in question == our ctty.
* syscalls.cc (setsid): Avoid two function calls.
* dtable.cc (dtable::dup_worker): Remove debugging.
* init.cc (search_for): Calculate for every new process rather than using
shared value.
(threadfunc_ix): Fill in for ever new process rather than sing shared value.
* cygheap.h (init_cygheap::manage_console_count): Ditto.
(init_cygheap::console_count): Ditto.
* fhandler.h (fhandler_console::has_a): Ditto.
(fhandler_console::free_console): Declare new function.
* fhandler_console.cc (fhandler_console::free_console): Define new function.
(fhandler_console::open_setup): Delete call to manage_console_count.
(fhandler_console::close): Ditto. Replace with call to free_console().
* fhandler_tty.cc (fhandler_pty_slave::open): Delete call to
manage_console_count.
(fhandler_pty_slave::cleanup): Ditto.
(fhandler_pty_slave::close): Call fhandler_console::free_console() if this is
our controlling tty.
* pinfo.cc (_pinfo::set_ctty): Skip function if tty in question == our ctty.
Delete call to manage_console_count.
* syscalls.cc (close_all_files): Avoid locking and avoid setting errno when
iterating over fds.
* fhandler.cc (flush_async_io): Assume only called for writer. Call
GetOverlappedResult directly rather than kluding call to has_ongoing_io.
(fhandler_base_overlapped::close): Only start flush thread when closing write
handle. Only cancel I/O when reading.
* dtable.cc (dtable::release): Make void again. Skip not_open check since it
is guaranteed to be open. Don't bother deleting here since actual deletion
will be handled in cygheap_fdget::~cygheap_fdget.
* dtable.h (dtable::release): Make void again.
* syscalls.cc (dup2): Bump fhandler use count on successful dup.
Throughout use wincap.page_size instead of getsystempagesize.
Throughout use "status" as variable name to hold NTSTATUS values.
* fhandler_mem.cc: Check for NT_SUCCESS rather than for STATUS_SUCCESS.
Fix debug_printf output. Rectify long statements. Fix comment
formatting.
* fhandler_proc.cc: Ditto.
(format_proc_swaps): Drop useless test for ERROR_PROC_NOT_FOUND.
* fhandler_process.cc: Ditto as in fhandler_mem.cc.
(get_process_state): Rearrange allocation loop. Use malloc/realloc.
(get_mem_values): Fix potential NULL pointer usage. Drop unused
variable.
* pinfo.cc (winpids::enum_processes): Handle low memory gracefully.
* sec_auth.cc (get_priv_list): Drop local variable ret.
* shared.cc (memory_init): Drop outdated call to getpagesize.
* syscalls.cc (getsystempagesize): Remove.
* sysconf.cc: Check for NT_SUCCESS rather than for STATUS_SUCCESS.
(sysinfo): Constify sizeof_stodi. Drop useless test for
ERROR_PROC_NOT_FOUND.
* thread.cc (pthread_getattr_np): Cast pointers to uintptr_t rather
than to int for pointer arithmetic.
* winsup.h (getsystempagesize): Drop declaration.
the case oldpath is no .lnk symlink and newpath points to an existing
.lnk symlink or .exe file and no explicit .lnk suffix has been given
in oldpath. Add a comment to explain.
closed().
(fhandler_base_overlapped::close): Correct comment.
(fhandler_base_overlapped::destroy_overlapped): Signal overlapped event before
closing it to potentially wake up a waiting thread.
(fhandler_base_overlapped::wait_overlapped): Expand setting of err when closed
to encompass non-signal event. Test for a cancel event before making
nonblocking decisions.
* syscalls.cc (close): Set closed flag here so that any concurrently executing
functions will be notified ASAP.
* fhandler.cc (fhandler_base::write): Ditto.
(fhandler_base_overlapped::close): Cancel any ongoing I/O before closing.
* syscalls.cc (write): Default to always reporting all writes in strace output
via syscall_printf.
* wait.cc (wait4): Fix debugging output. Use standard syscall leaver output.
* cygheap.h
(cygheap_fdmanip::release): Make virtual.
(cygheap_fdnew::~cygheap_fdnew): New destructor increments reference count when
fd has been allocated.
(cygheap_fdget::fh): New (old?) field.
(cygheap_fdget::cygheap_fdget): Increment reference count when we've found an
active fd. Set fh appropriately.
(cygheap_fdget::~cygheap_fdget): Decrement reference count when appropriate.
Delete fh if reference count goes to zero.
(cygheap_fdget::release): New function. Do more bookkeping on release.
* dtable.cc (dtable::release): Change from void to boolean return. Only delete
the fhandler when its reference count is <= 0 (this should be a fairly unusual
case). Return true if fhandler has been deleted.
(cygwin_attach_handle_to_fd): Increment reference count when fh is assigned.
(dtable::init_std_file_from_handle): Ditto.
* dtable.h (dtable::release): Change return to boolean.
* fhandler.cc (fhandler_base::fhandler_base): Set new isclosed flag to false.
Set _refcnt to zero.
(fhandler_base::close): Simplify paranoid debugging output. Set new isclosed()
flag.
(fhandler_base_overlapped::wait_overlapped): Use isclosed() flag to avoid
querying the exception handle.
* fhandler.h (fhandler_base::_refcnt): New field.
(fhandler_base::refcnt): New function.
(fhandler_base::isclosed): Implement.
(fhandler_base::fhandler_base): Set isclosed to false.
* syscalls.cc: Remove space after function before parentheses for several
strace printfs.
(dup): Add standard strace "leaver" code.
(dup2): Ditto.
(dup3): Ditto.
(remove): Ditto.
(getpid): Ditto.
(getppid): Ditto.
(lseek64): Fix strace debugging to correctly use %R.
* fhandler_termios.cc (fhandler_termios::tcsetpgrp): Avoid sending signals to
other processes if we're debugging since it can cause a deadlock with the
calling debugger.
* exceptions.cc (_cygtls::call_signal_handler): Add debugging-only strace
output.
(munlock): Ditto.
(posix_madvise): Ditto.
* signal.cc: Remove obsolete sigcatchers stuff throughout.
(sigaction_worker): Add function name parameter and use it to show standard
syscall return value debugging output. Also add fault protection.
(sigaction): Accommodate extra argument to sigaction_worker.
(siginterrupt): Ditto.
* syscalls.cc (read): Remove obsolete sigcatchers stuff.
(readv): Ditto.
Throughout, change syscalls to report on return values using new %R format
option.
* smallprint.cc (__small_vsprintf): Add parsing for %R to report on return
values and possible errno from syscalls.
* errno.cc (errmap): Add PRIVILEGE_NOT_HELD.
* fhandler_tty.cc (fhandler_pty_master::setup): When creating a thread use
shorter name to reduce debuggging output.
* select.cc (start_thread_pipe): Ditto.
(start_thread_serial): Ditto.
(start_thread_socket): Ditto.
(start_thread_mailslot): Ditto.
* sigproc.cc (talktome): Ditto.
Throughout rename _PROC_* to _CH_*.
* child_info.h: Include "pinfo.h".
(child_info_types): Rename _PROC_* -> _CH_* to avoid confusion with similarly
named constants.
(_PROC_*): Delete unneeded aliases.
(PROC_*): Ditto.
(CURR_CHILD_INFO_MAGIC): Ditto.
(cchildren): Define using "pinfo_minimal".
(child_info::set_saw_ctrl_c): Move to
(child_info_spawn::set_saw_ctrl_c): Here.
(child_info_spawn::lock): New field.
(child_info_spawn::hExeced): Ditto.
(child_info_spawn::ev): Ditto.
(child_info_spawn::~child_info_spawn): Move to sigproc.cc.
(child_info_spawn::child_info_spawn): Ditto.
(child_info_spawn::cleanup): Declare new function.
(child_info_spawn::set_saw_ctrl_c): Move to this class. Set flag only when
execed and return true when we have set the flag.
(child_info_spawn::child_info_spawn::signal_myself_exited): New function.
(child_info_spawn::wait_for_myself): Ditto.
(child_info_spawn::has_execed_cygwin): Ditto.
(child_info_spawn::has_execed): Ditto. Replaces "hExeced" test.
(child_info_spawn::operator HANDLE&): New operator.
(child_info_spawn::worker): Define old "spawn_guts" as class member.
(ch_spawn): Declare.
(have_execed): Define.
(have_execed_cygwin): Ditto.
* cygheap.h: Update comment.
* dcrt0.cc (get_cygwin_startup_info): Use _CH_* enums.
(child_info_spawn::handle_spawn): Ditto.
(dll_crt0_0): Ditto.
(multiple_cygwin_problem): Ditto.
* exceptions.cc (chExeced): Delete obsolete declaration.
(ctrl_c_handler): Reference set_saw_ctrl_c via new ch_spawn global.
* globals.cc (hExeced): Delete.
* pinfo.cc (pinfo::thisproc): Refer to cygheap as ::cygheap for consistency in
handle naming when -DDEBUGGING.
(pinfo::init): Accommodate case where myself.h is known but h0 is passed in.
(pinfo::pinfo): New constructor for setting up a pinfo passed in by previous
exec'or.
(pinfo::proc_waiter): Don't handle subprocess if we're in the process of
exiting due to an exec of a cygwin process. Don't close rd_proc_pipe here.
Close it when we actually are finished with the process. Use new
ch_spawn.signal_myself_exited function to let exec stub know that subprocess
has exited.
(pinfo::wait): Clarify debugging output.
(pinfo::release): Use "close_h" to close all handles to avoid races.
(winpids::add): Assume that elements of the array do not need to be zeroed and
are properly initialized or suffer problems on pinfo::release. Don't close
hProcess since release does that now.
* pinfo.h: Update comment.
(pinfo_minimal): Move some elements from pinfo here so that child_info_spawn
can use them.
(pinfo): Inherit from pinfo_minimal.
(pinfo::pinfo): Modify to accommodate new pinfo_minimal.
(pinfo::allow_remove): New function.
* sigproc.cc (proc_subproc): Use boolean values for true/false. Implement
PROC_EXEC_CLEANUP.
(proc_terminate): Set ppid = 1 since the procs list will only be iterated when
the process has not execed. Don't do any cleanup here since it is now handled
in pinfo::release.
(sigproc_init): Initialize sync_proc_subproc earlier.
(child_info::child_info): Assume that all important fields are properly
initialized and avoid memset().
(child_info_spawn::child_info_spawn): Specifically test for execing and then
set up appropriate fields in the struct.
(child_info_spawn::cleanup): Define new function.
(child_info_spawn::record_children): Specifically test for being execed here.
Fill in pinfo_minimal part of children array.
(child_info_spawn::reattach_children): Use constructor to duplicate information
for previous exec'or. Add more debugging output.
(remove_proc): Force deletion of thread when exiting due to exec. Rely on
pinfo::cleanup in release.
* sigproc.h (PROC_EXEC_CLEANUP): New enum.
(PROC_DETACHED_CHILD): Delete.
* spawn.cc (chExeced): Delete.
(child_info_spawn::worker): Rename from spawn_guts. Use elements of
child_info_spawn throughout rather than ch.whatever. Use ::cygheap to refer to
global rather than element of child_info. Use wait_for_myself() rather than
waitpid(). Call child_info_spawn::cleanup on function return.
(spawnve): Reflect movement of spawn_guts functionality into
child_info_spawn::worker.
* syscalls.cc (popen): Ditto.
* winsup.h (spawn_guts): Delete declaration.
* fhandler.cc (fhandler_base::ptsname_r): Define.
* fhandler.h (fhandler_base::ptsname): Delete.
(fhandler_base::ptsname_r): Declare.
(fhandler_pty_master::ptsname_r): Declare.
* fhandler_tty.cc (fhandler_pty_master::ptsname): Delete.
(fhandler_pty_master::ptsname_r): New reentrant function derived from previous
ptsname.
* syscalls.cc (ptsname_r): Implement new function with functionality similar to
Linux.
(ptsname): Use ptsname_r () to fill out buf.
* include/cygwin/stdlib.h (ptsname_r): Declare.
* include/cygwin/version.h: Bump CYGWIN_VERSION_API_MINOR to 255 to reflect
export of ptsname_r.
* pinfo.cc (pinfo::wait): Return bool rather than int.
* pinfo.h (info::wait): Ditto.
(pinfo::reattach): Define !defined(_SIGPROC_H) case for consistency.
* sigproc.cc (child_info_spawn::reattach_children): Use correct dwProcessId
rather than pid when duplicating handle.
by calling NtQueryAttributesFile. Make STATUS_DIRECTORY_NOT_EMPTY
return value dependent on its status code. Add long comment to explain.
(unlink_nt): Add comment to explain flaw in checking the sharing mode.
Set status to STATUS_SUCCESS instead of 0. Add a retry loop to setting
the delete disposition and trying to move a directory to bin to
workaround rare cases of lingering, already deleted subdirectory
entries. Add long comment to explain.
(rename): Set status to STATUS_SUCCESS instead of 0.
logs easier. Throughout, change /dev/tty* to /dev/pty*. Throughout, add flags
argument to fhandler_*::dup methods.
* devices.in: Rename (temporarily?) /dev/ttyN to /dev/ptyN. Add /dev/ptymN
devices for pty masters.
* devices.cc: Regenerate.
* devices.h (MAX_CONSOLES): Set to max number supported by devices.in.
(fh_devices::FH_PTMX): Rename from FH_PTYM.
(device::operator int): Return by reference.
* dtable.cc (fh_alloc): Take pc as an argument rather than just the device.
This makes debugging easier since more information is available. Actually
implement handling for already-allocated pty master devices. Make different
decisions when generating fhandler for not-opened devices. Add kludge to deal
with opening /dev/tty.
(cnew_no_ctor): New macro.
(build_fh_pc): Make debugging output more verbose. Use new clone() fhandler
interface to duplicate archetypes. Reset last term opened.
(dtable::dup_worker): Use Use new clone() fhandler interface to duplicate
archetypes. Pass flags to child dup handler.
(dtable::dup3): Set O_NOCTTY flag if newfd is not stdin/stdout/stderr.
* fhandler.cc (fhandler_base::reset): Rename from operator =() and reduce
functionality and sense of copy direction.
(fhandler_base::open_with_arch): Use published interface to query io_handle().
Use new copyto() fhandler method to copy from/to found archetype.
* fhandler.h: Throughout, delete size(), add copyout, clone, and fhandler_*
(void *) methods.
(fhandler_base::reset): Rename from operator =().
(fhandler_termios::is_dev_tty): Delete.
(fhandler_termios): change "protected" region to "private".
(fhandler_termios::is_dev_tty): Delete.
(fhandler_termios): Rearrange protected/public.
(fhandler_termios::fhandler_termios): Remember last fhandler_termios "opened".
(fhandler_termios::~fhandler_termios): Forget last fhandler_termios opened.
(ioctl): Rename from ioctl_termios. Take a void * argument. Reflect argument
change in pinfo::set_ctty.
(fhandler_console::dup): Declare new function. Set ctty here if appropriate.
(fhandler_pty_master::from_master): Privatize.
(fhandler_pty_master::to_master): Ditto.
(fhandler_pty_master::dwProcessId): Ditto.
(fhandler_pty_master::fhandler_pty_master): Add an `int' argument.
(fhandler_pty_master::open_setup): Declare new function.
(fhandler_pty_master::~fhandler_pty_master): Declare new method.
(fhandler_nodevice): Remove commented out function declaration.
* fhandler_console.cc: Use get_ttyp() instead of tc() throughout.
(fhandler_console::dup): Define new function to set controlling ctty on dup, as
appropriate.
(fhandler_console::ioctl): Reflect ioctl_termios name change.
(fhandler_console::setup): Rename from get_tty_stuff.
(fhandler_console::open_setup): Reflect argument change in pinfo::set_ctty.
(fhandler_console::fhandler_console): Set _tc here.
* fhandler_termios.cc (handler_termios::ioctl): Rename. Take a void * arg like
other ioctl functions.
* fhandler_tty.cc (fhandler_pty_slave::dup): Call myself->set_ctty to
potentially reset the controlling terminal.
(fhandler_pty_slave::ioctl): Reflect name/arg change for ioctl_termios.
(fhandler_pty_slave::fhandler_pty_slave): Take a "unit" argument. Call setup()
here so that we will know the unit number of this fhandler as soon as possible.
Set the unit as appropriate.
(handler_pty_master::open): Move most stuff to constructor and open_setup.
(handler_pty_slave::open_setup): Reflect argument change in pinfo::set_ctty.
(handler_pty_master::open_setup): Define new function.
(fhandler_pty_master::cleanup): Clear handles as a flag that the destructor
does not have to do "close" operations.
(fhandler_pty_master::close): Ditto.
(fhandler_pty_master::~fhandler_pty_master): Define new method.
(fhandler_pty_master::ioctl): Reflect name/arg change for ioctl_termios.
(fhandler_pty_master::setup): Allocate tty here. Rely on handles being
returned from allocated test rather than opening them here. Avoid setting
_need_nl here since it is already zeroed in the constructor. Set up device
information with DEV_TTYM_MAJOR.
* path.h (path_conv &operator =): Take a const argument.
(path_conv::dup): Ditto.
(pathconv_arg::PC_OPEN): New enum.
(pathconv_arg::PC_CTTY): Ditto.
(path_types::PATH_CTTY): Ditto.
(path_types::PATH_OPEN): Ditto.
(path_conv::isopen): New method.
(path_conv::isctty_capable): Ditto.
* path.cc (path_conv::check): Set PATH_OPEN and PATH_CTTY as appropriate.
* pipe.cc (fhandler_pipe::open): Use copyto to copy pipe handle.
* syscall.cc (open): Reinstate fd > 2 check to disallow resetting ctty on
non-std* handles.
* tty.cc (tty_list::allocate): Pass out handles for allocated tty. use
`not_allocated' to find unallocated ttys. Avoid keeping the lock since the
allocation of the tty should be sufficient to prevent multiple access.
(tty::not_allocated): Clarify comment. Rename. Return handles when an unused
tty is found. Simply test for existing tty.
(tty::exists): Rewrite to use `not_allocated'.
* tty.h (NTTYS): Reset down to actual number supported by devices.in.
(tty::not_allocated): Declare new function.
(tty_list::allocate): Pass out read/write tty handles. Zero them when not
found.
* fhandler_proc.cc: Reflect name change from FH_PTYM -> FH_PTMX.
* pinfo.h (pinfo::set_ctty): Reduce/reorder arguments passed in.
* pinfo.cc (pinfo::set_ctty): Ditto. Just use tc() built into the passed-in
fhandler_termios pointer. Return true if ctty is assigned.
* syscalls.cc (open): Call build_fh_pc with PC_OPEN flag. Set PC_CTTY if
appropriate.
(stat_worker): Remove is_dev_tty () stuff.
* dtable.cc (fh_alloc): Revert ill-advised setting of major/minor. Use new
is_dev_tty to remember that this device was opened as /dev/tty.
* fhandler.cc (fhandler_base::fstat): Remove leftover debugging statement.
(fhandler_base::tcgetsid): New function.
* fhandler.h ((fhandler_base::tcgetsid): Declare new function.
(fhandler_base::is_dev_tty): Ditto.
(fhandler_termios::opened_as_dev_tty): Declare new field.
(fhandler_termios::is_dev_tty): Declare new function.
(fhandler_termios::tcgetsid): Ditto.
(fhandler_pty_common::use_archetype): Move here from subclass.
(fhandler_pty_slave::use_archetype): Move up.
(fhandler_pty_master::use_archetype): Ditto.
* fhandler_console.cc (fhandler_console::ioctl): Rename second argument from
`buf' to `arg' for consistency. Call ioctl_termios for common fhandler_termios
ioctl handling.
* fhandler_tty.cc (fhandler_pty_slave::ioctl): Call ioctl_termios for common
fhandler_termios ioctl handling.
(fhandler_pty_master::ioctl): Ditto.
* fhandler_termios.cc (fhandler_termios::tcgetsid): Implement new function.
(fhandler_termios::ioctl_termios): Ditto. Implements TIOCSCTTY handling.
* syscalls.cc (stat_worker): Set /dev/tty device info when appropriate.
* termios.cc (tcgetpgrp): Avoid extraneous "isatty" check.
(tcgetsid): Implement new function.
* include/cygwin/version.h: Bump CYGWIN_VERSION_API_MINOR to 253.
* include/sys/termios.h (TIOCSCTTY): Define.
* child_info.h: Redefine CURR_CHILD_INFO_MAGIC.
(child_info_fork::abort): Rename from handle_failure. Change arguments.
* cygtls.h (_local_storage::ttybuf): New field.
* dcrt0.cc (vapi_fatal): Split api_fatal. Add "in forked process" to message
when appropriate.
(api_fatal): Use vapi_fatal.
* devices.h: Make multiple inclusion safe.
(fh_devices): Add FH_CONS* stuff. Reorder slightly.
(device): Eliminate anonymous union. Add more ways to access minor/major.
(device::setunit): Accommodate no-longer-anonymous union.
(device::is_fs): Ditto.
(device::is_fs_special): Ditto.
(device::major): New function.
(device::minor): Ditto.
(device::is_device): New function.
(device::not_device): Ditto.
(device::operator int): New operator.
(device::operator fh_devices): Ditto.
(device::operator bool): Ditto.
(device::operator DWORD): Ditto.
(device::operator =): Ditto.
(isproc_dev): New function.
(isprocsys_dev): Ditto.
(iscons_dev): Ditto.
(istty_slave_dev): Ditto.
* devices.in: Add new "/dev/cons*" strings. Accommodate no-longer-anonymous
union throughout.
(BRACK): Use more precise method for initialization.
* devices.cc: Regenerate.
* dtable.cc (dtable::stdio_init): Use get_cttyp instead of get_tty.
(dtable::find_archetype): Use new DWORD operator in device to test archetypes.
(dtable::init_std_file_from_handle): Use different method to initialize 'dev'.
Adapt to different ctty handling and accommodate /dev/cons*.
(fh_alloc): Accommodate no-longer-anonymous union. Adapt to new /dev/cons*.
(build_fh_pc): Make debugging output more useful.
* exceptions.cc (ctrl_c_handler): Use get_cttyp instead of get_tty.
* external.cc (fillout_pinfo): Accommodate new cons* stuff.
* fhandler.cc (fhandler_base::read): Eliminate is_slow() test.
* fhandler.h (fhandler_base::*): Adapt to changes in device.h.
(fhandler_*::is_slow): Delete.
( fhandler_proc::get_proc_fhandler): Return fh_devices type.
* fhandler_console.cc (open_shared_console): New function.
(console_unit): New class.
(console_unit::console_unit): New constructor.
(enum_windows): New function. Declare as friend to console_unit.
(fhandler_console::set_unit): New function.
(fhandler_console::get_tty_stuff): Call set_unit to set the unit number and
determine if initialization is needed. Eliminate flags parameter.
(tty_list::get_cttyp): Rename (sorta) from get_tty. Return pointer to correct
tty_min.
(fhandler_console::open): Adapt to elimination of argument to get_tty_stuff.
(fhandler_console::output_tcsetattr): Properly detect error condition.
(fhandler_console::fixup_after_fork_exec): Adapt to get_tty_stuff() setting tc
automatically.
* fhandler_proc.cc: Use FH_BAD rather than 0 throughout where using fh_devices
enum.
(fhandler_proc::get_proc_fhandler): Return fh_devices. Adapt to devices.h
changes.
* fhandler_process.cc: Adapt to devices.h changes. Use FH_BAD rather than 0
throughout where using fh_devices enum.
* fhandler_procnet.cc: Ditto.
* fhandler_procsys.cc: Ditto.
* fhandler_procsysvipc.cc: Ditto.
* fhandler_tape.cc (fhandler_dev_tape::fhandler_dev_tape): Ditto.
* fhandler_termios.cc (handler_termios::bg_check): Use tc->ttyname() rather
than assuming that we can construct a tty.
* fhandler_tty.cc (fhandler_tty_master::fhandler_tty_master): Just return
get_minor() of dev.
(fhandler_pty_master::process_slave_output): Add slightly more debugging info.
(fhandler_tty_slave::fhandler_tty_slave): Change name from ntty to unit.
(fhandler_pty_master::open): Ditto.
(fhandler_tty_slave::ioctl): Adapt to change which causes ctty to represent a
complete device.
(fhandler_tty_master::init_console): Add debugging for failure path.
(fhandler_pty_master::setup): Use get_unit() to retrieve unit number rather
than relying on raw ntty.
(fhandler_pty_master::setup): Ditto.
* fhandler_virtual.h (virt_tab_t): Redefine fhandler as fh_devices.
* fork.cc: Remove obsolete vfork stuff.
(frok::child): Don't assume that a ctty == 0 is valid.
* mount.cc (mount_info::conv_to_win32_path): Adapt to device struct changes.
(mount_info::conv_to_win32_path): Ditto.
* path.cc (path_conv::check): Retrive major/minor numbers via a method rather
than accessing them directly from device. Rely on dev operators to
set/retrieve device information as required by device struct change.
* path.h (isproc_dev): Move to devices.h.
(isprocsys_dev): Ditto.
(isvirtual_dev): Ditto.
(path_conv:{isdevice,isfifo,isspecial,iscygdrive,issocket,get_devn,get_unitn}):
Use device methods to access/manipulate devices.
* pinfo.cc (pinfo::exit): Don't assume that ctty == 0 is valid. Use iscons_dev
to determine if a device is a console.
(_pinfo::_ctty): Use device::parse to generate tty/cons name.
(_pinfo::set_ctty): Don't assume that ctty == 0 is valid. Remove redundant
info from debugging.
* shared.cc (offsets): Remove console offset.
* shared_info.h (shared_locations): Ditto.
* syscalls.cc (umask): Use device methods to manipulate device information.
(ctermid): Use device::parse to generate term device name.
* tlsoffsets.h: Regenerate.
* tty.cc (ttyslot): Return minor number of ctty since ctty now represents a
full device.
(tty::create_master): Set ctty to a complete device.
(tty_list::attach): Rework to detect new /dev/cons* stuff.
(tty_list::terminate): Adapt to changes to ctty.
(tty_list::init): Adapt to change to setntty - pass in device major number.
(tty::exists): Use get_unit() to retrive tty unit number.
(tty::open_mutex): Ditto.
(tty::open_inuse): Ditto.
(tty::create_inuse): Ditto.
(tty::get_event): Ditto.
(tty_min::ttyname): Define new function.
* tty.h (tty_min::ntty): Redefine as fh_devices.
(tty::exists): Use get_unit() to retrive tty unit number.
(tty::open_mutex): Ditto.
(tty::open_inuse): Ditto.
(tty::create_inuse): Ditto.
(tty::get_event): Ditto.
(tty_min::ttyname): Declare new function.
(tty::getntty): Declare as const.
(tty_list::operator []): Assure that only minor part of argument is used.
* dll_init.cc (dll_list::alloc): Detect mismatch of data segments early issuing
an explicit error message if necessary.
* heap.cc (heap_init): Adapt to changes from fork->handle_failure to
fork->abort.
* pinfo.h (EXITCODE_FORK_FAILED): New enum. (from Ryan Johnson)
* sigproc.cc (child_info_fork::abort): Rename from handle_failure. Change
arguments to allow passing in a printf-like message.
* winsup.h (api_fatal): Delete macro definition.
(api_fatal): Redefine from __api_fatal.
(vapi_fatal): Declare new function.
* include/sys/strace.h (strace_vprintf): Define new macro.
* ntdll.h (_SYSTEM_INFORMATION_CLASS): Add SystemHandleInformation.
(fhandler_socket::write): Declare.
* fhandler_procsys.cc (fhandler_procsys::read): Add FIXME comment.
(fhandler_procsys::write): Ditto.
* fhandler_socket.cc (fhandler_socket::read): New method.
(fhandler_socket::write): New method.
* syscalls.cc: Rearrange order of read/write functions.
(read): Call fhandler read method directly instead of just readv.
(readv): Remove EINTR loop. This is done in all affected fhandler's
now.
(write): Call fhandler write method directly instead of just writev.
Fix debug output.
* debug.cc (close_handle): Call debugger on failure.
* devices.in (device::tty_to_real_device): Delete.
* devices.h (device::tty_to_real_device): Ditto.
* devices.cc: Regenerate.
* dtable.cc: Delete old ifdef'ed vfork code.
(dtable::release): Don't handle archetype here.
(dtable::init_std_file_from_handle): Consolidate console tests. Generate
major/minor for tty ASAP. Fix incorrect setting of DEV_TTYS* for serial.
(fh_alloc): New function derived from build_fh_pc. Pass current tty when
building tty.
(build_pc_pc): Use fh_alloc to create. Set name from fh->dev if appropriate.
Generate an archetype or point to one here.
(dtable::dup_worker): Deal with archetypes. Rely on = operator copying whole
class rather than just fhandler_base.
(dtable::fixup_after_exec): Call close_with_arch to handle closing of fhandlers
with archetypes.
* fhandler.cc (fhandler_base::operator =): Call memcpy with fhandler's size()
rather than sizeof fhandler_base.
(fhandler_base::open_with_arch): New function. Handles opening of fhandler's
with archetypes, dealing with usecounts, etc.
(fhandler_base::close_with_arch): Ditto for close.
* fhandler.h: Many changes for archetypes.
(fhandler_base::set_name): Set both normalized path and regular path.
(fhandler_base::open_with_arch): New function.
(fhandler_base::open_setup): Ditto.
(fhandler_base::use_archetype): Ditto.
(fhandler_base::_archetype_usecount): Ditto.
(fhandler_*::size): Ditto.
(fhandler_dev_tape::open): Remove virtual decoration.
(fhandler_console::use_archetype): New function. Return true.
(fhandler_console::open_setup): New function.
(fhandler_console::dup): Delete.
(fhandler_tty_slave::fhandler_tty_slave): Redeclare to take an argument.
(fhandler_tty_slave::use_archetype): New function. Return true.
(fhandler_tty_slave::cleanup): New function.
(fhandler_pty_master::use_archetype): New function. Return true.
(fhandler_pty_master::cleanup): New function.
(fhandler_pty_master::is_tty_master): New function. Return false.
(fhandler_tty_master::is_tty_master): New function. Return true.
(fhandler_dev_dsp::fhandler_dev_dsp): New function. Return true.
(report_tty_counts): Only report on archetype's usecount if there is one.
* fhandler_console.cc (fhandler_console::get_tty_stuff): Remove handling of
setsid, set_ctty, set_flags, and manage_console_count.
(fhandler_console::open_setup): New function. Implement functionality removed
from get_tty_stuff.
(fhandler_console::dup): Delete.
(fhandler_console::output_tcsetattr): Set errno on error.
(fhandler_console::fhandler_console): Set device early.
(fhandler_console::init): Use open_with_arch to open console handles.
(fhandler_console::fixup_after_fork_exec): Nuke most of the stuff for dealing
with console handles.
* fhandler_dsp.cc (fhandler_dev_dsp::open): Remove archetype handling.
(fhandler_dev_dsp::write): Ditto.
(fhandler_dev_dsp::read): Ditto.
(fhandler_dev_dsp::close): Ditto.
(fhandler_dev_dsp::dup): Ditto.
(fhandler_dev_dsp::ioctl): Ditto.
(fhandler_dev_dsp::fixup_after_fork): Ditto.
(fhandler_dev_dsp::fixup_after_exec): Ditto.
* fhandler_tty.cc (fhandler_tty_common::__acquire_output_mutex): Add a little
more debugging.
(fhandler_tty_common::__release_output_mutex): Ditto.
(fhandler_pty_master::process_slave_output): Ditto. Don't do signal handling
or pthread_cancel handling in the tty master thread.
(process_output): Minor reorg.
(fhandler_tty_slave::fhandler_tty_slave): Set device based on new ntty
argument.
(fhandler_tty_slave::open): Remove archetype handling. Move some processing
into open_setup().
(fhandler_tty_slave::open_setup): New function.
(fhandler_tty_slave::cleanup): New function.
(fhandler_tty_slave::close): Remove archetype handling. Move some processing
into cleanup().
(fhandler_tty_slave::init): Rename argument from f to h. Open device using
open_with_arch(). Remove archetype handling.
(fhandler_pty_master::dup): Ditto.
(fhandler_pty_master::open): Ditto.
(fhandler_pty_master::close): Ditto. Move some handling to cleanup().
(fhandler_pty_master::cleanup): New function.
(fhandler_tty_master::init_console): Give unique name to captive console
fhandler.
* pinfo.cc (_pinfo::set_ctty): Rename argument from arch to fh. Eliminate
archetype assumption.
* syscalls.cc (close_all_files): Use close_with_arch for closing.
(open): Use open_with_arch() rather than open().
(close): Use close_with_arch() rather than close().
* fhandler_socket.cc (fhandler_socket::connect): Ditto.
(fhandler_socket::accept4): Ditto.
(fhandler_socket::recvfrom): Ditto.
(fhandler_socket::recvmsg): Ditto.
(fhandler_socket::sendto): Ditto.
(fhandler_socket::sendmsg): Ditto.
* flock.cc (lf_setlock): Allow to cancel thread running blocking
file lock. Try to make code more readable.
(lockf): Call pthread_testcancel.
* mmap.cc (msync): Ditto.
* posix_ipc.cc (ipc_cond_timedwait): Call pthread::static_cancel_self
rather than pthread_testcancel.
* select.cc (cygwin_select): Call pthread_testcancel.
* syscalls.cc (pread): Ditto.
(pwrite): Ditto.
(readv): Ditto.
(writev): Ditto.
(open): Ditto.
(close): Ditto.
(fsync): Ditto.
* termios.cc (tcdrain): Ditto.
* thread.cc: Align list of cancellation points with above changes.
Mark not-implemented functions, too.
(cancelable_wait): Don't set unused object indices to WAIT_FAILED
since that could result in wrong behaviour. Set them to the invalid
value WAIT_TIMEOUT + 1 instead.
* autoload.cc: Enable autoloading advapi32 functions.
* environ.cc (regopt): Use wide char arguments in reg_key functions.
* fhandler_console.cc (beep): Ditto. Use WCHAR throughout.
* registry.cc (reg_key): Rewrite reg_key class to use native NT registry
functions. Use WCHAR string parameters throughout. Use PCWSTR rather
than const WCHAR. Drop multibyte char functionality. Drop unused
methods.
(get_registry_hive_path): Use RtlQueryRegistryValues to fetch path from
registry.
(load_registry_hive): Drop useless check for user hive being available.
Load hive using NtLoadKey.
* registry.h: Accommodate above changes.
* sched.cc (sched_rr_get_interval): Use wide char arguments in reg_key
functions.
* shared.cc (init_installation_root): Ditto.
(shared_info::init_obcaseinsensitive): Use RtlQueryRegistryValues to
fetch obcaseinsensitive value.
(shared_info::heap_slop_size): Use wide char arguments in reg_key
functions.
(shared_info::heap_chunk_size): Ditto.
* syscalls.cc (gethostid): Ditto.
* winsup.h (__WIDE): Define.
(_WIDE): Define.
* libc/minires-os-if.c (get_registry_dns_items): Don't fetch values
from registry. Just extract them from given UNICODE_STRING parameter.
(get_registry_dns): Fetch all registry values at once using
RtlQueryRegistryValues.
(UuidCreateSequential): Remove.
* passwd.cc (internal_getpwsid): Avoid a strict-aliasing compiler
error with gcc 4.5.1.
* fhandler_floppy.cc (fhandler_dev_floppy::get_drive_info): Ditto.
* ntdll.h (NtAllocateUuids): Declare.
* syscalls.cc (gethostid): Use NtAllocateUuids function rather than
UuidCreateSequential/UuidCreate to get rid of rpcrt4 dependency.
more generally available.
(stop_transaction): Ditto.
(unlink_nt): Potentially start transaction when trying to delete file
with DOS R/O attribute set. If file is .lnk symlink, check for number
of hardlinks. Add "out" label and only return via "out". Rearrange
reversion of DOS R/O attribute and, on success, only revert R/O
attribute if file is .lnk symlink with more than one hardlink. Add
length comment to explain why.
fhandler.
* fhandler.cc (fhandler_base::fstatvfs): Keep handle in created
path_conv.
* fhandler.h (fhandler_base::get_stat_access): New method.
(fhandler_base::get_stat_handle): New method.
* fhandler_disk_file.cc (fhandler_base::fstat_by_handle): Use handle
returned by get_stat_handle. Only request inode from system if it
isn't already set in the fhandler, and only for filesystems supporting
them.
(fhandler_base::fstat_fs): Use handle returned by get_stat_handle.
Change the way open_fs is called. Explain why.
(fhandler_base::fstat_helper): Use handle returned by get_stat_handle.
Never use 0 inode number. Simplify executable recognition by re-using
get_stat_handle if file could be opened with sufficient rights.
(fhandler_disk_file::fstatvfs): Use handle returned by get_stat_handle.
(fhandler_disk_file::facl): Use handle returned by get_stat_handle in
GETACL and GETACLCNT cases.
(fhandler_disk_file::link): Use handle returned by get_stat_handle
instead of opening file here again. Add comment.
(readdir_get_ino): Keep handle in created path_conv and drop
opening file.
* ntdll.h (wait_pending): New helper function.
* path.cc (symlink_info::check): Drop unused 'opt' parameter from
declaration. Add path_conv_handle argument.
(path_conv::check): Make sure conv_handle is closed. Keep
PC_KEEP_HANDLE flag in pflags_or. Accommodate call to sym.check to
new args.
(path_conv::~path_conv): Close conv_handle.
(symlink_info::check_shortcut): Don't re-open file here, just use
incoming handle. Drop goto's and label out.
(symlink_info::check_sysfile): Don't re-open file here, just use
incoming handle. Keep track of file position to accommodate the fact
that file has been opened asynchronously in calling function.
(symlink_info::check_nfs_symlink): Don't re-open file here, just use
incoming handle.
(symlink_info::check): Drop unused 'opt' parameter. Add
path_conv_handle argument. Always try to open file with GENERIC_READ
rights first to allow reading file content w/o having to re-open the
file. Drop back to READ_CONTROL | FILE_READ_ATTRIBUTES otherwise.
Call symlink test functions (except for check_reparse_point) only if
file could be opened with GENERIC_READ. Keep file handle open if
PC_KEEP_HANDLE is set in pflags.
* path.h (enum pathconv_arg): Add PC_KEEP_HANDLE flag.
(class path_conv_handle): New class.
(class path_conv): Add conv_handle member.
(path_conv::operator =): Duplicate conv_handle.
(path_conv::handle): New method.
(path_conv::access): New method.
(path_conv::reset_conv_handle): New method.
(path_conv::close_conv_handle): New method.
* select.cc (peek_pipe): Reorganize slightly. Don't attempt to check a handle
if it has ongoing I/O.
(select_pipe_info::select_pipe_info): Delete definition.
(select_pipe_info::~select_pipe_info): Delete definition.
(thread_pipe): Get rid of WFMO call. Reorganize loop.
(pipe_cleanup): Remove dependence on destructor.
(thread_serial): Reorganize loop.
* select.h (select_pipe_info): Empty this class since it no longer has any
special requirements (for now).
* syscalls.cc (readv): Remove an unneeded debug printf.
(user_info::version): Make LONG to accommodate spinlock use.
(user_info::create): New static function renamed from user_info_create.
(user_info::initialize): New private function renamed from
user_info_initialize.
(SHARED_VERSION): Delete.
(SHARED_VERSION_MAGIC): Ditto.
(USER_VERSION_MAGIC): Ditto.
(SHARED_INFO_CB): Ditto.
(USER_VERSION): Ditto.
(USER_VERSION_MAGIC): Ditto.
(CURR_SHARED_MAGIC): Update.
(CURR_USER_MAGIC): Ditto.
(shared_info::version): Make LONG to accommodate spinlock use.
(shared_info::create): New static function mirroring user_info::create.
(dll_crt0_1): Accommodate change to user_info::initialize.
* spinlock.h (spinlock::setto): New variable member.
(spinlock::done): New function.
(spinlock::spinlock): Generalize to allow arbitrary values and timeouts. Call
done() when lock is not needed.
* ntdll.h: Make multiple-inclusion safe.
(NtQuerySystemTime): Declare.
* shared.cc (installation_root_inited): Rename from shared_mem_inited.
(init_installation_root): Make inline. Use a spinlock to ensure that this is
initialized only once per session.
(user_info::initialize): Rename from user_shared_initialize. Protect with
spinlock on sversion and remove other spinlock-like things. Remove reference
to user_shared since it is now implicit. Refer to spinlock version of
multiple_cygwin_problem to ensure that any spinlock is released.
(user_info::create): Rename from user_shared_create. Accommodate change from
user_shared_initialize to user_info::initialize.
(shared_info::create): New inline function.
(shared_info::initialize): Protect with spinlock on sversion. Move heap_init
back under specific control of shared_info spinlock. Remove reference to
SHARED_INFO_CB and just use sizeof(*this).
(memory_init): Move all locking into respective functions where it is needed.
Accommodate name changes. Remove call to heap_init().
* syscalls.cc (seteuid32): Accommodate name change to user_info::create().
* mount.cc (mount_info::create_root_entry): Report on errors from add_item
since they should be nonexistent.
(mount_info::init): Don't initialize nmounts. It should already be zero. Give
more verbose error when root_idx < 0. Implicitly use this pointer rather than
explicitly referencing mount_table->.
(mount_info::add_item): Minor whitespace fix.
blessed_executable_suffixes to static.
(rename): Revert meaning of old_explicit_suffix. Change the rules
for appending a .exe suffix and (yikes!) document them.
(pipe2): Export.
* dtable.cc (dtable::dup_worker): Take additional flags parameter.
Handle O_CLOEXEC flag.
(dtable::dup3): Rename from dup2. Take additional flags parameter.
Check for valid flags. Drop check for newfd == oldfd.
* dtable.h (dtable::dup_worker): Add flags parameter.
(dtable::dup3): Rename from dup2.
* fcntl.cc (fcntl64): Add F_DUPFD_CLOEXEC case.
* fhandler.h (fhandler_mailslot::get_object_attr): Add flags parameter.
* fhandler.cc (fhandler_base::open): Use security attribute with
inheritance according to setting of O_CLOEXEC flag.
* fhandler_console.cc (fhandler_console::open): Ditto.
* fhandler_fifo.cc (sec_user_cloexec): New inline function to
create security attribute with inheritance according to setting of
O_CLOEXEC flag.
(fhandler_fifo::open): Call sec_user_cloexec to fetch security
attribute.
(fhandler_fifo::wait): Ditto.
* fhandler_mem.cc (fhandler_dev_mem::open): Ditto.
* fhandler_mailslot.cc (fhandler_mailslot::get_object_attr): Take
additional flags parameter. Use security attribute with inheritance
according to setting of O_CLOEXEC flag.
(fhandler_mailslot::open): Call get_object_attr with flags parameter.
* fhandler_registry.cc (fhandler_registry::open): Call set_close_on_exec
on real handles to accommodate O_CLOEXEC flag.
* fhandler_tty.cc (fhandler_tty_slave::open): Ditto.
* fhandler_tape.cc: Create mutex with inheritance according to setting
of O_CLOEXEC flag.
* pipe.cc: Replace usage of O_NOINHERIT with O_CLOEXEC.
(fhandler_pipe::init): Simplify setting close_on_exec flag.
(fhandler_pipe::open): Remove setting close_on_exec flag.
(fhandler_pipe::create): Use security attribute with inheritance
according to setting of O_CLOEXEC flag.
(pipe2): New exported function.
* posix_ipc.cc: Throughout, open backing files with O_CLOEXEC
flag to follow POSIX semantics.
* security.h (sec_none_cloexec): New define.
* syscalls.cc (dup): Add missing extern "C" qualifier. Accommodate
renaming of dtable::dup2 to dtable::dup3.
(dup2): Ditto. Check newfd == oldfd here.
(dup3): New function. Check newfd == oldfd here.
(open): Set close_on_exec flag according to O_CLOEXEC flag before
calling fhandler->open.
* include/cygwin/version.h (CYGWIN_VERSION_API_MINOR): Bump.
according to context. Throughout, replace hMainThread with
GetCurrentThread/NtCurrentThread according to context.
* dcrt0.cc (dll_crt0_0): Drop duplication of GetCurrentProcess to
hMainProc. Drop duplication of GetCurrentThread to hMainThread.
* dtable.cc (dtable::stdio_init): Remove useless comment.
* globals.cc (hMainProc): Remove.
(hMainThread): Remove.
* ntdll.h (NtCurrentProcess): Define.
(NtCurrentThread: Define.
files in this case, instead of moving them to the recycler. Create
even more unique filename. Add comment to explain filename.
(unlink_nt): Remove code returning with EBUSY on remote shares.
Set bin_stat to move_to_bin except on NFS. Add comment to explain.
SubstituteName for volume string to recognize volume mount points.
Reuse subst when calling sys_wcstombs.
* syscalls.cc (rename): Set errno to EBUSY when trying to rename
volume mount points. Explain why.
(ro_u_sys): Ditto.
* syscalls.cc (nt_path_has_suffix): Replace with ...
(nt_path_has_executable_suffix): New function checking for explicit
executable suffixes.
(rename): Call nt_path_has_executable_suffix instead of
nt_path_has_suffix. Check oldpath for nt_path_has_executable_suffix
as well to set old_explicit_suffix.
CW_SET_EXTERNAL_TOKEN.
Add new enum CW_TOKEN_IMPERSONATION, CW_TOKEN_RESTRICTED.
* cygheap.h (cyguser): New flags ext_token_is_restricted,
curr_token_is_restricted and setuid_to_restricted.
* external.cc (cygwin_internal): Add CW_SET_EXTERNAL_TOKEN.
* sec_auth.cc (set_imp_token): New function.
(cygwin_set_impersonation_token): Call set_imp_token ().
* security.h (set_imp_token): New prototype.
* spawn.cc (spawn_guts): Use CreateProcessAsUserW if restricted token
was enabled by setuid(). Do not create new window station in this case.
* syscalls.cc (seteuid32): Add handling of restricted external tokens.
Set HANDLE_FLAG_INHERIT for primary token.
(setuid32): Set setuid_to_restricted flag.
* uinfo.cc (uinfo_init): Do not reimpersonate if restricted token was
enabled by setuid (). Initialize user.*_restricted flags.
call initial_setlocale from here.
* syscalls.cc (initial_setlocale): Set internal charset and revert
application locale to "C".
(setlocale): Don't set Cygwin's internal charset here.
* dcrt0.cc (dll_crt0_1): Call setlocale (LC_CTYPE, "") here, just
before resetting application locale to "C".
* environ.cc (environ_init): Drop code setting locale here.
* syscalls.cc (check_codepage): Break out check for required codepage
from internal_setlocale.
(internal_setlocale): Just convert CWD and $PATH from old charset to
new charset and set internal charset.
(setlocale): Change accordingly. Don't require LC_ALL or LC_CTYPE to
store old locale value. Always call internal_setlocale if charset
changed due to locale environment changes.
returning pointer to posix path.
(cwdstuff::reset_posix): Convert to non-inline method taking a wchar_t
pointer.
* path.cc (cwdstuff::set): Revert change from 2009-05-13. Set posix
to valid incoming path again.
(cwdstuff::reset_posix): New implementation setting posix path from
incoming wchar_t path. Explain usage.
(cwdstuff::get_posix): Drop implementation.
(cwdstuff::get): Drop special case to handle empty posix path.
* syscalls.cc (internal_setlocale): Store old posix cwd as wide char
path. Restore posix cwd using new charset. Explain why.
* sigproc.cc (wait_for_sigthread): Ditto. Don't synchronize with wait_sig
after receiving an event that it is ready to go.
(init_sig_pipe): New function.
(wait_sig): Call init_sig_pipe to create pipes for communicating signals to
this process. Don't send sigCONT signal when initializing.
* fork.cc (frok::child): Accommodate wait_for_sigpipe parameter change.
* fhandler.h (fhandler_*::write): Make ssize_t/__stdcall.
(fhandler_*::write_overlapped): Ditto.
(fhandler_*::raw_write): Ditto.
(fhandler_*::readv): Ditto.
(fhandler_*::writev): Ditto.
(fhandler_*::raw_read): Make __stdcall.
* fhandler: Accommodate changes to read/write functions throughout.
* fhandler_clipboard.cc: Ditto.
* fhandler_console.cc: Ditto.
* fhandler_dsp.cc: Ditto.
* fhandler_fifo.cc: Ditto.
* fhandler_mailslot.cc: Ditto.
* fhandler_mem.cc: Ditto.
* fhandler_mem.cc: Ditto.
* fhandler_random.cc: Ditto.
* fhandler_tape.cc: Ditto.
* fhandler_tty.cc: Ditto.
* fhandler_virtual.cc: Ditto.
* fhandler_windows.cc: Ditto.
* fhandler_zero.cc: Ditto.
* syscalls.cc (readv): Use ssize_t as temp variable.
* fhandler.cc (fhandler_base::read): Coerce returned len to signed or it will
never be treated as < 0.
(fhandler_base::wait_overlapped): Minimize calls to GetLastError. Remove
duplicate debugging test. Fix error return.
* fhandler.h (fhandler_fifo::fifo_name): Declare new function.
(fhandler_fifo::close): Ditto.
(fhandler_fifo::dup): Ditto.
(fhandler_fifo::close_on_exec): Ditto.
* fhandler.cc (fhandler_fifo::fifo_name): Define new function.
(FIFO_BUF_SIZE): New define.
(cnp): Ditto.
(fhandler_fifo::open): Rework. Use cnp to open named pipe. Always open write
side as a client. Open dummy client when writing and can't connect.
(wait): Rework. Implement fifo_wait_for_next_client. Handle signals during
connect better. Add new fifo_wait_for_server code which polls
(sigh) waiting for server.
(fhandler_fifo::raw_read): Handle transition states when one client closes and
another is available.
(fhandler_fifo::close): Define.
(fhandler_fifo::dup): Ditto.
(fhandler_fifo::close_on_exec): Ditto.
Corinna Vinschen
Yaakov Selkowitz
Christopher Faylor
Eric Blake