This is used in a bunch of places, but nowhere is it ever set, and
nowhere can I find any documentation, nor can I find any other project
using it. So delete the flags to simplify.
These targets don't actually cross-compile -- they try to pull some
objects out of the host's /lib/libc.a, /lib/libm.a, and /lib/crt0.o
directly and merge them into newlib's own libraries. This is hard
to keep working and impossible to test. Considering the vintage of
such targets, and gcc dropping them many many years ago, drop them
from newlib too. This will make cleaning up the build a lot easier.
The machine/{configure,Makefile} files exist only to fan out to the
specific machine/$arch/ subdir. We already have all that same info
in the phoenix/ dir itself, so by moving the recursive configure and
make calls into it, we can cut off this logic entirely and save the
overhead.
These were never added to the tree, and as we transition from autoconf
to automake, it really wants the latter subdirs to always exist. These
don't, so delete the logic.
The original cut for small arguments at |x|<2**-70 (copied from the
double version) produces that when computing nadj we get a subnormal
number for t*x and thus, the division of pi/subnormal will be INF and
the logarithm of it too, which is wrong as a result for lgammaf in this
range.
The proposed new limit seems to be safe and has been tested to
produce accurate results.
(Courtesy of Andreas Jung, ESA)
- When non-cygwin app is started in console, console mode is set to
tty::native. However, if stdin is redirected, current code does not
set the input mode of the console. In this case, if the app opens
"CONIN$", the console mode will not be appropriate for non-cygwin
app. This patch fixes the issue.
Addresses:
https://github.com/GitCredentialManager/git-credential-manager/issues/576
- Currently, there is no chance to change console mode for non-cygwin
inferior of GDB. With this patch, the console mode is changed to
tty::native in CreateProcess() and ContinueDebugEvent() hooked in
fhandler_console.
- In tty_min::setpgid(), a pointer to fhandler instance is casted to
fhandler_pty_slave and accessed even if terminal is not a pty slave.
This patch fixes the issue.
- Currently, pty discards input only in from_master pipe on signal.
Due to this, if pty is started without pseudo console support and
start a non-cygwin process from cmd.exe, type adhead input is not
discarded on signals such as Ctrl-C. This patch fixes the issue.
- With this patch, the code to wait for completion of forwarding of
output from non-cygwin app is revised so that it can more reliably
detect the completion.
- If the slave process writes a lot of text output, doecho() can
cause deadlock. This is because output_mutex is held in slave::
write() and if WriteFile() is blocked due to pipe full, doecho()
tries to acquire output_mutex and gets into deadlock. With this
patch, the deadlock is prevented on the sacrifice of atomicity
of doecho().
- Previously, non-cygwin app running in pty started without pseudo
console support was suspended by Ctrl-Z rather than sending EOF.
Even worse, suspended app could not be resumed by fg command. With
this patch, Ctrl-Z (EOF for non-cygwin apps) is passed to non-cygwin
app instead of suspending that app. This patch also handles Ctrl-\
(QUIT) and Ctrl-D (EOF) as well.
- Currently, if cat is started from cmd.exe which is started in cygwin
console, Ctrl-C terminates not only cat but also cmd.exe. This also
happens in pty in which pseudo console is disabled. This patch fixes
the issue.
No functional changes here, just fix warnings the compiler noticed.
bfin/syscalls.c:156:13: warning: conflicting types for built-in function ‘memset’
bfin/syscalls.c: In function ‘_unlink’:
bfin/syscalls.c:193:3: warning: passing argument 2 of ‘do_syscall’ discards qualifiers from pointer target type
bfin/syscalls.c:33:1: note: expected ‘void *’ but argument is of type ‘const char *’
bfin/syscalls.c: In function ‘_exit’:
bfin/syscalls.c:104:1: warning: ‘noreturn’ function does return
Compiling the basiccrt .S files missed an include to the local bfin/
headers causing the build to break when installing anew.
Reported-by: Jeff Law <jeffreyalaw@gmail.com>
These look like they were just copied & pasted from common/Makefile.am.
The funcs in this dir are all stubs that don't actually call any math
or builtin functions, and a simple compile shows they produce identical
object code. So delete to simplify the build rules.
It looks like csky was created by copying & pasting the m68k port,
but m68k-specific stuff was left over related to target selection.
The makefile doesn't do anything with it, so punt it all to make
the file much simpler.
- Currently, ENABLE_INSERT_MODE and ENABLE_QUICK_EDIT_MODE are cleared
if cygwin is started in console. These flags will not be recovered
even when exiting from cygwin. Also note that if ENABLE_EXTENDED_FLAGS
is once unset, then the flag ENABLE_QUICK_EDIT_MODE it's associated
with will no longer be preserved. Unfortunately, we're accidentally
stepping on this in fhandler_console::set_input_mode().
This patch solves this by carrying forward these flags in the place
where it had been ignoring them. Since the previous behaviour of
leaving these flags unset would essentially maintain their existing
state, adding the carry-over of the flags now should not alter console
behaviour.
Correct the overflow limit in the variable o_threshold to be consistent
with the FLT_UWORD_LOG_MAX variable used by the internal implementation
of the expf algorithm itself.
The u_threshold variable has also been modified to be written in the
same format.
Note that this fix improves the situation but does not completely
correct the inconsistencies regarding the overflow and underflow limits
between the expf wrapper (wf_exp.c) and the expf algorithm itself
(ef_exp.c).
Currently these limits are different for the
_FLT_LARGEST_EXPONENT_IS_NORMAL and _FLT_NO_DENORMALS cases as well as
for the case where __OBSOLETE_MATH is not defined (only for the
underflow limit in this case).
This kills off the last configure script under libm/ and folds it
into the top newlib configure script. The vast majority of logic
was already in the top configure script, so move the little that
is left into a libm/acinclude.m4 file.
Make sure we depend on the right name of mkdoc all the time, and that
the rules that need it (e.g. .def files) depend on it.
Reported-by: Jon Turney <jon.turney@dronecode.org.uk>
This was only ever used for i?86-pc-linux-gnu targets, but that's been
broken for years, and has since been dropped. So clean this up too.
This also deletes the funky objectlist logic since it only existed for
the libtool libraries. Since it was the only thing left in the small
Makefile.shared file, we can punt that too.
This was only used by the i?86-pc-linux-gnu target which we've removed,
and even though it's using a "sys/linux/" dir to make it sound like it
only depends on the Linux kernel, it's actually tied to glibc APIs built
on top of Linux. Since the code relies on internal glibc APIs and has
been broken for some time, punt it all. If someone wants to bring it
back, they can try and actually keep the Linux-vs-glibc APIs separate.
This was added 20+ years ago. It seems to have very few (or no users)
as it only works on 32-bit x86 GNU/Linux (i.e. glibc) systems, and even
then only with old versions of glibc. It hasn't compiled in at least 5
years, but most likely been broken for more like 15 years -- it relies
on internal glibc APIs (like linuxthreads), and that code has changed
and been deleted significantly since.
This single target ends up dragging in a lot of non-trivial code that is
hard to keep working, and currently impossible to verify -- the libtool
and iconvdata and sys/linux/ code isn't used by anything else, but ends
up touching just about every build file in the tree. Punt the target so
we can start stripping out all these unique code paths.
This commit by itself just disables the target. We'll start deleting the
individual unused pieces in followups.
The top level dir isn't doing anything interesting, just recursing into
subdirs. So this change isn't terribly exciting. But it sets us up for
doing more fun stuff in follow up commits.
[TODO] Check test targets
The common $DO variable is used by the multilib logic to control which
target to multiplex. But the m68k subdir is also using $DO to control
which target (m68k or fido) to build. As we flatten things to automake,
this conflict shows up and breaks the m68k build. Just rename the m68k
variable to something unique to avoid it.
Now that we use AC_NO_EXECUTABLES, and we require a recent version of
autoconf, we don't need to define our own copies of these macros. So
switch to the standard AC_PROG_CC.
This logic was added to libc & libm to get it working again after some
reworks in the CPP handling, but now that that's settled, let's move
this to the common newlib configure logic. This will make it easier
to consolidate all the configure calls into the top-level newlib dir.
This does create a lot of noise in the generate scripts, but that's
because of the ordering of the calls, not because of correctness. We
will try to draw that back down in follow up commits as we modernize
the toolchain calls in here.
This code is a bit more convoluted than it needs to be. GPR_SOURCES
is never set to anything, and the automake checks use negative logic
to add the SP & DP source files to dedicated variables that are only
expanded once. Get rid of the unused variable, use normal boolean
logic, and collapse the source settings into a single variable.
Brian Inglis
Mike Frysinger
Andoni Arregi
Takashi Yano
Mitchell Hentges