binutils package.
* dumper.cc: Ditto.
* cygserver_ipc.h (ipc_set_proc_info): Use _cygtls::ipc_set_proc_info to set
per-thread signal arrived value.
* cygthread.cc (cygthread::detach): Use per-thread signal_arrived via
set_thread_waiting.
* fork.cc (_cygtls::fixup_after_fork): Clear signal_arrived.
(_cygtls::remove): Close any signal_arrived handle when thread exists.
(_cygtls::find_tls): Remove unneeded function.
* cygtls.h: Update copyright.
(class _cygtls): Reorganize to help avoid rebuilding newlib when structure
changes.
(_cygtls::event): Delete.
(_cygtls::threadkill): Ditto.
(_cygtls::signal_waiting): Declare new bool.
(_cygtls::find_tls): Delete declaration.
(_cygtls::set_threadkill): Ditto.
(_cygtls::reset_threadkill): Ditto.
(_cygtls::set_signal_arrived): Declare new function.
(class set_thread_waiting): Declare new class.
* cygwait.cc (cw_nowait_storage): Define.
(cygwait): Set per-thread signal_arrived via set_thread_waiting. Don't
special-case _main_tls.
* cygwait.h (cw_nowait): Define.
(cw_infinite): Ditto.
(cygwait): Redefine pathological wait-only case.
* dcrt0.cc (dll_crt0_0): Remove call to now-defunct events_init().
(dll_crt0_1): Remove call to now-defunct create_signal_arrived().
* exceptions.cc: Reflect set_signal_mask() argument reordering throughout.
Remove signal mask synchronization throughout.
(events_init): Delete definition.
(mask_sync): Delete now-unneeded mask synchronization.
(set_signal_mask): Reverse order of arguments to "standard" to, from layout.
Rename "newmask" argument to "setmask". Remove debugging.
(sig_handle_tty_stop): Use cancelable_wait rather than WFMO.
(_cygtls::interrupt_setup): Don't treat "threadkill" events specially.
Conditionally set signal_arrived depending on whether the thread has created it
or not.
(sigpacket::process): Reorganize to reflect thread-specific sending of signals
which is more in line with the way it was actually supposed to work.
* fhandler_socket.cc (get_inet_addr): Use cancelable_wait rather than
IsEventSignalled to avoid potential race.
(fhandler_socket::wait_for_events): Set signal_arrived event using
set_thread_waiting().
(fhandler_socket::close): Use cygwait for the case of just waiting 10 ms for a
signal.
* fhandler_tape.cc (fhandler_dev_tape::_lock): Use cancelable_wait rather than
WFMO. Redo switch/case tests accordingly.
* fhandler_termios.cc (fhandler_termios::bg_check): Use cygwait for case of
just waiting 0 ms for a potential signal.
* fhandler_tty.cc (fhandler_pty_master::process_slave_output): Use
cancelable_wait rather than WFSO.
* fhandler_windows.cc (fhandler_windows::read): Set per-thread signal_arrived
via set_thread_waiting().
* flock.cc (lf_setlock): Ditto.
* select.cc (pselect): Ditto. Set per-thread signal_arrived using
set_thread_waiting().
* gendef: Don't special case handling of _cygtls::sig for threads.
* gentls_offsets: Use #pragma once in tlsoffsets.h.
* ntdll.h: Use #pragma once.
* poll.cc: Reflect set_signal_mask() argument reordering.
* posix_ipc.cc (ipc_mutex_lock): Use cancelable_wait rather than WFMO.
(ipc_cond_timedwait): Set perl-thread signal arrived using
set_thread_waiting().
* security.h: Use #pragma once.
* signal.cc (abort): Reflect set_signal_mask() argument reordering.
(clock_nanosleep): Ditto. Change call to cancelable_wait to properly specify
handling of cancel and interrupt.
(sigwaitinfo): Remove handling of per-thread event in favor of per-thread
signal_arrived. Use cancelable_wait rather than WFSO.
* sigproc.cc (signal_arrived): Delete definition.
(create_signal_arrived): Ditto.
* sigproc.h (signal_arrived): Delete declaration.
(set_signal_mask): Avoid defining as a "C" function. Don't conditionally
declare.
(create_signal_arrived): Delete declaration.
* syscalls.cc (rename): Use cygwait() rather than WFSO.
* thread.h (fast_mutex::lock): Use cw_infinite rather than LARGE_NULL.
* wait.cc (wait4): Ditto.
* thread.cc (pthread_mutex::lock): Ditto.
(pthread::join): Ditto.
(semaphore::_wait): Ditto.
(pthread_kill): Remove set_threadkill() accommodation.
* tlsoffsets.h: Regenerate.
as much as possible:
* dtable.cc: Drop including sys/socket.h.
* fhandler_procnet.cc: Change includes accordingly.
* fhandler_socket.cc: Ditto.
(fhandler_socket::listen): Avoid gcc error message initializing sin6.
(LPFN_WSARECVMSG): Only define when building against w32api headers.
* net.cc: Change includes accordingly. Define USE_SYS_TYPES_FD_SET
and __WSA_ERR_MACROS_DEFINED. Define _INC_NETIOAPI temporarily and
explain why.
(struct _IP_ADAPTER_UNICAST_ADDRESS_LH): Only define when building
against w32api headers.
(struct _IP_ADAPTER_ADDRESSES_LH): Ditto.
(SIO_GET_INTERFACE_LIST): Ditto.
(ws_freeaddrinfo): Rename from freeaddrinfo so as not to collide with
Winsock declaration. Change througout.
(ws_getaddrinfo): Ditto.
(ws_getnameinfo): Ditto.
* select.cc: Include netdb.h after defining USE_SYS_TYPES_FD_SET.
* syslog.cc: Drop including netinet/in.h. Define USE_SYS_TYPES_FD_SET
and include ws2tcpip.h.
* include/netdb.h (struct addrinfo): Don't define when building Cygwin.
* include/cygwin/if.h: Don't declare if_xxx functions when building
Cygwin.
* include/cygwin/in.h: Disable most definitions when building Cygwin.
* include/cygwin/socket.h: Disable sockaddr and sockaddr_storage
definitions when building Cygwin. Same for MCAST_INCLUDE/MCAST_EXCLUDE.
* libc/inet_addr.c: Don't define __INSIDE_CYGWIN__ nor
__INSIDE_CYGWIN_NET__.
* libc/inet_network.c: Ditto.
* libc/minires.h: Drop redundant inclusion of netdb.h. Define
__INSIDE_CYGWIN_NET__ only before including netdb.h and resolver
headers.
* select.cc (allocfd_set): Try to make a little more efficient.
(cygwin_select): Break into two functions to avoid what seems to be a strange
compiler problem with alloca and sel constructor.
(select): New function. Always honor return from call_signal_handler.
(select_stuff::wait): Always honor return from call_signal_handler.
* select.h (select_stuff::select_stuff): Use NULL to initialize pointers rather
than 0.
* select.cc (set_handle_or_return_if_not_open): Remove unneeded final backslash
from definition.
(cygwin_select): Reorganize to incorporate outer retry loop. Move remaining
time recalculation here for retry case. Use select_stuff::wait_states for loop
control.
(select_stuff::cleanup): Avoid unneeded initialization.
(select_stuff::wait): Modify definition to return select_stuff::wait_states.
Eliminate is_cancelable. Don't element 1 of an array if it is a cancel handle.
Remove loop. Rely on being called from enclosing loop in cygwin_select.
Remove time recalculation when restarting. Try harder to always return from
the bottom.
* select.h (select_stuff::wait_state): New enum.
(select_stuff::wait): Modify declaration to return select_stuff::wait_states.
GetOverlappedResult since previous IsEventSignalled will have reset the handle.
* select.cc (cygwin_select): Remove space before parentheses in syscall
debugging output.
(pipe_data_available): Streamline if block.
reference count changes itself.
* fhandler.cc (fhandler_base::reset): Set _refcnt to 0.
* fhandler.h (fhandler_base::refcnt): Report refcnt when debugging.
* select.cc (cygwin_select): Set return_on_signal to indicate when select
should be interrupted.
(select_stuff::wait): Keep looping unless return_on_signal is set.
* select.h (select_stuff::return_on_signal): New variable.
(select_stuff::select_stuff): Zero return_on_signal.
information.
* exceptions.cc (_cygtls::inside_kernel): Modernize comment. Consider
executing a DLL from the Wow64 directory as being "in the kernel".
(_cygtls::call_signal_handler): For now, only deal with main_tls signals if
main_tls is known to be executing in the cygwin DLL. To more closely emulate
linux, consider the operation to be restartable if not executing in the main
thread.
* globals.cc (windows_system_directory): Remove NO_COPY.
(windows_system_directory_length): Ditto.
(system_wow64_directory): New variable.
(system_wow64_directory_length): Ditto.
* select.cc (cygwin_select): Don't issue a EINTR on non-main threads since that
seems to be what Linux does. Add missing break to signal case/switch.
(select_stuff::wait): Don't issue a EINTR on non-main threads since that seems
to be what Linux does. Remove now-unneeded accommodation for
WAIT_IO_COMPLETION. Add a comment.
* sigproc.h (cygwait): Ditto. Don't return if signal_received noticed and it's
not the main thread.
* signal.cc (sigprocmask): Add standard syscall debug stuff.
* thread.cc (pthread_sigmask): Ditto.
(peek_windows): Report on HWND handle used in queries.
* select.h: Update copyright.
* sigproc.h (cygwait): Eliminate multi-argument variety since more general
implementation may cause odd problems in select. Also force to always be
inline.
for stuff".
* fhandler.cc (fhandler_base_overlapped::wait_overlapped): Use simplified arg
form of cygwait.
* fhandler_console.cc (fhandler_console::read): Ditto.
* fhandler_audio.cc (fhandler_dev_dsp::Audio_out::waitforspac): Ditto.
(fhandler_dev_dsp::Audio_in::waitfordata): Ditto.
* fhandler_fifo.cc (fhandler_fifo::wait): Ditto.
* fhandler_serial.cc (fhandler_serial::raw_read): Ditto.
(fhandler_serial::raw_write): Ditto.
* select.cc (cygwin_select): Ditto.
* sigproc.h (cygwait): Rename from cygWFMO. Define two argument and single
argument forms of this function.
* fhandler_tty.cc (fhandler_pty_slave::open): Use method to query if tty is
open.
(fhandler_pty_slave::read): Send SIGHUP when master is detected as closed.
(fhandler_pty_common::close): Close input_available_event in callers since
master may need to signal it first.
(fhandler_pty_master::close): Lie and set input_available_event when closing,
then close input_available_event.
(fhandler_pty_slave::close): Close input_available_event explicitly here.
* tty.h (tty::is_master_closed): Declare new method.
Throughout, change syscalls to report on return values using new %R format
option.
* smallprint.cc (__small_vsprintf): Add parsing for %R to report on return
values and possible errno from syscalls.
* errno.cc (errmap): Add PRIVILEGE_NOT_HELD.
* fhandler_tty.cc (fhandler_pty_master::setup): When creating a thread use
shorter name to reduce debuggging output.
* select.cc (start_thread_pipe): Ditto.
(start_thread_serial): Ditto.
(start_thread_socket): Ditto.
(start_thread_mailslot): Ditto.
* sigproc.cc (talktome): Ditto.
process of setting up the DLL and no name is known.
* dcrt0.cc (initial_env): Remove CYGWIN_SLEEP stuff.
(get_cygwin_startup_info): Activate strace here as appropriate.
(dll_crt0_0): Move get_cygwin_startup_info as early as possible to avoid
missing strace output.
* fork.cc (frok::child): Move debugging statement to point where ppid will be
set.
* pinfo.cc (pinfo::thisproc): Remove obsolete call to strace.hello. Tweak
debug output slightly.
* select.cc (select_stuff::wait): Allow APCS to be triggered while waiting
since we use them now. Report when that happens.
* sigproc.cc (child_info::child_info): Use strace.active() rather than
strace.attached().
* spawn.cc (child_info_spawn::worker): Only write strace child pid when we know
it's a cygwin process. Accommodate change to write_child argument list.
* strace.cc (strace::hello): Delete. Move functionality...
(strace::activate): ...to here.
(mypid): Just use raw GetCurrentProcessId () if myself isn't set.
(strace::write_childpid): Don't wait for subproc_ready. Remove arg which was
required for it.
* include/sys/strace.h (strace::hello): Delete.
(strace::write_childpid): Delete first argument.
* devices.cc: Regenerate.
* dtable.cc: (fh_alloc): Preserve /dev/tty name when that's what we opened.
(build_fh_pc): Preserve any existing name.
* fhandler.cc (fhandler_base::open_with_arch): Ditto.
* fhandler_tty.cc (fhandler_pty_master::fhandler_pty_master): Force the name to
/dev/ptmx while preserving other pty master device information.
* path.h (cfree_maybe): New macro.
(path_conv::operator =): Free any allocated strings in target.
(path_conv::free_strings): Delete unused function.
* sigproc.cc (proc_terminate): Remove previous accommodation for execed
processes since it didn't have the desired effect. Change comment to a FIXME.
* spawn.cc (chExeced): Mark NO_COPY.
(exe_suffixes): Ditto.
* fhandler_socket.cc (fhandler_socket::sendmsg): Add missing call to
get_inet_addr to convert AF_LOCAL to AF_INET sockets.
* net.cc (cygwin_socket): Workaround UDP Winsock problem. Add comment
to explain why.
* select.cc: Include winsock2.h rather than winsock.h.
(select_stuff::destroy): New inline method to delete memory taken
by select_stuff.
(select_stuff::~select_stuff): Call destroy.
(select_stuff::wait): Add case to allow canceling select.
* select.h (select_stuff::destroy): Declare.
* thread.cc: Mark poll, pselect and poll as cancelable.
* autoload.cc: Convert all definitions for ANSI user32 functions to
definitions for the corresponding UNICODE function.
(SendMessageA): Remove.
(SendNotifyMessageW): Define.
* fhandler_windows.cc (fhandler_windows::write): Use SendNotifyMessageW
call rather than SendMessage to make function always return immediately.
(fhandler_windows::read): Make function interruptible and a cancellation
point. Handle O_NONBLOCK.
* select.cc (peek_serial): Don't wait for signal_arrived here.
* window.cc (wininfo::winthread): Call CreateWindowExW directly rather
than CreateWindow wrapper.
* fhandler_socket.cc (fhandler_socket::connect): Ditto.
(fhandler_socket::accept4): Ditto.
(fhandler_socket::recvfrom): Ditto.
(fhandler_socket::recvmsg): Ditto.
(fhandler_socket::sendto): Ditto.
(fhandler_socket::sendmsg): Ditto.
* flock.cc (lf_setlock): Allow to cancel thread running blocking
file lock. Try to make code more readable.
(lockf): Call pthread_testcancel.
* mmap.cc (msync): Ditto.
* posix_ipc.cc (ipc_cond_timedwait): Call pthread::static_cancel_self
rather than pthread_testcancel.
* select.cc (cygwin_select): Call pthread_testcancel.
* syscalls.cc (pread): Ditto.
(pwrite): Ditto.
(readv): Ditto.
(writev): Ditto.
(open): Ditto.
(close): Ditto.
(fsync): Ditto.
* termios.cc (tcdrain): Ditto.
* thread.cc: Align list of cancellation points with above changes.
Mark not-implemented functions, too.
(cancelable_wait): Don't set unused object indices to WAIT_FAILED
since that could result in wrong behaviour. Set them to the invalid
value WAIT_TIMEOUT + 1 instead.
__name.
* cygthread.h (cygthread::cygthread): Create versions which eliminate 'n'
parameter.
* dcrt0.cc (dll_crt0_1): Remove check for threadfunc_ix. Remove obsolete
comments. Set process_state to active here.
* fhandler_netdrive.cc (create_thread_and_wait): Use shortened cygthread
constructor.
* timer.cc (timer_tracker::settime): Ditto.
* window.cc (HWND): Ditto.
* fhandler_tty.cc: Use shortened cygthread constructor, where appropriate,
throughout.
* select.cc: Ditto.
* fork.cc (frok::child): Remove wait_for_sigthread.
(fork): Reformat if for slightly better clarity.
* init.cc (dll_finished_loading): New variable.
(dll_entry): Use dll_finished_loading to determine when we should call
merge_threadfunc.
* sigproc.cc (no_signals_available): Simplify by using my_readsig.
(wait_sig_inited): Delete.
(wait_sig): Define as void function.
(pending_signals): Accommodate change to wait_sig definition.
(wait_for_sigthread): Delete definition.
(sigproc_init): Initialize signal pipe here, before wait_sig thread is created.
Use void form of cygthread creation.
(init_sig_pipe): Delete.
(wait_sig): Return void rather than DWORD. Assume previous initialization of
signal pipe. Set my_sendsig to NULL when exiting.
* sigproc.h (wait_for_sigthread): Delete declaration.
(MsgWaitForMultipleObjects): Remove.
* select.cc (select_stuff::wait): Use MsgWaitForMultipleObjectsEx with
QS_ALLPOSTMESSAGE and, if possible, MWMO_INPUTAVAILABLE flags. Explain
why. Fix a potential crash due to a NULL pointer in WAIT_FAILED case.
(peek_windows): Use filter pattern on NT4. Explain why.
* wincap.h (wincaps::has_mwmo_inputavailable): New element.
* wincap.cc: Implement above element throughout.
* select.cc (peek_pipe): Reorganize slightly. Don't attempt to check a handle
if it has ongoing I/O.
(select_pipe_info::select_pipe_info): Delete definition.
(select_pipe_info::~select_pipe_info): Delete definition.
(thread_pipe): Get rid of WFMO call. Reorganize loop.
(pipe_cleanup): Remove dependence on destructor.
(thread_serial): Reorganize loop.
* select.h (select_pipe_info): Empty this class since it no longer has any
special requirements (for now).
* syscalls.cc (readv): Remove an unneeded debug printf.
a friend until the fhandler_tty intertangling can be worked out.
* select.cc (select_pipe_info::add_watch_handle): Don't inspect the overlapped
event if we're not waiting for I/O.
(fhandler_tty_common::select_*): Change to standard function. Don't do kludgy
fhandler_pipe coercion.
events (for completion of mouse reporting mode 1000) and mouse
movement events (for additional mouse reporting modes 1002 and 1003).
Use mouse_aware() as a guard and only condition for mouse
reporting in order to enforce consistence of read() and select().
Add focus reports (for additional focus reporting mode 1004).
(mouse_aware): Enable detection of additional mouse events for select().
Tune function to precisely match actual reporting criteria.
Move adjustment of mouse position (by window scroll offset)
here to avoid duplicate code.
(char_command): Initialization of enhanced mouse reporting modes.
Initialization of focus reporting mode.
* fhandler.h (use_mouse): Change flag (bool->int) to indicate
additional mouse modes. Add flag to indicate focus reporting.
(mouse_aware): Move enhanced function into fhandler_console.cc.
* select.cc (peek_console): Use modified mouse_aware() for more
general detection of mouse events. Also check for focus reports.
memory used by socket select functions. Combine them into a single
struct select.
* cygtls.cc: Accommodate above change throughout.
(_cygtls::init_thread): Drop initalizing of sockevt to
INVALID_HANDLE_VALUE.
(_cygtls::fixup_after_fork): Reset sockevt to NULL.
(_cygtls::remove): Don't use sockevt value to bail out prematurely.
Set sockevt to NULL. Free malloced select members.
* select.h (struct select_socket_info): Drop max_w4 member.
* select.cc (thread_socket): Use INFINITE timeout value if number of
objects to wait for is <= MAXIMUM_WAIT_OBJECTS. Use num_w4 member
of select_socket_info struct rather than dropped max_w4.
(init_tls_select_info): New inline function to initialize TLS select
members.
(start_thread_socket): Just call init_tls_select_info to initialize TLS
select members and use them later on.
(socket_cleanup): Don't free select_socket_info pointer members since
they are thread local now.
(select_record::select_record): Define do-nothing constructor for "new" to
avoid gratuitous zeroing.
(select_info): New base class.
(select_pipe_info): New class with methods for dealing with pipes.
(select_socket_info): New class with methods for dealing with sockets.
(select_serial_info): Dummy class for serial.
(select_mailslot_info): Dummy class for mailslots.
(select_stuff): Define device_specific_* as actual classes rather than void *.
* dtable.h (dtable::select_read): Accommodate return value change to 'bool' and
argument change to "select_stuff".
(dtable::select_write): Ditto.
(dtable::select_except): Ditto.
* dtable.cc (dtable::select_read): Accommodate return value change to 'bool'
and argument change to "select_stuff".
(dtable::select_write): Ditto.
(dtable::select_except): Ditto.
* fhandler.h: Excise select-related classes.
(fhandler_*::select_read): Change argument to select_stuff.
(fhandler_*::select_write): Ditto.
(fhandler_*::select_except): Ditto.
* select.cc (UNIX_FD_ZERO): Use memset rather than bzero.
(select_stuff::test_and_set): Change return type to bool. Allocate
select_record on entry and let fhandler_*::select_* operate on the start.next
field of select_stuff.
(pipeinf): Delete.
(select_pipe_info::select_pipe_info): New constructor. Allocates event for
controlling pipe waits.
(select_pipe_info::~select_pipe_info): New destructor. Destroy event. Stop
thread.
(select_pipe_info::add_watch_handle): New function.
(thread_pipe): Wait for the hEvent part of any overlapped pipes before peeking.
(start_thread_pipe): Don't allocate device_specific_pipe stuff here. Assume
that it has been allocated earlier.
(pipe_cleanup): Rely on select_pipe_info destructor to clean up pipe
paraphenalia.
(fhandler_*::select_*): Derive select_record from new select_stuff argument.
(fhandler_pipe::select_*): Ditto. Allocate pipe-specific field if not already
allocated.
(serialinf): Delete.
(thread_serial): serialinf -> select_serial_info.
(fhandler_base::ready_for_read): Rewrite to accommodate change in argument to
fhandler_*::select_*.
(socketinf): Delete.
(thread_socket): socketinf -> select_socket_info.
(mailslotinf): Delete.
(thread_mailslot): mailslotinf -> select_mailslot_info.
whether the overlapped event should be tested.
(fhandler_base::read_overlapped): Pass is_overlapped state to has_ongoing_io.
(fhandler_base::write_overlapped): Ditto.
* fhandler.h (fhandler_base::has_ongoing_io): Accommodate argument change.
* select.cc (peek_pipe): Ditto.
* fhandler.cc (fhandler_base::has_ongoing_io): Define new function.
(fhandler_base::read_overlapped): Use has_ongoing_io to avoid writing when
handle has not completed last I/O.
(fhandler_base::write_overlapped): Ditto.
* select.cc (peek_pipe): Be more careful about accessing hEvent field from
get_overlapped().
from complaining about the very thing we're trying to test.
* ntea.cc (read_ea): Reorganize to avoid a new compiler warning/error.
* sched.cc (sched_rr_get_interval): Ditto.
* select.cc (peek_serial): Ditto.
* libc/rexec.cc (ruserpass): Ditto.
* posix_ipc.cc (ipc_names): Make static to avoid a compiler warning
(and it's the right thing to do anyway).
* dtable.cc (handle_to_fn): Ditto.
* fhandler_console.cc (fhandler_console::read): Ditto.
(fhandler_console::scroll_screen): Ditto.
(dev_console::set_color): Ditto.
* fhandler_dsp.cc (fhandler_dev_dsp::write): Ditto.
(fhandler_dev_dsp::read): Ditto.
* fhandler_tape.cc (mtinfo_drive::get_status): Ditto.
* hookapi.cc (find_first_notloaded_dll): Ditto.
* mmap.cc (msync): Ditto.
* pipe.cc (pipesync::pipesync): Ditto.
* sec_acl.cc (getace): Ditto.
* sec_auth.cc (create_token): Ditto.
(lsaauth): Ditto.
* select.cc (peek_pipe): Ditto.
* spawn.cc (av::fixup): Ditto.
* syscalls.cc (popen): Ditto.
* tty.cc (tty::init_session): Ditto.
* uinfo.cc (pwdgrp::load): Ditto.
* fhandler.cc (fhandler_base::setup_overlapped): Ditto.
(fhandler_base::wait_overlapped): Rename second use of res variable to wres or
errors are not returned correctly.
* dcrt0.cc: Remove obsolete variable.
* dll_init.cc (release_upto): Fix typo involving incorrect use of '|'.
* fhandler_disk_file.cc (fhandler_base::fstat_by_handle): Avoid a compiler
warning regarding coercing type-punned variables.
(fhandler_base::fstat_by_name): Ditto. fhandler_fifo.cc
(fhandler_fifo::open_nonserver): Fix = vs. == typo.
(fhandler_fifo::wait): Add all conditions to switch statement to avoid a
compiler warning.
* fhandler_process.cc: Avoid unneeded initialization of variables to zero.
(fhandler_socket::listen): Add braces around initializer.
* flock.cc (inode_t::get_all_locks_list): Reorganize to avoid a compiler
warning. Fix problem with EWOULDBLOCK error return.
* path.cc (GUID_shortcut): Use braces around struct initializer.
(cygwin_conv_path): Reorganize to avoid a compiler warning.
* random.cc (dummy): Mark variable as volatile to avoid a "used uninitialized"
warning.
* libc/getopt.c: Mark some variables as dllexport although gcc doesn't seem to
do the right thing with them.
* libc/minires-os-if.c (get_registry_dns_items): Coerce some function arguments
to avoid a compiler warning.
Thomas Wolff
John Hood
Corinna Vinschen
Takashi Yano
Christopher Faylor