https://cygwin.com/pipermail/cygwin/2024-February/255397.html
reports a crash on ARM64 probably related to checking x86_64
code on the x86_64 emulator on AArch64.
At least for testing, pull the code checking the host HW
up to be called before trying to evaluate assembler code.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- drop appending .exe.lnk to files
- drop exe_suffixes, it's the same as stat_suffixes for a long time
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
cwdstuff::set has a code snippet handling the case where a process
can't create a handle to a directory, e. g., due to permissions.
Commit 88443b0a22 ("cwdstuff: Don't leave from setting the CWD
prematurely on init") introduced a special case to handle this
situation at process initialization. It also introduces an early
mutex release, which is not required, but ok, because we're in the
init phase. Releasing the mutex twice is no problem since the mutexes
are recursive.
Fast forward to commit 0819679a7a ("Cygwin: cwd: use SRWLOCK
instead of muto"). The mechanical change from a recursive mutex
to a non-recursive SRWLOCK failed to notice that this very specific
situation will release the SRWLOCK twice.
Remove the superfluous release action. While at it, don't set dir to
NULL, but h, since dir will get the value of h anyway later on.
Setting h to NULL may not be necessary, but better safe than sorry.
Reported-by: tryandbuy >tryandbuy@proton.me>
Fixes: 88443b0a22 ("cwdstuff: Don't leave from setting the CWD prematurely on init")
Fixes: 0819679a7a ("Cygwin: cwd: use SRWLOCK instead of muto")
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Given the downsides of NFS symlinks as FIFOs, drop the code
added to recognize them as such.
Fixes: 622fb0776e ("Cygwin: enable usage of FIFOs on NFS")
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Creating real NFS symlinks for device files has a major downside:
The way we store device info requires to change the symlink target
in case of calling chmod(2). This falls flat in two ways:
- It requires to remove and recreate the symlink, so it doesn't
exist for a short period of time, and
- removing fails badly if there's another open handle to the symlink.
Therefore, change this to create FIFOs as shortcut files, just as on
most other filesystems. Make sure to recognize these new shortcuts
on NFS (for devices only) in path handling and readdir.
Fixes: 622fb0776e ("Cygwin: enable usage of FIFOs on NFS")
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
MSFT NFSv3 fakes DOS attributes based on file type and permissions.
Rather than just faking FILE_ATTRIBUTE_DIRECTORY for dirs, fetch the
"real" DOS attributes returned by NFS.
This allows to handle the "R/O" attribute on shortcut files and thus
reading and creating device shortcut files on NFS.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
FIFOs on NFS were never recogized as such in path handling.
stat(2) indicated native FIFOs as FIFOs but the path handling
code didn't set the matching values in the inner symlink checking
code, so the followup behaviour was wrong.
Basically for the same reason, Cygwin-created FIFOs were just treated
as symlinks with weird content by stat(2) as well as path handling.
Add code to enable both types of FIFOs on NFS as Cygwin FIFOs.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Reportedly Windows 11 build 25*** from Insider changed the current
working directory logic a bit, and Cygwin's "magic" (or:
"technologically sufficiently advanced") code needs to be adjusted
accordingly.
This fixes https://github.com/git-for-windows/git/issues/4429
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Per https://pubs.opengroup.org/onlinepubs/9699919799/basedefs/xbd_chap04.html:
"A pathname that begins with two successive slashes may be interpreted
in an implementation-defined manner, although more than two leading
slashes shall be treated as a single slash."
So more than 2 leading slashes are supposed to be folded into one,
which our dirname neglected. Fix that.
Fixes: 24e8fc6872 ("* cygwin.din (basename): Export.")
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Commit c1023ee353 introduced a split between mount flags and
path flags. It didn't initialize symlink_info::path_flags in
path_conv::check, because that's done in symlink_info::check.
However, there are two code paths expecting symlink_info::path_flags
being already initialized and both skip symlink_info::check.
Make sure symlink_info::path_flags is initalized to 0 early in
path_conv::check.
Fixes: c1023ee353 ("Cygwin: path_conv: decouple path_types from mount types")
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Move the drive substitution code after the call to
GetFinalPathNameByHandleW into a local function revert_virtual_drive
and add code to handle non-remote virtual drives, i. e., those
created with the subst command. (Try to) make sure that virtual
drives are never treated like symlinks.
Fixes: 19d59ce75d ("Cygwin: path_conv: Rework handling native symlinks as inner path components")
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Currently it is possible for symlink_info::check to return -1 in case
we're searching for foo and find foo.lnk that is not a Cygwin symlink.
This contradicts the new meaning attached to a negative return value
in commit 19d59ce75d. Fix this by setting "res" to 0 at the beginning
of the main loop and not seting it to -1 later.
Also fix the commentary preceding the function definition to reflect
the current behavior.
Addresses: https://cygwin.com/pipermail/cygwin/2022-August/252030.html
This function is just bad. It really only works for ASCII
chars, everything else is broken after the conversion.
Introduce new helper function sys_mbstouni to replace
RtlCreateUnicodeStringFromAsciiz in hash_path_name.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Remove "32" or "64" from each of the following names: acl32,
aclcheck32, aclfrommode32, aclfrompbits32, aclfromtext32, aclsort32,
acltomode32, acltopbits32, acltotext32, facl32, fchown32, fcntl64,
fstat64, _fstat64, _fstat64_r, ftruncate64, getgid32, getgrent32,
getgrgid32, getgrnam32, getgroups32, getpwuid32, getpwuid_r32,
getuid32, getuid32, initgroups32, lseek64, lstat64, mknod32, mmap64,
setegid32, seteuid32, setgid32, setgroups32, setregid32, setreuid32,
setuid32, stat64, _stat64_r, truncate64.
Remove prototypes and macro definitions of these names.
Remove "#ifndef __INSIDE_CYGWIN__" from some headers so that the new
names will be available when compiling Cygwin.
Remove aliases that are no longer needed.
Include <unistd.h> in fhandler_clipboard.cc for the declarations of
geteuid and getegid.
- If UNC path for DFS is mounted to a drive with drive letter, the
error "Too many levels of symbolic links" occurs when accessing
to that drive. This is because GetDosDeviceW() returns unexpected
string such as "\Device\Mup\DfsClient\;Z:000000000003fb89\dfsserver
\dfs\linkname" for the mounted UNC path "\??\UNC\fileserver\share".
This patch adds a workaround for this issue.
Addresses: https://cygwin.com/pipermail/cygwin/2022-March/250979.html
- If an UNC path is mounted to a drive using SMB3.11, accessing to
the drive fails with error "Too many levels of symbolic links."
This patch fixes the issue.
When trying to create a directory called `xyz` in the presence of a
directory `xyz.lnk`, the Cygwin runtime errors out with an `ENOENT`.
The root cause is actually a bit deeper: the `symlink_info::check()`
method tries to figure out whether the given path refers to a symbolic
link as emulated via `.lnk` files, but since it is a directory, that is
not the case, and that hypothesis is rejected.
However, the `fileattr` field is not cleared, so that a later
`.exists()` call on the instance mistakenly thinks that the symlink
actually exists. Let's clear that field.
This fixes https://github.com/msys2/msys2-runtime/issues/81
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
- The last change in path.cc introduced a bug that causes an error
when accessing a virtual drive which mounts UNC path such as
"\\server\share\dir" rather than "\\server\share". This patch
fixes the issue.
The new GetFinalPathNameW handling for native symlinks in inner path
components is disabled if caller doesn't want to follow symlinks, or
doesn't want to follow reparse points.
The check for a file or dir within /dev/mqueue is accidentally using
the incoming path, which could be a relative path. Make sure to
restore the absolute POSIX path in path_copy and only then test the
path.
Also, move the actual check for a valid path below /dev/mqueue into
the fhandler_mqueue class.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
/dev has been handled as virtual dir in cwdstuff, thus not allowing
to start native apps from /dev as CWD, even if /dev actually exists
on disk. Unfortunately this also affects Cygwin executables started
from a debugger.
When chdir'ing to /dev, check if /dev exists on disk. If so, treat
it as any other existing path.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The mq_open call is just a framework now. This patch moves the
entire functionality into fhandler_mqueue. To support standard
OS calls (as on Linux), make fhandler_mqueue a derived class from
fhandler_disk_file and keep the base handle the handle to the
default stream, to allow implementing O_PATH functionlaity as well
as reading from the file and NOT reading binary message queue data.
Implement a standard fhandler_mqueue::open method, allowing, for
instance, to touch a file under /dev/mqueue and if it doesn't exist,
to create a message queue file.
FIXME: This introduces a BAD HACK into path_conv::check, which needs
reviewing.
Keep the posix path intact in the fhandler, and change get_proc_fd_name
accordingly to return only the basename plus leading slash for
/proc/<PID>/fd.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
POSIX message queues will be moved into NTFS streams.
Extend get_nt_native_path to provide a filename suffix which is not
subject to special character transposition, to allow specifying
a colon.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The old check was insufficient: new insider preview builds of Windows
allow running x86_64 process on ARM64. The IsWow64Process2 function
seems to be the intended way to figure this situation out.
This avoids MAX_PATH-related problems in native tools in case the
virtual drive points to a deep directory
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Rather than fetching the system Windows directory at dll init time
only on 32 bit, fetch it on all platforms. Store as WCHAR and
UNICODE_STRING. Use where appropriate to simplify code.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
commit 456c3a4638 was only going half-way. It handled symlinks and
junction points as inner path components and made realpath return the
correct path, but it ignored drive letter substitution, i. e., virtual
drives created with, e. g.
subst X: C:\foo\bar
It was also too simple. Just returning an error code from
symlink_info::check puts an unnecessary onus on the symlink evaluation
loop in path_conv::check.
Rework the code to use GetFinalPathNameByHandle, and only do this after
checking the current file for being a symlink failed.
If the final path returned by GetFinalPathNameByHandle is not the same
as the incoming path, replace the incoming path with the POSIXified
final path. This also short-circuits path evaluation, because
path_conv::check doesn't have to recurse over the inner path components
multiple times if all symlinks are of a native type, while still getting
the final path as end result.
Virtual drives are now handled like symlinks. This is a necessary change
from before to make sure virtual drives are handled identically across
different access methods. An example is realpath(1) from coreutils. It
doesn't call readlink(2), but iterates over all path components using
lstat/readlink calls. Both methods should result in the same real path.
Fixes: 456c3a4638 ("path_conv: Try to handle native symlinks more sanely")
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Commit 456c3a4638 added a workaround when handling paths with native
symlinks as inner path components. This patch introduced a problem for
paths handled by the WOW64 File System Redirector (FSR).
Fix this problem by not performing the new code from commit 456c3a4638
for paths under the Windows directory. Only do this in WOW64.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
For local paths, add a check if the inner path components contain native
symlinks or junctions. Compare the incoming path with the path returned
by NtQueryInformationFile(FileNameInformation). If they differ, there
must be at least one native symlink or junction in the path. If so,
treat the currently evaluated file as non-existant. This forces
path_conv::check to backtrack inner path components until we eliminated
all native symlinks or junctions and have a normalized path.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
When the Windows Store version of Python is installed, so-called "app
execution aliases" are put into the `PATH`. These are reparse points
under the hood, with an undocumented format.
We do know a bit about this format, though, as per the excellent analysis:
https://www.tiraniddo.dev/2019/09/overview-of-windows-execution-aliases.html
The first 4 bytes is the reparse tag, in this case it's
0x8000001B which is documented in the Windows SDK as
IO_REPARSE_TAG_APPEXECLINK. Unfortunately there doesn't seem to
be a corresponding structure, but with a bit of reverse
engineering we can work out the format is as follows:
Version: <4 byte integer>
Package ID: <NUL Terminated Unicode String>
Entry Point: <NUL Terminated Unicode String>
Executable: <NUL Terminated Unicode String>
Application Type: <NUL Terminated Unicode String>
Let's treat them as symbolic links. For example, in this developer's
setup, this will result in the following nice output:
$ cd $LOCALAPPDATA/Microsoft/WindowsApps/
$ ls -l python3.exe
lrwxrwxrwx 1 me 4096 105 Aug 23 2020 python3.exe -> '/c/Program Files/WindowsApps/PythonSoftwareFoundation.Python.3.7_3.7.2544.0_x64__qbz5n2kfra8p0/python.exe'
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Allow check_reparse_point_target to recognize reparse points with
reparse tag IO_REPARSE_TAG_AF_UNIX. These are used in recent versions
of Windows 10 to represent AF_UNIX sockets.
check_reparse_point_target now returns PATH_REP on files of this type,
so that they are treated as known reparse points (but not as sockets).
This allows tools like 'rm', 'ls', etc. to operate on these files.
Addresses: https://cygwin.com/pipermail/cygwin/2020-September/246362.htmlhttps://cygwin.com/pipermail/cygwin/2021-January/247666.html
Corinna Vinschen
Johannes Schindelin
Ken Brown
Takashi Yano
Jon Turney
Jeremy Drake