In winsup/cygwin/fhandler/serial.cc, the function
fhandler_serial::switch_modem_lines() is called when TIOCMBIS/TIOCMBIC
are used in an ioctl() call.
This function uses EscapeCommFunction() for setting and resetting RTS
and DTR signals of a serial port. Unfortunately, this function does not
work on USB CDC devices.
This is not a true bug of CYGWIN but an issue of the usbser.sys driver,
from Windows 2000 to the latest Windows 11. Both 32bit and 64bit
versions of the operating system are affected. Actually, I tested
EscapeCommFunction() also when using a real UART, based on the
traditional 16550 driver and it works fine. Using thirdy party CDC
drivers, like the one provided by FTDI for their USB bridge chips,
probably also works.
However, it is also possible to drive the RTS/DTR signals by writing
their state with SetCommState(), which proved to be working fine all
types of connection. This is also a better solution for handling these
signals since RTS/DTR can be set at the same time rather than having two
separate calls with a visible delay between them.
Report 0 instead of 268435455 (i.e. 0xFFFFFFF) in the tty field of
/proc/*/stat for processes without a controlling terminal. This is what
the procps utility expects when selecting or excluding such processes.
..., not just '#if defined(__CYGWIN__)'. (Exception: 'clog10l' which currently
indeed is for Cygwin only.)
This completes 2017-07-05 commit be3ca39474
"Fixed warnings for some long double complex methods" after Aditya Upadhyay's
work on importing "Long double complex methods" from NetBSD.
For example, this changes GCC/nvptx libgfortran 'configure' output as follows:
[...]
checking for ccosf... yes
checking for ccos... yes
checking for ccosl... [-no-]{+yes+}
[...]
..., and correspondingly GCC/nvptx 'nvptx-none/libgfortran/config.h' as
follows:
[...]
/* Define to 1 if you have the `ccosl' function. */
-/* #undef HAVE_CCOSL */
+#define HAVE_CCOSL 1
[...]
Similarly for 'ccoshl', 'cexpl', 'cpowl', 'csinl', 'csinhl', 'ctanl', 'ctanhl',
'cacoshl', 'cacosl', 'casinhl', 'catanhl'. ('conjl', 'cprojl' are not
currently being used in libgfortran.)
This in turn simplifies GCC/nvptx 'libgfortran/intrinsics/c99_functions.c'
compilation such that this files doesn't have to provide its own
"Implementation of various C99 functions" for those, when in fact they're
available in newlib libm.
Commit 737e2004a3 accidentally introduced a call to strlen in
code used with wide character strings in case of wcsftime. Use
STRLEN instead.
Fixes: 737e2004a3 ("strftime.c(__strftime): add %q, %v, tests; tweak %Z doc")
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Drop 'makedocbook --cache' (any dependency on the man-cache rule which
invokes that was dropped by the non-recursive make changes)
Instead, add some explicit locking which prevents processes colliding
over the file containing generated python code for the parser table.
This adds an extra section to the stackdump, which lists the loaded
modules and their base address. This is perhaps useful as it makes it
immediately clear if RandomCrashInjectedDll.dll is loaded...
Future work: It seems like the 'InMemoryOrder' part of
'InMemoryOrderModuleList' is a lie?
> Loaded modules
> 000100400000 segv-test.exe
> 7FFF2AC30000 ntdll.dll
> 7FFF29050000 KERNEL32.DLL
> 7FFF28800000 KERNELBASE.dll
> 000180040000 cygwin1.dll
> 7FFF28FA0000 advapi32.dll
> 7FFF29F20000 msvcrt.dll
> 7FFF299E0000 sechost.dll
> 7FFF29B30000 RPCRT4.dll
> 7FFF27C10000 CRYPTBASE.DLL
> 7FFF28770000 bcryptPrimitives.dll
This adds an additional column to the stack trace in a .stackdump file,
which gives the stack frame return address as a module name+offset. This
makes it a possible to convert the address to a function name without
having to guess what module the address belongs to.
> Stack trace:
> Frame Function Args
> 0007FFFFCC30 0001004010E9 (000180048055, 000180046FA0, 000000000002, 00018031E160) segv-test.exe+0x10E9
> 0007FFFFCD30 0001800480C1 (000000000000, 000000000000, 000000000000, 000000000000) cygwin1.dll+0x80C1
> 0007FFFFFFF0 000180045C86 (000000000000, 000000000000, 000000000000, 000000000000) cygwin1.dll+0x5C86
> 0007FFFFFFF0 000180045D34 (000000000000, 000000000000, 000000000000, 000000000000) cygwin1.dll+0x5D34
> End of stack trace
Loosely based on this patch [1] by Brian Dessent.
[1] https://cygwin.com/pipermail/cygwin-patches/2008q1/006306.html
Every time the cygheap is initialized, that is, on each fork
or exec, cygheap_init() *again* computes the bucket size values
and stores them in the cgyheap, albeit they are always the
same values anyway.
Make bucket_val a local const array, statically initialized
instead.
Fixes: 61522196c7 ("* Merge in cygwin-64bit-branch.)"
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Now that the cygheap isn't part of the CYgwin DLL anymore, we have a
known memory location which is not known in maps output. Fix that by
checking for cygheap address (same in all processes) and add to output.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Prior to 591fec858d01 ("Cygwin: decouple cygheap from Cygwin DLL")
the .cygheap section was required to stay the last section in the
final binary. That required some juggling with objcopy to make
sure the .gnu_debuglink section is prior to the .cygheap section
in the final DLL.
This isn't required anymore, so just drop it.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Another reason ASLR may fail is the coupling of the standard shared
mem regions (global, userinfo, process info, shared console) to the
address of the Cygwin DLL. They are always placed in fixed addresses
preceeding the Cygwin DLL's address. With ASLR this is bound to fail.
Use a fixed, unused memory area to place the shared mem regions.
This also allows to simplify the shared memory creation. There's
no reason anymore to rebase the regions and rather than offsets,
just use the addresses directly.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
One reason that ASLR is tricky is the fact that the cygheap
is placed at the end of the DLL and especially that it's expected
to be growable. To support ASLR, this construct must go.
Define dedicated cygheap memory region and reserve entire region.
Commit 3 Megs, as was the default size of the cygheap before.
Fix linker script accordingly, drop a now useless version check
in get_cygwin_startup_info().
Collect all info about memory layout in one header file, so
the mem layout is documented in one logical place and not
in heap.cc arbitrarily.
Use info from this file throughout.
This is to prepare for ASLR support.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Exception handling was *still* printing addresses as 44 bit values,
but Windows supports a 48 bit virtual address space since Windows
8.1. Fix that.
Fixes: e1254add73 ("Cygwin: Allow accessing 48 bit address space in Windows 8.1 or later")
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The first attempt to support the 64-bit mode had two bugs:
1. The saved general-purpose register 31 value was overwritten with the saved
link register value.
2. The link register was saved and restored using 32-bit instructions.
Use 64-bit store/load instructions to save/restore the link register. Make
sure that the general-purpose register 31 and the link register storage areas
do not overlap.
.com is a remnant from the past. There are only five executables
left:
chcp.com
format.com
mode.com
more.com
tree.com
Calling them on the command line already requires to use the
suffix anyway. So drop useless .com test from the execve test
for scripts (they are handled earlier in the same function
as executables) and do not handle them like .exe suffixes in
other functions.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
This reverts commit 7589034cc3.
The previous commit 14816de9af69 ("Cygwin: spawn: drop special handling
for cmd.exe and command.com") make this patch unnecessary. The filename
argument (i. e., run_path in the caller) is now always non-NULL.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Apparently at one point handling cmd.exe and command.com special
made sense, but what that should be has never been documented.
There's also no clear reason why cmd.exe is different from any
other native executable. Additionaly, checking for command.com
is entirely useless on 64 bit Windows anyway.
Just drop this code.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
> ERROR: xref linking to Stubs has no generated link text.
> Error: no ID for constraint linkend: Stubs.
(Despite saying "ERROR", this is actually a warning, and manpages are
still generated)
Improve chapter-texi2docbook so it generates elements for texinfo
sections as well, so that a cross-reference to the "Stubs" section
contains a valid element ID.
- If the command executed is 'cmd.exe /c [...]', runpath in spawn.cc
will be NULL. In this case, is_console_app(runpath) check causes
access violation. This case also the command executed is obviously
console app., therefore, treat it as console app to fix this issue.
Addresses: https://github.com/msys2/msys2-runtime/issues/108
A recent change to the Makefile.in for riscv resulted in the
machine/syscall.h header not being installed. This updates the file
to install this file again.
Signed-off-by: Simon Cook <simon.cook@embecosm.com>
According to POSIX and the Linux man page, select(2) is supposed to
report read ready if a file is at EOF. In the case of a FIFO, this
means that the pipe is empty and there are no writers. But there
seems to be an undocumented exception, observed on Linux and other
platforms: If no writer has ever been opened, then select(2) does not
report read ready. This can happen if a reader is opened with
O_NONBLOCK before any writers have opened.
This commit makes Cygwin consistent with those other platforms by
introducing a special EOF test, fhandler_fifo::select_hit_eof, which
returns false if there's never been a writer opened.
To implement this we use a new variable '_writer_opened' in the FIFO's
shared memory, which is set to 1 the first time a writer opens. New
methods writer_opened() and set_writer_opened() are used to test and
set this variable.
Addresses: https://cygwin.com/pipermail/cygwin/2022-September/252223.html
newlib/libc/sys/arm/Makefile.inc was modified but automake was not rerun in
commit 5230eb7f8c
Implement sysconf for Arm
on arm-none-eabi target this caused
ld: B/arm-none-eabi/lib/libg.a(libc_a-mallocr.o): in function `malloc_extend_top':
S/newlib-cygwin/newlib/libc/stdlib/_mallocr.c:2161: undefined reference to `sysconf'
- add support for using sysconf to get page size in _mallocr.c via
HAVE_SYSCONF_PAGESIZE flag set in configure.host
- set flag in configure.host for arm and add a default sysconf implementation
in libc/sys/arm that returns the page size
- the default implementation can be overridden outside newlib to allow a
different page size to improve malloc on devices with a small footprint
without needing to rebuild newlib
- this patch is based on a contribution from Torbjorn Svensson and
Niklas Dahlquist (https://ecos.sourceware.org/ml/newlib/current/017616.html)
Previously, the chacha20 instance would be rekeyed every 1.6MB. This
makes it happen at a random point somewhere in the 1-2MB range.
Feedback deraadt@ visa@, ok tb@ visa@
newlib port: Make REKEY_BASE depend on SIZE_MAX
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
In the incredibly unbelievable circumstance where _rs_init() fails to
allocate pages, don't call abort() because of corefile data leakage
concerns, but simply _exit(). The reasoning is _rs_init() will only fail
if someone finds a way to apply specific pressure against this failure
point, for the purpose of leaking information into a core which they can
read. We don't need a corefile in this instance to debug that. So take
this "lever" away from whoever in the future wants to do that.
Jon Turney
Corinna Vinschen
Carlo Bramini
Sebastian Huber
Andy Koppe
Thomas Schwinge
Hamish McIntyre-Bhatty
Brian Inglis
Takashi Yano
Simon Cook
Ken Brown
Szabolcs Nagy
Markus B. Moessner
Jeff Johnston
tb
djm
dtucker
deraadt
bcook